EN 10083-2 C22R Steel Bars

EN 10083-2 C22R is a low carbon non-alloy steel grade intended for applications requiring good machinability, moderate strength, and reliable performance in the as-rolled (R) condition. With a nominal carbon content of around 0.22%, C22R steel offers good ductility and toughness, making it suitable for components subjected to light to moderate mechanical loads. Supplied in bar form, EN 10083-2 C22R steel is commonly used in general engineering and mechanical manufacturing. This grade is manufactured in accordance with EN 10083-2, which specifies technical delivery conditions for quenched and tempered steels. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10083-2 C22R steel bars. Our materials are sourced from approved mills and supplied with controlled chemical composition, consistent mechanical properties, and precise dimensional accuracy as per EN 10083-2 requirements. Forms of Supply (as per grade): Black round bar, bright round bar, peeled bar, hex bar, square bar, flat bar, forged bar Explanation of Designation (C22R): • C – Carbon steel • 22 – Approx. 0.22% carbon content • R – Supplied in as-rolled condition Chemical Composition (% – typical limits): • Carbon (C): 0.17 – 0.24 • Manganese (Mn): 0.40 – 0.70 • Silicon (Si): ≤ 0.40 • Phosphorus (P): ≤ 0.035 • Sulphur (S): ≤ 0.035 Mechanical Properties (Typical, as-rolled): • Tensile Strength: 410 – 550 MPa • Yield Strength: ≥ 260 MPa • Elongation: ≥ 20% • Hardness: 120 – 170 HB Key Features: • Low carbon steel with good ductility and toughness • Supplied in as-rolled condition for cost efficiency • Good machinability and formability • Suitable for welding and cold forming • Economical material for general engineering components Material Characteristics: EN 10083-2 C22R steel bar offers a good balance of strength, toughness, and workability in the as-rolled condition. Its low carbon content ensures ease of machining and forming, while providing adequate mechanical strength for lightly to moderately loaded components. Applications: • Shafts and pins • Bolts, studs, and fasteners • Bushes and sleeves • Forged and machined components • General engineering and structural parts Conclusion: Ladhani Metal Corporation supplies high-quality EN 10083-2 C22R steel bars in various industrial bar forms with consistent quality and dependable performance. With good machinability, weldability, and cost efficiency, C22R steel bars are a practical choice for general engineering and mechanical applications. For size availability, technical specifications, or customized requirements, contact Ladhani Metal Corporation. #EN10083 #EN100832 #EN100832Steel #EN10083CarbonSteel #EN10083EngineeringSteel #ENStandardSteel #CarbonSteel #MediumCarbonSteel #C22E #C25E #C30E #C35E #C40E #C45E #C50E #C55E #EngineeringSteelBars #CarbonSteelBars #CarbonSteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #CarbonSteelSupplier #EN100832Supplier #EN100832Manufacturer #EN100832Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar

EN 10083-2 C22E is a low carbon non-alloy steel grade designed for applications requiring good toughness, moderate strength, and excellent machinability. With a nominal carbon content of around 0.22% and controlled sulphur and phosphorus levels (E quality), C22E steel offers improved ductility and reliability compared to higher carbon grades. Supplied in bar form, EN 10083-2 C22E steel is widely used for general engineering and mechanical manufacturing applications. This grade is manufactured in accordance with EN 10083-2, which specifies technical delivery conditions for quenched and tempered steels. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10083-2 C22E steel bars. Our materials are sourced from approved mills and supplied with controlled chemical composition, consistent mechanical properties, and precise dimensional accuracy as per EN 10083-2 requirements. Forms of Supply (as per grade): Black round bar, bright round bar, peeled bar, hex bar, square bar, flat bar, forged bar Explanation of Designation (C22E): • C – Carbon steel • 22 – Approx. 0.22% carbon content • E – Special quality steel with controlled phosphorus and sulphur content Chemical Composition (% – typical limits): • Carbon (C): 0.17 – 0.24 • Manganese (Mn): 0.40 – 0.70 • Silicon (Si): ≤ 0.40 • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.025 Mechanical Properties (Typical, normalized): • Tensile Strength: 430 – 560 MPa • Yield Strength: ≥ 275 MPa • Elongation: ≥ 20% • Hardness: 120 – 170 HB Key Features: • Low carbon steel with good toughness and ductility • Excellent machinability and formability • Suitable for surface hardening processes such as carburizing • Good weldability compared to medium and high carbon steels • Cost-effective material for general engineering applications Material Characteristics: EN 10083-2 C22E steel bar provides a balanced combination of strength, toughness, and machinability. Its low carbon content makes it easy to machine and form, while the controlled impurity levels ensure consistent performance and improved reliability in mechanically loaded components. Applications: • Shafts and pins • Bolts, studs, and fasteners • Bushes and sleeves • Forged and machined components • General engineering and structural parts Conclusion: Ladhani Metal Corporation supplies high-quality EN 10083-2 C22E steel bars in various industrial bar forms with consistent quality and reliable performance. With good machinability, toughness, and versatility, C22E steel bars are a dependable choice for general engineering and mechanical applications. For size availability, technical specifications, or customized requirements, contact Ladhani Metal Corporation. #EN10083 #EN100832 #EN100832Steel #EN10083CarbonSteel #EN10083EngineeringSteel #ENStandardSteel #CarbonSteel #MediumCarbonSteel #C22E #C25E #C30E #C35E #C40E #C45E #C50E #C55E #EngineeringSteelBars #CarbonSteelBars #CarbonSteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #CarbonSteelSupplier #EN100832Supplier #EN100832Manufacturer #EN100832Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar

EN 10083-2 C60 is a high carbon non-alloy steel grade intended for applications that require very high strength, hardness, and excellent wear resistance after heat treatment. With a nominal carbon content of around 0.60%, C60 steel offers superior mechanical performance compared to lower carbon grades and is suitable for components exposed to heavy loads and severe operating conditions. Supplied in bar form, EN 10083-2 C60 steel is widely used in demanding mechanical, automotive, and industrial applications. This grade is manufactured in accordance with EN 10083-2, which specifies technical delivery conditions for quenched and tempered steels. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10083-2 C60 steel bars. Our materials are sourced from approved mills and supplied with controlled chemical composition, consistent mechanical properties, and precise dimensional accuracy as per EN 10083-2 requirements. Forms of Supply (as per grade): Black round bar, bright round bar, peeled bar, hex bar, square bar, flat bar, forged bar Explanation of Designation (C60): • C – Carbon steel • 60 – Approx. 0.60% carbon content Chemical Composition (% – typical limits): • Carbon (C): 0.57 – 0.65 • Manganese (Mn): 0.60 – 0.90 • Silicon (Si): ≤ 0.40 • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.035 Mechanical Properties (Typical, normalized / quenched & tempered): • Tensile Strength: 750 – 900 MPa • Yield Strength: ≥ 400 MPa • Elongation: ≥ 9% • Hardness: 220 – 270 HB (can be significantly increased by heat treatment) Key Features: • High carbon steel with very high strength and hardness • Excellent response to quenching and tempering • Outstanding wear resistance for heavy-duty applications • Suitable for induction hardening and surface hardening • Cost-effective alternative to alloy steels in high-wear components Material Characteristics: EN 10083-2 C60 steel bar provides very high hardness, strength, and wear resistance due to its higher carbon content. It can be effectively heat treated to achieve high surface and core hardness, making it ideal for highly stressed and wear-prone components where durability and long service life are critical. Applications: • Shafts, axles, and crankshafts • Gears, cams, and rollers • Pins, keys, and couplings • Forged and machined components • Heavy-duty mechanical and industrial parts Conclusion: Ladhani Metal Corporation supplies high-quality EN 10083-2 C60 steel bars in a wide range of industrial bar forms with consistent quality and reliable performance. With very high strength, excellent wear resistance, and superior heat-treatability, C60 steel bars are a dependable choice for demanding engineering and mechanical applications. For size availability, technical specifications, or customized requirements, contact Ladhani Metal Corporation. #EN10083 #EN100832 #EN100832Steel #EN10083CarbonSteel #EN10083EngineeringSteel #ENStandardSteel #CarbonSteel #MediumCarbonSteel #C22E #C25E #C30E #C35E #C40E #C45E #C50E #C55E #EngineeringSteelBars #CarbonSteelBars #CarbonSteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #CarbonSteelSupplier #EN100832Supplier #EN100832Manufacturer #EN100832Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar