Ladhani Metal Corporation offers 1Cr13 Half Round Tube Shields designed to protect reheater (R/H) tubes in boilers, power plants, and industrial steam systems. Reheater tubes carry steam through the reheater section of the boiler, where it is reheated after partial expansion in the high-pressure turbine to improve efficiency and minimize moisture formation. Manufactured from martensitic stainless steel grade 1Cr13, these shields provide good mechanical strength, oxidation resistance, and reliable protection against erosion and wear in high-temperature boiler environments. Function of R/H Tubes • Carry steam through the reheater section of the boiler • Exposed to very high temperatures (often > 540°C) and erosion from flue gases • Often protected with Half Round Tube Shields in high-velocity and ash-laden zones Ladhani Metal Corporation manufactures, supplies, and exports 1Cr13 Half Round Tube Shields in a variety of lengths, diameters, and thicknesses to meet both domestic and international requirements. 1Cr13 Grade Chemical Composition – Martensitic Stainless Steel • Carbon (C): ≤ 0.15% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 12.00 – 14.00% • Nickel (Ni): ≤ 0.60% • Iron (Fe): Balance Applications: Well-suited for reheater tubes in thermal power plants, industrial steam plants, and boilers requiring strong mechanical performance with moderate corrosion and oxidation resistance. Uses • Shields reheater tubes from erosion and flue gas oxidation • Protects against soot blower impact and abrasive ash particles • Extends service life of steam circuit components under elevated temperatures • Commonly used in WHRBs, HRSGs, and industrial boilers Features • Strong mechanical strength at high temperatures • Moderate oxidation and corrosion resistance in boiler atmospheres • Cost-effective solution for erosion-prone areas • Manufactured for precise fit and easy installation Applications • Power generation boilers – Protection for reheater sections exposed to erosion • Waste heat recovery boilers – Guards tubes from abrasive gas flows • Industrial steam systems – Reliable under medium-to-high temperature cycles • Process boilers – Provides extended service life in erosive conditions Conclusion The 1Cr13 Half Round Tube Shield for Reheater (R/H) Tubes by Ladhani Metal Corporation provides durable, cost-effective protection for boiler tubes exposed to erosion and high-temperature oxidation. Designed for precision fit and long service life, these shields are available in a wide range of export-ready specifications. For supply and technical inquiries, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #HalfRoundReheaterShield #ReheaterTubeShield #BoilerReheaterProtection #PowerPlantTubeShield #BoilerErosionShield #SteamBoilerTubeShield #HighTempTubeShield #BoilerWearProtection

Ladhani Metal Corporation offers SS 430 Half Round Tube Shields specially designed to protect reheater (R/H) tubes in boilers, power plants, and industrial steam systems. Reheater tubes carry steam through the reheater section of the boiler, where it is reheated after partial expansion in the high-pressure turbine to improve efficiency and minimize moisture. Manufactured from ferritic stainless steel grade SS 430, these shields provide excellent resistance to oxidation, scaling, and moderate corrosion while offering good thermal conductivity and formability for long-term service in demanding boiler environments. Function of R/H Tubes • Carry steam through the reheater section of the boiler • Exposed to very high temperatures (often > 540°C) and erosion from flue gases • Often protected with Half Round Tube Shields in high-velocity and ash-laden zones Ladhani Metal Corporation manufactures, supplies, and exports SS 430 Half Round Tube Shields in different lengths, diameters, and thicknesses, ensuring suitability for a wide range of domestic and international boiler applications. SS 430 Grade Chemical Composition – Ferritic Stainless Steel • Carbon (C): ≤ 0.12% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.00 – 18.00% • Nickel (Ni): ≤ 0.50% • Iron (Fe): Balance Applications: Commonly used in reheater sections of thermal power plants, waste heat recovery boilers (WHRBs), and heat recovery steam generators (HRSGs) where scaling resistance and cost-effective protection are required. Uses • Shields reheater tubes against erosion, scaling, and oxidation • Protects R/H tubes in zones exposed to high flue gas velocity and ash particles • Extends tube service life under thermal cycling and corrosive atmospheres • Applicable in utility boilers, WHRBs, HRSGs, and process steam plants Features • Excellent resistance to oxidation and scaling at elevated temperatures • Cost-effective protection with good mechanical strength • Superior thermal conductivity for stable heat transfer • Custom-fit design for precise installation and maximum coverage Applications • Power generation boilers – Reheater tube protection in oxidizing atmospheres • Waste heat recovery systems – Reliable shield against particle erosion • Industrial boilers – Durable under varying flue gas conditions • Petrochemical and process plants – Efficient in moderate corrosive service environments Conclusion The SS 430 Half Round Tube Shield for Reheater (R/H) Tubes by Ladhani Metal Corporation offers dependable, cost-effective protection against scaling, oxidation, and erosion in high-temperature boiler conditions. With good mechanical strength and precision fit, these shields reduce maintenance needs and extend tube service life. Available in customized, export-ready specifications to meet global industry requirements. For supply and technical assistance, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #HalfRoundReheaterShield #ReheaterTubeShield #BoilerReheaterProtection #PowerPlantTubeShield #BoilerErosionShield #SteamBoilerTubeShield #HighTempTubeShield #BoilerWearProtection

Ladhani Metal Corporation offers SS 420 Half Round Tube Shields designed to protect reheater (R/H) tubes in boilers, power plants, and industrial steam systems. Reheater tubes carry steam through the reheater section of the boiler, where the steam is reheated after partial expansion in the high-pressure turbine to improve efficiency and reduce moisture formation. Manufactured from martensitic stainless steel grade SS 420, these shields provide excellent hardness, wear resistance, and moderate corrosion resistance, making them suitable for harsh high-temperature boiler conditions. Function of R/H Tubes • Carry steam through the reheater section of the boiler • Exposed to very high temperatures (often > 540°C) and erosion from flue gases • Often protected with Half Round Tube Shields in high-velocity and ash-laden zones Ladhani Metal Corporation manufactures, supplies, and exports SS 420 Half Round Tube Shields in a wide range of diameters, lengths, and thicknesses to meet the requirements of both domestic and international industries. SS 420 Grade Chemical Composition – Martensitic Stainless Steel • Carbon (C): 0.15 – 0.40% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 12.00 – 14.00% • Iron (Fe): Balance Applications: Well-suited for reheater sections in thermal power plants, waste heat recovery boilers (WHRBs), and heat recovery steam generators (HRSGs) where high hardness and wear resistance are required along with resistance to scaling and oxidation. Uses • Protects reheater tubes from erosion, scaling, and soot blower damage • Shields R/H tubes in abrasive flue gas zones • Extends operational life of high-temperature steam system components • Applicable in power boilers, HRSGs, WHRBs, and petrochemical process heaters Features • High hardness and superior wear resistance • Good scaling and oxidation resistance at elevated temperatures • Strong mechanical strength under thermal stress • Precision-engineered design for secure tube coverage Applications • Power generation boilers – Protection for R/H tubes in high-temperature zones • Waste heat recovery systems – Guards against particle erosion and scaling • Industrial steam boilers – Performs well under severe flue gas exposure • Petrochemical and process plants – Suitable for harsh reheating environments Conclusion The SS 420 Half Round Tube Shield for Reheater (R/H) Tubes by Ladhani Metal Corporation provides reliable, durable protection against erosion, scaling, and high-temperature wear. Combining excellent hardness with moderate corrosion resistance, these shields enhance boiler efficiency, extend tube service life, and minimize downtime. Available in export-ready specifications and customized sizes to meet global industry demands. For technical support and supply inquiries, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #HalfRoundReheaterShield #ReheaterTubeShield #BoilerReheaterProtection #PowerPlantTubeShield #BoilerErosionShield #SteamBoilerTubeShield #HighTempTubeShield #BoilerWearProtection

Ladhani Metal Corporation offers SS 410 Half Round Tube Shields engineered to protect reheater (R/H) tubes in boilers, power plants, and industrial steam systems. Reheater tubes carry steam through the reheater section of the boiler, where the steam is reheated after partial expansion in the high-pressure turbine to enhance efficiency and prevent condensation. Made from martensitic stainless steel grade SS 410, these shields provide excellent resistance to oxidation, scaling, and moderate corrosion at elevated temperatures, while also delivering high mechanical strength and wear resistance. Function of R/H Tubes • Carry steam through the reheater section of the boiler • Exposed to very high temperatures (often > 540°C) and erosion from flue gases • Often protected with Half Round Tube Shields in high-velocity and ash-laden zones Ladhani Metal Corporation manufactures, supplies, and exports SS 410 Half Round Tube Shields in multiple sizes, thicknesses, and diameters to meet the needs of domestic and international industries. SS 410 Grade Chemical Composition – Martensitic Stainless Steel • Carbon (C): ≤ 0.15% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 11.50 – 13.50% • Iron (Fe): Balance Applications: Ideal for reheater sections in thermal power plants, waste heat recovery boilers (WHRBs), and heat recovery steam generators (HRSGs), particularly in environments where oxidation, scaling, and abrasive wear are prevalent. Uses • Protects reheater tubes against erosion, scaling, and oxidation • Shields R/H tubes exposed to abrasive flue gas particles • Extends service life of steam system components under thermal stress • Applicable in utility boilers, HRSGs, WHRBs, and petrochemical steam units Features • Good oxidation and scaling resistance at high temperatures • Strong mechanical properties with excellent wear resistance • Cost-effective stainless steel option for boiler protection • Precision-engineered half round fit for reliable tube coverage Applications • Power generation boilers – Reliable protection for reheater tubes under high stress • Waste heat recovery systems – Defense against flue gas erosion and scaling • Industrial steam boilers – Consistent performance under thermal cycling • Petrochemical plants – Effective in reheater sections with moderate corrosive exposure Conclusion The SS 410 Half Round Tube Shield for Reheater (R/H) Tubes by Ladhani Metal Corporation provides durable and cost-effective protection against erosion, scaling, and oxidation in high-temperature boiler environments. With excellent wear resistance and precision fit, these shields extend tube service life while reducing maintenance costs. Available in customized dimensions and export-ready specifications to meet global requirements. For technical assistance and supply inquiries, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #HalfRoundReheaterShield #ReheaterTubeShield #BoilerReheaterProtection #PowerPlantTubeShield #BoilerErosionShield #SteamBoilerTubeShield #HighTempTubeShield #BoilerWearProtection

Ladhani Metal Corporation offers Cr23Ni13 Boiler Half Round Tube Shields designed for high-performance tube protection in industrial boilers and heat exchangers operating under elevated temperature and corrosive conditions. Manufactured from an austenitic heat-resistant stainless steel alloy containing high chromium and nickel content, Cr23Ni13 provides excellent resistance to oxidation, carburization, and scaling. These shields are precisely formed into a half-round profile for accurate fitting over straight sections of boiler tubes. They serve as a robust barrier against abrasive flue gases, soot blower impact, and high-velocity particulate erosion, significantly increasing tube lifespan and reducing maintenance downtime. Ladhani Metal Corporation manufactures, supplies, and exports Cr23Ni13 Boiler Half Round Tube Shields in various sizes, lengths, and thicknesses to meet the specific requirements of domestic and international clients. Cr23Ni13 Grade Chemical Composition – Heat Resistant Austenitic Stainless Steel • Carbon (C): ≤ 0.20% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.50% • Chromium (Cr): 22.00 – 24.00% • Nickel (Ni): 12.00 – 14.00% • Iron (Fe): Balance Applications: Suitable for high-temperature boilers, waste heat recovery units, and process heaters Uses • Shields straight boiler tubes in superheater and reheater sections • Protects against oxidation, scaling, and abrasive flue gas erosion • Ideal for applications requiring moderate carburization resistance • Extends service life in high-heat process and power generation equipment Features • High chromium-nickel alloy – Ensures superior scaling and oxidation resistance • Good thermal stability – Maintains mechanical strength at elevated temperatures • Precision half-round profile – Guarantees accurate tube coverage and fitment • Durable construction – Withstands abrasive and corrosive flue gas conditions • Versatile installation – Compatible with welding, clamping, or banding methods • Export quality – Manufactured to meet international dimensional and quality standards Applications • Power plants – Protects tubes in superheater and reheater assemblies • Waste heat recovery systems – Guards against oxidation in high-temperature gas flow areas • Petrochemical process heaters – Resists carburization in refinery furnace atmospheres • Cement and metallurgy industries – Offers protection in abrasive and thermal cycling conditions Conclusion The Cr23Ni13 Boiler Half Round Tube Shield from Ladhani Metal Corporation is engineered for reliable performance in high-temperature and corrosive boiler environments. With its optimal chromium-nickel balance, it delivers strong resistance to oxidation and scaling while maintaining structural integrity. Available in customized dimensions for both domestic supply and global export, these shields provide dependable and long-lasting boiler tube protection. For technical specifications and order assistance, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield

Ladhani Metal Corporation offers 1Cr25Ni20Si2 Boiler Half Round Tube Shields engineered for superior protection of boiler tubes in extremely high-temperature and abrasive service environments. Manufactured from a heat-resistant austenitic stainless steel alloy with high chromium, nickel, and silicon content, 1Cr25Ni20Si2 delivers exceptional resistance to oxidation, carburization, and high-temperature scaling. The added silicon improves anti-oxidation properties and enhances structural stability during prolonged thermal exposure. These shields are precision-formed into a half-round profile to ensure accurate coverage of straight boiler tube sections. They provide a durable physical barrier against flue gas erosion, soot blower impact, and particle-laden gas flow, significantly extending the operational life of boiler tubes. Ladhani Metal Corporation manufactures, supplies, and exports 1Cr25Ni20Si2 Boiler Half Round Tube Shields in a wide range of sizes, thicknesses, and lengths, catering to both domestic and international markets. 1Cr25Ni20Si2 Grade Chemical Composition – Heat Resistant Austenitic Stainless Steel • Carbon (C): ≤ 0.12% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): 1.50 – 2.50% • Chromium (Cr): 24.00 – 26.00% • Nickel (Ni): 19.00 – 22.00% • Iron (Fe): Balance Uses • Shields straight boiler tubes in superheaters, reheaters, and economizers • Protects against oxidation, scaling, and particulate erosion • Suitable for carburizing and high-silicon demanding environments • Extends tube life in power generation and process heating units Features • Enhanced oxidation resistance – Silicon addition boosts scale resistance at extreme temperatures • Superior thermal stability – Maintains mechanical integrity during prolonged heat exposure • Precision-engineered profile – Ensures a secure and accurate fit over boiler tubes • Flexible installation – Can be welded, clamped, or banded based on site requirements • Export-ready – Compliant with international quality and dimensional standards Applications • Thermal power stations – Protects superheater and reheater tubes from oxidation and erosion • Waste heat boilers – Guards tubes in severe heat recovery operations • Petrochemical and refinery heaters – Resists carburization in furnace conditions • Metallurgy and cement industries – Provides reliable tube protection under abrasive, high-heat gas flows Conclusion The 1Cr25Ni20Si2 Boiler Half Round Tube Shield from Ladhani Metal Corporation is designed for extreme service conditions where oxidation, scaling, and high-temperature wear are major concerns. With its silicon-enhanced heat-resistant alloy composition and precise manufacturing, it ensures prolonged boiler tube life and reduced downtime. Available in customized sizes for both domestic and export orders, these shields offer dependable performance in the world’s toughest boiler and furnace environments. For specifications and order inquiries, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield

Ladhani Metal Corporation offers SS 304 Boiler Tube Shields engineered to protect straight boiler and heat exchanger tubes from erosion, oxidation, and impact damage in aggressive thermal environments. Manufactured from austenitic stainless steel grade SS 304, these shields provide excellent corrosion resistance, good mechanical strength, and thermal stability at high operating temperatures. SS 304 is widely used in applications where exposure to flue gases, steam, and particulate matter demands reliable, long-term protection. The half-round design is precision-formed to match the curvature of straight boiler tubes, ensuring a snug and secure fit. This close contact minimizes tube exposure to abrasive particles, high-velocity gases, and soot blower impact. The shields serve as a durable physical barrier, extending tube life and reducing the frequency of costly maintenance and replacements. Ladhani Metal Corporation manufactures, supplies, and exports SS 304 Boiler Tube Shields in a variety of lengths, diameters, and thicknesses to suit specific application requirements across domestic and international markets. SS 304 Grade Chemical Composition – Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 10.5% • Iron (Fe): Balance Applications: Suitable for thermal power stations, process heaters, WHRBs, HRSGs, and chemical industries operating under corrosive and high-heat environments. Uses • Protection of straight boiler tubes from erosion and oxidation • Installed in radiant and convection zones of boilers • Shields against soot blower damage in utility boilers • Used in HRSG and WHRB systems exposed to flue gases • Ideal for chemical, food, and textile processing boilers Features • Excellent corrosion resistance – Performs in oxidizing and mildly acidic environments • High thermal durability – Maintains strength at elevated temperatures • Long service life – Minimizes wear and reduces maintenance intervals • Easy to install – Can be clamped, tack welded, or banded • Custom-built – Available in varied lengths, thicknesses, and diameters • Export-ready – Manufactured to meet international standards Applications • Power plants – Steam generator tube protection from scale and erosion • Refineries and petrochemical units – For tube shielding in process heaters • Waste heat recovery systems – In cement, steel, and glass industries • Industrial boilers – Where high temperature and flue gas exposure are present Conclusion The SS 304 Boiler Tube Shield from Ladhani Metal Corporation delivers robust and corrosion-resistant protection for straight tubes exposed to harsh thermal and gaseous environments. With high-grade austenitic stainless steel construction, precise fit, and customizable dimensions, these shields are ideal for domestic and global boiler systems. For technical consultation, material selection, or custom orders, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #halftubeshield #utypehalftubeshield #tubeshieldexporter

Ladhani Metal Corporation offers Cr23Ni13 Outer Half Round 90 Degree Bend Tube Shields designed to protect the outer arc of U-bends and 90-degree curved tubes used in high-temperature and mildly corrosive environments. The semi-cylindrical design is precision-formed to match the curvature of return bends in boiler and furnace tubing, creating a durable barrier against erosion from high-velocity flue gases, ash abrasion, and soot blower jets. These shields are widely applied in boilers, heat recovery systems, and process heaters where thermal protection and resistance to surface degradation are critical. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of Cr23Ni13 Outer Half Round 90 Degree Bend Tube Shields, offering custom solutions to suit various tube sizes and system configurations. Cr23Ni13 Grade Chemical Composition – Austenitic Stainless Steel • Carbon (C): ≤ 0.12% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 22.0 – 24.0% • Nickel (Ni): 12.0 – 14.0% • Iron (Fe): Balance Uses • Protection of 90-degree return bends in superheaters and reheaters exposed to clean or moderately corrosive flue gas • Applied in WHRB and HRSG systems in power generation and industrial processing • Shields tube curves from oxidation, scaling, and erosive gas flow • Used in high-temperature furnaces and exhaust systems requiring heat resistance and structural stability Features • Reliable heat resistance – Performs effectively under sustained high-temperature exposure • Good corrosion performance – Withstands oxidizing environments and dry gas corrosion • Stable under thermal stress – Resists deformation and fatigue during repeated heating cycles • Precision fit – Manufactured to match specified bend radii for seamless tube coverage • Installation flexibility – Can be clamped, tack welded, or banded for secure placement • Variety of configurations – Available in multiple sizes, thicknesses, and arc lengths Applications • Power and utility boilers – Protects tubing bends in elevated heat zones from surface wear • Petrochemical industry – Used in tube shields for fired heaters and process heat exchangers • Cement and metallurgical plants – Guards heat exchange coils from oxidation and abrasive particles • Industrial thermal systems – Ensures longevity of tubing in dry, high-temperature flue gas environments Conclusion The Cr23Ni13 Outer Half Round 90 Degree Bend Tube Shield by Ladhani Metal Corporation provides dependable thermal and corrosion protection for tube bends in high-temperature systems. With its austenitic composition and balanced alloy content, this shield is ideal for applications requiring durability, thermal reliability, and moderate corrosion resistance. For product customization, technical support, or material inquiries, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #halftubeshield #utypehalftubeshield #tubeshieldexporter

Ladhani Metal Corporation offers robust SS 410 Outer Half Round 90 Degree Bend Tube Shields designed to protect the outer curvature of 90-degree bends and U-bend tubes in boilers, heat exchangers, reheaters, and waste heat recovery systems. Manufactured from martensitic stainless steel grade SS 410, these shields provide excellent resistance to abrasion, scaling, and thermal fatigue, making them ideal for high-wear zones where mechanical durability is critical. The semi-cylindrical shield conforms to the outer arc of curved tubes, forming a physical barrier that prevents fly ash erosion, gas flow impingement, and high-temperature wear. Widely used in power plants and industrial steam systems, these shields ensure longer tube life and reduce unplanned maintenance. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of SS 410 Outer Half Round 90 Degree Bend Tube Shields, offering custom-made solutions tailored to plant specifications and coil geometries. SS 410 Grade Chemical Composition – Martensitic Stainless Steel • Carbon (C): 0.08 – 0.15% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 11.5 – 13.5% • Nickel (Ni): ≤ 0.75% • Iron (Fe): Balance Applications: Ideal for high-wear, moderately corrosive environments such as power boilers, WHRBs, HRSGs, and industrial heaters. Uses • Shielding 90-degree return bends in boilers and reheaters • Protecting U-bend tubes in WHRBs and flue gas systems • Guarding tube bends in waste heat sections of thermal processing units • Applied in environments where erosion from ash or particulate flow is prevalent Features • Excellent wear resistance – Ideal for abrasive service conditions • Thermal stability – Maintains strength and hardness at elevated temperatures • Mechanical durability – Withstands impact, vibration, and cyclic stresses • Accurate fit – Precision-shaped to match tube bend radius and diameter • Installation flexibility – Can be clamped, welded, or banded securely • Custom options – Available in various lengths, radii, and wall thicknesses Applications • Thermal power plants – Protects critical bend zones in high-ash areas • WHRBs and HRSGs – Used in exhaust recovery systems exposed to soot and gas flow • Petrochemical units – Applied in high-temperature reformers and heaters • Cement and process industries – Guards curved tube surfaces from scale and erosion Conclusion The SS 410 Outer Half Round 90 Degree Bend Tube Shield by Ladhani Metal Corporation is a durable and cost-effective solution for protecting curved boiler and heat exchanger tubes in abrasive and thermal environments. With superior wear resistance and reliable mechanical strength, it extends service life and enhances equipment performance. For custom sizing, material selection, or technical specifications, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #halftubeshield #utypehalftubeshield #tubeshieldexporter