Thank you for writing to us. One of our executive will reach back to you through your submitted medium. In case there’s an urgency, feel free to connect over WhatsApp for faster response.
Prefer calling? Dial +919029362692 (International callers) or +919029362692 (Indian callers).
Titanium pipe fittings, including tees, elbows, and reducers, are essential components in the construction and maintenance of piping systems. Known for their superior strength, corrosion resistance, and lightweight properties, titanium fittings are ideal for industries such as aerospace, chemical processing, marine, and power generation.
Titanium Tee Fittings
Titanium tees are used to connect three sections of piping in a T-shaped configuration. This fitting allows for the branching of pipelines in a single direction, offering excellent durability and resistance to harsh environments. With titanium’s high strength-to-weight ratio and resistance to corrosion, these tees ensure reliable flow management in challenging applications.
Titanium Elbow Fittings
Titanium elbows are used to change the direction of fluid flow in a piping system. These fittings come in various angles, including 45°, 90°, and 180°, providing flexibility in routing pipes around obstacles or to specific angles. The lightweight nature of titanium and its high resistance to oxidation and chemical degradation make titanium elbows an optimal choice for systems that operate in high-pressure and corrosive environments.
Titanium Reducer Fittings
Titanium reducers are designed to connect pipes of different diameters, reducing or increasing the flow capacity between sections. Available in concentric or eccentric designs, titanium reducers help in optimizing flow rates while maintaining system integrity. The corrosion-resistant properties of titanium ensure that these reducers maintain their performance even in extreme temperature and pressure conditions.
Advantages of Titanium Pipe Fittings
Corrosion Resistance: Titanium resists a wide range of aggressive chemicals and environmental conditions, including seawater, chlorine, and acidic or alkaline substances.
High Strength-to-Weight Ratio: Titanium fittings offer exceptional strength while remaining lighter than many alternative materials, leading to easier handling and lower transportation costs.
Durability: These fittings are designed for long-lasting performance, even in demanding conditions where other materials might fail.
Biocompatibility: In industries such as medical and aerospace, titanium’s biocompatibility ensures it is safe for specialized applications.
Titanium pipe fittings – tee, elbow, and reducer – provide a combination of strength, flexibility, and durability that enhances the performance of your piping systems.
Product name: ASTM B338 titanium Seamless Tubes for Condensers
Standard:ASTM B338 ASTM B861 ASTM B862
Material:Titanium Gr7
Diameter:5-914mm
Wall thickness:0.5-50mm
Length:Max 16000mm
Surface:Pickling surface/Polished
Type:Seamless, welded
Application:Heat Exchanger, chemical industry etc.
Technique:Rolled
ASTM B338 titanium Seamless Tubes for Condensers
ASTM B338 Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers
ASTM B338 covers 28 grades of seamless and welded titanium alloy tubes for surface condensers, evaporators, and heat exchangers.
Standard
ASTM B338, ASME SB338
Regular Grade
Grade 1 Grade 2
Outer Diameter
12.7mm 15mm 17mm 19mm 25.4mm 31mm etc.
Wall thickness
0.9mm/1.0mm/1.2mm/1.5mm
Length
3000 - 6000mm or other economical lengths
Finish
Polished, AP (Annealed & Pickled), BA (Bright & Annealed), MF
Form
Straight titanium Pipe, Coiled titanium tube
Type
Seamless, ERW, EFW, Welded, Fabricated
End
Plain End, Beveled End, Treaded
Marking
Standard, Grade, OD, Thickness, Length, Heat No. (Or as per customer's request.)
Application
Oil Tube, Gas Tube, Fluid Tube, Boiler and Heat exchanger
Value Added Service
Draw & Expansion as per required Size & Length, Polish (Electro & Commercial) Annealed & Pickled
Bending, Machining Etc.
Test Certificate
Mill Test Certificate EN 10204/3.1,TPI Report, EN10204/3.2
Precautions for titanium pipe processing:
During the deformation process, titanium pipe will gradually reduce wall and diameter with the rotation and feeding of the rolling mill. The pipe size required by the process can be obtained only after 5 ~ 10 rolling and finishing in one rolling pass. The cold rolling pipe mill can carry out large diameter reduction and wall reduction, but the dimensional accuracy is low after rolling, and the pipe end is prone to cracking, uneven concave convex and other phenomena. The cracking phenomenon can be solved mainly by grinding and leveling before pipe blank processing; For the uneven pipe end, similar to the "fish mouth" phenomenon, flat head treatment is required in the subsequent processing process, otherwise it will cause the plug stuffy accident. Therefore, this paper analyzes from the aspects of process, tooling and equipment, in order to find out the causes of uneven concave convex of pipe end and take effective measures to solve it.
Chemical composition (Wt%)
ASTM No.
Fe max
O max
N max
C max
H max
Pd
Al
Bal
Grade 1
0.2
0.18
0.03
0.1
0.015
-
-
Ti
Grade 2
0.3
0.25
0.03
0.1
0.015
-
-
Ti
Physical Properties (Min)
ASTM Grade
Alloy Composition
Tensile Strength
Yield Strength
Elongation min %
ksi
Mpa
ksi
Mpa
Grade 1
Unalloyed Ti ("Pure") 35A -CP1
35
240
25
170
30
Grade 2
Unalloyed Ti ("Pure") 50A -CP2
58
400
40
275
25
Product Name: Titanium Finger Jigs
Material: Gr1, Gr2
Application: Electroplating, anodizing etc.
Size: Customized
Surface: Polished
Plating Jigs or Racks are useful where the output is large and even for distribution of electric current. Other advantage uses are · a good deal of saving in labor, time and ensures speedy loading · increasing productivity · reducing production costs. Jigs are to be used for Electroplating, Electro polishing, Painting and Anodizing. Jigs made of Titanium are to be used for anodizing/ electro polishing. Jigs can be designed, fabricated and insulated according to customers’ requirements.
Product Name: Titanium Fixture
Material: Gr1, Gr2
Application: Electroplating, anodizing, water treatment etc.
Size: Customized
Surface: Polished
Product Information of Titanium Rack for Anodizing
Material: Gr2
Size: Customized
Advantages of Titanium Rack For Anodizing:
Clamps of our racks are stronger than that of the racks you used before.
Customized product is welcomed no matter how complex it is.
Cost-effective
Excellent strength to weight ratio
Excellent corrosion resistance
Easy to load & unload
Chemical composition (Wt%)
ASTM No.
Fe max
O max
N max
C max
H max
Pd
Al
Bal
Grade 2
0.3
0.25
0.03
0.1
0.015
-
-
Ti
Physical Properties (Min)
ASTM Grade
Alloy Composition
Tensile Strength
Yield Strength
Elongation min %
ksi
Mpa
ksi
Mpa
Grade 2
Unalloyed Ti ("Pure") 50A -CP2
58
400
40
275
25
Product Name: Titanium grade 1 elbows
Standard: ASME B16.9
Material: Titanium Gr1
Unit Price: $10usd/pc-$200usd/pc
Outer Diameter: 1/2"-48"
Wall Thickness: Sch5s-Sch160s
Technique: Seamless/Welded
Classification of elbows:
1.Butt welding elbow can be divided into long radius butt welding elbow and short radius butt welding elbow according to its radius of curvature. The radius of curvature of long radius butt welding elbow is equal to 1.5 times the outer diameter of the pipe, i.e. r = 1.5D. The radius of curvature of short radius butt welding elbow is equal to the outer diameter of the pipe, i.e. r = 1D. Where D is the diameter of butt welding elbow and R is the radius of curvature. Unless otherwise specified, 1.5D elbow is generally selected.
2.According to the pressure level, there are: sch5s, sch10s, sch10, sch20, sch30, sch40s, STD, sch40, sch60, sch80s and XS; Sch80、Sch100、Sch120、Sch140、Sch160、XXS
3.According to the angle of elbow, there are 45 degree butt welding elbow, 90 degree butt welding elbow, 180 degree butt welding elbow and other elbows with different angles.
Chemical composition (Wt%)
ASTM No.
Fe max
O max
N max
C max
H max
Pd
Al
Bal
Grade 1
0.2
0.18
0.03
0.1
0.015
-
-
Ti
Physical Properties (Min)
ASTM Grade
Alloy Composition
Tensile Strength
Yield Strength
Elongation min %
ksi
Mpa
ksi
Mpa
Grade 1
Unalloyed Ti ("Pure") 35A -CP1
35
240
25
170
30