DIN 2632 titanium flanges PN 10 are precision-fabricated weld neck flanges produced according to the DIN 2632 standard. These flanges are designed for medium-pressure applications up to 10 bar (145 psi), offering excellent corrosion resistance, strength, and durability in highly demanding industrial environments. Manufactured from high-grade titanium alloys, they provide outstanding performance in aggressive chemical, marine, and high-temperature settings where conventional materials may fail. Ladhani Metal Corporation is a trusted global manufacturer and supplier of titanium flanges, known for its consistent quality and engineering precision. Each flange is rigorously tested to ensure compliance with applicable industrial standards and environmental regulations. Pressure Rating: • PN 10 (10 bar / 145 psi): Suitable for medium-pressure pipeline systems requiring superior corrosion resistance and mechanical integrity. Flange Type: • Weld Neck Flanges Designed with a long tapered hub to ensure strong pipe alignment and reduce stress concentration at the flange base. This design supports smooth flow transitions and enhances joint strength. • Flat Face (FF) Flanges Flat face design promotes even gasket compression and is preferred for use with cast components or soft gasket materials. Titanium Grades and Composition: Grade 2 (Commercially Pure Titanium) • Titanium (Ti): ≥ 99.2% • Oxygen (O): ≤ 0.25% • Carbon (C): ≤ 0.08% • Nitrogen (N): ≤ 0.03% • Iron (Fe): ≤ 0.30% • Hydrogen (H): ≤ 0.015% Applications: Known for excellent corrosion resistance and good mechanical properties, Grade 2 titanium is commonly used in chemical processing, water treatment, and marine applications where corrosion resistance is critical. Grade 5 (Ti-6Al-4V Alloy) • Titanium (Ti): Balance • Aluminum (Al): 5.5 – 6.75% • Vanadium (V): 3.5 – 4.5% • Iron (Fe): ≤ 0.30% • Oxygen (O): ≤ 0.20% • Carbon (C): ≤ 0.08% • Nitrogen (N): ≤ 0.05% Applications: Grade 5 offers superior strength and excellent corrosion resistance, widely used in aerospace, marine, and high-performance chemical environments requiring higher mechanical properties. Applications of DIN 2632 Titanium Flanges PN 10: • Chemical and Petrochemical Industry Used in piping systems transporting aggressive acids, alkalis, and oxidizing substances. • Marine and Offshore Ideal for seawater piping, shipbuilding, and offshore platforms requiring corrosion-resistant materials. • Water Treatment and Desalination Applied in high-purity water systems and desalination plants operating at moderate pressures. • Aerospace and Power Generation Used in environments exposed to high temperatures and corrosive atmospheres. Key Features: • Compliant with DIN 2632 standards • PN 10 pressure rating for medium-pressure service • Weld neck design for robust pipe-flange connection • Available in Grade 2 and Grade 5 titanium alloys for tailored performance • Flat face option for even gasket contact • Lightweight with high strength-to-weight ratio • Suitable for harsh chemical and marine environments • Custom sizes, finishes, and titanium grades available upon request Conclusion: DIN 2632 Titanium Flanges PN 10 from Ladhani Metal Corporation offer a reliable and durable solution for medium-pressure applications demanding exceptional corrosion resistance and mechanical performance. Made from premium titanium alloys such as Grade 2 and Grade 5, these flanges are ideal for chemical, marine, desalination, aerospace, and power generation sectors. For custom dimensions, technical consultation, or pricing information, contact Ladhani Metal Corporation today.

DIN 2632 stainless steel flanges PN 10 are precision-engineered weld neck flanges manufactured in accordance with the DIN 2632 standard. These flanges are designed for medium-pressure applications up to 10 bar (145 psi), providing strong, leak-proof connections in a wide range of industrial piping systems. Produced from high-quality stainless steel grades such as 304, 316, and 321, they deliver excellent corrosion resistance, mechanical strength, and durability even under moderately demanding environmental and operational conditions. Ladhani Metal Corporation is a globally recognized manufacturer and supplier of stainless steel flanges, committed to consistent quality and engineering accuracy. Each flange is carefully inspected to meet relevant industry standards and environmental regulations. Pressure Rating: • PN 10 (10 bar / 145 psi): Suitable for medium-pressure pipeline systems requiring robust joint integrity and corrosion resistance. Flange Type: • Weld Neck Flanges Designed with a long tapered hub to provide secure pipe alignment and minimize stress concentrations at the flange base. This ensures smooth flow transitions and reduces turbulence. • Flat Face (FF) Flanges Flat face design facilitates even gasket compression and is ideal for systems using cast components or soft gasket materials. Stainless Steel Grades and Full Composition: Stainless Steel 304 • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 10.5% • Carbon (C): ≤ 0.08% (304), ≤ 0.03% (304L) • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Suitable for general-purpose medium-pressure systems including potable water lines, food-grade applications, and light chemical processing. Stainless Steel 316 • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% • Carbon (C): ≤ 0.08% (316), ≤ 0.03% (316L) • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Provides enhanced corrosion resistance for systems exposed to chlorinated water, cleaning chemicals, and mildly acidic environments. Common in pharmaceutical, marine, and chemical processing pipelines. Stainless Steel 321 • Chromium (Cr): 17.0 – 19.0% • Nickel (Ni): 9.0 – 12.0% • Titanium (Ti): ≥ 5 × C (typically 0.20 – 0.70%) • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Ideal for moderate temperature and corrosion environments, frequently used in exhaust systems, thermal processing, and hygienic food equipment. Applications of DIN 2632 Stainless Steel Flanges PN 10: • Water Supply and Treatment Used in potable water and wastewater systems requiring medium-pressure handling. • Food and Beverage Industry Suitable for hygienic piping systems that operate at moderate pressures and require corrosion resistance. • Chemical Distribution Commonly used in pipelines carrying diluted or mildly aggressive chemicals. • HVAC and Ventilation Applied in duct flanges and connections for air handling and medium-pressure ventilation systems. Key Features: • Manufactured as per DIN 2632 standards • PN 10 pressure rating for medium-pressure service • Weld neck design enhances pipe-flange joint strength • Available in stainless steel grades 304, 304L, 316, 316L, and 321 • Resistant to corrosion with long service life under mechanical and environmental stresses • Suitable for food-grade, chemical, water, and HVAC applications • Custom sizes, finishes, and material grades available on request Conclusion: DIN 2632 Stainless Steel Flanges PN 10 from Ladhani Metal Corporation are engineered to meet the demands of medium-pressure industrial applications where reliability, corrosion resistance, and durability are critical. Manufactured from premium stainless steel materials, these weld neck flanges provide an economical and dependable solution across sectors such as water treatment, food processing, chemical distribution, and HVAC systems. For custom requirements, technical support, or pricing information, contact Ladhani Metal Corporation today

DIN 2576 Super Duplex Flanges PN 10 are high-performance, slip-on flanges manufactured from super duplex stainless steel, designed for piping systems operating under low to medium pressures. Produced in accordance with the DIN 2576 standard, these flanges offer exceptional mechanical strength combined with superior corrosion resistance, making them ideal for highly aggressive and chloride-laden environments. The slip-on design facilitates easy placement over the pipe and enables secure welding, ensuring precise alignment and a reliable seal across various industrial applications. Ladhani Metal Corporation is a trusted manufacturer and global supplier of super duplex steel flanges, providing products that meet stringent international standards in terms of dimensions, metallurgy, and performance. DIN 2576 super duplex flanges are especially valued in industries where resistance to pitting, crevice corrosion, and stress corrosion cracking is critical, including marine, chemical, and wastewater systems. Pressure Rating: • PN 10 (10 bar / 145 psi): Designed for moderate-pressure systems demanding long-term durability in corrosive environments. Flange Types: • Slip-On Flanges These flanges slide over the pipe and are welded on both sides, offering ease of installation and secure mechanical performance. • Flat Face (FF) Flanges Designed for use with flat gaskets and mating surfaces, these flanges are ideal for applications involving non-metallic or cast components. Super Duplex Stainless Steel Grades and Composition: Super Duplex 2507 (UNS S32750) Composition: • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 6.0 – 8.0% • Molybdenum (Mo): 3.0 – 5.0% • Nitrogen (N): 0.24 – 0.32% • Iron (Fe): Balance Applications: Super Duplex 2507 delivers superior yield strength and corrosion resistance, particularly in extreme environments. It is commonly used in subsea equipment, chemical containment, high-pressure systems, and offshore platforms exposed to seawater and chlorides. Applications of DIN 2576 Super Duplex Flanges: • Offshore and Marine Engineering Well-suited for seawater cooling systems, risers, and structural elements exposed to marine conditions. • Chemical and Petrochemical Industries Ideal for conveying highly corrosive fluids, acids, and chlorides in reactors and pipelines. • Water Treatment and Desalination Applied in reverse osmosis systems, brine piping, and high-salinity water circuits requiring enhanced corrosion resistance. • Pulp and Paper Industry Offers protection against aggressive bleaching agents and chemical fluids under pressurized conditions. • Oil and Gas Used in critical systems like separators, manifolds, and sour gas applications. • Structural and Pressure Vessel Fabrication Preferred for tanks and pressure vessels operating under corrosive and mechanical stress. Key Features: • Fully compliant with DIN 2576 standard specifications • PN 10 pressure rating for use in moderate-pressure applications • Superior resistance to chloride-induced pitting, crevice corrosion, and stress corrosion cracking • High mechanical strength reduces material thickness and overall system weight • Manufactured using Super Duplex 2507 and other super duplex alloys • Slip-on design ensures straightforward alignment and welding • Flat face variants suitable for a wide range of gaskets and connection types • Widely used across marine, chemical, oil and gas, and water treatment sectors • Custom sizes, face configurations, and finishes available on request Conclusion: DIN 2576 Super Duplex Flanges PN 10 by Ladhani Metal Corporation offer exceptional strength and corrosion resistance for highly demanding industrial environments. Available in Super Duplex 2507 and other super duplex grades, these flanges ensure reliable performance in systems facing high salinity, pressure, and temperature. For technical guidance, grade selection, or customized project solutions, reach out to Ladhani Metal Corporation today.

DIN 2633 super duplex steel flanges PN 16 are high-performance weld neck flanges manufactured in accordance with the DIN 2633 standard. Engineered for medium-pressure piping systems with a pressure rating of up to 16 bar (232 psi), these flanges are made from super duplex stainless steels, which offer a superior combination of high mechanical strength and outstanding corrosion resistance. They are specifically designed for critical applications in aggressive environments where standard stainless or duplex steels may not provide sufficient durability. Ladhani Metal Corporation is a globally recognized manufacturer and supplier of super duplex steel flanges, known for precision manufacturing, strict quality control, and compliance with international material and dimensional standards. Each flange is tested for performance, safety, and resistance to harsh operating conditions. Pressure Rating: • PN 16 (16 bar / 232 psi): Suitable for systems requiring secure, corrosion-resistant, and high-strength connections under moderate pressure. Flange Type: • Weld Neck Flanges Featuring a long tapered hub, these flanges offer optimal stress distribution, reduce turbulence at the joint, and ensure reliable pipe alignment in high-stress environments. • Flat Face (FF) Flanges Designed for uniform gasket compression, particularly effective when used with soft gaskets or cast iron mating components. Super Duplex Steel Grades and Full Composition: Super Duplex 2507 (UNS S32750) • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 6.0 – 8.0% • Molybdenum (Mo): 3.0 – 5.0% • Nitrogen (N): 0.24 – 0.32% • Manganese (Mn): ≤ 1.2% • Silicon (Si): ≤ 0.8% • Carbon (C): ≤ 0.03% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.02% • Iron (Fe): Balance Applications: Ideal for offshore platforms, subsea systems, desalination plants, chemical process systems, and high-chloride environments requiring superior corrosion and pitting resistance. Super Duplex S32760 • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 6.0 – 8.0% • Molybdenum (Mo): 3.0 – 4.0% • Tungsten (W): 0.5 – 1.0% • Copper (Cu): 0.5 – 1.0% • Nitrogen (N): 0.2 – 0.3% • Carbon (C): ≤ 0.03% • Iron (Fe): Balance Applications: Commonly used in seawater systems, heat exchangers, fire-fighting systems, and oil & gas equipment due to excellent resistance to erosion, stress corrosion cracking, and fatigue. Applications of DIN 2633 Super Duplex Steel Flanges PN 16: • Offshore Oil and Gas Platforms Resists chloride-induced corrosion and high mechanical loads in topside and subsea installations. • Desalination and Marine Systems Performs well in high-salinity environments where other alloys may suffer from pitting or crevice corrosion. • Chemical and Petrochemical Plants Suitable for handling strong acids, caustic solutions, and oxidizing environments at elevated temperatures and pressures. • Fire Protection and Water Injection Systems Ensures reliability and corrosion resistance in safety-critical and high-pressure fluid delivery systems. • Pulp and Paper Industry Used in bleach plant systems and recovery boilers where exposure to corrosive agents is routine. Key Features: • Manufactured in compliance with DIN 2633 standards • PN 16 pressure rating for medium-pressure service • Weld neck design ensures secure, vibration-resistant connections • Available in high-strength super duplex grades S32750 and S32760 • Excellent resistance to pitting, crevice corrosion, and stress corrosion cracking • High mechanical strength and fatigue resistance • Custom sizes, coatings, and pressure classes available upon request Conclusion: DIN 2633 super duplex steel flanges PN 16 from Ladhani Metal Corporation are designed to meet the most demanding operational requirements in highly corrosive and high-pressure environments. With unmatched strength and corrosion resistance, these flanges are ideal for offshore, marine, chemical, and industrial applications. For technical specifications, custom designs, or pricing information, contact Ladhani Metal Corporation today.

DIN 2633 Monel flanges PN 16 are precision-engineered weld neck flanges manufactured in accordance with the DIN 2633 standard. Designed for pipeline systems operating at pressures up to 16 bar (232 psi), these flanges provide exceptional resistance to corrosive environments, including seawater, acids, and alkalis. Manufactured from high-performance Monel alloys such as Monel 400 and Monel K500, they combine outstanding mechanical strength with excellent corrosion resistance, making them suitable for demanding industrial and marine applications. Ladhani Metal Corporation is a trusted global manufacturer and supplier of Monel flanges, known for superior material quality, dimensional accuracy, and strict compliance with international standards. Each flange undergoes rigorous quality checks and testing to ensure consistent performance in critical service conditions. Pressure Rating: • PN 16 (16 bar / 232 psi): Suitable for medium-pressure systems requiring corrosion resistance and structural reliability. Flange Type: • Weld Neck Flanges Designed with a long tapered hub to ensure smooth flow transitions, proper pipe alignment, and minimized stress concentration for high-integrity connections. • Flat Face (FF) Flanges Provides a uniform sealing surface ideal for systems with soft gasket materials or cast mating components, ensuring optimal gasket compression. Monel Grades and Full Composition: Monel 400 • Nickel (Ni): ≥ 63.0% • Copper (Cu): 28.0 – 34.0% • Iron (Fe): ≤ 2.5% • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 0.5% • Carbon (C): ≤ 0.3% Applications: Widely used in marine engineering, chemical processing, pump and valve components, and environments exposed to hydrofluoric and sulfuric acids. Monel K500 • Nickel (Ni): ≥ 63.0% • Copper (Cu): 27.0 – 33.0% • Aluminum (Al): 2.3 – 3.15% • Titanium (Ti): 0.35 – 0.85% • Iron (Fe): ≤ 2.0% • Carbon (C): ≤ 0.25% Applications: Suitable for high-strength applications in marine, oil and gas, and sour gas service environments. Offers improved mechanical properties over Monel 400 while retaining excellent corrosion resistance. Applications of DIN 2633 Monel Flanges PN 16: • Marine and Offshore Systems Ideal for saltwater piping, desalination systems, and submerged components due to excellent resistance to chloride stress corrosion. • Chemical Processing Industries Used in systems handling strong acids, alkalis, and organic solvents, especially hydrofluoric acid. • Oil and Gas Exploration Resistant to sour gas environments, high pressures, and corrosive drilling fluids. • Heat Exchangers and Condensers Monel flanges are preferred for their stability under fluctuating thermal loads and corrosive fluids. • Power Generation Used in cooling water and fuel handling systems where reliability under stress and corrosion is essential. Key Features: • Manufactured to DIN 2633 specifications • PN 16 rating for medium-pressure pipelines • Weld neck design for stress-distributed, leak-proof connections • Available in Monel 400 and K500 grades for tailored performance • Excellent resistance to corrosion in marine, acidic, and alkaline environments • High tensile strength and resistance to mechanical fatigue • Custom sizes, pressure classes, and finishes available on request Conclusion: DIN 2633 Monel Flanges PN 16 from Ladhani Metal Corporation offer robust performance in highly corrosive and pressure-sensitive applications. With superior resistance to seawater, acids, and harsh industrial chemicals, these flanges are engineered for longevity and strength in marine, chemical, and oil and gas systems. For custom configurations, technical advice, or pricing details, contact Ladhani Metal Corporation today.

DIN 2633 titanium flanges PN 16 are precision-engineered weld neck flanges manufactured in accordance with the DIN 2633 standard. These flanges are designed for medium to high-pressure applications up to 16 bar (232 psi), delivering strong, lightweight, and corrosion-resistant connections in highly demanding pipeline environments. Constructed from premium-grade titanium alloys such as Grade 2 and Grade 5, they offer unmatched corrosion resistance, low density, and excellent mechanical properties, making them ideal for aggressive and weight-sensitive industrial applications. Ladhani Metal Corporation is a globally recognized manufacturer and supplier of titanium flanges, known for its technical expertise, product reliability, and adherence to stringent international specifications. Each flange undergoes meticulous quality checks to meet all applicable safety and performance standards. Pressure Rating: • PN 16 (16 bar / 232 psi): Designed for pipeline systems requiring secure, leak-free connections and outstanding corrosion protection under moderate pressure conditions. Flange Type: • Weld Neck Flanges Designed with an extended tapered hub to ensure superior structural support and reduce localized stress. Ideal for critical piping systems where fatigue resistance is essential. • Flat Face (FF) Flanges Provides an even sealing surface for use with softer gaskets or systems involving cast components, ensuring leak-proof performance and consistent compression. Titanium Grades and Full Composition: Titanium Grade 2 • Titanium (Ti): ≥ 98.8% • Iron (Fe): ≤ 0.30% • Oxygen (O): ≤ 0.25% • Carbon (C): ≤ 0.08% • Nitrogen (N): ≤ 0.03% • Hydrogen (H): ≤ 0.015% Applications: Preferred in desalination, chemical processing, marine, and medical applications due to its excellent corrosion resistance and biocompatibility. Titanium Grade 5 (Ti-6Al-4V) • Titanium (Ti): Balance • Aluminum (Al): 5.5 – 6.75% • Vanadium (V): 3.5 – 4.5% • Iron (Fe): ≤ 0.40% • Oxygen (O): ≤ 0.20% • Carbon (C): ≤ 0.08% • Nitrogen (N): ≤ 0.05% • Hydrogen (H): ≤ 0.015% Applications: Commonly used in aerospace, offshore, automotive, and industrial systems requiring high strength-to-weight ratio, fatigue resistance, and temperature stability. Applications of DIN 2633 Titanium Flanges PN 16: • Desalination Plants Highly resistant to seawater and chlorides, suitable for intake and discharge piping. • Chemical and Pharmaceutical Industries Used in handling reactive or highly corrosive media where stainless steel may fail. • Aerospace and Defense Ideal for weight-sensitive applications requiring structural integrity and resistance to atmospheric conditions. • Oil and Gas Reliable in offshore platforms and downhole equipment exposed to saltwater and high pressures. • Medical Equipment Manufacturing Biocompatible properties allow safe usage in hygienic and sterile processing systems. Key Features: • Precision manufactured to DIN 2633 specifications • PN 16 pressure rating for medium to high-pressure performance • Weld neck flange design ensures enhanced mechanical stability • Available in corrosion-resistant titanium grades 2 and 5 • Lightweight construction reduces overall system load • High resistance to acids, chlorides, and extreme environments • Custom dimensions, pressure classes, and finishes available on request Conclusion: DIN 2633 Titanium Flanges PN 16 from Ladhani Metal Corporation provide a high-performance solution for systems that require excellent corrosion resistance, mechanical strength, and reduced weight. With superior manufacturing precision and quality assurance, these flanges are suited for challenging environments in marine, aerospace, chemical, and medical sectors. For custom specifications, detailed technical assistance, or pricing inquiries, contact Ladhani Metal Corporation today.

DIN 2632 Inconel flanges PN 10 are precision-engineered weld neck flanges manufactured in accordance with the DIN 2632 standard. Designed for medium-pressure applications up to 10 bar (145 psi), these flanges offer exceptional resistance to high temperatures, oxidation, and aggressive chemical environments. Produced using high-performance Inconel alloys, they ensure reliable operation in highly corrosive and thermally demanding industrial systems. Ladhani Metal Corporation is a globally recognized manufacturer and supplier of Inconel flanges, known for engineering excellence and stringent quality control. Each flange undergoes rigorous testing to meet relevant industrial specifications and environmental safety standards. Pressure Rating: • PN 10 (10 bar / 145 psi): Suitable for medium-pressure pipeline systems requiring superior corrosion and temperature resistance. Flange Type: • Weld Neck Flanges Engineered with a long tapered hub to ensure accurate pipe alignment and minimize stress concentration at the flange base. This design allows smoother fluid flow and reinforces joint strength. • Flat Face (FF) Flanges Flat face configuration ensures even gasket compression, especially suited for systems using soft gaskets or mating with cast components. Inconel Grades and Composition: Inconel 600 • Nickel (Ni): 72.0% minimum • Chromium (Cr): 14.0–17.0% • Iron (Fe): 6.0–10.0% • Carbon (C): ≤ 0.15% • Manganese (Mn): ≤ 1.0% • Silicon (Si): ≤ 0.5% Applications: Inconel 600 offers excellent resistance to high-temperature oxidation and corrosion. Commonly used in chemical processing, food industry heat exchangers, and marine exhaust systems. Inconel 625 • Nickel (Ni): Balance • Chromium (Cr): 20.0–23.0% • Molybdenum (Mo): 8.0–10.0% • Niobium (Nb): 3.15–4.15% • Iron (Fe): ≤ 5.0% • Carbon (C): ≤ 0.10% • Manganese (Mn): ≤ 0.50% • Silicon (Si): ≤ 0.50% Applications: Inconel 625 is known for its outstanding fatigue strength and resistance to pitting, crevice corrosion, and stress corrosion cracking. It is widely used in marine, chemical, aerospace, and nuclear sectors. Inconel 718 • Nickel (Ni): 50–55% • Chromium (Cr): 17–21% • Iron (Fe): Balance • Niobium (Nb): 4.75–5.5% • Molybdenum (Mo): 2.8–3.3% • Titanium (Ti): 0.65–1.15% • Aluminum (Al): 0.2–0.8% • Cobalt (Co): ≤ 1.0% • Carbon (C): ≤ 0.08% Applications: Inconel 718 offers exceptional tensile, fatigue, and creep resistance at temperatures up to 700°C. It is extensively used in aerospace engines, gas turbines, nuclear reactors, and high-performance industrial equipment where superior mechanical strength and corrosion resistance are required. Applications of DIN 2632 Inconel Flanges PN 10: • Chemical and Petrochemical Industry Ideal for systems carrying corrosive chemicals, acids, and oxidizing agents at elevated temperatures. • Marine and Offshore Used in saltwater piping, offshore platforms, and naval systems requiring materials with high corrosion and heat resistance. • Power Generation Suitable for high-temperature applications in power plants, heat exchangers, and turbine systems. • Aerospace and Defense Applied in jet engine components, space propulsion systems, and structural parts subjected to extreme pressure and heat. Key Features: • Manufactured to DIN 2632 specifications • PN 10 pressure rating for medium-pressure systems • Weld neck design for superior mechanical integrity • Available in Inconel 600, 625, and 718 for application-specific performance • Flat face option for improved gasket compression • Excellent resistance to oxidation, corrosion, and high-temperature stress • Suitable for critical applications in chemical, marine, aerospace, and energy sectors • Custom sizes, finishes, and alloys available upon request Conclusion: DIN 2632 Inconel Flanges PN 10 from Ladhani Metal Corporation deliver unmatched reliability and durability in medium-pressure environments where heat and corrosion are persistent challenges. With a selection of Inconel grades including 600, 625, and 718, these flanges are ideal for use in chemical processing, marine engineering, power generation, and aerospace industries. For customized solutions, technical guidance, or pricing, contact Ladhani Metal Corporation today.

DIN 2627 Inconel flanges PN 400 are premium-grade blind flanges engineered for ultra-high-pressure applications requiring exceptional corrosion resistance, heat resistance, and mechanical strength. Manufactured in accordance with the DIN 2627 standard, these flanges are designed to seal off the ends of piping systems, especially in extreme environments involving high temperatures, aggressive chemicals, or seawater exposure. The PN 400 rating (400 bar / 5800 psi) ensures performance under intense pressure conditions. Produced using high-performance nickel-based alloys such as Inconel 600, Inconel 625, and Inconel 718, these flanges are used extensively in aerospace, chemical processing, offshore oil and gas, marine, and power generation industries. Ladhani Metal Corporation is a leading global manufacturer and exporter of Inconel flanges, supplying components that conform to international standards for material integrity, pressure containment, and corrosion resistance. Pressure Rating: • PN 400 (400 bar / 5800 psi): Suitable for high-pressure piping systems in critical applications where maximum sealing and durability are essential. Flange Type: • Blind Flanges Solid, non-bored flanges used to isolate piping systems or terminate flow. Ideal for pressure testing, maintenance, and future pipeline expansions. • Flat Face (FF) Flanges Designed with a flat sealing surface for use with full-face gaskets and flat mating components, ensuring even load distribution and effective sealing. Inconel Grades and Composition: Inconel 600 (UNS N06600) • Nickel (Ni): ≥ 72% • Chromium (Cr): 14 – 17% • Iron (Fe): 6 – 10% • Manganese (Mn): ≤ 1% • Silicon (Si): ≤ 0.5% • Carbon (C): ≤ 0.15% • Sulfur (S): ≤ 0.015% Applications: Excellent resistance to oxidation, carburization, and chloride-ion stress corrosion cracking. Used in furnace components, heat exchangers, and food processing equipment. Inconel 625 (UNS N06625) • Nickel (Ni): ≥ 58% • Chromium (Cr): 20 – 23% • Molybdenum (Mo): 8 – 10% • Niobium + Tantalum (Nb + Ta): 3.15 – 4.15% • Iron (Fe): ≤ 5% • Carbon (C): ≤ 0.10% • Manganese (Mn): ≤ 0.5% • Silicon (Si): ≤ 0.5% Applications: Outstanding corrosion and fatigue resistance in seawater and chemical environments. Common in marine, aerospace, and offshore industries. Inconel 718 (UNS N07718) • Nickel (Ni): 50 – 55% • Chromium (Cr): 17 – 21% • Iron (Fe): Balance • Niobium + Tantalum (Nb + Ta): 4.75 – 5.5% • Molybdenum (Mo): 2.8 – 3.3% • Titanium (Ti): 0.65 – 1.15% • Aluminum (Al): 0.2 – 0.8% Applications: High strength and oxidation resistance up to 700°C. Used in jet engines, gas turbines, and high-pressure valves. Applications of DIN 2627 Inconel Flanges PN 400: • Offshore Oil and Gas Platforms Withstands high-pressure, high-salinity, and corrosive environments in subsea pipelines and risers. • Chemical Processing Plants Ideal for systems handling oxidizers, acids, solvents, and reactive compounds at high temperatures and pressures. • Aerospace and Jet Propulsion Used in fuel systems, hydraulic lines, and turbine enclosures where extreme heat and stress are common. • Nuclear and Power Generation Suited for high-pressure reactor lines and heat exchanger systems exposed to radiation, heat, and corrosive media. • Desalination and Seawater Systems Highly resistant to chloride-induced pitting and crevice corrosion. • High-Temperature and Reactive Media Systems Perfect for isolating systems exposed to thermal cycling and chemical attack. Key Features: • Manufactured to DIN 2627 standards • Rated for PN 400 ultra-high-pressure systems • Blind flange design for sealing pipe ends or testing access • Flat face design for even gasket compression and sealing • Available in Inconel 600, 625, and 718 • Excellent resistance to oxidation, acids, chlorides, and high heat • High mechanical strength and fatigue resistance • Used in critical industries including aerospace, marine, oil and gas, and chemical processing • Custom sizes, alloys, pressure ratings, and surface finishes available on request Conclusion: DIN 2627 Inconel Flanges PN 400 from Ladhani Metal Corporation offer exceptional performance and reliability in the most demanding service conditions. Whether your system involves corrosive chemicals, high-pressure steam, or marine exposure, these blind flanges deliver secure sealing, longevity, and safety. Contact Ladhani Metal Corporation for material selection, technical support, or custom solutions tailored to your high-performance application.

DIN 2576 Carbon Steel Flanges PN 10 are slip-on type flanges manufactured in accordance with the DIN 2576 standard, suitable for piping systems operating under low to moderate pressures. Made from high-quality carbon steel, these flanges offer good mechanical strength and are cost-effective solutions for a wide range of industrial applications where corrosion resistance is not the primary concern. The slip-on design allows easy fitting over the pipe and facilitates welding on both the inner and outer edges, ensuring reliable and leak-proof connections. Ladhani Metal Corporation is a reputed manufacturer and global supplier of carbon steel flanges, delivering components that comply with international quality and dimensional standards. DIN 2576 carbon steel flanges are widely used in general-purpose piping systems across industries such as oil and gas, power generation, HVAC, water treatment, and process industries. Pressure Rating: • PN 10 (10 bar / 145 psi): Suitable for use in low to medium pressure systems with stable operational demands. Flange Types: • Slip-On Flanges These flanges slide over the pipe end and are welded on both sides, allowing for simple installation and strong mechanical joints. • Flat Face (FF) Flanges Designed to mate with flat gaskets and flat surfaces, suitable for systems involving cast iron or non-metallic components. Carbon Steel Grades and Composition: Common Grades: • ASTM A105 (Forged Carbon Steel) • ASTM A516 Grade 70 (Pressure Vessel Quality Steel) • IS 2062 (Structural Carbon Steel) Typical Composition (ASTM A105): • Carbon (C): 0.35% max • Manganese (Mn): 0.60 – 1.05% • Phosphorus (P): 0.035% max • Sulfur (S): 0.040% max • Silicon (Si): 0.10 – 0.35% Applications: DIN 2576 carbon steel flanges are preferred in systems where high strength is required and the risk of corrosion is minimal or controlled through external protection (e.g., coatings or linings). Common applications include: • Oil and Gas Transmission Used in pipelines and flowlines where moderate pressures are involved. • Power Plants Suitable for steam, water, and air systems in thermal and hydroelectric power stations. • Water Treatment and Distribution Employed in clean water and wastewater systems, including pumping stations and storage tanks. • HVAC Systems Utilized in heating, ventilation, and air conditioning ducting and piping. • Chemical and Petrochemical Applied in non-corrosive fluid handling and auxiliary systems. • Structural and Fabrication Works Used in non-pressure retaining structural supports and frames. Key Features: • Manufactured to DIN 2576 standards • PN 10 pressure rating for medium-duty applications • Cost-effective and mechanically strong • Available in a variety of carbon steel grades • Slip-on design offers ease of installation and alignment • Flat face design compatible with flat gaskets and soft materials • Ideal for industrial sectors with controlled or minimal corrosion environments • Custom drilling, dimensions, and surface treatments available Conclusion: DIN 2576 Carbon Steel Flanges PN 10 by Ladhani Metal Corporation offer a practical and economical solution for low to moderate pressure piping systems. With reliable performance, ease of installation, and availability in various carbon steel grades, these flanges are suited for a broad range of applications in power, water, oil and gas, and infrastructure industries. For detailed specifications, material compatibility, or project-based orders, contact Ladhani Metal Corporation today.