IS 6911 SS X02Cr17Ni12Mo2 Sheet, Plate & Coil

ISO 683-11 Carbon Steel Bars are case hardening (carburizing) non-alloy steels designed for components requiring a hard, wear-resistant surface with a tough and ductile core after carburizing and heat treatment. These steels are widely used in automotive and engineering applications where surface hardness and core strength are essential. Manufactured in accordance with ISO 683-11, this specification defines the technical delivery conditions, chemical composition, and mechanical properties for non-alloy case hardening steels supplied in the form of bars, rods, and other semi-finished products. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of ISO 683-11 Carbon Steel Bars, supplied with mill test certificates and strict quality inspection as per international standards. Forms of Supply (as per specification): Hot rolled round bars, Black bars, Bright bars, Cold drawn bars, Peeled bars, Turned bars, Ground bars, Forged round bars Available Grades (as per ISO 683-11): C10, C15E4, C15E M2 (2a), C16E4, C16E M2 (3a), 20Cr4 (4), 20CrS4, 16MnCr5 (5), 16MnCrS5 (5a), 20MnCr5 (6), 20MnCrS5, 18CrMo4 (7), 18CrMoS4 (7a), 15NiCr13 (11), 20NiCrMo2 (12), 20NiCrMoS2 (12a), 17NiCrMo6 (13), 18CrNiMo7 (14) Explanation of Designation: • C – Carbon steel • Number – Approximate carbon content multiplied by 100 • Alloying elements (Cr, Mn, Ni, Mo) indicate alloy steel variants for improved hardenability • E – Special quality steel with controlled phosphorus and sulphur • S – Free machining variant with higher sulphur • Numbers in brackets – Reference to standard grade grouping Typical Chemical Composition (varies by grade): • Carbon (C): 0.10 – 0.25 depending on grade • Manganese (Mn): Improves strength and hardenability • Chromium (Cr), Nickel (Ni), Molybdenum (Mo): Present in alloy grades for enhanced performance • Silicon (Si): Used as deoxidizer • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.035 (higher in S grades) Mechanical Properties (Core, typical normalized condition): • Tensile Strength: 350 – 700 MPa (depending on grade) • Yield Strength: ≥ 220 MPa • Elongation: ≥ 20% • Hardness (Core): 110 – 200 HB After carburizing and quenching, the surface hardness can reach approximately 58 – 62 HRC depending on case depth and heat treatment conditions. Key Features: • Excellent carburizing response • Wide range of carbon and alloy case hardening grades • Good machinability in annealed condition • Tough and ductile core after heat treatment • Uniform case hardening characteristics Material Characteristics: ISO 683-11 steel bars include both plain carbon and low alloy case hardening steels. These materials are designed to develop a hard outer layer while maintaining a tough inner core, ensuring wear resistance combined with impact strength and durability. Applications: • Gears and pinions • Shafts and spindles • Automotive transmission components • Bushings and pins • Couplings and mechanical parts • Heavy-duty engineering components Conclusion: Ladhani Metal Corporation supplies high-quality ISO 683-11 Carbon Steel Bars in a wide range of grades, sizes, and finishes. With excellent carburizing properties and enhanced mechanical performance, these steels are widely used in automotive and industrial engineering sectors. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation. #ISO68311 #ISO68311Steel #CaseHardeningSteel #CaseHardeningSteelBars #AlloySteelBars #EngineeringSteel #CarburizingSteel #SurfaceHardeningSteel #IndustrialSteelBars #SteelBarsSupplier #AlloySteelSupplier #SteelManufacturer #SteelExporter #SteelStockist #SteelIndia #ENSteelGrades #16MnCr5 #20MnCr5 #18CrNiMo7 #17CrNiMo6 #GearSteel #AutomotiveSteel #ForgingSteel #MachiningSteel #HighStrengthSteel #HeatTreatableSteel #QuenchedAndTemperedSteel #SteelRoundBar #SteelFlatBar #SteelSquareBar #SteelHexBar #BrightBars #HotRolledBars #ColdDrawnBars #AnnealedSteel #NormalizedSteel #HeavyEngineering #ConstructionSteel #IndustrialMaterials #MetalIndustry #PrecisionEngineering #MechanicalComponents #SteelGrades #AlloySteelRoundBar #SteelApplications #EngineeringMaterials #SteelProducts #SteelSupply #GlobalSteel #SteelBusiness#Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly

ISO 683-1 Carbon Steel Bars are high-quality heat-treatable non-alloy steels designed for general engineering and mechanical applications requiring reliable strength, toughness, and wear resistance. These steels are widely used for manufacturing machine parts that undergo machining, forming, and heat treatment processes. Manufactured in accordance with ISO 683-1, this specification defines the technical delivery conditions, chemical composition, and mechanical properties for non-alloy heat-treatable steels supplied in various product forms including bars, rods, plates, and sections. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of ISO 683-1 Carbon Steel Bars, supplied with mill test certificates and strict quality inspection as per international standards. Forms of Supply (as per specification): Hot rolled round bars, Black bars, Bright bars, Cold drawn bars, Peeled bars, Turned bars, Ground bars, Forged round bars Available Grades (as per ISO 683-1): C10, C15, C15E, C16E, C22, C25, C30, C35, C35E, C40, C45, C45E, C50, C55, C60, C67, C70, C75, C80 Explanation of Designation: • C – Carbon steel • Number – Approximate carbon content multiplied by 100 • E – Special quality steel with controlled phosphorus and sulphur Typical Chemical Composition (varies by grade): • Carbon (C): 0.10 – 0.80 depending on grade • Manganese (Mn): Improves strength and hardenability • Silicon (Si): Used as a deoxidizer • Phosphorus (P): Restricted to specified maximum limits • Sulphur (S): Controlled to maintain ductility and machinability Mechanical Properties (Typical – Grade Dependent): • Tensile Strength: Increases with carbon content • Yield Strength: Varies according to grade • Elongation: Controlled for ductility • Hardness: Depends on carbon content and heat treatment Key Features: • Wide range of heat-treatable carbon steels • Good machinability and formability • Suitable for quenching and tempering • Consistent chemical composition • Reliable mechanical performance Material Characteristics: ISO 683-1 carbon steel bars provide a versatile selection of low to high carbon steels suitable for various engineering applications. The controlled composition ensures predictable performance during machining and heat treatment, making these steels ideal for structural and mechanical components. Applications: • Shafts and axles • Gears and machine components • Bolts and fasteners • Automotive parts • Structural components • General engineering applications Conclusion: Ladhani Metal Corporation supplies premium quality ISO 683-1 Carbon Steel Bars in a wide range of grades, sizes, and finishes. With excellent mechanical properties, consistent quality, and versatility, ISO 683-1 steel bars are widely used in automotive, industrial, and engineering sectors. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation. #ISO6831 #ISO6831Steel #ISO6831CarbonSteel #CarbonSteelBars #SteelBars #EngineeringSteel #CarbonSteelRoundBar #CarbonSteelFlatBar #CarbonSteelSquareBar #CarbonSteelHexBar #C45Steel #C40Steel #C35Steel #C30Steel #C25Steel #C50Steel #C55Steel #C60Steel #ENCarbonSteel #HeatTreatableSteel #QuenchedAndTemperedSteel #AlloySteelSupplier #CarbonSteelSupplier #SteelBarSupplier #IndustrialSteel #MechanicalSteel #ForgingSteel #MachiningSteel #AutomotiveSteel #HighStrengthSteel #SteelStockist #SteelManufacturer #SteelExporter #SteelIndia #BrightBars #HotRolledBars #ColdDrawnBars #AnnealedSteel #NormalizedSteel #SteelProducts #MetalIndustry #HeavyEngineering #ConstructionSteel #IndustrialMaterials #SteelGrades #CarbonSteelRod #SteelRoundBar #SteelFlatBar #SteelHexBar #SteelSquareBar #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly

EN 10016-2 Non-Alloy Steel Rods are high-quality non-alloy steel wire rods designed for drawing and cold forming applications. These rods are produced through controlled hot rolling processes to ensure excellent surface quality, uniform microstructure, and reliable mechanical properties, making them suitable for the production of wires, fasteners, and other cold-formed components. Manufactured in accordance with EN 10016-2, this specification defines technical delivery conditions for non-alloy steel rods intended primarily for wire drawing and cold heading processes. The standard ensures consistent chemical composition, dimensional accuracy, and surface quality required for further processing. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10016-2 Non-Alloy Steel Rods, supplied with mill test certificates and strict quality inspection in compliance with European standards. Forms of Supply (as per specification): Hot rolled wire rods, Coiled rods, Drawn rods, Pickled rods, Shot blasted rods Available Grades (as per EN 10016-2): C4D, C7D, C9D, C10D, C12D, C15D, C18D, C20D Explanation of Designation: • C – Carbon steel • Number – Approximate carbon content multiplied by 100 • D – Steel suitable for drawing applications Typical Chemical Composition (varies by grade): • Carbon (C): 0.04 – 0.22 depending on grade • Manganese (Mn): Controlled to improve strength and drawing performance • Silicon (Si): Present in small amounts for deoxidation • Phosphorus (P): Limited to specified maximum levels • Sulphur (S): Controlled to maintain formability and surface quality Mechanical Properties (Typical – Grade Dependent): • Good ductility for cold forming • Moderate tensile strength • Excellent drawability • Uniform microstructure for consistent processing Key Features: • Excellent surface quality for wire drawing • Good cold forming properties • Consistent chemical composition • Reliable mechanical performance • Suitable for high-speed wire drawing processes Material Characteristics: EN 10016-2 non-alloy steel rods are specifically designed for wire drawing and cold heading operations. The controlled composition and hot rolling process provide a clean surface, uniform structure, and excellent ductility, ensuring efficient processing into wires and cold-formed components. Applications: • Wire drawing • Fasteners and bolts manufacturing • Nails and screws production • Springs and wire products • Cold heading components • Industrial wire applications Conclusion: Ladhani Metal Corporation supplies premium quality EN 10016-2 Non-Alloy Steel Rods in various grades and coil sizes. With excellent drawability, consistent quality, and reliable performance, EN 10016-2 steel rods are widely used in wire manufacturing, fasteners, and cold forming industries. For stock availability, customized specifications, or technical details, contact Ladhani Metal Corporation. #EN10016 #EN100162 #EN100162Rod #EN100162SteelRod #EN100162SteelBars #EN100162CarbonSteel #EN100162WireRod #EN100162ColdHeadingSteel #EN100162IndustrialSteel #EN100162EngineeringSteel #CarbonSteelRod #CarbonSteelBars #SteelRodSupplier #SteelBarSupplier #IndustrialSteelBars #HotRolledSteelRod #ColdHeadingSteelRod #WireRodSteel #FastenerSteelRod #AutomotiveSteelRod #EngineeringSteelBars #SteelRodManufacturer #SteelRodExporter #SteelRodStockist #SteelRodIndia #CarbonSteelRodSupplier #CarbonSteelBarStockist #AlloySteelRodSupplier #IndustrialSteelSupplier #MechanicalSteelBars #PrecisionSteelRod #ForgingSteelRod #MachineGradeSteelRod #ColdFormingSteelRod #SteelRodStock #SteelRodSupply #SteelBarExporter #RoundSteelRod #RoundSteelBar #StructuralSteelRod #SteelProductsIndia #EngineeringMaterials #SteelIndustry #SteelManufacturing #SteelDistribution #SteelRodTrading #BulkSteelSupply #IndustrialRawMaterials #SteelSolutions #MetalSupply #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly