Ladhani Metal Corporation offers 1Cr13 Outer Half Round 90 Degree Bend Tube Shields engineered to provide robust protection for the outer arc of U-bends and 90-degree tube turns in boilers, heat exchangers, superheaters, reheaters, and industrial furnaces. The semi-cylindrical profile is precisely formed to conform to the curvature of return tube bends, acting as a physical shield against flue gas erosion, soot blower impact, and ash particle abrasion. These shields are well-suited for use in thermal power plants, utility boilers, waste heat recovery systems, and industrial heaters where mechanical protection is critical. Ladhani Metal Corporation is a dependable manufacturer, supplier, and exporter of 1Cr13 Outer Half Round 90 Degree Bend Tube Shields, offering custom-made options to meet specific plant and system requirements. 1Cr13 Grade Chemical Composition – Martensitic Stainless Steel • Carbon (C): 0.15 – 0.20% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 12.0 – 14.0% • Nickel (Ni): ≤ 0.60% • Iron (Fe): Balance Applications: Ideal for dry flue gas systems, high-velocity ducting, and thermal processing equipment where resistance to wear and moderate oxidation is essential. Uses • Protects 90-degree bends in superheaters and reheaters from mechanical erosion • Applied in WHRBs, HRSGs, and industrial furnaces under dry service conditions • Shields tube curves from flue gas abrasion, ash particle impact, and soot blower blasts • Used in exhaust systems and ducting where moderate corrosion resistance is sufficient Features • High wear resistance – Withstands mechanical damage from ash and particulate flow • Moderate oxidation resistance – Performs well in dry, non-aggressive gas environments • Structural strength – Maintains rigidity and protection under high mechanical stress • Precision fit – Formed to match exact bend radii for effective coverage • Easy to install – Can be clamped, tack welded, or banded based on operational needs • Size flexibility – Available in a range of lengths, thicknesses, and diameters for tailored application Applications • Power and utility boilers – Shields return bends from soot erosion and surface damage • Waste heat recovery units – Protects tube bends in clean and dry gas systems • Industrial furnaces – Applied in zones with high particulate flow and moderate heat exposure • Petrochemical and cement plants – Guards high-wear tube bends from abrasive gas streams Conclusion The 1Cr13 Outer Half Round 90 Degree Bend Tube Shield by Ladhani Metal Corporation offers durable and cost-effective protection for tube bends operating in dry, high-velocity, and mildly corrosive environments. Its mechanical strength and resistance to erosion make it a practical solution for extending the service life of critical tube components. For tailored solutions, technical consultation, or sizing requirements, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #halftubeshield #utypehalftubeshield #tubeshieldexporter

Half Round Tube Shield Half Round Tube Shields from Ladhani Metal Corporation are durable, precisely fabricated components used to protect boiler tubes from erosion, scaling, and corrosion caused by flue gas flow and particulate impact. Their half-round, semi-cylindrical structure is designed to conform closely to tube surfaces, especially in areas subjected to repeated thermal cycling or mechanical wear. These shields are extensively applied in boilers, heat exchangers, and waste heat recovery systems. 1Cr25Ni20Si2 Half Round Tube Shield for LTSH Tube The 1Cr25Ni20Si2 Half Round Tube Shield is manufactured from a high-performance chromium-nickel-silicon alloy designed for elevated-temperature service. With approximately 25% chromium, 20% nickel, and added silicon content, this alloy exhibits superior resistance to oxidation, thermal fatigue, and carburization. Its mechanical stability under high-temperature operation makes it a preferred material for protective applications in Low Temperature Superheater (LTSH) zones. The Low Temperature Superheater (LTSH) is a section in a boiler where saturated steam from the steam drum is superheated to a moderately higher temperature before entering the high-temperature superheater stages. Positioned in areas with relatively lower flue gas temperatures, the LTSH helps improve thermal efficiency and reduces moisture content in steam. Due to constant exposure to abrasive flue gases and ash, LTSH tubes are prone to wear and require protective shielding, such as half round tube shields, to extend service life. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of 1Cr25Ni20Si2 Half Round Tube Shields, offering high-performance shielding solutions tailored for harsh, heat-intensive industrial environments. Chemical Composition of 1Cr25Ni20Si2 – Chromium-Nickel-Silicon Heat-Resistant Steel • Carbon (C): ≤ 0.10% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): 1.5 – 2.5% • Chromium (Cr): 24.0 – 27.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Applications: Suitable for high-temperature steam systems, where resistance to flue gas corrosion, thermal oxidation, and mechanical fatigue is essential. Uses • Protects LTSH tubes in thermal power plants from scaling and soot-induced wear • Shields heat exchanger tubes from low-temperature corrosive gases and ash deposition • Used in boilers and HRSGs exposed to fluctuating temperature and combustion by-products • Suitable for high-wear areas in biomass boilers and incineration systems • Enhances operational life of reheater and superheater coil sections Features • High thermal stability – Withstands temperature fluctuations without structural deformation • Excellent oxidation and carburization resistance – Ideal for extended high-temperature exposure • Custom fit – Designed according to specific tube radii and coil geometries for accurate alignment • Reduced maintenance – Shields tubes from damage, minimizing downtime and repair costs • Versatile installation – Compatible with weld-on, clamp-on, and banding installation techniques • Long service life – Resistant to scaling and degradation in heat-intensive environments Applications • power generation boilers – Provides long-term protection for LTSH coils in flue gas zones • WHRBs and HRSGs – Used in low-temperature convection sections to counteract erosive gas flow • chemical and refining industries – Prevents corrosion in heat exchangers handling acidic media • marine steam systems – Protects low-temperature sections exposed to salt-laden air and gases • waste-to-energy plants – Shields boiler tubing from high-volume particulate streams Conclusion The 1Cr25Ni20Si2 Half Round Tube Shield for LTSH Tube by Ladhani Metal Corporation – manufacturer, supplier, and exporter – is a high-performance component designed for superior protection of boiler tubes in corrosive and thermally aggressive environments. It ensures durability, thermal resistance, and long-term reliability in LTSH and similar service applications. For specifications, custom fabrication, or bulk orders, contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are specially engineered components used to safeguard boiler and heat exchanger tubes from damage due to high-temperature flue gases, particulate abrasion, and chemical scaling. Designed to fit over curved or straight tube surfaces, these shields are extensively used in power generation and industrial heating systems. The half-round design ensures streamlined installation and effective surface protection in high-wear regions. Cr25Ni20 Half Round Tube Shield for LTSH Tube The Cr25Ni20 Half Round Tube Shield is made from a high-temperature, high-chromium nickel alloy (containing approximately 25% chromium and 20% nickel) that offers superior resistance to oxidation, carburization, and sulfidation at elevated temperatures. This grade provides excellent mechanical stability and corrosion resistance, making it suitable for demanding environments such as Low Temperature Superheater (LTSH) zones in boilers. The Low Temperature Superheater (LTSH) is a section in a boiler where saturated steam from the steam drum is superheated to a moderately higher temperature before entering the high-temperature superheater stages. Positioned in areas with relatively lower flue gas temperatures, the LTSH helps improve thermal efficiency and reduces moisture content in steam. Due to constant exposure to abrasive flue gases and ash, LTSH tubes are prone to wear and require protective shielding, such as half round tube shields, to extend service life. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of Cr25Ni20 Half Round Tube Shields for LTSH systems, delivering heat- and corrosion-resistant solutions to enhance the durability of superheater tubes. Chemical Composition of Cr25Ni20 – High-Temperature Chromium-Nickel Alloy • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.50% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Applications: Ideal for LTSH tubes in environments where protection against thermal fatigue, ash erosion, and high-temperature oxidation is critical. Uses • Shields LTSH tubes in coal-fired boilers and HRSGs from ash particle abrasion and flue gas scaling • Protects tube bends and convection sections in waste heat recovery boilers (WHRBs) • Suitable for industrial boilers in petrochemical plants and refineries • Extends the life of tubes in steam generators used in corrosive and high-heat zones • Effective in biomass plants, waste incineration boilers, and marine heating systems Features • Exceptional heat resistance – High chromium and nickel content ensures reliable performance in high-temperature boiler zones • Superior oxidation and corrosion resistance – Suitable for flue gas streams with corrosive components • Custom fabrication – Manufactured to match exact tube diameter, length, and curvature requirements • Easy to install – Supports weld-on, clamp-on, or banding installation methods • Enhances tube longevity – Reduces wear from fly ash, soot, and gas flow • Low maintenance – Helps reduce downtime and operational costs in heat exchanger and boiler systems Applications • thermal power plants – Protects LTSH tube surfaces from thermal degradation and ash erosion • chemical processing units – Shields process heater tubes from acidic and oxidizing gases • WHRBs and HRSGs – Used in tube bends and lower convection sections for abrasion and heat protection • petrochemical refineries – Ensures long service life of tubes under cyclic temperature exposure • waste-to-energy plants – Minimizes scaling and wear from contaminated flue gases Conclusion The Cr25Ni20 Half Round Tube Shield for LTSH Tube by Ladhani Metal Corporation – manufacturer, supplier, and exporter – is a robust shielding solution for high-temperature, corrosion-prone environments in thermal and industrial boilers. Offering outstanding oxidation resistance, thermal stability, and structural integrity, these shields are designed to protect LTSH tubes and improve system efficiency and longevity. For technical support, sizing options, or order inquiries, contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are protective components designed to guard heat exchanger coils, boiler tubes, and superheater assemblies from erosion, high-temperature scaling, slag accumulation, and corrosion. These shields are vital in high-performance industrial systems, including power plants, refineries, and chemical process units. Their half-round shape allows easy installation on both straight and curved tubes, improving system longevity while minimizing downtime and maintenance frequency. 1Cr20Ni14Si2 U Type Inner Half Round Tube Shield The 1Cr20Ni14Si2 U Type Inner Half Round Tube Shield is manufactured using a high-temperature austenitic stainless steel alloy with enhanced chromium, nickel, and silicon content. This alloy delivers excellent oxidation resistance, thermal fatigue resistance, and structural stability at elevated temperatures. The inner U-type configuration is tailored to cover the inner arc of U-bend tubes, offering critical protection where high-velocity gas, turbulence, and slag deposits can rapidly wear or degrade tube surfaces. • Inner U Type Half Round Tube Shield – Designed to protect the inner curvature of U-bend tubes from scaling, erosion, and heat-related damage in thermal systems. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of 1Cr20Ni14Si2 U Type Inner Half Round Tube Shields, delivering high-performance shielding solutions for demanding high-temperature environments. Chemical Composition of 1Cr20Ni14Si2 – High Chromium-Nickel-Silicon Heat-Resistant Alloy • Carbon (C): ≤ 0.20% • Manganese (Mn): ≤ 1.50% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): 1.80 – 2.50% • Chromium (Cr): 19.0 – 21.0% • Nickel (Ni): 13.0 – 15.0% • Iron (Fe): Balance Applications: Ideal for continuous high-temperature operations involving oxidizing or sulfur-containing gases. Well-suited for applications requiring excellent heat resistance and minimal thermal deformation. Uses • Shields inner arcs of U-bend tubes in boilers and superheaters operating at elevated temperatures • Installed in WHRBs and HRSGs to prevent scaling, slag, and erosion in internal tube bends • Used in curved coils in reformers and process heaters exposed to hot gas and thermal cycling • Protects tube bends in chemical reactors, incinerators, and industrial furnaces from oxidation and surface degradation • Effective in systems where stability at high temperatures and resistance to carburizing and sulfidizing environments are essential Features • Excellent high-temperature performance – Withstands long-term exposure to temperatures exceeding 1000°C • Inner arc coverage – Precisely shields erosion-prone internal tube bends in critical heat transfer zones • Superior oxidation and scaling resistance – Resists corrosion in aggressive combustion gas atmospheres • Custom-fit design – Fabricated according to specified tube radii and diameters for optimal coverage and secure fit • Quick and secure installation – Compatible with clamping, banding, or tack welding methods • Long operational life – Reduces the frequency of tube failures, improving reliability and plant efficiency Applications • power plants – Installed on U-bend tubes in superheaters and reheaters facing continuous high-temperature service • petrochemical plants – Protects inner arcs of tubes in reformers and gas processing heat exchangers • waste heat recovery – Shields return bends in WHRBs and HRSGs exposed to hot flue gas and slag • thermal processing – Applied in furnaces and incinerators where hot combustion gases affect internal tube surfaces • chemical industry – Guards against oxidizing and corrosive gas damage in curved tube sections of reactors Conclusion The 1Cr20Ni14Si2 U Type Inner Half Round Tube Shield by Ladhani Metal Corporation – manufacturer, supplier, and exporter – is a robust and heat-resistant solution for protecting U-bend tubes in high-temperature and chemically aggressive conditions. Its high alloy composition, excellent thermal resistance, and customized fitment make it ideal for enhancing tube performance and reliability in critical thermal systems. For technical specifications, customized fabrication, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are designed to protect heat exchanger tubes, boiler coils, and superheater assemblies from erosion, scaling, and surface degradation in high-temperature and corrosive environments. These shields are used extensively in power plants, chemical processing units, and industrial heating systems. Their half-round construction enables fast and secure installation over both straight and curved tube surfaces, providing an effective barrier against damage from flue gas, slag, and particulate impact. SS 430 U Type Inner Half Round Tube Shield The SS 430 U Type Inner Half Round Tube Shield is manufactured from ferritic stainless steel grade 430, known for its good corrosion resistance, excellent thermal conductivity, and oxidation resistance. It performs reliably in moderate-temperature applications and provides dependable protection against scaling and surface deterioration. The inner U-type configuration is specifically engineered to cover the inside arc of U-bend tubes, which are particularly vulnerable to high-velocity gas flow and localized heat concentration. • Inner U Type Half Round Tube Shield – Covers the internal curvature of U-bend tubes to guard against turbulence-driven erosion, slag buildup, and scaling in thermal systems. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of SS 430 U Type Inner Half Round Tube Shields, offering reliable protection components for heat-exposed industrial systems. Chemical Composition of SS 430 – Ferritic Stainless Steel • Carbon (C): ≤ 0.12% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): ≤ 0.75% • Iron (Fe): Balance Applications: Suitable for moderately corrosive and oxidizing environments where high thermal conductivity and scaling resistance are required, especially in non-welded systems. Uses • Installed on inner arc of U-bend tubes in boiler and superheater coils subject to flue gas turbulence • Protects return bends in WHRBs and HRSGs from surface degradation and slag impact • Used in heat exchangers and process heaters with moderate corrosion and temperature exposure • Applied in thermal processing plants, food-grade heating systems, and chemical units • Effective for curved coil protection in dryers, economizers, and incinerator heat recovery sections Features • Good corrosion and oxidation resistance – Performs well in moderately aggressive environments • Inner arc coverage – Specifically shields areas affected by heat, scale, and turbulent flow • Cost-effective – Offers a balance between performance and affordability for general-purpose applications • Thermal stability – Maintains structural integrity at service temperatures up to 815°C • Custom-fabricated – Tailored to match specific tube bend radius and outer diameter for secure fit • Easy installation – Compatible with clamp-on, banding, or weld-on mounting for fast and efficient assembly Applications • power generation – Used in superheater and economizer return bends to prevent scale and erosion • chemical and food industry – Applied in heat recovery systems requiring corrosion-resistant inner arc protection • waste heat recovery – Installed in WHRB and HRSG curved tubes to reduce slag and flue gas impact • dryers and kilns – Shields inner U-bend tubes in rotating or stationary heating equipment • process heating units – Provides mechanical and thermal protection for tubes exposed to oxidizing gas streams Conclusion The SS 430 U Type Inner Half Round Tube Shield by Ladhani Metal Corporation – manufacturer, supplier, and exporter – is a reliable and economical solution for protecting the inner arcs of U-bend tubes in moderately corrosive and thermal environments. With its ferritic composition, good thermal performance, and ease of installation, it is ideal for general-purpose heat system applications. For technical assistance, customized dimensions, or quotations, please contact Ladhani Metal Corporation

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-fabricated protective components used to extend the life of boiler, superheater, and heat exchanger tubes exposed to extreme heat, flue gas erosion, scaling, and corrosive environments. These shields are installed on curved or straight sections of tubes, helping to prevent mechanical wear and oxidation damage while ensuring reliable performance in thermal power, petrochemical, and industrial heat recovery systems. The half-round structure offers a secure fit and easy installation, eliminating the need for system disassembly. SS 310 U Type Inner Half Round Tube Shield The SS 310 U Type Inner Half Round Tube Shield is made from high-temperature austenitic stainless steel grade 310, which contains elevated levels of chromium and nickel. This alloy provides excellent resistance to oxidation, scaling, and thermal fatigue at service temperatures up to 1100°C. The inner U-type configuration is specifically designed to shield the inner curvature of U-bend tubes, which are susceptible to accelerated degradation due to turbulence, corrosive combustion gases, and localized heat concentration. • Inner U Type Half Round Tube Shield – Covers the inside arc of U-bend tubes, offering robust protection against turbulent flow erosion, slag buildup, and high-temperature scaling. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of SS 310 U Type Inner Half Round Tube Shields, offering custom-built solutions for high-temperature tube protection in demanding process and energy systems. Chemical Composition of SS 310 – Austenitic High-Temperature Stainless Steel • Carbon (C): ≤ 0.25% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.50% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Applications: Ideal for high-temperature and oxidizing environments such as boilers, reformers, kilns, and heat exchangers where scaling, corrosion, and thermal stress are prevalent. Uses • Installed on inner arcs of U-bend tubes in power plant superheaters and reheaters exposed to extreme temperatures • Applied in return bends of steam reformers and heat exchangers handling oxidizing and acidic gases • Shields inner curves in waste heat recovery boilers (WHRBs) and heat recovery steam generators (HRSGs) • Used in chemical process units, incinerators, and high-temperature furnace systems • Suitable for curved tube coils in metallurgical, cement, and process gas heating applications Features • Excellent oxidation resistance – Performs at temperatures up to 1100°C without significant scaling • Inner arc protection – Guards against erosion and heat damage caused by turbulent flue gas flow • High structural stability – Maintains strength and surface integrity under thermal cycling and load conditions • Precision fit – Custom-engineered to match tube diameter and bend radius for secure, long-lasting placement • Easy installation – Can be attached using stainless bands, clamps, or tack welding methods • Extended service life – Minimizes tube replacement and reduces maintenance frequency in high-heat systems Applications • thermal and power plants – Protects U-bend tubes in superheaters from flame impingement and slag attack • petrochemical industries – Shields return bends in reformers and exchangers from high-temperature gas streams • waste heat recovery – Used in WHRBs and HRSGs to defend tube bends from scaling and erosion • high-temperature process plants – Provides inner arc coverage in systems handling oxidizing combustion byproducts • furnace systems – Installed in curved tube coils subjected to high radiant heat and thermal cycling Conclusion The SS 310 U Type Inner Half Round Tube Shield by Ladhani Metal Corporation – manufacturer, supplier, and exporter – is a high-performance shielding solution for protecting the inner bend of tubes operating under intense heat and oxidation stress. Designed for precise fitment and long-term durability, this shield is ideal for boilers, reformers, and heat exchangers in power generation, petrochemical, and industrial heating systems. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-manufactured components designed to protect boiler and heat exchanger tubes from erosion, scaling, slag deposition, and high-temperature corrosion. These shields are essential for ensuring the longevity of tubes in power plants, petrochemical units, and high-heat industrial systems where tubes are subjected to direct flame, abrasive particles, and corrosive gases. Their half-round form enables easy and secure installation over curved or straight tube sections. Cr25Ni20 U Type Outer Half Round Tube Shield The Cr25Ni20 U Type Outer Half Round Tube Shield is fabricated from a high-alloy austenitic stainless steel containing approximately 25% chromium and 20% nickel. This alloy offers exceptional oxidation resistance, thermal stability, and resistance to carburization and sulfidation at elevated temperatures. The outer U-type shield is specifically designed to cover the external arc of U-bend tubes in superheaters, reheaters, and reformers, where they are exposed to intense heat and reactive flue gases. • Outer U Type Half Round Tube Shield – Provides robust coverage to the outer curvature of U-bend tubes, protecting against flame impingement, slag erosion, and high-temperature corrosion. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of Cr25Ni20 U Type Outer Half Round Tube Shields, delivering high-performance tube protection for the most demanding thermal and chemical environments. Chemical Composition of Cr25Ni20 – High-Temperature Austenitic Stainless Steel • Carbon (C): ≤ 0.10% • Manganese (Mn): ≤ 1.50% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 2.00% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Applications: Ideal for extreme heat environments and oxidizing atmospheres such as furnaces, boilers, and process heaters requiring excellent scale resistance and thermal strength. Uses • Outer arc shielding of U-bend tubes in superheaters and reheaters in high-temperature thermal power plants • Protection of external bends in petrochemical heat exchangers and reformers exposed to high-temperature process gases • Coverage for U-bend tubes in waste heat recovery boilers and HRSGs operating under oxidizing and carburizing gas flows • Applied in radiant coils and return bends in industrial furnaces and incinerators exposed to direct flame and slag • Suitable for chemical and gas processing applications where metal surfaces face extreme temperature and thermal fatigue Features • Exceptional high-temperature performance – Resists scaling, oxidation, and deformation at temperatures above 1100°C • Superior corrosion resistance – High chromium and nickel content provide defense against aggressive gas attacks • Targeted outer arc protection – Guards the most exposed section of U-bend tubes from slag, heat, and particulate damage • Precision engineered – Manufactured to custom tube diameter and radius for tight and vibration-free installation • Easy installation – Designed for quick mounting using clamps, tack welds, or stainless steel banding • Long-term durability – Reduces tube replacement frequency and enhances system efficiency in harsh operating conditions Applications • thermal and captive power plants – Installed on outer arcs of U-bend tubes in boilers, superheaters, and reheaters • petrochemical and refinery systems – Shields tubes in steam reformers and process heaters subjected to extreme temperatures • waste heat recovery boilers – Protects tube bends in HRSGs and WHRBs from scale, oxidation, and thermal fatigue • metallurgical and cement industries – Applied in radiant tubes and hot gas ducts exposed to slag, dust, and intense flame • high-temperature chemical plants – Used in reactors and cracking units where resistance to carburizing and oxidizing gases is essential Conclusion The Cr25Ni20 U Type Outer Half Round Tube Shield by Ladhani Metal Corporation—manufacturer, supplier, and exporter—is a high-performance protective component for U-bend tubes exposed to severe thermal and chemical stresses. With outstanding heat resistance, oxidation protection, and structural integrity, it ensures long-term tube life and efficient performance in boilers, heat exchangers, and reformers across thermal, petrochemical, and industrial sectors. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered protective components designed to guard boiler and heat exchanger tubes from erosion, slag buildup, scaling, and high-temperature corrosion. These shields are widely used in power plants, petrochemical units, and thermal systems where tubes are exposed to hot gases, mechanical wear, and corrosive media. Their half-round structure ensures a secure fit over straight or curved tube sections, extending operational life and reducing tube failure. 1Cr18Ni9Ti U Type Outer Half Round Tube Shield The 1Cr18Ni9Ti U Type Outer Half Round Tube Shield is manufactured using a titanium-stabilized austenitic stainless steel known for its excellent corrosion resistance, high-temperature performance, and resistance to intergranular corrosion. This outer U-type shield is specifically designed to protect the external arc of U-bend tubes in boilers, heat exchangers, and superheaters where surface exposure to oxidizing gases and abrasive particles is common. Titanium stabilization improves weldability and structural integrity in high-temperature environments. • Outer U Type Half Round Tube Shield – Shields the outer curve of U-bend tubes from direct flame impingement, gas flow erosion, slag accumulation, and high-heat oxidation. Ladhani Metal Corporation is a reputable manufacturer, supplier, and exporter of 1Cr18Ni9Ti U Type Outer Half Round Tube Shields, offering durable and thermally stable solutions for critical industrial systems. Chemical Composition of 1Cr18Ni9Ti – Titanium-Stabilized Austenitic Stainless Steel • Carbon (C): ≤ 0.12% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 17.0 – 19.0% • Nickel (Ni): 8.0 – 11.0% • Titanium (Ti): ≥ 5 × C content • Iron (Fe): Balance Applications: Suitable for high-temperature, oxidizing, and corrosive environments where intergranular corrosion resistance and weldability are critical. Uses • Protection of outer U-bend surfaces in superheaters and reheaters of thermal and nuclear power plants • Shielding external arcs in waste heat recovery boilers (WHRBs) and HRSGs exposed to hot flue gases and ash particles • Applied in return bends of heat exchangers and reformers handling oxidizing and sulfur-bearing gases • Suitable for marine, petrochemical, and high-pressure steam systems requiring resistance to heat-induced corrosion • Used in welded applications where post-weld corrosion resistance and long-term structural stability are necessary Features • Excellent intergranular corrosion resistance – Titanium addition stabilizes carbon, preventing carbide precipitation during welding • High-temperature strength – Maintains structural integrity and oxidation resistance up to 850–900°C • Outer U-bend protection – Shields the most exposed and vulnerable arc from flame, thermal stress, and erosion • Precision engineering – Manufactured to exact tube radii and dimensions for a secure, movement-free installation • Easy to install – Can be mounted with clamps, stainless steel bands, or tack welds without dismantling the system • Long operational life – Reduces tube wear and thermal damage, improving overall system reliability Applications • power generation – Installed in superheater and reheater return bends exposed to thermal cycling and flue gas erosion • petrochemical plants – Protects U-bend tubes in reformers and exchangers from high-temperature and chemical degradation • waste heat recovery – Used in WHRBs and HRSGs to shield against slag buildup, scale formation, and high-velocity gas impact • marine and offshore systems – Suitable for condensers and heat exchangers exposed to salt-laden, oxidizing environments • industrial furnaces – Applied to radiant coils and return bends exposed to sustained heat and direct flame Conclusion The 1Cr18Ni9Ti U Type Outer Half Round Tube Shield by Ladhani Metal Corporation—manufacturer, supplier, and exporter—is a robust and thermally stable solution for protecting U-bend tube outer arcs in high-temperature and corrosive environments. With superior resistance to intergranular corrosion, oxidation, and thermal fatigue, this shield is ideal for boilers, heat exchangers, and petrochemical equipment requiring long-term protection and reliable performance. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered components used to protect heat exchanger and boiler tubes from erosion, scaling, slag buildup, and high-temperature oxidation. These shields are commonly applied in thermal and industrial systems where tubes are exposed to flue gases, particulate flow, and repeated thermal cycling. The half-round design ensures secure and efficient coverage over straight or curved tube sections, reducing maintenance needs and enhancing tube lifespan. SS 430 U Type Outer Half Round Tube Shield The SS 430 U Type Outer Half Round Tube Shield is fabricated from SS 430, a ferritic stainless steel known for its good corrosion resistance, oxidation resistance, and excellent formability. This outer U-type shield is specifically designed to protect the outer arc of U-bend tubes in boilers, heat exchangers, and recovery systems. SS 430 is highly resistant to stress corrosion cracking and scaling in mildly corrosive and high-temperature environments, making it a cost-effective solution for less aggressive service conditions. • Outer U Type Half Round Tube Shield – Shields the outer curvature of U-bend tubes against heat, slag, soot erosion, and surface oxidation from flue gases. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of SS 430 U Type Outer Half Round Tube Shields, offering dependable protection for boiler and exchanger tube bends in moderate-temperature industrial environments. Chemical Composition of SS 430 – Ferritic Stainless Steel • Carbon (C): ≤ 0.12% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): ≤ 0.75% • Iron (Fe): Balance Applications: Ideal for moderate-temperature, mildly corrosive environments where oxidation resistance and mechanical durability are required. Uses • Outer bend protection of U-tubes in reheaters and superheaters in thermal power generation systems • Shielding of external arcs in waste heat recovery units and heat exchangers exposed to dry or clean flue gases • Coverage of U-bend tubes in utility boilers and economizers with low chloride or sulfuric gas exposure • Suitable for food processing and clean air systems requiring stable performance under elevated temperatures • Used in systems where stress corrosion cracking resistance and cost-effective shielding are priorities Features • Good corrosion and oxidation resistance – Chromium-rich alloy resists surface oxidation and rust formation at elevated temperatures • Outer arc coverage – Provides mechanical and thermal shielding for the most exposed curve of U-bend tubes • Thermal stability – Performs reliably in temperatures up to 815°C with good resistance to scaling and heat stress • Easy installation – Can be mounted using clamps, banding, or tack welding without requiring disassembly of the system • Precision fit – Custom-fabricated to fit specific tube diameters and radii, ensuring secure, movement-free installation • Economical solution – Offers dependable performance at a lower cost compared to austenitic stainless steels Applications • thermal and captive power plants – Installed on U-bend outer arcs in superheaters and economizers exposed to moderate flue gases • heat recovery systems – Shields bends in WHRB and HRSG systems operating under low-corrosive and oxidizing conditions • general industrial boilers – Protects tube surfaces from surface scaling and minor gas abrasion • process industries – Suitable for clean air and low-chloride gas systems in the food, paper, or light chemical sectors • HVAC and ventilation systems – Used in exhaust and heating systems requiring corrosion-resistant but cost-effective shielding Conclusion The SS 430 U Type Outer Half Round Tube Shield by Ladhani Metal Corporation—manufacturer, supplier, and exporter—is a cost-effective and reliable protective component for U-bend tube outer surfaces in industrial systems. With good oxidation resistance, structural integrity under moderate heat, and easy installation, it is ideal for power plants, recovery systems, and clean process industries where durable but economical shielding is required. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation