Ladhani Metal Corporation offers SS 310 Half Round Tube Shields specifically designed to protect reheater (R/H) tubes in boilers, power plants, and industrial steam systems. Reheater tubes carry steam through the reheater section of the boiler, where the steam is reheated after partial expansion in the high-pressure turbine to improve efficiency and prevent moisture formation. Manufactured from high-temperature austenitic stainless steel grade SS 310, these shields offer outstanding resistance to oxidation, carburization, and scaling at elevated temperatures, making them suitable for extreme boiler environments. Function of R/H Tubes • Carry steam through the reheater section of the boiler • Exposed to very high temperatures (often > 540°C) and erosion from flue gases • Often protected with Half Round Tube Shields in areas where flue gas velocity and ash particles cause wear Ladhani Metal Corporation manufactures, supplies, and exports SS 310 Half Round Tube Shields in various lengths, diameters, and thicknesses, serving both domestic and international markets. SS 310 Grade Chemical Composition – Austenitic Stainless Steel • Carbon (C): ≤ 0.25% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.50% • Chromium (Cr): 24.00 – 26.00% • Nickel (Ni): 19.00 – 22.00% • Iron (Fe): Balance Applications: Suitable for reheater sections in thermal power plants, waste heat recovery boilers (WHRBs), and heat recovery steam generators (HRSGs) exposed to severe oxidation, scaling, and erosive flue gas conditions. Uses • Protects reheater tubes from erosion, oxidation, and soot blower impact • Shields R/H tubes in high-temperature, high-velocity flue gas zones • Extends operational life of boiler steam circuits in aggressive environments • Applicable in utility boilers, WHRBs, HRSGs, and petrochemical heaters Features • Excellent oxidation resistance – Withstands continuous service up to 1100°C • Superior scaling resistance – Performs well in cyclic temperature conditions • High chromium and nickel content – Enhances corrosion and heat resistance • Precision fit – Matches tube curvature for maximum shielding efficiency Applications • Power generation boilers – Long-term protection for reheater tubes under extreme thermal loads • Waste heat recovery systems – Safeguards tubes in erosive and high-temperature flue gas streams • Industrial steam plants – Maintains performance in fluctuating thermal cycles • Petrochemical furnaces – Suitable for aggressive reheating environments Conclusion The SS 310 Half Round Tube Shield for Reheater (R/H) Tubes by Ladhani Metal Corporation provides exceptional high-temperature and oxidation-resistant protection for critical steam circuit components. Designed for precision fit, durability, and long service life, these shields reduce wear, minimize downtime, and are available in a wide range of export-ready specifications. For technical details and supply inquiries, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #HalfRoundReheaterShield #ReheaterTubeShield #BoilerReheaterProtection #PowerPlantTubeShield

Ladhani Metal Corporation offers 1Cr20Ni14Si2 Boiler Half Round Tube Shields engineered for superior tube protection in high-temperature and corrosive boiler environments. Manufactured from a heat-resistant austenitic stainless steel alloy with high chromium, nickel, and silicon content, 1Cr20Ni14Si2 provides exceptional resistance to oxidation, carburization, and scaling. These shields are accurately formed into a half-round profile to fit securely over straight sections of boiler tubes. They act as a durable protective barrier against high-velocity flue gases, soot blower impact, and particulate erosion, significantly increasing tube service life and reducing unscheduled maintenance. Ladhani Metal Corporation manufactures, supplies, and exports 1Cr20Ni14Si2 Boiler Half Round Tube Shields in various sizes, lengths, and thicknesses to meet the exact specifications of clients across domestic and international markets. 1Cr20Ni14Si2 Grade Chemical Composition – Heat Resistant Austenitic Stainless Steel • Carbon (C): ≤ 0.15% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): 1.00 – 2.00% • Chromium (Cr): 19.00 – 21.00% • Nickel (Ni): 13.00 – 15.00% • Iron (Fe): Balance Uses • Shields straight boiler tubes in superheater and reheater sections • Protects against oxidation, scaling, and abrasive flue gas erosion • Suitable for applications requiring excellent high-temperature stability • Extends operational life of boiler tubes in severe service conditions Features • High chromium-nickel-silicon alloy – Ensures outstanding oxidation and scaling resistance • Excellent thermal stability – Maintains mechanical strength at elevated temperatures • Precision half-round profile – Guarantees accurate and secure tube coverage • Long-lasting protection – Withstands high-temperature flue gas environments • Flexible installation – Compatible with welding, clamping, or banding methods • Export quality – Manufactured to meet global standards for durability and performance Applications • Power generation plants – Protects tubes in superheater and reheater assemblies • Petrochemical refineries – Resists carburization and oxidation in furnace atmospheres • Waste heat recovery boilers – Guards tubes in high-temperature gas flow zones • Cement and metallurgy industries – Provides protection in abrasive and thermal cycling environments Conclusion The 1Cr20Ni14Si2 Boiler Half Round Tube Shield from Ladhani Metal Corporation is specifically designed for extreme temperature and corrosive boiler environments. Its high chromium, nickel, and silicon composition delivers unmatched oxidation resistance and mechanical stability, ensuring long-lasting protection for critical boiler components. Available in customized sizes for both domestic and international supply, these shields provide dependable and efficient boiler tube safeguarding. For detailed specifications and global export services, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield

Ladhani Metal Corporation offers Cr25Ni20 Boiler Half Round Tube Shields designed for exceptional durability and performance in extreme high-temperature boiler and heat exchanger environments. Manufactured from heat-resistant austenitic stainless steel containing high chromium and nickel content, Cr25Ni20 provides outstanding resistance to oxidation, carburization, and scaling at elevated service temperatures. The shields are precisely formed into a half-round profile to ensure accurate fitment over straight sections of boiler tubes. They act as a robust barrier against abrasive flue gases, particulate erosion, and soot blower impact, thereby extending tube life and reducing the frequency of maintenance shutdowns. Ladhani Metal Corporation manufactures, supplies, and exports Cr25Ni20 Boiler Half Round Tube Shields in various sizes, thicknesses, and lengths to meet both domestic and international market demands. Cr25Ni20 Grade Chemical Composition – Heat Resistant Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.50% • Chromium (Cr): 24.00 – 26.00% • Nickel (Ni): 19.00 – 22.00% • Iron (Fe): Balance Applications: Ideal for high-temperature industrial boilers, waste heat recovery units, and process heaters operating in oxidizing and carburizing conditions. Uses • Shields straight boiler tubes in superheaters and reheaters • Protects against oxidation, scaling, and hot gas erosion • Suitable for applications involving carburizing atmospheres • Reduces wear from high-velocity particulate-laden flue gases Features • Extreme heat resistance – Performs reliably above 1100°C in continuous service • High chromium-nickel content – Ensures superior oxidation and scaling resistance • Excellent creep strength – Maintains structural integrity under prolonged heat exposure • Accurate fitment – Precision-formed half-round profile for effective tube coverage • Versatile installation – Compatible with welding, clamping, or banding methods • Export quality – Manufactured to meet global industrial standards Applications • Thermal power plants – Protects superheater and reheater tubes in extreme heat zones • Waste heat boilers – Guards tubes in high-temperature gas recovery systems • Petrochemical heaters – Withstands carburizing and oxidizing furnace conditions • Cement and metallurgy industries – Provides long-term tube protection in harsh environments Conclusion The Cr25Ni20 Boiler Half Round Tube Shield from Ladhani Metal Corporation delivers unmatched performance in high-temperature, oxidizing, and carburizing environments. Its high chromium and nickel content ensures long-lasting resistance to scaling and oxidation, while precision manufacturing guarantees a secure fit and effective tube protection. For technical details or export orders, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield

Ladhani Metal Corporation offers SS 310S Boiler Half Round Tube Shields designed for protecting straight boiler and heat exchanger tubes in high-temperature and oxidizing environments. SS 310S is a low-carbon version of SS 310, providing improved weldability and reduced risk of sensitization while maintaining excellent high-temperature strength and resistance to oxidation. These shields are ideal for applications such as power boilers, furnaces, HRSGs, and heat recovery units operating at elevated temperatures up to 1100°C. The shield is formed with a precise half-round profile to ensure tight contact with the outer surface of the tube, delivering effective mechanical protection against soot blower erosion, ash abrasion, and thermal cycling. SS 310S shields are engineered to maintain dimensional stability and corrosion resistance even after prolonged exposure to intense heat. Ladhani Metal Corporation manufactures, supplies, and exports SS 310S Boiler Half Round Tube Shields in various diameters, lengths, and thicknesses to suit diverse boiler system configurations across global markets. SS 310S Grade Chemical Composition – Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.50% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Applications: Ideal for high-temperature boilers, flue gas systems, superheaters, and industrial heating units operating in oxidizing and mildly reducing conditions. Uses • Protection of straight tubes in high-temperature steam and flue gas paths • Installed in superheater and reheater sections of utility boilers • Prevents tube scaling and erosion in thermal power systems • Used in waste heat recovery boilers and furnace wall protection • Suitable for corrosive gas environments in petrochemical and metallurgical units Features • Superior oxidation resistance – Maintains integrity under prolonged thermal exposure • Low carbon content – Reduces risk of sensitization after welding • High thermal stability – Withstands fluctuating heat without deformation • Precision-engineered fit – Half-round profile ensures close tube contact • Flexible installation – Suitable for clamping, welding, or banding • Global compatibility – Export-ready and customizable to international standards Applications • Power generation – Shields boiler tubes in high-heat zones • Petrochemical plants – Used in corrosive, oxidizing, and carburizing atmospheres • Refineries and steel mills – Withstands aggressive thermal conditions • Industrial furnaces – Provides extended service life in extreme environments Conclusion The SS 310S Boiler Half Round Tube Shield from Ladhani Metal Corporation is a high-performance solution for tube protection in high-temperature and oxidizing conditions. With enhanced weldability, corrosion resistance, and thermal durability, SS 310S shields are ideal for critical boiler and process heat systems. For technical support, custom dimensions, or export orders, contact Ladhani Metal Corporation.

Ladhani Metal Corporation offers SS 310 Boiler Half Round Tube Shields designed to provide high-temperature and oxidation resistance for straight boiler tubes in extreme heat environments. Manufactured from austenitic stainless steel grade SS 310, these shields deliver excellent strength, thermal stability, and resistance to scaling at elevated temperatures, making them suitable for furnaces, power boilers, and heat recovery units where temperatures may exceed 1000°C. SS 310 is particularly effective in environments containing oxidizing gases and thermal cycling. Each shield is precision-formed into a half-round profile to closely fit the outer surface of boiler tubes, ensuring effective mechanical protection against soot blower erosion, high-velocity gas flow, and abrasive ash particles. Ladhani Metal Corporation manufactures, supplies, and exports SS 310 Boiler Half Round Tube Shields in a variety of lengths, diameters, and thicknesses to meet the exact requirements of industrial, thermal, and power sector applications in both domestic and international markets. SS 310 Grade Chemical Composition – Austenitic Stainless Steel • Carbon (C): ≤ 0.25% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.50% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Applications: Ideal for use in high-temperature boilers, heat exchangers, and industrial heating systems exposed to oxidizing and carburizing atmospheres. Uses • Protection of straight boiler tubes in extreme temperature conditions • Installed in radiant sections and furnace walls of high-heat boilers • Guards against scaling and oxidation in flue gas zones • Suitable for waste heat recovery systems and incinerators • Used in chemical, steel, and cement plants where high thermal resistance is required Features • High-temperature resistance – Performs in continuous service above 1000°C • Excellent oxidation resistance – Suitable for oxidizing and mildly reducing atmospheres • Strong mechanical performance – Retains strength under elevated heat and stress • Precise fit – Half-round geometry for full tube coverage and secure installation • Multiple installation options – Can be clamped, banded, or tack welded • Export quality – Manufactured to meet global standards for heat-resistant applications Applications • Power generation – Shields boiler tubes from oxidation in superheaters and economizers • Chemical processing – Suitable for corrosive and high-temperature gas exposure • Steel and metallurgical plants – Used in reheat furnaces and combustion zones • Cement and incineration units – Withstands abrasive and oxidizing conditions Conclusion The SS 310 Boiler Half Round Tube Shield from Ladhani Metal Corporation provides long-lasting, high-temperature protection for straight boiler tubes operating in the most demanding thermal environments. With superior resistance to heat, scaling, and oxidation, these shields are a reliable solution for industrial boilers and heat systems worldwide. For custom sizing, export inquiries, or technical specifications, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #halftubeshield #utypehalftubeshield #tubeshieldexporter

Ladhani Metal Corporation offers 1Cr25Ni20Si2 Outer Half Round 90 Degree Bend Tube Shields specifically designed to protect the outer curvature of U-bends and 90-degree turns in high-temperature tubes used in boilers, superheaters, reheaters, heat exchangers, and industrial furnaces. Made from high-alloy austenitic stainless steel grade 1Cr25Ni20Si2, these shields provide excellent resistance to oxidation, high-temperature corrosion, and thermal fatigue. The added silicon content enhances the steel’s oxidation resistance and structural stability in severe thermal environments. The semi-cylindrical design is precisely formed to contour the bend radius of return tubes, creating an effective barrier against particulate erosion, ash impact, and high-velocity gas flow. 1Cr25Ni20Si2 shields are ideal for thermal power generation and industrial systems exposed to oxidizing, carburizing, and dry corrosive atmospheres. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of 1Cr25Ni20Si2 Outer Half Round 90 Degree Bend Tube Shields, offering tailored configurations to meet diverse thermal protection requirements. 1Cr25Ni20Si2 Grade Chemical Composition – Austenitic Heat-Resistant Steel • Carbon (C): ≤ 0.15% • Manganese (Mn): ≤ 1.50% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): 1.50 – 2.50% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Applications: Suitable for high-temperature systems in boilers, reheaters, thermal incinerators, and petrochemical furnaces where resistance to oxidation, scaling, and heat-induced deformation is critical. Uses • Shields 90-degree curved tube sections in superheaters, reheaters, and economizers • Applied in high-temperature HRSG and WHRB coils exposed to harsh flue gases • Protects against scaling, oxidation, and high-velocity particulate erosion • Used in industrial furnaces, reformers, and exhaust gas boilers requiring thermal durability Features • Superior oxidation resistance – Silicon addition enhances resistance to scale formation at elevated temperatures • High-temperature performance – Withstands sustained thermal stress and cyclic heating • Structural stability – Maintains mechanical integrity during long-term high-temperature exposure • Accurate form – Manufactured to match specific bend radii and pipe sizes for full coverage • Flexible mounting – Can be installed using welding, banding, or mechanical clamps • Custom availability – Offered in various wall thicknesses, bend angles, lengths, and diameters Applications • Thermal power plants – Guards steam tubing and return bends from thermal wear and surface damage • Waste heat recovery units – Shields tube bends from high-temperature gas erosion • Petrochemical furnaces – Used in radiant coils and transfer lines operating at extreme temperatures • Metallurgical and cement industries – Protects heat exchange tubes exposed to oxidizing and abrasive conditions Conclusion The 1Cr25Ni20Si2 Outer Half Round 90 Degree Bend Tube Shield by Ladhani Metal Corporation provides high-performance protection in extreme heat environments where oxidation, scaling, and erosion pose critical challenges. Engineered for longevity and thermal resilience, these shields are ideal for demanding industrial applications. For specialized configurations, technical guidance, or material selection support, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering

SS 310S Half Round Straight Tube Shield Half Round Tube Shield Ladhani Metal Corporation manufactures SS 310S Half Round Straight Tube Shields designed to protect straight boiler and heat exchanger tubes from high-temperature oxidation, corrosion, and mechanical erosion. SS 310S is a low-carbon version of SS 310, offering enhanced weldability and resistance to sensitization during thermal exposure. These shields are especially suited for harsh environments involving continuous or cyclic high heat, making them ideal for industrial boilers, fired heaters, and heat recovery systems. SS 310S Half Round Straight Tube Shield The SS 310S Half Round Straight Tube Shield is fabricated to tightly fit over straight tube surfaces, offering durable protection in thermal processing units. Its resistance to scaling at temperatures up to 1100°C and excellent mechanical strength under elevated temperatures makes it reliable for shielding heat-affected tubes. With easy installation methods such as tack welding, clamping, or banding, these shields minimize downtime and maintenance in critical operations. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of SS 310S Half Round Straight Tube Shields, offering custom solutions to meet the demanding conditions of thermal power plants, petrochemical facilities, and steam reformers. Material Grade SS 310S – Austenitic stainless steel with low carbon content and superior heat and oxidation resistance. Chemical Composition of SS 310S • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.50% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Applications: Recommended for continuous high-temperature service in aggressive gas environments, especially where welding and corrosion resistance are key. Uses • Shielding straight tubes in superheaters, reheaters, and steam coil systems • Protection against flue gas erosion in waste heat boilers • Heat shielding in fired process heaters and refinery furnaces • Lining straight tube segments in chemical and fertilizer heat exchangers • Defending against scaling and surface degradation in steam reformers Features • Low carbon for better weldability – Prevents sensitization and intergranular corrosion • High resistance to scaling – Maintains integrity under continuous exposure to extreme heat • Durable and long-lasting – Withstands mechanical and thermal fatigue • Available in custom sizes – Fabricated to match exact tube diameters and operating conditions • Quick installation – Compatible with standard weld-on, clamp-on, or banded attachment methods • High service life – Reduces tube wear and lowers maintenance frequency Applications • power generation – Installed on straight boiler tubes in areas with high thermal load and flue gas flow • refineries – Protects tubes in process heaters from oxidation and heat-related damage • petrochemical plants – Used in straight sections of heat exchangers and reformer coils • WHRB systems – Improves durability of tubes in gas turbine exhaust recovery units • fertilizer industry – Extends lifespan of tube sections exposed to acidic and high-temperature gas streams Conclusion The SS 310S Half Round Straight Tube Shield from Ladhani Metal Corporation provides superior protection in high-temperature environments, offering excellent oxidation resistance, long-term structural performance, and easy adaptability. Its low carbon content makes it suitable for welded applications where corrosion resistance must be preserved. Engineered for precision and performance, this shield is a reliable choice for heavy-duty thermal systems. For technical assistance, custom orders, or quotes, contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are essential components used to protect heat exchanger tubes, boiler coils, and superheater assemblies from erosion, scaling, slag buildup, and high-temperature corrosion. Designed with a semi-cylindrical profile, they offer easy installation over straight or curved tube surfaces. These shields play a vital role in increasing service life, reducing tube maintenance, and ensuring the efficient operation of thermal systems across power generation, chemical processing, and petrochemical industries. 1Cr25Ni20Si2 U Type Inner Half Round Tube Shield The 1Cr25Ni20Si2 U Type Inner Half Round Tube Shield is fabricated from a high-temperature resistant chromium-nickel-silicon alloy steel. This grade offers excellent resistance to oxidation, sulfur corrosion, and thermal fatigue, even under prolonged exposure to temperatures above 1000°C. The inner U-type configuration is specifically designed to shield the internal curvature of U-bend tubes, a zone vulnerable to accelerated wear caused by flue gas turbulence, slag impact, and thermal cycling. • Inner U Type Half Round Tube Shield – Designed to cover the inside arc of U-bend tubes, offering protection from erosion, scale formation, and heat stress. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of 1Cr25Ni20Si2 U Type Inner Half Round Tube Shields, providing high-performance protective solutions for extreme temperature and chemically aggressive environments. Chemical Composition of 1Cr25Ni20Si2 – High Temperature Alloy Steel • Carbon (C): ≤ 0.20% • Manganese (Mn): ≤ 1.50% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): 1.80 – 2.50% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Applications: Suited for high-temperature environments with oxidizing, sulfurizing, or carburizing gases. Especially effective in boiler, furnace, and WHRB systems operating under cyclic thermal conditions. Uses • Installed on the inner arc of U-bend tubes in power plant boilers and superheaters exposed to slag and thermal stress • Protects curved tube bends in WHRBs, HRSGs, and reformers subjected to flue gas erosion and oxidation • Applied in heat exchangers and reactors operating in high-temperature and chemically active atmospheres • Used in furnace coils, metallurgical plants, and incinerators for protection from sulfur-laden and high-heat gas streams • Suitable for curved tube coils in petrochemical and process industries where scaling and corrosion are common Features • Excellent oxidation resistance – Performs effectively at continuous service temperatures up to 1100°C • Superior inner arc protection – Covers high-wear zones exposed to heat, slag, and turbulent gas flow • Enhanced thermal fatigue resistance – Designed for use in cyclic heating environments without distortion • Corrosion resistance – Withstands acid gases and sulfur-rich flue gases common in industrial combustion systems • Precision fitment – Fabricated to match specific tube sizes and bend radii for optimal protection and stability • Easy installation – Can be fixed using clamping, tack welding, or banding methods depending on system design Applications • power generation – Shields inner U-bend tubes in superheaters and reheaters from high-temperature erosion • waste heat recovery – Used in WHRBs and HRSGs to protect internal arcs against scaling and oxidation • petrochemical processing – Protects U-bend tubes in reformers and exchangers exposed to acidic gas streams • chemical industry – Ensures long-lasting performance in reactors and thermal processing equipment • metallurgical and furnace systems – Applied where high heat and slag exposure are routine Conclusion The 1Cr25Ni20Si2 U Type Inner Half Round Tube Shield by Ladhani Metal Corporation – manufacturer, supplier, and exporter – provides high-strength, heat-resistant shielding for the internal arcs of U-bend tubes operating in severe industrial environments. Its resistance to oxidation, corrosion, and thermal fatigue makes it a dependable solution for extending equipment life and performance under extreme conditions. For custom sizes, technical support, or pricing inquiries, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are engineered to provide robust protection for boiler, superheater, and heat exchanger tubes against high-temperature erosion, slag deposition, scaling, and corrosive gas exposure. These shields are essential in power plants, petrochemical systems, and high-heat industrial environments where tubes are vulnerable to rapid degradation due to thermal cycling and particulate flow. The half-round design ensures quick installation over curved or straight tube sections without system disassembly. U Type Inner Half Round Tube Shield The U Type Inner Half Round Tube Shield is specially designed to protect the inner curvature of U-bend tubes, which often experiences high levels of turbulence, localized corrosion, and scaling due to gas redirection and mechanical stress. Inner shields are commonly paired with outer shields for full bend protection and are manufactured in a wide range of stainless steel and high-temperature alloy grades, customized to specific environmental and system requirements. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of U Type Inner Half Round Tube Shields in various material grades, offering tailored protection solutions for high-temperature and corrosive conditions across multiple industries. Available Grades • SS 304 – General-use stainless steel with good corrosion and heat resistance • SS 304L – Low-carbon version for improved weldability and reduced carbide precipitation • SS 316 – Molybdenum-added alloy with excellent resistance to pitting and chlorides • SS 316L – Low-carbon alternative for superior corrosion resistance in welded environments • SS 310 – Austenitic high-temperature steel with excellent oxidation resistance • SS 310S – Low-carbon SS 310 for better thermal fatigue performance • SS 410 – Martensitic stainless steel with good strength and abrasion resistance • SS 420 – High-hardness martensitic grade ideal for erosion-prone zones • SS 430 – Ferritic grade for moderate corrosion and oxidation resistance • 1Cr13 – Martensitic stainless steel offering mechanical protection and heat resistance • 1Cr18Ni9Ti – Titanium-stabilized grade offering resistance to intergranular corrosion • Cr23Ni13 – High-temperature alloy with excellent oxidation and scaling resistance • Cr25Ni20 – High-performance grade for extreme thermal and oxidizing conditions • 1Cr25Ni20Si2 – Heat-resistant alloy with silicon for improved scale resistance • 1Cr20Ni14Si2 – Alloy for thermal fatigue protection and oxidizing environments Applications • Inner arc protection in U-bend tubes of boilers, superheaters, and reheaters • Shielding internal curves of tubes in waste heat recovery boilers (WHRBs) and HRSGs • Corrosion and scale defense for inner tube arcs in petrochemical and steam reforming units • Inner surface protection in furnace coils, reformers, and incinerators • Installed in chemical plants and thermal systems prone to turbulent flue gas exposure Features • Focused inner arc protection – Guards the most corrosion- and scale-prone surface of U-bend tubes • Material flexibility – Available in multiple grades for varied thermal, mechanical, and chemical requirements • Excellent thermal resistance – Withstands extreme temperatures depending on material (up to 1150°C+) • Precise fit – Custom-fabricated to match exact tube dimensions and bend radii • Simple installation – Mounted using clamps, stainless bands, or welding techniques • Dual-shield pairing – Can be combined with outer shields for complete U-bend coverage • Long-lasting performance – Enhances tube reliability and reduces maintenance in high-wear zones Applications • power generation – Protects U-bend inner surfaces in superheaters and economizers from flue gas turbulence • petrochemical plants – Shields inside arcs in reformers and heaters exposed to chlorides and acidic gases • waste heat systems – Installed in HRSGs and WHRBs to prevent slag and oxidation on internal bends • chemical industries – Suitable for reactors and high-temperature exchangers handling corrosive media • cement and metallurgy – Used in systems exposed to flame, dust, and oxidizing atmospheres Conclusion The U Type Inner Half Round Tube Shield by Ladhani Metal Corporation – manufacturer, supplier, and exporter – is a precision-engineered solution for protecting the inner arc of U-bend tubes against corrosion, scale formation, and thermal damage. Available in a wide range of stainless steels and high-temperature alloys, these shields provide durable, customizable, and easy-to-install protection for critical components in power, chemical, and thermal processing systems. For custom sizes, technical assistance, or quotations, please contact Ladhani Metal Corporation.