Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are high-precision protective components designed to shield boiler and heat exchanger tubes from erosion, high-temperature scaling, and aggressive gas flows. Crafted from superior stainless steel alloys, these shields enhance equipment reliability and performance in demanding industrial conditions. SS 310 Half Round Tube Shield The SS 310 Half Round Tube Shield is a semi-circular metallic shield fabricated using premium stainless steel grade 310, known for its outstanding resistance to oxidation, scaling, and corrosion at elevated temperatures. This shield is specifically designed for use in environments involving extreme thermal cycling, aggressive combustion gases, and high mechanical stress. The half-round configuration ensures easy, secure installation over exposed tubes, forming a protective barrier that extends component life and reduces maintenance costs. Chemical Composition of SS 310 – Austenitic Stainless Steel • Carbon (C): ≤ 0.25% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.50% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Uses : • Boiler Tube Protection – Shields boiler tubes from direct exposure to high-temperature flue gases, reducing metal loss due to oxidation and abrasive ash erosion in thermal power plants. • Heat Exchanger Tube Shielding – Provides a protective layer against high-temperature corrosion and flow-induced wear, preserving efficiency and reducing failure risks. • Furnace Tube Safeguarding – Resists flame impingement and scale buildup in industrial furnaces, extending the life of radiant and convection section tubes. • Petrochemical Process Protection – Used in reactors and reformers where exposure to hot process gases and thermal cycling can severely damage unprotected tubes. • Steam Superheater and Reheater Systems – Guards tubes from surface deterioration in high-pressure steam circuits, improving operational longevity and safety. Features : • High-Temperature Resistance – SS 310 maintains structural integrity at temperatures up to 1100°C, ideal for high-heat zones in boilers and furnaces. • Corrosion and Oxidation Resistance – Superior chromium and nickel content ensures excellent resistance to oxidation, scaling, and carburization even under continuous thermal exposure. • Precision Half-Round Design – Ensures a tight, secure fit on existing tube surfaces, enabling quick installation and easy replacement without interrupting system performance. • Custom Fabrication – Available in various thicknesses, lengths, and diameters to suit different tube sizes and geometries, with optional welding or clamping attachments. • Surface Finishing Options – Offered in bright annealed, pickled, or passivated finishes for enhanced appearance and additional surface protection. Applications : • Thermal Power Plants – Protects superheater and economizer tubes from soot erosion, slagging, and thermal stress caused by high-velocity flue gases. • Oil Refineries and Petrochemical Plants – Installed on high-temperature piping and reformer tubes exposed to corrosive gases, thermal cycling, and process variability. • Heat Recovery Steam Generators (HRSGs) – Enhances tube durability in combined-cycle plants where steam tubes face aggressive exhaust gas flow. • Chemical Processing Equipment – Applied in heat exchanger and reactor tubes that handle chemically reactive or acidic compounds at elevated temperatures. • Industrial Steam Boilers – Used in high-pressure steam systems across food, textile, pulp & paper, and marine industries to extend tube life and ensure safe operation. Conclusion The SS 310 Half Round Tube Shield by Ladhani Metal Corporation is a premium solution engineered for the most demanding high-temperature and corrosive environments. Its exceptional resistance to oxidation, scaling, and thermal fatigue makes it ideal for use in power plants, refineries, and process industries where tube protection is critical for safety and efficiency. By extending the life of boiler and heat exchanger tubes, reducing downtime, and minimizing repair costs, these shields offer long-term value and dependable performance. With custom sizing, precision fabrication, and strict quality control, Ladhani Metal Corporation delivers reliable shielding solutions tailored to meet the toughest industrial challenges. For technical inquiries, customization options, or to request a quote, please contact Ladhani Metal Corporation.

DIN 2634 monel flanges PN 25 are high-performance weld neck flanges manufactured in accordance with the DIN 2634 standard. Specifically engineered for high-pressure applications up to 25 bar (362 psi), these flanges are made from premium Monel alloys, offering excellent corrosion resistance, high strength, and durability in harsh environments. Their robust construction makes them ideal for applications involving aggressive chemical media and seawater where conventional metal flanges may degrade. Ladhani Metal Corporation is a trusted global manufacturer and supplier of Monel flanges, known for advanced manufacturing capabilities, precision machining, and strict adherence to international quality standards. Each flange undergoes thorough inspection and testing to ensure long-term reliability, safety, and resistance to extreme operating conditions. Pressure Rating: • PN 25 (25 bar / 362 psi): Designed for high-pressure systems requiring corrosion-resistant and mechanically robust flange connections. Flange Type: • Weld Neck Flanges Featuring an extended tapered hub, weld neck flanges provide excellent stress distribution at the base, ensuring strong and leak-proof joints in systems exposed to high pressure and thermal cycling. • Flat Face (FF) Flanges Ideal for use with softer gasket materials or in systems connecting to cast components, flat face flanges offer consistent and uniform gasket compression. Monel Grades and Typical Composition: Monel 400 (UNS N04400) – Nickel-Copper Alloy • Nickel (Ni): 63% minimum • Copper (Cu): 28-34% • Iron (Fe): 2.5% maximum • Manganese (Mn): 2.0% maximum • Carbon (C): 0.30% maximum Applications: Preferred in seawater and saltwater service, chemical processing, and marine equipment where excellent corrosion resistance in oxidizing and reducing environments is required. Monel K500 (UNS N05500) – Nickel-Copper Alloy with Additional Strengthening Elements • Nickel (Ni): 63% minimum • Copper (Cu): 28-34% • Iron (Fe): 2.5% maximum • Manganese (Mn): 2.0% maximum • Aluminum (Al) and Titanium (Ti): Added for age hardening Applications: Used in high-strength marine and chemical environments requiring enhanced mechanical properties and corrosion resistance. Applications of DIN 2634 Monel Flanges PN 25: • Offshore and Marine Systems Resists corrosion from seawater, brine, and marine atmospheres while maintaining strength under pressure. • Chemical and Petrochemical Processing Ideal for transporting corrosive media such as acids, alkalis, and chloride solutions at elevated pressures. • Desalination Plants Performs reliably in saltwater treatment and high-pressure water processing systems. • Power Generation Used in systems requiring resistance to erosion and corrosion in high-temperature steam and cooling circuits. • Pharmaceutical and Food Processing Applied in hygienic environments requiring corrosion resistance and chemical inertness. Key Features: • Manufactured in accordance with DIN 2634 dimensional and pressure requirements • PN 25 pressure rating supports high-pressure applications • Excellent resistance to corrosion, erosion, and stress corrosion cracking • Weld neck configuration ensures strong, vibration-resistant joints • Available in Monel 400 and Monel K500 alloys • Custom sizes, pressure classes, and surface finishes available upon request Conclusion: DIN 2634 monel flanges PN 25 from Ladhani Metal Corporation are engineered for demanding conditions where corrosion resistance, mechanical strength, and pressure integrity are essential. These Monel flanges provide long-term durability and reliable performance for advanced applications in marine, chemical, power generation, and industrial systems. For technical consultations, specialized requirements, or pricing information, contact Ladhani Metal Corporation today.

DIN 2573 Monel Flanges PN 6 are premium-quality, low-pressure plate flanges crafted from Monel alloys, specifically engineered for systems that operate in highly corrosive and aggressive environments. Manufactured in accordance with DIN 2573 standards, these flanges offer excellent resistance to seawater, acids, and high-temperature conditions, making them an ideal choice for industries such as marine engineering, chemical processing, oil and gas, and power generation. The exceptional properties of Monel alloys ensure durability and reliability in applications requiring strong resistance to pitting, crevice corrosion, and stress corrosion cracking. Ladhani Metal Corporation is a trusted manufacturer and global supplier of Monel alloy flanges, delivering high-quality products that meet rigorous international standards. The DIN 2573 flange design ensures easy installation and provides a secure, leak-free connection, even in low-pressure, harsh environments. Pressure Rating: • PN 6 (6 bar / 87 psi): Designed for low-pressure applications in corrosive and high-temperature environments where Monel’s strength and resistance to corrosion are critical for long-term performance. Flange Types: • Plate Flanges Flat flanges ideal for bolted connections in piping systems where gasket sealing is required, providing secure, leak-free operation in low-pressure systems. • Flat Face (FF) Flanges Used with flat gaskets and mating surfaces, ensuring uniform contact and load distribution, particularly when joining with non-metallic components or cast iron systems. • Slip-On Flanges These flanges slip over the pipe, providing easy alignment and easy-to-weld connections, ideal for low-pressure applications with moderate pressure fluctuations. • Custom-Machined Flanges Tailored to meet specific dimensional and material requirements, available in various sizes, grades, and face finishes to suit the needs of custom applications. Monel Grades and Composition: Monel 400 (UNS N04400) Composition: • Nickel (Ni): 63.0 – 70.0% • Copper (Cu): 28.0 – 34.0% • Iron (Fe): ≤ 2.5% • Manganese (Mn), Silicon (Si), Carbon (C): Trace amounts Applications: Monel 400 is widely used in marine environments, chemical processing, and heat exchangers, where it is subjected to both high temperatures and exposure to saltwater or acids. Its superior resistance to corrosion and oxidation makes it a preferred material in demanding applications like pumps, valves, and marine piping systems. Monel K-500 (UNS N05500) Composition: • Nickel (Ni): 63.0 – 70.0% • Copper (Cu): 27.0 – 33.0% • Aluminum (Al): 2.3 – 3.2% • Titanium (Ti): 0.35 – 0.85% • Iron (Fe): ≤ 2.5% Applications: Monel K-500 offers higher strength and hardness compared to Monel 400, making it suitable for applications in oil and gas extraction, marine industries, and aerospace systems, where both corrosion resistance and high mechanical properties are required. Applications of DIN 2573 Monel Flanges: • Chemical and Petrochemical Plants: Monel flanges are ideal for use in chemical reactors, exchangers, and pipelines handling aggressive chemicals like sulfuric acid, hydrochloric acid, and caustics. • Marine and Offshore Engineering: Highly resistant to seawater corrosion, Monel flanges are used extensively in marine piping systems, offshore oil rigs, and shipbuilding applications where exposure to saltwater and harsh weather conditions is frequent. • Oil and Gas Industry: Monel flanges are often used in production platforms, refineries, and pipelines exposed to brine and acidic substances, offering both strength and resistance to corrosion under high-stress conditions. • Power Generation: Used in systems handling high-temperature steam and corrosive environments, Monel flanges provide reliable service for high-performance power plant components. • Desalination and Water Treatment: With their corrosion resistance to saline environments, Monel flanges are also ideal for seawater desalination plants and water treatment facilities. Key Features: • Manufactured according to DIN 2573 standards • Rated for PN 6 low-pressure systems, with exceptional resistance to corrosion • Outstanding performance in highly corrosive, high-temperature environments • Available in Monel 400, Monel K-500, and other Monel alloys • High strength-to-weight ratio for reliable long-term performance • Suitable for marine, offshore, chemical, and power generation applications • Available with custom drilling, surface finishes, and flange faces Conclusion: DIN 2573 Monel Flanges PN 6 from Ladhani Metal Corporation provide unmatched durability, corrosion resistance, and performance in low-pressure applications exposed to challenging chemical, thermal, and environmental conditions. For custom dimensions, material selections, or technical support, contact Ladhani Metal Corporation today.

DIN 2573 Titanium Flanges PN 6 are lightweight, corrosion-resistant plate flanges manufactured to DIN 2573 standards, specifically designed for low-pressure industrial and chemical applications. Fabricated from premium-grade titanium, these flanges are known for their exceptional strength-to-weight ratio, biocompatibility, and superior corrosion resistance, especially in aggressive environments involving chlorides, seawater, and oxidizing agents. DIN 2573 titanium flanges are ideal for critical applications across industries such as chemical processing, desalination, offshore engineering, medical systems, and aerospace. Ladhani Metal Corporation is a trusted supplier and exporter of precision-engineered titanium flanges, delivering products that meet stringent global quality standards. The DIN 2573 design, combined with the inherent material advantages of titanium, ensures long-lasting performance and ease of integration in low-pressure piping systems. Pressure Rating: • PN 6 (6 bar / 87 psi): Suitable for low-pressure pipelines and systems where outstanding corrosion resistance and long service life are essential, even under chemically aggressive or saline conditions. Flange Types: • Plate Flanges Standard flat flanges designed for bolted connections with gasket sealing, suitable for low-pressure service. • Flat Face (FF) Flanges Ensures full contact with mating flanges or non-metallic components to prevent stress cracking or uneven loading. • Slip-On Flanges Allow for easy alignment and welding, widely used in systems where frequent maintenance or disassembly is required. • Custom-Machined Flanges Available in custom sizes, dimensions, and titanium grades to suit specific project or industry needs. Titanium Grades and Composition: 1. Grade 2 (Commercially Pure Titanium) Composition: • Titanium (Ti): ≥ 99.2% • Iron (Fe): ≤ 0.30% • Oxygen (O): ≤ 0.25% • Carbon (C): ≤ 0.08% • Nitrogen (N): ≤ 0.03% • Hydrogen (H): ≤ 0.015% Applications: Used in desalination plants, chemical handling, marine equipment, and medical fluid systems due to its excellent formability, corrosion resistance, and biocompatibility. 2. Grade 5 (Ti-6Al-4V – Titanium Alloy) Composition: • Titanium (Ti): Balance • Aluminum (Al): 5.5 – 6.75% • Vanadium (V): 3.5 – 4.5% • Iron (Fe): ≤ 0.40% • Oxygen (O): ≤ 0.20% Applications: Preferred in aerospace, high-performance marine, and industrial applications requiring superior mechanical strength, wear resistance, and corrosion protection. Applications of DIN 2573 Titanium Flanges: • Chemical and Petrochemical Plants: Ideal for conveying aggressive acids, chlorides, and alkalis in low-pressure systems. • Desalination and Marine Systems: Exceptional resistance to seawater corrosion makes them suitable for brine, saltwater, and offshore structures. • Medical and Pharmaceutical Equipment: Non-toxic and biocompatible properties support sterile piping systems for fluids and gases. • Aerospace and Defense: Lightweight and high-strength material enhances performance in low-pressure structural and fuel systems. Key Features: • Manufactured according to DIN 2573 specifications • Designed for PN 6 low-pressure applications • Superior corrosion resistance in marine and chemical environments • Lightweight with high structural strength • Suitable for welding, pickling, passivation, and surface customization • Available in Grade 2, Grade 5, and other titanium alloys Conclusion: DIN 2573 Titanium Flanges PN 6 by Ladhani Metal Corporation offer a high-performance, corrosion-resistant solution for low-pressure systems exposed to harsh environments. With excellent mechanical properties and unmatched longevity, these titanium flanges serve critical roles in chemical, marine, medical, and water treatment industries. For detailed specifications, custom sizes, or material selection assistance, contact Ladhani Metal Corporation.

DIN 2569 Monel Flanges PN 100 are precision-engineered welding neck flanges manufactured from high-grade Monel alloys, specifically designed for high-pressure and highly corrosive environments. Built to DIN 2569 standards, these flanges offer excellent resistance to seawater, acids, and alkalis, along with superior mechanical strength and durability. Their robust performance makes them ideal for critical applications in marine engineering, chemical processing, oil and gas, and offshore industries. Ladhani Metal Corporation is a leading manufacturer and exporter of Monel flanges, offering reliable and high-quality products that meet stringent international standards. The welding neck configuration ensures permanent, high-strength connections suitable for continuous operation under high pressure and temperature conditions. Pressure Rating: • PN 100 (100 bar / 1450 psi): Specifically designed for high-pressure systems requiring outstanding corrosion resistance, sealing integrity, and mechanical performance in aggressive and demanding environments. Flange Types: • Welding Neck Flanges Provide high-strength welded connections for pressurized piping systems exposed to thermal expansion and vibration. • Raised Face (RF) Flanges Enhance gasket compression and sealing performance in high-pressure and temperature applications. • Flat Face (FF) Flanges Used in applications with flat mating surfaces, particularly when connecting to brittle or non-metallic materials. • Forged Welding Neck Flanges Offer high mechanical strength, dimensional accuracy, and durability. • Custom-Machined Flanges Available in various sizes, pressure classes, and Monel grades as per customer requirements. Monel Grades and Composition: 1. Monel 400 (Nickel-Copper Alloy) Composition: • Nickel (Ni): ≥ 63.0% • Copper (Cu): 28.0 – 34.0% • Iron (Fe): ≤ 2.5% • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 0.5% • Carbon (C): ≤ 0.30% Applications: Used in marine engineering, chemical processing, and fuel or freshwater tanks due to its excellent resistance to seawater, hydrofluoric acid, and stress corrosion cracking. 2. Monel K500 (Precipitation-Hardened Alloy) Composition: • Nickel (Ni): ≥ 63.0% • Copper (Cu): 27.0 – 33.0% • Aluminum (Al): 2.3 – 3.15% • Titanium (Ti): 0.35 – 0.85% Applications: Ideal for applications requiring high strength and corrosion resistance, such as pump shafts, oil well tools, and marine components. K500 offers greater mechanical strength and hardness compared to Monel 400. Applications of DIN 2569 Monel Flanges: • Marine and Offshore Engineering: Perfect for underwater, saltwater, and coastal applications due to excellent seawater and corrosion resistance. • Chemical and Petrochemical Industries: Used in acid and alkali handling systems, heat exchangers, and reactors where corrosion resistance is crucial. • Oil and Gas Sector: Employed in valves, pipes, and flanges exposed to sour gas and offshore drilling conditions. • Power Generation: Suitable for condenser tubing and heat exchangers in environments where both corrosion and high temperature are factors. • Aerospace and Defense: Used in high-performance components requiring durability, resistance to aggressive chemicals, and thermal stability. Key Features: • Manufactured to DIN 2569 standard • Available in PN 100 pressure rating • Excellent corrosion resistance in acidic and marine environments • High mechanical strength and thermal stability • Permanent welded neck design for secure pipe integration • Supplied with test certifications and complete traceability • Custom machining and finishing available including pickling and passivation Conclusion: DIN 2569 Monel Flanges PN 100 from Ladhani Metal Corporation are engineered for critical operations that demand corrosion resistance, strength, and durability under pressure. These flanges are trusted in marine, chemical, and energy sectors, delivering dependable service in the most challenging environments. For tailored specifications, material consultations, or bulk orders, reach out to Ladhani Metal Corporation today.

Ladhani Metal Corporation is a trusted manufacturer and exporter of DIN 2561 titanium flanges, meticulously engineered for performance in low-pressure piping systems. The DIN 2561 standard outlines specifications for weld neck flanges with a nominal pressure rating of PN6, but we also offer extended options including PN10, PN16, PN25, and PN40 based on customer requirements. Our titanium flanges are crafted using premium-grade titanium alloys, ensuring exceptional corrosion resistance, lightweight strength, and reliability in critical environments such as chemical processing, marine systems, aerospace, and offshore operations. Flange types: • Weld neck flanges: Designed for high-integrity and stress-intensive piping systems • Raised face (RF): Enhances gasket performance and leak-proof sealing • Flat face (FF): Suitable where mating with brittle or non-metallic flange surfaces Grades, chemical composition, and applications: Titanium Grade 2 (UNS R50400) – Commercially Pure Titanium Chemical composition: Titanium (Ti): ≥ 98.90% Iron (Fe): ≤ 0.30% Oxygen (O): ≤ 0.25% Carbon (C): ≤ 0.08% Nitrogen (N): ≤ 0.03% Hydrogen (H): ≤ 0.015% Applications: Ideal for chemical processing, desalination, marine applications, and medical equipment. Excellent resistance to seawater, chlorides, and oxidizing environments. Lightweight and biocompatible, widely used in offshore platforms, heat exchangers, and aerospace structures. Titanium Grade 5 (Ti-6Al-4V, UNS R56400) – Titanium Alloy Chemical composition: Titanium (Ti): Balance Aluminum (Al): 5.5 – 6.75% Vanadium (V): 3.5 – 4.5% Iron (Fe): ≤ 0.40% Oxygen (O): ≤ 0.20% Carbon (C): ≤ 0.08% Nitrogen (N): ≤ 0.05% Hydrogen (H): ≤ 0.015% Applications: Common in high-performance and structural applications including aerospace, automotive, and deep-sea systems. High strength-to-weight ratio, excellent corrosion resistance, and thermal stability make it ideal for demanding engineering environments. Applications of DIN 2561 Titanium Flanges: Marine & Offshore Industries: titanium flanges ideal for offshore drilling rigs, subsea equipment, and desalination plants, ensuring reliable performance in marine environments. Chemical Processing: The superior corrosion resistance of titanium in aggressive chemicals makes it an excellent choice for reactors, pressure vessels, and pipelines used in chemical processing plants. Aerospace & Aviation: Titanium is used in aerospace applications due to its lightweight, high strength, and ability to withstand extreme temperatures. . Power Generation: In nuclear and thermal power plants, where materials must withstand high temperatures and corrosive conditions. Key features: • Manufactured as per DIN 2561 standard • High dimensional accuracy and surface finish • Custom sizes, face types, and drilling options available Conclusion: DIN 2561 titanium flanges from Ladhani Metal Corporation offer reliable, long-lasting performance in aggressive and weight-sensitive environments. With availability in grades like Titanium Grade 2 and Grade 5, these flanges meet international standards and suit a wide range of industrial applications. Our commitment to quality, precision, and customer satisfaction makes our titanium flanges a preferred choice across global industries. For technical details, pricing, or bulk inquiries, contact Ladhani Metal Corporation.

DIN 2545 Inconel flanges are engineered for superior strength, excellent resistance to high temperatures, and remarkable corrosion resistance in extreme environments. Ladhani Metal Corporation provides these high-quality flanges made from Inconel alloys, known for their ability to endure elevated temperatures, oxidation, and corrosive conditions. These flanges are ideal for industries where performance under high-temperature stress and resistance to harsh environments are essential, such as aerospace, chemical processing, power generation, and marine. Types of DIN 2545 Inconel Flanges: Flat Face Flanges (FF) – These flanges have a flat surface that facilitates uniform distribution of the sealing force, making them ideal for low-pressure systems or when a secure seal is required. Raised Face Flanges (RF) – Raised face flanges feature a raised area around the bolt holes, providing enhanced sealing pressure, making them suitable for high-pressure environments. Ring-Type Joint (RTJ) Flanges – Designed with a groove for a metal sealing ring, these flanges are ideal for applications requiring resistance to high pressure and high temperatures. Grades and Chemical Composition: Inconel 600 (UNS N06600) Chemical Composition: Ni: 72%, Cr: 14-17%, Fe: balance, Mn: 1%, Si: 0.5%, C: 0.15% Inconel 600 is known for its excellent resistance to oxidation and corrosion at elevated temperatures. It is widely used in applications like furnace components, chemical processing, and nuclear reactors, offering high strength and good workability. Inconel 625 (UNS N06625) Chemical Composition: Ni: 58%, Cr: 20-23%, Mo: 8-10%, Fe: 5%, Nb: 3.15-4.15%, Ti: 0.4-1% Inconel 625 is a nickel-based alloy that offers superior resistance to high-temperature oxidation and corrosion. It provides exceptional resistance to pitting and crevice corrosion, making it ideal for applications in aerospace, marine, and chemical industries, where high temperatures and corrosive environments are common. Inconel 718 (UNS N07718) Chemical Composition: Ni: 50-55%, Cr: 17-21%, Fe: 0-5%, Mo: 2.8-3.3%, Nb+Ta: 4.75-5.5%, Ti: 0.65-1.15%, Al: 0.2-0.8% Inconel 718 is a high-strength, corrosion-resistant alloy widely used in high-temperature applications. It is designed for use in extreme conditions, offering excellent resistance to oxidation, sulfidation, and high-temperature environments. PN 40 Pressure Rating: The "PN" rating indicates the flange's pressure capacity. PN 40 refers to flanges that are designed to withstand pressures up to 40 bar, making them suitable for high-pressure systems where secure, leak-free connections are essential. Applications: Aerospace Industry: Jet Engines and Turbomachinery: Inconel flanges are commonly used in aerospace applications, including jet engines and turbine systems, where components are exposed to extremely high temperatures and pressures. They provide excellent resistance to heat and corrosion in high-stress environments. Exhaust Systems: Inconel's ability to withstand high temperatures makes it ideal for use in exhaust systems of aircraft engines. 2. Power Generation Industry: Gas Turbines: Inconel flanges are used in gas turbines in power plants, particularly in components that operate at high temperatures, such as turbine blades, combustors, and other critical parts. Nuclear Power Plants: Inconel is used in the construction of components for nuclear reactors, where heat and radiation resistance are crucial. It is used in piping, valves, and other systems exposed to high-temperature nuclear environments. 3. Chemical Processing and Petrochemical Industries: High-Temperature Reactors: Inconel flanges are used in reactors, heat exchangers, and other equipment in the chemical industry that handle aggressive, high-temperature chemical reactions, including those with sulfuric acid, chlorine, and other corrosive substances. Petrochemical Refineries: Inconel is used in systems where high temperatures and reactive chemicals are present, offering superior performance in handling corrosive materials such as acids and hydrocarbons. 4. Oil and Gas Industry: Offshore Platforms: Inconel flanges are widely used in offshore oil and gas platforms, particularly in subsea pipelines, risers, and pressure vessels, where high resistance to both high pressure and corrosion (especially from seawater) is necessary. Wellhead Equipment: Inconel flanges are also used in downhole equipment and wellhead connections that need to resist high-pressure environments and exposure to extreme temperatures. Ladhani Metal Corporation ensures that each Inconel flange is produced to the highest standards of quality and precision, adhering to international specifications. Every flange undergoes thorough testing to meet the required durability and performance standards, providing reliable solutions for critical applications in the most challenging environments. #din2545 #din2545flanges #din2545inconelflanges #flanges #flangessupplier

ladhani metal corporation is supplier and exporter of BS S524 sheet , plate , coil , flat bar , circular plate , plate flanges , farma , laser cutting design sheet , waterjet cutting design sheet.BS S524 is the basic austenitic 18/8 steel stabilised by Titanium or additions. These grades are used because they are not sensitive to intergranular corrosion after heating within the carbide precipitation range of 425-850°C.BS S524 is the grade of choice for applications in the temperature range of up to about 900°C, combining high strength, resistance to scaling and phase stability with resistance to subsequent aqueous corrosion. Cold Bending : It has excellent cold working properties and cold bending can generally be carried out without too much difficulty. Hot Bending : Hot bending should be performed at 950oC - 1100Oc. Corrosion Resistance : it similar resistance to general corrosion in most media as 304, but not as good as 316. Stress Corrosion Cracking : it has similar resistance to stress corrosion cracking as 304, but not as good as 316. Pitting Corrosion / Crevice Corrosion : It has similar resistance to pitting and crevice corrosion as 304, but not as good as 316. Intergranular Corrosion : it has better resistance to intergranular corrosion than most of the standard 300 grades other than the low carbon types 304L, 316L and 317L due to its titanium content.N.B. Forging : Heat uniformly to 1150oC - 1200oC Machining: It is more difficult to machine than most of the standard austenitic stainless steels, due to its titanium addition. Our Domestic reach is unlimited and we supply to this following cities Ahmedabad, Amritsar, Aurangabad, Bangalore, Bhopal, Chandigarh, Chennai, Coimbatore, Dhanbad, Faridabad, Ghaziabad, Guwahati, Gwalior, Howrah, Hyderabad, Indore, Jabalpur, Jaipur, Jodhpur, Kanpur, Kolkata, Kota, Lucknow, Ludhiana, Madurai, Meerut, Mumbai, Nagpur, Nashik, Navi Mumbai, New Delhi, Patna, Pune, Raipur, Rajkot, Ranchi, Solapur, Srinagar, Surat, Thane, Vadodara, Varanasi, Vijayawada, Visakhapatnam, Hubballi, Tiruchirappalli, Bareilly, Moradabad, Mysore, Gurgaon, Aligarh, Jalandhar, Bhubaneswar We export to following Countries: Russia, Canada, United States, China, Brazil, Australia, Argentina, Kazakhstan, Algeria, Denmark, Saudi Arabia, Mexico, Indonesia, Iran, Mongolia, Peru, South Africa, Colombia, Ethiopia, Bolivia, Egypt, Venezuela, Turkey, Chile, Myanmar, France, Ukraine, Madagascar, Botswana, Kenya, Thailand, Spain, Sweden, Uzbekistan, Morocco, Paraguay, Zimbabwe, Norway, Japan, Germany, Republic of the Congo, Finland, Vietnam, Malaysia, Poland, Oman, Italy, Philippines, Ecuador, New Zealand, United Kingdom, Guinea, Uganda, Nepal, Bangladesh.

DIN 2543 Carbon Steel Flanges are flanges made from carbon steel, a widely used material in the manufacturing of flanges for industrial applications. Carbon steel is an alloy made primarily of iron and carbon with small amounts of other elements, offering a combination of strength, durability, and affordability. These flanges conform to the DIN (Deutsches Institut für Normung) standard and are widely used in various industries such as oil and gas, water treatment, power generation, and chemical processing. Material: Typically made from carbon steel alloys such as A105, A350 LF2, and A234 WPB. Pressure Rating (PN16): Rated for 16 bar (approximately 232 psi) at 20°C (68°F), suitable for medium-pressure applications. Key Features of DIN 2543 Carbon Steel Flanges: Strength and Durability: Carbon steel offers high strength and durability, making it suitable for many applications that require high mechanical properties and resistance to wear and tear. Weldability: Carbon steel flanges are weldable and can be easily joined with other carbon steel components using common welding techniques, ensuring strong and durable connections in piping systems. Corrosion Resistance: While carbon steel is more prone to corrosion than stainless steel, it can be protected with coatings, paints, or other surface treatments to provide resistance to environmental elements like water or chemicals. Types of Carbon Steel Flanges (DIN 2543): Weld Neck Flanges (WN): These flanges have a long, tapered neck that is welded to the pipe. They are ideal for high-pressure applications as they provide a stronger, more reliable connection. Slip-On Flanges (SO): Slip-on flanges slide over the pipe and are welded both inside and outside. These are commonly used in medium-pressure systems and are easier to install than weld neck flanges. Blind Flanges (BL): These flanges are used to seal the end of a pipeline, preventing fluid flow. Blind flanges are ideal for systems that need to be closed off for maintenance or future expansion. Socket Weld Flanges (SW): These flanges have a socket into which the pipe is inserted and welded. Typically used for smaller-bore systems, socket weld flanges provide a strong connection that is suitable for high-pressure applications. Lap Joint Flanges (LJ): These flanges are used with a lap joint stub end. They allow for easy alignment and disassembly, making them useful in systems that require frequent maintenance or modification. Common Carbon Steel Grades for DIN 2543 Flanges: A105 (Carbon Steel): Composition: Primarily composed of carbon (0.35% max) and manganese (0.60-0.90%), with trace amounts of phosphorus and sulfur. A350 LF2 (Low-Temperature Carbon Steel): Composition: Contains carbon, manganese, phosphorus, sulfur, and small amounts of other elements like silicon and nickel. A234 WPB (Carbon Steel, Piping Fittings): Composition: Contains carbon, manganese, phosphorus, and sulfur in specific percentages, with a focus on high tensile strength. Pressure Rating (PN16): PN16 refers to the pressure rating of 16 bar (approximately 232 psi) at 20°C (68°F), suitable for medium-pressure system. #flanges #din2543 #din2543flanges #din2543carbonsteel #carbonsteel