'acidic media suitable'

Half Round Tube Shield Half Round Tube Shields from Ladhani Metal Corporation are durable, precisely fabricated components used to protect boiler tubes from erosion, scaling, and corrosion caused by flue gas flow and particulate impact. Their half-round, semi-cylindrical structure is designed to conform closely to tube surfaces, especially in areas subjected to repeated thermal cycling or mechanical wear. These shields are extensively applied in boilers, heat exchangers, and waste heat recovery systems. 1Cr25Ni20Si2 Half Round Tube Shield for LTSH Tube The 1Cr25Ni20Si2 Half Round Tube Shield is manufactured from a high-performance chromium-nickel-silicon alloy designed for elevated-temperature service. With approximately 25% chromium, 20% nickel, and added silicon content, this alloy exhibits superior resistance to oxidation, thermal fatigue, and carburization. Its mechanical stability under high-temperature operation makes it a preferred material for protective applications in Low Temperature Superheater (LTSH) zones. The Low Temperature Superheater (LTSH) is a section in a boiler where saturated steam from the steam drum is superheated to a moderately higher temperature before entering the high-temperature superheater stages. Positioned in areas with relatively lower flue gas temperatures, the LTSH helps improve thermal efficiency and reduces moisture content in steam. Due to constant exposure to abrasive flue gases and ash, LTSH tubes are prone to wear and require protective shielding, such as half round tube shields, to extend service life. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of 1Cr25Ni20Si2 Half Round Tube Shields, offering high-performance shielding solutions tailored for harsh, heat-intensive industrial environments. Chemical Composition of 1Cr25Ni20Si2 – Chromium-Nickel-Silicon Heat-Resistant Steel • Carbon (C): ≤ 0.10% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): 1.5 – 2.5% • Chromium (Cr): 24.0 – 27.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Applications: Suitable for high-temperature steam systems, where resistance to flue gas corrosion, thermal oxidation, and mechanical fatigue is essential. Uses • Protects LTSH tubes in thermal power plants from scaling and soot-induced wear • Shields heat exchanger tubes from low-temperature corrosive gases and ash deposition • Used in boilers and HRSGs exposed to fluctuating temperature and combustion by-products • Suitable for high-wear areas in biomass boilers and incineration systems • Enhances operational life of reheater and superheater coil sections Features • High thermal stability – Withstands temperature fluctuations without structural deformation • Excellent oxidation and carburization resistance – Ideal for extended high-temperature exposure • Custom fit – Designed according to specific tube radii and coil geometries for accurate alignment • Reduced maintenance – Shields tubes from damage, minimizing downtime and repair costs • Versatile installation – Compatible with weld-on, clamp-on, and banding installation techniques • Long service life – Resistant to scaling and degradation in heat-intensive environments Applications • power generation boilers – Provides long-term protection for LTSH coils in flue gas zones • WHRBs and HRSGs – Used in low-temperature convection sections to counteract erosive gas flow • chemical and refining industries – Prevents corrosion in heat exchangers handling acidic media • marine steam systems – Protects low-temperature sections exposed to salt-laden air and gases • waste-to-energy plants – Shields boiler tubing from high-volume particulate streams Conclusion The 1Cr25Ni20Si2 Half Round Tube Shield for LTSH Tube by Ladhani Metal Corporation – manufacturer, supplier, and exporter – is a high-performance component designed for superior protection of boiler tubes in corrosive and thermally aggressive environments. It ensures durability, thermal resistance, and long-term reliability in LTSH and similar service applications. For specifications, custom fabrication, or bulk orders, contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precisely engineered components used to safeguard boiler tubes, superheaters, and heat exchanger coils from erosion, scaling, thermal stress, and high-temperature corrosion. Their half-round construction enables quick and secure installation over straight or curved tube surfaces, offering long-term protection and minimizing maintenance in industrial heating systems, power plants, and petrochemical facilities. 