Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are high-strength protective components used to shield boiler tubes, superheaters, and heat exchanger coils from ash impact, flue gas erosion, scaling, and corrosion. These shields are commonly used in thermal power plants, steam generating systems, and industrial boilers to protect tube surfaces and reduce wear in critical heat transfer zones. Their half-round profile is designed for easy installation and secure fitment over curved or straight tubes exposed to mechanical or thermal stress. SS 420 Half Round Tube Shield for LTSH Tube The SS 420 Half Round Tube Shield is manufactured from martensitic stainless steel grade 420, which is known for its high hardness, good oxidation resistance, and moderate corrosion protection. This material provides excellent wear resistance in abrasive and dry flue gas environments. It is particularly suitable for Low Temperature Superheater (LTSH) applications, where tubes are exposed to fly ash erosion, gas turbulence, and mechanical abrasion at relatively lower temperatures. SS 420 is often used where durability and strength are more critical than corrosion resistance alone. The Low Temperature Superheater (LTSH) is a section in a boiler where saturated steam from the steam drum is superheated to a moderately higher temperature before entering the high-temperature superheater stages. Positioned in areas with relatively lower flue gas temperatures, the LTSH helps improve thermal efficiency and reduces moisture content in steam. Due to constant exposure to abrasive flue gases and ash, LTSH tubes are prone to wear and require protective shielding, such as half round tube shields, to extend service life. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of SS 420 Half Round Tube Shields for LTSH applications, offering reliable protection where mechanical wear and gas erosion are of primary concern. Chemical Composition of SS 420 – Martensitic Stainless Steel • Carbon (C): 0.15 – 0.40% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 12.0 – 14.0% • Iron (Fe): Balance Applications: Best suited for dry ash, solid particulate flow, and mildly oxidizing environments in low-temperature superheater sections of boilers and industrial furnaces. Uses • Installed on LTSH tubes to protect from fly ash abrasion and soot erosion in power boilers • Shields return bends and tube banks in HRSGs and WHRBs exposed to turbulent flue gases • Used in biomass and coal-fired boilers to prevent mechanical wear and scaling on heat transfer tubes • Suitable for zones with high solid particle velocity and moderate corrosion risk • Effective in industrial and utility boilers that operate with abrasive fuels or in dry environments Features • High surface hardness – Excellent resistance to erosion, impact, and abrasion • Moderate oxidation resistance – Performs well in clean, oxidizing gas atmospheres • Precision fitment – Custom-shaped to match tube radius and curvature for secure shielding • Simple installation – Compatible with welding, clamping, or banding methods • Cost-efficient durability – Provides long service life in mechanical wear zones • Offered in varied lengths, thicknesses, and tube diameters based on application needs Applications • thermal power plants – Installed on LTSH tubes to minimize erosion and extend operational life • waste heat recovery units – Protects lower temperature coils from particulate-laden gas streams • coal-fired boilers – Shields convection sections exposed to ash and fly particles • steam generation systems – Guards heat transfer surfaces in dry, abrasive environments • biomass plants – Prevents wear from ash and unburned particulates in combustion zones Conclusion The SS 420 Half Round Tube Shield for LTSH Tube by Ladhani Metal Corporation – manufacturer, supplier, and exporter – offers strong mechanical protection and erosion resistance for superheater and boiler tubes operating in low-temperature, abrasive environments. Designed for durability and precision fit, it enhances tube longevity and system performance in thermal applications where particulate damage is a concern. For product specifications, custom sizes, or technical assistance, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered components used to protect boiler and heat exchanger tubes from erosion, scaling, and high-temperature corrosion. These shields are widely applied in industrial systems exposed to thermal cycling, aggressive gases, and particulate flow. Their half-round shape allows for simple and secure installation over straight or curved tube surfaces, extending tube life and reducing maintenance needs. SS 410 U Type Half Round Tube Shield The SS 410 U Type Half Round Tube Shield is engineered for protective coverage of U-bend sections in heat exchanger coils, superheaters, and boiler return bends. Manufactured from SS 410, a hardenable martensitic stainless steel, this shield provides excellent resistance to abrasion, oxidation, and moderate corrosion. The U-type design offers tailored protection to both inner and outer arcs of tube bends—critical areas vulnerable to erosion, thermal stress, and slag buildup in high-temperature environments. • Outer U Type Half Round Tube Shield – Shields the outer curvature of the bend against high-temperature oxidation, impact wear, and flue gas turbulence. • Inner U Type Half Round Tube Shield – Protects the inner radius from scaling, corrosive gas attack, and localized erosion caused by gas flow irregularities. Ladhani Metal Corporation supplies SS 410 U Type Half Round Tube Shields designed for durability and cost-effectiveness in applications where wear resistance and thermal stability are key performance requirements. Chemical Composition of SS 410 – Martensitic Stainless Steel • Carbon (C): 0.08 – 0.15% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 11.5 – 13.5% • Nickel (Ni): ≤ 0.75% • Iron (Fe): Balance Applications: Ideal for moderate corrosion environments and high-temperature zones where mechanical strength, scaling resistance, and surface hardness are essential. Uses • Shielding U-bend tube sections in power plant superheaters and reheaters • Protection of tube bends in industrial boilers and HRSG return loops • Coverage for high-wear tube areas in WHRBs and economizers • Safeguarding of steam reformer and heat exchanger return curves in refineries • Suitable for dry, high-temperature service conditions with limited corrosive exposure Features • High surface hardness – SS 410 can be heat-treated to improve abrasion and erosion resistance, suitable for high-wear areas. • Oxidation resistance – Performs well in dry air at elevated temperatures, offering effective scaling resistance during continuous heating cycles. • Inner and outer coverage – Available in both configurations for complete U-bend protection, reducing risk of localized tube failure. • Precision fit – Fabricated to exact bend radius and tube diameter for a stable and secure installation. • Easy to install – Can be mounted using clamps, banding, or welding methods without major system modifications. • Economical option – Offers a cost-effective solution for environments where chemical corrosion is minimal but mechanical wear is high. Applications • thermal power plants – Protects U-bend tubes in reheaters and superheaters from oxidation, slag deposits, and particulate erosion. Improves thermal zone durability. • chemical and fertilizer industries – Installed in systems where temperature resistance is more critical than corrosion protection. Helps extend tube service life under cyclic heat conditions. • waste heat recovery units – Shields return bends in WHRBs and economizers exposed to hot gas streams and turbulent flow. • refinery and process heaters – Used in units with limited corrosive exposure where surface scaling and impact wear are primary concerns. • cement and metallurgical plants – Ideal for steam and gas heating lines where wear resistance at elevated temperatures is essential. Conclusion The SS 410 U Type Half Round Tube Shield from Ladhani Metal Corporation provides reliable and economical protection for U-bend tubes in heat-intensive, erosion-prone environments. With its martensitic structure and good thermal resistance, SS 410 is well-suited for applications where mechanical wear, oxidation, and surface degradation are key operational challenges. Customizable in size and bend radius, these shields deliver cost-efficient, high-performance solutions for extending tube life and reducing unplanned maintenance. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are robust, precision-fabricated protective sleeves designed to guard the outer surfaces of tubes in boilers, heat exchangers, incinerators, and high-temperature processing equipment. Engineered to extend the service life of tubes exposed to corrosive gases, abrasive particulates, and elevated temperatures, these shields provide a reliable barrier against mechanical and chemical degradation. The half-round design facilitates easy installation while ensuring a secure, form-fitting layer of defense. 1Cr13 Half Round Tube Shield The 1Cr13 Half Round Tube Shield is a semi-cylindrical component manufactured from martensitic stainless steel containing approximately 13% chromium. Classified under the 1Cr13 grade, this alloy delivers good corrosion resistance, excellent wear performance, and moderate strength at elevated temperatures. It is especially suited for thermal environments that are not extremely oxidizing or carburizing but where erosion and mechanical wear are a concern. With a higher hardness potential through heat treatment and moderate thermal resistance, 1Cr13 shields are ideal for applications involving flue gas exposure, soot-laden atmospheres, and temperature cycling. The shield’s half-round configuration is precision-engineered for optimal tube coverage and long-term durability. It offers a balance of strength, corrosion resistance, and cost-effectiveness, making it suitable for a wide range of industrial processes. Chemical Composition of 1Cr13 – Martensitic Stainless Steel • Carbon (C): 0.15 – 0.20% • Silicon (Si): ≤ 1.00% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Chromium (Cr): 12.0 – 14.0% • Nickel (Ni): ≤ 0.60% • Iron (Fe): Balance Uses • Boiler Tube Protection – Shields tube surfaces from flue gas erosion, ash particle abrasion, and soot buildup in economizers and waterwalls. • Heat Exchanger Tubes – Provides an extra layer of wear resistance in zones prone to mechanical stress and fluid turbulence. • Incinerator and Waste Heat Units – Guards tubes exposed to fluctuating temperatures, slag, and particulate deposits. • Cement Plant Piping – Protects tubing and ducts in kiln exhaust systems from abrasive dust and high flow velocity. • Air Preheaters and Recuperators – Enhances the durability of components subjected to temperature variations and corrosive gases. Features • Moderate Oxidation Resistance – Chromium content enables good performance in mildly oxidizing environments and intermittent exposure to high temperatures. • Wear and Abrasion Resistance – Martensitic structure offers high surface hardness and resistance to mechanical wear. • Heat Treatable – Can be hardened to increase durability and resistance to deformation. • Cost-Effective – Provides a lower-cost alternative to austenitic and superalloy shields for moderate service conditions. • High Dimensional Accuracy – Manufactured with tight tolerances to ensure secure fitment and uniform tube coverage. • Convenient Installation – Half-round shape enables quick mounting through welding or clamping techniques. • Versatile Finishing Options – Supplied with pickled or mechanically polished surfaces to improve corrosion resistance and adhesion. Applications • Power Generation – Used in economizer, preheater, and convection sections of boilers to prevent erosion and fouling. • Chemical and Fertilizer Plants – Protects exposed tube surfaces in systems with moderate chemical exposure. • Metallurgical Furnaces – Shields mechanical and flue components exposed to particulate movement and temperature cycling. • Pulp and Paper Industry – Used in recovery boilers and heat exchangers where corrosion resistance and mechanical strength are both required. • Petrochemical Plants – Applied in lower-temperature zones where scaling and erosion are primary concerns. Conclusion The 1Cr13 Half Round Tube Shield by Ladhani Metal Corporation provides an optimal solution for industrial tube protection in moderate temperature and corrosion environments. Its martensitic stainless steel composition ensures excellent wear resistance, good oxidation stability, and structural strength at a competitive cost. Designed for easy installation and reliable performance, these shields are ideal for various applications in power, process, and heat recovery systems. Custom-built to meet specific dimensions, material thicknesses, and finishing preferences, 1Cr13 tube shields offer dependable service life extension for critical heat transfer equipment. For technical specifications, pricing, or customization inquiries, please contact Ladhani Metal Corporation.

DIN 2633 carbon steel flanges PN 16 are reliable weld neck flanges manufactured in compliance with the DIN 2633 standard. Designed for use in medium-pressure piping systems with a pressure rating of up to 16 bar (232 psi), these flanges are fabricated from high-quality carbon steel, providing dependable mechanical strength and ease of fabrication. They are widely utilized in a range of general industrial and utility applications where corrosion resistance demands are moderate. Ladhani Metal Corporation is a globally trusted manufacturer and supplier of carbon steel flanges, recognized for high-precision production, rigorous quality assurance, and strict adherence to international material and dimensional standards. Every flange is tested to ensure consistent performance, mechanical integrity, and compatibility with a variety of piping systems. Pressure Rating: • PN 16 (16 bar / 232 psi): Suitable for medium-pressure systems requiring strong, cost-effective, and durable connections. Flange Type: • Weld Neck Flanges Featuring an extended tapered hub, weld neck flanges help evenly distribute mechanical stress and ensure secure, vibration-resistant joints, particularly effective in systems subject to bending or thermal expansion. • Flat Face (FF) Flanges Ideal for use with soft gaskets or cast iron components, flat face flanges ensure even gasket compression, reducing the risk of flange warping or over-tightening. Carbon Steel Grades and General Composition: Typical Carbon Steel Grade: ASTM A105 (for forged carbon steel flanges) • Carbon (C): 0.35% max • Manganese (Mn): 0.60 – 1.05% • Phosphorus (P): 0.035% max • Sulfur (S): 0.040% max • Silicon (Si): 0.10 – 0.35% • Iron (Fe): Balance Applications: Carbon steel flanges to DIN 2633 PN 16 are widely applied in environments where corrosion resistance is not the primary concern but where mechanical strength, weldability, and cost-efficiency are essential. Applications of DIN 2633 Carbon Steel Flanges PN 16: • Power Plants Used in steam, water, and air systems for medium-pressure operations. • Water Treatment and Distribution Well-suited for water mains, treatment facilities, and irrigation networks where strength and reliability are critical. • Petrochemical and Refining Industries Employed in non-corrosive process piping, utility lines, and support systems. • HVAC and Fire Protection Systems Ideal for chilled water, fire suppression, and compressed air applications. • General Industrial Manufacturing Used in structural piping systems and mechanical infrastructure with stable temperature and pressure conditions. Key Features: • Manufactured to DIN 2633 specifications • PN 16 pressure rating for medium-duty service • Weld neck configuration provides robust, leak-resistant connections • Cost-effective and easy to fabricate and install • Excellent machinability and weldability • Available in various sizes and configurations • Coating and corrosion protection options available upon request Conclusion: DIN 2633 carbon steel flanges PN 16 from Ladhani Metal Corporation are engineered for dependable performance in standard industrial environments. With proven strength, versatility, and affordability, these flanges are a reliable choice for water, steam, gas, and general utility applications. For detailed technical specifications, custom options, or pricing inquiries, contact Ladhani Metal Corporation today.

DIN 2628 Carbon Steel flanges PN 250 are heavy-duty weld neck flanges manufactured in accordance with the DIN 2628 standard, designed for use in high-pressure systems operating up to 250 bar (3625 psi). These flanges are crafted from robust carbon steel grades, offering excellent mechanical strength, weldability, and cost-efficiency. With high tensile strength and good resistance to wear and fatigue, carbon steel flanges are ideal for structural and pressure-bearing applications in industries where corrosion is not a primary concern or where protective coatings are applied. Ladhani Metal Corporation supplies a comprehensive range of DIN 2628 PN 250 Carbon Steel flanges, engineered for demanding industrial environments. Known for precision machining, quality assurance, and consistent performance, our flanges are widely used in sectors such as oil and gas, power generation, water treatment, construction, and mechanical engineering. These flanges provide a reliable connection in pipeline systems that require durable performance under high pressure and mechanical stress. Pressure Rating: • PN 250 (250 bar / 3625 psi): Designed for high-pressure applications that demand strength, durability, and tight sealing under elevated loads. Flange Type: • Weld Neck Flanges Equipped with a tapered hub that enhances mechanical stability and reduces stress concentration at the weld. Ideal for fluctuating temperatures and high-pressure service. • Flat Face (FF) Flanges Flat face design allows for even gasket compression, reducing the risk of leakage when connected to cast or brittle piping components. Carbon Steel Grades and Composition: Common Grades: ASTM A105, ASTM A350 LF2 ASTM A105 • Carbon (C): ≤ 0.35% • Manganese (Mn): 0.60 – 1.05% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.040% • Silicon (Si): 0.10 – 0.35% Applications: Forged carbon steel used in ambient and high-temperature service. Ideal for valves, fittings, and flanges in oil, gas, and industrial pipelines. ASTM A350 LF2 • Carbon (C): ≤ 0.30% • Manganese (Mn): 0.60 – 1.35% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.040% • Silicon (Si): 0.15 – 0.30% Applications: Low-temperature carbon steel suitable for cryogenic and sub-zero environments. Commonly used in pipeline systems, compressors, and pressure vessels. Applications of DIN 2628 Carbon Steel Flanges PN 250: • Oil and Gas Pipelines Used in high-pressure oil, gas, and petrochemical systems where strength and structural integrity are critical. • Power Generation Applied in steam and thermal power plants, including boiler systems and heat exchangers. • Mechanical and Structural Systems Suitable for heavy-duty machinery, process piping, and structural pipe connections. • Water Treatment and Distribution Utilized in potable water and wastewater infrastructure requiring reliable, high-strength components. • HVAC and Industrial Utilities Installed in heating, ventilation, and compressed air systems operating at elevated pressures. Key Features: • Complies with DIN 2628 standard for high-pressure flange applications • PN 250 rating supports high-load, high-stress operational conditions • Weld neck design for optimal flow and reduced weld stress • Flat face option for even gasket pressure and secure sealing • Available in ASTM A105 and A350 LF2 grades • High mechanical strength and excellent machinability • Cost-effective option for non-corrosive or coated environments • Custom sizes, finishes, and drilling patterns available upon request Conclusion: DIN 2628 Carbon Steel Flanges PN 250 by Ladhani Metal Corporation offer a durable, economical solution for high-pressure systems in a variety of industrial applications. With excellent mechanical strength and versatility, these flanges are engineered to perform reliably in demanding environments where corrosion resistance is secondary to pressure and structural requirements. Contact Ladhani Metal Corporation for specifications, technical assistance, or to request a custom quotation for your project needs.

