'typically manufactured'

The Outer Half Round 90 Degree Bend Tube Shield is fabricated to precisely match the outer arc of 90° tube bends. Its semi-cylindrical form conforms tightly to the external curve, forming a protective barrier that resists abrasive flow and corrosive attack. These shields are typically used in superheaters, reheaters, waste heat recovery boilers (WHRBs), and HRSGs where return bends are most vulnerable. The shields are manufactured from corrosion-resistant stainless steels and heat-resistant alloys, selected based on temperature ratings and media conditions. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of Outer Half Round 90 Degree Bend Tube Shields, offering standard and custom-engineered designs for a wide variety of boiler and heat recovery applications. Available Material Grades • Stainless Steels: SS 304, 304L, 310, 310S, 316, 316L, 410, 420, 430 • Heat-Resistant Alloys: 1Cr13, 1Cr18Ni9Ti, Cr25Ni20, 1Cr25Ni20Si2, Cr23Ni13, 1Cr20Ni14Si2, Inconel 600, and more Typical Chemical Composition (example – SS 316) • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% • Iron (Fe): Balance Applications: Used in curved tube regions where the external surface is subjected to thermal wear, ash abrasion, and corrosive gases. Uses • Protection of 90-degree U-bends in boiler and superheater tube banks • Return bend shielding in heat exchangers and WHRBs • Safeguarding curved tubes in process heaters, HRSGs, and refinery systems • Applied in thermal, petrochemical, and chemical plant steam systems • Suitable for power generation and heavy industrial boilers Features • Form-fitting design – Precisely matches outer curvature of U-bends for tight, secure installation • Heat and corrosion resistance – Manufactured from materials designed to withstand extreme thermal and chemical environments • Durable protection – Shields critical bend zones from fly ash erosion, soot-blowing wear, and gas impingement • Reduced maintenance – Prolongs tube life and minimizes unplanned outages due to bend failure • Custom-engineered – Fabricated based on user drawings, coil geometry, and tube specifications • Flexible installation – Can be clamped, welded, or banded with minimal disassembly Applications • steam power boilers – Protects outer bend regions from accelerated erosion and high-velocity flue gases • oil and gas refineries – Used in convection section return bends to enhance tube longevity • WHRB and HRSG installations – Shields bend areas exposed to intense ash loading • fertilizer and chemical processing – Ideal for curved coils in high-temperature, corrosive environments • industrial heaters – Ensures safety and long-term performance of curved tube bundles Conclusion The Outer Half Round 90 Degree Bend Tube Shield by Ladhani Metal Corporation – manufacturer, supplier, and exporter – delivers critical protection to return bends in thermal process systems. Designed for curved tube geometry, these shields reduce erosion risk, extend tube service life, and support the reliability of high-performance boilers, reformers, and heat recovery units. For custom sizing, material selection, or technical specifications, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponent

FAILED

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered solutions designed to protect boiler, superheater, and heat exchanger tubes from erosion, scaling, slag buildup, and high-temperature corrosion. These shields are widely used in systems that operate under extreme thermal and mechanical stress, particularly in industries such as power generation, petrochemical processing, and waste heat recovery. The half-round design ensures easy and secure installation over straight or curved tube surfaces, helping to extend service life and reduce operational downtime. SS 304 U Type Inner Half Round Tube Shield The SS 304 U Type Inner Half Round Tube Shield is manufactured from austenitic stainless steel grade 304, which contains chromium and nickel as its primary alloying elements. This grade offers a combination of good corrosion resistance, oxidation resistance, and mechanical strength. The inner U-type configuration is specifically designed to cover the inner arc of U-bend tubes in boilers and heat exchangers, an area that typically experiences accelerated wear due to flue gas turbulence, scaling, and heat stress. • Inner U Type Half Round Tube Shield – Shields the internal curvature of U-bend tubes from corrosion, turbulent flow-induced erosion, and thermal scaling. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of SS 304 U Type Inner Half Round Tube Shields, delivering durable and cost-effective shielding for critical industrial applications. Chemical Composition of SS 304 – Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 11.0% • Iron (Fe): Balance Applications: Ideally suited for clean to mildly corrosive environments, including thermal and chemical plants where moderate oxidation and corrosion resistance is needed under elevated temperatures. Uses • Inner surface protection for U-bend tubes in superheaters and reheaters exposed to turbulent gas flow • Applied in return bends of waste heat recovery boilers (WHRBs) and HRSGs • Installed in curved sections of heat exchangers, steam reformers, and process heaters • Suitable for flue gas ducts, evaporators, and condensers with moderate thermal cycling • Used in chemical and refining systems where steam and mildly acidic gases are present Features • Good corrosion and oxidation resistance – Suitable for a broad range of service conditions • Inner arc coverage – Protects the inner bend area from scaling and erosion caused by turbulent flue gases • Durable performance – Offers dependable protection at temperatures up to 870°C • Precise fit – Fabricated to match the exact bend radius and tube dimensions for a secure installation • Easy mounting – Can be installed using clamps, stainless steel banding, or tack welding • Cost-effective solution – Provides a balance of performance, longevity, and affordability for standard industrial applications Applications • thermal power plants – Used in inner U-bends of superheaters and economizers to minimize scaling and erosion • petrochemical industries – Shields inside tube curves exposed to combustion gases and steam • waste heat systems – Protects internal arcs of curved tubes in WHRBs and HRSGs from slag and heat damage • chemical and refinery plants – Provides resistance against moderate levels of corrosion in return bends • industrial heating systems – Ensures extended tube life in furnaces, heat exchangers, and flue gas systems Conclusion The SS 304 U Type Inner Half Round Tube Shield by Ladhani Metal Corporation – manufacturer, supplier, and exporter – is a practical and reliable solution for protecting the inner arc of U-bend tubes in moderate to high-temperature industrial environments. With its balance of corrosion resistance, mechanical durability, and ease of installation, this shield is ideal for a wide range of power and process industry applications. For technical consultation, custom sizes, or quotations, please contact Ladhani Metal Corporation.

FAILED

What is a Half Round Tube Shield? A Half Round Tube Shield is a specially designed metal cover that fits over the external curvature of tubes or pipes. It is commonly used in boilers, heat exchangers, and various high-temperature piping systems to prevent damage caused by erosion, corrosion, high-velocity gas flow, and thermal fatigue. These shields serve as a first line of defense by absorbing mechanical and chemical wear, thereby significantly extending the life of the underlying tubes. Tube shields are essential in high-stress areas where exposure to combustion gases, ash particles, or high-velocity steam can quickly degrade unprotected surfaces. By preventing direct impact on the base metal, they help reduce operational downtime, lower maintenance costs, and prevent unexpected system failures. In boiler systems, tube shields are especially important to avoid tube thinning and ruptures, ensuring safer and more efficient operation. Product Overview At Ladhani Metal Corporation, we manufacture and supply premium-quality Half Round Tube Shields for a wide range of industrial applications. Our products are known for their dimensional accuracy, durability, and superior resistance to wear and corrosion. Designed for harsh operating environments, our tube shields can be customized in terms of thickness, radius, length, and grade to suit specific operating requirements. Whether you require protection for straight tubes, bends, or special boiler tube configurations, we have a solution tailored for you. Available Grades We manufacture Half Round Tube Shields using high-performance stainless steel and alloy steel grades that are selected based on their mechanical strength, temperature tolerance, and corrosion resistance. Stainless Steel Grades: • SS 304, SS 304L • SS 316, SS 316L • SS 310, SS 310S • SS 410, SS 420, SS 430 Heat-Resistant & Alloy Steel Grades: • 1Cr18Ni9Ti • Cr25Ni20 • 1Cr25Ni20Si2 • Cr23Ni13 • 1Cr20Ni14Si2 • 1Cr13 These materials ensure the shields can withstand aggressive media, thermal cycling, and high-velocity particulate flow without cracking or deforming over time. Types of Half Round Tube Shields We offer various forms of Half Round Tube Shields to match different tube geometries and boiler configurations: • U-Type Half Round Tube Shield Designed to cover both the top and sides of the tube, offering extended protection in U-bend areas where wear is most common. • U-Type Outer Half Round Tube Shield Specifically shaped to shield the outer curvature of U-bend tubes, ideal for areas exposed to direct flame or gas flow. • U-Type Inner Half Round Tube Shield Fits the inner curvature of U-bend tubes to protect against erosion caused by high-velocity media turning around the bend. • Half Round Tube Shield for LTSH Type Custom-made to fit tubes in Low Temperature Super Heater (LTSH) sections, providing protection from ash and flue gases. • Half Round Straight Tube Shield Standard half-round shields used for straight tube sections, offering easy installation and effective protection. • Half Round Tube Shield for R/H Tube Designed for Reheater (R/H) tubes, typically found in high-temperature zones; made from heat-resistant materials. • Half Round Shield for Tube A general-purpose shield suitable for various industrial tubes requiring surface protection. • Half Round Tube Shield for WW Screen Engineered to fit water wall screen tubes, protecting against slagging and high radiant heat. • Half Round Tube Shield for Boiler Tube Specifically designed for boiler applications, these shields reduce wear cau Each type is designed for easy integration into existing boiler or piping systems, whether for repair, reinforcement, or preventive maintenance. Key Features ✔ High Durability – Effectively resists erosion, mechanical abrasion, scaling, and chemical attack ✔ Accurate Half-Round Fit – Custom-formed to ensure close contact and full protection of tube surface ✔ Weld-On or Clip-On Installation – Offers flexibility based on site requirements and installation methods ✔ Custom Sizes Available – Tailored to meet specific pipe diameters, wall thicknesses, and operating conditions ✔ Corrosion & Heat Resistance – Performs reliably under prolonged exposure to high temperatures and corrosive flue gases Conclusion Half Round Tube Shields by Ladhani Metal Corporation provide robust protection for critical tubing in boilers, heat exchangers, and high-temperature piping systems. Manufactured with a focus on performance, longevity, and ease of installation, these shields are a dependable solution for industrial operators aiming to enhance system reliability and reduce unplanned maintenance. 📩 Get in touch with us today for customized solutions, bulk order pricing, or technical consultations tailored to your specific industry requirements.

FAILED

DIN 2634 stainless steel flanges PN 25 are precision-engineered weld neck flanges designed and manufactured in accordance with the DIN 2634 standard. These flanges are suitable for high-pressure pipeline systems operating up to 25 bar (362 psi), providing robust and secure connections for a variety of critical industrial applications. Constructed from high-quality stainless steel grades such as 304, 316, and 321, these flanges offer excellent mechanical properties, enhanced corrosion resistance, and dependable performance in aggressive service conditions. Ladhani Metal Corporation is a globally recognized manufacturer and supplier of stainless steel flanges, known for delivering high-precision products that meet stringent international quality and dimensional standards. Each flange undergoes rigorous testing and quality checks to ensure optimal performance, safety, and longevity under high-pressure conditions. Pressure Rating: • PN 25 (25 bar / 362 psi): Engineered for high-pressure environments requiring reinforced flange connections with reliable resistance to corrosion and mechanical stress. Flange Type: • Weld Neck Flanges Incorporating a long tapered hub, weld neck flanges help maintain pipe alignment, reduce stress concentration at the weld joint, and enable smooth fluid flow with minimal turbulence. • Flat Face (FF) Flanges Ideal for systems utilizing soft gaskets or cast components, flat face flanges promote consistent gasket compression and sealing integrity. Stainless Steel Grades and Typical Composition: Stainless Steel 304 • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 10.5% • Carbon (C): ≤ 0.08% (304), ≤ 0.03% (304L) • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Suitable for general-purpose piping systems in environments with moderate corrosion exposure, including potable water and light-duty process lines. Stainless Steel 316 • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% • Carbon (C): ≤ 0.08% (316), ≤ 0.03% (316L) • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Ideal for systems exposed to chlorides, cleaning agents, or other corrosive substances such as in chemical processing, pharmaceuticals, and marine environments. Stainless Steel 321 • Chromium (Cr): 17.0 – 19.0% • Nickel (Ni): 9.0 – 12.0% • Titanium (Ti): ≥ 5 × C (typically 0.20 – 0.70%) • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Frequently used in high-temperature services such as thermal processing equipment, exhaust systems, and heat exchangers due to its stability against intergranular corrosion. Applications of DIN 2634 Stainless Steel Flanges PN 25: • Chemical Processing Units Handles higher operating pressures in systems transporting acids, alkalis, and solvents. • Marine and Offshore Installations Resistant to pressure fluctuations and saltwater corrosion in offshore piping networks. • Pharmaceutical and Biotech Plants Used in clean process environments where both pressure integrity and corrosion resistance are critical. • Industrial Steam and Thermal Systems Suitable for steam distribution and thermal expansion pipelines operating under high pressure. • Power Generation Facilities Applied in turbine piping, heat recovery systems, and pressurized cooling water circuits. Key Features: • Manufactured to DIN 2634 dimensional and pressure specifications • PN 25 pressure rating supports high-pressure operation • Weld neck design ensures leak-tight, stress-resistant connections • Available in stainless steel grades 304, 316, 321 and their low-carbon variants • Superior resistance to high-temperature corrosion and chemical attack • Long-term mechanical strength and fatigue resistance • Custom sizes, finishes, and pressure ratings available upon request Conclusion: DIN 2634 stainless steel flanges PN 25 from Ladhani Metal Corporation are engineered for high-performance use in high-pressure industrial environments where safety, corrosion resistance, and durability are paramount. These flanges are ideal for chemical, marine, thermal, and high-purity applications requiring strong, leak-resistant, and corrosion-resistant connections. For technical support, customized solutions, or pricing details, contact Ladhani Metal Corporation today.

FAILED

DIN 2633 stainless steel flanges PN 16 are precision-engineered weld neck flanges manufactured in accordance with the DIN 2633 standard. These flanges are designed for higher medium-pressure applications up to 16 bar (232 psi), offering durable and secure connections in a wide range of industrial pipeline systems. Made from high-quality stainless steel grades such as 304, 316, and 321, they offer superior corrosion resistance, mechanical strength, and long-term performance under more demanding operating and environmental conditions. Ladhani Metal Corporation is a leading global manufacturer and supplier of stainless steel flanges, known for consistent product quality, technical precision, and adherence to international standards. Each flange undergoes rigorous inspection to ensure compliance with industry norms and safety guidelines. Pressure Rating: • PN 16 (16 bar / 232 psi): Suitable for medium to high-pressure pipeline systems requiring enhanced joint strength and corrosion protection. Flange Type: • Weld Neck Flanges Designed with a long tapered hub that facilitates proper pipe alignment and reduces stress concentration at the flange base. This ensures smooth flow transitions and minimizes turbulence. • Flat Face (FF) Flanges Flat face configuration promotes uniform gasket compression, making it ideal for systems using soft gasket materials or mating with cast components. Stainless Steel Grades and Full Composition: Stainless Steel 304 • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 10.5% • Carbon (C): ≤ 0.08% (304), ≤ 0.03% (304L) • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Suitable for general-purpose piping systems including potable water, food-grade processing lines, and moderate chemical environments. Stainless Steel 316 • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% • Carbon (C): ≤ 0.08% (316), ≤ 0.03% (316L) • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Suitable for more aggressive environments including chemical processing, marine systems, and equipment exposed to chlorinated solutions or cleaning agents. Stainless Steel 321 • Chromium (Cr): 17.0 – 19.0% • Nickel (Ni): 9.0 – 12.0% • Titanium (Ti): ≥ 5 × C (typically 0.20 – 0.70%) • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Preferred in applications involving elevated temperatures and moderate corrosion exposure, such as exhaust systems, heat exchangers, and food-grade thermal equipment. Applications of DIN 2633 Stainless Steel Flanges PN 16: • Industrial Water Systems Used in pressurized water delivery and treatment systems requiring increased pressure tolerance. • Chemical and Petrochemical Plants Suitable for pipelines transporting reactive or mildly corrosive chemicals. • Marine and Offshore Applications Resistant to saltwater corrosion and pressure variations in marine environments. • Food and Beverage Processing Employed in sanitary and hygienic systems requiring strong, corrosion-resistant joints. • HVAC Systems Used in high-pressure duct and pipe connections for heating, ventilation, and cooling systems. Key Features: • Manufactured in compliance with DIN 2633 standards • PN 16 pressure rating for enhanced medium-pressure service • Weld neck design supports secure, vibration-resistant connections • Offered in stainless steel grades 304, 304L, 316, 316L, and 321 • High resistance to chemical and environmental corrosion • Long-lasting performance under mechanical stress and thermal cycles • Custom dimensions, materials, and finishes available upon request Conclusion: DIN 2633 Stainless Steel Flanges PN 16 from Ladhani Metal Corporation are built for reliability in demanding industrial settings that require higher pressure tolerance and superior corrosion resistance. These weld neck flanges, made from premium stainless steel, are ideal for applications across water treatment, chemical processing, marine installations, and food-grade systems. For custom configurations, technical consultations, or detailed pricing, contact Ladhani Metal Corporation today.

FAILED

DIN 2632 stainless steel flanges PN 10 are precision-engineered weld neck flanges manufactured in accordance with the DIN 2632 standard. These flanges are designed for medium-pressure applications up to 10 bar (145 psi), providing strong, leak-proof connections in a wide range of industrial piping systems. Produced from high-quality stainless steel grades such as 304, 316, and 321, they deliver excellent corrosion resistance, mechanical strength, and durability even under moderately demanding environmental and operational conditions. Ladhani Metal Corporation is a globally recognized manufacturer and supplier of stainless steel flanges, committed to consistent quality and engineering accuracy. Each flange is carefully inspected to meet relevant industry standards and environmental regulations. Pressure Rating: • PN 10 (10 bar / 145 psi): Suitable for medium-pressure pipeline systems requiring robust joint integrity and corrosion resistance. Flange Type: • Weld Neck Flanges Designed with a long tapered hub to provide secure pipe alignment and minimize stress concentrations at the flange base. This ensures smooth flow transitions and reduces turbulence. • Flat Face (FF) Flanges Flat face design facilitates even gasket compression and is ideal for systems using cast components or soft gasket materials. Stainless Steel Grades and Full Composition: Stainless Steel 304 • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 10.5% • Carbon (C): ≤ 0.08% (304), ≤ 0.03% (304L) • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Suitable for general-purpose medium-pressure systems including potable water lines, food-grade applications, and light chemical processing. Stainless Steel 316 • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% • Carbon (C): ≤ 0.08% (316), ≤ 0.03% (316L) • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Provides enhanced corrosion resistance for systems exposed to chlorinated water, cleaning chemicals, and mildly acidic environments. Common in pharmaceutical, marine, and chemical processing pipelines. Stainless Steel 321 • Chromium (Cr): 17.0 – 19.0% • Nickel (Ni): 9.0 – 12.0% • Titanium (Ti): ≥ 5 × C (typically 0.20 – 0.70%) • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Ideal for moderate temperature and corrosion environments, frequently used in exhaust systems, thermal processing, and hygienic food equipment. Applications of DIN 2632 Stainless Steel Flanges PN 10: • Water Supply and Treatment Used in potable water and wastewater systems requiring medium-pressure handling. • Food and Beverage Industry Suitable for hygienic piping systems that operate at moderate pressures and require corrosion resistance. • Chemical Distribution Commonly used in pipelines carrying diluted or mildly aggressive chemicals. • HVAC and Ventilation Applied in duct flanges and connections for air handling and medium-pressure ventilation systems. Key Features: • Manufactured as per DIN 2632 standards • PN 10 pressure rating for medium-pressure service • Weld neck design enhances pipe-flange joint strength • Available in stainless steel grades 304, 304L, 316, 316L, and 321 • Resistant to corrosion with long service life under mechanical and environmental stresses • Suitable for food-grade, chemical, water, and HVAC applications • Custom sizes, finishes, and material grades available on request Conclusion: DIN 2632 Stainless Steel Flanges PN 10 from Ladhani Metal Corporation are engineered to meet the demands of medium-pressure industrial applications where reliability, corrosion resistance, and durability are critical. Manufactured from premium stainless steel materials, these weld neck flanges provide an economical and dependable solution across sectors such as water treatment, food processing, chemical distribution, and HVAC systems. For custom requirements, technical support, or pricing information, contact Ladhani Metal Corporation today

FAILED

DIN 2630 stainless steel flanges PN 2.5 are precision-fabricated weld neck flanges produced in accordance with the DIN 2630 standard. These flanges are engineered for low-pressure applications up to 2.5 bar (36.25 psi), providing reliable and leak-resistant connections in light-duty and non-critical piping systems. Manufactured from premium stainless steel grades including 304, 316, and 321, they offer excellent corrosion resistance, mechanical stability, and longevity even in mildly corrosive or intermittent industrial environments. Ladhani Metal Corporation is a globally trusted manufacturer and supplier of stainless steel flanges, known for delivering consistent quality and engineering precision. Ladhani Metal Corporation ensures each flange meets relevant industrial standards and environmental requirements. Pressure Rating: • PN 2.5 (2.5 bar / 36.25 psi): Suitable for low-pressure pipeline systems that require basic joint integrity and corrosion resistance. Flange Type: • Weld Neck Flanges Designed with a long tapered hub to support pipe alignment and reduce stress at the base of the flange. Ensures steady flow transition with minimal turbulence. • Flat Face (FF) Flanges Flat face design ensures even gasket compression and is preferred in systems using cast components or soft gasket materials. Stainless Steel Grades and Full Composition: Stainless Steel 304 • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 10.5% • Carbon (C): ≤ 0.08% (304), ≤ 0.03% (304L) • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Ideal for general-purpose low-pressure systems including potable water lines, food-grade applications, and non-aggressive chemical piping. Stainless Steel 316 • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% • Carbon (C): ≤ 0.08% (316), ≤ 0.03% (316L) • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Offers higher corrosion resistance for systems handling chlorinated water, cleaning agents, or mildly acidic substances. Common in pharmaceutical and marine-grade piping. Stainless Steel 321 • Chromium (Cr): 17.0 – 19.0% • Nickel (Ni): 9.0 – 12.0% • Titanium (Ti): ≥ 5 × C (typically 0.20 – 0.70%) • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Best suited for moderate temperature and corrosion conditions. Often used in low-pressure exhaust lines, thermal processing, and food-grade heat equipment. Applications of DIN 2630 Stainless Steel Flanges PN 2.5: • Water Supply and Treatment Used in potable and greywater systems requiring low-pressure fluid conveyance. • Food and Beverage Industry Ideal for hygienic piping with low flow rates and non-corrosive media. • Chemical Distribution Used in systems handling diluted or non-aggressive chemicals. • HVAC and Ventilation Suited for duct flanges and connections in air-handling systems. Key Features: • Compliant with DIN 2630 standards • PN 2.5 pressure class for low-pressure service • Weld neck design for improved pipe-flange connection • Available in stainless steel grades 304, 316, and 321 • Flat face configuration for even gasket contact • Corrosion-resistant and long-lasting under mild mechanical loads • Suitable for food-grade, chemical, and HVAC systems • Custom sizes, finishes, and material grades available upon request Conclusion: DIN 2630 Stainless Steel Flanges PN 2.5 from Ladhani Metal Corporation are optimized for low-pressure industrial applications where corrosion resistance, hygiene, and operational simplicity are key. Made from high-grade stainless steel materials, these weld neck flanges offer a reliable, economical solution for various sectors including water distribution, food processing, and light chemical service. For custom dimensions, technical consultation, or pricing details, contact Ladhani Metal Corporation today.

FAILED

DIN 2628 stainless steel flanges PN 250 are precision-engineered weld neck flanges manufactured according to the DIN 2628 standard. Designed for high-pressure applications up to 250 bar (3625 psi), these flanges are essential for maintaining strength and leak-free connections in critical piping systems. Made from premium stainless steel grades such as 304, 316, and 321, these flanges offer exceptional mechanical stability, corrosion resistance, and durability under severe industrial operating conditions. Ladhani Metal Corporation is a leading manufacturer and supplier of stainless steel flanges. Our DIN 2628 PN 250 weld neck flanges are trusted in demanding sectors including oil and gas, chemical plants, marine engineering, energy infrastructure, and high-pressure process systems for their consistent quality and dependable performance. Pressure Rating: • PN 250 (250 bar / 3625 psi): Engineered for high-pressure piping systems requiring superior joint integrity and long-term sealing reliability. Flange Type: • Weld Neck Flanges Designed with a long tapered hub for high-stress applications. These flanges ensure smooth flow transition and minimize turbulence and erosion in the pipe system. • Flat Face (FF) Flanges Flat face design ensures uniform gasket compression and is suitable for systems using cast components or where flange distortion must be avoided. Stainless Steel Grades and Full Composition: Stainless Steel 304 / 304L (UNS S30400 / S30403) • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 10.5% • Carbon (C): ≤ 0.08% (304), ≤ 0.03% (304L) • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Suitable for general-purpose corrosion resistance. Commonly used in food processing, water treatment, and chemical piping. Stainless Steel 316 / 316L (UNS S31600 / S31603) • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% • Carbon (C): ≤ 0.08% (316), ≤ 0.03% (316L) • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Excellent resistance to chloride environments and acidic media. Widely used in marine, pharmaceutical, and chemical process plants. Stainless Steel 321 (UNS S32100) • Chromium (Cr): 17.0 – 19.0% • Nickel (Ni): 9.0 – 12.0% • Titanium (Ti): ≥ 5 × C (typically 0.20 – 0.70%) • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Titanium-stabilized alloy suited for high-temperature service and excellent resistance to intergranular corrosion. Common in thermal processing and aerospace exhaust systems. Applications of DIN 2628 Stainless Steel Flanges PN 250: • Oil and Gas Sector Used in pressure-critical pipelines, wellheads, and refining equipment. • Chemical and Petrochemical Industry Ideal for corrosive chemical service lines and pressurized chemical tanks. • Marine and Offshore Applications Used in seawater systems and high-pressure marine piping. • Energy and Power Generation Applied in steam, boiler, and high-pressure turbine piping systems. Key Features: • Compliant with DIN 2628 standards • PN 250 pressure class for high-pressure service • Weld neck design for optimal stress distribution • Available in stainless steel grades 304, 304L, 316, 316L, and 321 • Flat face option for uniform sealing and flange safety • Corrosion-resistant and robust under mechanical loads • Applicable in aggressive chemical, marine, and high-temperature environments • Custom sizes, materials, and finishes available upon request Conclusion: DIN 2628 Stainless Steel Flanges PN 250 from Ladhani Metal Corporation are engineered for high-pressure operations where integrity, reliability, and corrosion resistance are paramount. Available in a range of stainless steel materials including 304, 316, and 321, these weld neck flanges provide superior sealing and strength across demanding industrial sectors. Contact Ladhani Metal Corporation for custom solutions, technical assistance, or a detailed quotation.

FAILED

DIN 2627 Carbon Steel flanges PN 400 are high-strength blind flanges designed for use in high-pressure applications across a wide range of industrial systems. Manufactured in accordance with the DIN 2627 standard, these flanges are primarily used to isolate piping systems by sealing off the end of a pipeline or vessel opening. The PN 400 pressure rating (400 bar / 5800 psi) ensures reliable performance under intense pressure and mechanical stress. Carbon steel flanges offer excellent tensile strength, impact resistance, and structural integrity, making them a cost-effective solution for systems where corrosion resistance is not the primary concern. Typically used in applications involving water, steam, oil, and gas, DIN 2627 carbon steel blind flanges are well-suited for power plants, refineries, petrochemical facilities, and general industrial systems. Ladhani Metal Corporation is a trusted global manufacturer and exporter of carbon steel flanges, producing components that meet rigorous international standards for material quality, dimensional accuracy, and pressure containment. Pressure Rating: • PN 400 (400 bar / 5800 psi): Suitable for extremely high-pressure systems in industrial pipelines and mechanical installations. Flange Type: • Blind Flanges Solid, non-bored flanges used to terminate flow or provide system isolation. Commonly used for pressure testing, maintenance access, and future expansion. • Flat Face (FF) Flanges Flat sealing surfaces designed for use with full-face gaskets and flat-faced mating flanges. Promotes even bolt loading and effective sealing under high-pressure conditions. Carbon Steel Grades and Composition: ASTM A105 (Forged Carbon Steel) • Carbon (C): ≤ 0.35% • Manganese (Mn): 0.60 – 1.05% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.040% • Silicon (Si): 0.10 – 0.35% Applications: Commonly used for high-temperature and high-pressure systems. Ideal for oil and gas, steam, and hydraulic systems. ASTM A350 LF2 (Low-Temperature Carbon Steel) • Carbon (C): ≤ 0.30% • Manganese (Mn): 0.60 – 1.35% • Silicon (Si): 0.15 – 0.30% • Nickel (Ni): ≤ 1.0% Applications: Suitable for sub-zero temperature services such as cryogenic systems, LNG processing, and cold-weather pipelines. Applications of DIN 2627 Carbon Steel Flanges PN 400: • Oil and Gas Transmission Lines Used in pipeline systems and refineries handling hydrocarbons under high pressure. • Steam and Power Generation Plants Ideal for high-pressure steam lines, condensate systems, and boiler feedwater applications. • Petrochemical and Chemical Industries Suitable for handling neutral and non-aggressive chemical fluids and process gases. • Water Treatment and Pumping Stations Used in high-pressure water systems, including pumping stations, pressure regulators, and testing units. • Heating, Ventilation, and Air Conditioning (HVAC) Employed in high-pressure chilled water and steam systems for industrial facilities. • General Manufacturing and Engineering Systems Reliable for structural piping systems in factories and mechanical installations. Key Features: • Compliant with DIN 2627 specifications • PN 400 pressure rating for ultra-high-pressure systems • Blind flange design allows for system isolation and pressure containment • Flat face design compatible with full-face gaskets and flat mating surfaces • Manufactured from forged carbon steels like ASTM A105 and A350 LF2 • Excellent strength, ductility, and impact resistance • Economical and durable for non-corrosive environments • Widely used across oil and gas, power, chemical, and water treatment sectors • Custom sizes, pressure classes, surface coatings, and face types available upon request Conclusion: DIN 2627 Carbon Steel Flanges PN 400 from Ladhani Metal Corporation are engineered for high-performance applications requiring strength, pressure retention, and reliability in demanding industrial environments. Whether used in power plants, oil pipelines, or steam systems, these flanges provide durable and cost-effective sealing for critical operations. Contact Ladhani Metal Corporation for product specifications, technical support, or custom solutions tailored to your piping system requirements.

FAILED