Ladhani Metal Corporation offers SS 430 Outer Half Round 90 Degree Bend Tube Shields designed to protect the outer arc of U-bend and 90-degree curved tubes in boilers, heat exchangers, superheaters, and reheaters. Manufactured from ferritic stainless steel grade SS 430, these shields provide good corrosion resistance, excellent formability, and thermal stability in moderately aggressive service environments. SS 430 is particularly suitable for applications where resistance to oxidation and surface scaling is needed without exposure to highly corrosive agents. The semi-cylindrical profile is precision-formed to match the outer curvature of return tube bends, offering a physical barrier against soot-blower impact, flue gas erosion, and ash particle wear. SS 430 shields are commonly used in utility and industrial boilers operating under dry, mildly corrosive, and thermally demanding conditions. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of SS 430 Outer Half Round 90 Degree Bend Tube Shields, offering custom configurations to suit specific plant layouts and service requirements. SS 430 Grade Chemical Composition – Ferritic Stainless Steel • Carbon (C): ≤ 0.12% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): ≤ 0.75% • Iron (Fe): Balance Applications: Ideal for power plants, WHRBs, HRSGs, and general industrial systems requiring protection for tube bends in dry heat and oxidizing environments. Uses • Shielding outer 90-degree bends in superheaters and reheaters • Applied in WHRBs and HRSG return coils exposed to dry flue gas • Protects against moderate erosion and oxidation in utility boilers • Suitable for curved tubes in industrial furnaces and heat recovery units Features • Cost-effective protection – Combines durability with economical material choice • Oxidation resistance – Performs well in clean flue gas and dry heat exposure • Thermal reliability – Withstands repeated heating cycles without deformation • Custom-fit geometry – Formed to match exact bend radius for tight coverage • Versatile installation – Can be clamped, banded, or tack welded as needed • Multiple sizes – Offered in a variety of thicknesses, lengths, and radii Applications • Thermal power stations – Shields steam lines and return bends from surface scaling • Waste heat boilers – Guards tube bends in clean gas recovery systems • Process heaters – Used in less corrosive gas heating environments • Cement and food processing industries – Protects tube curves from oxidation Conclusion The SS 430 Outer Half Round 90 Degree Bend Tube Shield by Ladhani Metal Corporation provides durable and cost-efficient protection for tube bends exposed to dry heat, oxidation, and moderate wear. With good formability and thermal performance, these shields are ideal for systems where corrosion levels are controlled but mechanical shielding is essential. For custom sizing, material selection, or technical specifications, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #halftubeshield #utypehalftubeshield #tubeshieldexporter

The Outer Half Round 90 Degree Bend Tube Shield is fabricated to precisely match the outer arc of 90° tube bends. Its semi-cylindrical form conforms tightly to the external curve, forming a protective barrier that resists abrasive flow and corrosive attack. These shields are typically used in superheaters, reheaters, waste heat recovery boilers (WHRBs), and HRSGs where return bends are most vulnerable. The shields are manufactured from corrosion-resistant stainless steels and heat-resistant alloys, selected based on temperature ratings and media conditions. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of Outer Half Round 90 Degree Bend Tube Shields, offering standard and custom-engineered designs for a wide variety of boiler and heat recovery applications. Available Material Grades • Stainless Steels: SS 304, 304L, 310, 310S, 316, 316L, 410, 420, 430 • Heat-Resistant Alloys: 1Cr13, 1Cr18Ni9Ti, Cr25Ni20, 1Cr25Ni20Si2, Cr23Ni13, 1Cr20Ni14Si2, Inconel 600, and more Typical Chemical Composition (example – SS 316) • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% • Iron (Fe): Balance Applications: Used in curved tube regions where the external surface is subjected to thermal wear, ash abrasion, and corrosive gases. Uses • Protection of 90-degree U-bends in boiler and superheater tube banks • Return bend shielding in heat exchangers and WHRBs • Safeguarding curved tubes in process heaters, HRSGs, and refinery systems • Applied in thermal, petrochemical, and chemical plant steam systems • Suitable for power generation and heavy industrial boilers Features • Form-fitting design – Precisely matches outer curvature of U-bends for tight, secure installation • Heat and corrosion resistance – Manufactured from materials designed to withstand extreme thermal and chemical environments • Durable protection – Shields critical bend zones from fly ash erosion, soot-blowing wear, and gas impingement • Reduced maintenance – Prolongs tube life and minimizes unplanned outages due to bend failure • Custom-engineered – Fabricated based on user drawings, coil geometry, and tube specifications • Flexible installation – Can be clamped, welded, or banded with minimal disassembly Applications • steam power boilers – Protects outer bend regions from accelerated erosion and high-velocity flue gases • oil and gas refineries – Used in convection section return bends to enhance tube longevity • WHRB and HRSG installations – Shields bend areas exposed to intense ash loading • fertilizer and chemical processing – Ideal for curved coils in high-temperature, corrosive environments • industrial heaters – Ensures safety and long-term performance of curved tube bundles Conclusion The Outer Half Round 90 Degree Bend Tube Shield by Ladhani Metal Corporation – manufacturer, supplier, and exporter – delivers critical protection to return bends in thermal process systems. Designed for curved tube geometry, these shields reduce erosion risk, extend tube service life, and support the reliability of high-performance boilers, reformers, and heat recovery units. For custom sizing, material selection, or technical specifications, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponent

SS 310S Half Round Straight Tube Shield Half Round Tube Shield Ladhani Metal Corporation manufactures SS 310S Half Round Straight Tube Shields designed to protect straight boiler and heat exchanger tubes from high-temperature oxidation, corrosion, and mechanical erosion. SS 310S is a low-carbon version of SS 310, offering enhanced weldability and resistance to sensitization during thermal exposure. These shields are especially suited for harsh environments involving continuous or cyclic high heat, making them ideal for industrial boilers, fired heaters, and heat recovery systems. SS 310S Half Round Straight Tube Shield The SS 310S Half Round Straight Tube Shield is fabricated to tightly fit over straight tube surfaces, offering durable protection in thermal processing units. Its resistance to scaling at temperatures up to 1100°C and excellent mechanical strength under elevated temperatures makes it reliable for shielding heat-affected tubes. With easy installation methods such as tack welding, clamping, or banding, these shields minimize downtime and maintenance in critical operations. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of SS 310S Half Round Straight Tube Shields, offering custom solutions to meet the demanding conditions of thermal power plants, petrochemical facilities, and steam reformers. Material Grade SS 310S – Austenitic stainless steel with low carbon content and superior heat and oxidation resistance. Chemical Composition of SS 310S • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.50% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Applications: Recommended for continuous high-temperature service in aggressive gas environments, especially where welding and corrosion resistance are key. Uses • Shielding straight tubes in superheaters, reheaters, and steam coil systems • Protection against flue gas erosion in waste heat boilers • Heat shielding in fired process heaters and refinery furnaces • Lining straight tube segments in chemical and fertilizer heat exchangers • Defending against scaling and surface degradation in steam reformers Features • Low carbon for better weldability – Prevents sensitization and intergranular corrosion • High resistance to scaling – Maintains integrity under continuous exposure to extreme heat • Durable and long-lasting – Withstands mechanical and thermal fatigue • Available in custom sizes – Fabricated to match exact tube diameters and operating conditions • Quick installation – Compatible with standard weld-on, clamp-on, or banded attachment methods • High service life – Reduces tube wear and lowers maintenance frequency Applications • power generation – Installed on straight boiler tubes in areas with high thermal load and flue gas flow • refineries – Protects tubes in process heaters from oxidation and heat-related damage • petrochemical plants – Used in straight sections of heat exchangers and reformer coils • WHRB systems – Improves durability of tubes in gas turbine exhaust recovery units • fertilizer industry – Extends lifespan of tube sections exposed to acidic and high-temperature gas streams Conclusion The SS 310S Half Round Straight Tube Shield from Ladhani Metal Corporation provides superior protection in high-temperature environments, offering excellent oxidation resistance, long-term structural performance, and easy adaptability. Its low carbon content makes it suitable for welded applications where corrosion resistance must be preserved. Engineered for precision and performance, this shield is a reliable choice for heavy-duty thermal systems. For technical assistance, custom orders, or quotes, contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are designed to provide surface protection for boiler tubes, superheaters, and heat exchangers from erosion, slag deposition, and thermal wear. These shields are commonly used in low temperature superheaters (LTSH), economizers, and coil sections in power plants and industrial heating systems. Their half-round profile allows quick installation on exposed tube surfaces, ensuring prolonged tube service life and reduced maintenance frequency. SS 304 Half Round Tube Shield for LTSH Tube The SS 304 Half Round Tube Shield is manufactured from austenitic stainless steel grade 304, which offers excellent corrosion resistance, good mechanical strength, and thermal stability. Designed specifically for LTSH (Low Temperature Super Heater) applications, it protects the exposed surfaces of tubes from low-temperature corrosion, soot erosion, and gas flow damage. The shield is precisely fabricated to match the outer diameter of LTSH tubes, enabling a tight and reliable fit. The Low Temperature Superheater (LTSH) is a section in a boiler where saturated steam from the steam drum is superheated to a moderately higher temperature before entering the high-temperature superheater stages. Positioned in areas with relatively lower flue gas temperatures, the LTSH helps improve thermal efficiency and reduces moisture content in steam. Due to constant exposure to abrasive flue gases and ash, LTSH tubes are prone to wear and require protective shielding, such as half round tube shields, to extend service life. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of SS 304 Half Round Tube Shields for LTSH applications, delivering durable and performance-oriented shielding solutions for thermal power and industrial process systems. Chemical Composition of SS 304 – Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 10.5% • Iron (Fe): Balance Applications: Ideal for low-temperature zones in superheaters, economizers, and other heat exchange systems exposed to gas flow, corrosion, and mild scaling. Uses • Installed on LTSH tubes in power plant boilers to protect from low-temperature flue gas corrosion • Shields exposed tube sections in economizers, air preheaters, and convection coil banks • Used in heat exchangers and process heaters operating in mildly corrosive and low thermal environments • Suitable for protection in industrial boilers and steam generation systems • Applied in thermal units where soot, slag, or flue gas turbulence causes mechanical surface wear Features • Excellent corrosion resistance – Resists oxidation, acidic gas exposure, and low-temperature fouling • Custom fit – Fabricated to match the exact diameter and length of LTSH tubes • Easy installation – Can be mounted using clamp-on, tack welding, or banding methods • Moderate thermal stability – Maintains structural integrity in low to moderate heat zones • Reduces maintenance – Prevents erosion and pitting, extending tube service life • Available in various lengths, wall thicknesses, and radii as per system specifications Applications • thermal power plants – Installed on LTSH tube banks to guard against flue gas corrosion and surface damage • industrial steam systems – Shields exposed superheater and reheater tube sections • waste heat recovery – Used in lower temperature zones of WHRBs and HRSGs • chemical plants – Provides surface protection in convection and heating coils exposed to process gases • boiler maintenance – Ideal for tube protection during retrofits, upgrades, or preventive maintenance Conclusion The SS 304 Half Round Tube Shield for LTSH Tube by Ladhani Metal Corporation – manufacturer, supplier, and exporter – offers dependable and corrosion-resistant protection for tubes in low-temperature superheater applications. With excellent mechanical and chemical performance, this shield ensures efficient operation and extended tube life in a wide range of thermal and industrial systems. For custom dimensions, technical support, or pricing, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are specially engineered to protect boiler, superheater, and heat exchanger tubes from surface wear, high-temperature scaling, flue gas erosion, and slag buildup. These shields are widely used in thermal power plants, waste heat recovery systems, and high-temperature industrial processes. Designed in a half-round profile, they ensure secure and easy installation over curved or straight tubes, extending tube service life and reducing maintenance interruptions. Cr23Ni13 U Type Outer Half Round Tube Shield The Cr23Ni13 U Type Outer Half Round Tube Shield is manufactured from a high-alloy austenitic stainless steel containing approximately 23% chromium and 13% nickel. This alloy provides superior resistance to oxidation, high-temperature corrosion, and thermal fatigue. The outer U-type shield is designed to protect the external curvature of U-bend tubes, which are often exposed to the harshest operating conditions—such as direct flame impingement, slag attack, and aggressive flue gas streams. • Outer U Type Half Round Tube Shield – Offers targeted protection for the outer arc of U-bend tubes, shielding against intense heat, slag erosion, and high-velocity gas flow. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of Cr23Ni13 U Type Outer Half Round Tube Shields, offering durable, high-performance solutions for critical thermal and chemical environments. Chemical Composition of Cr23Ni13 – High-Alloy Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 1.50% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.50% • Chromium (Cr): 22.0 – 24.0% • Nickel (Ni): 12.0 – 14.0% • Iron (Fe): Balance Applications: Ideal for high-temperature, oxidizing, and corrosive environments requiring strong thermal stability, scale resistance, and long-term tube protection. Uses • Shielding U-bend outer arcs in superheaters and reheaters exposed to direct flame and thermal cycling • Protection of return bends in waste heat recovery boilers (WHRBs) and heat recovery steam generators (HRSGs) • Coverage for high-temperature bends in petrochemical process heaters and cracking units • Applied in radiant coils and furnace tubes operating under oxidizing and high-velocity gas environments • Suitable for metallurgical, cement, and gas processing industries with extreme thermal conditions Features • Excellent oxidation and corrosion resistance – High chromium and nickel content ensures scale resistance in aggressive atmospheres • High thermal stability – Performs reliably at temperatures exceeding 1100°C, with resistance to thermal fatigue and distortion • Outer bend protection – Specifically guards the most vulnerable surface of the U-bend against slag and flame exposure • Custom fitment – Manufactured to match precise tube diameters and bend radii for tight, stable installation • Easy to install – Mountable with clamps, tack welds, or stainless bands without system disassembly • Long service life – Reduces frequency of tube replacement, enhancing system reliability and uptime Applications • thermal power plants – Used on outer arcs of U-bend tubes in boilers and superheaters to protect against slag and oxidation • petrochemical plants – Shields return bends in high-temperature heaters exposed to process gas erosion and carburization • waste heat recovery – Protects bends in WHRBs and HRSGs subjected to hot gas streams and temperature fluctuations • industrial furnaces – Installed in radiant sections and high-temperature piping in incinerators and process furnaces • cement and metallurgy industries – Applied to bends exposed to flame, dust, and thermal cycling under extreme heat Conclusion The Cr23Ni13 U Type Outer Half Round Tube Shield by Ladhani Metal Corporation—manufacturer, supplier, and exporter—is a robust, heat-resistant solution for protecting the outer curvature of U-bend tubes in aggressive thermal environments. With high oxidation resistance, thermal stability, and long-term structural durability, this shield is ideal for demanding applications in power, chemical, and industrial sectors where performance and reliability are critical. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered components used to protect boiler and heat exchanger tubes from erosion, scaling, and high-temperature corrosion. These shields are widely applied in industrial systems exposed to thermal cycling, aggressive gases, and particulate flow. Their half-round shape allows for simple and secure installation over straight or curved tube surfaces, extending tube life and reducing maintenance needs. SS 410 U Type Outer Half Round Tube Shield The SS 410 U Type Outer Half Round Tube Shield is made from SS 410, a hardenable martensitic stainless steel known for its excellent strength, toughness, and moderate corrosion resistance. This outer U-type configuration is designed to protect the external arc of U-bend tubes in heat exchangers, boilers, and reheaters where abrasive flue gases and mechanical wear are common. SS 410’s hardness and resistance to thermal fatigue make it suitable for shielding outer tube surfaces exposed to harsh industrial environments. • Outer U Type Half Round Tube Shield – Protects the outer curvature of U-bend tubes from erosion, scaling, and mechanical impact caused by high-velocity gas and slag deposits. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of SS 410 U Type Outer Half Round Tube Shields, offering durable solutions for power generation and high-temperature applications. Chemical Composition of SS 410 – Martensitic Stainless Steel • Carbon (C): 0.08 – 0.15% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 11.5 – 13.5% • Nickel (Ni): ≤ 0.75% • Iron (Fe): Balance Applications: Suitable for high-temperature environments with abrasive gas flow and mechanical stress, where moderate corrosion resistance is sufficient. Uses • Outer arc protection for U-bend tubes in boilers, superheaters, and reheaters in thermal power plants • Shields tube bends in economizers and waste heat recovery systems from flue gas erosion • Applied in return bends in gas processing heaters and exhaust systems subjected to particulate flow • Ideal for high-strength, mechanically demanding environments where wear resistance is critical • Used in utility boilers, process furnaces, and other industrial systems operating under moderate corrosion and high heat conditions Features • High mechanical strength – Martensitic structure provides excellent hardness and wear resistance for abrasive service conditions • Moderate corrosion resistance – Chromium content offers basic protection against oxidation and steam exposure • Outer bend coverage – Shields the most exposed and impact-prone arc of the U-bend tube • Precision fit – Custom-fabricated to match tube diameters and bend radii, ensuring tight, vibration-free installation • Easy to install – Mountable using stainless steel bands, clamps, or tack welds without dismantling the system • Cost-effective – Offers durable tube protection with high strength at a lower material cost compared to austenitic grades Applications • power generation – Protects outer curves of U-bend tubes in high-temperature zones of boilers and reheaters • petrochemical processing – Shields tube bends in process heaters and reformers from thermal and gas erosion • waste heat recovery – Applied in WHRBs and HRSGs to guard against slag impact and scale formation • industrial furnaces – Suitable for high-wear zones where heat and particulate flow cause surface degradation • general industry – Used in utility boilers and gas exhaust systems where mechanical protection is needed with moderate corrosion resistance Conclusion The SS 410 U Type Outer Half Round Tube Shield by Ladhani Metal Corporation—manufacturer, supplier, and exporter—is a reliable and economical solution for protecting U-bend tube outer surfaces in boilers, heat exchangers, and thermal process systems. With excellent mechanical strength, good thermal stability, and moderate corrosion resistance, it is ideal for industrial applications that demand abrasion resistance and long service life in high-temperature environments. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered protective components designed to safeguard boiler and heat exchanger tubes from thermal fatigue, oxidation, and mechanical erosion. These shields improve system reliability and extend tube service life in harsh industrial environments. The half-round form enables simple installation and effective protection of exposed tube surfaces. SS 310 U Type Half Round Tube Shield The SS 310 U Type Half Round Tube Shield is a high-temperature protective sleeve designed to cover U-bend and straight sections of tubes in boilers, superheaters, and heat exchangers. Made from stainless steel grade 310, it offers outstanding resistance to oxidation, carburization, and thermal stress at elevated temperatures. The U-type design ensures complete protection of return bends, where tube degradation is most common. Available in both inner and outer U configurations, these shields are custom-bent to match tube radius and diameter. • Outer U Type Half Round Tube Shield – Protects the external arc of the U-bend from radiant heat, slag buildup, and erosion. • Inner U Type Half Round Tube Shield – Shields the internal curve of the bend from gas turbulence, scaling, and corrosion. Ladhani Metal Corporation is a leading manufacturer and exporter of SS 310 U Type Half Round Tube Shields, offering durable and tailored solutions for global heat transfer systems. Chemical Composition of SS 310 – High Temperature Austenitic Stainless Steel • Carbon (C): ≤ 0.25% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.50% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Applications: Preferred in high-temperature operations where oxidation resistance, heat stability, and carburization resistance are essential. Uses • U-bend protection in superheater and reheater coils • Shielding curved tubes in furnace coils and process heat exchangers • Prevention of high-temperature erosion in WHRB and HRSG systems • Surface protection in reformers and chemical reactors • Safeguarding heat transfer tubes in incinerators and kilns Features • Made from high-quality SS 310, the shield offers superior resistance to oxidation, scaling, and high-temperature corrosion, making it suitable for continuous exposure up to 1100°C. • The inner and outer U-type configurations provide complete protection for both sides of curved tube bends, ensuring uniform shielding in the most erosion-prone areas. • Precision-formed to match the tube’s bend radius and diameter, ensuring a tight, vibration-free fit that enhances durability and minimizes tube wall exposure. • Retains mechanical strength and dimensional stability under cyclic thermal loading, preventing deformation, cracking, or failure in high-heat environments. • Offered in various finishes such as pickled, passivated, or bright annealed to suit different service conditions and enhance surface corrosion resistance. • Easily installed using welding, clamping, or banding methods without requiring tube removal, enabling quick field installation and minimal system downtime. • Fully customizable in terms of thickness, length, and radius, allowing seamless integration with existing boiler, furnace, or heat exchanger systems. Applications • thermal power plants – Protects U-bend coils in superheaters and reheaters. Resists scale formation and creep at high flue gas temperatures. • petrochemical refineries – Shields curved exchanger tubes in reformers and heaters. Maintains integrity under carburizing and oxidizing atmospheres. • waste heat recovery systems (WHRBs) – Guards return bends against ash and slag attack. Enhances tube durability in high-flow, abrasive environments. • chemical and fertilizer plants – Used in U-tube reactors and ammonia converters. Prevents corrosion and surface damage under cyclic thermal loads. • HRSGs and boilers – Applied to curved tube sections in heat recovery units. Ensures stability under rapid heating and cooling cycles. Conclusion The SS 310 U Type Half Round Tube Shield by Ladhani Metal Corporation offers superior protection for curved tube sections operating in high-temperature and corrosive service conditions. Its exceptional resistance to oxidation and carburization makes it ideal for thermal, chemical, and energy-intensive industries. Manufactured with precision, these shields are available in custom sizes and finishes, ensuring a tight fit and long-term durability. For reliable and cost-effective tube protection, Ladhani Metal Corporation provides trusted solutions tailored to your operational demands. For design assistance, material selection, or quotation inquiries, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-fabricated components used to protect the external surfaces of tubes in boilers, heat exchangers, and high-temperature industrial equipment. These shields are critical for reducing erosion, oxidation, and thermal degradation, particularly in high-temperature zones where process gases, flames, or particulate matter can damage tube integrity over time. 1Cr20Ni14Si2 Half Round Tube Shield The 1Cr20Ni14Si2 Half Round Tube Shield is a semi-cylindrical protective sleeve manufactured from a high-performance austenitic stainless steel alloy consisting of approximately 20% chromium, 14% nickel, and 2% silicon. This alloy is designed for excellent oxidation resistance, carburization resistance, and high-temperature structural stability. The inclusion of silicon significantly enhances the formation of a protective oxide film, making it suitable for use in severe thermal environments such as industrial furnaces, superheaters, and reformers. The shield’s half-round profile is engineered for easy installation over the tube surface, ensuring a tight, durable fit and long-term protection. Chemical Composition of 1Cr20Ni14Si2 – Austenitic Heat-Resistant Stainless Steel • Carbon (C): ≤ 0.15% • Silicon (Si): 1.50 – 2.50% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Chromium (Cr): 19.0 – 21.0% • Nickel (Ni): 13.0 – 15.0% • Iron (Fe): Balance Uses • Boiler Tube Protection – Shields critical areas of superheater and reheater tubes from oxidation and scale formation under high flue gas temperatures. • Furnace Tube Shielding – Guards against flame impingement, high-temperature corrosion, and mechanical erosion in radiant and convection zones. • Heat Exchanger Cladding – Offers external protection for tubes subjected to thermal shock and corrosive process gases. • Steam Reforming Equipment – Prevents surface degradation of tubes in syngas and hydrogen production systems operating under carburizing conditions. • Waste Heat Boilers and Incinerators – Provides a thermal barrier for tubes exposed to particulate-laden gas flows and fluctuating temperatures. Features • Excellent Oxidation Resistance – High chromium and silicon content form a dense, protective oxide layer for long service in oxidizing environments. • Carburization and Thermal Fatigue Resistance – Suitable for prolonged use in atmospheres containing hydrocarbons, CO, and high radiant heat. • High-Temperature Durability – Retains strength and resists creep deformation at service temperatures up to 1000°C. • Austenitic Microstructure – Offers superior ductility, resistance to cracking under thermal cycling, and excellent metallurgical stability. • Easy Installation – Half-round configuration allows for fast on-site fitment using mechanical clamping or welding, with minimal tube disruption. • Surface Finishing Options – Available in pickled, passivated, or bright annealed finishes for improved corrosion and heat resistance. • Custom Built – Manufactured to meet specific size, thickness, and design requirements for varied industrial applications. Applications • Thermal Power Plants – Used to protect boiler tubes in high-temperature zones like superheaters, economizers, and air preheaters. • Petrochemical and Refining Plants – Deployed in furnace tubes, reformer systems, and transfer line exchangers where oxidation and carburization are concerns. • Waste-to-Energy Systems – Protects boiler and heat recovery tubes from corrosive gas attack and ash erosion in incinerators. • Metallurgical Furnaces – Applied in annealing, forging, and reheating furnaces for protecting tube walls exposed to high heat and corrosive gases. • Cement and Lime Kilns – Shields heat recovery piping and cooler tubes from abrasion and elevated thermal conditions. • Chemical Process Equipment – Guards steam and process tubes in reactors, condensers, and exchangers from scaling and thermal damage. Conclusion The 1Cr20Ni14Si2 Half Round Tube Shield by Ladhani Metal Corporation is engineered to perform reliably in high-temperature, high-corrosion industrial environments. With excellent resistance to oxidation, carburization, and thermal fatigue, this alloy-based shield offers superior performance and longevity for boiler and furnace applications. Its austenitic structure ensures mechanical stability and ductility under extreme conditions, while its precise half-round design enables convenient installation and durable coverage. Custom-built to your project’s specifications, Ladhani Metal Corporation’s tube shields represent a smart investment in system protection, reliability, and long-term efficiency. For technical details, customization options, or a quotation, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are high-performance components designed to protect heat exchanger and boiler tubes from thermal damage, erosion, and high-temperature corrosion. These shields play a vital role in extending tube life and ensuring stable operation in demanding industrial environments such as petrochemical plants, power generation facilities, and high-temperature furnaces. 1Cr25Ni20Si2 Half Round Tube Shield The 1Cr25Ni20Si2 Half Round Tube Shield is a semi-cylindrical tube protector made from a heat-resistant alloy consisting of 25% chromium, 20% nickel, and 2% silicon. This alloy is known for its outstanding resistance to oxidation, carburization, and scaling at elevated temperatures, often exceeding 1100°C. The presence of silicon further enhances its oxidation resistance by forming a stable protective film on the surface. These shields are precision-formed in a half-round profile for easy clamping or welding over the tube surface, delivering a tight and durable fit. Chemical Composition of 1Cr25Ni20Si2 – Heat-Resistant ss Austenitic Alloy • Carbon (C): ≤ 0.20% • Silicon (Si): 1.50 – 2.50% • Manganese (Mn): ≤ 1.50% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Uses • Superheater and Reheater Tube Protection – Shields tubes from oxidation and metal dusting under high steam and flue gas temperatures in utility boilers. • Furnace Tube Protection – Prevents damage from flame impingement, scaling, and spalling in radiant and convection furnace zones. • Reforming and Cracking Units – Used in petrochemical plants to protect process tubes from carburization and oxidation during prolonged high-temperature service. • Air Preheaters and Heat Recovery Systems – Guards tubes from thermal fatigue and corrosive ash erosion in waste heat systems. • Gas-Fired and Biomass Boilers – Applied to protect critical tube sections exposed to high-velocity combustion gases and corrosive deposits. Features • Superior Oxidation Resistance – The combination of chromium, nickel, and silicon provides long-term stability in oxidizing environments above 1000°C. • Excellent Carburization and Sulfidation Resistance – Performs well in carbon-rich and sulfur-laden atmospheres, making it ideal for petrochemical service. • High Mechanical Strength – Retains structural integrity under thermal cycling and mechanical load at elevated service temperatures. • Precision Half-Round Design – Ensures easy fitment over existing tubes with minimal disruption to equipment layout or flow design. • Enhanced Surface Protection – Silicon contributes to the formation of a dense oxide scale, minimizing material loss due to scaling. • Custom Dimensions – Available in a range of thicknesses, diameters, and lengths with optional surface treatments like bright annealing and passivation. Applications • Thermal Power Plants – Used in critical boiler zones such as superheaters and economizers where high-temperature oxidation resistance is required. • Petrochemical and Refining Industries – Deployed in reformers, ethylene crackers, and process gas heaters where tubes face carburizing and oxidizing atmospheres. • Metallurgical Furnaces – Protects tubes and gas paths in steel, non-ferrous, and heat treatment furnaces operating under extreme thermal conditions. • Waste-to-Energy Systems – Shields boiler tubes and superheaters from corrosive ash and high flue gas temperatures in incinerators and biomass units. • Cement and Glass Plants – Guards heat recovery and exhaust handling tubes from scaling and thermal wear in rotary kilns and regenerative chambers. Conclusion The 1Cr25Ni20Si2 Half Round Tube Shield by Ladhani Metal Corporation is engineered for high-performance protection in environments where conventional stainless steels may fail. Its exceptional resistance to oxidation, carburization, and high-temperature scaling makes it a preferred solution for boiler, furnace, and heat exchanger tube protection across several heavy industries. With customizable sizes, expert fabrication, and material certifications, Ladhani Metal Corporation delivers reliable and long-lasting shielding components designed to enhance system integrity, reduce maintenance costs, and ensure uninterrupted operation under extreme thermal stress. For specification or to request a quotation, please contact Ladhani Metal Corporation.