Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are protective components engineered to shield boiler tubes, superheaters, and heat exchangers from erosion, scaling, and ash impact. These shields are widely used in thermal power plants, industrial steam systems, and waste heat recovery units to prolong tube life and enhance operational reliability. Their semi-cylindrical shape allows for easy installation over exposed tube surfaces, especially in zones exposed to abrasive flue gases and thermal stress. SS 310S Half Round Tube Shield for LTSH Tube The SS 310S Half Round Tube Shield is manufactured from low-carbon austenitic stainless steel grade 310S. With high chromium and nickel content, it offers excellent resistance to oxidation and scaling at elevated temperatures, while its reduced carbon level enhances weldability and reduces the risk of sensitization. This makes it ideal for Low Temperature Superheater (LTSH) applications, where tubes are exposed to flue gas streams, ash particles, and moderate thermal cycling. The Low Temperature Superheater (LTSH) is a section in a boiler where saturated steam from the steam drum is superheated to a moderately higher temperature before entering the high-temperature superheater stages. Positioned in areas with relatively lower flue gas temperatures, the LTSH helps improve thermal efficiency and reduces moisture content in steam. Due to constant exposure to abrasive flue gases and ash, LTSH tubes are prone to wear and require protective shielding, such as half round tube shields, to extend service life. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of SS 310S Half Round Tube Shields for LTSH tubes, offering high-performance shielding solutions for long-term service in boiler and heat recovery systems. Chemical Composition of SS 310S – Low Carbon Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.50% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Applications: Suitable for areas with exposure to moderate temperatures, oxidizing gases, and ash deposition where high-temperature strength and corrosion resistance are critical. Uses • Protects LTSH tubes in power boilers from ash erosion, soot impact, and flue gas corrosion • Used in convection zones of HRSGs, economizers, and waste heat recovery units • Shields tube surfaces in steam generation systems exposed to gas turbulence and thermal cycling • Effective in industrial heating systems and chemical boilers facing scale formation and heat stress • Enhances durability of tubes in coal-fired and biomass-fired boilers with fly ash carryover Features • Excellent oxidation and scaling resistance – Performs in oxidizing environments and thermal zones • Superior weldability – Low carbon content minimizes risk of intergranular corrosion during welding • Tailored protection – Custom-fabricated to match tube diameter, bend radius, and system layout • Simple installation – Compatible with clamping, banding, or welding methods for quick setup • Extended tube life – Minimizes erosion and surface degradation, reducing maintenance downtime • Available in various lengths and thicknesses per system requirements Applications • thermal power plants – Installed on LTSH tube banks for long-term protection against erosion and corrosion • waste heat recovery boilers – Shields curved tubes in return flow zones with ash-laden flue gas • petrochemical units – Applied on steam coils and heat exchanger tubes operating under oxidizing gas exposure • utility boilers – Protects superheater tubes from scaling and particulate impact in low-temperature sections • industrial boiler systems – Enhances performance and service life of steam tubes in energy recovery zones Conclusion The SS 310S Half Round Tube Shield for LTSH Tube by Ladhani Metal Corporation – manufacturer, supplier, and exporter – offers reliable protection for superheater tubes operating in low-temperature, oxidizing, and abrasive flue gas environments. With enhanced weldability, high-temperature resistance, and custom-fit fabrication, this shield ensures dependable performance across a wide range of thermal and industrial applications. For technical assistance, tailored designs, or quotation requests, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-formed protective sleeves designed to guard heat exchanger and boiler tubes from high-temperature corrosion, erosion, and mechanical wear. These shields are used extensively across thermal power, petrochemical, and process industries to improve tube longevity and reduce maintenance costs. Their half-round design allows easy installation without dismantling the tube system. SS 304L U Type Half Round Tube Shield The SS 304L U Type Half Round Tube Shield is designed to protect both straight and curved (U-bend) tube sections in heat exchangers, superheaters, and boilers. Made from low-carbon stainless steel 304L, this shield provides excellent corrosion resistance and is particularly suitable for applications where post-weld heat treatment is not feasible. Its U-shaped profile ensures secure coverage of return bends, which are often the most vulnerable to thermal stress and flue gas attack. This shield is available in both inner and outer configurations to ensure full tube coverage. This shield is available in two key configurations to provide complete protection around the bend radius: • Outer U Type Half Round Tube Shield – Covers the external curvature of U-bend tubes exposed to radiant heat, slag, and gas flow. • Inner U Type Half Round Tube Shield – Protects the internal arc of bends from turbulence, scaling, and localized heat buildup. Ladhani Metal Corporation is a trusted manufacturer and exporter of SS 304L U Type Half Round Tube Shields, delivering durable and customized protection solutions for global industrial applications. Chemical Composition of SS 304L – Austenitic Stainless Steel • Carbon (C): ≤ 0.035% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 12.0% • Iron (Fe): Balance Applications: Ideal for high-temperature and corrosive environments where low carbon content is preferred to minimize carbide precipitation during welding. Uses • U-bend tube shielding in superheaters and heat exchangers • Return bend protection in boilers and WHRBs • Shielding of curved coils in steam reforming and process plants • Corrosion prevention in waste-to-energy and flue gas-exposed systems • Surface protection in ammonia plants, HRSGs, and incinerators Features • corrosion resistant – SS 304L offers excellent resistance to oxidation, scaling, and chemical attack in high-temperature environments • low carbon content – minimizes risk of carbide precipitation during welding, improving post-weld corrosion resistance • precise fit – custom-formed to match U-bend radius for secure installation and effective shielding • high durability – retains mechanical strength under thermal cycling and flue gas exposure • easy installation – designed for quick on-site mounting via clamping, welding, or banding • versatile finish – available in pickled, passivated, or bright annealed surface treatments • customizable – produced in various lengths, thicknesses, and diameters as per customer requirements Applications • Thermal power plants – Protects U-bend tubes in superheaters, reheaters, and economizers. Prevents oxidation, scaling, and thermal damage from flue gases. • Petrochemical refineries – Shields curved furnace and exchanger tubes. Resists heat, carburizing gases, and corrosive media. • Waste heat recovery systems (WHRBs) – Guards return bends from ash erosion and gas turbulence. Enhances tube life in incinerators, engines, and kilns. • Chemical and fertilizer plants – Used on U-bends in reactors and reformers. Prevents stress corrosion and thermal fatigue. • HRSGs and boilers – Installed on return coils exposed to high-temperature flue gases. Ensures reliable operation under cyclic heating conditions. Conclusion The SS 304L U Type Half Round Tube Shield by Ladhani Metal Corporation provides comprehensive and long-lasting protection for U-bend tube sections operating in aggressive thermal and corrosive environments. Manufactured with high-precision forming and superior materials, these shields offer reliable coverage, excellent weldability, and extended service life. As a leading manufacturer and exporter, Ladhani Metal Corporation offers customized shielding solutions that match your project’s specifications and environmental demands. For detailed specifications, technical support, or to request a quotation, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are specially designed components used to protect boiler and heat exchanger tubes from erosion, wear, and high-temperature damage. Manufactured with precision and expertise, these shields enhance tube life, reduce maintenance requirements, and support efficient operation in high-performance industrial systems. The half-round design enables quick installation and provides effective coverage for vulnerable tube surfaces. SS 304 U Type Half Round Tube Shield The SS 304 U Type Half Round Tube Shield is a specially fabricated, semi-circular tube protection device designed to fit around both the curved (U-bend) and straight sections of heat exchanger and boiler tubes. Constructed from premium-grade stainless steel 304, it offers exceptional resistance to corrosion, oxidation, and mechanical wear. Its U-shaped configuration ensures continuous protection along the bend radius, where erosion, thermal stress, and ash impingement are most intense. This shield is available in both inner and outer configurations to ensure full tube coverage. • Outer U Type Half Round Tube Shield – Shields the external curve of U-bend tubes from flame impingement, heat radiation, and gas flow abrasion. • Inner U Type Half Round Tube Shield – Protects the internal arc of the U-bend from turbulence, corrosion, and localized thermal impact. Ladhani Metal Corporation is a leading manufacturer and exporter of SS 304 U Type Half Round Tube Shields, offering high-quality and custom-engineered solutions to meet the demanding requirements of global industries. Chemical Composition of SS 304 – Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 10.5% • Iron (Fe): Balance Applications: Ideal for use in thermal power systems, steam generation units, and petrochemical processing where tube bends are subject to extreme heat, corrosion, or flow-related erosion. Uses • Protection of U-bend sections in superheaters, reheaters, and economizers • Shielding of return bends in heat exchangers exposed to flue gas or high-velocity media • Enhancement of tube durability in HRSG systems and boilers • Erosion prevention in waste heat recovery boilers and furnace zones • Corrosion mitigation in chemical process plant U-tube bundles Features • Material: Manufactured from high-grade SS 304 for superior heat and corrosion resistance • Configuration: Inner and outer U-type shields available for full bend coverage • Design: Formed precisely to match U-bend tube radius for secure, vibration-free fitment • Finish: Bright annealed, pickled, or passivated finishes available (custom finishes on request) • Durability: High mechanical strength and long service life under thermal cycling • Customization: Available in various lengths, thicknesses, and diameters as per project requirements • Easy Installation: Designed for clamping, welding, or banding with minimal tube interference Applications • Thermal power stations and utility boilers • Waste-to-energy systems and HRSGs • Petrochemical refineries and furnace systems • Chemical processing and ammonia plants • Steam-based heat recovery units • Pulp and paper mills with superheater tube networks Conclusion The SS 304 U Type Half Round Tube Shield by Ladhani Metal Corporation offers a reliable and efficient solution for protecting U-bend tube sections in demanding high-temperature and corrosive environments. As a trusted manufacturer and exporter, Ladhani Metal Corporation delivers products that combine durability, precision, and performance. Designed for longevity and ease of installation, these shields help extend tube life and reduce unplanned maintenance. Custom-built to your specifications, our tube shields are a dependable solution for critical tube protection. For technical specifications, customized sizes, or quotation requests, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered components used to protect tubes in boilers, heat exchangers, and high-temperature process systems. Designed to reduce tube erosion, oxidation, and thermal fatigue, these shields play a critical role in maintaining the longevity and reliability of industrial equipment in thermally aggressive and corrosive environments. Cr23Ni13 Half Round Tube Shield The Cr23Ni13 Half Round Tube Shield is a semi-cylindrical protective sleeve manufactured from high-alloy stainless steel containing approximately 23% chromium and 13% nickel. This alloy provides excellent resistance to high-temperature oxidation, scaling, and corrosion, particularly in systems operating up to 1000°C. With an austenitic microstructure, Cr23Ni13 exhibits good strength, ductility, and resistance to thermal shock, making it ideal for use in heat-intensive industrial processes. The half-round shape allows for easy installation over existing tubes, creating a strong and secure shield against gas flow, flame impingement, and particulate erosion. Chemical Composition of Cr23Ni13 – Austenitic Heat-Resistant Stainless Steel • Carbon (C): ≤ 0.12% • Silicon (Si): ≤ 1.50% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Chromium (Cr): 22.0 – 24.0% • Nickel (Ni): 12.0 – 14.0% • Iron (Fe): Balance Uses • Superheater and Reheater Tube Protection – Prevents scaling and oxidation on boiler tubes exposed to high flue gas temperatures in thermal power stations. • Furnace Tube Shielding – Shields radiant and convection tubes from flame impingement, heat distortion, and thermal fatigue in process furnaces. • Heat Exchanger Tubes – Offers external protection against erosion and scaling in petrochemical and refining systems operating with hot gases. • Power and Steam Generation Systems – Used to protect steam tubing from oxidation and surface wear in continuous service at elevated temperatures. • Industrial Kilns and Incinerators – Guards exposed piping in rotary kilns and combustion chambers against corrosive deposits and heat damage. Features • High-Temperature Resistance – Performs reliably in continuous service up to 1000°C, maintaining strength and dimensional stability. • Oxidation and Scaling Protection – Chromium-rich composition creates a protective oxide layer that resists corrosion in oxidizing environments. • Austenitic Microstructure – Provides good mechanical strength, thermal expansion resistance, and excellent ductility under heat cycling. • Precision Half-Round Form – Designed for fast, secure installation over round tubes using welding or clamping techniques. • Durable Construction – Withstands vibration, thermal shock, and erosive gas flow common in industrial boilers and furnaces. • Custom Manufacturing – Offered in various diameters, wall thicknesses, and lengths to match specific application demands. • Optional Finishes – Available in pickled, passivated, or bright annealed surface finishes based on environmental and operational needs. Applications • Thermal and Utility Boilers – Shields superheater and economizer tubes from high-temperature corrosion and ash erosion. • Petrochemical Plants – Used in process heaters and reactors where external tube surfaces are exposed to oxidizing or carburizing atmospheres. • Refineries – Protects tubes in fired heaters and reformers against oxidation and mechanical degradation. • Waste-to-Energy Facilities – Guards boiler tubes from hot flue gas erosion and acidic gas corrosion in incineration systems. • Metallurgical Furnaces – Applied in steel and non-ferrous heat treatment plants to prevent oxidation and scale accumulation. • Cement and Lime Plants – Protects gas ducting and tube banks in preheaters, coolers, and flue recovery systems from abrasive dust and heat exposure. Conclusion The Cr23Ni13 Half Round Tube Shield by Ladhani Metal Corporation offers a reliable and efficient solution for tube protection in high-temperature and oxidizing environments. Its austenitic stainless steel composition ensures superior oxidation resistance, structural integrity, and longevity under continuous thermal stress. Whether used in boilers, furnaces, or reformers, these shields effectively reduce downtime, maintenance costs, and the risk of unexpected tube failures. With flexible customization, quality-controlled fabrication, and proven material performance, Ladhani Metal Corporation remains a trusted supplier of advanced shielding solutions for critical industrial applications. For detailed specifications, customization requests, or to obtain a quote, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are high-performance components designed to protect heat exchanger and boiler tubes from thermal damage, erosion, and high-temperature corrosion. These shields play a vital role in extending tube life and ensuring stable operation in demanding industrial environments such as petrochemical plants, power generation facilities, and high-temperature furnaces. 1Cr25Ni20Si2 Half Round Tube Shield The 1Cr25Ni20Si2 Half Round Tube Shield is a semi-cylindrical tube protector made from a heat-resistant alloy consisting of 25% chromium, 20% nickel, and 2% silicon. This alloy is known for its outstanding resistance to oxidation, carburization, and scaling at elevated temperatures, often exceeding 1100°C. The presence of silicon further enhances its oxidation resistance by forming a stable protective film on the surface. These shields are precision-formed in a half-round profile for easy clamping or welding over the tube surface, delivering a tight and durable fit. Chemical Composition of 1Cr25Ni20Si2 – Heat-Resistant ss Austenitic Alloy • Carbon (C): ≤ 0.20% • Silicon (Si): 1.50 – 2.50% • Manganese (Mn): ≤ 1.50% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Uses • Superheater and Reheater Tube Protection – Shields tubes from oxidation and metal dusting under high steam and flue gas temperatures in utility boilers. • Furnace Tube Protection – Prevents damage from flame impingement, scaling, and spalling in radiant and convection furnace zones. • Reforming and Cracking Units – Used in petrochemical plants to protect process tubes from carburization and oxidation during prolonged high-temperature service. • Air Preheaters and Heat Recovery Systems – Guards tubes from thermal fatigue and corrosive ash erosion in waste heat systems. • Gas-Fired and Biomass Boilers – Applied to protect critical tube sections exposed to high-velocity combustion gases and corrosive deposits. Features • Superior Oxidation Resistance – The combination of chromium, nickel, and silicon provides long-term stability in oxidizing environments above 1000°C. • Excellent Carburization and Sulfidation Resistance – Performs well in carbon-rich and sulfur-laden atmospheres, making it ideal for petrochemical service. • High Mechanical Strength – Retains structural integrity under thermal cycling and mechanical load at elevated service temperatures. • Precision Half-Round Design – Ensures easy fitment over existing tubes with minimal disruption to equipment layout or flow design. • Enhanced Surface Protection – Silicon contributes to the formation of a dense oxide scale, minimizing material loss due to scaling. • Custom Dimensions – Available in a range of thicknesses, diameters, and lengths with optional surface treatments like bright annealing and passivation. Applications • Thermal Power Plants – Used in critical boiler zones such as superheaters and economizers where high-temperature oxidation resistance is required. • Petrochemical and Refining Industries – Deployed in reformers, ethylene crackers, and process gas heaters where tubes face carburizing and oxidizing atmospheres. • Metallurgical Furnaces – Protects tubes and gas paths in steel, non-ferrous, and heat treatment furnaces operating under extreme thermal conditions. • Waste-to-Energy Systems – Shields boiler tubes and superheaters from corrosive ash and high flue gas temperatures in incinerators and biomass units. • Cement and Glass Plants – Guards heat recovery and exhaust handling tubes from scaling and thermal wear in rotary kilns and regenerative chambers. Conclusion The 1Cr25Ni20Si2 Half Round Tube Shield by Ladhani Metal Corporation is engineered for high-performance protection in environments where conventional stainless steels may fail. Its exceptional resistance to oxidation, carburization, and high-temperature scaling makes it a preferred solution for boiler, furnace, and heat exchanger tube protection across several heavy industries. With customizable sizes, expert fabrication, and material certifications, Ladhani Metal Corporation delivers reliable and long-lasting shielding components designed to enhance system integrity, reduce maintenance costs, and ensure uninterrupted operation under extreme thermal stress. For specification or to request a quotation, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered components designed to protect the outer surfaces of boiler tubes, heat exchangers, and industrial piping systems from erosion, scale formation, and thermal fatigue. These shields play a crucial role in minimizing tube failure and improving overall equipment reliability in high-temperature and particulate-laden environments. SS 430 Half Round Tube Shield The SS 430 Half Round Tube Shield is a semi-cylindrical cladding made from ferritic stainless steel grade 430. With good corrosion resistance, excellent oxidation resistance, and superior thermal conductivity, SS 430 is well suited for non-pressurized or moderately corrosive environments. It is particularly effective in flue gas paths and air preheaters where thermal stress and ash erosion can degrade exposed tubes. The half-round geometry ensures easy, secure installation and a consistent protective barrier around the tube's surface, enhancing durability without interfering with system function. Chemical Composition of SS 430 – Ferritic Stainless Steel • Carbon (C): ≤ 0.12% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): ≤ 0.75% • Iron (Fe): Balance Uses • Boiler Tube Surface Protection – Shields tubes in low to moderate temperature zones from flue gas corrosion, ash abrasion, and thermal scaling. • Air Preheater Tubing – Guards against dust erosion in regenerative air preheaters and gas-to-air heat transfer zones. • Economizer Tube Protection – Used in downstream sections of boilers where lower temperatures allow for effective use of ferritic steels. • Steam Line Shields – Protects low-pressure steam tubing and condensate lines in systems not requiring austenitic stainless steel grades. • Heat Exchanger Outer Shells – Provides an extra layer of protection in air-cooled or shell-side applications exposed to mechanical wear. Features • Good Oxidation Resistance – Performs reliably in oxidizing conditions up to 815°C, ideal for flue gas exposure and dry ash environments. • Ferritic Structure – Offers better thermal conductivity and resistance to thermal expansion than austenitic grades, reducing distortion risk. • Corrosion Resistance – Resists corrosion from atmospheric moisture, flue gas condensates, and other mildly aggressive compounds. • Cost-Effective – Offers an economical alternative to higher alloy stainless steels in appropriate thermal zones. • Precision Fit – Half-round design enables quick installation and conforms closely to tube diameters for optimal protection. • Surface Finish Options – Supplied in bright annealed, pickled, or passivated finishes based on operational requirements. • Custom Fabrication – Available in a range of wall thicknesses, diameters, and lengths to meet plant-specific installation demands. Applications • Thermal Power Stations – Shields economizer and air preheater tubes from dust-laden exhaust gas erosion and moderate thermal stress. • Cement and Lime Kilns – Used to protect heat recovery and cooler tubes from dry ash abrasion in hot air ducts. • Food Processing Boilers – Applied in steam systems requiring corrosion resistance and thermal control under hygienic conditions. • HVAC and Utility Boilers – Installed in auxiliary boilers where conditions do not require high-alloy materials but demand durability. • Pulp and Paper Mills – Protects lower furnace zone tubes and stack-side economizers from condensate corrosion and soot accumulation. • Sugar and Distillery Plants – Guards process steam and heat recovery tubes from ash and scale in biomass and bagasse-fired units. Conclusion The SS 430 Half Round Tube Shield by Ladhani Metal Corporation is a durable, cost-efficient solution for protecting tubing systems in environments where moderate corrosion resistance, good oxidation behavior, and thermal stability are essential. It is best suited for dry, low to mid-temperature gas flow areas where the mechanical and thermal loads are not extreme. The ferritic stainless steel structure provides a favorable balance of performance and economy, particularly in large-scale power and process plants. With precision manufacturing, tailored dimensions, and reliable service, Ladhani Metal Corporation delivers proven tube protection technology trusted across multiple industries. For custom orders, sizing assistance, or to request a technical quote, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are purpose-built components designed to extend the life of boiler, heat exchanger, and process tubes by offering robust protection from erosion, scaling, and thermal impact. These shields are essential for maintaining system performance and reducing unscheduled downtime in industries that operate under demanding thermal and mechanical conditions. SS 420 Half Round Tube Shield The SS 420 Half Round Tube Shield is a semi-cylindrical protector fabricated from martensitic stainless steel grade 420. Known for its high hardness, wear resistance, and moderate corrosion resistance, SS 420 is ideally suited for applications where abrasion and mechanical stress are predominant concerns. The half-round configuration ensures a secure fit over existing tubes, creating a physical barrier against direct exposure to high-velocity gases, fly ash, and thermal shocks. Its ability to retain strength at elevated temperatures makes it suitable for use in utility boilers, air preheaters, and other high-wear process systems. Chemical Composition of SS 420 – Martensitic Stainless Steel • Carbon (C): 0.15 – 0.40% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 12.0 – 14.0% • Nickel (Ni): ≤ 0.75% • Iron (Fe): Balance Uses • Boiler Tube Protection – Provides abrasion resistance in flue gas paths, soot blower zones, and areas exposed to particulate erosion in industrial boilers. • Heat Exchanger Shielding – Minimizes mechanical damage caused by turbulent flow and particulate-laden fluids, preserving heat transfer efficiency. • Furnace Tube Guarding – Protects furnace and kiln tubes from thermal scale buildup and flame impingement in harsh operating zones. • Steam and Condensate Systems – Shields tubes from vibration, pressure cycling, and moderate steam-induced corrosion. • Ash and Gas Flow Zones – Ideal for protecting tubes in areas of fly ash impact or high-speed combustion gas flow in WTE and biomass plants. Features • High Surface Hardness – Excellent resistance to surface wear, impact, and mechanical abrasion due to its high carbon and martensitic structure. • Moderate Corrosion Resistance – Withstands oxidizing and mildly corrosive conditions up to 650°C, suitable for moderate industrial atmospheres. • Structural Integrity – Maintains strength under pressure and temperature cycling, offering long service life in mechanical protection roles. • Easy Installation – The half-round design enables fast application in the field with minimal disruption to tube layout or operation. • Finishing Options – Available in bright annealed, pickled, or passivated surfaces depending on operational requirements. • Custom Built – Offered in varied lengths, diameters, thicknesses, and attachment styles (clamp-on or weld-on) to match specific installations. Applications • Thermal and Biomass Power Stations – Used to protect boiler tubes from ash erosion and gas turbulence in high-velocity flue paths. • Cement and Steel Industries – Shields kiln and heat recovery tubes from particulate impact, slag, and high-temperature dust environments. • Waste-to-Energy Plants – Guards tubes in combustion chambers and economizers where gas stream erosion and soot buildup are persistent issues. • Oil Refineries – Applied in heat exchangers and preheater tubes exposed to abrasive flow or moderate corrosion risk. • Pulp and Paper Mills – Used in black liquor recovery boilers and steam generators handling fibrous or corrosive waste products. • Air Preheaters – Ideal for tubes located in dust-laden environments requiring protection against wear and gas abrasion. Conclusion The SS 420 Half Round Tube Shield from Ladhani Metal Corporation offers a high-performance, wear-resistant solution for tube protection in mechanically aggressive and thermally intensive environments. Its martensitic structure provides outstanding surface hardness, making it especially effective in soot blower zones, high-velocity ducts, and areas subject to abrasive particle flow. While not intended for severe chemical environments, SS 420 delivers exceptional value where mechanical durability is the top priority. With full customization options and precision manufacturing, Ladhani Metal Corporation ensures durable, reliable shielding products tailored to your plant’s exact operational needs. For technical consultations, order customization, or to request a quotation, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered protective devices used to safeguard exposed tubes in boilers, heat exchangers, steam generators, and industrial process lines. These shields are designed to reduce wear, corrosion, and thermal damage, extending tube life and optimizing system performance in harsh operational environments. SS 316L Half Round Tube Shield The SS 316L Half Round Tube Shield is a semi-cylindrical protective sleeve manufactured using stainless steel grade 316L. Known for its excellent corrosion resistance and low carbon content, SS 316L is particularly suited for welded applications and environments involving chlorides or acidic compounds. The reduced carbon level minimizes the risk of carbide precipitation during welding, making the shield ideal for continuous high-temperature service and corrosive process systems. Its half-round geometry allows for quick installation, offering a tight, secure fit over existing tubes without compromising system function. Chemical Composition of SS 316L – Austenitic Stainless Steel • Carbon (C): ≤ 0.03% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% • Iron (Fe): Balance Uses • Boiler Tube Protection – Shields boiler tubes from corrosive flue gases and thermal cycling, preventing premature failure and improving operational efficiency. • Heat Exchanger Tube Guarding – Prevents erosion, pitting, and surface scaling in systems exposed to high-velocity fluids and temperature fluctuations. • Marine and Coastal Installations – Used in salt-laden environments to resist chloride-induced corrosion in shipboard and offshore piping systems. • Process Tube Protection – Ideal for chemical and pharmaceutical industries where tubing is exposed to acidic, caustic, or reactive compounds. • Clean Steam and Sanitary Systems – Protects tubes in hygienic environments, offering corrosion resistance without contamination risks. Features • Low Carbon Content – Enhances weldability and prevents intergranular corrosion after welding, suitable for high-temperature welded assemblies. • Excellent Corrosion Resistance – Superior resistance to chlorides, acids, and oxidizing agents, making it ideal for aggressive environments. • High Durability – Withstands mechanical wear, pressure, and thermal fatigue without deformation or loss of performance. • Precision Formed – Half-round design ensures consistent tube coverage and easy field installation with welding or clamping. • Versatile Finishes – Available in pickled, passivated, or bright annealed finishes to meet both technical and aesthetic requirements. • Custom Sizing – Fabricated in various diameters, thicknesses, and lengths to match specific project dimensions and system layouts. Applications • Power and Utility Boilers – Used to protect superheater, reheater, and economizer tubes from oxidation and thermal damage. • Refineries and Chemical Plants – Shields high-temperature process tubes from corrosive gases and fluctuating chemical exposure. • Desalination and Water Treatment – Applied in brine heaters and evaporators to guard against saltwater corrosion. • Pharmaceutical Manufacturing – Suitable for steam and utility lines in cleanrooms and sterile process environments. • Food and Beverage Industry – Protects steam and pasteurization tubes in CIP systems, ensuring hygiene and corrosion resistance. • Pulp and Paper Mills – Guards recovery boiler tubes from corrosive byproducts and erosive steam flows. Conclusion The SS 316L Half Round Tube Shield from Ladhani Metal Corporation is a high-performance solution designed to enhance the reliability and service life of tubes in corrosive and high-temperature applications. Its low carbon content provides superior weldability and protection against intergranular attack, making it ideal for welded systems and continuous exposure to harsh conditions. Whether in power generation, food processing, marine, or chemical industries, these shields deliver consistent performance, reduced downtime, and long-term value. With customizable options, premium material sourcing, and expert craftsmanship, Ladhani Metal Corporation remains a trusted manufacturer of precision-engineered tube shielding products. For technical details, quotation requests, or custom fabrication inquiries, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are high-precision protective components designed to shield boiler and heat exchanger tubes from erosion, high-temperature scaling, and aggressive gas flows. Crafted from superior stainless steel alloys, these shields enhance equipment reliability and performance in demanding industrial conditions. SS 310 Half Round Tube Shield The SS 310 Half Round Tube Shield is a semi-circular metallic shield fabricated using premium stainless steel grade 310, known for its outstanding resistance to oxidation, scaling, and corrosion at elevated temperatures. This shield is specifically designed for use in environments involving extreme thermal cycling, aggressive combustion gases, and high mechanical stress. The half-round configuration ensures easy, secure installation over exposed tubes, forming a protective barrier that extends component life and reduces maintenance costs. Chemical Composition of SS 310 – Austenitic Stainless Steel • Carbon (C): ≤ 0.25% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.50% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Uses : • Boiler Tube Protection – Shields boiler tubes from direct exposure to high-temperature flue gases, reducing metal loss due to oxidation and abrasive ash erosion in thermal power plants. • Heat Exchanger Tube Shielding – Provides a protective layer against high-temperature corrosion and flow-induced wear, preserving efficiency and reducing failure risks. • Furnace Tube Safeguarding – Resists flame impingement and scale buildup in industrial furnaces, extending the life of radiant and convection section tubes. • Petrochemical Process Protection – Used in reactors and reformers where exposure to hot process gases and thermal cycling can severely damage unprotected tubes. • Steam Superheater and Reheater Systems – Guards tubes from surface deterioration in high-pressure steam circuits, improving operational longevity and safety. Features : • High-Temperature Resistance – SS 310 maintains structural integrity at temperatures up to 1100°C, ideal for high-heat zones in boilers and furnaces. • Corrosion and Oxidation Resistance – Superior chromium and nickel content ensures excellent resistance to oxidation, scaling, and carburization even under continuous thermal exposure. • Precision Half-Round Design – Ensures a tight, secure fit on existing tube surfaces, enabling quick installation and easy replacement without interrupting system performance. • Custom Fabrication – Available in various thicknesses, lengths, and diameters to suit different tube sizes and geometries, with optional welding or clamping attachments. • Surface Finishing Options – Offered in bright annealed, pickled, or passivated finishes for enhanced appearance and additional surface protection. Applications : • Thermal Power Plants – Protects superheater and economizer tubes from soot erosion, slagging, and thermal stress caused by high-velocity flue gases. • Oil Refineries and Petrochemical Plants – Installed on high-temperature piping and reformer tubes exposed to corrosive gases, thermal cycling, and process variability. • Heat Recovery Steam Generators (HRSGs) – Enhances tube durability in combined-cycle plants where steam tubes face aggressive exhaust gas flow. • Chemical Processing Equipment – Applied in heat exchanger and reactor tubes that handle chemically reactive or acidic compounds at elevated temperatures. • Industrial Steam Boilers – Used in high-pressure steam systems across food, textile, pulp & paper, and marine industries to extend tube life and ensure safe operation. Conclusion The SS 310 Half Round Tube Shield by Ladhani Metal Corporation is a premium solution engineered for the most demanding high-temperature and corrosive environments. Its exceptional resistance to oxidation, scaling, and thermal fatigue makes it ideal for use in power plants, refineries, and process industries where tube protection is critical for safety and efficiency. By extending the life of boiler and heat exchanger tubes, reducing downtime, and minimizing repair costs, these shields offer long-term value and dependable performance. With custom sizing, precision fabrication, and strict quality control, Ladhani Metal Corporation delivers reliable shielding solutions tailored to meet the toughest industrial challenges. For technical inquiries, customization options, or to request a quote, please contact Ladhani Metal Corporation.