1Cr18Ni9Ti U Type Inner Half Round Tube Shield The 1Cr18Ni9Ti U Type Inner Half Round Tube Shield is manufactured from a titanium-stabilized austenitic stainless steel grade, offering superior resistance to intergranular corrosion and oxidation at elevated temperatures. This grade is particularly effective in welded applications and thermal systems subjected to cycling and corrosive media. The inner U-type configuration is designed to shield the inside curvature of U-bend tubes, where turbulent gas flow, slag, and thermal concentration often cause accelerated wear and scaling. • Inner U Type Half Round Tube Shield – Designed to protect the internal arc of U-bend tubes from high-temperature scaling, slag impact, and turbulent gas erosion. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of 1Cr18Ni9Ti U Type Inner Half Round Tube Shields, offering durable, high-performance shielding solutions for critical thermal systems. Chemical Composition of 1Cr18Ni9Ti – Titanium-Stabilized Austenitic Stainless Steel • Carbon (C): ≤ 0.12% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 17.0 – 19.0% • Nickel (Ni): 8.0 – 11.0% • Titanium (Ti): Stabilized as required • Iron (Fe): Balance Applications: Ideal for welded and high-temperature systems exposed to oxidation, intergranular corrosion, and chloride-bearing flue gases. Uses • Protects inner arcs of U-bend tubes in superheaters and reheaters of thermal power plants • Installed in return bends of waste heat recovery boilers (WHRBs) and HRSGs facing slag and scale accumulation • Applied in curved tube sections in chemical reactors and heat exchangers exposed to acidic or oxidizing gases • Suitable for marine and coastal heating systems where chlorides and moisture are present • Used in food processing, metallurgical furnaces, and process plants requiring stable, high-temperature performance Features • Excellent intergranular corrosion resistance – Stabilized with titanium to prevent carbide precipitation • Inner arc protection – Shields high-stress areas from gas turbulence and heat-induced damage • High-temperature performance – Reliable up to 870°C in oxidizing environments • Custom fit – Fabricated to match specific tube diameters and bend radii for precise installation • Easy to install – Suitable for clamp-on, weld-on, or banding methods • Long service life – Reduces frequency of tube replacement and supports consistent thermal performance Applications • thermal power generation – Inner arc protection in U-bend tubes exposed to combustion gases and temperature fluctuations • petrochemical and fertilizer plants – Shields tube bends in reactors and reformers exposed to acidic gases • waste heat recovery – Guards inner surfaces of tube coils in WHRBs and HRSGs from scaling and corrosion • marine heat exchangers – Suitable for use in systems exposed to saltwater vapors and high humidity • industrial furnaces and incinerators – Provides internal bend protection under severe thermal cycling Conclusion The 1Cr18Ni9Ti U Type Inner Half Round Tube Shield by Ladhani Metal Corporation – manufacturer, supplier, and exporter – delivers robust and reliable protection for U-bend tubes operating in corrosive and high-temperature environments. With titanium stabilization and a custom-engineered fit, this shield ensures extended tube life, reduced wear, and optimized performance in industrial heating systems. For technical assistance, custom specifications, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are engineered to provide robust protection for boiler, superheater, and heat exchanger tubes against high-temperature erosion, slag deposition, scaling, and corrosive gas exposure. These shields are essential in power plants, petrochemical systems, and high-heat industrial environments where tubes are vulnerable to rapid degradation due to thermal cycling and particulate flow. The half-round design ensures quick installation over curved or straight tube sections without system disassembly. U Type Inner Half Round Tube Shield The U Type Inner Half Round Tube Shield is specially designed to protect the inner curvature of U-bend tubes, which often experiences high levels of turbulence, localized corrosion, and scaling due to gas redirection and mechanical stress. Inner shields are commonly paired with outer shields for full bend protection and are manufactured in a wide range of stainless steel and high-temperature alloy grades, customized to specific environmental and system requirements. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of U Type Inner Half Round Tube Shields in various material grades, offering tailored protection solutions for high-temperature and corrosive conditions across multiple industries. Available Grades • SS 304 – General-use stainless steel with good corrosion and heat resistance • SS 304L – Low-carbon version for improved weldability and reduced carbide precipitation • SS 316 – Molybdenum-added alloy with excellent resistance to pitting and chlorides • SS 316L – Low-carbon alternative for superior corrosion resistance in welded environments • SS 310 – Austenitic high-temperature steel with excellent oxidation resistance • SS 310S – Low-carbon SS 310 for better thermal fatigue performance • SS 410 – Martensitic stainless steel with good strength and abrasion resistance • SS 420 – High-hardness martensitic grade ideal for erosion-prone zones • SS 430 – Ferritic grade for moderate corrosion and oxidation resistance • 1Cr13 – Martensitic stainless steel offering mechanical protection and heat resistance • 1Cr18Ni9Ti – Titanium-stabilized grade offering resistance to intergranular corrosion • Cr23Ni13 – High-temperature alloy with excellent oxidation and scaling resistance • Cr25Ni20 – High-performance grade for extreme thermal and oxidizing conditions • 1Cr25Ni20Si2 – Heat-resistant alloy with silicon for improved scale resistance • 1Cr20Ni14Si2 – Alloy for thermal fatigue protection and oxidizing environments Applications • Inner arc protection in U-bend tubes of boilers, superheaters, and reheaters • Shielding internal curves of tubes in waste heat recovery boilers (WHRBs) and HRSGs • Corrosion and scale defense for inner tube arcs in petrochemical and steam reforming units • Inner surface protection in furnace coils, reformers, and incinerators • Installed in chemical plants and thermal systems prone to turbulent flue gas exposure Features • Focused inner arc protection – Guards the most corrosion- and scale-prone surface of U-bend tubes • Material flexibility – Available in multiple grades for varied thermal, mechanical, and chemical requirements • Excellent thermal resistance – Withstands extreme temperatures depending on material (up to 1150°C+) • Precise fit – Custom-fabricated to match exact tube dimensions and bend radii • Simple installation – Mounted using clamps, stainless bands, or welding techniques • Dual-shield pairing – Can be combined with outer shields for complete U-bend coverage • Long-lasting performance – Enhances tube reliability and reduces maintenance in high-wear zones Applications • power generation – Protects U-bend inner surfaces in superheaters and economizers from flue gas turbulence • petrochemical plants – Shields inside arcs in reformers and heaters exposed to chlorides and acidic gases • waste heat systems – Installed in HRSGs and WHRBs to prevent slag and oxidation on internal bends • chemical industries – Suitable for reactors and high-temperature exchangers handling corrosive media • cement and metallurgy – Used in systems exposed to flame, dust, and oxidizing atmospheres Conclusion The U Type Inner Half Round Tube Shield by Ladhani Metal Corporation – manufacturer, supplier, and exporter – is a precision-engineered solution for protecting the inner arc of U-bend tubes against corrosion, scale formation, and thermal damage. Available in a wide range of stainless steels and high-temperature alloys, these shields provide durable, customizable, and easy-to-install protection for critical components in power, chemical, and thermal processing systems. For custom sizes, technical assistance, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered components used to protect boiler and heat exchanger tubes from erosion, scaling, and high-temperature corrosion. These shields are widely applied in industrial systems exposed to thermal cycling, aggressive gases, and particulate flow. Their half-round shape allows for simple and secure installation over straight or curved tube surfaces, extending tube life and reducing maintenance needs. SS 316L U Type Outer Half Round Tube Shield The SS 316L U Type Outer Half Round Tube Shield is manufactured from SS 316L, a low-carbon molybdenum-bearing austenitic stainless steel known for its superior corrosion resistance and excellent weldability. This outer U-type configuration is designed to protect the external arc of U-bend tubes in boilers, superheaters, heat exchangers, and waste heat recovery systems. The low carbon content of SS 316L reduces the risk of sensitization and intergranular corrosion, making it ideal for welded systems exposed to chlorides, acidic gases, and steam. • Outer U Type Half Round Tube Shield – Offers full coverage to the outer curvature of U-bend tubes, shielding against erosion, slag buildup, high-temperature oxidation, and chemical attack. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of SS 316L U Type Outer Half Round Tube Shields, delivering precision-built, long-lasting solutions for demanding industrial applications. Chemical Composition of SS 316L – Low-Carbon Austenitic Stainless Steel • Carbon (C): ≤ 0.03% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% • Iron (Fe): Balance Applications: Suited for high-temperature and corrosive environments requiring superior resistance to chlorides, acids, and weld-induced corrosion. Uses • Protection of U-bend outer arcs in superheaters and reheaters in thermal and nuclear power stations • Shielding tube bends in chemical heat exchangers and steam reformers exposed to chlorides and acidic gases • Outer bend coverage for WHRB and HRSG tubes subjected to flue gas flow, scaling, and erosion • Applied to return bends in condensers and evaporators in marine and coastal facilities • Ideal for pharmaceutical, food processing, and clean energy systems requiring low carbon stainless steel Features • Exceptional corrosion resistance – Molybdenum addition enhances resistance to pitting, crevice corrosion, and chlorides • Low carbon content – Minimizes the risk of sensitization and intergranular corrosion after welding or high-heat exposure • High-temperature capability – Maintains performance under cyclic heating and thermal stress conditions • Precision fitment – Custom-fabricated to match tube diameter and radius, ensuring tight, vibration-free installation • Easy installation – Mountable with clamps, banding, or tack welds without requiring shutdown or disassembly • Long-term durability – Withstands corrosive gases, scaling, and erosion, extending tube life and reducing downtime Applications • thermal power plants – Protects outer arcs of U-bend tubes from flue gas erosion and scaling in high-temperature zones • chemical and petrochemical plants – Shields return bends in reformers and exchangers operating with corrosive process media • waste heat recovery systems – Provides protection in WHRBs and HRSGs from thermal fatigue and particulate-laden flue gases • marine and offshore facilities – Suitable for chloride-rich environments such as desalination plants and coastal condensers • process and pharmaceutical industries – Ensures corrosion-resistant performance in systems with stringent cleanliness and durability requirements Conclusion The SS 316L U Type Outer Half Round Tube Shield by Ladhani Metal Corporation—manufacturer, supplier, and exporter—is a corrosion-resistant, precision-engineered solution for protecting U-bend tube outer surfaces in boilers and heat exchangers. Its low carbon content, molybdenum-enhanced alloy composition, and excellent weldability make it ideal for harsh industrial environments requiring high performance and reliability. Designed for easy installation and long service life, it is a trusted choice for power, petrochemical, marine, and process applications. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered components used to protect boiler and heat exchanger tubes from erosion, scaling, and high-temperature corrosion. These shields are widely applied in industrial systems exposed to thermal cycling, aggressive gases, and particulate flow. Their half-round shape allows for simple and secure installation over straight or curved tube surfaces, extending tube life and reducing maintenance needs. SS 316 U Type Outer Half Round Tube Shield The SS 316 U Type Outer Half Round Tube Shield is manufactured from SS 316, a molybdenum-bearing austenitic stainless steel known for its superior corrosion resistance, especially against chlorides, acidic media, and pitting. This outer U-type configuration is specifically designed to protect the outer curvature of U-bend tubes in boilers, superheaters, heat exchangers, and waste heat recovery systems. It offers effective shielding in high-temperature, corrosive environments where external tube surfaces are exposed to flue gases, slag accumulation, and erosion. • Outer U Type Half Round Tube Shield – Covers the external arc of U-bend tubes, guarding against flame impingement, thermal degradation, and corrosive gas attack. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of SS 316 U Type Outer Half Round Tube Shields, delivering precision solutions for demanding thermal and chemical processing applications. Chemical Composition of SS 316 – Austenitic Stainless Steel with Molybdenum • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% • Iron (Fe): Balance Applications: Ideal for high-temperature systems operating in corrosive environments with exposure to chlorides, acidic gases, steam, and thermal cycling. Uses • Outer arc protection of U-bend tubes in superheaters and reheaters in thermal and nuclear power plants • Shielding curved tube bends in petrochemical heat exchangers and steam reformers • Coverage for WHRB and HRSG outer U-bend sections exposed to abrasive and corrosive flue gas streams • Applied to return bends in condensers, evaporators, and marine heat exchangers exposed to saline or acidic media • Suitable for process industries requiring excellent corrosion resistance and thermal stability Features • Excellent corrosion resistance – Molybdenum-enhanced alloy provides high resistance to pitting, crevice corrosion, and chloride attack • Outer U-bend protection – Shields the most vulnerable outer curvature from erosion, heat stress, and slag impact • High-temperature durability – Maintains structural stability under continuous and cyclic heat conditions • Custom fitment – Manufactured to precisely match tube diameter and bend radius for a snug and vibration-free installation • Easy to install – Secured with clamps, tack welds, or stainless steel bands without system disassembly • Long service life – Reduces tube damage, extends maintenance intervals, and enhances operational efficiency Applications • power generation – Installed in U-bend tube outer arcs in superheaters and reheaters to prevent oxidation and surface scaling • petrochemical and refinery plants – Used in high-temperature heat exchangers and reformers exposed to corrosive process gases • waste heat recovery boilers – Shields outer tube bends from flue gas erosion and slag accumulation in WHRBs and HRSGs • chemical and fertilizer plants – Protects external surfaces of U-bends in reactors and ammonia reformers against acidic gas attack • marine and coastal installations – Ideal for heat exchangers and condensers operating in chloride-laden and saline environments Conclusion The SS 316 U Type Outer Half Round Tube Shield by Ladhani Metal Corporation—manufacturer, supplier, and exporter—is a robust and corrosion-resistant solution for protecting the outer arcs of U-bend tubes in heat exchangers, boilers, and thermal processing equipment. With superior resistance to chlorides, acids, and oxidizing gases, along with high-temperature performance and ease of installation, this shield is a dependable choice for power, petrochemical, and marine industry applications. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered components used to protect boiler and heat exchanger tubes from erosion, scaling, and high-temperature corrosion. These shields are widely applied in industrial systems exposed to thermal cycling, aggressive gases, and particulate flow. Their half-round shape allows for simple and secure installation over straight or curved tube surfaces, extending tube life and reducing maintenance needs. SS 310S U Type Outer Half Round Tube Shield The SS 310S U Type Outer Half Round Tube Shield is designed using SS 310S, a low-carbon austenitic stainless steel known for its excellent resistance to oxidation, high-temperature strength, and enhanced weldability. This outer U-type shield is specifically engineered to cover and protect the outer arc of U-bend tube sections in superheaters, reheaters, waste heat recovery systems, and high-temperature heat exchangers. With its high chromium and nickel content, SS 310S provides superior performance in oxidizing and carburizing environments while maintaining structural stability during prolonged thermal cycling. • Outer U Type Half Round Tube Shield – Shields the external curvature of U-bend tubes from slag deposition, hot gas erosion, scale formation, and high-temperature fatigue. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of SS 310S U Type Outer Half Round Tube Shields, offering high-performance solutions for critical thermal and process applications across industries. Chemical Composition of SS 310S – Low-Carbon Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.50% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Applications: Best suited for high-temperature, oxidizing, and carburizing environments where thermal stability, scale resistance, and corrosion protection are essential. Uses • Outer surface protection of U-bend tubes in superheaters and reheaters of thermal and industrial power plants • Shielding of return bends in petrochemical reformers, process heaters, and high-temperature exchangers • Applied to outer arcs in WHRBs and HRSGs subjected to thermal cycling, slag erosion, and hot flue gas exposure • Suitable for use in chemical and gas processing units handling oxidizing or acidic exhausts at elevated temperatures • Ideal for incinerator tubes, radiant coils, and furnace bends operating under continuous or cyclic heat conditions Features • Outstanding high-temperature strength – Performs effectively up to 1150°C with excellent resistance to scaling and oxidation • Enhanced weldability – Low carbon content minimizes the risk of sensitization and intergranular corrosion after welding • Outer U-bend coverage – Designed for targeted protection where erosion and thermal impact are most severe • Precision fitment – Manufactured to exact tube radius and diameter specifications for tight, vibration-free installation • Quick installation – Easily mounted using clamps, tack welds, or stainless steel banding without system disassembly • Long-term durability – Resistant to cracking, scaling, and corrosion under thermal fatigue, reducing maintenance and downtime Applications • thermal power plants – Installed on U-bend tube outer curves in superheaters and reheaters for oxidation and erosion protection • petrochemical plants – Used in reformers and cracking furnaces exposed to high-temperature and oxidizing environments • waste heat recovery systems – Protects return bends in WHRBs and HRSGs from hot gas flow, slag buildup, and scaling • chemical and gas processing – Shields bends in high-temperature exchangers and preheaters from corrosive and oxidizing media • furnaces and industrial incinerators – Applied to radiant tubes and burner bends subjected to direct flame and thermal cycling Conclusion The SS 310S U Type Outer Half Round Tube Shield by Ladhani Metal Corporation—manufacturer, supplier, and exporter—is a premium solution for protecting U-bend tube outer arcs in boilers and heat exchangers exposed to severe heat and gas flow conditions. With excellent oxidation resistance, low carbon content for improved weldability, and precision design for long-lasting performance, this shield enhances the lifespan and reliability of thermal systems across a wide range of industrial sectors. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-formed protective components used to shield exposed tubes in boilers, heat exchangers, and high-temperature piping systems. Designed to withstand harsh environments, they provide long-term protection against corrosion, erosion, and thermal damage, significantly improving the operational life and reliability of industrial systems. SS 316 Half Round Tube Shield The SS 316 Half Round Tube Shield is a semi-cylindrical cover made from austenitic stainless steel grade 316. Known for its superior corrosion resistance and mechanical strength, SS 316 is especially effective in chloride-rich environments such as marine, chemical, and coastal processing industries. The shield is engineered to fit over existing tubes, acting as a barrier against high-temperature gases, steam erosion, and corrosive media. Its molybdenum-enriched composition enhances pitting and crevice corrosion resistance, making it ideal for aggressive applications. Chemical Composition of SS 316 – Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% • Iron (Fe): Balance Uses • Boiler Tube Protection – Provides a robust shield against corrosive flue gases, preventing tube thinning and extending service intervals in industrial boilers. • Heat Exchanger Tube Protection – Reduces erosion and scaling in process systems exposed to fluctuating temperatures and aggressive fluids. • Marine and Coastal Applications – Ideal for protecting piping and steam lines in saltwater environments where chloride-induced corrosion is a major concern. • Chemical Process Tubing – Shields tubes exposed to acidic or caustic compounds, minimizing localized corrosion and chemical wear. • Pharmaceutical and Food Plants – Protects steam and utility tubes while maintaining hygiene and resistance to cleaning agents and sanitizers. Features • Excellent Corrosion Resistance – Molybdenum addition enhances resistance to pitting, crevice corrosion, and chemical attack. • High Strength and Durability – Withstands mechanical stress and thermal cycling without deformation or degradation. • Precision Fit – Half-round profile allows easy installation and secure fitting over tubes with minimal disruption to system performance. • Hygienic Material – Non-reactive and easy to clean, suitable for environments requiring sanitary conditions. • Customizable – Available in a variety of wall thicknesses, diameters, lengths, and mounting styles to meet specific operational needs. • Optional Finishes – Pickled, passivated, and bright annealed surface finishes available for improved appearance and added protection. Applications • Power Generation Boilers – Used in high-pressure steam systems to shield tubes from gas erosion and oxidation. • Chemical Processing Units – Protects tubes in acidic, alkaline, and oxidizing environments across chemical plants and refineries. • Marine Boilers and Engines – Installed on tubes and exhaust lines in marine vessels to resist chloride-induced corrosion. • Pharmaceutical Facilities – Suitable for clean steam systems and sterile environments requiring high resistance to chemical sanitizers. • Food and Beverage Industry – Used in pasteurization, CIP lines, and steam piping where corrosion resistance and cleanliness are essential. • Desalination Plants – Guards tubing systems in brine and saltwater processing units against aggressive corrosion and scaling. Conclusion The SS 316 Half Round Tube Shield by Ladhani Metal Corporation is an advanced protective solution for critical tubing systems operating in corrosive and high-temperature environments. Its enhanced chemical resistance, mechanical strength, and adaptability to sanitary and marine conditions make it an ideal choice for industries requiring long-term reliability and safety. Designed with precision and manufactured to meet strict industrial standards, these shields ensure prolonged tube life, reduced downtime, and improved system performance. Custom-fabricated to match your application, Ladhani Metal Corporation provides dependable shielding solutions trusted across industries worldwide. For detailed specifications, inquiries, or custom orders, please contact Ladhani Metal Corporation.

DIN 2630 Monel flanges PN 2.5 are precision-engineered weld neck flanges manufactured according to the DIN 2630 standard. These flanges are designed for low-pressure applications up to 2.5 bar (36.25 psi), offering outstanding resistance to corrosion, especially in marine and chemical environments. Fabricated from premium Monel alloys such as Monel 400 and Monel K500, these flanges provide excellent mechanical strength and durability, making them ideal for challenging service conditions in low-pressure piping systems. Ladhani Metal Corporation is a globally recognized manufacturer and supplier of Monel flanges, known for delivering high-quality products with advanced engineering precision. Our DIN 2630 PN 2.5 Monel weld neck flanges are extensively used in industries such as marine, chemical processing, oil and gas, and power generation, where superior corrosion resistance and reliability are essential. Each flange is produced to meet stringent industry standards for safety, performance, and longevity. Pressure Rating: • PN 2.5 (2.5 bar / 36.25 psi): Suitable for low-pressure applications requiring corrosion-resistant materials with excellent mechanical integrity. Flange Type: • Weld Neck Flanges Designed with a long tapered hub to enhance stress distribution and minimize turbulence, providing structural reliability and smooth fluid flow in demanding systems. • Flat Face (FF) Flanges Flat face flanges are ideal for use with cast components or soft gasket materials, ensuring uniform gasket compression in low-pressure environments. Monel Grades and Full Composition: Monel 400 (UNS N04400) • Nickel (Ni): ≥ 63.0% • Copper (Cu): 28.0 – 34.0% • Iron (Fe): 2.0 – 3.0% • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 0.5% • Carbon (C): ≤ 0.3% Applications: Exceptional resistance to seawater, acids, and alkalis. Widely used in marine applications, chemical and hydrocarbon processing, and heat exchangers. Monel K500 (UNS N05500) • Nickel (Ni): ≥ 63.0% • Copper (Cu): 27.0 – 33.0% • Aluminum (Al): 2.3 – 3.15% • Titanium (Ti): 0.35 – 0.85% • Iron (Fe): ≤ 2.0% • Manganese (Mn): ≤ 1.5% • Carbon (C): ≤ 0.25% Applications: Precipitation-hardened alloy offering greater strength and hardness than Monel 400 while retaining excellent corrosion resistance. Used in pump shafts, valves, and marine equipment. Applications of DIN 2630 Monel Flanges PN 2.5: • Marine Industry Ideal for use in seawater piping, heat exchangers, and ballast systems where corrosion resistance is critical. • Chemical Processing Utilized in process piping carrying corrosive chemicals and acidic media under low pressure. • Oil and Gas Industry Suitable for sour gas environments, offshore drilling platforms, and processing equipment exposed to corrosive fluids. • Power Generation Used in cooling and condensate systems where resistance to brine and steam is required. Key Features: • Manufactured in accordance with DIN 2630 standards • PN 2.5 pressure class designed for low-pressure applications • Weld neck design ensures better stress handling and flow performance • Flat face option available for uniform gasket sealing • Made from corrosion-resistant Monel 400 and Monel K500 alloys • High mechanical strength and excellent resistance to marine and chemical corrosion • Custom sizes, specifications, and finishes available upon request Conclusion: DIN 2630 Monel Flanges PN 2.5 from Ladhani Metal Corporation provide an ideal solution for low-pressure systems operating in aggressive and corrosive environments. With superior mechanical strength and outstanding resistance to seawater, acids, and other chemicals, these flanges are a reliable choice for critical applications across various industries. For custom configurations, technical consultation, or pricing details, contact Ladhani Metal Corporation.

DIN 2630 stainless steel flanges PN 2.5 are precision-fabricated weld neck flanges produced in accordance with the DIN 2630 standard. These flanges are engineered for low-pressure applications up to 2.5 bar (36.25 psi), providing reliable and leak-resistant connections in light-duty and non-critical piping systems. Manufactured from premium stainless steel grades including 304, 316, and 321, they offer excellent corrosion resistance, mechanical stability, and longevity even in mildly corrosive or intermittent industrial environments. Ladhani Metal Corporation is a globally trusted manufacturer and supplier of stainless steel flanges, known for delivering consistent quality and engineering precision. Ladhani Metal Corporation ensures each flange meets relevant industrial standards and environmental requirements. Pressure Rating: • PN 2.5 (2.5 bar / 36.25 psi): Suitable for low-pressure pipeline systems that require basic joint integrity and corrosion resistance. Flange Type: • Weld Neck Flanges Designed with a long tapered hub to support pipe alignment and reduce stress at the base of the flange. Ensures steady flow transition with minimal turbulence. • Flat Face (FF) Flanges Flat face design ensures even gasket compression and is preferred in systems using cast components or soft gasket materials. Stainless Steel Grades and Full Composition: Stainless Steel 304 • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 10.5% • Carbon (C): ≤ 0.08% (304), ≤ 0.03% (304L) • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Ideal for general-purpose low-pressure systems including potable water lines, food-grade applications, and non-aggressive chemical piping. Stainless Steel 316 • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% • Carbon (C): ≤ 0.08% (316), ≤ 0.03% (316L) • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Offers higher corrosion resistance for systems handling chlorinated water, cleaning agents, or mildly acidic substances. Common in pharmaceutical and marine-grade piping. Stainless Steel 321 • Chromium (Cr): 17.0 – 19.0% • Nickel (Ni): 9.0 – 12.0% • Titanium (Ti): ≥ 5 × C (typically 0.20 – 0.70%) • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Best suited for moderate temperature and corrosion conditions. Often used in low-pressure exhaust lines, thermal processing, and food-grade heat equipment. Applications of DIN 2630 Stainless Steel Flanges PN 2.5: • Water Supply and Treatment Used in potable and greywater systems requiring low-pressure fluid conveyance. • Food and Beverage Industry Ideal for hygienic piping with low flow rates and non-corrosive media. • Chemical Distribution Used in systems handling diluted or non-aggressive chemicals. • HVAC and Ventilation Suited for duct flanges and connections in air-handling systems. Key Features: • Compliant with DIN 2630 standards • PN 2.5 pressure class for low-pressure service • Weld neck design for improved pipe-flange connection • Available in stainless steel grades 304, 316, and 321 • Flat face configuration for even gasket contact • Corrosion-resistant and long-lasting under mild mechanical loads • Suitable for food-grade, chemical, and HVAC systems • Custom sizes, finishes, and material grades available upon request Conclusion: DIN 2630 Stainless Steel Flanges PN 2.5 from Ladhani Metal Corporation are optimized for low-pressure industrial applications where corrosion resistance, hygiene, and operational simplicity are key. Made from high-grade stainless steel materials, these weld neck flanges offer a reliable, economical solution for various sectors including water distribution, food processing, and light chemical service. For custom dimensions, technical consultation, or pricing details, contact Ladhani Metal Corporation today.