'precision stainless steel supplier'

Ladhani Metal Corporation offers Stainless Steel Half Round Tube Shields designed to protect boiler tubes from erosion, corrosion, oxidation, and mechanical wear in power plants, refinery heaters, waste heat recovery boilers (WHRBs), and heat recovery steam generators (HRSGs). These shields are semi-cylindrical tube covers fitted over vulnerable sections of boiler tubes to prevent premature thinning caused by high-velocity flue gases, abrasive ash particles, and soot blower impact. By acting as a sacrificial protective layer, Stainless Steel Half Round Tube Shields significantly extend tube service life and improve boiler reliability. Function of Tube Shields • Protect boiler tubes from erosion, corrosion, and scaling • Reduce tube wear in high-temperature and high-flow zones • Minimize shutdowns and maintenance costs • Extend overall efficiency and durability of the boiler system Ladhani Metal Corporation manufactures, supplies, and exports Stainless Steel Half Round Tube Shields in a wide range of standard and custom specifications to meet domestic and international project requirements. Available Grades • SS 304 / SS 304L • SS 310 / SS 310S • SS 316 / SS 316L • SS 410 / SS 420 / SS 430 • 1Cr13 • 1Cr18Ni9Ti • 1Cr20Ni14Si2 • 1Cr25Ni20Si2 • Cr23Ni13 • Cr25Ni20 Applications: Extensively used in thermal power plants, waste heat recovery units, refinery heaters, petrochemical furnaces, HRSGs, and industrial boilers operating in erosive and corrosive environments. Uses • Protects boiler tubes against flue gas erosion and oxidation • Shields reheater and superheater tubes in high-temperature zones • Guards economizer and LTSH sections from ash erosion • Extends operational life in refinery and process heaters Features • Excellent corrosion and oxidation resistance at elevated temperatures • High mechanical strength and durability under cyclic heating • Precision-engineered for accurate fit over tube diameter • Easy installation, removal, and replacement during maintenance Applications • Power generation boilers – Tube protection in superheaters and reheaters • HRSGs – Reliable under frequent thermal cycling • Waste heat recovery boilers – Protection against abrasive and corrosive flue gases • Refinery and petrochemical heaters – Enhanced durability in aggressive atmospheres Conclusion Stainless Steel Half Round Tube Shields for Boilers from Ladhani Metal Corporation are engineered to provide superior protection against erosion, corrosion, and oxidation in demanding boiler environments. Manufactured in stainless steels and heat-resistant alloys, these shields ensure long service life, reduced downtime, and export-ready quality for global energy and industrial applications. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #HalfRoundReheaterShield #ReheaterTubeShield #BoilerReheaterProtection #PowerPlantTubeShield #BoilerErosionShield #SteamBoilerTubeShield #HighTempTubeShield #BoilerWearProtection

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status:

DIN 2634 stainless steel flanges PN 25 are precision-engineered weld neck flanges designed and manufactured in accordance with the DIN 2634 standard. These flanges are suitable for high-pressure pipeline systems operating up to 25 bar (362 psi), providing robust and secure connections for a variety of critical industrial applications. Constructed from high-quality stainless steel grades such as 304, 316, and 321, these flanges offer excellent mechanical properties, enhanced corrosion resistance, and dependable performance in aggressive service conditions. Ladhani Metal Corporation is a globally recognized manufacturer and supplier of stainless steel flanges, known for delivering high-precision products that meet stringent international quality and dimensional standards. Each flange undergoes rigorous testing and quality checks to ensure optimal performance, safety, and longevity under high-pressure conditions. Pressure Rating: • PN 25 (25 bar / 362 psi): Engineered for high-pressure environments requiring reinforced flange connections with reliable resistance to corrosion and mechanical stress. Flange Type: • Weld Neck Flanges Incorporating a long tapered hub, weld neck flanges help maintain pipe alignment, reduce stress concentration at the weld joint, and enable smooth fluid flow with minimal turbulence. • Flat Face (FF) Flanges Ideal for systems utilizing soft gaskets or cast components, flat face flanges promote consistent gasket compression and sealing integrity. Stainless Steel Grades and Typical Composition: Stainless Steel 304 • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 10.5% • Carbon (C): ≤ 0.08% (304), ≤ 0.03% (304L) • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Suitable for general-purpose piping systems in environments with moderate corrosion exposure, including potable water and light-duty process lines. Stainless Steel 316 • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% • Carbon (C): ≤ 0.08% (316), ≤ 0.03% (316L) • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Ideal for systems exposed to chlorides, cleaning agents, or other corrosive substances such as in chemical processing, pharmaceuticals, and marine environments. Stainless Steel 321 • Chromium (Cr): 17.0 – 19.0% • Nickel (Ni): 9.0 – 12.0% • Titanium (Ti): ≥ 5 × C (typically 0.20 – 0.70%) • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Frequently used in high-temperature services such as thermal processing equipment, exhaust systems, and heat exchangers due to its stability against intergranular corrosion. Applications of DIN 2634 Stainless Steel Flanges PN 25: • Chemical Processing Units Handles higher operating pressures in systems transporting acids, alkalis, and solvents. • Marine and Offshore Installations Resistant to pressure fluctuations and saltwater corrosion in offshore piping networks. • Pharmaceutical and Biotech Plants Used in clean process environments where both pressure integrity and corrosion resistance are critical. • Industrial Steam and Thermal Systems Suitable for steam distribution and thermal expansion pipelines operating under high pressure. • Power Generation Facilities Applied in turbine piping, heat recovery systems, and pressurized cooling water circuits. Key Features: • Manufactured to DIN 2634 dimensional and pressure specifications • PN 25 pressure rating supports high-pressure operation • Weld neck design ensures leak-tight, stress-resistant connections • Available in stainless steel grades 304, 316, 321 and their low-carbon variants • Superior resistance to high-temperature corrosion and chemical attack • Long-term mechanical strength and fatigue resistance • Custom sizes, finishes, and pressure ratings available upon request Conclusion: DIN 2634 stainless steel flanges PN 25 from Ladhani Metal Corporation are engineered for high-performance use in high-pressure industrial environments where safety, corrosion resistance, and durability are paramount. These flanges are ideal for chemical, marine, thermal, and high-purity applications requiring strong, leak-resistant, and corrosion-resistant connections. For technical support, customized solutions, or pricing details, contact Ladhani Metal Corporation today.

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status:

DIN 2633 stainless steel flanges PN 16 are precision-engineered weld neck flanges manufactured in accordance with the DIN 2633 standard. These flanges are designed for higher medium-pressure applications up to 16 bar (232 psi), offering durable and secure connections in a wide range of industrial pipeline systems. Made from high-quality stainless steel grades such as 304, 316, and 321, they offer superior corrosion resistance, mechanical strength, and long-term performance under more demanding operating and environmental conditions. Ladhani Metal Corporation is a leading global manufacturer and supplier of stainless steel flanges, known for consistent product quality, technical precision, and adherence to international standards. Each flange undergoes rigorous inspection to ensure compliance with industry norms and safety guidelines. Pressure Rating: • PN 16 (16 bar / 232 psi): Suitable for medium to high-pressure pipeline systems requiring enhanced joint strength and corrosion protection. Flange Type: • Weld Neck Flanges Designed with a long tapered hub that facilitates proper pipe alignment and reduces stress concentration at the flange base. This ensures smooth flow transitions and minimizes turbulence. • Flat Face (FF) Flanges Flat face configuration promotes uniform gasket compression, making it ideal for systems using soft gasket materials or mating with cast components. Stainless Steel Grades and Full Composition: Stainless Steel 304 • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 10.5% • Carbon (C): ≤ 0.08% (304), ≤ 0.03% (304L) • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Suitable for general-purpose piping systems including potable water, food-grade processing lines, and moderate chemical environments. Stainless Steel 316 • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% • Carbon (C): ≤ 0.08% (316), ≤ 0.03% (316L) • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Suitable for more aggressive environments including chemical processing, marine systems, and equipment exposed to chlorinated solutions or cleaning agents. Stainless Steel 321 • Chromium (Cr): 17.0 – 19.0% • Nickel (Ni): 9.0 – 12.0% • Titanium (Ti): ≥ 5 × C (typically 0.20 – 0.70%) • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Preferred in applications involving elevated temperatures and moderate corrosion exposure, such as exhaust systems, heat exchangers, and food-grade thermal equipment. Applications of DIN 2633 Stainless Steel Flanges PN 16: • Industrial Water Systems Used in pressurized water delivery and treatment systems requiring increased pressure tolerance. • Chemical and Petrochemical Plants Suitable for pipelines transporting reactive or mildly corrosive chemicals. • Marine and Offshore Applications Resistant to saltwater corrosion and pressure variations in marine environments. • Food and Beverage Processing Employed in sanitary and hygienic systems requiring strong, corrosion-resistant joints. • HVAC Systems Used in high-pressure duct and pipe connections for heating, ventilation, and cooling systems. Key Features: • Manufactured in compliance with DIN 2633 standards • PN 16 pressure rating for enhanced medium-pressure service • Weld neck design supports secure, vibration-resistant connections • Offered in stainless steel grades 304, 304L, 316, 316L, and 321 • High resistance to chemical and environmental corrosion • Long-lasting performance under mechanical stress and thermal cycles • Custom dimensions, materials, and finishes available upon request Conclusion: DIN 2633 Stainless Steel Flanges PN 16 from Ladhani Metal Corporation are built for reliability in demanding industrial settings that require higher pressure tolerance and superior corrosion resistance. These weld neck flanges, made from premium stainless steel, are ideal for applications across water treatment, chemical processing, marine installations, and food-grade systems. For custom configurations, technical consultations, or detailed pricing, contact Ladhani Metal Corporation today.

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status:

DIN 2630 carbon steel flanges PN 2.5 are precision-engineered weld neck flanges designed in accordance with the DIN 2630 standard, suitable for low-pressure applications up to 2.5 bar (36.25 psi). Manufactured from high-quality carbon steel grades such as ASTM A105 and A350 LF2, these flanges offer reliable mechanical strength and excellent weldability. Carbon steel flanges are ideal for general-purpose piping systems where toughness, cost-effectiveness, and structural integrity are required in low-pressure environments. Ladhani Metal Corporation is a trusted global manufacturer and supplier of carbon steel flanges, known for delivering quality components built to meet international standards. Our DIN 2630 PN 2.5 carbon steel weld neck flanges are widely used in industries such as oil and gas, water treatment, power generation, and general manufacturing. Every flange is manufactured under stringent quality control to ensure performance, durability, and compliance with customer requirements. Pressure Rating: • PN 2.5 (2.5 bar / 36.25 psi): Designed for low-pressure systems requiring durable, cost-effective materials with high mechanical strength. Flange Type: • Weld Neck Flanges Equipped with a long tapered hub to ensure smooth fluid flow and reduce stress concentration, these flanges are suited for critical applications involving pressure and temperature changes. • Flat Face (FF) Flanges Flat face flanges provide uniform gasket compression, especially when used with cast components or soft gasket materials in low-pressure setups. Carbon Steel Grades and Chemical Composition: ASTM A105 (Forged Carbon Steel) • Carbon (C): ≤ 0.35% • Manganese (Mn): 0.60 – 1.05% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.040% • Silicon (Si): 0.10 – 0.35% Applications: Commonly used in ambient- and high-temperature service in pressure systems. Ideal for general-purpose industrial piping, valve connections, and flanged joints. ASTM A350 LF2 (Low-Temperature Carbon Steel) • Carbon (C): ≤ 0.30% • Manganese (Mn): 0.60 – 1.35% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.040% • Silicon (Si): 0.15 – 0.30% Applications: Designed for low-temperature services where enhanced notch toughness is essential, such as cryogenic and refrigerated systems. Applications of DIN 2630 Carbon Steel Flanges PN 2.5: • Oil and Gas Industry Used in upstream and downstream piping for fluid transport under low-pressure conditions. • Water Treatment Plants Ideal for piping systems handling potable water, wastewater, and industrial effluents. • Power Generation Applied in cooling systems, boilers, and auxiliary piping in thermal and hydroelectric power plants. • General Industrial Use Suitable for manufacturing facilities, mechanical piping, and structural connections. Key Features: • Manufactured as per DIN 2630 standards • PN 2.5 pressure class for low-pressure piping systems • Weld neck design improves mechanical stability and flow characteristics • Flat face option enables consistent sealing with softer gasket materials • High strength, excellent machinability, and cost-efficiency • Available in standard and customized sizes, face types, and surface finishes Conclusion: DIN 2630 Carbon Steel Flanges PN 2.5 from Ladhani Metal Corporation provide a practical and durable solution for low-pressure piping systems across various industries. With strong mechanical properties, reliable performance, and economical pricing, these flanges are ideal for applications requiring consistent quality and weldability. For technical support, custom solutions, or pricing, contact Ladhani Metal Corporation.

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status:

DIN 2630 stainless steel flanges PN 2.5 are precision-fabricated weld neck flanges produced in accordance with the DIN 2630 standard. These flanges are engineered for low-pressure applications up to 2.5 bar (36.25 psi), providing reliable and leak-resistant connections in light-duty and non-critical piping systems. Manufactured from premium stainless steel grades including 304, 316, and 321, they offer excellent corrosion resistance, mechanical stability, and longevity even in mildly corrosive or intermittent industrial environments. Ladhani Metal Corporation is a globally trusted manufacturer and supplier of stainless steel flanges, known for delivering consistent quality and engineering precision. Ladhani Metal Corporation ensures each flange meets relevant industrial standards and environmental requirements. Pressure Rating: • PN 2.5 (2.5 bar / 36.25 psi): Suitable for low-pressure pipeline systems that require basic joint integrity and corrosion resistance. Flange Type: • Weld Neck Flanges Designed with a long tapered hub to support pipe alignment and reduce stress at the base of the flange. Ensures steady flow transition with minimal turbulence. • Flat Face (FF) Flanges Flat face design ensures even gasket compression and is preferred in systems using cast components or soft gasket materials. Stainless Steel Grades and Full Composition: Stainless Steel 304 • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 10.5% • Carbon (C): ≤ 0.08% (304), ≤ 0.03% (304L) • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Ideal for general-purpose low-pressure systems including potable water lines, food-grade applications, and non-aggressive chemical piping. Stainless Steel 316 • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% • Carbon (C): ≤ 0.08% (316), ≤ 0.03% (316L) • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Offers higher corrosion resistance for systems handling chlorinated water, cleaning agents, or mildly acidic substances. Common in pharmaceutical and marine-grade piping. Stainless Steel 321 • Chromium (Cr): 17.0 – 19.0% • Nickel (Ni): 9.0 – 12.0% • Titanium (Ti): ≥ 5 × C (typically 0.20 – 0.70%) • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Best suited for moderate temperature and corrosion conditions. Often used in low-pressure exhaust lines, thermal processing, and food-grade heat equipment. Applications of DIN 2630 Stainless Steel Flanges PN 2.5: • Water Supply and Treatment Used in potable and greywater systems requiring low-pressure fluid conveyance. • Food and Beverage Industry Ideal for hygienic piping with low flow rates and non-corrosive media. • Chemical Distribution Used in systems handling diluted or non-aggressive chemicals. • HVAC and Ventilation Suited for duct flanges and connections in air-handling systems. Key Features: • Compliant with DIN 2630 standards • PN 2.5 pressure class for low-pressure service • Weld neck design for improved pipe-flange connection • Available in stainless steel grades 304, 316, and 321 • Flat face configuration for even gasket contact • Corrosion-resistant and long-lasting under mild mechanical loads • Suitable for food-grade, chemical, and HVAC systems • Custom sizes, finishes, and material grades available upon request Conclusion: DIN 2630 Stainless Steel Flanges PN 2.5 from Ladhani Metal Corporation are optimized for low-pressure industrial applications where corrosion resistance, hygiene, and operational simplicity are key. Made from high-grade stainless steel materials, these weld neck flanges offer a reliable, economical solution for various sectors including water distribution, food processing, and light chemical service. For custom dimensions, technical consultation, or pricing details, contact Ladhani Metal Corporation today.

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status:

DIN 2627 Carbon Steel flanges PN 400 are high-strength blind flanges designed for use in high-pressure applications across a wide range of industrial systems. Manufactured in accordance with the DIN 2627 standard, these flanges are primarily used to isolate piping systems by sealing off the end of a pipeline or vessel opening. The PN 400 pressure rating (400 bar / 5800 psi) ensures reliable performance under intense pressure and mechanical stress. Carbon steel flanges offer excellent tensile strength, impact resistance, and structural integrity, making them a cost-effective solution for systems where corrosion resistance is not the primary concern. Typically used in applications involving water, steam, oil, and gas, DIN 2627 carbon steel blind flanges are well-suited for power plants, refineries, petrochemical facilities, and general industrial systems. Ladhani Metal Corporation is a trusted global manufacturer and exporter of carbon steel flanges, producing components that meet rigorous international standards for material quality, dimensional accuracy, and pressure containment. Pressure Rating: • PN 400 (400 bar / 5800 psi): Suitable for extremely high-pressure systems in industrial pipelines and mechanical installations. Flange Type: • Blind Flanges Solid, non-bored flanges used to terminate flow or provide system isolation. Commonly used for pressure testing, maintenance access, and future expansion. • Flat Face (FF) Flanges Flat sealing surfaces designed for use with full-face gaskets and flat-faced mating flanges. Promotes even bolt loading and effective sealing under high-pressure conditions. Carbon Steel Grades and Composition: ASTM A105 (Forged Carbon Steel) • Carbon (C): ≤ 0.35% • Manganese (Mn): 0.60 – 1.05% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.040% • Silicon (Si): 0.10 – 0.35% Applications: Commonly used for high-temperature and high-pressure systems. Ideal for oil and gas, steam, and hydraulic systems. ASTM A350 LF2 (Low-Temperature Carbon Steel) • Carbon (C): ≤ 0.30% • Manganese (Mn): 0.60 – 1.35% • Silicon (Si): 0.15 – 0.30% • Nickel (Ni): ≤ 1.0% Applications: Suitable for sub-zero temperature services such as cryogenic systems, LNG processing, and cold-weather pipelines. Applications of DIN 2627 Carbon Steel Flanges PN 400: • Oil and Gas Transmission Lines Used in pipeline systems and refineries handling hydrocarbons under high pressure. • Steam and Power Generation Plants Ideal for high-pressure steam lines, condensate systems, and boiler feedwater applications. • Petrochemical and Chemical Industries Suitable for handling neutral and non-aggressive chemical fluids and process gases. • Water Treatment and Pumping Stations Used in high-pressure water systems, including pumping stations, pressure regulators, and testing units. • Heating, Ventilation, and Air Conditioning (HVAC) Employed in high-pressure chilled water and steam systems for industrial facilities. • General Manufacturing and Engineering Systems Reliable for structural piping systems in factories and mechanical installations. Key Features: • Compliant with DIN 2627 specifications • PN 400 pressure rating for ultra-high-pressure systems • Blind flange design allows for system isolation and pressure containment • Flat face design compatible with full-face gaskets and flat mating surfaces • Manufactured from forged carbon steels like ASTM A105 and A350 LF2 • Excellent strength, ductility, and impact resistance • Economical and durable for non-corrosive environments • Widely used across oil and gas, power, chemical, and water treatment sectors • Custom sizes, pressure classes, surface coatings, and face types available upon request Conclusion: DIN 2627 Carbon Steel Flanges PN 400 from Ladhani Metal Corporation are engineered for high-performance applications requiring strength, pressure retention, and reliability in demanding industrial environments. Whether used in power plants, oil pipelines, or steam systems, these flanges provide durable and cost-effective sealing for critical operations. Contact Ladhani Metal Corporation for product specifications, technical support, or custom solutions tailored to your piping system requirements.

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status:

Ladhani Metal Corporation is a leading manufacturer and exporter of DIN 2561 super duplex flanges, designed for high-performance in challenging piping systems. Super duplex stainless steel combines the best characteristics of both austenitic and ferritic steels, offering superior strength, excellent resistance to corrosion, and high mechanical properties. These flanges are manufactured according to the DIN 2561 standard, with weld neck flanges and pressure ratings of PN6, PN10, PN16, PN25, and PN40 available based on customer needs. Our super duplex flanges are made from high-quality super duplex stainless steel, providing outstanding resistance to pitting, crevice corrosion, and stress corrosion cracking, even in the most aggressive environments. These flanges are widely used in industries such as petrochemical, oil and gas, marine, and chemical processing, where both high strength and corrosion resistance are crucial. Flange Types: • Weld neck flanges: Suitable for high-pressure, high-stress piping systems, providing excellent strength and reliability. • Raised face (RF): Enhances gasket sealing for leak-proof connections. • Flat face (FF): Ideal for mating with brittle or non-metallic surfaces. Grades, Chemical Composition, and Applications: Super Duplex Stainless Steel 2507 (UNS S32750) Chemical Composition: Chromium (Cr): 24.0 – 26.0% Nickel (Ni): 6.0 – 8.0% Molybdenum (Mo): 3.0 – 5.0% Iron (Fe): Balance Manganese (Mn): ≤ 2.0% Silicon (Si): ≤ 1.0% Carbon (C): ≤ 0.03% Nitrogen (N): 0.24 – 0.32% Phosphorus (P): ≤ 0.03% Sulfur (S): ≤ 0.02% Applications: Offshore oil and gas platforms, subsea equipment, chemical processing plants, desalination plants, and power generation industries, where high resistance to corrosion and high pressure is required. Super Duplex Stainless Steel 32760 (UNS S32760) Chemical Composition: Chromium (Cr): 25.0 – 27.0% Nickel (Ni): 6.0 – 8.0% Molybdenum (Mo): 4.0 – 5.0% Iron (Fe): Balance Manganese (Mn): ≤ 2.0% Silicon (Si): ≤ 1.0% Carbon (C): ≤ 0.03% Nitrogen (N): 0.30 – 0.40% Phosphorus (P): ≤ 0.03% Sulfur (S): ≤ 0.02% Applications: Offshore and subsea pipelines, petrochemical plants, seawater cooling systems, pulp and paper industries, and water treatment facilities, where superior corrosion resistance and durability are essential. Key Features: Manufactured according to DIN 2561 standards. High dimensional accuracy and excellent surface finish. Conclusion: DIN 2561 super duplex flanges from Ladhani Metal Corporation offer exceptional strength, corrosion resistance, and long-lasting durability for challenging applications. With grades such as Super Duplex Stainless Steel 2507 and 32760, these flanges are designed to meet international standards and are ideal for industries that demand high strength and resistance in corrosive environments. Our commitment to quality and precision makes our super duplex flanges a trusted choice for industries worldwide. For technical details, pricing, or bulk inquiries, contact Ladhani Metal Corporation.

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status:

The DIN 2558 Stainless Steel Flange PN 6 is a high-performance, precision-engineered component designed to meet the stringent demands of modern industrial piping systems. Manufactured in accordance with the DIN (Deutsches Institut für Normung) standard, this flange is available in a range of high-quality stainless steel grades that provide excellent resistance to corrosion, high temperatures, and mechanical stresses. Ladhani Metal Corporation is a trusted supplier of these flanges, delivering products that are known for their exceptional durability, reliability, and long-lasting performance. These flanges are used in a variety of industries, including chemical, petrochemical, food processing, pharmaceutical, and water treatment. Whether for general-purpose applications or more specialized uses in high-pressure or high-temperature environments, the DIN 2558 SS flange offers versatility and safety. The PN 6 pressure rating makes them ideal for medium-pressure systems, ensuring a reliable and leak-proof connection that will withstand the test of time. Ladhani Metal Corporation ensures that each flange is produced with precision, using advanced manufacturing processes and premium materials to meet the highest industry standards. Types: Weld Neck Flange – Ideal for high-pressure applications, it is welded directly to the pipe, providing a robust, leak-free connection. Slip-On Flange – Slides over the pipe and is welded both inside and outside for easier installation and cost-effectiveness. Blind Flange – Used to seal the end of a piping system, preventing the flow of fluids or gases. Threaded Flange – Features internal threads for easy connection to the pipe without requiring welding. Socket Weld Flange – Typically used for small-diameter high-pressure systems, providing a smooth bore for fluid flow. Grades & Chemical Composition: Grade 304: Carbon (C): ≤ 0.08% Chromium (Cr): 18.0 - 20.0% Nickel (Ni): 8.0 - 10.5% Manganese (Mn): 2.0% max Silicon (Si): 1.0% max Phosphorus (P): 0.045% max Sulfur (S): 0.03% max Offers excellent corrosion resistance and is widely used in food processing, chemical, and petrochemical industries. Grade 316: Carbon (C): ≤ 0.08% Chromium (Cr): 16.0 - 18.0% Nickel (Ni): 10.0 - 14.0% Molybdenum (Mo): 2.0 - 3.0% Manganese (Mn): 2.0% max Silicon (Si): 1.0% max Phosphorus (P): 0.045% max Sulfur (S): 0.03% max Known for its superior resistance to corrosion, especially in chloride-rich environments like seawater. Grade 321: Carbon (C): ≤ 0.08% Chromium (Cr): 17.0 - 19.0% Nickel (Ni): 9.0 - 12.0% Titanium (Ti): 5 times the carbon content, minimum 0.3% Manganese (Mn): 2.0% max Silicon (Si): 1.0% max Phosphorus (P): 0.045% max Sulfur (S): 0.03% max Offers enhanced high-temperature stability and resistance to sensitization, making it suitable for applications involving elevated temperatures, such as heat exchangers, and in chemical industries. PN 6 Rating: The PN 6 rating corresponds to a pressure class of 6 bar (approximately 87 psi), making it suitable for medium-pressure applications in a variety of industrial settings. Features: • Corrosion Resistance: Stainless steel provides excellent protection against rust, corrosion, and staining, ensuring reliability even in harsh environments. • High Strength: These flanges deliver superior tensile strength and durability under both high and low-pressure conditions. • Versatile Applications: Suitable for use in chemical, petrochemical, food, pharmaceutical, and water treatment industries. • Easy Installation: The flanges are designed for straightforward welding and installation, providing secure, leak-proof connections. • Long-Lasting Performance: Ladhani Metal Corporation's SS flanges are engineered to offer a long service life, minimizing the need for maintenance and replacements. Ladhani Metal Corporation ensures that each DIN 2558 SS flange is manufactured to meet the highest quality standards, offering both performance and cost-effectiveness for various industrial piping systems.

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status:

DIN 2634 monel flanges PN 25 are high-performance weld neck flanges manufactured in accordance with the DIN 2634 standard. Specifically engineered for high-pressure applications up to 25 bar (362 psi), these flanges are made from premium Monel alloys, offering excellent corrosion resistance, high strength, and durability in harsh environments. Their robust construction makes them ideal for applications involving aggressive chemical media and seawater where conventional metal flanges may degrade. Ladhani Metal Corporation is a trusted global manufacturer and supplier of Monel flanges, known for advanced manufacturing capabilities, precision machining, and strict adherence to international quality standards. Each flange undergoes thorough inspection and testing to ensure long-term reliability, safety, and resistance to extreme operating conditions. Pressure Rating: • PN 25 (25 bar / 362 psi): Designed for high-pressure systems requiring corrosion-resistant and mechanically robust flange connections. Flange Type: • Weld Neck Flanges Featuring an extended tapered hub, weld neck flanges provide excellent stress distribution at the base, ensuring strong and leak-proof joints in systems exposed to high pressure and thermal cycling. • Flat Face (FF) Flanges Ideal for use with softer gasket materials or in systems connecting to cast components, flat face flanges offer consistent and uniform gasket compression. Monel Grades and Typical Composition: Monel 400 (UNS N04400) – Nickel-Copper Alloy • Nickel (Ni): 63% minimum • Copper (Cu): 28-34% • Iron (Fe): 2.5% maximum • Manganese (Mn): 2.0% maximum • Carbon (C): 0.30% maximum Applications: Preferred in seawater and saltwater service, chemical processing, and marine equipment where excellent corrosion resistance in oxidizing and reducing environments is required. Monel K500 (UNS N05500) – Nickel-Copper Alloy with Additional Strengthening Elements • Nickel (Ni): 63% minimum • Copper (Cu): 28-34% • Iron (Fe): 2.5% maximum • Manganese (Mn): 2.0% maximum • Aluminum (Al) and Titanium (Ti): Added for age hardening Applications: Used in high-strength marine and chemical environments requiring enhanced mechanical properties and corrosion resistance. Applications of DIN 2634 Monel Flanges PN 25: • Offshore and Marine Systems Resists corrosion from seawater, brine, and marine atmospheres while maintaining strength under pressure. • Chemical and Petrochemical Processing Ideal for transporting corrosive media such as acids, alkalis, and chloride solutions at elevated pressures. • Desalination Plants Performs reliably in saltwater treatment and high-pressure water processing systems. • Power Generation Used in systems requiring resistance to erosion and corrosion in high-temperature steam and cooling circuits. • Pharmaceutical and Food Processing Applied in hygienic environments requiring corrosion resistance and chemical inertness. Key Features: • Manufactured in accordance with DIN 2634 dimensional and pressure requirements • PN 25 pressure rating supports high-pressure applications • Excellent resistance to corrosion, erosion, and stress corrosion cracking • Weld neck configuration ensures strong, vibration-resistant joints • Available in Monel 400 and Monel K500 alloys • Custom sizes, pressure classes, and surface finishes available upon request Conclusion: DIN 2634 monel flanges PN 25 from Ladhani Metal Corporation are engineered for demanding conditions where corrosion resistance, mechanical strength, and pressure integrity are essential. These Monel flanges provide long-term durability and reliable performance for advanced applications in marine, chemical, power generation, and industrial systems. For technical consultations, specialized requirements, or pricing information, contact Ladhani Metal Corporation today.

Price: 0 | Payment Type: | Available: False | COD Available: False | KYC Status: