Ladhani Metal Corporation offers SS 310S Half Round Tube Shields specifically designed to protect reheater (R/H) tubes in boilers, power plants, and industrial steam systems. Reheater tubes carry steam through the reheater section of the boiler, where the steam is reheated after partial expansion in the high-pressure turbine to improve efficiency and prevent moisture formation. Manufactured from low-carbon austenitic stainless steel grade SS 310S, these shields provide exceptional resistance to oxidation, scaling, and carburization at elevated temperatures while minimizing the risk of sensitization during welding. Function of R/H Tubes • Carry steam through the reheater section of the boiler • Exposed to very high temperatures (often > 540°C) and erosion from flue gases • Often protected with Half Round Tube Shields in high-velocity and abrasive gas flow zones Ladhani Metal Corporation manufactures, supplies, and exports SS 310S Half Round Tube Shields in multiple lengths, diameters, and thicknesses, serving both domestic and international markets. SS 310S Grade Chemical Composition – Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.50% • Chromium (Cr): 24.00 – 26.00% • Nickel (Ni): 19.00 – 22.00% • Iron (Fe): Balance Applications: Suitable for reheater sections in thermal power plants, waste heat recovery boilers (WHRBs), and heat recovery steam generators (HRSGs) exposed to severe oxidation, scaling, and high-velocity erosive flue gas conditions. Uses • Protects reheater tubes from erosion, oxidation, and soot blower damage • Shields R/H tubes in high-temperature, high-velocity flue gas zones • Extends operational life of steam circuit components under extreme conditions • Applicable in utility boilers, WHRBs, HRSGs, and petrochemical heaters Features • Excellent high-temperature oxidation resistance – Performs continuously up to 1100°C • Superior scaling resistance – Maintains integrity under cyclic heating and cooling • Low-carbon content – Minimizes sensitization and carbide precipitation during welding • Precision-engineered fit – Matches exact tube curvature for optimal coverage Applications • Power generation boilers – Long-term reheater tube protection under severe service • Waste heat recovery systems – Guards against high-velocity particle erosion • Industrial steam plants – Reliable in fluctuating thermal cycles • Petrochemical furnaces – Effective in aggressive reheating environments Conclusion The SS 310S Half Round Tube Shield for Reheater (R/H) Tubes by Ladhani Metal Corporation offers long-lasting, high-temperature, and oxidation-resistant protection for tubes in extreme operating conditions. Designed for a precise fit and superior durability, these shields reduce wear, extend equipment life, and are available in a wide range of export-ready specifications. For technical details and supply inquiries, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #HalfRoundReheaterShield #ReheaterTubeShield #BoilerReheaterProtection #PowerPlantTubeShield #BoilerErosionShield #SteamBoilerTubeShield #HighTempTubeShield

Ladhani Metal Corporation offers SS 310S Boiler Half Round Tube Shields designed for protecting straight boiler and heat exchanger tubes in high-temperature and oxidizing environments. SS 310S is a low-carbon version of SS 310, providing improved weldability and reduced risk of sensitization while maintaining excellent high-temperature strength and resistance to oxidation. These shields are ideal for applications such as power boilers, furnaces, HRSGs, and heat recovery units operating at elevated temperatures up to 1100°C. The shield is formed with a precise half-round profile to ensure tight contact with the outer surface of the tube, delivering effective mechanical protection against soot blower erosion, ash abrasion, and thermal cycling. SS 310S shields are engineered to maintain dimensional stability and corrosion resistance even after prolonged exposure to intense heat. Ladhani Metal Corporation manufactures, supplies, and exports SS 310S Boiler Half Round Tube Shields in various diameters, lengths, and thicknesses to suit diverse boiler system configurations across global markets. SS 310S Grade Chemical Composition – Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.50% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Applications: Ideal for high-temperature boilers, flue gas systems, superheaters, and industrial heating units operating in oxidizing and mildly reducing conditions. Uses • Protection of straight tubes in high-temperature steam and flue gas paths • Installed in superheater and reheater sections of utility boilers • Prevents tube scaling and erosion in thermal power systems • Used in waste heat recovery boilers and furnace wall protection • Suitable for corrosive gas environments in petrochemical and metallurgical units Features • Superior oxidation resistance – Maintains integrity under prolonged thermal exposure • Low carbon content – Reduces risk of sensitization after welding • High thermal stability – Withstands fluctuating heat without deformation • Precision-engineered fit – Half-round profile ensures close tube contact • Flexible installation – Suitable for clamping, welding, or banding • Global compatibility – Export-ready and customizable to international standards Applications • Power generation – Shields boiler tubes in high-heat zones • Petrochemical plants – Used in corrosive, oxidizing, and carburizing atmospheres • Refineries and steel mills – Withstands aggressive thermal conditions • Industrial furnaces – Provides extended service life in extreme environments Conclusion The SS 310S Boiler Half Round Tube Shield from Ladhani Metal Corporation is a high-performance solution for tube protection in high-temperature and oxidizing conditions. With enhanced weldability, corrosion resistance, and thermal durability, SS 310S shields are ideal for critical boiler and process heat systems. For technical support, custom dimensions, or export orders, contact Ladhani Metal Corporation.

Ladhani Metal Corporation offers high-performance SS 310S Outer Half Round 90 Degree Bend Tube Shields—engineered to protect the outer curvature of 90-degree bends and U-bend sections in boilers, superheaters, HRSGs, and heat exchangers. Made from austenitic stainless steel grade SS 310S, a low-carbon variant of SS 310, these shields deliver exceptional resistance to oxidation, sulfidation, and thermal scaling while minimizing the risk of sensitization during welding. They are the preferred choice in environments with elevated temperatures, fluctuating thermal loads, and corrosive flue gases. Designed with a semi-cylindrical geometry, each shield conforms precisely to the external arc of curved tubes, forming a robust physical barrier against ash erosion, soot-blower impact, and high-velocity gas flow. Ladhani Metal Corporation, a trusted manufacturer, supplier, and exporter, provides fully customizable SS 310S tube shields to suit client-specific coil configurations and industrial standards. SS 310S Grade Chemical Composition – Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.50% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Applications: Suited for high-temperature and corrosive environments where outer U-bend protection is essential—such as thermal power plants, WHRBs, and steam generation systems. Uses • Protection of 90-degree and U-bend tube curves in boilers and reheaters • Shields return bends in HRSGs, WHRBs, and exhaust flue systems • Applied in steam reformers, petrochemical heaters, and thermal oxidizers • Guards tubes from scaling, oxidation, and erosion in high-temperature zones Features • Low carbon content – Reduces the risk of carbide precipitation and sensitization • High-temperature capability – Retains strength and corrosion resistance up to 1100°C • Oxidation and sulfidation resistance – Suitable for flue gas and high-sulfur fuel exposure • Precision fit – Engineered to match bend radii and tube diameters accurately • Flexible installation – Clamp-on, weld-on, or banded methods available • Custom fabrication – Offered in varied lengths, thicknesses, and alloy specs Applications • Power generation plants – Extends life of curved tubes exposed to combustion gases • Refineries – Protects tube bends in process heaters and convection zones • WHRBs and HRSGs – Preserves tube integrity in exhaust gas circuits • Chemical and fertilizer plants – Resists attack from aggressive flue gas compounds Conclusion The SS 310S Outer Half Round 90 Degree Bend Tube Shield by Ladhani Metal Corporation is an ideal solution for shielding curved tubes under severe thermal and corrosive stress. Its superior resistance to high temperatures, oxidation, and weld-related degradation ensures long-lasting protection and operational efficiency in industrial boilers and heat recovery systems. For custom sizing, material selection, or technical specifications, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #halftubeshield #utypehalftubeshield #tubeshieldexporter

SS 310S Half Round Straight Tube Shield Half Round Tube Shield Ladhani Metal Corporation manufactures SS 310S Half Round Straight Tube Shields designed to protect straight boiler and heat exchanger tubes from high-temperature oxidation, corrosion, and mechanical erosion. SS 310S is a low-carbon version of SS 310, offering enhanced weldability and resistance to sensitization during thermal exposure. These shields are especially suited for harsh environments involving continuous or cyclic high heat, making them ideal for industrial boilers, fired heaters, and heat recovery systems. SS 310S Half Round Straight Tube Shield The SS 310S Half Round Straight Tube Shield is fabricated to tightly fit over straight tube surfaces, offering durable protection in thermal processing units. Its resistance to scaling at temperatures up to 1100°C and excellent mechanical strength under elevated temperatures makes it reliable for shielding heat-affected tubes. With easy installation methods such as tack welding, clamping, or banding, these shields minimize downtime and maintenance in critical operations. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of SS 310S Half Round Straight Tube Shields, offering custom solutions to meet the demanding conditions of thermal power plants, petrochemical facilities, and steam reformers. Material Grade SS 310S – Austenitic stainless steel with low carbon content and superior heat and oxidation resistance. Chemical Composition of SS 310S • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.50% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Applications: Recommended for continuous high-temperature service in aggressive gas environments, especially where welding and corrosion resistance are key. Uses • Shielding straight tubes in superheaters, reheaters, and steam coil systems • Protection against flue gas erosion in waste heat boilers • Heat shielding in fired process heaters and refinery furnaces • Lining straight tube segments in chemical and fertilizer heat exchangers • Defending against scaling and surface degradation in steam reformers Features • Low carbon for better weldability – Prevents sensitization and intergranular corrosion • High resistance to scaling – Maintains integrity under continuous exposure to extreme heat • Durable and long-lasting – Withstands mechanical and thermal fatigue • Available in custom sizes – Fabricated to match exact tube diameters and operating conditions • Quick installation – Compatible with standard weld-on, clamp-on, or banded attachment methods • High service life – Reduces tube wear and lowers maintenance frequency Applications • power generation – Installed on straight boiler tubes in areas with high thermal load and flue gas flow • refineries – Protects tubes in process heaters from oxidation and heat-related damage • petrochemical plants – Used in straight sections of heat exchangers and reformer coils • WHRB systems – Improves durability of tubes in gas turbine exhaust recovery units • fertilizer industry – Extends lifespan of tube sections exposed to acidic and high-temperature gas streams Conclusion The SS 310S Half Round Straight Tube Shield from Ladhani Metal Corporation provides superior protection in high-temperature environments, offering excellent oxidation resistance, long-term structural performance, and easy adaptability. Its low carbon content makes it suitable for welded applications where corrosion resistance must be preserved. Engineered for precision and performance, this shield is a reliable choice for heavy-duty thermal systems. For technical assistance, custom orders, or quotes, contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are protective components engineered to shield boiler tubes, superheaters, and heat exchangers from erosion, scaling, and ash impact. These shields are widely used in thermal power plants, industrial steam systems, and waste heat recovery units to prolong tube life and enhance operational reliability. Their semi-cylindrical shape allows for easy installation over exposed tube surfaces, especially in zones exposed to abrasive flue gases and thermal stress. SS 310S Half Round Tube Shield for LTSH Tube The SS 310S Half Round Tube Shield is manufactured from low-carbon austenitic stainless steel grade 310S. With high chromium and nickel content, it offers excellent resistance to oxidation and scaling at elevated temperatures, while its reduced carbon level enhances weldability and reduces the risk of sensitization. This makes it ideal for Low Temperature Superheater (LTSH) applications, where tubes are exposed to flue gas streams, ash particles, and moderate thermal cycling. The Low Temperature Superheater (LTSH) is a section in a boiler where saturated steam from the steam drum is superheated to a moderately higher temperature before entering the high-temperature superheater stages. Positioned in areas with relatively lower flue gas temperatures, the LTSH helps improve thermal efficiency and reduces moisture content in steam. Due to constant exposure to abrasive flue gases and ash, LTSH tubes are prone to wear and require protective shielding, such as half round tube shields, to extend service life. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of SS 310S Half Round Tube Shields for LTSH tubes, offering high-performance shielding solutions for long-term service in boiler and heat recovery systems. Chemical Composition of SS 310S – Low Carbon Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.50% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Applications: Suitable for areas with exposure to moderate temperatures, oxidizing gases, and ash deposition where high-temperature strength and corrosion resistance are critical. Uses • Protects LTSH tubes in power boilers from ash erosion, soot impact, and flue gas corrosion • Used in convection zones of HRSGs, economizers, and waste heat recovery units • Shields tube surfaces in steam generation systems exposed to gas turbulence and thermal cycling • Effective in industrial heating systems and chemical boilers facing scale formation and heat stress • Enhances durability of tubes in coal-fired and biomass-fired boilers with fly ash carryover Features • Excellent oxidation and scaling resistance – Performs in oxidizing environments and thermal zones • Superior weldability – Low carbon content minimizes risk of intergranular corrosion during welding • Tailored protection – Custom-fabricated to match tube diameter, bend radius, and system layout • Simple installation – Compatible with clamping, banding, or welding methods for quick setup • Extended tube life – Minimizes erosion and surface degradation, reducing maintenance downtime • Available in various lengths and thicknesses per system requirements Applications • thermal power plants – Installed on LTSH tube banks for long-term protection against erosion and corrosion • waste heat recovery boilers – Shields curved tubes in return flow zones with ash-laden flue gas • petrochemical units – Applied on steam coils and heat exchanger tubes operating under oxidizing gas exposure • utility boilers – Protects superheater tubes from scaling and particulate impact in low-temperature sections • industrial boiler systems – Enhances performance and service life of steam tubes in energy recovery zones Conclusion The SS 310S Half Round Tube Shield for LTSH Tube by Ladhani Metal Corporation – manufacturer, supplier, and exporter – offers reliable protection for superheater tubes operating in low-temperature, oxidizing, and abrasive flue gas environments. With enhanced weldability, high-temperature resistance, and custom-fit fabrication, this shield ensures dependable performance across a wide range of thermal and industrial applications. For technical assistance, tailored designs, or quotation requests, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are engineered to protect heat exchanger, boiler, and superheater tubes from erosion, thermal scaling, and high-temperature corrosion. These shields are widely used in power plants, petrochemical systems, and high-temperature industrial equipment where tubes are exposed to direct flame, turbulent gas flow, and particulate matter. Their half-round shape ensures easy installation over curved or straight tube surfaces, providing an effective layer of protection without the need for equipment disassembly. SS 310S U Type Inner Half Round Tube Shield The SS 310S U Type Inner Half Round Tube Shield is made from stainless steel grade 310S, a low-carbon variant of SS 310. It offers excellent resistance to oxidation and high-temperature corrosion while providing improved weldability and reduced risk of sensitization during thermal cycling. This inner U-type shield is specifically designed to cover the inside arc of U-bend tubes, an area commonly affected by accelerated wear due to turbulence, heat concentration, and gas flow deflection. • Inner U Type Half Round Tube Shield – Designed to protect the inner curvature of U-bend tubes from erosion, slag buildup, and oxidation caused by high-velocity gas flow and thermal cycling. Ladhani Metal Corporation is a recognized manufacturer, supplier, and exporter of SS 310S U Type Inner Half Round Tube Shields, providing tailored solutions for heat-exposed systems in demanding industrial environments. Chemical Composition of SS 310S – Low Carbon Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.50% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Applications: Best suited for oxidizing and high-temperature environments where welded structures are used and resistance to thermal fatigue is critical. Uses • Inner arc shielding for U-bend tubes in high-temperature boilers and superheaters • Installed in the return bends of HRSGs and waste heat recovery boilers (WHRBs) • Used in curved sections of heat exchangers exposed to combustion gases and fluctuating heat • Protects tube bends in petrochemical reactors, reformers, and process furnaces • Ideal for inner arc protection in high-temperature flue gas zones and incinerator coils Features • Excellent high-temperature oxidation resistance – Effective performance in environments up to 1050°C • Low carbon content – Reduces risk of intergranular corrosion after welding or extended service • Focused protection – Shields the inner bend surface most prone to gas turbulence and scaling • Accurate fitment – Custom-fabricated to match specific tube sizes and radii for optimal coverage • Fast installation – Can be securely mounted using stainless steel clamps, bands, or welds • Reliable performance – Enhances the lifespan of U-bend tubes and minimizes maintenance in heat-affected areas Applications • power plants – Used on U-bend inner surfaces in superheaters and reheaters to resist scale and corrosion • petrochemical industry – Shields inside tube arcs in reformers and exchangers exposed to hot process gases • waste heat systems – Protects internal tube bends in WHRBs and HRSGs from slag and thermal fatigue • chemical plants – Provides corrosion protection for return bends in reactors and condensers • high-temperature industrial units – Installed in curved tube coils subjected to flame exposure and oxidizing gases Conclusion The SS 310S U Type Inner Half Round Tube Shield by Ladhani Metal Corporation – manufacturer, supplier, and exporter – is a dependable, high-temperature protective solution for shielding the inner arc of U-bend tubes. With its excellent oxidation resistance, low carbon content, and suitability for welded environments, this shield is ideal for critical systems operating under thermal stress and corrosive gas flow. For technical consultation, custom fabrication, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered components used to protect boiler and heat exchanger tubes from erosion, scaling, and high-temperature corrosion. These shields are widely applied in industrial systems exposed to thermal cycling, aggressive gases, and particulate flow. Their half-round shape allows for simple and secure installation over straight or curved tube surfaces, extending tube life and reducing maintenance needs. SS 310S U Type Outer Half Round Tube Shield The SS 310S U Type Outer Half Round Tube Shield is designed using SS 310S, a low-carbon austenitic stainless steel known for its excellent resistance to oxidation, high-temperature strength, and enhanced weldability. This outer U-type shield is specifically engineered to cover and protect the outer arc of U-bend tube sections in superheaters, reheaters, waste heat recovery systems, and high-temperature heat exchangers. With its high chromium and nickel content, SS 310S provides superior performance in oxidizing and carburizing environments while maintaining structural stability during prolonged thermal cycling. • Outer U Type Half Round Tube Shield – Shields the external curvature of U-bend tubes from slag deposition, hot gas erosion, scale formation, and high-temperature fatigue. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of SS 310S U Type Outer Half Round Tube Shields, offering high-performance solutions for critical thermal and process applications across industries. Chemical Composition of SS 310S – Low-Carbon Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.50% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Applications: Best suited for high-temperature, oxidizing, and carburizing environments where thermal stability, scale resistance, and corrosion protection are essential. Uses • Outer surface protection of U-bend tubes in superheaters and reheaters of thermal and industrial power plants • Shielding of return bends in petrochemical reformers, process heaters, and high-temperature exchangers • Applied to outer arcs in WHRBs and HRSGs subjected to thermal cycling, slag erosion, and hot flue gas exposure • Suitable for use in chemical and gas processing units handling oxidizing or acidic exhausts at elevated temperatures • Ideal for incinerator tubes, radiant coils, and furnace bends operating under continuous or cyclic heat conditions Features • Outstanding high-temperature strength – Performs effectively up to 1150°C with excellent resistance to scaling and oxidation • Enhanced weldability – Low carbon content minimizes the risk of sensitization and intergranular corrosion after welding • Outer U-bend coverage – Designed for targeted protection where erosion and thermal impact are most severe • Precision fitment – Manufactured to exact tube radius and diameter specifications for tight, vibration-free installation • Quick installation – Easily mounted using clamps, tack welds, or stainless steel banding without system disassembly • Long-term durability – Resistant to cracking, scaling, and corrosion under thermal fatigue, reducing maintenance and downtime Applications • thermal power plants – Installed on U-bend tube outer curves in superheaters and reheaters for oxidation and erosion protection • petrochemical plants – Used in reformers and cracking furnaces exposed to high-temperature and oxidizing environments • waste heat recovery systems – Protects return bends in WHRBs and HRSGs from hot gas flow, slag buildup, and scaling • chemical and gas processing – Shields bends in high-temperature exchangers and preheaters from corrosive and oxidizing media • furnaces and industrial incinerators – Applied to radiant tubes and burner bends subjected to direct flame and thermal cycling Conclusion The SS 310S U Type Outer Half Round Tube Shield by Ladhani Metal Corporation—manufacturer, supplier, and exporter—is a premium solution for protecting U-bend tube outer arcs in boilers and heat exchangers exposed to severe heat and gas flow conditions. With excellent oxidation resistance, low carbon content for improved weldability, and precision design for long-lasting performance, this shield enhances the lifespan and reliability of thermal systems across a wide range of industrial sectors. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered protective sleeves designed to prevent wear, oxidation, and erosion of boiler and heat exchanger tubes. These shields enhance the durability and reliability of tubing systems exposed to high temperatures, flue gases, and mechanical abrasion. Their half-round structure allows easy installation and targeted protection without disrupting the tube layout. SS 310S U Type Half Round Tube Shield The SS 310S U Type Half Round Tube Shield is specifically designed for protecting curved (U-bend) and adjoining straight sections of tubes in boilers, superheaters, and heat exchangers. Made from SS 310S, a low-carbon variation of stainless steel 310, this shield offers superior resistance to high-temperature oxidation and intergranular corrosion, especially in welded structures. The U-shaped profile ensures a snug fit over return bends, where thermal fatigue and erosion are most severe. Shields are available in both inner and outer U configurations to provide full protection. • Outer U Type Half Round Tube Shield – Covers the external curvature of U-bend tubes, shielding against heat, slag, and gas erosion. • Inner U Type Half Round Tube Shield – Protects the internal arc of the bend from turbulence, hot spots, and corrosive attack. Ladhani Metal Corporation is a reputed manufacturer and exporter of SS 310S U Type Half Round Tube Shields, offering reliable tube protection solutions tailored to industry-specific needs. Chemical Composition of SS 310S – Low Carbon Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.50% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Applications: Well-suited for high-temperature operations involving welding or thermal cycling where resistance to oxidation and intergranular corrosion is critical. Uses • U-bend protection in superheater and reheater coil loops • Furnace coil shielding in petrochemical and refining systems • High-temperature tube bend coverage in WHRBs and HRSGs • Erosion protection for tube bends in steam reformers and reactors • Surface preservation in boilers, incinerators, and cement kilns Features • High-temperature performance – Made from SS 310S, offering excellent resistance to oxidation, scaling, and thermal corrosion in environments up to 1100°C. • Low carbon advantage – Reduced carbon content minimizes the risk of intergranular corrosion after welding, ideal for high-temperature welded structures. • Complete U-bend protection – Available in inner and outer U-type configurations to shield both sides of the tube bend from erosion and heat damage. • Accurate fitment – Custom-formed to the exact tube radius and diameter for a snug, secure fit that resists vibration and thermal stress. • Durable under thermal cycling – Maintains shape and mechanical strength under repeated heating and cooling, reducing the chance of failure. • Multiple finish options – Supplied in pickled, passivated, or bright annealed finishes to enhance surface resistance and service life. • Easy installation – Designed for simple on-site clamping, welding, or banding without disassembling existing tube arrangements. • Fully customizable – Available in various thicknesses, lengths, and radii to match specific boiler, exchanger, or furnace system requirements. Applications • thermal power plants – Used to protect U-bend tubes in superheaters and reheaters. Ensures resistance to scaling, oxidation, and high flue gas temperatures. • petrochemical refineries – Shields return bends in reformers and heat exchangers. Maintains performance under carburizing and oxidizing conditions. • waste heat recovery systems (WHRBs) – Guards curved tubes against ash, slag, and gas turbulence. Increases tube life in high-temperature waste gas environments. • chemical and fertilizer plants – Used in high-temperature reactors and ammonia processing lines. Prevents tube damage from corrosive gases and thermal fatigue. • HRSGs and boilers – Installed on coil bends in steam generator systems. Enhances system reliability under rapid heating and cooling cycles. Conclusion The SS 310S U Type Half Round Tube Shield by Ladhani Metal Corporation is engineered for long-term performance in high-temperature, corrosive, and welded environments. With its low carbon content and excellent resistance to oxidation, it is ideal for protecting curved tube sections in critical systems. Designed for easy installation and custom fit, these shields extend the service life of boiler and exchanger tubes while minimizing maintenance. As a trusted manufacturer and exporter, Ladhani Metal Corporation delivers tube protection solutions tailored to your application. For specifications, material selection, or custom inquiries, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered protective components designed to shield exposed tubes in boilers, heat exchangers, and furnaces from erosion, corrosion, and high-temperature damage. These shields are vital in extending equipment life and minimizing unplanned maintenance in industrial systems operating under extreme heat and pressure. SS 310S Half Round Tube Shield The SS 310S Half Round Tube Shield is a semi-cylindrical cover manufactured from high-quality stainless steel grade 310S. It is specifically designed for high-temperature environments where oxidation, scaling, and corrosive gas exposure are common. The “S” in SS 310S indicates lower carbon content than standard SS 310, which improves weldability and reduces the risk of carbide precipitation during welding and high-temperature exposure. The half-round profile allows easy installation over the tube surface, ensuring a tight fit and reliable protection across thermal cycles and mechanical stresses. Chemical Composition of SS 310S – Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.50% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Uses • Boiler Tube Protection – Protects boiler tubes from flue gas corrosion, abrasive wear, and scaling in high-temperature zones, especially in coal-fired and biomass plants. • Heat Exchanger Tube Shielding – Prevents erosion and chemical attack in steam and process gas exchangers, maintaining thermal efficiency. • Furnace Tube Protection – Shields tubes from direct flame impingement and high thermal loads in industrial furnaces, kilns, and incinerators. • Petrochemical and Refining Operations – Guards tubes in reformers, crackers, and reactors from carburization and oxidation in aggressive processing environments. • Superheater and Reheater Systems – Provides robust protection to tubes exposed to extreme thermal stress in high-pressure steam circuits. Features • High-Temperature Resistance – SS 310S withstands temperatures up to 1100°C continuously, making it suitable for severe service conditions. • Low Carbon Content – Enhanced weldability and reduced risk of intergranular corrosion during or after welding processes. • Half-Round Design – Engineered for precise fitment over existing tubes, allowing efficient installation and tube surface coverage. • Corrosion and Oxidation Resistance – Excellent resistance to high-temperature oxidizing environments and thermal scaling. • Custom Options – Available in multiple lengths, thicknesses, diameters, and with various mounting or clamping configurations. • Surface Finishes – Offered in pickled, passivated, and bright annealed finishes to match system requirements and aesthetics. Applications • Thermal Power Plants – Shields boiler tubes from soot blowers, slag, and hot gas erosion in economizers and superheaters. • Refineries and Petrochemical Plants – Applied to tubes in cracking furnaces and heat recovery systems to resist high-temperature corrosion. • Heat Recovery Steam Generators (HRSGs) – Enhances tube life in combined-cycle systems where exhaust gases impact tube bundles. • Chemical Processing Facilities – Protects process tubes in aggressive thermal and chemical environments including acid and gas streams. • Industrial Boilers and Steam Systems – Ensures longevity of steam lines and tubing in high-pressure, high-temperature operations across various sectors. • Marine and Offshore Installations – Withstands corrosive sea air and high thermal loads in shipboard and platform boiler systems. Conclusion The SS 310S Half Round Tube Shield by Ladhani Metal Corporation delivers a high-performance solution for tube protection in extreme thermal and corrosive environments. Its low carbon composition ensures superior weldability and resistance to intergranular attack, making it a preferred choice for welded systems and continuous high-temperature applications. These shields reduce wear, enhance equipment life, and lower maintenance costs in power generation, refining, chemical, and marine industries. With customizable dimensions, high-grade material quality, and precision engineering, Ladhani Metal Corporation is your trusted partner for robust and reliable tube shielding solutions. For technical assistance, custom fabrication, or a quotation tailored to your application, please contact Ladhani Metal Corporation