DIN 2633 carbon steel flanges PN 16 are reliable weld neck flanges manufactured in compliance with the DIN 2633 standard. Designed for use in medium-pressure piping systems with a pressure rating of up to 16 bar (232 psi), these flanges are fabricated from high-quality carbon steel, providing dependable mechanical strength and ease of fabrication. They are widely utilized in a range of general industrial and utility applications where corrosion resistance demands are moderate. Ladhani Metal Corporation is a globally trusted manufacturer and supplier of carbon steel flanges, recognized for high-precision production, rigorous quality assurance, and strict adherence to international material and dimensional standards. Every flange is tested to ensure consistent performance, mechanical integrity, and compatibility with a variety of piping systems. Pressure Rating: • PN 16 (16 bar / 232 psi): Suitable for medium-pressure systems requiring strong, cost-effective, and durable connections. Flange Type: • Weld Neck Flanges Featuring an extended tapered hub, weld neck flanges help evenly distribute mechanical stress and ensure secure, vibration-resistant joints, particularly effective in systems subject to bending or thermal expansion. • Flat Face (FF) Flanges Ideal for use with soft gaskets or cast iron components, flat face flanges ensure even gasket compression, reducing the risk of flange warping or over-tightening. Carbon Steel Grades and General Composition: Typical Carbon Steel Grade: ASTM A105 (for forged carbon steel flanges) • Carbon (C): 0.35% max • Manganese (Mn): 0.60 – 1.05% • Phosphorus (P): 0.035% max • Sulfur (S): 0.040% max • Silicon (Si): 0.10 – 0.35% • Iron (Fe): Balance Applications: Carbon steel flanges to DIN 2633 PN 16 are widely applied in environments where corrosion resistance is not the primary concern but where mechanical strength, weldability, and cost-efficiency are essential. Applications of DIN 2633 Carbon Steel Flanges PN 16: • Power Plants Used in steam, water, and air systems for medium-pressure operations. • Water Treatment and Distribution Well-suited for water mains, treatment facilities, and irrigation networks where strength and reliability are critical. • Petrochemical and Refining Industries Employed in non-corrosive process piping, utility lines, and support systems. • HVAC and Fire Protection Systems Ideal for chilled water, fire suppression, and compressed air applications. • General Industrial Manufacturing Used in structural piping systems and mechanical infrastructure with stable temperature and pressure conditions. Key Features: • Manufactured to DIN 2633 specifications • PN 16 pressure rating for medium-duty service • Weld neck configuration provides robust, leak-resistant connections • Cost-effective and easy to fabricate and install • Excellent machinability and weldability • Available in various sizes and configurations • Coating and corrosion protection options available upon request Conclusion: DIN 2633 carbon steel flanges PN 16 from Ladhani Metal Corporation are engineered for dependable performance in standard industrial environments. With proven strength, versatility, and affordability, these flanges are a reliable choice for water, steam, gas, and general utility applications. For detailed technical specifications, custom options, or pricing inquiries, contact Ladhani Metal Corporation today.

DIN 2630 Monel flanges PN 2.5 are precision-engineered weld neck flanges manufactured according to the DIN 2630 standard. These flanges are designed for low-pressure applications up to 2.5 bar (36.25 psi), offering outstanding resistance to corrosion, especially in marine and chemical environments. Fabricated from premium Monel alloys such as Monel 400 and Monel K500, these flanges provide excellent mechanical strength and durability, making them ideal for challenging service conditions in low-pressure piping systems. Ladhani Metal Corporation is a globally recognized manufacturer and supplier of Monel flanges, known for delivering high-quality products with advanced engineering precision. Our DIN 2630 PN 2.5 Monel weld neck flanges are extensively used in industries such as marine, chemical processing, oil and gas, and power generation, where superior corrosion resistance and reliability are essential. Each flange is produced to meet stringent industry standards for safety, performance, and longevity. Pressure Rating: • PN 2.5 (2.5 bar / 36.25 psi): Suitable for low-pressure applications requiring corrosion-resistant materials with excellent mechanical integrity. Flange Type: • Weld Neck Flanges Designed with a long tapered hub to enhance stress distribution and minimize turbulence, providing structural reliability and smooth fluid flow in demanding systems. • Flat Face (FF) Flanges Flat face flanges are ideal for use with cast components or soft gasket materials, ensuring uniform gasket compression in low-pressure environments. Monel Grades and Full Composition: Monel 400 (UNS N04400) • Nickel (Ni): ≥ 63.0% • Copper (Cu): 28.0 – 34.0% • Iron (Fe): 2.0 – 3.0% • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 0.5% • Carbon (C): ≤ 0.3% Applications: Exceptional resistance to seawater, acids, and alkalis. Widely used in marine applications, chemical and hydrocarbon processing, and heat exchangers. Monel K500 (UNS N05500) • Nickel (Ni): ≥ 63.0% • Copper (Cu): 27.0 – 33.0% • Aluminum (Al): 2.3 – 3.15% • Titanium (Ti): 0.35 – 0.85% • Iron (Fe): ≤ 2.0% • Manganese (Mn): ≤ 1.5% • Carbon (C): ≤ 0.25% Applications: Precipitation-hardened alloy offering greater strength and hardness than Monel 400 while retaining excellent corrosion resistance. Used in pump shafts, valves, and marine equipment. Applications of DIN 2630 Monel Flanges PN 2.5: • Marine Industry Ideal for use in seawater piping, heat exchangers, and ballast systems where corrosion resistance is critical. • Chemical Processing Utilized in process piping carrying corrosive chemicals and acidic media under low pressure. • Oil and Gas Industry Suitable for sour gas environments, offshore drilling platforms, and processing equipment exposed to corrosive fluids. • Power Generation Used in cooling and condensate systems where resistance to brine and steam is required. Key Features: • Manufactured in accordance with DIN 2630 standards • PN 2.5 pressure class designed for low-pressure applications • Weld neck design ensures better stress handling and flow performance • Flat face option available for uniform gasket sealing • Made from corrosion-resistant Monel 400 and Monel K500 alloys • High mechanical strength and excellent resistance to marine and chemical corrosion • Custom sizes, specifications, and finishes available upon request Conclusion: DIN 2630 Monel Flanges PN 2.5 from Ladhani Metal Corporation provide an ideal solution for low-pressure systems operating in aggressive and corrosive environments. With superior mechanical strength and outstanding resistance to seawater, acids, and other chemicals, these flanges are a reliable choice for critical applications across various industries. For custom configurations, technical consultation, or pricing details, contact Ladhani Metal Corporation.

DIN 2630 Inconel flanges PN 2.5 are precision-engineered weld neck flanges manufactured according to the DIN 2630 standard. These flanges are designed for low-pressure applications up to 2.5 bar (36.25 psi), providing excellent resistance to high temperature, corrosion, and oxidation in demanding industrial environments. Made from high-performance Inconel alloys such as Inconel 600, Inconel 625, and Inconel 718, these flanges are ideal for use where strength, durability, and resistance to harsh chemicals are required in low-pressure piping systems. Ladhani Metal Corporation is a trusted global supplier and manufacturer of Inconel flanges, known for quality craftsmanship and engineering expertise. Our DIN 2630 PN 2.5 Inconel weld neck flanges are commonly utilized in chemical processing, aerospace, power generation, and marine industries where superior corrosion and heat resistance are essential. We ensure that each flange meets rigorous standards for performance, safety, and reliability. Pressure Rating: • PN 2.5 (2.5 bar / 36.25 psi): Suitable for low-pressure applications requiring specialized material properties for corrosion and heat resistance. Flange Type: • Weld Neck Flanges Designed with a long tapered hub to provide enhanced stress distribution and minimize turbulence, ensuring structural integrity and smooth flow in critical piping systems. • Flat Face (FF) Flanges Flat face flanges offer uniform gasket compression and are suitable for mating with cast components or soft gasket materials in low-pressure systems. Inconel Grades and Full Composition: Inconel 600 (UNS N06600) • Nickel (Ni): 72.0 – 80.0% • Chromium (Cr): 14.0 – 17.0% • Iron (Fe): Balance • Carbon (C): ≤ 0.15% • Manganese (Mn): ≤ 1.0% • Silicon (Si): ≤ 0.5% Applications: Excellent resistance to high-temperature oxidation and corrosion in moderately aggressive environments. Used in furnace components, heat exchangers, and chemical process equipment. Inconel 625 (UNS N06625) • Nickel (Ni): 58.0 – 63.0% • Chromium (Cr): 20.0 – 23.0% • Molybdenum (Mo): 8.0 – 10.0% • Iron (Fe): Balance • Carbon (C): ≤ 0.10% • Niobium (Nb): 3.15 – 4.15% Applications: High strength and exceptional resistance to pitting, crevice corrosion, and stress corrosion cracking. Ideal for marine, chemical, and aerospace applications. Inconel 718 (UNS N07718) • Nickel (Ni): 50.0 – 55.0% • Chromium (Cr): 17.0 – 21.0% • Iron (Fe): Balance • Niobium (Nb): 4.75 – 5.50% • Molybdenum (Mo): 2.80 – 3.30% • Titanium (Ti): 0.65 – 1.15% • Aluminum (Al): 0.20 – 0.80% • Carbon (C): ≤ 0.08% Applications: Precipitation-hardened alloy offering excellent strength, corrosion resistance, and weldability. Widely used in aerospace, nuclear reactors, and high-performance chemical processing equipment. Applications of DIN 2630 Inconel Flanges PN 2.5: • Chemical and Petrochemical Industry Used in piping systems carrying corrosive and high-temperature fluids under low pressure. • Aerospace and Defense Applied in low-pressure fuel and hydraulic lines where heat and corrosion resistance are critical. • Power Generation Ideal for heat exchangers, boilers, and turbine components operating at moderate temperatures and low pressure. • Marine Industry Used in seawater cooling and exhaust systems requiring corrosion-resistant materials. Key Features: • Manufactured as per DIN 2630 standards • PN 2.5 pressure class suitable for low-pressure service • Weld neck design for optimal stress management and flow efficiency • Available in high-performance Inconel alloys 600, 625, and 718 • Flat face option for uniform gasket sealing • Superior corrosion and heat resistance properties • Custom sizes, finishes, and grades available on request Conclusion: DIN 2630 Inconel Flanges PN 2.5 from Ladhani Metal Corporation provide a reliable solution for low-pressure piping systems requiring exceptional corrosion resistance, high strength, and durability. These flanges are engineered to meet the demanding requirements of chemical, aerospace, marine, and power generation industries. For custom specifications, technical support, or pricing information, contact Ladhani Metal Corporation.

DIN 2628 Carbon Steel flanges PN 250 are heavy-duty weld neck flanges manufactured in accordance with the DIN 2628 standard, designed for use in high-pressure systems operating up to 250 bar (3625 psi). These flanges are crafted from robust carbon steel grades, offering excellent mechanical strength, weldability, and cost-efficiency. With high tensile strength and good resistance to wear and fatigue, carbon steel flanges are ideal for structural and pressure-bearing applications in industries where corrosion is not a primary concern or where protective coatings are applied. Ladhani Metal Corporation supplies a comprehensive range of DIN 2628 PN 250 Carbon Steel flanges, engineered for demanding industrial environments. Known for precision machining, quality assurance, and consistent performance, our flanges are widely used in sectors such as oil and gas, power generation, water treatment, construction, and mechanical engineering. These flanges provide a reliable connection in pipeline systems that require durable performance under high pressure and mechanical stress. Pressure Rating: • PN 250 (250 bar / 3625 psi): Designed for high-pressure applications that demand strength, durability, and tight sealing under elevated loads. Flange Type: • Weld Neck Flanges Equipped with a tapered hub that enhances mechanical stability and reduces stress concentration at the weld. Ideal for fluctuating temperatures and high-pressure service. • Flat Face (FF) Flanges Flat face design allows for even gasket compression, reducing the risk of leakage when connected to cast or brittle piping components. Carbon Steel Grades and Composition: Common Grades: ASTM A105, ASTM A350 LF2 ASTM A105 • Carbon (C): ≤ 0.35% • Manganese (Mn): 0.60 – 1.05% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.040% • Silicon (Si): 0.10 – 0.35% Applications: Forged carbon steel used in ambient and high-temperature service. Ideal for valves, fittings, and flanges in oil, gas, and industrial pipelines. ASTM A350 LF2 • Carbon (C): ≤ 0.30% • Manganese (Mn): 0.60 – 1.35% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.040% • Silicon (Si): 0.15 – 0.30% Applications: Low-temperature carbon steel suitable for cryogenic and sub-zero environments. Commonly used in pipeline systems, compressors, and pressure vessels. Applications of DIN 2628 Carbon Steel Flanges PN 250: • Oil and Gas Pipelines Used in high-pressure oil, gas, and petrochemical systems where strength and structural integrity are critical. • Power Generation Applied in steam and thermal power plants, including boiler systems and heat exchangers. • Mechanical and Structural Systems Suitable for heavy-duty machinery, process piping, and structural pipe connections. • Water Treatment and Distribution Utilized in potable water and wastewater infrastructure requiring reliable, high-strength components. • HVAC and Industrial Utilities Installed in heating, ventilation, and compressed air systems operating at elevated pressures. Key Features: • Complies with DIN 2628 standard for high-pressure flange applications • PN 250 rating supports high-load, high-stress operational conditions • Weld neck design for optimal flow and reduced weld stress • Flat face option for even gasket pressure and secure sealing • Available in ASTM A105 and A350 LF2 grades • High mechanical strength and excellent machinability • Cost-effective option for non-corrosive or coated environments • Custom sizes, finishes, and drilling patterns available upon request Conclusion: DIN 2628 Carbon Steel Flanges PN 250 by Ladhani Metal Corporation offer a durable, economical solution for high-pressure systems in a variety of industrial applications. With excellent mechanical strength and versatility, these flanges are engineered to perform reliably in demanding environments where corrosion resistance is secondary to pressure and structural requirements. Contact Ladhani Metal Corporation for specifications, technical assistance, or to request a custom quotation for your project needs.

DIN 2627 Monel flanges PN 400 are high-performance blind flanges crafted for ultra-high-pressure systems where superior corrosion resistance, durability, and structural integrity are critical. Compliant with the DIN 2627 standard, these flanges are specifically designed to close off the ends of pipelines in extreme service environments, including highly corrosive marine atmospheres, acidic and alkaline chemical processes, and high-temperature applications. With a PN 400 rating (400 bar / 5800 psi), these flanges ensure leak-free operation under intense pressure and challenging conditions. Made from Monel alloys—primarily Monel 400 and Monel K500—these flanges are widely utilized in offshore oil rigs, naval applications, chemical processing, and power generation systems. Ladhani Metal Corporation is a global leader in manufacturing and exporting DIN-standard Monel flanges, ensuring compliance with international requirements for pressure containment, corrosion resistance, and metallurgical consistency. Pressure Rating: • PN 400 (400 bar / 5800 psi): Engineered for extremely high-pressure piping systems in critical and hazardous service environments where reliable sealing is essential. Flange Type: • Blind Flanges Solid, non-bored flanges used to seal piping systems or terminate flow paths. Ideal for pressure testing, system isolation, and future expansion. • Flat Face (FF) Flanges Designed with a flat sealing surface for use with full-face gaskets and flat mating components. Ensures uniform load distribution and optimal sealing performance. Monel Grades and Composition: Monel 400 (UNS N04400) • Nickel (Ni): ≥ 63% • Copper (Cu): 28 – 34% • Iron (Fe): ≤ 2.5% • Manganese (Mn): ≤ 2% • Silicon (Si): ≤ 0.5% • Carbon (C): ≤ 0.3% Applications: Outstanding resistance to seawater, hydrofluoric acid, alkalis, and other corrosive media. Widely used in marine equipment, chemical processing, and heat exchangers. Monel K500 (UNS N05500) • Nickel (Ni): ≥ 63% • Copper (Cu): 27 – 33% • Aluminum (Al): 2.3 – 3.15% • Titanium (Ti): 0.35 – 0.85% • Iron (Fe): ≤ 2% • Carbon (C): ≤ 0.25% Applications: Combines the corrosion resistance of Monel 400 with enhanced strength and hardness. Suitable for high-stress components like shafts, valve parts, and pump systems in corrosive environments. Applications of DIN 2627 Monel Flanges PN 400: • Offshore Oil and Gas Platforms Ideal for subsea systems exposed to high salinity, pressure, and corrosive gases such as hydrogen sulfide. • Marine and Shipbuilding Preferred in piping systems, ballast lines, and propulsion equipment exposed to seawater and biofouling agents. • Chemical and Petrochemical Plants Used in process systems handling caustic solutions, hydrofluoric acid, and strong alkalis at elevated pressures. • Heat Exchangers and Condensers Excellent thermal conductivity and corrosion resistance make Monel suitable for harsh thermal cycling conditions. • Nuclear and Power Generation Resilient in high-radiation and chemical-laden environments found in cooling systems and high-pressure steam lines. • Aerospace and Defense Used in fuel and hydraulic lines where strength and resistance to high-pressure corrosive media are critical. Key Features: • Manufactured according to DIN 2627 standards • Rated for PN 400 high-pressure operations • Blind flange design ensures reliable sealing and flow isolation • Flat face configuration for full-face gasket compatibility • Available in Monel 400 and Monel K500 grades • Exceptional resistance to corrosion by seawater, acids, and alkalis • High strength and durability in extreme service environments • Widely used in marine, chemical, nuclear, oil and gas, and aerospace industries • Custom configurations, sizes, and material options available on request Conclusion: DIN 2627 Monel Flanges PN 400 from Ladhani Metal Corporation are engineered for mission-critical applications where long-term durability, corrosion resistance, and high-pressure performance are mandatory. Whether you need protection against seawater, alkalis, or aggressive process chemicals, these flanges provide robust, leak-free service in the harshest operating environments. Contact Ladhani Metal Corporation for expert guidance, custom engineering, and dependable supply of Monel flange solutions tailored to your specific needs

DIN 2576 Carbon Steel Flanges PN 10 are slip-on type flanges manufactured in accordance with the DIN 2576 standard, suitable for piping systems operating under low to moderate pressures. Made from high-quality carbon steel, these flanges offer good mechanical strength and are cost-effective solutions for a wide range of industrial applications where corrosion resistance is not the primary concern. The slip-on design allows easy fitting over the pipe and facilitates welding on both the inner and outer edges, ensuring reliable and leak-proof connections. Ladhani Metal Corporation is a reputed manufacturer and global supplier of carbon steel flanges, delivering components that comply with international quality and dimensional standards. DIN 2576 carbon steel flanges are widely used in general-purpose piping systems across industries such as oil and gas, power generation, HVAC, water treatment, and process industries. Pressure Rating: • PN 10 (10 bar / 145 psi): Suitable for use in low to medium pressure systems with stable operational demands. Flange Types: • Slip-On Flanges These flanges slide over the pipe end and are welded on both sides, allowing for simple installation and strong mechanical joints. • Flat Face (FF) Flanges Designed to mate with flat gaskets and flat surfaces, suitable for systems involving cast iron or non-metallic components. Carbon Steel Grades and Composition: Common Grades: • ASTM A105 (Forged Carbon Steel) • ASTM A516 Grade 70 (Pressure Vessel Quality Steel) • IS 2062 (Structural Carbon Steel) Typical Composition (ASTM A105): • Carbon (C): 0.35% max • Manganese (Mn): 0.60 – 1.05% • Phosphorus (P): 0.035% max • Sulfur (S): 0.040% max • Silicon (Si): 0.10 – 0.35% Applications: DIN 2576 carbon steel flanges are preferred in systems where high strength is required and the risk of corrosion is minimal or controlled through external protection (e.g., coatings or linings). Common applications include: • Oil and Gas Transmission Used in pipelines and flowlines where moderate pressures are involved. • Power Plants Suitable for steam, water, and air systems in thermal and hydroelectric power stations. • Water Treatment and Distribution Employed in clean water and wastewater systems, including pumping stations and storage tanks. • HVAC Systems Utilized in heating, ventilation, and air conditioning ducting and piping. • Chemical and Petrochemical Applied in non-corrosive fluid handling and auxiliary systems. • Structural and Fabrication Works Used in non-pressure retaining structural supports and frames. Key Features: • Manufactured to DIN 2576 standards • PN 10 pressure rating for medium-duty applications • Cost-effective and mechanically strong • Available in a variety of carbon steel grades • Slip-on design offers ease of installation and alignment • Flat face design compatible with flat gaskets and soft materials • Ideal for industrial sectors with controlled or minimal corrosion environments • Custom drilling, dimensions, and surface treatments available Conclusion: DIN 2576 Carbon Steel Flanges PN 10 by Ladhani Metal Corporation offer a practical and economical solution for low to moderate pressure piping systems. With reliable performance, ease of installation, and availability in various carbon steel grades, these flanges are suited for a broad range of applications in power, water, oil and gas, and infrastructure industries. For detailed specifications, material compatibility, or project-based orders, contact Ladhani Metal Corporation today.

DIN 2568 Carbon Steel Flanges PN 64 are robust threaded flanges manufactured from high-strength carbon steel, specifically designed to deliver reliable performance in high-pressure industrial systems. Produced in accordance with DIN 2568 specifications, these flanges offer excellent mechanical strength, thermal conductivity, and impact resistance, making them well-suited for demanding applications in oil and gas, petrochemicals, water treatment, mechanical construction, and power generation. Ladhani Metal Corporation is a trusted manufacturer and exporter of carbon steel flanges, offering products that comply with international quality standards and dimensional tolerances. The threaded design enables quick, weld-free installation and removal, making these flanges ideal for systems requiring ease of maintenance and rapid assembly. Pressure Rating: • PN 64 (64 bar / 928 psi): Engineered to withstand high-pressure environments and thermal variations in critical industrial applications. Flange Types: • Threaded (Screwed) Flanges Enable efficient installation without welding, ideal for systems requiring regular inspection or maintenance. • Raised Face (RF) Flanges Improve gasket sealing by concentrating pressure at the gasket area, ideal for high-pressure applications. • Flat Face (FF) Flanges Used in systems involving flat mating surfaces, particularly with brittle or non-metallic equipment. • Forged Threaded Flanges Provide excellent mechanical properties, dimensional accuracy, and durability under load. • Custom-Machined Flanges Available in various sizes, sealing surfaces, and material grades as per customer requirements. Available Carbon Steel Grades and Composition: 1. ASTM A105 (Forged Carbon Steel) Composition: • Carbon (C): ≤ 0.35% • Manganese (Mn): 0.60 – 1.05% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.040% • Silicon (Si): 0.10 – 0.35% Applications: Widely used in valve, pipe, and fitting assemblies in oil and gas, power, and chemical systems due to its strength, toughness, and weldability. 2. ASTM A350 LF2 (Low-Temperature Carbon Steel) Composition: • Carbon (C): ≤ 0.30% • Manganese (Mn): 0.60 – 1.35% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.040% • Silicon (Si): 0.15 – 0.30% Applications: Ideal for cryogenic and low-temperature pressure systems such as pipelines, storage tanks, and vessel components operating in sub-zero climates. Applications of DIN 2568 Carbon Steel Flanges: • Oil and Gas Industry Utilized in upstream and downstream operations, including high-pressure pipelines, wellheads, and separators. • Power Plants Used in steam, cooling water, and high-pressure boiler systems. • Water and Wastewater Management Suitable for potable water lines, sewage treatment facilities, and utility piping systems. • Petrochemical and Refining Applied in process piping that handles non-aggressive or mildly corrosive fluids. • Mechanical and Structural Installations Common in HVAC systems, pressure vessels, and general mechanical piping networks. Key Features: • Manufactured as per DIN 2568 standard • Rated for PN 64 high-pressure applications • Excellent strength, impact resistance, and thermal conductivity • Threaded connection ensures quick and easy, weld-free assembly • Cost-effective and durable solution for industrial infrastructure • Supplied with test certificates, inspection reports, and full traceability • Compatible with galvanizing, coating, or welding processes as required Conclusion: DIN 2568 Carbon Steel Flanges PN 64 from Ladhani Metal Corporation are engineered for high performance in critical industrial environments. Offering high pressure resistance, mechanical durability, and easy installation, these flanges are an optimal solution for a wide range of piping systems. For custom sizes, material options, or technical consultation, contact Ladhani Metal Corporation today.

DIN 2567 stainless steel flanges are high-quality, corrosion-resistant flanges designed for medium to high-pressure piping systems. Manufactured according to the DIN 2567 standard, these flanges offer reliable, leak-free connections that are suitable for a wide range of industrial applications, particularly in environments requiring superior resistance to rust, corrosion, and extreme temperatures. Their durability and ease of installation make them ideal for systems needing frequent maintenance or modification. Ladhani Metal Corporation is a prominent manufacturer and exporter of stainless steel flanges, offering precisely engineered products with excellent mechanical properties, corrosion resistance, and high-temperature performance. DIN 2567 stainless steel flanges are widely utilized across various industries such as chemical processing, oil & gas, power generation, and water treatment. Flange Types: • Threaded (Screwed) Flanges: These enable fast, non-welded assembly, ideal for systems requiring frequent disassembly and reassembly, such as in maintenance-driven or temporary installations. • Raised Face (RF) Flanges: Designed to enhance gasket sealing by concentrating pressure on a smaller contact area, improving the sealing ability in high-pressure systems. • Flat Face (FF) Flanges: Commonly used with cast iron or non-metallic equipment in lower-to-medium pressure systems, providing a flat sealing surface. • Forged Threaded Flanges: Offer improved strength, impact resistance, and dimensional accuracy, making them suitable for demanding applications. • Custom-Machined Flanges: Tailored to customer-specific requirements, including pressure class, size, and material variant. Available Stainless Steel Grades and Composition: 1. Grade 304 o Carbon (C): ≤ 0.08% o Manganese (Mn): 2.00 – 2.50% o Phosphorus (P): ≤ 0.045% o Sulfur (S): ≤ 0.030% o Silicon (Si): ≤ 1.00% o Chromium (Cr): 18.00 – 20.00% o Nickel (Ni): 8.00 – 10.50% Applications: Widely used in food processing, chemical industries, plumbing, and water treatment systems. The corrosion-resistant properties make it ideal for various industrial and marine environments. 2. Grade 316 o Carbon (C): ≤ 0.08% o Manganese (Mn): 2.00 – 2.50% o Phosphorus (P): ≤ 0.045% o Sulfur (S): ≤ 0.030% o Silicon (Si): ≤ 1.00% o Chromium (Cr): 16.00 – 18.00% o Nickel (Ni): 10.00 – 14.00% o Molybdenum (Mo): 2.00 – 3.00% Applications: Ideal for harsh, high-corrosion environments such as chemical and petrochemical industries, marine applications, and systems requiring resistance to pitting and crevice corrosion. 3. Grade 321 o Carbon (C): ≤ 0.08% o Manganese (Mn): 2.00 – 2.50% o Phosphorus (P): ≤ 0.045% o Sulfur (S): ≤ 0.030% o Silicon (Si): ≤ 1.00% o Chromium (Cr): 17.00 – 19.00% o Nickel (Ni): 9.00 – 12.00% o Titanium (Ti): 5 times the carbon content, minimum of 0.60% Applications: Suitable for high-temperature applications and environments where good oxidation and corrosion resistance are necessary. Often used in applications involving elevated temperatures, such as exhaust systems, heat exchangers, and boilers. Applications of DIN 2567 Stainless Steel Flanges: • Chemical Processing Industry: Used in pipelines, reactors, and pumps for handling corrosive substances. • Oil & Gas Industry: Common in offshore platforms, refineries, and subsea pipelines. • Power Plants: Ideal for steam, gas, and cooling water pipelines where high-temperature resistance is needed. • Water & Wastewater Treatment: Cost-effective and durable for fluid handling, filtration lines, and desalination plants. • Food & Beverage Industry: Hygiene and corrosion resistance make them suitable for food processing and pharmaceutical manufacturing systems. • Marine and Offshore: Excellent for use in saltwater environments and high-humidity areas. Key Features: • Manufactured to DIN 2567 standard with PN 25 and PN 40 pressure ratings • High resistance to corrosion, pitting, and oxidation, even in aggressive environments • Available in a range of stainless steel grades: 304, 316, 321 • Superior mechanical strength and excellent weldability • Easy installation with a threaded design for non-welded assembly Conclusion: DIN 2567 stainless steel flanges PN 25 and PN 40 from Ladhani Metal Corporation provide a reliable, high-performance solution for medium to high-pressure piping systems. With exceptional resistance to corrosion, high temperatures, and mechanical stress, these flanges are engineered to perform in demanding industrial environments. For custom specifications, large orders, or further inquiries, contact Ladhani Metal Corporation today.

DIN 2527 is a German standard for flanges, and it specifies the design, dimensions, and tolerances for blind flanges made of stainless steel 304. These flanges are commonly used in piping systems to seal the end of a pipe, creating a closed-off section. Here’s a detailed description: DIN 2527 Stainless Steel 304 Blind Flanges Material: Stainless Steel 304: This is an austenitic grade of stainless steel known for its excellent corrosion resistance, particularly against atmospheric, chemical, and other harsh environments. Stainless steel 304 is also known for its good weldability, formability, and strength, making it an ideal material for flanges used in a variety of industries, including chemical, food processing, and construction. Design and Dimensions: Shape: Blind flanges are flat, circular plates with no center hole, designed to seal the end of a pipeline or vessel. Bolt Holes: These flanges are designed to match the corresponding pipe flange with holes to align with the bolts that will attach them to other flanged components. The bolt holes are usually equally spaced around the perimeter. Thickness: The thickness of DIN 2527 blind flanges varies depending on the pressure rating and the size of the flange. This thickness is essential for the flange to withstand internal pressure and provide a secure seal. Pressure Rating: These flanges are rated according to pressure classes such as PN 6, PN 10, PN 16, PN 25, etc. The rating determines the maximum pressure the flange can safely handle without failure. Applications: Pipeline Sealing: Primarily used to seal the open end of a pipeline or system to prevent leaks and maintain pressure in a closed system. System Isolation: Used when isolating a section of the system for maintenance or modification, as they allow for the easy disconnection of parts. Pressure Containment: In applications where maintaining pressure is essential, a DIN 2527 blind flange provides a tight seal that can withstand varying levels of internal pressure. Features: Corrosion Resistance: As the flange is made of stainless steel 304, it offers excellent resistance to corrosion, even in moderately acidic or alkaline environments. Temperature Resistance: Stainless steel 304 can withstand high temperatures, making it suitable for use in elevated temperature environments. Durability: Stainless steel 304 has excellent strength and durability, ensuring a long service life with minimal wear or corrosion. Types of Blind Flanges in DIN 2527: Raised Face: The face of the flange is slightly raised to create a better seal when mated with the gasket. Flat Face: The face is level with the rest of the flange surface and is generally used with softer gaskets to create the seal. Ring Type Joint (RTJ): Some blind flanges may also come with a grooved surface designed for use with metallic gaskets that provide a more secure, high-pressure seal. These DIN 2527 stainless steel 304 blind flanges are essential components in many piping systems, offering a reliable, durable, and efficient way to seal and isolate sections of the pipeline.