Half Round Tube Shield Ladhani Metal Corporation manufactures Cr25Ni20 Half Round Straight Tube Shields for use in high-temperature industrial environments where resistance to oxidation, carburization, and thermal fatigue is critical. Cr25Ni20 is a heat-resistant alloy with a high chromium (25%) and nickel (20%) content, offering excellent stability under prolonged exposure to high heat and corrosive flue gases. This alloy is widely used in boilers, reformers, waste heat recovery systems, and thermal process units. Cr25Ni20 Half Round Straight Tube Shield The Cr25Ni20 Half Round Straight Tube Shield is precisely shaped to fit the outer surface of straight heat exchanger or boiler tubes. It forms a durable, semi-cylindrical layer of protection against high-temperature scaling, tube thinning, and erosion caused by particulate-laden flue gas. The shield enhances tube longevity in radiation zones and areas prone to direct flame or high-velocity gas flow. Its excellent thermal shock resistance also makes it suitable for cyclic heating and cooling conditions. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of Cr25Ni20 Half Round Straight Tube Shields, delivering robust thermal shielding solutions for critical tube protection. Material Grade Cr25Ni20 – High chromium-nickel heat-resistant alloy Chemical Composition of Cr25Ni20 • Carbon (C): ≤ 0.08% • Silicon (Si): ≤ 1.5% • Manganese (Mn): ≤ 2.0% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Uses • Protection of boiler tubes in radiant and convection zones • Straight tube shielding in reformers and furnace outlets • High-temperature air and gas heater shielding • Application in coal gasification and petrochemical furnaces • Tube erosion prevention in thermal incineration units Features • Excellent high-temperature performance – Operates reliably above 1000°C • Resistant to oxidation and scale – Maintains surface integrity in oxidizing environments • Superior creep strength – Suitable for long-term service under thermal stress • Effective in carburizing atmospheres – Ideal for furnaces and gas reactors • Thermal fatigue resistance – Withstands repeated heating and cooling cycles • Custom fabrication – Available in multiple lengths, thicknesses, and diameters Applications • power generation boilers – Radiant zone tube protection • thermal cracking units – Resistant to flame impingement and high gas velocity • waste heat recovery boilers – Prolongs tube life in high-ash flue gas areas • fertilizer plants – Used in ammonia reformer tube protection • metallurgical furnaces – Shields exposed tubes in extreme temperature cycles Conclusion Cr25Ni20 Half Round Straight Tube Shields from Ladhani Metal Corporation offer outstanding durability and heat resistance, making them ideal for straight tubes operating in the most demanding high-temperature applications. Their high chromium and nickel content ensures reliable service where oxidation, erosion, and thermal cycling are a concern. For custom sizes, specifications, or technical consultations, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #halftubeshield #utypehalftubeshield

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are specially designed components used to protect boiler and heat exchanger tubes from erosion, wear, and high-temperature damage. Manufactured with precision and expertise, these shields enhance tube life, reduce maintenance requirements, and support efficient operation in high-performance industrial systems. The half-round design enables quick installation and provides effective coverage for vulnerable tube surfaces. SS 304 U Type Half Round Tube Shield The SS 304 U Type Half Round Tube Shield is a specially fabricated, semi-circular tube protection device designed to fit around both the curved (U-bend) and straight sections of heat exchanger and boiler tubes. Constructed from premium-grade stainless steel 304, it offers exceptional resistance to corrosion, oxidation, and mechanical wear. Its U-shaped configuration ensures continuous protection along the bend radius, where erosion, thermal stress, and ash impingement are most intense. This shield is available in both inner and outer configurations to ensure full tube coverage. • Outer U Type Half Round Tube Shield – Shields the external curve of U-bend tubes from flame impingement, heat radiation, and gas flow abrasion. • Inner U Type Half Round Tube Shield – Protects the internal arc of the U-bend from turbulence, corrosion, and localized thermal impact. Ladhani Metal Corporation is a leading manufacturer and exporter of SS 304 U Type Half Round Tube Shields, offering high-quality and custom-engineered solutions to meet the demanding requirements of global industries. Chemical Composition of SS 304 – Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 10.5% • Iron (Fe): Balance Applications: Ideal for use in thermal power systems, steam generation units, and petrochemical processing where tube bends are subject to extreme heat, corrosion, or flow-related erosion. Uses • Protection of U-bend sections in superheaters, reheaters, and economizers • Shielding of return bends in heat exchangers exposed to flue gas or high-velocity media • Enhancement of tube durability in HRSG systems and boilers • Erosion prevention in waste heat recovery boilers and furnace zones • Corrosion mitigation in chemical process plant U-tube bundles Features • Material: Manufactured from high-grade SS 304 for superior heat and corrosion resistance • Configuration: Inner and outer U-type shields available for full bend coverage • Design: Formed precisely to match U-bend tube radius for secure, vibration-free fitment • Finish: Bright annealed, pickled, or passivated finishes available (custom finishes on request) • Durability: High mechanical strength and long service life under thermal cycling • Customization: Available in various lengths, thicknesses, and diameters as per project requirements • Easy Installation: Designed for clamping, welding, or banding with minimal tube interference Applications • Thermal power stations and utility boilers • Waste-to-energy systems and HRSGs • Petrochemical refineries and furnace systems • Chemical processing and ammonia plants • Steam-based heat recovery units • Pulp and paper mills with superheater tube networks Conclusion The SS 304 U Type Half Round Tube Shield by Ladhani Metal Corporation offers a reliable and efficient solution for protecting U-bend tube sections in demanding high-temperature and corrosive environments. As a trusted manufacturer and exporter, Ladhani Metal Corporation delivers products that combine durability, precision, and performance. Designed for longevity and ease of installation, these shields help extend tube life and reduce unplanned maintenance. Custom-built to your specifications, our tube shields are a dependable solution for critical tube protection. For technical specifications, customized sizes, or quotation requests, please contact Ladhani Metal Corporation.

DIN 2627 Monel flanges PN 400 are high-performance blind flanges crafted for ultra-high-pressure systems where superior corrosion resistance, durability, and structural integrity are critical. Compliant with the DIN 2627 standard, these flanges are specifically designed to close off the ends of pipelines in extreme service environments, including highly corrosive marine atmospheres, acidic and alkaline chemical processes, and high-temperature applications. With a PN 400 rating (400 bar / 5800 psi), these flanges ensure leak-free operation under intense pressure and challenging conditions. Made from Monel alloys—primarily Monel 400 and Monel K500—these flanges are widely utilized in offshore oil rigs, naval applications, chemical processing, and power generation systems. Ladhani Metal Corporation is a global leader in manufacturing and exporting DIN-standard Monel flanges, ensuring compliance with international requirements for pressure containment, corrosion resistance, and metallurgical consistency. Pressure Rating: • PN 400 (400 bar / 5800 psi): Engineered for extremely high-pressure piping systems in critical and hazardous service environments where reliable sealing is essential. Flange Type: • Blind Flanges Solid, non-bored flanges used to seal piping systems or terminate flow paths. Ideal for pressure testing, system isolation, and future expansion. • Flat Face (FF) Flanges Designed with a flat sealing surface for use with full-face gaskets and flat mating components. Ensures uniform load distribution and optimal sealing performance. Monel Grades and Composition: Monel 400 (UNS N04400) • Nickel (Ni): ≥ 63% • Copper (Cu): 28 – 34% • Iron (Fe): ≤ 2.5% • Manganese (Mn): ≤ 2% • Silicon (Si): ≤ 0.5% • Carbon (C): ≤ 0.3% Applications: Outstanding resistance to seawater, hydrofluoric acid, alkalis, and other corrosive media. Widely used in marine equipment, chemical processing, and heat exchangers. Monel K500 (UNS N05500) • Nickel (Ni): ≥ 63% • Copper (Cu): 27 – 33% • Aluminum (Al): 2.3 – 3.15% • Titanium (Ti): 0.35 – 0.85% • Iron (Fe): ≤ 2% • Carbon (C): ≤ 0.25% Applications: Combines the corrosion resistance of Monel 400 with enhanced strength and hardness. Suitable for high-stress components like shafts, valve parts, and pump systems in corrosive environments. Applications of DIN 2627 Monel Flanges PN 400: • Offshore Oil and Gas Platforms Ideal for subsea systems exposed to high salinity, pressure, and corrosive gases such as hydrogen sulfide. • Marine and Shipbuilding Preferred in piping systems, ballast lines, and propulsion equipment exposed to seawater and biofouling agents. • Chemical and Petrochemical Plants Used in process systems handling caustic solutions, hydrofluoric acid, and strong alkalis at elevated pressures. • Heat Exchangers and Condensers Excellent thermal conductivity and corrosion resistance make Monel suitable for harsh thermal cycling conditions. • Nuclear and Power Generation Resilient in high-radiation and chemical-laden environments found in cooling systems and high-pressure steam lines. • Aerospace and Defense Used in fuel and hydraulic lines where strength and resistance to high-pressure corrosive media are critical. Key Features: • Manufactured according to DIN 2627 standards • Rated for PN 400 high-pressure operations • Blind flange design ensures reliable sealing and flow isolation • Flat face configuration for full-face gasket compatibility • Available in Monel 400 and Monel K500 grades • Exceptional resistance to corrosion by seawater, acids, and alkalis • High strength and durability in extreme service environments • Widely used in marine, chemical, nuclear, oil and gas, and aerospace industries • Custom configurations, sizes, and material options available on request Conclusion: DIN 2627 Monel Flanges PN 400 from Ladhani Metal Corporation are engineered for mission-critical applications where long-term durability, corrosion resistance, and high-pressure performance are mandatory. Whether you need protection against seawater, alkalis, or aggressive process chemicals, these flanges provide robust, leak-free service in the harshest operating environments. Contact Ladhani Metal Corporation for expert guidance, custom engineering, and dependable supply of Monel flange solutions tailored to your specific needs

DIN 2627 Inconel flanges PN 400 are premium-grade blind flanges engineered for ultra-high-pressure applications requiring exceptional corrosion resistance, heat resistance, and mechanical strength. Manufactured in accordance with the DIN 2627 standard, these flanges are designed to seal off the ends of piping systems, especially in extreme environments involving high temperatures, aggressive chemicals, or seawater exposure. The PN 400 rating (400 bar / 5800 psi) ensures performance under intense pressure conditions. Produced using high-performance nickel-based alloys such as Inconel 600, Inconel 625, and Inconel 718, these flanges are used extensively in aerospace, chemical processing, offshore oil and gas, marine, and power generation industries. Ladhani Metal Corporation is a leading global manufacturer and exporter of Inconel flanges, supplying components that conform to international standards for material integrity, pressure containment, and corrosion resistance. Pressure Rating: • PN 400 (400 bar / 5800 psi): Suitable for high-pressure piping systems in critical applications where maximum sealing and durability are essential. Flange Type: • Blind Flanges Solid, non-bored flanges used to isolate piping systems or terminate flow. Ideal for pressure testing, maintenance, and future pipeline expansions. • Flat Face (FF) Flanges Designed with a flat sealing surface for use with full-face gaskets and flat mating components, ensuring even load distribution and effective sealing. Inconel Grades and Composition: Inconel 600 (UNS N06600) • Nickel (Ni): ≥ 72% • Chromium (Cr): 14 – 17% • Iron (Fe): 6 – 10% • Manganese (Mn): ≤ 1% • Silicon (Si): ≤ 0.5% • Carbon (C): ≤ 0.15% • Sulfur (S): ≤ 0.015% Applications: Excellent resistance to oxidation, carburization, and chloride-ion stress corrosion cracking. Used in furnace components, heat exchangers, and food processing equipment. Inconel 625 (UNS N06625) • Nickel (Ni): ≥ 58% • Chromium (Cr): 20 – 23% • Molybdenum (Mo): 8 – 10% • Niobium + Tantalum (Nb + Ta): 3.15 – 4.15% • Iron (Fe): ≤ 5% • Carbon (C): ≤ 0.10% • Manganese (Mn): ≤ 0.5% • Silicon (Si): ≤ 0.5% Applications: Outstanding corrosion and fatigue resistance in seawater and chemical environments. Common in marine, aerospace, and offshore industries. Inconel 718 (UNS N07718) • Nickel (Ni): 50 – 55% • Chromium (Cr): 17 – 21% • Iron (Fe): Balance • Niobium + Tantalum (Nb + Ta): 4.75 – 5.5% • Molybdenum (Mo): 2.8 – 3.3% • Titanium (Ti): 0.65 – 1.15% • Aluminum (Al): 0.2 – 0.8% Applications: High strength and oxidation resistance up to 700°C. Used in jet engines, gas turbines, and high-pressure valves. Applications of DIN 2627 Inconel Flanges PN 400: • Offshore Oil and Gas Platforms Withstands high-pressure, high-salinity, and corrosive environments in subsea pipelines and risers. • Chemical Processing Plants Ideal for systems handling oxidizers, acids, solvents, and reactive compounds at high temperatures and pressures. • Aerospace and Jet Propulsion Used in fuel systems, hydraulic lines, and turbine enclosures where extreme heat and stress are common. • Nuclear and Power Generation Suited for high-pressure reactor lines and heat exchanger systems exposed to radiation, heat, and corrosive media. • Desalination and Seawater Systems Highly resistant to chloride-induced pitting and crevice corrosion. • High-Temperature and Reactive Media Systems Perfect for isolating systems exposed to thermal cycling and chemical attack. Key Features: • Manufactured to DIN 2627 standards • Rated for PN 400 ultra-high-pressure systems • Blind flange design for sealing pipe ends or testing access • Flat face design for even gasket compression and sealing • Available in Inconel 600, 625, and 718 • Excellent resistance to oxidation, acids, chlorides, and high heat • High mechanical strength and fatigue resistance • Used in critical industries including aerospace, marine, oil and gas, and chemical processing • Custom sizes, alloys, pressure ratings, and surface finishes available on request Conclusion: DIN 2627 Inconel Flanges PN 400 from Ladhani Metal Corporation offer exceptional performance and reliability in the most demanding service conditions. Whether your system involves corrosive chemicals, high-pressure steam, or marine exposure, these blind flanges deliver secure sealing, longevity, and safety. Contact Ladhani Metal Corporation for material selection, technical support, or custom solutions tailored to your high-performance application.

Ladhani Metal Corporation is a leading manufacturer and exporter of DIN 2565 Inconel flanges, engineered for high-performance, corrosion-resistant, and heat-resistant piping connections in low-pressure systems. These flanges are manufactured in accordance with DIN 2565 standards and are typically available with a PN 6 pressure rating, making them ideal for threaded piping connections where welding is not required. Inconel flanges are made from a family of nickel-chromium-based superalloys known for their excellent resistance to oxidation, high temperatures, and corrosive environments. They are especially suitable for critical applications in extreme operating conditions, including chemical processing, marine, aerospace, and high-temperature industrial systems. Flange Types: • Threaded (Screwed) Flanges: Allow for quick and easy installation without welding, suitable for systems requiring periodic disassembly. • Raised Face (RF) Flanges: Provides enhanced gasket compression, ensuring a tight and reliable seal in corrosive and high-temperature applications. • Flat Face (FF) Flanges: Commonly used in low-pressure piping systems, especially when paired with non-metallic gaskets. • Forged Threaded Flanges: Forging enhances mechanical strength and resistance to fatigue and stress. • Custom-Machined Flanges: Precision-machined to meet specific dimensional, material, and pressure requirements for specialized uses. Available Inconel Grades and Chemical Composition: 1. Inconel 600 (UNS N06600) o Nickel (Ni): ≥ 72.0% o Chromium (Cr): 14.0 – 17.0% o Iron (Fe): 6.0 – 10.0% Applications: Resistant to high temperatures and oxidizing environments; ideal for furnace components, chemical processing, and heat exchangers. 2. Inconel 625 (UNS N06625) o Nickel (Ni): ≥ 58.0% o Chromium (Cr): 20.0 – 23.0% o Molybdenum (Mo): 8.0 – 10.0% o Niobium (Nb): 3.15 – 4.15% Applications: Offers outstanding fatigue strength and chloride corrosion resistance; used in marine systems, nuclear reactors, and aerospace components. Applications of DIN 2565 Inconel Flanges: • Chemical Processing: Excellent resistance to a wide range of corrosive chemicals and high-temperature oxidation. • Marine and Offshore: Withstands saltwater corrosion and extreme marine conditions. • Power and Heat Generation: Suitable for high-temperature boiler systems and superheaters. • Aerospace Industry: Ideal for jet engines, turbine components, and exhaust systems. • Nuclear and Defense: Used in systems exposed to radiation, high pressure, and corrosive environments. Key Features: • Manufactured in compliance with DIN 2565 specifications and PN 6 pressure rating • Excellent resistance to oxidation, carburization, and chloride stress corrosion • High mechanical strength at elevated temperatures • Non-magnetic and corrosion-resistant in both oxidizing and reducing environments • Supplied with complete material traceability, test certificates, and quality assurance documents Conclusion: DIN 2565 Inconel flanges from Ladhani Metal Corporation are engineered to meet the highest standards of performance, durability, and corrosion resistance. Ideal for demanding industries where reliability under extreme conditions is essential, these flanges deliver long-term performance and safety. Backed by stringent quality control and precision manufacturing, our Inconel flanges are a trusted choice for critical applications worldwide. For technical details, pricing information, or to place a bulk order, contact Ladhani Metal Corporation today.

DIN 2545 Inconel flanges are engineered for superior strength, excellent resistance to high temperatures, and remarkable corrosion resistance in extreme environments. Ladhani Metal Corporation provides these high-quality flanges made from Inconel alloys, known for their ability to endure elevated temperatures, oxidation, and corrosive conditions. These flanges are ideal for industries where performance under high-temperature stress and resistance to harsh environments are essential, such as aerospace, chemical processing, power generation, and marine. Types of DIN 2545 Inconel Flanges: Flat Face Flanges (FF) – These flanges have a flat surface that facilitates uniform distribution of the sealing force, making them ideal for low-pressure systems or when a secure seal is required. Raised Face Flanges (RF) – Raised face flanges feature a raised area around the bolt holes, providing enhanced sealing pressure, making them suitable for high-pressure environments. Ring-Type Joint (RTJ) Flanges – Designed with a groove for a metal sealing ring, these flanges are ideal for applications requiring resistance to high pressure and high temperatures. Grades and Chemical Composition: Inconel 600 (UNS N06600) Chemical Composition: Ni: 72%, Cr: 14-17%, Fe: balance, Mn: 1%, Si: 0.5%, C: 0.15% Inconel 600 is known for its excellent resistance to oxidation and corrosion at elevated temperatures. It is widely used in applications like furnace components, chemical processing, and nuclear reactors, offering high strength and good workability. Inconel 625 (UNS N06625) Chemical Composition: Ni: 58%, Cr: 20-23%, Mo: 8-10%, Fe: 5%, Nb: 3.15-4.15%, Ti: 0.4-1% Inconel 625 is a nickel-based alloy that offers superior resistance to high-temperature oxidation and corrosion. It provides exceptional resistance to pitting and crevice corrosion, making it ideal for applications in aerospace, marine, and chemical industries, where high temperatures and corrosive environments are common. Inconel 718 (UNS N07718) Chemical Composition: Ni: 50-55%, Cr: 17-21%, Fe: 0-5%, Mo: 2.8-3.3%, Nb+Ta: 4.75-5.5%, Ti: 0.65-1.15%, Al: 0.2-0.8% Inconel 718 is a high-strength, corrosion-resistant alloy widely used in high-temperature applications. It is designed for use in extreme conditions, offering excellent resistance to oxidation, sulfidation, and high-temperature environments. PN 40 Pressure Rating: The "PN" rating indicates the flange's pressure capacity. PN 40 refers to flanges that are designed to withstand pressures up to 40 bar, making them suitable for high-pressure systems where secure, leak-free connections are essential. Applications: Aerospace Industry: Jet Engines and Turbomachinery: Inconel flanges are commonly used in aerospace applications, including jet engines and turbine systems, where components are exposed to extremely high temperatures and pressures. They provide excellent resistance to heat and corrosion in high-stress environments. Exhaust Systems: Inconel's ability to withstand high temperatures makes it ideal for use in exhaust systems of aircraft engines. 2. Power Generation Industry: Gas Turbines: Inconel flanges are used in gas turbines in power plants, particularly in components that operate at high temperatures, such as turbine blades, combustors, and other critical parts. Nuclear Power Plants: Inconel is used in the construction of components for nuclear reactors, where heat and radiation resistance are crucial. It is used in piping, valves, and other systems exposed to high-temperature nuclear environments. 3. Chemical Processing and Petrochemical Industries: High-Temperature Reactors: Inconel flanges are used in reactors, heat exchangers, and other equipment in the chemical industry that handle aggressive, high-temperature chemical reactions, including those with sulfuric acid, chlorine, and other corrosive substances. Petrochemical Refineries: Inconel is used in systems where high temperatures and reactive chemicals are present, offering superior performance in handling corrosive materials such as acids and hydrocarbons. 4. Oil and Gas Industry: Offshore Platforms: Inconel flanges are widely used in offshore oil and gas platforms, particularly in subsea pipelines, risers, and pressure vessels, where high resistance to both high pressure and corrosion (especially from seawater) is necessary. Wellhead Equipment: Inconel flanges are also used in downhole equipment and wellhead connections that need to resist high-pressure environments and exposure to extreme temperatures. Ladhani Metal Corporation ensures that each Inconel flange is produced to the highest standards of quality and precision, adhering to international specifications. Every flange undergoes thorough testing to meet the required durability and performance standards, providing reliable solutions for critical applications in the most challenging environments. #din2545 #din2545flanges #din2545inconelflanges #flanges #flangessupplier

Ladhani Metal Corporation is a manufacturer and stockist of a wide range of titanium valves, including: Titanium Full Bore and Flanged Valves, Titanium Needle Valves, Titanium Check Valves, Titanium Globe Valves, Titanium Gate Valves, Titanium Y Strainers, and other titanium forged fittings. Titanium valves are available in a variety of material grades, ranging from the most commonly used Grade 2 to alloyed titanium grades such as Gr. 5, Gr. 7, and Gr. 12. Titanium alloys are also known as R50400, R50550, and R56400 in UNS. Titanium valves are designed as per ANSI B16.34. Titanium valves are primarily made from ASTM B381 Grade F2 and F5. We manufacture our ball valves entirely from titanium, including: Titanium Ball Titanium Body Titanium Handle Titanium Fasteners Titanium Flange Ladhani Metal Corporation is a manufacturer, exporter, and supplier of titanium ball valves. Our Titanium Ball Valve Products: 1000 - 6000 PSI Two-Piece Full Bore Ball Valve 1000 - 6000 PSI Three-Piece Full Bore Ball Valve ANSI Class 150 – 900 Two-Piece Flanged Ball Valve ANSI Class 150 – 900 Two-Piece Flanged Ball Valve Design Features: Full Bar Machined Construction Valve Design as per ANSI B16.34 2-Piece Body Design, Full Bore Blow-Out-Proof Stem Design Flange Face to Face: ANSI B16.10 Class 150/300 RF Flange Dimension: ANSI B16.5 Class 150/300 End Type: Screwed & Welded End NACE MR0175 is available Ladhani Metal Corporation can also manufacture titanium ball valves in grades such as Titanium Grade 1, Titanium Grade 2, Titanium Grade 5, Titanium Grade 9, Titanium Grade 6, and Titanium Grade 23. Available at the following locations: Coimbatore, Rudrapur, Bhilai, Raigarh, Navi Mumbai, Aluva, Vijayawada, Firozabad, Panna, Panipat, Channapatna, Varanasi, Moradabad, Bareilly, Jamshedpur, Tiruppur, Rajahmundry, Bokaro Steel City, Kolkata, Durgapur, Kharagpur, Hosdurg, Haldia, Indore, Pithampur, Belagavi, Dibrugarh, Palakkad, Delhi, Noida, Kannur, Salem, Sivakasi, Kanpur, Rajkot, Kochi, Peenya, Surat, Rourkela, Visakhapatnam, Angul, Ahmedabad, Gandhinagar, Jamnagar, Vadodara, Bharuch-Ankleshwar, Ludhiana, Pimpri-Chinchwad, Mumbai, Bangalore, Thiruvananthapuram, Thrissur, Gajraula, Unnao, Sri City, Margao, Kunnamkulam, Darjeeling, Nashik, Chennai, Hosur, Haridwar, Faridabad, Mathura, Gurugram, Baddi, Calicut, Pune, Aurangabad, Nagpur, Mirzapur, Perambra, Muzaffarnagar, Meerut, Saharanpur, Bulandshahr, Ichalkaranji, Muvattupuzha, Aligarh, Anjar, Bardoli, Chittaranjan, Hyderabad, Jharia, Morbi, Nepanagar, Kollam, Tiruvalla, Kottayam, Idukki, Alappuzha, Cherthala, Alwaye, Ambattur, Ambarnath, Amritsar, Avadi, Ankleshwar, Bhadravati, Cochin, Dindigul, Ennore, Guntur, Kagithapuram, Kalpakkam, Kollegal, Kolar, Lucknow, Mysore, Nandambakkam, Nangal, Neyveli, Ooty, Perambur, Pinjore, Rupnarayanpur, Renukoot, Sindri, Singhbhum, Sirpur, Udhana, Urkunta, Worli, Zaina Kot. We are an exporter to the following countries: Russia, Canada, United States, China, Brazil, Australia, Argentina, Kazakhstan, Algeria, Democratic Republic of the Congo, Denmark, Saudi Arabia, Mexico, Indonesia, Sudan, Libya, Iran, Mongolia, Peru, Chad, Niger, Angola, Mali, South Africa, Colombia, Ethiopia, Bolivia, Mauritania, Egypt, Tanzania, Nigeria, Venezuela, Namibia, Mozambique, Pakistan, Turkey, Chile, Zambia, Myanmar, Afghanistan, South Sudan, France, Somalia, Central African Republic, Ukraine, Madagascar, Botswana, Kenya, Yemen, Thailand, Spain, Turkmenistan, Cameroon, Papua New Guinea, Sweden, Uzbekistan, Morocco, Iraq, Paraguay, Zimbabwe, Norway, Japan, Germany, Republic of the Congo, Finland, Vietnam, Malaysia, Côte d'Ivoire, Poland, Oman, Italy, Philippines, Ecuador, Burkina Faso, New Zealand, Gabon, United Kingdom, Guinea, Uganda, Ghana, Romania, Laos, Guyana, Belarus, Kyrgyzstan, Senegal, Syria, Cambodia, Uruguay, and Suriname.

A Molybdenum Disc is a flat, circular-shaped piece of molybdenum metal, commonly used in various high-performance applications that require excellent thermal conductivity, high-temperature resistance, and mechanical strength. Molybdenum, a transition metal, is known for its outstanding properties, which make it suitable for demanding environments in industries such as aerospace, electronics, and metallurgy. Key Features of Molybdenum Discs: o High Melting Point: Molybdenum has a very high melting point of approximately 2,623°C (4,753°F), allowing it to perform under extreme temperatures without losing its structural integrity. This makes it ideal for high-temperature applications like aerospace and industrial furnaces. o Excellent Strength and Durability: Molybdenum discs possess superior mechanical strength, maintaining their rigidity and resilience under stress. They can withstand heavy loads and maintain their shape even in harsh working conditions. o Corrosion and Oxidation Resistance: Molybdenum discs are highly resistant to oxidation and corrosion, especially at elevated temperatures. This property makes them suitable for use in chemical processing, reactors, and other environments prone to corrosive elements. o Thermal and Electrical Conductivity: Molybdenum exhibits good thermal and electrical conductivity, which is particularly useful in applications requiring efficient heat transfer and electrical performance, such as in electronics or semiconductor manufacturing. o Workability: Molybdenum is a tough, but ductile metal at high temperatures, allowing molybdenum discs to be fabricated with high precision into specific dimensions, surface finishes, and designs tailored to particular industrial needs. o Versatility: Molybdenum discs can be customized to different diameters, thicknesses, and surface finishes, making them adaptable for a wide range of applications. Common Applications: o Aerospace Industry: Molybdenum discs are used in components such as heat shields, rocket nozzles, and turbine blades due to their ability to endure high temperatures and mechanical stress. o Electronics and Electrical Applications: Molybdenum discs are employed in the manufacture of electrical contacts, filaments, and electrodes. Their good electrical conductivity and resistance to high temperatures make them valuable for vacuum tubes, semiconductors, and other electronic devices. o Chemical Processing: Molybdenum discs are used in the construction of equipment for the chemical and petrochemical industries, including reactors, heat exchangers, and other high-temperature processing units due to their corrosion and oxidation resistance.

A Molybdenum Bar is a solid, rectangular or cylindrical piece of molybdenum metal, often used in industrial applications that require high strength, heat resistance, and durability. Molybdenum is a transition metal known for its excellent properties, including a high melting point, resistance to corrosion, and mechanical strength, which make it ideal for use in demanding environments. Key Features of Molybdenum Bar: o High Melting Point: Molybdenum bars can withstand extremely high temperatures (up to around 2,623°C or 4,753°F) without losing their structural integrity, making them perfect for high-temperature applications such as aerospace and industrial furnaces. o Strength and Durability: Molybdenum bars exhibit superior tensile strength and resistance to deformation, ensuring long-lasting performance under mechanical stress. o Corrosion Resistance: Molybdenum bars are highly resistant to oxidation and corrosion, even at high temperatures, which is crucial for use in harsh environments like chemical processing and high-temperature furnaces. o Electrical and Thermal Conductivity: Molybdenum has good electrical and thermal conductivity, making it suitable for specialized applications in electronics, including filaments, electrodes, and thermocouples. o Ductility and Workability: Although molybdenum is a hard and brittle metal at room temperature, it can be processed into various shapes and sizes, including bars, rods, and wires, through specialized manufacturing techniques. Common Applications: o Aerospace: Molybdenum bars are used in turbine blades, rocket nozzles, and heat shields for spacecraft due to their ability to perform under extreme heat. o Electronics and Electrical: Molybdenum bars are used in filaments, cathodes, and electrodes in electronic devices due to their excellent electrical conductivity and high melting point. o Metallurgy and Manufacturing: Molybdenum is a key component in high-strength steel alloys, making it useful in manufacturing tools, cutting equipment, and industrial machinery. o Chemical Processing: Due to its resistance to corrosive environments, molybdenum bars are used in the construction of reactors, heat exchangers, and other chemical processing equipment. Ladhani Metal Corporation's molybdenum bars are manufactured with strict quality controls and adhere to international standards to ensure optimal performance in demanding application