Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are protective components engineered to shield boiler tubes, superheaters, and heat exchangers from erosion, scaling, and ash impact. These shields are widely used in thermal power plants, industrial steam systems, and waste heat recovery units to prolong tube life and enhance operational reliability. Their semi-cylindrical shape allows for easy installation over exposed tube surfaces, especially in zones exposed to abrasive flue gases and thermal stress. SS 310S Half Round Tube Shield for LTSH Tube The SS 310S Half Round Tube Shield is manufactured from low-carbon austenitic stainless steel grade 310S. With high chromium and nickel content, it offers excellent resistance to oxidation and scaling at elevated temperatures, while its reduced carbon level enhances weldability and reduces the risk of sensitization. This makes it ideal for Low Temperature Superheater (LTSH) applications, where tubes are exposed to flue gas streams, ash particles, and moderate thermal cycling. The Low Temperature Superheater (LTSH) is a section in a boiler where saturated steam from the steam drum is superheated to a moderately higher temperature before entering the high-temperature superheater stages. Positioned in areas with relatively lower flue gas temperatures, the LTSH helps improve thermal efficiency and reduces moisture content in steam. Due to constant exposure to abrasive flue gases and ash, LTSH tubes are prone to wear and require protective shielding, such as half round tube shields, to extend service life. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of SS 310S Half Round Tube Shields for LTSH tubes, offering high-performance shielding solutions for long-term service in boiler and heat recovery systems. Chemical Composition of SS 310S – Low Carbon Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.50% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Applications: Suitable for areas with exposure to moderate temperatures, oxidizing gases, and ash deposition where high-temperature strength and corrosion resistance are critical. Uses • Protects LTSH tubes in power boilers from ash erosion, soot impact, and flue gas corrosion • Used in convection zones of HRSGs, economizers, and waste heat recovery units • Shields tube surfaces in steam generation systems exposed to gas turbulence and thermal cycling • Effective in industrial heating systems and chemical boilers facing scale formation and heat stress • Enhances durability of tubes in coal-fired and biomass-fired boilers with fly ash carryover Features • Excellent oxidation and scaling resistance – Performs in oxidizing environments and thermal zones • Superior weldability – Low carbon content minimizes risk of intergranular corrosion during welding • Tailored protection – Custom-fabricated to match tube diameter, bend radius, and system layout • Simple installation – Compatible with clamping, banding, or welding methods for quick setup • Extended tube life – Minimizes erosion and surface degradation, reducing maintenance downtime • Available in various lengths and thicknesses per system requirements Applications • thermal power plants – Installed on LTSH tube banks for long-term protection against erosion and corrosion • waste heat recovery boilers – Shields curved tubes in return flow zones with ash-laden flue gas • petrochemical units – Applied on steam coils and heat exchanger tubes operating under oxidizing gas exposure • utility boilers – Protects superheater tubes from scaling and particulate impact in low-temperature sections • industrial boiler systems – Enhances performance and service life of steam tubes in energy recovery zones Conclusion The SS 310S Half Round Tube Shield for LTSH Tube by Ladhani Metal Corporation – manufacturer, supplier, and exporter – offers reliable protection for superheater tubes operating in low-temperature, oxidizing, and abrasive flue gas environments. With enhanced weldability, high-temperature resistance, and custom-fit fabrication, this shield ensures dependable performance across a wide range of thermal and industrial applications. For technical assistance, tailored designs, or quotation requests, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are essential components used to protect heat exchanger tubes, boiler coils, and superheater assemblies from erosion, scaling, slag buildup, and high-temperature corrosion. Designed with a semi-cylindrical profile, they offer easy installation over straight or curved tube surfaces. These shields play a vital role in increasing service life, reducing tube maintenance, and ensuring the efficient operation of thermal systems across power generation, chemical processing, and petrochemical industries. 1Cr25Ni20Si2 U Type Inner Half Round Tube Shield The 1Cr25Ni20Si2 U Type Inner Half Round Tube Shield is fabricated from a high-temperature resistant chromium-nickel-silicon alloy steel. This grade offers excellent resistance to oxidation, sulfur corrosion, and thermal fatigue, even under prolonged exposure to temperatures above 1000°C. The inner U-type configuration is specifically designed to shield the internal curvature of U-bend tubes, a zone vulnerable to accelerated wear caused by flue gas turbulence, slag impact, and thermal cycling. • Inner U Type Half Round Tube Shield – Designed to cover the inside arc of U-bend tubes, offering protection from erosion, scale formation, and heat stress. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of 1Cr25Ni20Si2 U Type Inner Half Round Tube Shields, providing high-performance protective solutions for extreme temperature and chemically aggressive environments. Chemical Composition of 1Cr25Ni20Si2 – High Temperature Alloy Steel • Carbon (C): ≤ 0.20% • Manganese (Mn): ≤ 1.50% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): 1.80 – 2.50% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Applications: Suited for high-temperature environments with oxidizing, sulfurizing, or carburizing gases. Especially effective in boiler, furnace, and WHRB systems operating under cyclic thermal conditions. Uses • Installed on the inner arc of U-bend tubes in power plant boilers and superheaters exposed to slag and thermal stress • Protects curved tube bends in WHRBs, HRSGs, and reformers subjected to flue gas erosion and oxidation • Applied in heat exchangers and reactors operating in high-temperature and chemically active atmospheres • Used in furnace coils, metallurgical plants, and incinerators for protection from sulfur-laden and high-heat gas streams • Suitable for curved tube coils in petrochemical and process industries where scaling and corrosion are common Features • Excellent oxidation resistance – Performs effectively at continuous service temperatures up to 1100°C • Superior inner arc protection – Covers high-wear zones exposed to heat, slag, and turbulent gas flow • Enhanced thermal fatigue resistance – Designed for use in cyclic heating environments without distortion • Corrosion resistance – Withstands acid gases and sulfur-rich flue gases common in industrial combustion systems • Precision fitment – Fabricated to match specific tube sizes and bend radii for optimal protection and stability • Easy installation – Can be fixed using clamping, tack welding, or banding methods depending on system design Applications • power generation – Shields inner U-bend tubes in superheaters and reheaters from high-temperature erosion • waste heat recovery – Used in WHRBs and HRSGs to protect internal arcs against scaling and oxidation • petrochemical processing – Protects U-bend tubes in reformers and exchangers exposed to acidic gas streams • chemical industry – Ensures long-lasting performance in reactors and thermal processing equipment • metallurgical and furnace systems – Applied where high heat and slag exposure are routine Conclusion The 1Cr25Ni20Si2 U Type Inner Half Round Tube Shield by Ladhani Metal Corporation – manufacturer, supplier, and exporter – provides high-strength, heat-resistant shielding for the internal arcs of U-bend tubes operating in severe industrial environments. Its resistance to oxidation, corrosion, and thermal fatigue makes it a dependable solution for extending equipment life and performance under extreme conditions. For custom sizes, technical support, or pricing inquiries, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered components used to protect boiler and heat exchanger tubes from erosion, scaling, and high-temperature corrosion. These shields are widely applied in industrial systems exposed to thermal cycling, aggressive gases, and particulate flow. Their half-round shape allows for simple and secure installation over straight or curved tube surfaces, extending tube life and reducing maintenance needs. SS 316 U Type Half Round Tube Shield The SS 316 U Type Half Round Tube Shield is specifically designed to protect U-bend sections in superheaters, reheaters, and heat exchanger coils. Manufactured from SS 316, a molybdenum-bearing austenitic stainless steel, it offers enhanced resistance to pitting, crevice corrosion, and chloride-induced attack. The U-type design ensures precise coverage over tube bends, where erosion and heat damage are most intense. Both inner and outer U configurations are available for comprehensive protection. • Outer U Type Half Round Tube Shield – Protects the outer curvature of the U-bend from flame impingement, slag buildup, and high-velocity gas erosion. • Inner U Type Half Round Tube Shield – Shields the inner arc of the bend against turbulence-induced wear, localized corrosion, and scaling. Ladhani Metal Corporation is a trusted manufacturer and exporter of SS 316 U Type Half Round Tube Shields, delivering high-performance solutions for industries requiring superior corrosion resistance and heat tolerance. Chemical Composition of SS 316 – Austenitic Stainless Steel with Molybdenum • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% • Iron (Fe): Balance Applications: Best suited for environments with exposure to chlorides, steam, and acidic gases, where resistance to corrosion and heat is critical. Uses • Protection of U-bend tubes in high-temperature boiler coil sections • Shielding tube bends in chemical heat exchangers and steam reformers • Coverage for WHRB tube bends exposed to abrasive flue gas streams • Safeguarding curved tubes in condensers, superheaters, and evaporators • Ideal for corrosive and chloride-laden environments in marine or coastal installations Features • Excellent corrosion resistance – Made from SS 316 with molybdenum, offering superior protection against pitting, crevice corrosion, and acidic gas exposure. • High-temperature performance – Performs reliably in high-heat environments, withstanding oxidation and thermal stress during prolonged operation. • Dual-side coverage – Available in both inner and outer U-type configurations for full protection of return bends in heat exchanger and boiler systems. • Precision fitment – Custom-fabricated to match tube radius and diameter for a tight, secure fit that prevents movement and surface exposure. • Easy to install – Designed for quick and secure mounting using clamps, tack welds, or banding without requiring system disassembly. • Custom dimensions – Available in a wide range of lengths, thicknesses, and tube radii to meet exact design and performance requirements. Applications • thermal power plants – Used on U-bend tubes in superheaters and reheaters to resist flue gas corrosion and scaling. Enhances service life and reduces downtime in high-temperature zones. • petrochemical plants – Shields tube bends in steam reformers and exchangers exposed to chlorides and process gases. Provides robust corrosion protection in aggressive chemical environments. • waste heat recovery systems (WHRBs) – Protects curved tubes in exhaust gas streams from slag erosion and thermal shock. Improves long-term durability under fluctuating temperatures and gas flow. • chemical and fertilizer industries – Installed on tube bends in reactors and ammonia reformers for corrosion and erosion resistance. Helps prevent pitting and degradation from acidic and chloride-containing media. • HRSGs and industrial boilers – Used in return bends to prevent surface scaling and heat-induced fatigue. Maintains structural integrity and energy efficiency in cyclic operating conditions. Conclusion The SS 316 U Type Half Round Tube Shield by Ladhani Metal Corporation offers a dependable solution for protecting U-bend tubes in corrosive and high-temperature environments. Its superior resistance to chlorides, acids, and oxidizing gases makes it ideal for petrochemical, power, and chemical industries. Designed for durability, precision fit, and ease of installation, these shields are fully customizable to your specific system requirements. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are purpose-built components designed to extend the life of boiler, heat exchanger, and process tubes by offering robust protection from erosion, scaling, and thermal impact. These shields are essential for maintaining system performance and reducing unscheduled downtime in industries that operate under demanding thermal and mechanical conditions. SS 420 Half Round Tube Shield The SS 420 Half Round Tube Shield is a semi-cylindrical protector fabricated from martensitic stainless steel grade 420. Known for its high hardness, wear resistance, and moderate corrosion resistance, SS 420 is ideally suited for applications where abrasion and mechanical stress are predominant concerns. The half-round configuration ensures a secure fit over existing tubes, creating a physical barrier against direct exposure to high-velocity gases, fly ash, and thermal shocks. Its ability to retain strength at elevated temperatures makes it suitable for use in utility boilers, air preheaters, and other high-wear process systems. Chemical Composition of SS 420 – Martensitic Stainless Steel • Carbon (C): 0.15 – 0.40% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 12.0 – 14.0% • Nickel (Ni): ≤ 0.75% • Iron (Fe): Balance Uses • Boiler Tube Protection – Provides abrasion resistance in flue gas paths, soot blower zones, and areas exposed to particulate erosion in industrial boilers. • Heat Exchanger Shielding – Minimizes mechanical damage caused by turbulent flow and particulate-laden fluids, preserving heat transfer efficiency. • Furnace Tube Guarding – Protects furnace and kiln tubes from thermal scale buildup and flame impingement in harsh operating zones. • Steam and Condensate Systems – Shields tubes from vibration, pressure cycling, and moderate steam-induced corrosion. • Ash and Gas Flow Zones – Ideal for protecting tubes in areas of fly ash impact or high-speed combustion gas flow in WTE and biomass plants. Features • High Surface Hardness – Excellent resistance to surface wear, impact, and mechanical abrasion due to its high carbon and martensitic structure. • Moderate Corrosion Resistance – Withstands oxidizing and mildly corrosive conditions up to 650°C, suitable for moderate industrial atmospheres. • Structural Integrity – Maintains strength under pressure and temperature cycling, offering long service life in mechanical protection roles. • Easy Installation – The half-round design enables fast application in the field with minimal disruption to tube layout or operation. • Finishing Options – Available in bright annealed, pickled, or passivated surfaces depending on operational requirements. • Custom Built – Offered in varied lengths, diameters, thicknesses, and attachment styles (clamp-on or weld-on) to match specific installations. Applications • Thermal and Biomass Power Stations – Used to protect boiler tubes from ash erosion and gas turbulence in high-velocity flue paths. • Cement and Steel Industries – Shields kiln and heat recovery tubes from particulate impact, slag, and high-temperature dust environments. • Waste-to-Energy Plants – Guards tubes in combustion chambers and economizers where gas stream erosion and soot buildup are persistent issues. • Oil Refineries – Applied in heat exchangers and preheater tubes exposed to abrasive flow or moderate corrosion risk. • Pulp and Paper Mills – Used in black liquor recovery boilers and steam generators handling fibrous or corrosive waste products. • Air Preheaters – Ideal for tubes located in dust-laden environments requiring protection against wear and gas abrasion. Conclusion The SS 420 Half Round Tube Shield from Ladhani Metal Corporation offers a high-performance, wear-resistant solution for tube protection in mechanically aggressive and thermally intensive environments. Its martensitic structure provides outstanding surface hardness, making it especially effective in soot blower zones, high-velocity ducts, and areas subject to abrasive particle flow. While not intended for severe chemical environments, SS 420 delivers exceptional value where mechanical durability is the top priority. With full customization options and precision manufacturing, Ladhani Metal Corporation ensures durable, reliable shielding products tailored to your plant’s exact operational needs. For technical consultations, order customization, or to request a quotation, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are high-precision protective components designed to shield boiler and heat exchanger tubes from erosion, high-temperature scaling, and aggressive gas flows. Crafted from superior stainless steel alloys, these shields enhance equipment reliability and performance in demanding industrial conditions. SS 310 Half Round Tube Shield The SS 310 Half Round Tube Shield is a semi-circular metallic shield fabricated using premium stainless steel grade 310, known for its outstanding resistance to oxidation, scaling, and corrosion at elevated temperatures. This shield is specifically designed for use in environments involving extreme thermal cycling, aggressive combustion gases, and high mechanical stress. The half-round configuration ensures easy, secure installation over exposed tubes, forming a protective barrier that extends component life and reduces maintenance costs. Chemical Composition of SS 310 – Austenitic Stainless Steel • Carbon (C): ≤ 0.25% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.50% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Uses : • Boiler Tube Protection – Shields boiler tubes from direct exposure to high-temperature flue gases, reducing metal loss due to oxidation and abrasive ash erosion in thermal power plants. • Heat Exchanger Tube Shielding – Provides a protective layer against high-temperature corrosion and flow-induced wear, preserving efficiency and reducing failure risks. • Furnace Tube Safeguarding – Resists flame impingement and scale buildup in industrial furnaces, extending the life of radiant and convection section tubes. • Petrochemical Process Protection – Used in reactors and reformers where exposure to hot process gases and thermal cycling can severely damage unprotected tubes. • Steam Superheater and Reheater Systems – Guards tubes from surface deterioration in high-pressure steam circuits, improving operational longevity and safety. Features : • High-Temperature Resistance – SS 310 maintains structural integrity at temperatures up to 1100°C, ideal for high-heat zones in boilers and furnaces. • Corrosion and Oxidation Resistance – Superior chromium and nickel content ensures excellent resistance to oxidation, scaling, and carburization even under continuous thermal exposure. • Precision Half-Round Design – Ensures a tight, secure fit on existing tube surfaces, enabling quick installation and easy replacement without interrupting system performance. • Custom Fabrication – Available in various thicknesses, lengths, and diameters to suit different tube sizes and geometries, with optional welding or clamping attachments. • Surface Finishing Options – Offered in bright annealed, pickled, or passivated finishes for enhanced appearance and additional surface protection. Applications : • Thermal Power Plants – Protects superheater and economizer tubes from soot erosion, slagging, and thermal stress caused by high-velocity flue gases. • Oil Refineries and Petrochemical Plants – Installed on high-temperature piping and reformer tubes exposed to corrosive gases, thermal cycling, and process variability. • Heat Recovery Steam Generators (HRSGs) – Enhances tube durability in combined-cycle plants where steam tubes face aggressive exhaust gas flow. • Chemical Processing Equipment – Applied in heat exchanger and reactor tubes that handle chemically reactive or acidic compounds at elevated temperatures. • Industrial Steam Boilers – Used in high-pressure steam systems across food, textile, pulp & paper, and marine industries to extend tube life and ensure safe operation. Conclusion The SS 310 Half Round Tube Shield by Ladhani Metal Corporation is a premium solution engineered for the most demanding high-temperature and corrosive environments. Its exceptional resistance to oxidation, scaling, and thermal fatigue makes it ideal for use in power plants, refineries, and process industries where tube protection is critical for safety and efficiency. By extending the life of boiler and heat exchanger tubes, reducing downtime, and minimizing repair costs, these shields offer long-term value and dependable performance. With custom sizing, precision fabrication, and strict quality control, Ladhani Metal Corporation delivers reliable shielding solutions tailored to meet the toughest industrial challenges. For technical inquiries, customization options, or to request a quote, please contact Ladhani Metal Corporation.

DIN 2634 monel flanges PN 25 are high-performance weld neck flanges manufactured in accordance with the DIN 2634 standard. Specifically engineered for high-pressure applications up to 25 bar (362 psi), these flanges are made from premium Monel alloys, offering excellent corrosion resistance, high strength, and durability in harsh environments. Their robust construction makes them ideal for applications involving aggressive chemical media and seawater where conventional metal flanges may degrade. Ladhani Metal Corporation is a trusted global manufacturer and supplier of Monel flanges, known for advanced manufacturing capabilities, precision machining, and strict adherence to international quality standards. Each flange undergoes thorough inspection and testing to ensure long-term reliability, safety, and resistance to extreme operating conditions. Pressure Rating: • PN 25 (25 bar / 362 psi): Designed for high-pressure systems requiring corrosion-resistant and mechanically robust flange connections. Flange Type: • Weld Neck Flanges Featuring an extended tapered hub, weld neck flanges provide excellent stress distribution at the base, ensuring strong and leak-proof joints in systems exposed to high pressure and thermal cycling. • Flat Face (FF) Flanges Ideal for use with softer gasket materials or in systems connecting to cast components, flat face flanges offer consistent and uniform gasket compression. Monel Grades and Typical Composition: Monel 400 (UNS N04400) – Nickel-Copper Alloy • Nickel (Ni): 63% minimum • Copper (Cu): 28-34% • Iron (Fe): 2.5% maximum • Manganese (Mn): 2.0% maximum • Carbon (C): 0.30% maximum Applications: Preferred in seawater and saltwater service, chemical processing, and marine equipment where excellent corrosion resistance in oxidizing and reducing environments is required. Monel K500 (UNS N05500) – Nickel-Copper Alloy with Additional Strengthening Elements • Nickel (Ni): 63% minimum • Copper (Cu): 28-34% • Iron (Fe): 2.5% maximum • Manganese (Mn): 2.0% maximum • Aluminum (Al) and Titanium (Ti): Added for age hardening Applications: Used in high-strength marine and chemical environments requiring enhanced mechanical properties and corrosion resistance. Applications of DIN 2634 Monel Flanges PN 25: • Offshore and Marine Systems Resists corrosion from seawater, brine, and marine atmospheres while maintaining strength under pressure. • Chemical and Petrochemical Processing Ideal for transporting corrosive media such as acids, alkalis, and chloride solutions at elevated pressures. • Desalination Plants Performs reliably in saltwater treatment and high-pressure water processing systems. • Power Generation Used in systems requiring resistance to erosion and corrosion in high-temperature steam and cooling circuits. • Pharmaceutical and Food Processing Applied in hygienic environments requiring corrosion resistance and chemical inertness. Key Features: • Manufactured in accordance with DIN 2634 dimensional and pressure requirements • PN 25 pressure rating supports high-pressure applications • Excellent resistance to corrosion, erosion, and stress corrosion cracking • Weld neck configuration ensures strong, vibration-resistant joints • Available in Monel 400 and Monel K500 alloys • Custom sizes, pressure classes, and surface finishes available upon request Conclusion: DIN 2634 monel flanges PN 25 from Ladhani Metal Corporation are engineered for demanding conditions where corrosion resistance, mechanical strength, and pressure integrity are essential. These Monel flanges provide long-term durability and reliable performance for advanced applications in marine, chemical, power generation, and industrial systems. For technical consultations, specialized requirements, or pricing information, contact Ladhani Metal Corporation today.

The DIN 2558 Super Duplex Flange PN 6 is a high-performance piping component engineered for the most demanding industrial applications. Designed in accordance with DIN (Deutsches Institut für Normung) specifications, these flanges are manufactured from premium-grade super duplex stainless steel, offering outstanding mechanical strength and superior corrosion resistance, particularly in aggressive environments. Supplied by Ladhani Metal Corporation, these flanges are trusted by industries that require durability, safety, and long-lasting performance. Super duplex flanges are widely used in offshore oil and gas, petrochemical, chemical processing, desalination, and marine applications where resistance to stress corrosion cracking, pitting, and erosion is essential. The PN 6 pressure rating (6 bar or approximately 87 psi) makes them suitable for medium-pressure systems requiring robust and corrosion-resistant connections. Types: Weld Neck Flange – Offers a strong welded connection ideal for high-pressure and high-temperature systems. Slip-On Flange – Easy to install and weld, suitable for lower-stress applications. Blind Flange – Used to seal off the end of a pipeline, ensuring zero leakage. Threaded Flange – Provides a screw-type connection where welding isn’t preferred. Socket Weld Flange – Ideal for small-diameter, high-pressure applications requiring a smooth bore and secure weld. Grade & Chemical Composition: Super Duplex 2507 (UNS S32750): Chromium (Cr): 24.0 – 26.0% Nickel (Ni): 6.0 – 8.0% Molybdenum (Mo): 3.0 – 5.0% Nitrogen (N): 0.24 – 0.32% Manganese (Mn): ≤ 1.2% Silicon (Si): ≤ 0.8% Carbon (C): ≤ 0.03% Iron (Fe): Balance Key Properties: Exceptional resistance to chloride-induced stress corrosion cracking, pitting, and crevice corrosion High tensile and yield strength—almost double that of conventional austenitic stainless steels Outstanding performance in seawater and chemically aggressive environments PN 6 Rating: The PN 6 pressure rating corresponds to 6 bar (approximately 87 psi), making this flange ideal for medium-pressure pipelines where superior strength and corrosion resistance are required for safe and long-lasting operation. Features: Corrosion Resistance: Excellent resistance to both uniform and localized corrosion, even in chloride-rich environments such as seawater. High Mechanical Strength: Delivers outstanding load-bearing capacity, enabling the use of thinner wall sections for lighter system design. Long Service Life: Built for durability in extreme conditions, reducing maintenance and replacement costs over time. Stress Corrosion Resistance: Provides safety in high-stress, high-temperature, and aggressive chemical conditions. Industry Versatility: Widely used in offshore platforms, chemical plants, desalination units, marine vessels, and high-performance piping systems. Cost Efficiency: High strength and corrosion resistance allow for optimized system design with reduced material usage. Ladhani Metal Corporation ensures that each DIN 2558 Super Duplex Flange is manufactured using advanced technology and strict quality control processes. These flanges deliver the strength, reliability, and corrosion resistance required in the most challenging industrial applications—offering a dependable, long-term solution for critical infrastructure. #din2558 #din2558flanges #din2558superduplexflanges #flanges

The DIN 2558 Duplex Flange PN 6 is a high-quality, precision-engineered piping component designed to deliver exceptional mechanical strength and corrosion resistance in harsh industrial environments. Manufactured to DIN (Deutsches Institut für Normung) standards, these flanges are produced using premium duplex stainless steels, which combine the benefits of both austenitic and ferritic stainless steels. Ladhani Metal Corporation supplies these flanges with a strong focus on durability, reliability, and performance under challenging operating conditions. Duplex flanges are widely used in industries such as oil and gas, petrochemical, marine, desalination, pulp and paper, and chemical processing—where resistance to stress corrosion cracking, pitting, and crevice corrosion is essential. The PN 6 pressure rating (6 bar or approximately 87 psi) makes these flanges suitable for medium-pressure systems that demand both structural integrity and long service life. Types: Weld Neck Flange – Provides a robust, welded connection ideal for high-stress, high-temperature applications. Slip-On Flange – Offers ease of installation and is welded on both the inner and outer surfaces for a secure fit. Blind Flange – Used to close the end of a pipe system, ensuring leak-tight sealing. Threaded Flange – Allows for easy, non-welded connection to piping systems with threaded ends. Socket Weld Flange – Ideal for smaller-diameter high-pressure lines, offering smooth flow and strong connections. Grades & Chemical Composition: Duplex 2205 (UNS S31803/S32205): Chromium (Cr): 21.0 – 23.0% Nickel (Ni): 4.5 – 6.5% Molybdenum (Mo): 2.5 – 3.5% Manganese (Mn): ≤ 2.0% Silicon (Si): ≤ 1.0% Nitrogen (N): 0.14 – 0.20% Carbon (C): ≤ 0.03% Iron (Fe): Balance Key Features: Excellent resistance to pitting, crevice corrosion, and chloride-induced stress corrosion cracking. Superior strength compared to standard stainless steels PN 6 Rating: The PN 6 rating signifies a nominal pressure capacity of 6 bar (approximately 87 psi), making these flanges suitable for medium-pressure applications in both industrial and marine systems where enhanced corrosion resistance and mechanical strength are required. Features: Corrosion Resistance: Excellent resistance to a wide range of corrosive environments, especially chlorides and sulfides. High Strength: Duplex steel offers nearly twice the strength of conventional austenitic stainless steel, reducing wall thickness and weight. Stress Corrosion Resistance: Ideal for applications involving aggressive media and fluctuating temperatures. Longevity: Designed to offer extended service life with minimal maintenance in severe environments. Versatile Use: Applicable in offshore platforms, chemical plants, desalination systems, and high-performance piping networks . Cost-Efficient: Combines strength and corrosion resistance, often allowing for reduced material thickness and overall system weight. Ladhani Metal Corporation ensures that each DIN 2558 Duplex Flange is precision-machined and rigorously tested to meet or exceed international standards. These flanges offer a reliable, leak-proof solution for critical piping systems, balancing performance, safety, and long-term value.

Ladhani Metal Corporation offers a diverse range of titanium clamps, available in various sizes and types, to cater to different application requirements. Our titanium clamps are designed to provide secure and reliable fastening solutions for a wide range of industries and applications. Here are some of the clamp sizes and types we offer: Pipe Clamps: Our titanium pipe clamps are available in sizes ranging from small diameters to large diameters, accommodating different pipe sizes. These clamps ensure a tight and secure grip on pipes, providing stability and support in plumbing, HVAC systems, and industrial piping applications. Cable Clamps: We provide titanium cable clamps in different sizes to secure and organize cables or wires. These clamps are designed to prevent cable damage or strain, ensuring efficient cable management in industries such as electrical, telecommunications, and data centers. Hose Clamps: Our titanium hose clamps are offered in various sizes to fit different hose diameters. These clamps provide a secure and leak-proof connection between hoses and fittings in applications such as automotive, marine, and industrial fluid transfer systems. Tube Clamps: Designed for fastening and securing tubes, our titanium tube clamps are available in different sizes to accommodate various tube diameters. These clamps offer stability and support in applications such as scaffolding, handrails, and framework construction. Customized Clamps: In addition to standard clamp sizes, we also offer customized titanium clamps tailored to your specific requirements. Our skilled engineers work closely with you to understand your needs and provide bespoke solutions that meet your unique application demands. At Ladhani Metal Corporation, we ensure that our titanium clamps meet international quality standards, providing reliability, durability, and excellent corrosion resistance. Our range includes popular titanium grades such as Grade 2, Grade 5 (Ti-6Al-4V), and Grade 23 (Ti-6Al-4V ELI). These grades are widely recognized for their excellent corrosion resistance, high strength-to-weight ratio, and durability. Choose from our selection of titanium clamps in different grades to ensure optimal performance and reliability in your specific application. Our Domestic reach is unlimited and we supply to this following cities Agra, Ahmedabad, Allahabad, Amritsar, Aurangabad, Bangalore, Bhopal, Chandigarh, Chennai, Coimbatore, Dhanbad, Faridabad, Ghaziabad, Guwahati, Gwalior, Howrah, Hyderabad, Indore, Jabalpur, Jaipur, Jodhpur, Kalyan-Dombivali, Kanpur, Kolkata, Kota, Lucknow, Ludhiana, Madurai, Meerut, Mumbai, Nagpur, Nashik, Navi Mumbai, New Delhi, Patna, Pimpri-Chinchwad, Pune, Raipur, Rajkot, Ranchi, Solapur, Srinagar, Surat, Thane, Vadodara, Varanasi, Vasai-Virar, Vijayawada, Visakhapatnam, Hubballi-Dharwad, Tiruchirappalli, Bareilly, Moradabad, Mysore, Gurgaon, Aligarh, Jalandhar, Bhubaneswar We export to following Countries: Russia, Canada, United States, China, Brazil, Australia, Argentina, Kazakhstan, Algeria, Democratic Republic of the Congo, Denmark, Saudi Arabia, Mexico, Indonesia, Sudan, Libya, Iran, Mongolia, Peru, Chad, Niger, Angola, Mali, South Africa, Colombia, Ethiopia, Bolivia, Mauritania, Egypt, Tanzania, Nigeria, Venezuela, Namibia, Mozambique, Pakistan, Turkey, Chile, Zambia, Myanmar, Afghanistan, South Sudan, France, Somalia, Central African Republic, Ukraine, Madagascar, Botswana, Kenya, Yemen, Thailand, Spain, Turkmenistan, Cameroon, Papua New Guinea, Sweden, Uzbekistan, Morocco, Iraq, Paraguay, Zimbabwe, Norway, Japan, Germany, Republic of the Congo, Finland, Vietnam, Malaysia, Cote d'Ivoire, Poland, Oman, Italy, Philippines, Ecuador, Burkina Faso, New Zealand, Gabon, United Kingdom, Guinea, Uganda, Nepal, Bangladesh