DIN 2627 stainless steel flanges PN 400 are precision-engineered blind flanges manufactured according to the DIN 2627 standard. Designed to withstand ultra-high-pressure conditions up to 400 bar (5800 psi), these flanges are used to terminate or isolate piping systems safely and effectively. Fabricated from high-grade stainless steels, including 304, 316, and 321, these blind flanges provide superior mechanical strength, corrosion resistance, and long service life in aggressive industrial environments. Ladhani Metal Corporation is a globally recognized manufacturer and exporter of stainless steel flanges. Our DIN 2627 PN 400 blind flanges are widely trusted in sectors such as oil and gas, chemical processing, marine, energy, and high-pressure utility systems for their durability, quality, and performance under extreme conditions. Pressure Rating: • PN 400 (400 bar / 5800 psi): Suitable for high-pressure pipelines and critical systems where absolute sealing and structural integrity are required. Flange Type: • Blind Flanges Solid, non-bored flanges used to block pipeline ends or vessel nozzles. These flanges are essential for system isolation during maintenance, testing, or future expansions. • Flat Face (FF) Flanges Flat face flanges are designed to mate with flat gaskets and flat-faced components. They provide even gasket compression and are ideal when used with cast iron or brittle materials to avoid flange distortion. Stainless Steel Grades and Full Composition: Stainless Steel 304 • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 10.5% • Carbon (C): ≤ 0.08% (304), ≤ 0.03% (304L) • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Excellent general corrosion resistance. Commonly used in food processing, water systems, and chemical equipment. Stainless Steel 316 • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% • Carbon (C): ≤ 0.08% (316), ≤ 0.03% (316L) • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Enhanced resistance to chlorides and acidic environments. Ideal for marine, pharmaceutical, and chemical processing. Stainless Steel 321 • Chromium (Cr): 17.0 – 19.0% • Nickel (Ni): 9.0 – 12.0% • Titanium (Ti): ≥ 5 × C (typically 0.20 – 0.70%) • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: 321 stainless steel is stabilized with titanium, providing excellent resistance to intergranular corrosion after welding and high-temperature exposure. Commonly used in thermal processing, aerospace, and exhaust systems. Applications of DIN 2627 Stainless Steel Flanges PN 400: • Oil and Gas Industry Used in upstream and downstream systems, where high pressure and harsh chemicals are common. • Chemical and Petrochemical Plants Ideal for isolating high-pressure lines carrying corrosive or reactive chemicals. • Marine and Offshore Engineering Suitable for saltwater-exposed piping, ballast systems, and underwater applications requiring corrosion resistance. • Power Generation Applied in steam, nuclear, and thermal plants for sealing pressurized piping and vessel systems. • Aerospace and High-Temperature Systems 321-grade blind flanges are used in systems exposed to elevated temperatures and thermal cycling. • Water Treatment and Desalination Withstands chloride-induced corrosion in high-pressure brine and filtration lines. Key Features: • Manufactured to DIN 2627 specifications • PN 400 pressure rating for extreme pressure performance • Blind flange design ideal for system isolation and termination • Available in stainless steel grades 304, 304L, 316, 316L, and 321 • Flat face type for even gasket compression and sealing integrity • Superior corrosion resistance and mechanical strength • Suitable for aggressive chemical, marine, and high-temperature environments • Custom sizes, surface finishes, and pressure classes available upon request Conclusion: DIN 2627 Stainless Steel Flanges PN 400 by Ladhani Metal Corporation are designed for maximum performance in high-pressure, corrosive, and high-temperature environments. With material options including 304, 316, and titanium-stabilized 321 stainless steel, these blind flanges offer flexibility, reliability, and long-term service life across critical industries. Contact Ladhani Metal Corporation today for technical assistance, specifications, or custom flange solutions.

DIN 2527 blind flanges are sealing components used in piping systems to close the ends of pipes, valves, or pressure vessels where no further connection is required. These flanges are designed to prevent the flow of fluids or gases, isolate sections of the piping system for maintenance, or facilitate pressure testing of the system. The DIN 2527 standard ensures these flanges meet specific dimensional and mechanical properties for reliable performance in various industrial applications. material type : Titanium: Titanium flanges, including Grade 2 and Grade 5, are known for their exceptional resistance to corrosion, particularly in aggressive environments like seawater and chemicals. These lightweight and strong materials are commonly used in aerospace, marine, and chemical industries. Stainless Steel (SS): Stainless steel, including grades like 304 and 316, provides excellent corrosion resistance, particularly in harsh environments. It is used in industries like chemical processing and marine applications, where resistance to corrosion and oxidation is essential. Carbon Steel (C.S.): Carbon steel is a popular choice for DIN 2527 blind flanges due to its strength, weldability, and cost-effectiveness. It is ideal for general-purpose applications in systems with moderate temperature and pressure conditions, using grades like St 37 and A105. Mild Steel (MS): Mild steel is a low-carbon steel that offers good formability and strength, making it suitable for less demanding applications. It is commonly used in systems where high pressure or corrosion resistance is not a critical concern. Alloy Steel: Alloy steel flanges, such as A182 F11 and A182 F22, are designed for high-temperature and high-pressure applications. They offer greater strength, thermal expansion resistance, and durability, making them ideal for power generation and petrochemical industries. Inconel: Inconel flanges, including Inconel 600 and 625, are ideal for extreme high-temperature and aggressive environments. These alloys provide superior strength and exceptional resistance to oxidation and corrosion, making them suitable for high-performance applications. SS Duplex Steel: Duplex steel, such as grade 2205, combines the characteristics of both austenitic and ferritic steels, offering high strength and superior resistance to corrosion. It is ideal for use in chemical and marine environments where stress corrosion cracking resistance is crucial. SS Super Duplex Steel: Super duplex steel, such as 2507, provides a combination of high strength and excellent corrosion resistance, especially in harsh environments. It is highly resistant to pitting and stress corrosion cracking, making it ideal for demanding applications in the oil, gas, and marine industries. Key Features of DIN 2527 Blind Flanges: Material Variety: DIN 2527 blind flanges are available in different materials, including carbon steel, mild steel, stainless steel, alloy steel, and special alloys like Inconel or Duplex steel, offering a wide range of options to meet the needs of different environments, temperatures, and pressures. Pressure and Temperature Ratings: These flanges are available in different pressure ratings such as PN6, PN10, PN16, PN25, and PN40, ensuring they can withstand the required pressures for various industrial applications. Dimensional Standards: The DIN 2527 standard ensures precise dimensional accuracy, allowing for reliable sealing and easy installation in piping systems. These flanges are available in various nominal diameters, typically ranging from DN10 (1/2 inch) to DN600 (24 inches) or more, depending on the system requirements.

DIN 2527 Mild Steel Blind Flanges are specialized components designed to seal the ends of pipes or vessels in industrial piping systems where no further connection is required. These flanges, made from mild steel, are used in a wide range of applications due to the material's strength, cost-effectiveness, and ease of fabrication. The DIN 2527 standard ensures that these flanges meet the highest specifications for dimensional accuracy, pressure tolerance, and mechanical strength, making them ideal for general-purpose sealing in various industries. Material Composition of Mild Steel (MS) Flanges: Mild steel, or low-carbon steel, is commonly used for manufacturing DIN 2527 blind flanges. The composition of mild steel typically includes: Carbon (C): 0.05% to 0.25% – Provides strength while ensuring ductility and ease of welding. Manganese (Mn): 0.30% to 0.90% – Enhances strength and hardenability. Silicon (Si): 0.10% to 0.60% – Contributes to deoxidation and strength. Phosphorus (P): Up to 0.04% – Low phosphorus content ensures better toughness. Sulfur (S): Up to 0.05% – Low sulfur content to avoid brittleness. Iron (Fe): The remaining composition – Mild steel is primarily iron. This composition provides a cost-effective material with good weldability, formability, and mechanical properties for most non-corrosive applications. Key Features of DIN 2527 Mild Steel Blind Flanges: Temperature and Pressure Resistance: Operating Temperature: While mild steel doesn't handle extreme temperatures as well as superalloys like Inconel, it is suitable for moderate temperature environments where temperatures do not exceed around 300°C (572°F). Pressure Tolerance: DIN 2527 mild steel blind flanges are available in standard pressure ratings, such as PN6, PN10, PN16, and higher pressure classes depending on the application. These pressure ratings ensure the flanges are safe and durable under normal industrial pressures. Dimensional Accuracy and Pressure Class: The DIN 2527 standard ensures precise dimensional accuracy of mild steel blind flanges, making them easy to install in piping systems. These flanges are available in various sizes and thicknesses, with flanges designed to meet specific pressure classes such as PN6, PN10, PN16, PN25, and PN40, depending on the application. Design and Types of DIN 2527 Mild Steel Blind Flanges: Standard Blind Flange (Type A): A solid, circular flange ideal for general applications where no further connection is required. It provides a simple and reliable seal for pipeline isolation. Flat-Faced Blind Flange: Features a flat sealing surface, suitable for low-pressure systems or applications with minimal sealing requirements. It is typically used in systems where the flange is bolted directly to a flat mating surface. Raised Face Blind Flange: Has a raised surface to improve sealing performance under higher pressure applications. This type ensures a tighter seal and is ideal for medium-to-high-pressure systems. Ring-Type Joint (RTJ) Blind Flange: Designed for high-pressure systems, it has a groove that holds an RTJ gasket. This design ensures a high-pressure seal and is often used in critical applications where pressure integrity is essential. Long Weld Neck Blind Flange: Features an extended neck for welding to the pipe, offering additional strength and stability. It is used in high-pressure or stressed systems that require the flange to be securely welded to the pipeline. Nominal Diameter: Available in a wide range of nominal diameters (e.g., DN10, DN50, DN150, DN600, DN1000), to accommodate different pipe sizes and system requirements.

DIN 2527 Monel Blind Flanges are critical components used in piping systems to seal the open ends of pipes, vessels, or equipment when no further connection is needed. These blind flanges are made from Monel alloys, a group of nickel-copper-based alloys known for their exceptional corrosion resistance, especially in harsh marine and chemical environments. Monel flanges, manufactured to the DIN 2527 standard, ensure superior strength and reliability in demanding applications, making them ideal for industries such as chemical processing, marine, and power generation. Material Composition of Monel Alloys: Monel alloys are primarily composed of Nickel (Ni) and Copper (Cu), along with small amounts of other elements such as iron, manganese, and silicon. Two of the most commonly used Monel alloys in blind flange production are: Monel 400: Nickel (Ni): 63% Copper (Cu): 28-34% Iron (Fe): 2.5% max Manganese (Mn): 2.0% max Silicon (Si): 0.5% max Carbon (C): ≤ 0.30% Sulfur (S): ≤ 0.024% Monel K-500: Nickel (Ni): 63% Copper (Cu): 28% Aluminum (Al): 2.3-3.1% Titanium (Ti): 0.35-0.85% Iron (Fe): 2.5% max Manganese (Mn): 1.0% max Silicon (Si): 0.5% max Carbon (C): ≤ 0.30% Sulfur (S): ≤ 0.015% Key Features of DIN 2527 Monel Blind Flanges: Corrosion Resistance: Monel alloys are highly resistant to a wide variety of corrosive agents, including seawater, sulfuric acid, hydrochloric acid, and alkaline environments. Monel 400, in particular, is known for its excellent resistance to chloride-induced stress corrosion cracking, making it ideal for marine applications. Monel K-500 offers enhanced strength and resistance to corrosion fatigue, commonly used in more challenging environments. Temperature Resistance: Monel 400 can withstand temperatures up to 1000°F (538°C) continuously and up to 1200°F (649°C) intermittently. Monel K-500 offers high strength and resistance to oxidation and scaling in environments up to 1000°F (538°C). Mechanical Strength: Monel 400 is known for its strength and durability, especially in environments that require resistance to both high pressure and corrosion. Monel K-500 exhibits additional strength due to the presence of aluminum and titanium, making it suitable for applications under higher stresses. Dimensional Accuracy and Pressure Class: DIN 2527 Monel Blind Flanges are manufactured to precise dimensions, ensuring a secure seal in the piping system. These flanges are available in various pressure classes, such as PN6, PN10, PN16, and others, providing flexibility for different pressure ratings. Design Options: Standard Blind Flange (Type A): A solid, flat disc used to seal the end of a pipe or vessel. Flat-Faced Blind Flange: Designed with a flat sealing surface, ideal for low-pressure systems. Raised Face Blind Flange: Features a raised surface around the center to improve sealing in high-pressure systems. Ring-Type Joint (RTJ) Blind Flange: Includes a groove for an RTJ gasket, used for high-pressure applications, often in the oil and gas industry. Long Weld Neck Blind Flange: Features an extended neck for welding, offering additional strength and used in high-pressure or stressed systems. Nominal Diameter: DIN 2527 Monel Blind Flanges are available in a wide range of sizes, typically from DN10 (1/2 inch) up to DN600 (24 inches) or more, depending on system requirements.

DIN 2527 SS 321 Blind Flanges are specialized components used in industrial piping systems to close off the ends of pipes or equipment where no further connection is necessary. A blind flange is a solid, flat disc without a central bore, specifically designed to seal the open end of a pipe or a vessel. The DIN 2527 standard, developed by the German Institute for Standardization, defines the specifications for these flanges, ensuring that they meet high standards for dimensional accuracy, pressure tolerance, and mechanical strength. The SS 321 material, used for the production of these blind flanges, is an austenitic stainless steel known for its excellent resistance to high-temperature oxidation, corrosion, and scaling. The addition of titanium to this steel stabilizes its structure, making it suitable for environments where temperatures fluctuate or are consistently high. As a result, SS 321 blind flanges are frequently used in industries where both strength and resistance to harsh environmental conditions are paramount, including the chemical, petrochemical, aerospace, and power generation industries. By utilizing DIN 2527 SS 321 Blind Flanges, companies can ensure secure, long-lasting, and efficient closures for piping systems under challenging operational conditions. These flanges are essential in maintaining the integrity of systems exposed to elevated pressures and corrosive substances, ensuring the safe containment of fluids and gases. key Features of DIN 2527 SS 321 Blind Flanges: Material Composition of SS 321: Carbon (C): ≤ 0.08% Chromium (Cr): 17.0 - 19.0% Nickel (Ni): 9.0 - 12.0% Titanium (Ti): 5 times the carbon content, generally around 0.60% minimum, to prevent carbide precipitation. Manganese (Mn): 2.00% max Silicon (Si): 1.00% max Phosphorus (P): 0.045% max Sulfur (S): 0.030% max Pressure and Temperature Resistance: Operating Temperature: SS 321 can perform well in high-temperature environments, up to 900°C (1650°F) intermittently and up to around 700°C (1292°F) for continuous service. Design and Dimensions of DIN 2527 Blind Flanges: Pressure Ratings: The design of a DIN 2527 blind flange is primarily based on pressure class ratings (such as PN6, PN10, PN16, etc.), which denote the maximum pressure the flange can safely withstand. Bolt Holes: The number and size of bolt holes for DIN 2527 blind flanges are specified according to the flange's pressure class and size. The bolt pattern is designed to ensure a tight seal and accommodate appropriate bolt sizes for a given pressure class. Thickness: The thickness of a blind flange can vary depending on the pressure rating and size, with thicker flanges being required for higher pressure applications. Nominal Diameter: Blind flanges are available in various nominal pipe diameters (DN) ranging from DN10 (1/2 inch) up to DN600 (24 inches) or more. Types of DIN 2527 SS 321 Blind Flanges: Standard Blind Flange (Type A): A solid, circular flange used to seal the end of a pipe or vessel. Common for general applications. Flat-Faced Blind Flange: Has a flat sealing surface, ideal for low-pressure systems and tight sealing. Raised Face Blind Flange: Features a raised surface around the center for better sealing in higher pressure systems. Ring-Type Joint (RTJ) Blind Flange: Has a groove for an RTJ gasket, designed for high-pressure applications, often used in the oil and gas industry. Long Weld Neck Blind Flange: Has an extended neck for welding, providing additional strength and used in high-pressure or stressed systems.

