Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are robust, precision-fabricated protective sleeves designed to guard the outer surfaces of tubes in boilers, heat exchangers, incinerators, and high-temperature processing equipment. Engineered to extend the service life of tubes exposed to corrosive gases, abrasive particulates, and elevated temperatures, these shields provide a reliable barrier against mechanical and chemical degradation. The half-round design facilitates easy installation while ensuring a secure, form-fitting layer of defense. 1Cr13 Half Round Tube Shield The 1Cr13 Half Round Tube Shield is a semi-cylindrical component manufactured from martensitic stainless steel containing approximately 13% chromium. Classified under the 1Cr13 grade, this alloy delivers good corrosion resistance, excellent wear performance, and moderate strength at elevated temperatures. It is especially suited for thermal environments that are not extremely oxidizing or carburizing but where erosion and mechanical wear are a concern. With a higher hardness potential through heat treatment and moderate thermal resistance, 1Cr13 shields are ideal for applications involving flue gas exposure, soot-laden atmospheres, and temperature cycling. The shield’s half-round configuration is precision-engineered for optimal tube coverage and long-term durability. It offers a balance of strength, corrosion resistance, and cost-effectiveness, making it suitable for a wide range of industrial processes. Chemical Composition of 1Cr13 – Martensitic Stainless Steel • Carbon (C): 0.15 – 0.20% • Silicon (Si): ≤ 1.00% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Chromium (Cr): 12.0 – 14.0% • Nickel (Ni): ≤ 0.60% • Iron (Fe): Balance Uses • Boiler Tube Protection – Shields tube surfaces from flue gas erosion, ash particle abrasion, and soot buildup in economizers and waterwalls. • Heat Exchanger Tubes – Provides an extra layer of wear resistance in zones prone to mechanical stress and fluid turbulence. • Incinerator and Waste Heat Units – Guards tubes exposed to fluctuating temperatures, slag, and particulate deposits. • Cement Plant Piping – Protects tubing and ducts in kiln exhaust systems from abrasive dust and high flow velocity. • Air Preheaters and Recuperators – Enhances the durability of components subjected to temperature variations and corrosive gases. Features • Moderate Oxidation Resistance – Chromium content enables good performance in mildly oxidizing environments and intermittent exposure to high temperatures. • Wear and Abrasion Resistance – Martensitic structure offers high surface hardness and resistance to mechanical wear. • Heat Treatable – Can be hardened to increase durability and resistance to deformation. • Cost-Effective – Provides a lower-cost alternative to austenitic and superalloy shields for moderate service conditions. • High Dimensional Accuracy – Manufactured with tight tolerances to ensure secure fitment and uniform tube coverage. • Convenient Installation – Half-round shape enables quick mounting through welding or clamping techniques. • Versatile Finishing Options – Supplied with pickled or mechanically polished surfaces to improve corrosion resistance and adhesion. Applications • Power Generation – Used in economizer, preheater, and convection sections of boilers to prevent erosion and fouling. • Chemical and Fertilizer Plants – Protects exposed tube surfaces in systems with moderate chemical exposure. • Metallurgical Furnaces – Shields mechanical and flue components exposed to particulate movement and temperature cycling. • Pulp and Paper Industry – Used in recovery boilers and heat exchangers where corrosion resistance and mechanical strength are both required. • Petrochemical Plants – Applied in lower-temperature zones where scaling and erosion are primary concerns. Conclusion The 1Cr13 Half Round Tube Shield by Ladhani Metal Corporation provides an optimal solution for industrial tube protection in moderate temperature and corrosion environments. Its martensitic stainless steel composition ensures excellent wear resistance, good oxidation stability, and structural strength at a competitive cost. Designed for easy installation and reliable performance, these shields are ideal for various applications in power, process, and heat recovery systems. Custom-built to meet specific dimensions, material thicknesses, and finishing preferences, 1Cr13 tube shields offer dependable service life extension for critical heat transfer equipment. For technical specifications, pricing, or customization inquiries, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are high-precision protective components designed to shield boiler and heat exchanger tubes from erosion, high-temperature scaling, and aggressive gas flows. Crafted from superior stainless steel alloys, these shields enhance equipment reliability and performance in demanding industrial conditions. SS 310 Half Round Tube Shield The SS 310 Half Round Tube Shield is a semi-circular metallic shield fabricated using premium stainless steel grade 310, known for its outstanding resistance to oxidation, scaling, and corrosion at elevated temperatures. This shield is specifically designed for use in environments involving extreme thermal cycling, aggressive combustion gases, and high mechanical stress. The half-round configuration ensures easy, secure installation over exposed tubes, forming a protective barrier that extends component life and reduces maintenance costs. Chemical Composition of SS 310 – Austenitic Stainless Steel • Carbon (C): ≤ 0.25% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.50% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Uses : • Boiler Tube Protection – Shields boiler tubes from direct exposure to high-temperature flue gases, reducing metal loss due to oxidation and abrasive ash erosion in thermal power plants. • Heat Exchanger Tube Shielding – Provides a protective layer against high-temperature corrosion and flow-induced wear, preserving efficiency and reducing failure risks. • Furnace Tube Safeguarding – Resists flame impingement and scale buildup in industrial furnaces, extending the life of radiant and convection section tubes. • Petrochemical Process Protection – Used in reactors and reformers where exposure to hot process gases and thermal cycling can severely damage unprotected tubes. • Steam Superheater and Reheater Systems – Guards tubes from surface deterioration in high-pressure steam circuits, improving operational longevity and safety. Features : • High-Temperature Resistance – SS 310 maintains structural integrity at temperatures up to 1100°C, ideal for high-heat zones in boilers and furnaces. • Corrosion and Oxidation Resistance – Superior chromium and nickel content ensures excellent resistance to oxidation, scaling, and carburization even under continuous thermal exposure. • Precision Half-Round Design – Ensures a tight, secure fit on existing tube surfaces, enabling quick installation and easy replacement without interrupting system performance. • Custom Fabrication – Available in various thicknesses, lengths, and diameters to suit different tube sizes and geometries, with optional welding or clamping attachments. • Surface Finishing Options – Offered in bright annealed, pickled, or passivated finishes for enhanced appearance and additional surface protection. Applications : • Thermal Power Plants – Protects superheater and economizer tubes from soot erosion, slagging, and thermal stress caused by high-velocity flue gases. • Oil Refineries and Petrochemical Plants – Installed on high-temperature piping and reformer tubes exposed to corrosive gases, thermal cycling, and process variability. • Heat Recovery Steam Generators (HRSGs) – Enhances tube durability in combined-cycle plants where steam tubes face aggressive exhaust gas flow. • Chemical Processing Equipment – Applied in heat exchanger and reactor tubes that handle chemically reactive or acidic compounds at elevated temperatures. • Industrial Steam Boilers – Used in high-pressure steam systems across food, textile, pulp & paper, and marine industries to extend tube life and ensure safe operation. Conclusion The SS 310 Half Round Tube Shield by Ladhani Metal Corporation is a premium solution engineered for the most demanding high-temperature and corrosive environments. Its exceptional resistance to oxidation, scaling, and thermal fatigue makes it ideal for use in power plants, refineries, and process industries where tube protection is critical for safety and efficiency. By extending the life of boiler and heat exchanger tubes, reducing downtime, and minimizing repair costs, these shields offer long-term value and dependable performance. With custom sizing, precision fabrication, and strict quality control, Ladhani Metal Corporation delivers reliable shielding solutions tailored to meet the toughest industrial challenges. For technical inquiries, customization options, or to request a quote, please contact Ladhani Metal Corporation.

DIN 2628 Super Duplex steel flanges PN 250 are high-performance weld neck flanges engineered to meet the stringent requirements of the DIN 2628 standard. Designed for use in high-pressure systems up to 250 bar (3625 psi), these flanges are manufactured from Super Duplex stainless steel—an advanced alloy known for its exceptional strength and superior resistance to aggressive corrosion, particularly in chloride-rich and marine environments. Super Duplex flanges combine high mechanical integrity with excellent resistance to pitting, crevice corrosion, and stress corrosion cracking, making them ideal for demanding and safety-critical applications. Ladhani Metal Corporation is a globally recognized manufacturer and exporter of premium Super Duplex flanges. Our DIN 2628 PN 250 Super Duplex weld neck flanges are trusted by industries such as offshore oil and gas, desalination, chemical processing, and marine engineering for their unmatched durability and reliability. Each flange is precision-engineered to deliver optimal performance under extreme pressure, temperature, and corrosive conditions. Pressure Rating: • PN 250 (250 bar / 3625 psi): Suitable for high-pressure systems requiring maximum sealing integrity, superior strength, and corrosion resistance. Flange Type: • Weld Neck Flanges Feature a tapered hub that minimizes stress concentration at the weld point. Designed for high-load applications with frequent thermal cycling. • Flat Face (FF) Flanges Flat face design ensures uniform gasket compression and improved safety when mating with cast or brittle components. Super Duplex Steel Grade and Composition: Super Duplex 2507 (UNS S32750) • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 6.0 – 8.0% • Molybdenum (Mo): 3.0 – 5.0% • Nitrogen (N): 0.24 – 0.32% • Iron (Fe): Balance • Carbon (C): ≤ 0.03% • Manganese (Mn): ≤ 1.2% • Silicon (Si): ≤ 0.8% Applications: Exceptional resistance to chloride-induced corrosion, pitting, and erosion. Extensively used in offshore platforms, subsea piping, desalination plants, and chemical process systems exposed to severe environments. Applications of DIN 2628 Super Duplex Flanges PN 250: • Offshore Oil and Gas Used in subsea equipment, manifolds, and risers where high mechanical strength and resistance to saltwater and sour gas are critical. • Desalination and Water Treatment Ideal for high-chloride environments such as reverse osmosis systems and thermal desalination plants. • Chemical and Petrochemical Processing Reliable in handling aggressive chemicals, acids, and alkalis in reactors, storage tanks, and high-pressure pipelines. • Marine Engineering Performs well in seawater-exposed structures, including ballast systems, hull penetrations, and fire water systems. • Pulp and Paper Industry Resistant to bleaching agents and corrosive media used in pulp processing and chemical recovery systems. Key Features: • Manufactured to DIN 2628 specifications • PN 250 pressure class suitable for critical pressure-retaining applications • Weld neck configuration provides high structural support and fatigue resistance • Flat face variant for secure sealing in flange assemblies involving cast components • Made from Super Duplex 2507 for exceptional corrosion resistance and strength • Excellent performance in chloride-rich, high-temperature, and high-pressure environments • High resistance to erosion, fatigue, and stress corrosion cracking • Available in customized dimensions, surface finishes, and pressure ratings Conclusion: DIN 2628 Super Duplex Steel Flanges PN 250 from Ladhani Metal Corporation are engineered for the most demanding industrial environments where high pressure, corrosive media, and structural reliability are paramount. Offering the superior properties of Super Duplex 2507, these flanges deliver consistent performance and long-term durability in offshore, chemical, and marine applications. Contact Ladhani Metal Corporation for comprehensive technical data, custom configurations, or a tailored quotation to meet your specific application requirements.

DIN 2628 Monel flanges PN 250 are high-performance weld neck flanges engineered in compliance with the DIN 2628 standard. Designed for high-pressure applications up to 250 bar (3625 psi), these flanges are constructed from Monel alloys, known for their exceptional resistance to corrosion, particularly in acidic and saline environments. Monel flanges deliver robust mechanical strength and thermal stability, making them suitable for challenging industrial applications that involve fluctuating temperatures, corrosive substances, and high mechanical stress. Ladhani Metal Corporation is a reliable global manufacturer and exporter of Monel flanges, providing products that meet exacting international standards for quality and performance. Our DIN 2628 PN 250 Monel weld neck flanges are extensively used in chemical processing, marine engineering, desalination systems, and offshore oil and gas installations. Known for superior build quality and long-term durability, these flanges ensure safe and efficient operations in pressure-sensitive systems exposed to harsh service conditions. Pressure Rating: • PN 250 (250 bar / 3625 psi): Suitable for systems requiring high-pressure endurance, secure sealing capabilities, and enhanced structural integrity. Flange Type: • Weld Neck Flanges Characterized by a long tapered hub that minimizes stress at the weld junction. Ideal for high-temperature and high-pressure applications. • Flat Face (FF) Flanges Provides an even surface for gasket compression, ensuring reliable sealing. Well-suited for connections involving cast components or brittle materials. Monel Grades and Composition: Monel 400 (UNS N04400) • Nickel (Ni): ≥ 63.0% • Copper (Cu): 28.0 – 34.0% • Iron (Fe): ≤ 2.5% • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 0.5% • Carbon (C): ≤ 0.3% Applications: Offers excellent resistance to seawater, hydrofluoric acid, and alkalis. Commonly used in marine piping, pump shafts, heat exchangers, and chemical processing equipment. Monel K500 (UNS N05500) • Nickel (Ni): ≥ 63.0% • Copper (Cu): 27.0 – 33.0% • Aluminum (Al): 2.3 – 3.15% • Titanium (Ti): 0.35 – 0.85% • Iron (Fe): ≤ 2.0% • Carbon (C): ≤ 0.25% Applications: Precipitation-hardened alloy providing greater strength and hardness than Monel 400. Suitable for valves, springs, and high-strength fasteners in corrosive environments including marine and chemical processing systems. Applications of DIN 2628 Monel Flanges PN 250: • Marine Engineering Highly resistant to saltwater corrosion, suitable for shipbuilding, subsea pipelines, and desalination plants. • Chemical and Petrochemical Processing Performs well in environments containing strong acids, alkalis, and chlorinated solvents. • Offshore Oil and Gas Used in systems that handle sour gas, brine, and other corrosive fluids. • Power and Energy Ideal for condenser systems and piping exposed to high-pressure steam and corrosive environments. • Pulp and Paper Industry Effective in processes involving sulfur compounds and acidic bleaching agents. Key Features: • Designed in accordance with DIN 2628 specifications • Rated for PN 250 (250 bar / 3625 psi) pressure systems • Weld neck configuration ensures superior mechanical strength and fatigue resistance • Flat face option supports uniform gasket pressure distribution • Available in Monel 400 and Monel K500 grades • Excellent corrosion resistance in marine, chemical, and high-saline environments • High mechanical strength and good thermal performance • Custom dimensions, pressure classes, and surface finishes available on request Conclusion: DIN 2628 Monel Flanges PN 250 from Ladhani Metal Corporation are engineered for high-pressure systems operating in some of the most demanding service environments. With excellent resistance to corrosion, superior mechanical properties, and thermal stability, Monel flanges provide reliable, long-term service in critical applications across marine, chemical, and offshore industries. Contact Ladhani Metal Corporation for detailed product specifications, technical support, or to request a customized quote.

DIN 2627 Super Duplex Steel flanges PN 400 are robust, high-performance blind flanges engineered for extremely demanding applications requiring exceptional strength, corrosion resistance, and reliability under ultra-high-pressure conditions. Designed according to the DIN 2627 standard, these flanges are primarily used to isolate sections of piping systems, especially in environments that involve aggressive media such as seawater, acidic chemicals, and high-temperature fluids. With a PN 400 pressure rating (400 bar / 5800 psi), these flanges are suitable for critical systems where both mechanical strength and corrosion resistance are vital. Ladhani Metal Corporation is a globally recognized supplier and exporter of Super Duplex DIN flanges, offering products that meet or exceed international quality, safety, and performance standards for extreme-service applications. Pressure Rating: • PN 400 (400 bar / 5800 psi): Designed for high-pressure operations in chemically aggressive and mechanically demanding environments. Flange Type: • Blind Flanges Flat, solid flanges without a bore used to seal the end of piping systems. Ideal for temporary shutdowns, pressure testing, or future system expansion. • Flat Face (FF) Flanges Feature a flat sealing surface, suitable for use with full-face gaskets and flat mating components to ensure consistent and effective sealing under pressure. Super Duplex Steel Grades and Composition: Super Duplex 2507 (UNS S32750) • Chromium (Cr): 24 – 26% • Nickel (Ni): 6 – 8% • Molybdenum (Mo): 3 – 5% • Nitrogen (N): 0.24 – 0.32% • Iron (Fe): Balance Applications: Exceptional corrosion resistance in seawater, brines, and acidic environments. Commonly used in offshore structures, desalination plants, and chemical processing systems. Applications of DIN 2627 Super Duplex Flanges PN 400: • Offshore Oil and Gas Platforms Used in topside and subsea installations exposed to high salinity, pressure, and harsh chemical environments. • Desalination and Water Treatment Plants Resistant to chloride-induced corrosion and fouling in seawater intake and brine discharge systems. • Chemical and Petrochemical Processing Ideal for aggressive process media such as chlorides, sulfur compounds, and acids at high temperatures and pressures. • Marine Engineering and Shipbuilding Excellent corrosion resistance in marine atmospheres, making them suitable for seawater cooling, ballast systems, and structural piping. • Pulp and Paper Industry Deployed in bleaching plants and alkaline recovery lines where strength and corrosion resistance are essential. • Power Generation and Nuclear Facilities Reliable under high-temperature and pressure cycles in superheated steam, feedwater, and condenser systems. Key Features: • Manufactured to DIN 2627 standard • PN 400 pressure class for ultra-high-pressure environments • Blind flange design for secure pipe end sealing or access closure • Flat face type for even gasket compression and leak-free performance • Available in Super Duplex 2507 (UNS S32750) and S32760 • Excellent resistance to pitting, crevice corrosion, and stress corrosion cracking • Twice the strength of conventional stainless steels • Widely used in offshore, marine, petrochemical, and water treatment industries • Custom options available: sizes, pressure ratings, face types, and finishes Conclusion: DIN 2627 Super Duplex Steel Flanges PN 400 by Ladhani Metal Corporation are designed to withstand the harshest industrial environments, providing unmatched corrosion resistance, mechanical strength, and sealing reliability. These flanges are ideal for mission-critical applications in offshore, marine, chemical, and energy industries. For technical assistance, custom fabrication, or detailed product specifications, contact Ladhani Metal Corporation and ensure your systems are protected by industry-leading flange solutions.

DIN 2627 Duplex Steel flanges PN 400 are high-integrity blind flanges engineered for ultra-high-pressure systems where enhanced corrosion resistance, mechanical strength, and stress corrosion cracking resistance are crucial. These flanges are manufactured in compliance with the DIN 2627 standard and are used to seal the ends of piping systems operating under extreme conditions involving high pressure, temperature fluctuations, and aggressive media such as chlorides or acidic compounds. The PN 400 rating (400 bar / 5800 psi) ensures these flanges are suitable for the most demanding environments. Made from Duplex and Super Duplex stainless steels—such as Duplex 2205 (UNS S31803/S32205) and Super Duplex 2507 (UNS S32750)—they offer a unique combination of austenitic and ferritic microstructures, providing exceptional resistance to pitting, crevice corrosion, and stress corrosion cracking. Pressure Rating: • PN 400 (400 bar / 5800 psi): Designed for use in high-pressure systems where superior strength and corrosion resistance are required. Flange Type: • Blind Flanges Flat, solid flanges without a bore, used to seal off pipeline ends or nozzles for isolation, pressure testing, or future expansion. • Flat Face (FF) Flanges Feature a flat sealing surface suitable for use with full-face gaskets and flat-faced mating components to ensure uniform sealing under high-pressure conditions. Duplex Steel Grades and Composition: Duplex 2205 (UNS S31803 / S32205) • Chromium (Cr): 21 – 23% • Nickel (Ni): 4.5 – 6.5% • Molybdenum (Mo): 2.5 – 3.5% • Nitrogen (N): 0.08 – 0.2% • Iron (Fe): Balance Applications: High strength and excellent resistance to chloride-induced stress corrosion and pitting. Commonly used in chemical tanks, pipelines, and pressure vessels. Applications of DIN 2627 Duplex Steel Flanges PN 400: • Offshore and Subsea Oil & Gas Installations Withstand high pressure, chloride-rich environments, and dynamic loading in risers, manifolds, and subsea pipelines. • Desalination Plants and Seawater Systems Exceptional resistance to chloride-induced corrosion makes them ideal for seawater intake and brine discharge lines. • Chemical and Petrochemical Plants Used in corrosive process lines involving acids, solvents, and high-temperature hydrocarbons. • Pulp and Paper Industry Ideal for chemical recovery systems and chlorine dioxide bleaching where both corrosion and strength are essential. • Heat Exchangers and Pressure Vessels High strength and thermal fatigue resistance under cyclic temperature and pressure changes. • Power Generation and Nuclear Systems Effective in high-pressure steam and cooling systems where corrosion resistance and mechanical integrity are mandatory. Key Features: • Compliant with DIN 2627 specifications • PN 400 pressure rating for ultra-high-pressure applications • Blind flange configuration ensures secure system isolation • Flat face design supports full-face gasket usage for optimal sealing • Available in Duplex 2205 and Super Duplex 2507 • Excellent resistance to pitting, crevice corrosion, and stress corrosion cracking • High mechanical strength with good weldability and fatigue resistance • Used across offshore, petrochemical, desalination, and energy sectors • Custom dimensions, materials, and finishes available upon request Conclusion: DIN 2627 Duplex Steel Flanges PN 400 from Ladhani Metal Corporation deliver unmatched reliability and performance in the harshest operating conditions. Whether used in high-pressure offshore pipelines or corrosive chemical systems, these flanges offer long-term sealing, structural integrity, and corrosion resistance. Reach out to Ladhani Metal Corporation for technical assistance, material selection, or customized Duplex flange solutions tailored to your operational demands.

DIN 2576 Super Duplex Flanges PN 10 are high-performance, slip-on flanges manufactured from super duplex stainless steel, designed for piping systems operating under low to medium pressures. Produced in accordance with the DIN 2576 standard, these flanges offer exceptional mechanical strength combined with superior corrosion resistance, making them ideal for highly aggressive and chloride-laden environments. The slip-on design facilitates easy placement over the pipe and enables secure welding, ensuring precise alignment and a reliable seal across various industrial applications. Ladhani Metal Corporation is a trusted manufacturer and global supplier of super duplex steel flanges, providing products that meet stringent international standards in terms of dimensions, metallurgy, and performance. DIN 2576 super duplex flanges are especially valued in industries where resistance to pitting, crevice corrosion, and stress corrosion cracking is critical, including marine, chemical, and wastewater systems. Pressure Rating: • PN 10 (10 bar / 145 psi): Designed for moderate-pressure systems demanding long-term durability in corrosive environments. Flange Types: • Slip-On Flanges These flanges slide over the pipe and are welded on both sides, offering ease of installation and secure mechanical performance. • Flat Face (FF) Flanges Designed for use with flat gaskets and mating surfaces, these flanges are ideal for applications involving non-metallic or cast components. Super Duplex Stainless Steel Grades and Composition: Super Duplex 2507 (UNS S32750) Composition: • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 6.0 – 8.0% • Molybdenum (Mo): 3.0 – 5.0% • Nitrogen (N): 0.24 – 0.32% • Iron (Fe): Balance Applications: Super Duplex 2507 delivers superior yield strength and corrosion resistance, particularly in extreme environments. It is commonly used in subsea equipment, chemical containment, high-pressure systems, and offshore platforms exposed to seawater and chlorides. Applications of DIN 2576 Super Duplex Flanges: • Offshore and Marine Engineering Well-suited for seawater cooling systems, risers, and structural elements exposed to marine conditions. • Chemical and Petrochemical Industries Ideal for conveying highly corrosive fluids, acids, and chlorides in reactors and pipelines. • Water Treatment and Desalination Applied in reverse osmosis systems, brine piping, and high-salinity water circuits requiring enhanced corrosion resistance. • Pulp and Paper Industry Offers protection against aggressive bleaching agents and chemical fluids under pressurized conditions. • Oil and Gas Used in critical systems like separators, manifolds, and sour gas applications. • Structural and Pressure Vessel Fabrication Preferred for tanks and pressure vessels operating under corrosive and mechanical stress. Key Features: • Fully compliant with DIN 2576 standard specifications • PN 10 pressure rating for use in moderate-pressure applications • Superior resistance to chloride-induced pitting, crevice corrosion, and stress corrosion cracking • High mechanical strength reduces material thickness and overall system weight • Manufactured using Super Duplex 2507 and other super duplex alloys • Slip-on design ensures straightforward alignment and welding • Flat face variants suitable for a wide range of gaskets and connection types • Widely used across marine, chemical, oil and gas, and water treatment sectors • Custom sizes, face configurations, and finishes available on request Conclusion: DIN 2576 Super Duplex Flanges PN 10 by Ladhani Metal Corporation offer exceptional strength and corrosion resistance for highly demanding industrial environments. Available in Super Duplex 2507 and other super duplex grades, these flanges ensure reliable performance in systems facing high salinity, pressure, and temperature. For technical guidance, grade selection, or customized project solutions, reach out to Ladhani Metal Corporation today.

DIN 2576 Duplex Flanges PN 10 are robust, slip-on flanges engineered from duplex stainless steel, designed for piping systems operating under low to medium pressures. Manufactured according to the DIN 2576 standard, these flanges combine high mechanical strength with excellent corrosion resistance, particularly in chloride-rich and aggressive chemical environments. The slip-on configuration allows for simple positioning over the pipe and secure welding, ensuring accurate alignment and strong sealing integrity in a variety of industrial applications. Ladhani Metal Corporation is a renowned manufacturer and global exporter of duplex steel flanges, offering products that conform to international specifications in terms of dimensions, metallurgy, and performance. DIN 2576 duplex flanges are especially valued in industries requiring resistance to pitting, crevice corrosion, and stress corrosion cracking, including offshore, chemical, and wastewater systems. Pressure Rating: • PN 10 (10 bar / 145 psi): Suitable for moderate-pressure systems requiring long-term performance in harsh environments. Flange Types: • Slip-On Flanges Designed to slide over the pipe and be welded on both sides, these flanges offer easy installation and secure mechanical integrity. • Flat Face (FF) Flanges Used in conjunction with flat gaskets and flat mating surfaces, ideal for connections involving non-metallic or cast components. Duplex Stainless Steel Grades and Composition: Duplex 2205 (UNS S32205 / S31803) Composition: • Chromium (Cr): 21.0 – 23.0% • Nickel (Ni): 4.5 – 6.5% • Molybdenum (Mo): 2.5 – 3.5% • Nitrogen (N): 0.14 – 0.20% • Iron (Fe): Balance Applications: Duplex 2205 offers twice the yield strength of conventional stainless steels with superior resistance to chloride-induced corrosion. Common applications include chemical processing, desalination, marine systems, and structural components in offshore platforms. Applications of DIN 2576 Duplex Flanges: • Offshore and Marine Engineering Ideal for seawater cooling systems, risers, and structural supports exposed to harsh marine environments. • Chemical and Petrochemical Industries Used in systems handling aggressive acids, chlorides, and solvents where standard stainless steels are insufficient. • Water Treatment and Desalination Applied in brine systems, high-salinity piping, and reverse osmosis plants for their resistance to pitting and scaling. • Pulp and Paper Industry Resists corrosion from bleaching chemicals and process fluids under high pressure. • Oil and Gas Suitable for pressure control systems, separators, and sour service applications. • Structural and Pressure Vessel Fabrication Used in tanks, pressure vessels, and piping subjected to mechanical and corrosive stress. Key Features: • Compliant with DIN 2576 standards • PN 10 pressure rating for moderate-pressure use • Excellent resistance to chloride stress corrosion, pitting, and crevice corrosion • High strength-to-weight ratio, reducing component size and cost • Available in Duplex 2205, Super Duplex 2507, and other custom grades • Slip-on design ensures quick and accurate pipe connections • Flat face options compatible with a variety of gaskets and materials • Ideal for chemical, marine, oil and gas, and water treatment sectors • Custom dimensions, face types, and surface finishes available Conclusion: DIN 2576 Duplex Flanges PN 10 from Ladhani Metal Corporation provide outstanding durability and corrosion resistance for challenging industrial environments. With availability in Duplex 2205 and Super Duplex 2507, these flanges are a reliable solution for systems exposed to high chlorides, pressure, and temperature. For technical specifications, grade selection, or project-specific orders, contact Ladhani Metal Corporation today.

DIN 2569 Super Duplex Steel Flanges PN 100 are precision-engineered welding neck flanges manufactured from corrosion-resistant super duplex stainless steel, specifically designed to withstand extreme mechanical stress and harsh environments. Built to DIN 2569 standards, these flanges offer superior strength, pitting resistance, and durability, making them ideal for use in offshore, marine, chemical, petrochemical, and water treatment industries. Ladhani Metal Corporation is a reputable manufacturer and exporter of super duplex steel flanges, delivering products that comply with international quality standards. The welding neck design ensures high-integrity, leak-proof connections—perfect for applications with fluctuating pressure, high temperatures, and aggressive media. Pressure Rating: • PN 100 (100 bar / 1450 psi): Specifically designed for high-pressure systems requiring robust sealing performance, excellent corrosion resistance, and structural strength in corrosive and high-stress environments. Flange Types: • Welding Neck Flanges Provide a tapered hub for stress distribution, ideal for high-pressure and corrosive piping systems. • Raised Face (RF) Flanges Facilitates effective gasket compression and sealing under elevated pressure and temperature. • Flat Face (FF) Flanges Used for connections with flat-faced components or non-metallic sealing materials. • Forged Welding Neck Flanges Offer enhanced strength, dimensional precision, and pressure resistance. • Custom-Machined Flanges Available in a wide range of sizes, pressure classes, and super duplex steel grades to meet specific project requirements. Super Duplex Steel Grade and Composition: 1. ASTM A182 F53 (UNS S32750) Composition: • Chromium (Cr): 24.0–26.0% • Nickel (Ni): 6.0–8.0% • Molybdenum (Mo): 3.0–5.0% • Nitrogen (N): 0.24–0.32% • Manganese (Mn): ≤ 1.20% • Carbon (C): ≤ 0.030% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.020% Applications: Ideal for use in highly corrosive conditions such as offshore platforms, subsea piping, desalination systems, pressure vessels, and high-pressure chemical reactors. Provides excellent resistance to pitting, crevice corrosion, and stress corrosion cracking. Applications of DIN 2569 Super Duplex Steel Flanges: • Oil and Gas Pipelines: Used in high-pressure, high-corrosion subsea and offshore piping systems. • Offshore and Marine Engineering: Installed in seawater cooling lines, risers, and ballast systems for maximum corrosion resistance. • Petrochemical and Refinery Units: Applied in reactors, columns, and corrosive process piping exposed to high stress and aggressive chemicals. • Water Treatment and Desalination: Used in brine systems, RO pipelines, and chemical dosing lines requiring high strength and pitting resistance. • Pulp and Paper Industry: Employed in bleach plants and digester lines handling chlorinated compounds under pressure. Key Features: • Manufactured to DIN 2569 standard • Available in PN 100 pressure rating • High strength and corrosion resistance • Superior pitting and stress corrosion cracking resistance • Excellent performance in marine and chemical environments • Designed for permanent, high-pressure pipe connections • Supplied with test certificates, quality assurance documents, and full material traceability • Can be surface-treated with pickling, passivation, or shot blasting Conclusion: DIN 2569 Super Duplex Steel Flanges PN 100 from Ladhani Metal Corporation offer premium strength, safety, and corrosion resistance for demanding environments. Suitable for a wide range of critical applications, these flanges are available in custom sizes and pressure classes. For technical details, orders, or consultation, contact Ladhani Metal Corporation today.