Ladhani Metal Corporation offers SS 310 Half Round Tube Shields specifically designed to protect reheater (R/H) tubes in boilers, power plants, and industrial steam systems. Reheater tubes carry steam through the reheater section of the boiler, where the steam is reheated after partial expansion in the high-pressure turbine to improve efficiency and prevent moisture formation. Manufactured from high-temperature austenitic stainless steel grade SS 310, these shields offer outstanding resistance to oxidation, carburization, and scaling at elevated temperatures, making them suitable for extreme boiler environments. Function of R/H Tubes • Carry steam through the reheater section of the boiler • Exposed to very high temperatures (often > 540°C) and erosion from flue gases • Often protected with Half Round Tube Shields in areas where flue gas velocity and ash particles cause wear Ladhani Metal Corporation manufactures, supplies, and exports SS 310 Half Round Tube Shields in various lengths, diameters, and thicknesses, serving both domestic and international markets. SS 310 Grade Chemical Composition – Austenitic Stainless Steel • Carbon (C): ≤ 0.25% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.50% • Chromium (Cr): 24.00 – 26.00% • Nickel (Ni): 19.00 – 22.00% • Iron (Fe): Balance Applications: Suitable for reheater sections in thermal power plants, waste heat recovery boilers (WHRBs), and heat recovery steam generators (HRSGs) exposed to severe oxidation, scaling, and erosive flue gas conditions. Uses • Protects reheater tubes from erosion, oxidation, and soot blower impact • Shields R/H tubes in high-temperature, high-velocity flue gas zones • Extends operational life of boiler steam circuits in aggressive environments • Applicable in utility boilers, WHRBs, HRSGs, and petrochemical heaters Features • Excellent oxidation resistance – Withstands continuous service up to 1100°C • Superior scaling resistance – Performs well in cyclic temperature conditions • High chromium and nickel content – Enhances corrosion and heat resistance • Precision fit – Matches tube curvature for maximum shielding efficiency Applications • Power generation boilers – Long-term protection for reheater tubes under extreme thermal loads • Waste heat recovery systems – Safeguards tubes in erosive and high-temperature flue gas streams • Industrial steam plants – Maintains performance in fluctuating thermal cycles • Petrochemical furnaces – Suitable for aggressive reheating environments Conclusion The SS 310 Half Round Tube Shield for Reheater (R/H) Tubes by Ladhani Metal Corporation provides exceptional high-temperature and oxidation-resistant protection for critical steam circuit components. Designed for precision fit, durability, and long service life, these shields reduce wear, minimize downtime, and are available in a wide range of export-ready specifications. For technical details and supply inquiries, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #HalfRoundReheaterShield #ReheaterTubeShield #BoilerReheaterProtection #PowerPlantTubeShield

Ladhani Metal Corporation provides premium SS 304L Outer Half Round 90 Degree Bend Tube Shields, specifically designed to shield the outer curvature of 90-degree bends and U-bend tubes in boilers, heat exchangers, superheaters, and reheaters. Fabricated from austenitic stainless steel grade SS 304L, these shields offer enhanced corrosion resistance, superior weldability, and reliable performance in high-temperature and corrosive environments. Their semi-cylindrical form conforms precisely to the outer arc of curved tubes, acting as a robust barrier against fly ash erosion, flue gas corrosion, and thermal fatigue. By reducing wear on vulnerable bend sections, these shields contribute to longer tube life and lower maintenance costs. Ladhani Metal Corporation is a dependable manufacturer, supplier, and exporter of SS 304L Outer Half Round 90 Degree Bend Tube Shields, offering tailor-made shielding solutions to meet specific plant configurations and tube geometries. SS 304L Grade Chemical Composition – Austenitic Stainless Steel • Carbon (C): ≤ 0.035% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 12.0% • Iron (Fe): Balance Applications: Designed for use in power plants, heat exchangers, WHRBs, and industrial steam systems where U-bends and return bends require outer surface protection from erosion and corrosion. Uses • External protection of 90-degree return bends in boilers and superheaters • Shields for curved tube sections in petrochemical reformers and HRSGs • Ideal for tube bends in WHRBs, process heaters, and power plant steam circuits • Protects high-risk bend areas from gas impingement and soot-blower erosion Features • Excellent corrosion resistance – SS 304L withstands oxidation and chemical attack in flue gas environments • Durable construction – Fabricated from high-strength stainless steel for long service life • Thermal resilience – Maintains structural integrity under cyclic thermal loads • Precision fit – Custom-formed to match the outer radius of 90-degree bends • Versatile installation – Clamp-on, weld-on, or banded as per application needs • Customization available – Length, thickness, and radius can be tailored to project specifications Applications • Thermal power stations – Provides wear protection for curved superheater and reheater tubes • WHRBs and HRSGs – Shields return bends in exhaust heat recovery systems • Refineries – Used in process heater tubes and convection section bends • Chemical and pulp industries – Resists ash and gas corrosion in corrosive atmospheres Conclusion The SS 304L Outer Half Round 90 Degree Bend Tube Shield by Ladhani Metal Corporation delivers dependable protection to curved tube surfaces in boiler and heat recovery applications. Its corrosion-resistant material, form-fitting geometry, and high-temperature capability make it a practical solution for reducing tube failure and improving plant reliability. For custom sizing, material selection, or technical specifications, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #halftubeshield #utypehalftubeshield #tubeshieldexporter

Ladhani Metal Corporation offers high-quality SS 304 Outer Half Round 90 Degree Bend Tube Shields designed to protect the outer curvature of 90-degree bends and U-bend tubes in boilers, superheaters, reheaters, and heat exchangers. Manufactured from austenitic stainless steel grade SS 304, these shields combine corrosion resistance, mechanical strength, and thermal stability. The shields are ideal for high-temperature service where abrasive gas flow, fly ash erosion, and flue gas corrosion frequently damage external tube bends. The half-round semi-cylindrical geometry is engineered to conform precisely to the outer radius of curved tubes, forming a protective barrier that prevents tube thinning, cracking, and premature failure—ensuring long-term operational efficiency and equipment longevity. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of SS 304 Outer Half Round 90 Degree Bend Tube Shields, offering tailored solutions based on client specifications and boiler coil geometry. SS 304 Grade Chemical Composition – Austenitic Stainless steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 10.5% • Iron (Fe): Balance Applications: Designed for use in power plants, heat exchangers, WHRBs, and industrial steam systems where U-bends and return bends require outer surface protection from erosion and corrosion. Uses • External protection of 90-degree return bends in boilers and superheaters • Shields for curved tube sections in petrochemical reformers and HRSGs • Ideal for tube bends in WHRBs, process heaters, and power plant steam circuits • Protects high-risk bend areas from gas impingement and soot-blower erosion Features • Excellent corrosion resistance – SS 304 withstands general oxidation and chemical attack in flue gas environments • Durable construction – Fabricated from high-strength stainless steel for long service life • Thermal resilience – Maintains structural integrity under cyclic thermal loads • Precision fit – Custom-formed to match the outer radius of 90-degree bends • Versatile installation – Clamp-on, weld-on, or banded as per application needs • Customization available – Length, thickness, and radius can be tailored to project specifications Applications • thermal power stations – Provides wear protection for curved superheater and reheater tubes • WHRBs and HRSGs – Shields return bends in exhaust heat recovery systems • refineries – Used in process heater tubes and convection section bends • chemical and pulp industries – Resists ash and gas corrosion in corrosive atmospheres Conclusion The SS 304 Outer Half Round 90 Degree Bend Tube Shield by Ladhani Metal Corporation delivers dependable protection to curved tube surfaces in boiler and heat recovery applications. Its corrosion-resistant material, form-fitting geometry, and high-temperature capability make it a practical solution for reducing tube failure and improving plant reliability. For technical assistance, material availability, or custom sizing, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #halftubeshield #utypehalftubeshield #tubeshieldexporter

DIN 2628 Duplex steel flanges PN 250 are high-strength weld neck flanges designed according to the DIN 2628 standard for use in high-pressure systems up to 250 bar (3625 psi). Fabricated from Duplex stainless steels, these flanges offer an ideal balance of strength and corrosion resistance, combining the beneficial properties of both austenitic and ferritic stainless steels. Their robust mechanical performance, excellent resistance to stress corrosion cracking, and superior weldability make them well-suited for critical applications in aggressive service environments. Ladhani Metal Corporation manufactures and exports premium-grade Duplex steel flanges that meet stringent international standards for quality, reliability, and performance. Our DIN 2628 PN 250 Duplex steel weld neck flanges are widely used in sectors such as oil and gas, desalination, petrochemical processing, pulp and paper, and marine industries. With precision engineering and consistent quality, these flanges are designed to withstand high pressure, corrosive media, and mechanical stress. Pressure Rating: • PN 250 (250 bar / 3625 psi): Suitable for high-pressure systems requiring excellent structural integrity, corrosion resistance, and reliable sealing in dynamic conditions. Flange Type: • Weld Neck Flanges These flanges feature a tapered neck, offering high fatigue resistance by reducing stress concentration at the weld area. Ideal for applications with high pressure, high temperature, or repeated thermal cycling. • Flat Face (FF) Flanges Flat face design provides uniform gasket loading, minimizing the risk of flange deformation. Suitable for systems using brittle materials or low-pressure cast components. Duplex Steel Grades and Composition: Duplex 2205 (UNS S32205 / S31803) • Chromium (Cr): 21.0 – 23.0% • Nickel (Ni): 4.5 – 6.5% • Molybdenum (Mo): 2.5 – 3.5% • Nitrogen (N): 0.14 – 0.20% • Iron (Fe): Balance • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Carbon (C): ≤ 0.03% Applications: Offers excellent corrosion resistance, particularly to chloride-induced stress corrosion cracking and pitting. Commonly used in offshore oil rigs, chemical tanks, heat exchangers, and pressure vessels. Applications of DIN 2628 Duplex Steel Flanges PN 250: • Oil and Gas Exploration Resistant to sour gas, chloride attack, and high mechanical loads in subsea and topside environments. • Chemical Processing Plants Used in aggressive chemical systems, reactors, and storage vessels requiring high corrosion resistance. • Marine and Offshore Structures Reliable in saltwater applications, such as ballast systems, risers, and flowlines. • Pulp and Paper Industry Withstands acidic and alkaline process chemicals used in bleaching and pulping operations. • Water Treatment and Desalination Ideal for handling brine and high-chloride content fluids in RO and thermal desalination systems. Key Features: • Conforms to DIN 2628 standards • PN 250 pressure rating for high-pressure, heavy-duty systems • Weld neck configuration for excellent mechanical support and minimal stress concentration • Flat face variant ensures even gasket loading and leak-proof operation • Available in Duplex 2205 and Super Duplex 2507 grades • Excellent resistance to chloride stress corrosion, pitting, and crevice corrosion • High tensile and yield strength for demanding industrial conditions • Custom sizes, pressure ratings, and surface finishes available upon request Conclusion: DIN 2628 Duplex Steel Flanges PN 250 from Ladhani Metal Corporation are the optimal solution for applications requiring superior corrosion resistance, high mechanical strength, and reliable sealing performance under extreme pressure. Available in Duplex 2205 and Super Duplex 2507, these flanges offer outstanding performance across various aggressive industrial environments. For detailed technical specifications or to request a customized quotation, please contact Ladhani Metal Corporation.

DIN 2527 SS 321 Blind Flanges are specialized components used in industrial piping systems to close off the ends of pipes or equipment where no further connection is necessary. A blind flange is a solid, flat disc without a central bore, specifically designed to seal the open end of a pipe or a vessel. The DIN 2527 standard, developed by the German Institute for Standardization, defines the specifications for these flanges, ensuring that they meet high standards for dimensional accuracy, pressure tolerance, and mechanical strength. The SS 321 material, used for the production of these blind flanges, is an austenitic stainless steel known for its excellent resistance to high-temperature oxidation, corrosion, and scaling. The addition of titanium to this steel stabilizes its structure, making it suitable for environments where temperatures fluctuate or are consistently high. As a result, SS 321 blind flanges are frequently used in industries where both strength and resistance to harsh environmental conditions are paramount, including the chemical, petrochemical, aerospace, and power generation industries. By utilizing DIN 2527 SS 321 Blind Flanges, companies can ensure secure, long-lasting, and efficient closures for piping systems under challenging operational conditions. These flanges are essential in maintaining the integrity of systems exposed to elevated pressures and corrosive substances, ensuring the safe containment of fluids and gases. key Features of DIN 2527 SS 321 Blind Flanges: Material Composition of SS 321: Carbon (C): ≤ 0.08% Chromium (Cr): 17.0 - 19.0% Nickel (Ni): 9.0 - 12.0% Titanium (Ti): 5 times the carbon content, generally around 0.60% minimum, to prevent carbide precipitation. Manganese (Mn): 2.00% max Silicon (Si): 1.00% max Phosphorus (P): 0.045% max Sulfur (S): 0.030% max Pressure and Temperature Resistance: Operating Temperature: SS 321 can perform well in high-temperature environments, up to 900°C (1650°F) intermittently and up to around 700°C (1292°F) for continuous service. Design and Dimensions of DIN 2527 Blind Flanges: Pressure Ratings: The design of a DIN 2527 blind flange is primarily based on pressure class ratings (such as PN6, PN10, PN16, etc.), which denote the maximum pressure the flange can safely withstand. Bolt Holes: The number and size of bolt holes for DIN 2527 blind flanges are specified according to the flange's pressure class and size. The bolt pattern is designed to ensure a tight seal and accommodate appropriate bolt sizes for a given pressure class. Thickness: The thickness of a blind flange can vary depending on the pressure rating and size, with thicker flanges being required for higher pressure applications. Nominal Diameter: Blind flanges are available in various nominal pipe diameters (DN) ranging from DN10 (1/2 inch) up to DN600 (24 inches) or more. Types of DIN 2527 SS 321 Blind Flanges: Standard Blind Flange (Type A): A solid, circular flange used to seal the end of a pipe or vessel. Common for general applications. Flat-Faced Blind Flange: Has a flat sealing surface, ideal for low-pressure systems and tight sealing. Raised Face Blind Flange: Features a raised surface around the center for better sealing in higher pressure systems. Ring-Type Joint (RTJ) Blind Flange: Has a groove for an RTJ gasket, designed for high-pressure applications, often used in the oil and gas industry. Long Weld Neck Blind Flange: Has an extended neck for welding, providing additional strength and used in high-pressure or stressed systems.

A DIN 2527 AISI 4140 blind flange is a specialized type of blind flange made from AISI 4140 alloy steel, adhering to the DIN 2527 German standard. Blind flanges are crucial components in piping systems, used to seal the end of a pipe, vessel, or valve to isolate it or stop the flow of fluids. The AISI 4140 material used for this specific flange is a high-strength alloy steel known for its robustness and excellent mechanical properties, making it ideal for high-stress applications. AISI 4140, a chromium-molybdenum alloy steel, is renowned for its excellent mechanical properties, including high tensile strength, hardness, and resistance to wear. It is often used in heavy-duty applications such as in the automotive, aerospace, and oil & gas industries, where the need for robust materials is crucial. The use of AISI 4140 steel in a DIN 2527 blind flange ensures that the flange can handle high pressures, temperatures, and mechanical stresses without compromising on performance or safety. Material: AISI 4140 Alloy Steel Composition: AISI 4140 is a medium-carbon steel alloy that contains chromium (Cr) and molybdenum (Mo) as its primary alloying elements. These elements improve the steel's hardness, strength, and wear resistance. Key Properties: Strength: High tensile strength and yield strength, making it capable of withstanding high loads and stress in high-pressure applications. Toughness: Offers excellent toughness and impact resistance, making it suitable for challenging environments where forces are dynamic. Hardness: Can be heat-treated to achieve high hardness levels, providing resistance to wear and abrasion. Corrosion Resistance: While AISI 4140 is not as corrosion-resistant as stainless steel, it can still perform well in less corrosive environments with proper surface treatment (e.g., coatings or galvanizing). Design and Dimensions (DIN 2527) Shape: The blind flange is a flat, circular plate with no central hole. Its purpose is to seal the end of a pipe or vessel, effectively "closing" the pipeline or system. Bolt Holes: The flange has evenly spaced bolt holes around the perimeter, allowing it to be bolted securely to the corresponding flange or fitting in the system. These holes align with the bolt pattern of other components. Thickness: The flange thickness varies depending on the size, pressure class, and specific application requirements. It is designed to withstand internal pressure while providing a reliable seal. Pressure Rating: Flanges are typically rated according to pressure classes such as PN 6, PN 10, PN 16, PN 25, etc., indicating the maximum pressure the flange can safely handle without failure. Applications Pipeline Sealing: The primary function of a blind flange is to seal the open end of a pipeline, preventing the passage of fluids, gases, or other materials through the system. System Isolation: Blind flanges are used to isolate a section of the system for maintenance or repairs, allowing for safe disconnection of parts while maintaining system integrity. Pressure Containment: AISI 4140 blind flanges are also used in applications where maintaining pressure within a system is critical. The high strength and durability of AISI 4140 make it suitable for use in high-pressure environments. Types of Blind Flanges in DIN 2527 Raised Face (RF): The flange surface has a small raised area around the bolt circle to improve sealing when mated with a gasket. Flat Face (FF): The flange surface is level with the flange body, typically used with softer gaskets to create a seal. Ring Type Joint (RTJ): The flange may feature a groove to accommodate a metal ring gasket for high-pressure applications, providing a secure, reliable seal.

Ladhani Metal Corporation manufactures high-quality Copper Alloy Cotter Pins in compliance with the ISO 1234 standard, ensuring optimal performance and durability in a wide range of applications. These Cotter pins are precision-engineered to meet the demanding needs of industries such as automotive, aerospace, marine, and heavy machinery, providing a secure fastening solution for components that require a reliable, vibration-resistant fastener. Key Features: Material: Made from premium copper alloy, these Cotter pins offer excellent corrosion resistance, particularly in environments where moisture, salt, or other corrosive elements are prevalent. The copper alloy used ensures enhanced durability and longevity, making them ideal for harsh conditions. Dimensions and Tolerances: The Cotter pins are available in various sizes, with a precise tolerance for diameter and length, ensuring a secure and exact fit into corresponding holes. These pins are carefully crafted to ensure smooth insertion and effective locking, even under high-pressure or dynamic conditions. Cotter Design: Featuring a unique Cotter design, the pin consists of two prongs that can be bent outward once inserted through a hole, forming a secure, mechanical lock. This prevents any movement or loosening, even in high-vibration environments, making them an essential component for assemblies where stability is crucial. Corrosion Resistance: Copper alloys are renowned for their natural resistance to corrosion, especially in marine, aerospace, and chemical processing environments. These Cotter pins remain reliable and effective over time, even in the harshest conditions, helping to reduce maintenance needs and downtime. Strength and Durability: The copper alloy provides exceptional strength, ensuring the Cotter pins perform well under mechanical stress without bending or breaking. The pins offer resistance to fatigue and wear, maintaining their locking integrity throughout the life cycle of the assembly. Applications: Copper alloy Cotter pins from Ladhani Metal Corporation are used in a variety of industries: Automotive: Securely fastening components like axles, wheels, and shafts. Aerospace: For locking parts and components in aircraft systems where strength and lightweight properties are essential. Marine: Resistant to saltwater corrosion, these pins are ideal for use in marine equipment and vessels. Heavy Machinery and Engineering: Used in construction and industrial machinery to hold components in place under high load and vibration. Our Domestic reach is unlimited and we supply to this following cities Ahmedabad, Amritsar, Aurangabad, Bangalore, Bhopal, Chandigarh, Chennai, Coimbatore, Dhanbad, Faridabad, Ghaziabad, Guwahati, Gwalior, Howrah, Hyderabad, Indore, Jabalpur, Jaipur, Jodhpur, Kanpur, Kolkata, Kota, Lucknow, Ludhiana, Madurai, Meerut, Mumbai, Nagpur, Nashik, Navi Mumbai, New Delhi, Patna, Pune, Raipur, Rajkot, Ranchi, Solapur, Srinagar, Surat, Thane, Vadodara, Varanasi, Vijayawada, Visakhapatnam, Hubballi, Tiruchirappalli, Bareilly, Moradabad, Mysore, Gurgaon, Aligarh, Jalandhar, Bhubaneswar We export to following Countries: Russia, Canada, United States, China, Brazil, Australia, Argentina, Kazakhstan, Algeria, Denmark, Saudi Arabia, Mexico, Indonesia, Iran, Mongolia, Peru, South Africa, Colombia, Ethiopia, Bolivia, Egypt, Venezuela, Turkey, Chile, Myanmar, France, Ukraine, Madagascar, Botswana, Kenya, Thailand, Spain, Sweden, Uzbekistan, Morocco, Paraguay, Zimbabwe, Norway, Japan, Germany, Republic of the Congo, Finland, Vietnam, Malaysia, Poland, Oman, Italy, Philippines, Ecuador, New Zealand, United Kingdom, Guinea, Uganda, Nepal, Bangladesh

Ladhani Metal Corporation offers premium ISO 1234 Stainless Steel Cotter Pins, engineered for superior performance in a wide range of applications where secure fastening and reliability are paramount. Manufactured from high-quality stainless steel, these Cotter pins are designed to provide excellent resistance to corrosion, mechanical wear, and environmental factors, making them ideal for use in demanding industrial and engineering environments. Key Features of ISO 1234 Stainless Steel Cotter Pins: Corrosion Resistance: Made from stainless steel, these Cotter pins offer exceptional resistance to rust, corrosion, and oxidation, even in harsh environments like marine, chemical, and outdoor settings. Durability & Strength: Stainless steel's inherent strength ensures that the Cotter pins can withstand heavy loads, vibration, and mechanical stress, maintaining their integrity over time. Versatility: Available in a variety of sizes and configurations, can be used in a wide range of applications, including mechanical assemblies, automotive parts, and structural components. Non-Magnetic: As stainless steel is generally non-magnetic, these Cotter pins are suitable for applications where magnetic interference is a concern. Wear Resistance: Stainless steel Cotter pins are highly resistant to wear, ensuring a long service life even under demanding conditions. Applications: Automotive: Used for securing various automotive parts, including wheels, axles, suspension components, and more, where corrosion resistance and strength are essential. Industrial Equipment: Ideal for fastening components in machinery, pumps, motors, and construction equipment exposed to dirt, dust, and corrosive environments. Aerospace: Commonly used in aircraft assembly and maintenance, where reliability and resistance to environmental factors like moisture and chemicals are crucial. Marine: Perfect for use in marine environments, where stainless steel's resistance to saltwater corrosion ensures durability and long-term performance. Construction: Utilized in structural components and heavy machinery where secure fastening is essential, and corrosion resistance is critical for the longevity of the assembly. We also manufacture in ISO 1234 Stainless steel Cotter pins in stainless steel 316,Stainless steel 310 & Stainless steel 309. Our Domestic reach is unlimited and we supply to this following cities Ahmedabad, Amritsar, Aurangabad, Bangalore, Bhopal, Chandigarh, Chennai, Coimbatore, Dhanbad, Faridabad, Ghaziabad, Guwahati, Gwalior, Howrah, Hyderabad, Indore, Jabalpur, Jaipur, Jodhpur, Kanpur, Kolkata, Kota, Lucknow, Ludhiana, Madurai, Meerut, Mumbai, Nagpur, Nashik, Navi Mumbai, New Delhi, Patna, Pune, Raipur, Rajkot, Ranchi, Solapur, Srinagar, Surat, Thane, Vadodara, Varanasi, Vijayawada, Visakhapatnam, Hubballi, Tiruchirappalli, Bareilly, Moradabad, Mysore, Gurgaon, Aligarh, Jalandhar, Bhubaneswar We export to following Countries: Russia, Canada, United States, China, Brazil, Australia, Argentina, Kazakhstan, Algeria, Denmark, Saudi Arabia, Mexico, Indonesia, Iran, Mongolia, Peru, South Africa, Colombia, Ethiopia, Bolivia, Egypt, Venezuela, Turkey, Chile, Myanmar, France, Ukraine, Madagascar, Botswana, Kenya, Thailand, Spain, Sweden, Uzbekistan, Morocco, Paraguay, Zimbabwe, Norway, Japan, Germany, Republic of the Congo, Finland, Vietnam, Malaysia, Poland, Oman, Italy, Philippines, Ecuador, New Zealand, United Kingdom, Guinea, Uganda, Nepal, Bangladesh

Ladhani Metal Corporation offers premium ISO 1234 Stainless Steel Cotter Pins, engineered for superior performance in a wide range of applications where secure fastening and reliability are paramount. Manufactured from high-quality stainless steel, these Cotter pins are designed to provide excellent resistance to corrosion, mechanical wear, and environmental factors, making them ideal for use in demanding industrial and engineering environments. Key Features of ISO 1234 Stainless Steel Cotter Pins: Corrosion Resistance: Made from stainless steel, these Cotter pins offer exceptional resistance to rust, corrosion, and oxidation, even in harsh environments like marine, chemical, and outdoor settings. Durability & Strength: Stainless steel's inherent strength ensures that the Cotter pins can withstand heavy loads, vibration, and mechanical stress, maintaining their integrity over time. Versatility: Available in a variety of sizes and configurations, can be used in a wide range of applications, including mechanical assemblies, automotive parts, and structural components. Non-Magnetic: As stainless steel is generally non-magnetic, these Cotter pins are suitable for applications where magnetic interference is a concern. Wear Resistance: Stainless steel Cotter pins are highly resistant to wear, ensuring a long service life even under demanding conditions. Applications: Automotive: Used for securing various automotive parts, including wheels, axles, suspension components, and more, where corrosion resistance and strength are essential. Industrial Equipment: Ideal for fastening components in machinery, pumps, motors, and construction equipment exposed to dirt, dust, and corrosive environments. Aerospace: Commonly used in aircraft assembly and maintenance, where reliability and resistance to environmental factors like moisture and chemicals are crucial. Marine: Perfect for use in marine environments, where stainless steel's resistance to saltwater corrosion ensures durability and long-term performance. Construction: Utilized in structural components and heavy machinery where secure fastening is essential, and corrosion resistance is critical for the longevity of the assembly. We also manufacture in ISO 1234 Stainless steel Cotter pins in stainless steel 316,Stainless steel 310 & Stainless steel 309. Our Domestic reach is unlimited and we supply to this following cities Ahmedabad, Amritsar, Aurangabad, Bangalore, Bhopal, Chandigarh, Chennai, Coimbatore, Dhanbad, Faridabad, Ghaziabad, Guwahati, Gwalior, Howrah, Hyderabad, Indore, Jabalpur, Jaipur, Jodhpur, Kanpur, Kolkata, Kota, Lucknow, Ludhiana, Madurai, Meerut, Mumbai, Nagpur, Nashik, Navi Mumbai, New Delhi, Patna, Pune, Raipur, Rajkot, Ranchi, Solapur, Srinagar, Surat, Thane, Vadodara, Varanasi, Vijayawada, Visakhapatnam, Hubballi, Tiruchirappalli, Bareilly, Moradabad, Mysore, Gurgaon, Aligarh, Jalandhar, Bhubaneswar We export to following Countries: Russia, Canada, United States, China, Brazil, Australia, Argentina, Kazakhstan, Algeria, Denmark, Saudi Arabia, Mexico, Indonesia, Iran, Mongolia, Peru, South Africa, Colombia, Ethiopia, Bolivia, Egypt, Venezuela, Turkey, Chile, Myanmar, France, Ukraine, Madagascar, Botswana, Kenya, Thailand, Spain, Sweden, Uzbekistan, Morocco, Paraguay, Zimbabwe, Norway, Japan, Germany, Republic of the Congo, Finland, Vietnam, Malaysia, Poland, Oman, Italy, Philippines, Ecuador, New Zealand, United Kingdom, Guinea, Uganda, Nepal, Bangladesh