ISO 1234 Copper-Zinc (Brass) Alloy Cotter Pins

EN 10088-3 X12Cr13 is a martensitic stainless steel grade designed for applications requiring good strength, wear resistance, and moderate corrosion resistance. With approximately 12–13% chromium content, this grade offers reliable resistance to atmospheric corrosion and mild chemical environments while providing good mechanical properties after heat treatment. Supplied in rod and bar form, X12Cr13 stainless steel is widely used in engineering and industrial components where durability and dimensional stability are important. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel bars, rods, and related long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X12Cr13 stainless steel rods and bars. Our materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, controlled mechanical properties, and accurate dimensional tolerances. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X12Cr13): • X – High-alloy steel • 12 – Approx. 0.12% carbon content • Cr13 – Approx. 13% chromium Chemical Composition (% – typical limits): • Carbon (C): 0.08 – 0.15 • Chromium (Cr): 12.0 – 14.0 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 1.00 • Phosphorus (P): ≤ 0.040 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, depending on heat treatment): • Tensile Strength: 650 – 850 MPa • Yield Strength: ≥ 450 MPa • Elongation: 12 – 18% • Hardness: Can be increased significantly by quenching and tempering Key Features: • Martensitic stainless steel with good strength and wear resistance • Moderate corrosion resistance in mildly corrosive environments • Heat-treatable for improved hardness and mechanical performance • Good machinability in annealed condition • Suitable for precision-machined and structural components Material Characteristics: EN 10088-3 X12Cr13 stainless steel rod and bar offers a practical balance between mechanical strength and corrosion resistance. Its martensitic microstructure allows for flexibility in heat treatment, making it suitable for components subjected to mechanical stress and wear. Applications: • Shafts, spindles, and axles • Pump and valve components • Machine parts and engineering components • Fasteners and mechanical fittings • Industrial tools and equipment Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088-3 X12Cr13 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With dependable mechanical properties, heat-treatable characteristics, and moderate corrosion resistance, X12Cr13 stainless steel rod is a reliable choice for engineering and industrial applications. For size availability or technical support, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X2CrNi12 is a martensitic stainless steel grade designed for applications requiring a combination of good mechanical strength, moderate corrosion resistance, and excellent toughness. With chromium and nickel additions, this grade offers improved hardenability and better impact properties compared to straight chromium martensitic steels. Supplied in bar and rod form, X2CrNi12 stainless steel is widely used in mechanical and structural applications where strength and durability are essential. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel bars, rods, and related long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X2CrNi12 stainless steel rods and bars. Our materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, controlled mechanical properties, and precise dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X2CrNi12): • X – High-alloy steel • 2 – Approx. 0.02% carbon content • CrNi12 – Approx. 12% chromium with nickel addition Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.03 • Chromium (Cr): 11.0 – 13.0 • Nickel (Ni): 0.5 – 2.5 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 1.00 • Phosphorus (P): ≤ 0.040 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, depending on heat treatment): • Tensile Strength: 650 – 900 MPa • Yield Strength: ≥ 450 MPa • Elongation: 12 – 18% • Hardness: Can be increased by quenching and tempering Key Features: • Martensitic stainless steel with nickel addition • Good strength and toughness • Moderate corrosion resistance in mildly corrosive environments • Heat-treatable for improved hardness and wear resistance • Good impact properties compared to standard 12% Cr steels • Suitable for mechanical and structural components Material Characteristics: EN 10088-3 X2CrNi12 stainless steel rod and bar provides a balanced combination of strength, toughness, and corrosion resistance. Its martensitic structure allows heat treatment to achieve higher mechanical strength while maintaining reliable performance in service. Applications: • Shafts, rotors, and spindles • Turbine and power plant components • Mechanical and structural parts • Pump and valve components • Engineering and industrial machinery Conclusion: Ladhani Metal Corporation supplies premium quality EN 10088-3 X2CrNi12 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With good mechanical strength, heat-treatable properties, and dependable corrosion resistance, X2CrNi12 stainless steel bar is a reliable choice for engineering and industrial applications. For size availability or technical assistance, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X1CrNiMoCuN24-22-8 is a high-alloy austenitic stainless steel grade developed for applications requiring excellent corrosion resistance, high strength, and superior performance in aggressive environments. With high chromium and nickel content, along with molybdenum, copper, and nitrogen additions, this grade offers outstanding resistance to pitting, crevice corrosion, and stress corrosion cracking. Supplied in rod and bar form, X1CrNiMoCuN24-22-8 stainless steel is widely used in chemical processing, offshore, marine, and high-performance industrial applications. This grade conforms to the EN 10088-3 standard, which defines technical delivery conditions for stainless steel long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X1CrNiMoCuN24-22-8 stainless steel rods and bars. All materials are sourced from approved mills and supplied in compliance with EN 10088-3 requirements, ensuring precise chemical composition, consistent mechanical properties, and excellent dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X1CrNiMoCuN24-22-8): • X – High-alloy steel • 1 – Approx. 0.01% carbon content • CrNiMoCuN24-22-8 – Approx. 24% chromium, 22% nickel, 8% molybdenum, with copper and nitrogen Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.02 • Chromium (Cr): 23.0 – 25.0 • Nickel (Ni): 21.0 – 23.0 • Molybdenum (Mo): 7.0 – 9.0 • Copper (Cu): 0.5 – 2.0 • Nitrogen (N): 0.15 – 0.30 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.035 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, solution annealed): • Tensile Strength: 550 – 750 MPa • Yield Strength: ≥ 280 MPa • Elongation: ≥ 35% • Hardness: Typically ≤ 220 HB Key Features: • Super austenitic stainless steel with very high alloy content • Exceptional resistance to pitting, crevice corrosion, and chloride attack • High strength due to nitrogen addition • Excellent toughness and ductility • Good weldability with appropriate procedures • Suitable for severe corrosive and high-temperature environments Material Characteristics: EN 10088-3 X1CrNiMoCuN24-22-8 stainless steel rod and bar combines superior corrosion resistance with high mechanical strength and excellent structural stability. Its fully austenitic microstructure ensures outstanding performance in harsh chemical and marine environments. Applications: • Chemical processing equipment • Offshore and marine components • Heat exchangers and condensers • Pressure vessels and piping systems • Oil & gas and petrochemical applications • Desalination and seawater handling systems Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088-3 X1CrNiMoCuN24-22-8 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With exceptional corrosion resistance, high alloy strength, and reliable performance in aggressive environments, X1CrNiMoCuN24-22-8 stainless steel rod is an ideal choice for demanding industrial and engineering applications. For size availability or technical support, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar