DIN 2634 carbon steel flanges PN 25 are high-strength weld neck flanges manufactured according to the DIN 2634 standard. Specifically designed for use in high-pressure piping systems operating up to 25 bar (362 psi), these flanges offer excellent mechanical performance and are suitable for a wide range of industrial applications. Manufactured from quality carbon steel, they provide strong, durable, and cost-effective solutions for systems where corrosion resistance requirements are moderate but structural integrity is critical. Ladhani Metal Corporation is a recognized manufacturer and global supplier of carbon steel flanges, known for precision engineering, strict adherence to international standards, and advanced production capabilities. Each flange is subject to comprehensive testing and inspection to ensure reliability and consistent performance under demanding operating conditions. Pressure Rating: • PN 25 (25 bar / 362 psi): Suitable for medium to high-pressure applications where strength and impact resistance are essential. Flange Type: • Weld Neck Flanges Designed with a tapered hub to ensure smooth transition from flange to pipe, weld neck flanges are ideal for systems experiencing frequent thermal cycling, pressure fluctuations, and mechanical stress. • Flat Face (FF) Flanges Recommended for use with gaskets made from soft materials or when connecting to cast iron components, flat face flanges ensure even gasket compression and reliable sealing performance. Carbon Steel Grades and Typical Composition: Carbon Steel (ASTM A105 / C22.8 equivalent) – Forged Carbon Steel • Carbon (C): ≤ 0.35% • Manganese (Mn): 0.60 – 1.05% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.040% • Silicon (Si): 0.10 – 0.35% • Iron (Fe): Balance Applications: Commonly used in oil and gas, petrochemical, water transmission, and power generation industries, especially in applications where high mechanical strength and pressure handling are more critical than corrosion resistance. Applications of DIN 2634 Carbon Steel Flanges PN 25: • Oil and Gas Pipelines Widely used in upstream and downstream systems for fluid transport under high pressure. • Petrochemical and Refining Plants Efficiently handles high-pressure flow systems involving hydrocarbons and steam. • Power Plants and Boiler Systems Suited for high-pressure steam and water lines, offering excellent tensile strength and fatigue resistance. • Water and Wastewater Infrastructure Used in municipal and industrial pipelines requiring cost-effective, robust flange connections. • General Industrial Systems Applicable in a wide range of mechanical systems and processing plants handling non-corrosive or mildly corrosive media. Key Features: • Compliant with DIN 2634 pressure and dimensional standards • PN 25 rating ensures compatibility with high-pressure pipelines • High tensile and yield strength for demanding structural requirements • Weld neck design enhances resistance to vibration and thermal expansion • Cost-effective solution for pressure-bearing connections • Available in standard and custom sizes, surface finishes, and pressure ratings • Heat treatment and coating options available upon request Conclusion: DIN 2634 carbon steel flanges PN 25 from Ladhani Metal Corporation provide a robust and economical solution for high-pressure systems where mechanical performance is essential. Their strength, reliability, and adaptability make them a preferred choice across industries such as oil and gas, power generation, and water infrastructure. For technical specifications, custom configurations, or pricing, contact Ladhani Metal Corporation today.

DIN 2630 carbon steel flanges PN 2.5 are precision-engineered weld neck flanges designed in accordance with the DIN 2630 standard, suitable for low-pressure applications up to 2.5 bar (36.25 psi). Manufactured from high-quality carbon steel grades such as ASTM A105 and A350 LF2, these flanges offer reliable mechanical strength and excellent weldability. Carbon steel flanges are ideal for general-purpose piping systems where toughness, cost-effectiveness, and structural integrity are required in low-pressure environments. Ladhani Metal Corporation is a trusted global manufacturer and supplier of carbon steel flanges, known for delivering quality components built to meet international standards. Our DIN 2630 PN 2.5 carbon steel weld neck flanges are widely used in industries such as oil and gas, water treatment, power generation, and general manufacturing. Every flange is manufactured under stringent quality control to ensure performance, durability, and compliance with customer requirements. Pressure Rating: • PN 2.5 (2.5 bar / 36.25 psi): Designed for low-pressure systems requiring durable, cost-effective materials with high mechanical strength. Flange Type: • Weld Neck Flanges Equipped with a long tapered hub to ensure smooth fluid flow and reduce stress concentration, these flanges are suited for critical applications involving pressure and temperature changes. • Flat Face (FF) Flanges Flat face flanges provide uniform gasket compression, especially when used with cast components or soft gasket materials in low-pressure setups. Carbon Steel Grades and Chemical Composition: ASTM A105 (Forged Carbon Steel) • Carbon (C): ≤ 0.35% • Manganese (Mn): 0.60 – 1.05% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.040% • Silicon (Si): 0.10 – 0.35% Applications: Commonly used in ambient- and high-temperature service in pressure systems. Ideal for general-purpose industrial piping, valve connections, and flanged joints. ASTM A350 LF2 (Low-Temperature Carbon Steel) • Carbon (C): ≤ 0.30% • Manganese (Mn): 0.60 – 1.35% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.040% • Silicon (Si): 0.15 – 0.30% Applications: Designed for low-temperature services where enhanced notch toughness is essential, such as cryogenic and refrigerated systems. Applications of DIN 2630 Carbon Steel Flanges PN 2.5: • Oil and Gas Industry Used in upstream and downstream piping for fluid transport under low-pressure conditions. • Water Treatment Plants Ideal for piping systems handling potable water, wastewater, and industrial effluents. • Power Generation Applied in cooling systems, boilers, and auxiliary piping in thermal and hydroelectric power plants. • General Industrial Use Suitable for manufacturing facilities, mechanical piping, and structural connections. Key Features: • Manufactured as per DIN 2630 standards • PN 2.5 pressure class for low-pressure piping systems • Weld neck design improves mechanical stability and flow characteristics • Flat face option enables consistent sealing with softer gasket materials • High strength, excellent machinability, and cost-efficiency • Available in standard and customized sizes, face types, and surface finishes Conclusion: DIN 2630 Carbon Steel Flanges PN 2.5 from Ladhani Metal Corporation provide a practical and durable solution for low-pressure piping systems across various industries. With strong mechanical properties, reliable performance, and economical pricing, these flanges are ideal for applications requiring consistent quality and weldability. For technical support, custom solutions, or pricing, contact Ladhani Metal Corporation.

DIN 2628 Carbon Steel flanges PN 250 are heavy-duty weld neck flanges manufactured in accordance with the DIN 2628 standard, designed for use in high-pressure systems operating up to 250 bar (3625 psi). These flanges are crafted from robust carbon steel grades, offering excellent mechanical strength, weldability, and cost-efficiency. With high tensile strength and good resistance to wear and fatigue, carbon steel flanges are ideal for structural and pressure-bearing applications in industries where corrosion is not a primary concern or where protective coatings are applied. Ladhani Metal Corporation supplies a comprehensive range of DIN 2628 PN 250 Carbon Steel flanges, engineered for demanding industrial environments. Known for precision machining, quality assurance, and consistent performance, our flanges are widely used in sectors such as oil and gas, power generation, water treatment, construction, and mechanical engineering. These flanges provide a reliable connection in pipeline systems that require durable performance under high pressure and mechanical stress. Pressure Rating: • PN 250 (250 bar / 3625 psi): Designed for high-pressure applications that demand strength, durability, and tight sealing under elevated loads. Flange Type: • Weld Neck Flanges Equipped with a tapered hub that enhances mechanical stability and reduces stress concentration at the weld. Ideal for fluctuating temperatures and high-pressure service. • Flat Face (FF) Flanges Flat face design allows for even gasket compression, reducing the risk of leakage when connected to cast or brittle piping components. Carbon Steel Grades and Composition: Common Grades: ASTM A105, ASTM A350 LF2 ASTM A105 • Carbon (C): ≤ 0.35% • Manganese (Mn): 0.60 – 1.05% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.040% • Silicon (Si): 0.10 – 0.35% Applications: Forged carbon steel used in ambient and high-temperature service. Ideal for valves, fittings, and flanges in oil, gas, and industrial pipelines. ASTM A350 LF2 • Carbon (C): ≤ 0.30% • Manganese (Mn): 0.60 – 1.35% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.040% • Silicon (Si): 0.15 – 0.30% Applications: Low-temperature carbon steel suitable for cryogenic and sub-zero environments. Commonly used in pipeline systems, compressors, and pressure vessels. Applications of DIN 2628 Carbon Steel Flanges PN 250: • Oil and Gas Pipelines Used in high-pressure oil, gas, and petrochemical systems where strength and structural integrity are critical. • Power Generation Applied in steam and thermal power plants, including boiler systems and heat exchangers. • Mechanical and Structural Systems Suitable for heavy-duty machinery, process piping, and structural pipe connections. • Water Treatment and Distribution Utilized in potable water and wastewater infrastructure requiring reliable, high-strength components. • HVAC and Industrial Utilities Installed in heating, ventilation, and compressed air systems operating at elevated pressures. Key Features: • Complies with DIN 2628 standard for high-pressure flange applications • PN 250 rating supports high-load, high-stress operational conditions • Weld neck design for optimal flow and reduced weld stress • Flat face option for even gasket pressure and secure sealing • Available in ASTM A105 and A350 LF2 grades • High mechanical strength and excellent machinability • Cost-effective option for non-corrosive or coated environments • Custom sizes, finishes, and drilling patterns available upon request Conclusion: DIN 2628 Carbon Steel Flanges PN 250 by Ladhani Metal Corporation offer a durable, economical solution for high-pressure systems in a variety of industrial applications. With excellent mechanical strength and versatility, these flanges are engineered to perform reliably in demanding environments where corrosion resistance is secondary to pressure and structural requirements. Contact Ladhani Metal Corporation for specifications, technical assistance, or to request a custom quotation for your project needs.

DIN 2568 Carbon Steel Flanges PN 64 are robust threaded flanges manufactured from high-strength carbon steel, specifically designed to deliver reliable performance in high-pressure industrial systems. Produced in accordance with DIN 2568 specifications, these flanges offer excellent mechanical strength, thermal conductivity, and impact resistance, making them well-suited for demanding applications in oil and gas, petrochemicals, water treatment, mechanical construction, and power generation. Ladhani Metal Corporation is a trusted manufacturer and exporter of carbon steel flanges, offering products that comply with international quality standards and dimensional tolerances. The threaded design enables quick, weld-free installation and removal, making these flanges ideal for systems requiring ease of maintenance and rapid assembly. Pressure Rating: • PN 64 (64 bar / 928 psi): Engineered to withstand high-pressure environments and thermal variations in critical industrial applications. Flange Types: • Threaded (Screwed) Flanges Enable efficient installation without welding, ideal for systems requiring regular inspection or maintenance. • Raised Face (RF) Flanges Improve gasket sealing by concentrating pressure at the gasket area, ideal for high-pressure applications. • Flat Face (FF) Flanges Used in systems involving flat mating surfaces, particularly with brittle or non-metallic equipment. • Forged Threaded Flanges Provide excellent mechanical properties, dimensional accuracy, and durability under load. • Custom-Machined Flanges Available in various sizes, sealing surfaces, and material grades as per customer requirements. Available Carbon Steel Grades and Composition: 1. ASTM A105 (Forged Carbon Steel) Composition: • Carbon (C): ≤ 0.35% • Manganese (Mn): 0.60 – 1.05% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.040% • Silicon (Si): 0.10 – 0.35% Applications: Widely used in valve, pipe, and fitting assemblies in oil and gas, power, and chemical systems due to its strength, toughness, and weldability. 2. ASTM A350 LF2 (Low-Temperature Carbon Steel) Composition: • Carbon (C): ≤ 0.30% • Manganese (Mn): 0.60 – 1.35% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.040% • Silicon (Si): 0.15 – 0.30% Applications: Ideal for cryogenic and low-temperature pressure systems such as pipelines, storage tanks, and vessel components operating in sub-zero climates. Applications of DIN 2568 Carbon Steel Flanges: • Oil and Gas Industry Utilized in upstream and downstream operations, including high-pressure pipelines, wellheads, and separators. • Power Plants Used in steam, cooling water, and high-pressure boiler systems. • Water and Wastewater Management Suitable for potable water lines, sewage treatment facilities, and utility piping systems. • Petrochemical and Refining Applied in process piping that handles non-aggressive or mildly corrosive fluids. • Mechanical and Structural Installations Common in HVAC systems, pressure vessels, and general mechanical piping networks. Key Features: • Manufactured as per DIN 2568 standard • Rated for PN 64 high-pressure applications • Excellent strength, impact resistance, and thermal conductivity • Threaded connection ensures quick and easy, weld-free assembly • Cost-effective and durable solution for industrial infrastructure • Supplied with test certificates, inspection reports, and full traceability • Compatible with galvanizing, coating, or welding processes as required Conclusion: DIN 2568 Carbon Steel Flanges PN 64 from Ladhani Metal Corporation are engineered for high performance in critical industrial environments. Offering high pressure resistance, mechanical durability, and easy installation, these flanges are an optimal solution for a wide range of piping systems. For custom sizes, material options, or technical consultation, contact Ladhani Metal Corporation today.

DIN 2567 duplex flanges PN 25 and PN 40 are high-performance threaded flanges manufactured according to DIN 2567 standards, specifically engineered for applications requiring superior strength, corrosion resistance, and long service life in aggressive environments. These flanges are ideal for medium to high-pressure systems and are widely used in industries such as oil & gas, petrochemicals, marine, and wastewater treatment. Ladhani Metal Corporation is a trusted manufacturer and global supplier of duplex flanges, offering precision-machined components designed to withstand stress, temperature fluctuations, and corrosive operating conditions. The threaded configuration enables quick, weld-free assembly, making them suitable for systems requiring routine inspection or maintenance. Pressure Ratings: • PN 25 (25 bar / 362 psi): Suitable for demanding fluid systems operating under moderate to high pressure. • PN 40 (40 bar / 580 psi): Built to handle high-pressure flow systems and aggressive environments, ensuring safety and durability under load. Flange Types: • Threaded (Screwed) Flanges Allow for easy connection and disassembly without welding; ideal for maintenance-accessible systems. • Raised Face (RF) Flanges Enhances gasket performance by focusing sealing pressure in a smaller contact area. • Flat Face (FF) Flanges Common in systems using brittle or non-metallic materials, especially in low-to-medium pressure operations. • Forged Threaded Flanges Deliver greater mechanical strength and improved dimensional accuracy. • Custom-Machined Flanges Offered in customized sizes, pressure classes, and duplex material grades to meet project-specific needs. Duplex Steel Grades and Composition: 1. Duplex 2205 (UNS S31803 / S32205) o Composition:  Chromium (Cr): 21.0 – 23.0%  Nickel (Ni): 4.5 – 6.5%  Molybdenum (Mo): 2.5 – 3.5%  Manganese (Mn): ≤ 2.0%  Nitrogen (N): 0.14 – 0.20%  Carbon (C): ≤ 0.03%  Silicon (Si): ≤ 1.0%  Iron (Fe): Balance Applications: Used in desalination plants, offshore platforms, heat exchangers, and pressure vessels due to its excellent chloride stress corrosion cracking resistance and high mechanical strength. Applications of DIN 2567 Duplex Flanges: • Oil & Gas Industry: Used in pipeline systems, separators, and subsea manifolds • Chemical and Petrochemical Plants: Withstand aggressive chemical exposure, including acids and chlorides • Desalination and Marine Engineering: Excellent performance in saltwater environments • Power Plants: Durable for use in high-pressure steam and cooling water systems • Wastewater Treatment: Corrosion-resistant in sludge, brine, and industrial effluent pipelines • Pulp and Paper Industry: Withstands acidic environments and mechanical abrasion Key Features: • Manufactured as per DIN 2567 standard • Available with PN 25 and PN 40 pressure ratings • High yield strength and stress corrosion cracking resistance • Superior resistance to pitting, crevice corrosion, and chloride-rich environments • Excellent mechanical and fatigue properties under both static and dynamic loading • Supplied with inspection certificates, testing reports, and full material traceability • Compatible with internal linings, coatings, or passivation treatments Conclusion: DIN 2567 duplex flanges PN 25 and PN 40 from Ladhani Metal Corporation are engineered for tough environments where standard stainless steel may fail. With their excellent strength, corrosion resistance, and long-term reliability, these flanges provide a safe and efficient connection solution for critical industrial systems. For detailed specifications, custom requirements, or bulk inquiries, reach out to Ladhani Metal Corporation today.

DIN 2567 titanium flanges are precision-engineered threaded flanges designed for high-performance, medium-to-high-pressure piping systems. Manufactured according to the DIN 2567 standard, these flanges offer exceptional resistance to corrosion, extreme temperatures, and aggressive media. The threaded design allows for easy, weld-free installation, making them ideal for applications where frequent maintenance or system modifications are required. Ladhani Metal Corporation is a leading manufacturer and exporter of titanium flanges, supplying durable and high-quality components for industries that demand superior corrosion resistance and mechanical strength. DIN 2567 titanium flanges are widely used in marine, chemical, aerospace, and water treatment systems. Pressure Ratings: • PN 25 (25 bar / 362 psi): Suitable for moderate to high-pressure systems handling corrosive fluids or gases. Ideal for chemical, marine, and water treatment applications. • PN 40 (40 bar / 580 psi): Designed for high-pressure, high-performance environments requiring maximum reliability and resistance to mechanical stress. Commonly used in offshore, aerospace, and power generation systems. Flange Types: • Threaded (Screwed) Flanges Quick and convenient for non-welded, removable connections in high-purity or corrosive systems. • Raised Face (RF) Flanges Designed to enhance sealing efficiency by focusing compression on the gasket area. • Flat Face (FF) Flanges Ideal for use with non-metallic or brittle mating materials in low-to-medium pressure environments. • Forged Threaded Flanges Provide enhanced mechanical integrity, dimensional precision, and impact resistance. • Custom-Machined Flanges Available in customer-specified sizes, pressure ratings (PN 25, PN 40), and titanium grades. Titanium Grades and Composition: Grade 2 (Commercially Pure Titanium) Composition: Titanium (Ti): ≥ 98.9% Iron (Fe): ≤ 0.30% Oxygen (O): ≤ 0.25% Carbon (C): ≤ 0.08% Nitrogen (N): ≤ 0.03% Hydrogen (H): ≤ 0.015% Grade 5 (Titanium Alloy – Ti-6Al-4V) Composition: Titanium (Ti): Balance Aluminum (Al): 5.5 – 6.75% Vanadium (V): 3.5 – 4.5% Iron (Fe): ≤ 0.40% Oxygen (O): ≤ 0.20% Carbon (C): ≤ 0.08% Nitrogen (N): ≤ 0.05% Hydrogen (H): ≤ 0.015% Applications of DIN 2567 Titanium Flanges: • Chemical Processing: Resists corrosion from strong acids, solvents, and chlorides • Marine and Offshore Engineering: Performs reliably in saltwater environments and subsea installations • Aerospace and Defense: Used in lightweight, high-strength fuel and hydraulic systems • Power Generation: Handles steam and chemical media in nuclear and thermal power plants • Water & Wastewater Treatment: Ideal for high-purity systems, brine lines, and filtration units • Medical and Pharmaceutical: Suitable for bio-compatible and sterile fluid transport systems Key Features: • Manufactured to DIN 2567 standard • Available in PN 25 and PN 40 pressure ratings • Superior resistance to corrosion, erosion, and chemical attack • Lightweight structure with high tensile strength • Easy installation with threaded connections—no welding required • Suitable for both cryogenic and elevated temperature conditions Conclusion: DIN 2567 titanium flanges PN 25 and PN 40 from Ladhani Metal Corporation are the ideal choice for demanding, corrosion-sensitive environments. Combining strength, lightweight construction, and superior corrosion resistance, these flanges deliver long-lasting performance in critical applications across various industries. For detailed specifications, custom designs, or bulk orders, contact Ladhani Metal Corporation today.

DIN 2567 stainless steel flanges are high-quality, corrosion-resistant flanges designed for medium to high-pressure piping systems. Manufactured according to the DIN 2567 standard, these flanges offer reliable, leak-free connections that are suitable for a wide range of industrial applications, particularly in environments requiring superior resistance to rust, corrosion, and extreme temperatures. Their durability and ease of installation make them ideal for systems needing frequent maintenance or modification. Ladhani Metal Corporation is a prominent manufacturer and exporter of stainless steel flanges, offering precisely engineered products with excellent mechanical properties, corrosion resistance, and high-temperature performance. DIN 2567 stainless steel flanges are widely utilized across various industries such as chemical processing, oil & gas, power generation, and water treatment. Flange Types: • Threaded (Screwed) Flanges: These enable fast, non-welded assembly, ideal for systems requiring frequent disassembly and reassembly, such as in maintenance-driven or temporary installations. • Raised Face (RF) Flanges: Designed to enhance gasket sealing by concentrating pressure on a smaller contact area, improving the sealing ability in high-pressure systems. • Flat Face (FF) Flanges: Commonly used with cast iron or non-metallic equipment in lower-to-medium pressure systems, providing a flat sealing surface. • Forged Threaded Flanges: Offer improved strength, impact resistance, and dimensional accuracy, making them suitable for demanding applications. • Custom-Machined Flanges: Tailored to customer-specific requirements, including pressure class, size, and material variant. Available Stainless Steel Grades and Composition: 1. Grade 304 o Carbon (C): ≤ 0.08% o Manganese (Mn): 2.00 – 2.50% o Phosphorus (P): ≤ 0.045% o Sulfur (S): ≤ 0.030% o Silicon (Si): ≤ 1.00% o Chromium (Cr): 18.00 – 20.00% o Nickel (Ni): 8.00 – 10.50% Applications: Widely used in food processing, chemical industries, plumbing, and water treatment systems. The corrosion-resistant properties make it ideal for various industrial and marine environments. 2. Grade 316 o Carbon (C): ≤ 0.08% o Manganese (Mn): 2.00 – 2.50% o Phosphorus (P): ≤ 0.045% o Sulfur (S): ≤ 0.030% o Silicon (Si): ≤ 1.00% o Chromium (Cr): 16.00 – 18.00% o Nickel (Ni): 10.00 – 14.00% o Molybdenum (Mo): 2.00 – 3.00% Applications: Ideal for harsh, high-corrosion environments such as chemical and petrochemical industries, marine applications, and systems requiring resistance to pitting and crevice corrosion. 3. Grade 321 o Carbon (C): ≤ 0.08% o Manganese (Mn): 2.00 – 2.50% o Phosphorus (P): ≤ 0.045% o Sulfur (S): ≤ 0.030% o Silicon (Si): ≤ 1.00% o Chromium (Cr): 17.00 – 19.00% o Nickel (Ni): 9.00 – 12.00% o Titanium (Ti): 5 times the carbon content, minimum of 0.60% Applications: Suitable for high-temperature applications and environments where good oxidation and corrosion resistance are necessary. Often used in applications involving elevated temperatures, such as exhaust systems, heat exchangers, and boilers. Applications of DIN 2567 Stainless Steel Flanges: • Chemical Processing Industry: Used in pipelines, reactors, and pumps for handling corrosive substances. • Oil & Gas Industry: Common in offshore platforms, refineries, and subsea pipelines. • Power Plants: Ideal for steam, gas, and cooling water pipelines where high-temperature resistance is needed. • Water & Wastewater Treatment: Cost-effective and durable for fluid handling, filtration lines, and desalination plants. • Food & Beverage Industry: Hygiene and corrosion resistance make them suitable for food processing and pharmaceutical manufacturing systems. • Marine and Offshore: Excellent for use in saltwater environments and high-humidity areas. Key Features: • Manufactured to DIN 2567 standard with PN 25 and PN 40 pressure ratings • High resistance to corrosion, pitting, and oxidation, even in aggressive environments • Available in a range of stainless steel grades: 304, 316, 321 • Superior mechanical strength and excellent weldability • Easy installation with a threaded design for non-welded assembly Conclusion: DIN 2567 stainless steel flanges PN 25 and PN 40 from Ladhani Metal Corporation provide a reliable, high-performance solution for medium to high-pressure piping systems. With exceptional resistance to corrosion, high temperatures, and mechanical stress, these flanges are engineered to perform in demanding industrial environments. For custom specifications, large orders, or further inquiries, contact Ladhani Metal Corporation today.

DIN 2566 carbon steel flanges PN 16 are durable and cost-effective threaded flanges designed for medium-pressure piping systems. Manufactured according to DIN 2566 standards, these flanges offer reliable, weld-free connections suitable for a wide range of industrial applications. Their threaded design ensures easy installation and removal, especially in setups requiring frequent maintenance or modifications. Ladhani Metal Corporation is a leading manufacturer and exporter of carbon steel flanges, delivering precision-engineered components with high mechanical strength, toughness, and machinability. DIN 2566 carbon steel flanges are widely used across industries such as oil & gas, power generation, construction, and water treatment. Flange Types: • Threaded (Screwed) Flanges: Enable fast, non-welded assembly—ideal for maintenance-driven or temporary systems. • Raised Face (RF) Flanges: Improve gasket sealing by focusing pressure on a smaller contact area. • Flat Face (FF) Flanges: Commonly used with cast iron or non-metallic equipment in low-to-medium pressure systems. • Forged Threaded Flanges: Provide enhanced strength, impact resistance, and dimensional accuracy. • Custom-Machined Flanges: Made to customer specifications including pressure class, size, or material variant. Available Carbon Steel Grades and Composition: 1. ASTM A105 (Forged Carbon Steel) • Carbon (C): ≤ 0.35% • Manganese (Mn): 0.60 – 1.05% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.040% • Silicon (Si): 0.10 – 0.35% Applications: Used in ambient and high-temperature pressure systems, including pipelines, valves, and pressure vessels. 2. ASTM A350 LF2 (Low-Temperature Carbon Steel) • Designed for increased impact resistance at low temperatures. • Offers good weldability and strength retention in cryogenic or sub-zero conditions. Applications: Ideal for cold weather installations such as gas processing, refrigeration lines, and cryogenic piping systems. Applications of DIN 2566 Carbon Steel Flanges: • Oil & Gas Industry: Used in pipelines, compressor units, and flow control systems • Petrochemical Plants: Handles hydrocarbons and other industrial fluids • Power Plants: Suitable for steam, gas, and cooling water pipelines • Water & Wastewater Treatment: Cost-effective for fluid handling and filtration lines • Structural & Mechanical Systems: Common in HVAC, infrastructure, and general engineering Key Features: • Manufactured to DIN 2566 standard with PN 16 pressure rating • High tensile strength, ductility, and resistance to wear • Economical and versatile for general-purpose applications • Threaded design for quick, weld-free installation • Compatible with coatings and protective treatments • Supplied with test certificates, inspection reports, and full material traceability Conclusion: DIN 2566 carbon steel flanges PN 16 from Ladhani Metal Corporation are a dependable and budget-friendly solution for medium-pressure piping systems. Known for their mechanical strength, reliability, and ease of installation, these flanges are engineered to perform in a wide variety of industrial environments. For detailed specifications, customization, or large-volume orders, contact Ladhani Metal Corporation today.

Ladhani Metal Corporation is a leading manufacturer and exporter of DIN 2565 carbon steel flanges, designed to provide strong, reliable, and cost-effective connections in low-pressure piping systems. Manufactured in accordance with DIN 2565 standards and available in PN 6 pressure rating, these threaded flanges are ideal for non-welded piping setups, especially in maintenance-friendly or temporary installations. Carbon steel flanges offer a combination of durability, toughness, and affordability. Their versatility makes them a widely preferred choice across industries such as oil and gas, construction, power generation, water treatment, and general engineering applications. Flange Types: • Threaded (Screwed) Flanges: Designed for quick assembly without welding, ideal for applications requiring frequent dismantling or modifications. • Raised Face (RF) Flanges: Helps create a tighter seal by concentrating pressure on the gasket, minimizing leakage. • Flat Face (FF) Flanges: Commonly used with cast iron or non-metallic components in low-pressure pipelines. • Forged Threaded Flanges: Forged for superior strength, impact resistance, and dimensional accuracy. • Custom-Machined Flanges: Tailored to meet specific customer requirements in terms of pressure class, dimensions, or material properties. Available Carbon Steel Grades and Composition: 1. ASTM A105 (Forged Carbon Steel) o Carbon (C): ≤ 0.35% o Manganese (Mn): 0.60 – 1.05% o Phosphorus (P): ≤ 0.035% o Sulfur (S): ≤ 0.040% o Silicon (Si): 0.10 – 0.35% Applications: Widely used in pressure systems at ambient and higher temperatures. Suitable for oil & gas pipelines, valves, and pressure vessels. 2. ASTM A350 LF2 (Low Temperature Carbon Steel) o Designed for low-temperature service with added toughness and impact resistance. Applications: Used in cryogenic and sub-zero temperature systems, such as gas processing and cold storage piping. Applications of DIN 2565 Carbon Steel Flanges: • Oil & Gas Industry: Used in pipelines, valve connections, and flow systems. • Petrochemical and Refineries: Suitable for systems transporting hydrocarbons and chemicals. • Power Plants: Applied in steam, gas, and cooling water systems. • Water and Wastewater Treatment: Durable and cost-effective for fluid transport. • Structural and General Engineering: Commonly used in infrastructure, HVAC, and mechanical systems. Key Features: • Manufactured to DIN 2565 standard with PN 6 pressure rating • High mechanical strength with good ductility and toughness • Economical option for general-purpose piping systems • Easily machinable, weldable (if needed), and suitable for coatings • Delivered with test certificates, inspection reports, and material traceability Conclusion: DIN 2565 carbon steel flanges from Ladhani Metal Corporation offer dependable performance and excellent value across a wide range of applications. Known for their strength, versatility, and cost-effectiveness, these flanges are engineered to meet demanding project requirements. With strict quality control and precision manufacturing, our carbon steel flanges deliver consistent results for industrial and commercial systems. For specifications, custom requests, or bulk orders, get in touch with Ladhani Metal Corporation today.