DIN 2627 Carbon Steel flanges PN 400 are high-strength blind flanges designed for use in high-pressure applications across a wide range of industrial systems. Manufactured in accordance with the DIN 2627 standard, these flanges are primarily used to isolate piping systems by sealing off the end of a pipeline or vessel opening. The PN 400 pressure rating (400 bar / 5800 psi) ensures reliable performance under intense pressure and mechanical stress. Carbon steel flanges offer excellent tensile strength, impact resistance, and structural integrity, making them a cost-effective solution for systems where corrosion resistance is not the primary concern. Typically used in applications involving water, steam, oil, and gas, DIN 2627 carbon steel blind flanges are well-suited for power plants, refineries, petrochemical facilities, and general industrial systems. Ladhani Metal Corporation is a trusted global manufacturer and exporter of carbon steel flanges, producing components that meet rigorous international standards for material quality, dimensional accuracy, and pressure containment. Pressure Rating: • PN 400 (400 bar / 5800 psi): Suitable for extremely high-pressure systems in industrial pipelines and mechanical installations. Flange Type: • Blind Flanges Solid, non-bored flanges used to terminate flow or provide system isolation. Commonly used for pressure testing, maintenance access, and future expansion. • Flat Face (FF) Flanges Flat sealing surfaces designed for use with full-face gaskets and flat-faced mating flanges. Promotes even bolt loading and effective sealing under high-pressure conditions. Carbon Steel Grades and Composition: ASTM A105 (Forged Carbon Steel) • Carbon (C): ≤ 0.35% • Manganese (Mn): 0.60 – 1.05% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.040% • Silicon (Si): 0.10 – 0.35% Applications: Commonly used for high-temperature and high-pressure systems. Ideal for oil and gas, steam, and hydraulic systems. ASTM A350 LF2 (Low-Temperature Carbon Steel) • Carbon (C): ≤ 0.30% • Manganese (Mn): 0.60 – 1.35% • Silicon (Si): 0.15 – 0.30% • Nickel (Ni): ≤ 1.0% Applications: Suitable for sub-zero temperature services such as cryogenic systems, LNG processing, and cold-weather pipelines. Applications of DIN 2627 Carbon Steel Flanges PN 400: • Oil and Gas Transmission Lines Used in pipeline systems and refineries handling hydrocarbons under high pressure. • Steam and Power Generation Plants Ideal for high-pressure steam lines, condensate systems, and boiler feedwater applications. • Petrochemical and Chemical Industries Suitable for handling neutral and non-aggressive chemical fluids and process gases. • Water Treatment and Pumping Stations Used in high-pressure water systems, including pumping stations, pressure regulators, and testing units. • Heating, Ventilation, and Air Conditioning (HVAC) Employed in high-pressure chilled water and steam systems for industrial facilities. • General Manufacturing and Engineering Systems Reliable for structural piping systems in factories and mechanical installations. Key Features: • Compliant with DIN 2627 specifications • PN 400 pressure rating for ultra-high-pressure systems • Blind flange design allows for system isolation and pressure containment • Flat face design compatible with full-face gaskets and flat mating surfaces • Manufactured from forged carbon steels like ASTM A105 and A350 LF2 • Excellent strength, ductility, and impact resistance • Economical and durable for non-corrosive environments • Widely used across oil and gas, power, chemical, and water treatment sectors • Custom sizes, pressure classes, surface coatings, and face types available upon request Conclusion: DIN 2627 Carbon Steel Flanges PN 400 from Ladhani Metal Corporation are engineered for high-performance applications requiring strength, pressure retention, and reliability in demanding industrial environments. Whether used in power plants, oil pipelines, or steam systems, these flanges provide durable and cost-effective sealing for critical operations. Contact Ladhani Metal Corporation for product specifications, technical support, or custom solutions tailored to your piping system requirements.

DIN 2576 Carbon Steel Flanges PN 10 are slip-on type flanges manufactured in accordance with the DIN 2576 standard, suitable for piping systems operating under low to moderate pressures. Made from high-quality carbon steel, these flanges offer good mechanical strength and are cost-effective solutions for a wide range of industrial applications where corrosion resistance is not the primary concern. The slip-on design allows easy fitting over the pipe and facilitates welding on both the inner and outer edges, ensuring reliable and leak-proof connections. Ladhani Metal Corporation is a reputed manufacturer and global supplier of carbon steel flanges, delivering components that comply with international quality and dimensional standards. DIN 2576 carbon steel flanges are widely used in general-purpose piping systems across industries such as oil and gas, power generation, HVAC, water treatment, and process industries. Pressure Rating: • PN 10 (10 bar / 145 psi): Suitable for use in low to medium pressure systems with stable operational demands. Flange Types: • Slip-On Flanges These flanges slide over the pipe end and are welded on both sides, allowing for simple installation and strong mechanical joints. • Flat Face (FF) Flanges Designed to mate with flat gaskets and flat surfaces, suitable for systems involving cast iron or non-metallic components. Carbon Steel Grades and Composition: Common Grades: • ASTM A105 (Forged Carbon Steel) • ASTM A516 Grade 70 (Pressure Vessel Quality Steel) • IS 2062 (Structural Carbon Steel) Typical Composition (ASTM A105): • Carbon (C): 0.35% max • Manganese (Mn): 0.60 – 1.05% • Phosphorus (P): 0.035% max • Sulfur (S): 0.040% max • Silicon (Si): 0.10 – 0.35% Applications: DIN 2576 carbon steel flanges are preferred in systems where high strength is required and the risk of corrosion is minimal or controlled through external protection (e.g., coatings or linings). Common applications include: • Oil and Gas Transmission Used in pipelines and flowlines where moderate pressures are involved. • Power Plants Suitable for steam, water, and air systems in thermal and hydroelectric power stations. • Water Treatment and Distribution Employed in clean water and wastewater systems, including pumping stations and storage tanks. • HVAC Systems Utilized in heating, ventilation, and air conditioning ducting and piping. • Chemical and Petrochemical Applied in non-corrosive fluid handling and auxiliary systems. • Structural and Fabrication Works Used in non-pressure retaining structural supports and frames. Key Features: • Manufactured to DIN 2576 standards • PN 10 pressure rating for medium-duty applications • Cost-effective and mechanically strong • Available in a variety of carbon steel grades • Slip-on design offers ease of installation and alignment • Flat face design compatible with flat gaskets and soft materials • Ideal for industrial sectors with controlled or minimal corrosion environments • Custom drilling, dimensions, and surface treatments available Conclusion: DIN 2576 Carbon Steel Flanges PN 10 by Ladhani Metal Corporation offer a practical and economical solution for low to moderate pressure piping systems. With reliable performance, ease of installation, and availability in various carbon steel grades, these flanges are suited for a broad range of applications in power, water, oil and gas, and infrastructure industries. For detailed specifications, material compatibility, or project-based orders, contact Ladhani Metal Corporation today.

Ladhani Metal Corporation offers 1Cr25Ni20Si2 Boiler Half Round Tube Shields engineered for superior protection of boiler tubes in extremely high-temperature and abrasive service environments. Manufactured from a heat-resistant austenitic stainless steel alloy with high chromium, nickel, and silicon content, 1Cr25Ni20Si2 delivers exceptional resistance to oxidation, carburization, and high-temperature scaling. The added silicon improves anti-oxidation properties and enhances structural stability during prolonged thermal exposure. These shields are precision-formed into a half-round profile to ensure accurate coverage of straight boiler tube sections. They provide a durable physical barrier against flue gas erosion, soot blower impact, and particle-laden gas flow, significantly extending the operational life of boiler tubes. Ladhani Metal Corporation manufactures, supplies, and exports 1Cr25Ni20Si2 Boiler Half Round Tube Shields in a wide range of sizes, thicknesses, and lengths, catering to both domestic and international markets. 1Cr25Ni20Si2 Grade Chemical Composition – Heat Resistant Austenitic Stainless Steel • Carbon (C): ≤ 0.12% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): 1.50 – 2.50% • Chromium (Cr): 24.00 – 26.00% • Nickel (Ni): 19.00 – 22.00% • Iron (Fe): Balance Uses • Shields straight boiler tubes in superheaters, reheaters, and economizers • Protects against oxidation, scaling, and particulate erosion • Suitable for carburizing and high-silicon demanding environments • Extends tube life in power generation and process heating units Features • Enhanced oxidation resistance – Silicon addition boosts scale resistance at extreme temperatures • Superior thermal stability – Maintains mechanical integrity during prolonged heat exposure • Precision-engineered profile – Ensures a secure and accurate fit over boiler tubes • Flexible installation – Can be welded, clamped, or banded based on site requirements • Export-ready – Compliant with international quality and dimensional standards Applications • Thermal power stations – Protects superheater and reheater tubes from oxidation and erosion • Waste heat boilers – Guards tubes in severe heat recovery operations • Petrochemical and refinery heaters – Resists carburization in furnace conditions • Metallurgy and cement industries – Provides reliable tube protection under abrasive, high-heat gas flows Conclusion The 1Cr25Ni20Si2 Boiler Half Round Tube Shield from Ladhani Metal Corporation is designed for extreme service conditions where oxidation, scaling, and high-temperature wear are major concerns. With its silicon-enhanced heat-resistant alloy composition and precise manufacturing, it ensures prolonged boiler tube life and reduced downtime. Available in customized sizes for both domestic and export orders, these shields offer dependable performance in the world’s toughest boiler and furnace environments. For specifications and order inquiries, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield

Half Round Tube Shield Ladhani Metal Corporation manufactures Cr25Ni20 Half Round Straight Tube Shields for use in high-temperature industrial environments where resistance to oxidation, carburization, and thermal fatigue is critical. Cr25Ni20 is a heat-resistant alloy with a high chromium (25%) and nickel (20%) content, offering excellent stability under prolonged exposure to high heat and corrosive flue gases. This alloy is widely used in boilers, reformers, waste heat recovery systems, and thermal process units. Cr25Ni20 Half Round Straight Tube Shield The Cr25Ni20 Half Round Straight Tube Shield is precisely shaped to fit the outer surface of straight heat exchanger or boiler tubes. It forms a durable, semi-cylindrical layer of protection against high-temperature scaling, tube thinning, and erosion caused by particulate-laden flue gas. The shield enhances tube longevity in radiation zones and areas prone to direct flame or high-velocity gas flow. Its excellent thermal shock resistance also makes it suitable for cyclic heating and cooling conditions. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of Cr25Ni20 Half Round Straight Tube Shields, delivering robust thermal shielding solutions for critical tube protection. Material Grade Cr25Ni20 – High chromium-nickel heat-resistant alloy Chemical Composition of Cr25Ni20 • Carbon (C): ≤ 0.08% • Silicon (Si): ≤ 1.5% • Manganese (Mn): ≤ 2.0% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Uses • Protection of boiler tubes in radiant and convection zones • Straight tube shielding in reformers and furnace outlets • High-temperature air and gas heater shielding • Application in coal gasification and petrochemical furnaces • Tube erosion prevention in thermal incineration units Features • Excellent high-temperature performance – Operates reliably above 1000°C • Resistant to oxidation and scale – Maintains surface integrity in oxidizing environments • Superior creep strength – Suitable for long-term service under thermal stress • Effective in carburizing atmospheres – Ideal for furnaces and gas reactors • Thermal fatigue resistance – Withstands repeated heating and cooling cycles • Custom fabrication – Available in multiple lengths, thicknesses, and diameters Applications • power generation boilers – Radiant zone tube protection • thermal cracking units – Resistant to flame impingement and high gas velocity • waste heat recovery boilers – Prolongs tube life in high-ash flue gas areas • fertilizer plants – Used in ammonia reformer tube protection • metallurgical furnaces – Shields exposed tubes in extreme temperature cycles Conclusion Cr25Ni20 Half Round Straight Tube Shields from Ladhani Metal Corporation offer outstanding durability and heat resistance, making them ideal for straight tubes operating in the most demanding high-temperature applications. Their high chromium and nickel content ensures reliable service where oxidation, erosion, and thermal cycling are a concern. For custom sizes, specifications, or technical consultations, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #halftubeshield #utypehalftubeshield