Ladhani Metal Corporation offers SS 410 Half Round Tube Shields designed to safeguard boiler tubes in power plants, HRSGs, WHRBs, and industrial steam systems. Boiler tubes are exposed to continuous erosion, high-temperature flue gases, and abrasive ash particles that can shorten their service life. Manufactured from martensitic stainless steel grade SS 410, these shields provide high mechanical strength, moderate corrosion resistance, and reliable oxidation resistance, making them suitable for high-temperature boiler operations. Function of Boiler Tubes • Carry water or steam through heating sections of the boiler • Continuously exposed to erosion, oxidation, and abrasive flue gases • Require Half Round Tube Shields in high-velocity and soot blower impact zones Ladhani Metal Corporation manufactures, supplies, and exports SS 410 Half Round Tube Shields in various lengths, diameters, and thicknesses to meet both domestic and international requirements. SS 410 Grade Chemical Composition – Martensitic Stainless Steel • Carbon (C): 0.08 – 0.15% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 11.50 – 13.50% • Nickel (Ni): ≤ 0.75% • Iron (Fe): Balance Applications: Suitable for reheater and superheater sections in thermal power plants, waste heat recovery boilers, and industrial steam systems requiring high strength with moderate corrosion and oxidation resistance. Uses • Shields boiler tubes against erosion from high-velocity flue gases • Protects tubes from soot blower erosion and abrasive particles • Extends service life of steam circuit components in high-temperature boilers • Commonly used in utility boilers, WHRBs, HRSGs, and process boilers Features • High mechanical strength at elevated temperatures • Reliable oxidation resistance in hot boiler environments • Moderate corrosion resistance under steam and flue gas exposure • Cost-effective protection with precision-engineered fit Applications • Power generation boilers – Durable protection for reheater and superheater tubes • Waste heat recovery boilers – Guards tubes from high-velocity particle erosion • Industrial steam systems – Performs well in medium-to-high temperature conditions • Process boilers – Ensures extended operational life under erosive atmospheres Conclusion The SS 410 Half Round Tube Shield for Boiler Tubes by Ladhani Metal Corporation provides a strong, durable, and cost-effective solution for boiler tube protection in erosive and high-temperature environments. With high mechanical strength and reliable oxidation resistance, these shields extend tube life and minimize downtime. Available in a wide range of export-ready specifications, they are trusted by industries worldwide. For supply and technical inquiries, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #HalfRoundReheaterShield #ReheaterTubeShield #BoilerReheaterProtection #PowerPlantTubeShield #BoilerErosionShield #SteamBoilerTubeShield #HighTempTubeShield #BoilerWearProtection

Ladhani Metal Corporation offers SS 316L Half Round Tube Shields designed to protect boiler tubes in thermal power plants, HRSGs, WHRBs, and industrial steam systems. Boiler tubes face severe service conditions such as high-temperature flue gas erosion, oxidation, and soot blower impact, which significantly reduce operational life. Manufactured from low-carbon molybdenum-bearing austenitic stainless steel grade SS 316L, these shields provide excellent corrosion resistance, superior scaling resistance, and improved weldability by minimizing the risk of carbide precipitation during welding. Function of Boiler Tubes • Carry water or steam through heating sections of the boiler • Continuously exposed to high-temperature flue gases, ash, and corrosive particles • Require Half Round Tube Shields in high-erosion, corrosive, and soot blower zones Ladhani Metal Corporation manufactures, supplies, and exports SS 316L Half Round Tube Shields in various lengths, diameters, and thicknesses to cater to both domestic and international requirements. SS 316L Grade Chemical Composition – Austenitic Stainless Steel • Carbon (C): ≤ 0.03% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.00 – 18.00% • Nickel (Ni): 10.00 – 14.00% • Molybdenum (Mo): 2.00 – 3.00% • Iron (Fe): Balance Applications: Suitable for superheater and reheater tubes in power generation boilers, petrochemical heaters, HRSGs, and waste heat recovery boilers operating in corrosive and high-temperature conditions. Uses • Protects boiler tubes from erosion, oxidation, and flue gas corrosion • Shields tubes against soot blower impact and abrasive ash particles • Extends service life of superheater and reheater components in steam circuits • Applicable in WHRBs, HRSGs, utility boilers, and process steam plants Features • Superior corrosion resistance in oxidizing and chloride-rich atmospheres • Low carbon content reduces sensitization and enhances weldability • Excellent resistance to pitting and crevice corrosion due to molybdenum content • Precision-engineered for exact tube curvature and easy installation Applications • Power generation boilers – Long-lasting protection for reheater and superheater tubes • Waste heat recovery boilers – Reliable against particle erosion and scaling • Industrial steam plants – Performs well under fluctuating high-temperature cycles • Petrochemical and chemical heaters – Ensures durability in corrosive environments Conclusion The SS 316L Half Round Tube Shield for Boiler Tubes by Ladhani Metal Corporation provides long-term, corrosion-resistant protection under demanding boiler conditions. With enhanced weldability, excellent pitting resistance, and reliable high-temperature stability, these shields extend tube service life and reduce maintenance needs. Available in a wide range of export-ready specifications, they are trusted solutions for global power, petrochemical, and industrial sectors. For supply and technical inquiries, contact Ladhani Metal Corporation.

Quality Standard Material No. Old designation DC01 DIN EN 10130 1.0330 ST 12-03 Cold-rolled flat steel DC01, according to the standards DIN EN 10130 and DIN EN 10152 Cold-rolled flat steel DC01 is a widely used material in the industrial sector, which is used for various applications in the cold forming process due to its excellent properties. The standards DIN EN 10130 and DIN EN 10152 are decisive for ensuring the quality and requirements of this material. DC01 according to the DIN EN 10130 standard The DIN EN 10130 standard defines the requirements for cold-rolled flat products made of unalloyed quality steels that are used in the cold forming process. Technical delivery conditions DIN EN 10130 specifies the technical delivery conditions for cold-rolled flat steel. These include the chemical composition, mechanical properties and surface quality. The standard ensures that the products supplied meet the required standards in order to guarantee workability and final quality. Chemical composition The chemical composition of the steel is decisive for its properties and is described in detail in DIN EN 10130. For DC01, the maximum carbon content is 0.12%, while the manganese and phosphorus content is also subject to specific limits. This composition ensures good cold formability and a high surface quality. Mechanical properties DC01 in accordance with DIN EN 10130 has specific mechanical properties that make it ideal for cold forming. These include a minimum tensile strength of 270-410 MPa and a minimum elongation of 28%. These properties allow the steel to be processed into complex shapes without cracking or breaking. Surface quality The surface quality is another aspect of DIN EN 10130. DC01 can be supplied in different surface finishes, such as smooth or matt. These variations allow adaptation to specific requirements of the end application, be it for decorative purposes or further coating processes. DC01+ZE according to the DIN EN 10152 standard The DIN EN 10152 standard extends the requirements of DIN EN 10130 to include specific conditions for electrolytically galvanized products. This standard is crucial for applications in which corrosion protection plays an important role. Technical delivery conditions DIN EN 10152 specifies the technical delivery conditions for electrolytically galvanized, cold-rolled flat products. In addition to the chemical composition and mechanical properties, these conditions also include the specific requirements for the zinc coating. Chemical composition and zinc coating The chemical composition of the base material DC01 generally remains unchanged, but an additional electrolytic zinc coating is applied. This coating is used for corrosion protection and varies in thickness depending on the specific requirements of the application. The standard provides detailed specifications for the thickness and uniformity of the zinc coating to ensure optimum protection. Mechanical properties Even with galvanized products, the mechanical properties of the base material are largely retained. The standard ensures that the cold formability and strength of the steel are not impaired despite the additional coating. Corrosion resistance and surface quality One of the main advantages of products manufactured in accordance with DIN EN 10152 is their improved corrosion resistance. Electrolytic galvanizing protects the steel from rust and thus increases the service life of the end product. The surface quality also plays a decisive role here and can be supplied in various finishes, such as smooth or textured. Conclusion Cold-rolled flat steel DC01, produced in accordance with the DIN EN 10130 and DIN EN 10152 standards, offers a number of advantages for applications in the cold forming process. While DIN EN 10130 defines the basic requirements for chemical composition, mechanical properties and surface quality, DIN EN 10152 extends these specifications to include specific conditions for electrolytically galvanized products that offer additional corrosion protection. Both standards together ensure that DC01 is a versatile material with high quality and durability. FOR EN 10130 DC01 CHEMICAL , MECHANICAL DATA SHEET KINDLY VISIT https://www.ladhanimetal.in/page/en-10130-2006-chemical-and-mechanical-composition/689c322d2e585e299cb43798 https://www.ladhanimetal.in/page/en-10130-cold-rolled-flat-sheet-plate-coil-data-sheet-equivalent-grade-and-chemical-and-mechanical-properties/68a45503fc14472bb274df32