A DIN 2527 AISI 4140 blind flange is a specialized type of blind flange made from AISI 4140 alloy steel, adhering to the DIN 2527 German standard. Blind flanges are crucial components in piping systems, used to seal the end of a pipe, vessel, or valve to isolate it or stop the flow of fluids. The AISI 4140 material used for this specific flange is a high-strength alloy steel known for its robustness and excellent mechanical properties, making it ideal for high-stress applications. AISI 4140, a chromium-molybdenum alloy steel, is renowned for its excellent mechanical properties, including high tensile strength, hardness, and resistance to wear. It is often used in heavy-duty applications such as in the automotive, aerospace, and oil & gas industries, where the need for robust materials is crucial. The use of AISI 4140 steel in a DIN 2527 blind flange ensures that the flange can handle high pressures, temperatures, and mechanical stresses without compromising on performance or safety. Material: AISI 4140 Alloy Steel Composition: AISI 4140 is a medium-carbon steel alloy that contains chromium (Cr) and molybdenum (Mo) as its primary alloying elements. These elements improve the steel's hardness, strength, and wear resistance. Key Properties: Strength: High tensile strength and yield strength, making it capable of withstanding high loads and stress in high-pressure applications. Toughness: Offers excellent toughness and impact resistance, making it suitable for challenging environments where forces are dynamic. Hardness: Can be heat-treated to achieve high hardness levels, providing resistance to wear and abrasion. Corrosion Resistance: While AISI 4140 is not as corrosion-resistant as stainless steel, it can still perform well in less corrosive environments with proper surface treatment (e.g., coatings or galvanizing). Design and Dimensions (DIN 2527) Shape: The blind flange is a flat, circular plate with no central hole. Its purpose is to seal the end of a pipe or vessel, effectively "closing" the pipeline or system. Bolt Holes: The flange has evenly spaced bolt holes around the perimeter, allowing it to be bolted securely to the corresponding flange or fitting in the system. These holes align with the bolt pattern of other components. Thickness: The flange thickness varies depending on the size, pressure class, and specific application requirements. It is designed to withstand internal pressure while providing a reliable seal. Pressure Rating: Flanges are typically rated according to pressure classes such as PN 6, PN 10, PN 16, PN 25, etc., indicating the maximum pressure the flange can safely handle without failure. Applications Pipeline Sealing: The primary function of a blind flange is to seal the open end of a pipeline, preventing the passage of fluids, gases, or other materials through the system. System Isolation: Blind flanges are used to isolate a section of the system for maintenance or repairs, allowing for safe disconnection of parts while maintaining system integrity. Pressure Containment: AISI 4140 blind flanges are also used in applications where maintaining pressure within a system is critical. The high strength and durability of AISI 4140 make it suitable for use in high-pressure environments. Types of Blind Flanges in DIN 2527 Raised Face (RF): The flange surface has a small raised area around the bolt circle to improve sealing when mated with a gasket. Flat Face (FF): The flange surface is level with the flange body, typically used with softer gaskets to create a seal. Ring Type Joint (RTJ): The flange may feature a groove to accommodate a metal ring gasket for high-pressure applications, providing a secure, reliable seal.

DIN 2527 is a German standard that defines the dimensions, design, and tolerances for flanges, including blind flanges. Blind flanges made of stainless steel 316 are commonly used in piping systems to seal the ends of pipes, providing a secure and reliable closure. Here's a detailed description of DIN 2527 Stainless Steel 316 Blind Flanges: Material: Stainless Steel 316: This is a higher grade of stainless steel compared to 304, offering superior corrosion resistance. Stainless steel 316 contains molybdenum, which enhances its resistance to corrosion, particularly against chlorides, making it ideal for environments with higher risks of corrosion, such as seawater, chemicals, and marine environments. Corrosion Resistance: Stainless steel 316 has excellent resistance to a wide range of chemicals and industrial environments. Temperature Resistance: It can withstand higher temperatures compared to 304 stainless steel, making it suitable for high-temperature applications. Strength: Stainless steel 316 has slightly higher tensile strength compared to 304, offering added durability and structural integrity. Design and Dimensions: Shape: Blind flanges are flat, round plates with no center hole, used to seal the end of a pipe or pressure vessel. Bolt Holes: These flanges have bolt holes to align with bolts for connecting to other flanged components. The number and size of bolt holes depend on the diameter of the flange and the pressure class. Thickness: The thickness of DIN 2527 blind flanges varies depending on the pressure class (PN 6, PN 10, PN 16, PN 25, etc.). Thicker flanges can handle higher pressure ratings and provide a more secure seal. Pressure Rating: Similar to other flanges, the pressure rating for DIN 2527 blind flanges is important for determining the maximum pressure they can withstand without failure. Stainless steel 316 flanges can be designed to withstand high-pressure applications. Applications: Sealing: Blind flanges made of stainless steel 316 are used to seal the end of a pipeline or vessel to prevent fluid leakage, effectively creating a closed system. System Isolation: These flanges are used to isolate sections of a piping system for maintenance or modification, allowing for safe shutoff of pressure or fluid flow. High-Corrosion Environments: Due to the superior corrosion resistance of stainless steel 316, these blind flanges are used in industries where exposure to corrosive materials, saltwater, or harsh chemicals is a concern (e.g., chemical processing, marine, pharmaceutical, food processing). Types of Blind Flanges in DIN 2527: Raised Face (RF): The face of the flange is slightly raised to improve the sealing capability when paired with a gasket. Flat Face (FF): The face of the flange is level with the surface, often used with softer gaskets for a secure seal. Ring Type Joint (RTJ): For applications requiring high pressure, a ring-type joint may be used, which features a groove in the flange for a metallic gasket.

Ladhani Metal Corporation offers SS 310 Half Round Tube Shields specifically designed to protect reheater (R/H) tubes in boilers, power plants, and industrial steam systems. Reheater tubes carry steam through the reheater section of the boiler, where the steam is reheated after partial expansion in the high-pressure turbine to improve efficiency and prevent moisture formation. Manufactured from high-temperature austenitic stainless steel grade SS 310, these shields offer outstanding resistance to oxidation, carburization, and scaling at elevated temperatures, making them suitable for extreme boiler environments. Function of R/H Tubes • Carry steam through the reheater section of the boiler • Exposed to very high temperatures (often > 540°C) and erosion from flue gases • Often protected with Half Round Tube Shields in areas where flue gas velocity and ash particles cause wear Ladhani Metal Corporation manufactures, supplies, and exports SS 310 Half Round Tube Shields in various lengths, diameters, and thicknesses, serving both domestic and international markets. SS 310 Grade Chemical Composition – Austenitic Stainless Steel • Carbon (C): ≤ 0.25% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.50% • Chromium (Cr): 24.00 – 26.00% • Nickel (Ni): 19.00 – 22.00% • Iron (Fe): Balance Applications: Suitable for reheater sections in thermal power plants, waste heat recovery boilers (WHRBs), and heat recovery steam generators (HRSGs) exposed to severe oxidation, scaling, and erosive flue gas conditions. Uses • Protects reheater tubes from erosion, oxidation, and soot blower impact • Shields R/H tubes in high-temperature, high-velocity flue gas zones • Extends operational life of boiler steam circuits in aggressive environments • Applicable in utility boilers, WHRBs, HRSGs, and petrochemical heaters Features • Excellent oxidation resistance – Withstands continuous service up to 1100°C • Superior scaling resistance – Performs well in cyclic temperature conditions • High chromium and nickel content – Enhances corrosion and heat resistance • Precision fit – Matches tube curvature for maximum shielding efficiency Applications • Power generation boilers – Long-term protection for reheater tubes under extreme thermal loads • Waste heat recovery systems – Safeguards tubes in erosive and high-temperature flue gas streams • Industrial steam plants – Maintains performance in fluctuating thermal cycles • Petrochemical furnaces – Suitable for aggressive reheating environments Conclusion The SS 310 Half Round Tube Shield for Reheater (R/H) Tubes by Ladhani Metal Corporation provides exceptional high-temperature and oxidation-resistant protection for critical steam circuit components. Designed for precision fit, durability, and long service life, these shields reduce wear, minimize downtime, and are available in a wide range of export-ready specifications. For technical details and supply inquiries, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #HalfRoundReheaterShield #ReheaterTubeShield #BoilerReheaterProtection #PowerPlantTubeShield

Ladhani Metal Corporation offers SS 430 Boiler Half Round Tube Shields designed to protect straight boiler and heat exchanger tubes from erosion, oxidation, and high-temperature wear. Manufactured from ferritic stainless steel grade SS 430, these shields provide good corrosion resistance, excellent formability, and reliable thermal stability in moderately aggressive service environments. The shields are precision-formed into a half-round profile to match the curvature of standard boiler tubes, ensuring a secure fit and effective coverage. This design provides a physical barrier against soot blower impact, abrasive flue gas, and particulate erosion, extending the operational life of tubes and reducing maintenance costs. Ladhani Metal Corporation manufactures, supplies, and exports SS 430 Boiler Half Round Tube Shields in a wide range of lengths, diameters, and thicknesses, catering to both domestic and international markets. SS 430 Grade Chemical Composition – Ferritic Stainless Steel • Carbon (C): ≤ 0.12% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): ≤ 0.75% • Iron (Fe): Balance Applications: Ideal for power plants, WHRBs, HRSGs, and industrial boiler systems requiring protection in dry heat and oxidizing environments. Uses • Shields straight tubes in utility boilers and superheaters • Protects against flue gas erosion and surface scaling • Applied in WHRBs and HRSGs operating with clean or mildly corrosive gases • Suitable for industrial furnaces and heat recovery systems Features • Cost-effective protection – Combines durability with economic material choice • Oxidation resistance – Performs well in clean flue gas and dry heat conditions • Thermal reliability – Withstands repeated heating cycles without deformation • Precision fit – Formed to match tube diameter for secure installation • Flexible mounting – Can be clamped, banded, or tack welded • Export quality – Manufactured to meet international standards Applications • Thermal power stations – Guards steam and boiler tubes from scaling • Waste heat recovery boilers – Shields tubes in clean gas environments • Process heaters – Effective in less corrosive gas heating systems • Food and cement industries – Protects tubes from oxidation and moderate wear Conclusion The SS 430 Boiler Half Round Tube Shield from Ladhani Metal Corporation delivers cost-efficient and reliable protection for boiler tubes in dry heat and oxidizing service conditions. With good formability, corrosion resistance, and thermal performance, these shields are a practical solution for extending tube life and reducing operational downtime. Available in custom dimensions and export-ready specifications, they serve a wide range of industrial boiler applications worldwide. For detailed sizing, technical support, or export inquiries, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield