Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered protective components designed to guard boiler and heat exchanger tubes from erosion, slag buildup, scaling, and high-temperature corrosion. These shields are widely used in power plants, petrochemical units, and thermal systems where tubes are exposed to hot gases, mechanical wear, and corrosive media. Their half-round structure ensures a secure fit over straight or curved tube sections, extending operational life and reducing tube failure. 1Cr18Ni9Ti U Type Outer Half Round Tube Shield The 1Cr18Ni9Ti U Type Outer Half Round Tube Shield is manufactured using a titanium-stabilized austenitic stainless steel known for its excellent corrosion resistance, high-temperature performance, and resistance to intergranular corrosion. This outer U-type shield is specifically designed to protect the external arc of U-bend tubes in boilers, heat exchangers, and superheaters where surface exposure to oxidizing gases and abrasive particles is common. Titanium stabilization improves weldability and structural integrity in high-temperature environments. • Outer U Type Half Round Tube Shield – Shields the outer curve of U-bend tubes from direct flame impingement, gas flow erosion, slag accumulation, and high-heat oxidation. Ladhani Metal Corporation is a reputable manufacturer, supplier, and exporter of 1Cr18Ni9Ti U Type Outer Half Round Tube Shields, offering durable and thermally stable solutions for critical industrial systems. Chemical Composition of 1Cr18Ni9Ti – Titanium-Stabilized Austenitic Stainless Steel • Carbon (C): ≤ 0.12% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 17.0 – 19.0% • Nickel (Ni): 8.0 – 11.0% • Titanium (Ti): ≥ 5 × C content • Iron (Fe): Balance Applications: Suitable for high-temperature, oxidizing, and corrosive environments where intergranular corrosion resistance and weldability are critical. Uses • Protection of outer U-bend surfaces in superheaters and reheaters of thermal and nuclear power plants • Shielding external arcs in waste heat recovery boilers (WHRBs) and HRSGs exposed to hot flue gases and ash particles • Applied in return bends of heat exchangers and reformers handling oxidizing and sulfur-bearing gases • Suitable for marine, petrochemical, and high-pressure steam systems requiring resistance to heat-induced corrosion • Used in welded applications where post-weld corrosion resistance and long-term structural stability are necessary Features • Excellent intergranular corrosion resistance – Titanium addition stabilizes carbon, preventing carbide precipitation during welding • High-temperature strength – Maintains structural integrity and oxidation resistance up to 850–900°C • Outer U-bend protection – Shields the most exposed and vulnerable arc from flame, thermal stress, and erosion • Precision engineering – Manufactured to exact tube radii and dimensions for a secure, movement-free installation • Easy to install – Can be mounted with clamps, stainless steel bands, or tack welds without dismantling the system • Long operational life – Reduces tube wear and thermal damage, improving overall system reliability Applications • power generation – Installed in superheater and reheater return bends exposed to thermal cycling and flue gas erosion • petrochemical plants – Protects U-bend tubes in reformers and exchangers from high-temperature and chemical degradation • waste heat recovery – Used in WHRBs and HRSGs to shield against slag buildup, scale formation, and high-velocity gas impact • marine and offshore systems – Suitable for condensers and heat exchangers exposed to salt-laden, oxidizing environments • industrial furnaces – Applied to radiant coils and return bends exposed to sustained heat and direct flame Conclusion The 1Cr18Ni9Ti U Type Outer Half Round Tube Shield by Ladhani Metal Corporation—manufacturer, supplier, and exporter—is a robust and thermally stable solution for protecting U-bend tube outer arcs in high-temperature and corrosive environments. With superior resistance to intergranular corrosion, oxidation, and thermal fatigue, this shield is ideal for boilers, heat exchangers, and petrochemical equipment requiring long-term protection and reliable performance. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation.

What is a Half Round Tube Shield? A Half Round Tube Shield is a specially designed metal cover that fits over the external curvature of tubes or pipes. It is commonly used in boilers, heat exchangers, and various high-temperature piping systems to prevent damage caused by erosion, corrosion, high-velocity gas flow, and thermal fatigue. These shields serve as a first line of defense by absorbing mechanical and chemical wear, thereby significantly extending the life of the underlying tubes. Tube shields are essential in high-stress areas where exposure to combustion gases, ash particles, or high-velocity steam can quickly degrade unprotected surfaces. By preventing direct impact on the base metal, they help reduce operational downtime, lower maintenance costs, and prevent unexpected system failures. In boiler systems, tube shields are especially important to avoid tube thinning and ruptures, ensuring safer and more efficient operation. Product Overview At Ladhani Metal Corporation, we manufacture and supply premium-quality Half Round Tube Shields for a wide range of industrial applications. Our products are known for their dimensional accuracy, durability, and superior resistance to wear and corrosion. Designed for harsh operating environments, our tube shields can be customized in terms of thickness, radius, length, and grade to suit specific operating requirements. Whether you require protection for straight tubes, bends, or special boiler tube configurations, we have a solution tailored for you. Available Grades We manufacture Half Round Tube Shields using high-performance stainless steel and alloy steel grades that are selected based on their mechanical strength, temperature tolerance, and corrosion resistance. Stainless Steel Grades: • SS 304, SS 304L • SS 316, SS 316L • SS 310, SS 310S • SS 410, SS 420, SS 430 Heat-Resistant & Alloy Steel Grades: • 1Cr18Ni9Ti • Cr25Ni20 • 1Cr25Ni20Si2 • Cr23Ni13 • 1Cr20Ni14Si2 • 1Cr13 These materials ensure the shields can withstand aggressive media, thermal cycling, and high-velocity particulate flow without cracking or deforming over time. Types of Half Round Tube Shields We offer various forms of Half Round Tube Shields to match different tube geometries and boiler configurations: • U-Type Half Round Tube Shield Designed to cover both the top and sides of the tube, offering extended protection in U-bend areas where wear is most common. • U-Type Outer Half Round Tube Shield Specifically shaped to shield the outer curvature of U-bend tubes, ideal for areas exposed to direct flame or gas flow. • U-Type Inner Half Round Tube Shield Fits the inner curvature of U-bend tubes to protect against erosion caused by high-velocity media turning around the bend. • Half Round Tube Shield for LTSH Type Custom-made to fit tubes in Low Temperature Super Heater (LTSH) sections, providing protection from ash and flue gases. • Half Round Straight Tube Shield Standard half-round shields used for straight tube sections, offering easy installation and effective protection. • Half Round Tube Shield for R/H Tube Designed for Reheater (R/H) tubes, typically found in high-temperature zones; made from heat-resistant materials. • Half Round Shield for Tube A general-purpose shield suitable for various industrial tubes requiring surface protection. • Half Round Tube Shield for WW Screen Engineered to fit water wall screen tubes, protecting against slagging and high radiant heat. • Half Round Tube Shield for Boiler Tube Specifically designed for boiler applications, these shields reduce wear cau Each type is designed for easy integration into existing boiler or piping systems, whether for repair, reinforcement, or preventive maintenance. Key Features ✔ High Durability – Effectively resists erosion, mechanical abrasion, scaling, and chemical attack ✔ Accurate Half-Round Fit – Custom-formed to ensure close contact and full protection of tube surface ✔ Weld-On or Clip-On Installation – Offers flexibility based on site requirements and installation methods ✔ Custom Sizes Available – Tailored to meet specific pipe diameters, wall thicknesses, and operating conditions ✔ Corrosion & Heat Resistance – Performs reliably under prolonged exposure to high temperatures and corrosive flue gases Conclusion Half Round Tube Shields by Ladhani Metal Corporation provide robust protection for critical tubing in boilers, heat exchangers, and high-temperature piping systems. Manufactured with a focus on performance, longevity, and ease of installation, these shields are a dependable solution for industrial operators aiming to enhance system reliability and reduce unplanned maintenance. 📩 Get in touch with us today for customized solutions, bulk order pricing, or technical consultations tailored to your specific industry requirements.

Ladhani Metal Corporation manufactures, supplies, and exports a comprehensive range of Erosion Protection Shields designed to safeguard boiler tubes, superheater tubes, and reheater tubes in power plants, industrial boilers, and heat recovery systems. These shields, also known as half round tube shields or boiler tube erosion shields, act as a protective cover over tubes exposed to high-velocity flue gases, abrasive fly ash, and soot blower impact. By reducing direct contact with erosive and corrosive media, they significantly extend the service life of tubes and minimize unplanned shutdowns. Function of Erosion Protection Shields • Provide a wear-resistant barrier for boiler tubes in erosive zones • Reduce damage caused by abrasive ash particles and high-velocity flue gases • Protect against soot blower jet erosion and localized overheating • Extend operational life of tubes, lowering maintenance and replacement costs Available Grades • SS 304 / SS 304L • SS 310 / SS 310S • SS 316 / SS 316L • SS 410 / SS 420 / SS 430 • 1Cr13 • 1Cr18Ni9Ti • Cr25Ni20 • 1Cr25Ni20Si2 • Cr23Ni13 • 1Cr20Ni14Si2 Ladhani Metal Corporation manufactures Erosion Protection Shields in multiple lengths, diameters, and thicknesses, customized to fit various tube sizes and curvature requirements. All shields are precision-engineered for easy installation and secure fitment, ensuring reliable performance even under extreme boiler conditions. Applications • Power generation boilers – protection of superheater, reheater, and economizer tubes • Waste Heat Recovery Boilers (WHRBs) – safeguard against flue gas erosion • Heat Recovery Steam Generators (HRSGs) – protect tubes under continuous high-velocity gas exposure • Petrochemical process heaters and industrial steam systems – long-lasting erosion and oxidation resistance Features • Wide material grade availability to suit varied service conditions • High resistance to oxidation, scaling, and erosion at elevated temperatures • Low maintenance solution that improves tube reliability and lifespan • Export-ready specifications with assured quality and durability Conclusion Erosion Protection Shields from Ladhani Metal Corporation are engineered to deliver long-term protection for boiler tubes operating in highly erosive and corrosive environments. With a wide range of stainless steel and alloy grades available, these shields provide tailored solutions for diverse industrial applications, ensuring maximum efficiency and reduced operational downtime. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #HalfRoundReheaterShield #ReheaterTubeShield #BoilerReheaterProtection #PowerPlantTubeShield #BoilerErosionShield #SteamBoilerTubeShield #HighTempTubeShield #BoilerWearProtection

Ladhani Metal Corporation offers 1Cr20Ni14Si2 Outer Half Round 90 Degree Bend Tube Shields designed to protect the outer curvature of U-bends and 90-degree tube turns in high-temperature and moderately corrosive service environments. The half-round shields are precision-formed to fit the external radius of return bends, offering direct protection against erosion, scaling, and impact from soot blowing and ash-laden gas flow. 1Cr20Ni14Si2 shields are suitable for use in thermal power stations, waste heat recovery boilers, incinerators, and petrochemical plants operating at elevated temperatures. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of 1Cr20Ni14Si2 Outer Half Round 90 Degree Bend Tube Shields, offering customizable sizes and configurations to meet the demands of varied industrial applications. 1Cr20Ni14Si2 Grade Chemical Composition – Austenitic Heat-Resistant Steel • Carbon (C): ≤ 0.15% • Manganese (Mn): ≤ 1.50% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): 1.50 – 2.50% • Chromium (Cr): 19.0 – 21.0% • Nickel (Ni): 13.0 – 15.0% • Iron (Fe): Balance Uses • Protects 90-degree bends in superheater and reheater tubes in power generation systems • Used in WHRBs and HRSGs exposed to oxidizing and dry gas flow • Shields heat exchanger and furnace tubing from scale formation and high-velocity gas erosion • Suitable for return bends in chemical and thermal processing units requiring heat durability Features • High oxidation resistance – Enhanced by silicon for long-term performance at elevated temperatures • Excellent heat stability – Resists deformation, fatigue, and creep during prolonged thermal cycling • Mechanical durability – Maintains structural integrity in harsh operating conditions • Precision-formed fit – Matches tube curvature for optimal surface coverage and protection • Adaptable installation – Can be welded, banded, or clamped to suit on-site assembly methods • Broad availability – Offered in a range of diameters, wall thicknesses, and arc lengths Applications • Thermal power plants – Shields superheater and reheater bends from erosion and surface scaling • Petrochemical and chemical processing – Protects tubing in high-temperature reaction and heating zones • Waste incineration and heat recovery – Guards bends in units subjected to corrosive and abrasive gas streams • Cement and metallurgy industries – Applied in tube shields for high-heat rotary kilns and preheater units Conclusion The 1Cr20Ni14Si2 Outer Half Round 90 Degree Bend Tube Shield by Ladhani Metal Corporation offers dependable protection for tube bends in high-temperature and oxidizing environments. With enhanced thermal and oxidation resistance, these shields extend the life of heat-exposed tubing while maintaining mechanical reliability. For product customization, material selection, or technical specifications, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #halftubeshield #utypehalftubeshield #tubeshieldexporter

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are specially designed to protect boiler, superheater, and heat exchanger tubes from erosion, scaling, and thermal damage in high-temperature environments. These shields are essential in applications where tube surfaces are exposed to abrasive flue gases, slag buildup, and turbulent flow conditions. Their half-round design allows secure placement over straight or curved tube sections, offering durable protection and prolonging service life without requiring major system modifications. SS 420 U Type Inner Half Round Tube Shield The SS 420 U Type Inner Half Round Tube Shield is manufactured from martensitic stainless steel grade 420, known for its high surface hardness, excellent wear resistance, and fair corrosion resistance. This grade is ideal for applications where mechanical erosion is a concern. The inner U-type configuration is engineered to protect the internal curvature of U-bend tubes, which are commonly affected by localized turbulence, scale accumulation, and repeated thermal cycling. • Inner U Type Half Round Tube Shield – Specifically designed to guard the internal arc of U-bend tubes from erosion, slag impact, and high-temperature scaling. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of SS 420 U Type Inner Half Round Tube Shields, offering durable and cost-effective protective components for demanding industrial environments. Chemical Composition of SS 420 – Martensitic Stainless Steel • Carbon (C): 0.15 – 0.40% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 12.0 – 14.0% • Iron (Fe): Balance Applications: Ideal for systems where tubes are exposed to abrasive gases, slag, and scaling, especially where high surface hardness and moderate corrosion resistance are required. Uses • Installed on the inner arc of U-bend tubes in high-temperature boiler and superheater sections • Shields return bends in WHRBs, HRSGs, and industrial furnace coils exposed to abrasive or turbulent flow • Applied in curved tube sections of heat exchangers and reformers subject to slag and scale deposits • Used in chemical and petrochemical units handling combustion gases and steam • Effective in power and process plants where mechanical wear and erosion resistance are crucial Features • High wear resistance – Excellent surface hardness provides long-lasting protection in abrasive environments • Inner arc coverage – Shields areas prone to turbulence, scale buildup, and gas erosion • Thermal durability – Performs reliably in elevated temperature service conditions up to 650°C • Custom design – Tailored to match the exact tube bend radius and diameter for optimal protection • Simple installation – Compatible with clamp-on, weld-on, or banding methods for secure fitment • Economical solution – Combines durability and affordability for routine and critical tube protection needs Applications • thermal power plants – Protects inner surfaces of U-bends in superheaters and economizers from erosion • petrochemical processing – Shields tube bends exposed to acidic and particulate-laden gases • waste heat recovery units – Guards against scale and slag accumulation in WHRB and HRSG return bends • chemical industries – Provides erosion resistance in heat exchanger bends carrying corrosive vapors • furnaces and process heaters – Used on return coil sections exposed to direct flame or hot gases Conclusion The SS 420 U Type Inner Half Round Tube Shield by Ladhani Metal Corporation – manufacturer, supplier, and exporter – offers robust inner arc protection for U-bend tubes in high-wear and high-temperature applications. Its excellent hardness and mechanical resilience make it well-suited for thermal systems facing abrasive and corrosive environments. For technical assistance, customization, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are engineered to protect boiler and heat exchanger tubes from surface erosion, slag deposition, scaling, and mechanical damage in high-temperature operating conditions. These shields are widely used in power plants, thermal processing units, and industrial boilers where tube surfaces face direct exposure to flue gases and abrasive particles. The half-round structure allows for easy installation over curved or straight sections, providing long-term tube protection and reducing unplanned maintenance. 1Cr13 U Type Outer Half Round Tube Shield The 1Cr13 U Type Outer Half Round Tube Shield is manufactured from 1Cr13, a martensitic stainless steel with good hardness, moderate corrosion resistance, and excellent resistance to high-temperature oxidation. This outer U-type configuration is designed to shield the outer arc of U-bend tubes where erosion, scaling, and heat-induced wear are most intense. With its balance of strength and heat resistance, 1Cr13 is suitable for service in moderately corrosive environments involving flue gas exposure and mechanical impact. • Outer U Type Half Round Tube Shield – Covers the outer curve of U-bend tubes, providing a protective barrier against gas erosion, flame impingement, and slag buildup. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of 1Cr13 U Type Outer Half Round Tube Shields, offering reliable protection for industrial systems operating under high thermal and abrasive conditions. Chemical Composition of 1Cr13 – Martensitic Stainless Steel • Carbon (C): ≤ 0.15% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 12.0 – 14.0% • Iron (Fe): Balance Applications: Suitable for applications with moderate corrosion exposure and high thermal and mechanical stress, including utility boilers, heat exchangers, and furnace systems. Uses • Protection of U-bend outer arcs in superheaters and reheaters in power and utility boilers • Shielding external tube curves in economizers, waste heat recovery units, and HRSGs • Coverage for return bends in industrial exhaust systems and flue gas ducts • Ideal for process heaters, furnace tubes, and high-temperature steam lines exposed to soot, slag, and scale • Suitable for systems requiring mechanical protection and moderate corrosion resistance Features • Good mechanical strength – Martensitic structure provides resistance to wear, abrasion, and high-velocity gas flow • Moderate corrosion resistance – Chromium content offers basic protection in mildly corrosive or oxidizing environments • Thermal stability – Maintains structural integrity in high-temperature zones with consistent exposure to flue gases • Outer arc protection – Specifically designed to guard the most exposed surface of U-bend tubes • Custom fit – Manufactured to match specific tube diameters and bend radii for precise, secure installation • Easy to install – Fastened using clamps, stainless bands, or tack welds without disrupting system operation • Economical and durable – Offers a cost-effective solution for extending tube service life under moderate conditions Applications • power plants – Used on U-bend outer arcs in superheaters and economizers to resist scaling and erosion • chemical and refining industries – Shields outer tube curves in process heaters exposed to heat and mechanical wear • waste heat recovery systems – Protects U-bend surfaces from slag and particulate impact in WHRBs and HRSGs • general industrial boilers – Provides protection in high-heat flue gas paths with minimal chloride exposure • metallurgy and cement processing – Applied in return bends in heating systems exposed to high-temperature dust and gas streams Conclusion The 1Cr13 U Type Outer Half Round Tube Shield by Ladhani Metal Corporation—manufacturer, supplier, and exporter—is a robust and cost-effective solution for shielding U-bend tube outer surfaces in boilers, heat exchangers, and industrial furnace systems. With reliable mechanical strength, moderate corrosion resistance, and high-temperature performance, this shield is ideal for systems requiring durable protection in abrasive and thermally demanding conditions. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-crafted protective components used to shield boiler and heat exchanger tubes from high-temperature oxidation, slag accumulation, erosion, and thermal fatigue. These shields are essential in industrial systems where tubes are exposed to flue gases, particulate flow, and repeated heating cycles. Their half-round design enables efficient and secure installation over straight or curved tube sections, significantly extending tube life and reducing maintenance frequency. 1Cr25Ni20Si2 U Type Outer Half Round Tube Shield The 1Cr25Ni20Si2 U Type Outer Half Round Tube Shield is manufactured from a high-temperature resistant austenitic alloy containing 25% chromium, 20% nickel, and 2% silicon. This combination offers excellent oxidation resistance, strong thermal stability, and enhanced anti-scaling performance at elevated temperatures. Designed specifically to cover the outer arc of U-bend tubes, this shield protects surfaces most exposed to hot gases, flame impingement, and corrosive particles in demanding thermal environments. • Outer U Type Half Round Tube Shield – Protects the external arc of U-bend tubes from direct exposure to slag, high-velocity flue gas, and oxidizing atmospheres. Ladhani Metal Corporation is a reputed manufacturer, supplier, and exporter of 1Cr25Ni20Si2 U Type Outer Half Round Tube Shields, offering durable and heat-resistant solutions for thermal, petrochemical, and metallurgical applications. Chemical Composition of 1Cr25Ni20Si2 – Austenitic Heat-Resistant Alloy • Carbon (C): ≤ 0.10% • Manganese (Mn): ≤ 1.50% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): 1.50 – 2.50% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Applications: Best suited for environments requiring resistance to oxidation, thermal cycling, and high-temperature corrosion, especially in furnaces and exhaust systems. Uses • Outer arc protection of U-bend tubes in reheaters and superheaters exposed to slag, flame, and flue gas in power plants • Shielding external curves of return bends in waste heat recovery units (WHRBs) and HRSGs • Applied in radiant coils and heat exchanger bends operating in high-temperature industrial furnaces • Suitable for petrochemical processing units, steam reformers, and chemical heaters handling oxidizing or carburizing gases • Ideal for high-heat metallurgical and cement kiln systems requiring thermal fatigue and scale resistance Features • Excellent high-temperature oxidation resistance – High chromium and silicon content forms a stable protective scale layer • Enhanced anti-scaling performance – Withstands prolonged exposure to oxidizing environments up to 1150°C • Outer bend protection – Shields the most exposed section of U-bend tubes from erosion, slag, and thermal impact • Precision fitment – Custom-made to match tube radius and diameter for secure, rattle-free installation • Easy to install – Secured by clamps, stainless steel bands, or tack welding without disassembling the system • Long operational lifespan – Reduces tube wear and replacement frequency in aggressive thermal service conditions Applications • power generation – Used on U-bend outer arcs in superheaters and reheaters for oxidation and slag protection • petrochemical plants – Shields tube bends in reformers and high-temperature heaters exposed to process gas erosion • waste heat recovery boilers – Installed in WHRBs and HRSGs operating under fluctuating temperatures and gas flow • cement and metallurgy industries – Protects curved tubes and heat exchanger bends exposed to high-temperature dust and gas streams • furnace and incineration systems – Applied to outer arcs in radiant coils subjected to direct flame and extreme heat Conclusion The 1Cr25Ni20Si2 U Type Outer Half Round Tube Shield by Ladhani Metal Corporation—manufacturer, supplier, and exporter—is a high-performance shielding component designed for the most demanding high-temperature industrial environments. With its superior oxidation resistance, scale protection, and thermal fatigue strength, it provides lasting protection to U-bend tubes in boilers, furnaces, and heat exchangers across the power, petrochemical, and metallurgical sectors. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered components designed to safeguard boiler and heat exchanger tubes from erosion, scaling, and thermal degradation. These shields are essential for industrial systems subjected to high-temperature flue gases, particulate abrasion, and corrosive atmospheres. The half-round design allows for simple installation over both straight and curved tube surfaces, enhancing tube longevity and reducing unplanned maintenance. SS 420 U Type Outer Half Round Tube Shield The SS 420 U Type Outer Half Round Tube Shield is manufactured from SS 420, a high-carbon martensitic stainless steel offering excellent hardness, strength, and moderate corrosion resistance. This outer U-type shield is designed specifically to protect the outer arc of U-bend tubes, where direct exposure to flame, slag, and abrasive gas streams accelerates wear. SS 420’s heat resistance and hard surface make it well-suited for shielding critical tube areas in high-wear, high-temperature applications. • Outer U Type Half Round Tube Shield – Provides robust coverage for the external curve of U-bend tubes, defending against mechanical erosion, scaling, and thermal fatigue. Ladhani Metal Corporation is a prominent manufacturer, supplier, and exporter of SS 420 U Type Outer Half Round Tube Shields, delivering reliable protection in harsh industrial operating environments. Chemical Composition of SS 420 – High-Carbon Martensitic Stainless Steel • Carbon (C): 0.15 – 0.40% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 12.0 – 14.0% • Iron (Fe): Balance Applications: Best suited for high-temperature, abrasive environments where mechanical strength and surface durability are critical, with moderate corrosion exposure. Uses • Protection of U-bend outer surfaces in superheaters, reheaters, and economizers in thermal power plants • Shielding external curves in gas heaters, exhaust systems, and flue ducts prone to slag or particulate erosion • Applied in return bends of waste heat recovery systems and HRSGs to guard against high-velocity gas wear • Ideal for industrial furnaces, incinerators, and heat exchangers operating in high-heat and abrasive zones • Suitable for applications where resistance to scaling, mechanical stress, and oxidation is required Features • High hardness and wear resistance – Martensitic steel structure offers excellent protection against abrasion and mechanical impact • Thermal durability – Performs well under high-temperature conditions with good resistance to scaling and thermal fatigue • Outer arc shielding – Specifically designed to guard the most exposed curvature of U-bend tubes from direct flame and gas stream contact • Precision-engineered – Fabricated to exact tube radius and diameter for secure, vibration-resistant installation • Simple installation – Easily mounted using clamps, tack welds, or stainless banding without system disassembly • Cost-efficient protection – Provides a durable solution with a balance of strength and corrosion resistance at an economical price Applications • thermal power stations – Used to shield outer curves of U-bend tubes from flame impingement and gas erosion • industrial boilers and furnaces – Protects return bends in high-heat, high-wear zones prone to slag accumulation and scale formation • waste heat recovery boilers – Installed in WHRB and HRSG systems to extend tube life under hot gas and particulate exposure • chemical and petrochemical industries – Suitable for heaters and exchangers where thermal stress and gas impact degrade surfaces • process heating systems – Applied in equipment handling high-velocity gas or steam that contributes to tube wear and surface damage Conclusion The SS 420 U Type Outer Half Round Tube Shield by Ladhani Metal Corporation—manufacturer, supplier, and exporter—is a dependable and rugged solution for protecting the outer arcs of U-bend tubes in boilers, heat exchangers, and high-temperature processing systems. Its high strength, excellent wear resistance, and thermal durability make it ideal for applications where erosion and mechanical damage are frequent. Customizable and easy to install, it supports long-term reliability and reduced operational downtime in demanding industrial conditions. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered components used to protect boiler and heat exchanger tubes from erosion, scaling, and high-temperature corrosion. These shields are widely applied in industrial systems exposed to thermal cycling, aggressive gases, and particulate flow. Their half-round shape allows for simple and secure installation over straight or curved tube surfaces, extending tube life and reducing maintenance needs. SS 310S U Type Outer Half Round Tube Shield The SS 310S U Type Outer Half Round Tube Shield is designed using SS 310S, a low-carbon austenitic stainless steel known for its excellent resistance to oxidation, high-temperature strength, and enhanced weldability. This outer U-type shield is specifically engineered to cover and protect the outer arc of U-bend tube sections in superheaters, reheaters, waste heat recovery systems, and high-temperature heat exchangers. With its high chromium and nickel content, SS 310S provides superior performance in oxidizing and carburizing environments while maintaining structural stability during prolonged thermal cycling. • Outer U Type Half Round Tube Shield – Shields the external curvature of U-bend tubes from slag deposition, hot gas erosion, scale formation, and high-temperature fatigue. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of SS 310S U Type Outer Half Round Tube Shields, offering high-performance solutions for critical thermal and process applications across industries. Chemical Composition of SS 310S – Low-Carbon Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.50% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Applications: Best suited for high-temperature, oxidizing, and carburizing environments where thermal stability, scale resistance, and corrosion protection are essential. Uses • Outer surface protection of U-bend tubes in superheaters and reheaters of thermal and industrial power plants • Shielding of return bends in petrochemical reformers, process heaters, and high-temperature exchangers • Applied to outer arcs in WHRBs and HRSGs subjected to thermal cycling, slag erosion, and hot flue gas exposure • Suitable for use in chemical and gas processing units handling oxidizing or acidic exhausts at elevated temperatures • Ideal for incinerator tubes, radiant coils, and furnace bends operating under continuous or cyclic heat conditions Features • Outstanding high-temperature strength – Performs effectively up to 1150°C with excellent resistance to scaling and oxidation • Enhanced weldability – Low carbon content minimizes the risk of sensitization and intergranular corrosion after welding • Outer U-bend coverage – Designed for targeted protection where erosion and thermal impact are most severe • Precision fitment – Manufactured to exact tube radius and diameter specifications for tight, vibration-free installation • Quick installation – Easily mounted using clamps, tack welds, or stainless steel banding without system disassembly • Long-term durability – Resistant to cracking, scaling, and corrosion under thermal fatigue, reducing maintenance and downtime Applications • thermal power plants – Installed on U-bend tube outer curves in superheaters and reheaters for oxidation and erosion protection • petrochemical plants – Used in reformers and cracking furnaces exposed to high-temperature and oxidizing environments • waste heat recovery systems – Protects return bends in WHRBs and HRSGs from hot gas flow, slag buildup, and scaling • chemical and gas processing – Shields bends in high-temperature exchangers and preheaters from corrosive and oxidizing media • furnaces and industrial incinerators – Applied to radiant tubes and burner bends subjected to direct flame and thermal cycling Conclusion The SS 310S U Type Outer Half Round Tube Shield by Ladhani Metal Corporation—manufacturer, supplier, and exporter—is a premium solution for protecting U-bend tube outer arcs in boilers and heat exchangers exposed to severe heat and gas flow conditions. With excellent oxidation resistance, low carbon content for improved weldability, and precision design for long-lasting performance, this shield enhances the lifespan and reliability of thermal systems across a wide range of industrial sectors. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation.