Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are robust, precision-fabricated protective sleeves designed to guard the outer surfaces of tubes in boilers, heat exchangers, incinerators, and high-temperature processing equipment. Engineered to extend the service life of tubes exposed to corrosive gases, abrasive particulates, and elevated temperatures, these shields provide a reliable barrier against mechanical and chemical degradation. The half-round design facilitates easy installation while ensuring a secure, form-fitting layer of defense. 1Cr13 Half Round Tube Shield The 1Cr13 Half Round Tube Shield is a semi-cylindrical component manufactured from martensitic stainless steel containing approximately 13% chromium. Classified under the 1Cr13 grade, this alloy delivers good corrosion resistance, excellent wear performance, and moderate strength at elevated temperatures. It is especially suited for thermal environments that are not extremely oxidizing or carburizing but where erosion and mechanical wear are a concern. With a higher hardness potential through heat treatment and moderate thermal resistance, 1Cr13 shields are ideal for applications involving flue gas exposure, soot-laden atmospheres, and temperature cycling. The shield’s half-round configuration is precision-engineered for optimal tube coverage and long-term durability. It offers a balance of strength, corrosion resistance, and cost-effectiveness, making it suitable for a wide range of industrial processes. Chemical Composition of 1Cr13 – Martensitic Stainless Steel • Carbon (C): 0.15 – 0.20% • Silicon (Si): ≤ 1.00% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Chromium (Cr): 12.0 – 14.0% • Nickel (Ni): ≤ 0.60% • Iron (Fe): Balance Uses • Boiler Tube Protection – Shields tube surfaces from flue gas erosion, ash particle abrasion, and soot buildup in economizers and waterwalls. • Heat Exchanger Tubes – Provides an extra layer of wear resistance in zones prone to mechanical stress and fluid turbulence. • Incinerator and Waste Heat Units – Guards tubes exposed to fluctuating temperatures, slag, and particulate deposits. • Cement Plant Piping – Protects tubing and ducts in kiln exhaust systems from abrasive dust and high flow velocity. • Air Preheaters and Recuperators – Enhances the durability of components subjected to temperature variations and corrosive gases. Features • Moderate Oxidation Resistance – Chromium content enables good performance in mildly oxidizing environments and intermittent exposure to high temperatures. • Wear and Abrasion Resistance – Martensitic structure offers high surface hardness and resistance to mechanical wear. • Heat Treatable – Can be hardened to increase durability and resistance to deformation. • Cost-Effective – Provides a lower-cost alternative to austenitic and superalloy shields for moderate service conditions. • High Dimensional Accuracy – Manufactured with tight tolerances to ensure secure fitment and uniform tube coverage. • Convenient Installation – Half-round shape enables quick mounting through welding or clamping techniques. • Versatile Finishing Options – Supplied with pickled or mechanically polished surfaces to improve corrosion resistance and adhesion. Applications • Power Generation – Used in economizer, preheater, and convection sections of boilers to prevent erosion and fouling. • Chemical and Fertilizer Plants – Protects exposed tube surfaces in systems with moderate chemical exposure. • Metallurgical Furnaces – Shields mechanical and flue components exposed to particulate movement and temperature cycling. • Pulp and Paper Industry – Used in recovery boilers and heat exchangers where corrosion resistance and mechanical strength are both required. • Petrochemical Plants – Applied in lower-temperature zones where scaling and erosion are primary concerns. Conclusion The 1Cr13 Half Round Tube Shield by Ladhani Metal Corporation provides an optimal solution for industrial tube protection in moderate temperature and corrosion environments. Its martensitic stainless steel composition ensures excellent wear resistance, good oxidation stability, and structural strength at a competitive cost. Designed for easy installation and reliable performance, these shields are ideal for various applications in power, process, and heat recovery systems. Custom-built to meet specific dimensions, material thicknesses, and finishing preferences, 1Cr13 tube shields offer dependable service life extension for critical heat transfer equipment. For technical specifications, pricing, or customization inquiries, please contact Ladhani Metal Corporation.

Product Name:Titanium anodizing jigs Material: Gr1, Gr2 Application: Electroplating, anodizing etc. Size: Customized Surface: Polished Material Gr2 Titanium Industries served- SPECIAL PROCESSING, Defense Types of Surfaces- Metal Surfaces Metal Finishing- Anodizing Types of Surface Treatment- Anodizing Design- Customized

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered components designed to protect boiler tubes, superheaters, and heat exchanger coils from erosion, scaling, high-temperature oxidation, and mechanical wear. These shields are widely used in thermal power plants, petrochemical systems, and process industries where tubes are exposed to harsh operating conditions such as high-velocity flue gases, slag, and thermal cycling. Their semi-cylindrical shape allows for easy installation over both straight and curved tube surfaces without system disassembly. SS 410 U Type Inner Half Round Tube Shield The SS 410 U Type Inner Half Round Tube Shield is manufactured from martensitic stainless steel grade 410, which offers good corrosion resistance, excellent wear resistance, and moderate high-temperature strength. The inner U-type design is specifically configured to cover the internal arc of U-bend tubes, an area especially prone to erosion caused by turbulence, thermal gradients, and high-velocity gas impingement. SS 410 provides a hard, durable barrier against mechanical and thermal stress in industrial heat transfer equipment. • Inner U Type Half Round Tube Shield – Protects the internal bend of U-bend tubes from erosion, slag buildup, and high-temperature wear. Ladhani Metal Corporation is a dependable manufacturer, supplier, and exporter of SS 410 U Type Inner Half Round Tube Shields, offering cost-effective and durable protection solutions for critical tube components in high-temperature service environments. Chemical Composition of SS 410 – Martensitic Stainless Steel • Carbon (C): 0.08 – 0.15% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 11.5 – 13.5% • Nickel (Ni): ≤ 0.75% • Iron (Fe): Balance Applications: Best suited for moderate to high-temperature environments where abrasion resistance, mechanical strength, and oxidation resistance are important. Uses • Inner arc shielding of U-bend tubes in power plant boilers and superheaters exposed to flue gas turbulence • Protection of return bends in WHRBs and HRSGs where scaling and erosion are common • Applied in curved tube sections in steam reformers, furnaces, and heat exchangers • Ideal for use in chemical, cement, and metallurgical plants with abrasive flue gas and slag exposure • Suitable for systems requiring enhanced wear resistance under cyclic thermal loading Features • Good high-temperature oxidation resistance – Performs well in oxidizing atmospheres up to 650°C • Inner bend protection – Focused coverage for the area most affected by turbulent gas flow and erosion • Wear resistance – Offers excellent surface hardness and mechanical strength for long-term use • Secure fit – Custom-manufactured to match the tube’s radius and diameter for effective shielding • Quick installation – Can be fixed using clamp-on, banding, or welding techniques depending on system requirements • Cost-effective performance – Provides a durable and affordable solution for erosion and heat protection Applications • thermal power plants – Shields inner U-bends in boiler and superheater sections from erosion and slag impact • waste heat recovery systems – Used in WHRBs and HRSGs to protect internal tube arcs from scale and corrosion • petrochemical facilities – Installed in curved tube coils and return bends exposed to acidic and abrasive gas streams • industrial furnaces and reformers – Suitable for inner arc coverage in high-temperature gas flow zones • cement and chemical plants – Defends against mechanical wear and heat stress in return tube bends Conclusion The SS 410 U Type Inner Half Round Tube Shield by Ladhani Metal Corporation – manufacturer, supplier, and exporter – is a durable and cost-efficient solution for shielding the inner arc of U-bend tubes in thermally and mechanically demanding environments. Its martensitic structure and wear-resistant properties make it a reliable choice for protecting tube surfaces from erosion, scaling, and heat-induced damage in power and process applications. For custom orders, technical support, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered components used to protect boiler and heat exchanger tubes from erosion, scaling, and high-temperature corrosion. These shields are widely applied in industrial systems exposed to thermal cycling, aggressive gases, and particulate flow. Their half-round shape allows for simple and secure installation over straight or curved tube surfaces, extending tube life and reducing maintenance needs. SS 410 U Type Outer Half Round Tube Shield The SS 410 U Type Outer Half Round Tube Shield is made from SS 410, a hardenable martensitic stainless steel known for its excellent strength, toughness, and moderate corrosion resistance. This outer U-type configuration is designed to protect the external arc of U-bend tubes in heat exchangers, boilers, and reheaters where abrasive flue gases and mechanical wear are common. SS 410’s hardness and resistance to thermal fatigue make it suitable for shielding outer tube surfaces exposed to harsh industrial environments. • Outer U Type Half Round Tube Shield – Protects the outer curvature of U-bend tubes from erosion, scaling, and mechanical impact caused by high-velocity gas and slag deposits. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of SS 410 U Type Outer Half Round Tube Shields, offering durable solutions for power generation and high-temperature applications. Chemical Composition of SS 410 – Martensitic Stainless Steel • Carbon (C): 0.08 – 0.15% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 11.5 – 13.5% • Nickel (Ni): ≤ 0.75% • Iron (Fe): Balance Applications: Suitable for high-temperature environments with abrasive gas flow and mechanical stress, where moderate corrosion resistance is sufficient. Uses • Outer arc protection for U-bend tubes in boilers, superheaters, and reheaters in thermal power plants • Shields tube bends in economizers and waste heat recovery systems from flue gas erosion • Applied in return bends in gas processing heaters and exhaust systems subjected to particulate flow • Ideal for high-strength, mechanically demanding environments where wear resistance is critical • Used in utility boilers, process furnaces, and other industrial systems operating under moderate corrosion and high heat conditions Features • High mechanical strength – Martensitic structure provides excellent hardness and wear resistance for abrasive service conditions • Moderate corrosion resistance – Chromium content offers basic protection against oxidation and steam exposure • Outer bend coverage – Shields the most exposed and impact-prone arc of the U-bend tube • Precision fit – Custom-fabricated to match tube diameters and bend radii, ensuring tight, vibration-free installation • Easy to install – Mountable using stainless steel bands, clamps, or tack welds without dismantling the system • Cost-effective – Offers durable tube protection with high strength at a lower material cost compared to austenitic grades Applications • power generation – Protects outer curves of U-bend tubes in high-temperature zones of boilers and reheaters • petrochemical processing – Shields tube bends in process heaters and reformers from thermal and gas erosion • waste heat recovery – Applied in WHRBs and HRSGs to guard against slag impact and scale formation • industrial furnaces – Suitable for high-wear zones where heat and particulate flow cause surface degradation • general industry – Used in utility boilers and gas exhaust systems where mechanical protection is needed with moderate corrosion resistance Conclusion The SS 410 U Type Outer Half Round Tube Shield by Ladhani Metal Corporation—manufacturer, supplier, and exporter—is a reliable and economical solution for protecting U-bend tube outer surfaces in boilers, heat exchangers, and thermal process systems. With excellent mechanical strength, good thermal stability, and moderate corrosion resistance, it is ideal for industrial applications that demand abrasion resistance and long service life in high-temperature environments. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are purpose-built components designed to extend the life of boiler, heat exchanger, and process tubes by offering robust protection from erosion, scaling, and thermal impact. These shields are essential for maintaining system performance and reducing unscheduled downtime in industries that operate under demanding thermal and mechanical conditions. SS 420 Half Round Tube Shield The SS 420 Half Round Tube Shield is a semi-cylindrical protector fabricated from martensitic stainless steel grade 420. Known for its high hardness, wear resistance, and moderate corrosion resistance, SS 420 is ideally suited for applications where abrasion and mechanical stress are predominant concerns. The half-round configuration ensures a secure fit over existing tubes, creating a physical barrier against direct exposure to high-velocity gases, fly ash, and thermal shocks. Its ability to retain strength at elevated temperatures makes it suitable for use in utility boilers, air preheaters, and other high-wear process systems. Chemical Composition of SS 420 – Martensitic Stainless Steel • Carbon (C): 0.15 – 0.40% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 12.0 – 14.0% • Nickel (Ni): ≤ 0.75% • Iron (Fe): Balance Uses • Boiler Tube Protection – Provides abrasion resistance in flue gas paths, soot blower zones, and areas exposed to particulate erosion in industrial boilers. • Heat Exchanger Shielding – Minimizes mechanical damage caused by turbulent flow and particulate-laden fluids, preserving heat transfer efficiency. • Furnace Tube Guarding – Protects furnace and kiln tubes from thermal scale buildup and flame impingement in harsh operating zones. • Steam and Condensate Systems – Shields tubes from vibration, pressure cycling, and moderate steam-induced corrosion. • Ash and Gas Flow Zones – Ideal for protecting tubes in areas of fly ash impact or high-speed combustion gas flow in WTE and biomass plants. Features • High Surface Hardness – Excellent resistance to surface wear, impact, and mechanical abrasion due to its high carbon and martensitic structure. • Moderate Corrosion Resistance – Withstands oxidizing and mildly corrosive conditions up to 650°C, suitable for moderate industrial atmospheres. • Structural Integrity – Maintains strength under pressure and temperature cycling, offering long service life in mechanical protection roles. • Easy Installation – The half-round design enables fast application in the field with minimal disruption to tube layout or operation. • Finishing Options – Available in bright annealed, pickled, or passivated surfaces depending on operational requirements. • Custom Built – Offered in varied lengths, diameters, thicknesses, and attachment styles (clamp-on or weld-on) to match specific installations. Applications • Thermal and Biomass Power Stations – Used to protect boiler tubes from ash erosion and gas turbulence in high-velocity flue paths. • Cement and Steel Industries – Shields kiln and heat recovery tubes from particulate impact, slag, and high-temperature dust environments. • Waste-to-Energy Plants – Guards tubes in combustion chambers and economizers where gas stream erosion and soot buildup are persistent issues. • Oil Refineries – Applied in heat exchangers and preheater tubes exposed to abrasive flow or moderate corrosion risk. • Pulp and Paper Mills – Used in black liquor recovery boilers and steam generators handling fibrous or corrosive waste products. • Air Preheaters – Ideal for tubes located in dust-laden environments requiring protection against wear and gas abrasion. Conclusion The SS 420 Half Round Tube Shield from Ladhani Metal Corporation offers a high-performance, wear-resistant solution for tube protection in mechanically aggressive and thermally intensive environments. Its martensitic structure provides outstanding surface hardness, making it especially effective in soot blower zones, high-velocity ducts, and areas subject to abrasive particle flow. While not intended for severe chemical environments, SS 420 delivers exceptional value where mechanical durability is the top priority. With full customization options and precision manufacturing, Ladhani Metal Corporation ensures durable, reliable shielding products tailored to your plant’s exact operational needs. For technical consultations, order customization, or to request a quotation, please contact Ladhani Metal Corporation.

DIN 2576 Carbon Steel Flanges PN 10 are slip-on type flanges manufactured in accordance with the DIN 2576 standard, suitable for piping systems operating under low to moderate pressures. Made from high-quality carbon steel, these flanges offer good mechanical strength and are cost-effective solutions for a wide range of industrial applications where corrosion resistance is not the primary concern. The slip-on design allows easy fitting over the pipe and facilitates welding on both the inner and outer edges, ensuring reliable and leak-proof connections. Ladhani Metal Corporation is a reputed manufacturer and global supplier of carbon steel flanges, delivering components that comply with international quality and dimensional standards. DIN 2576 carbon steel flanges are widely used in general-purpose piping systems across industries such as oil and gas, power generation, HVAC, water treatment, and process industries. Pressure Rating: • PN 10 (10 bar / 145 psi): Suitable for use in low to medium pressure systems with stable operational demands. Flange Types: • Slip-On Flanges These flanges slide over the pipe end and are welded on both sides, allowing for simple installation and strong mechanical joints. • Flat Face (FF) Flanges Designed to mate with flat gaskets and flat surfaces, suitable for systems involving cast iron or non-metallic components. Carbon Steel Grades and Composition: Common Grades: • ASTM A105 (Forged Carbon Steel) • ASTM A516 Grade 70 (Pressure Vessel Quality Steel) • IS 2062 (Structural Carbon Steel) Typical Composition (ASTM A105): • Carbon (C): 0.35% max • Manganese (Mn): 0.60 – 1.05% • Phosphorus (P): 0.035% max • Sulfur (S): 0.040% max • Silicon (Si): 0.10 – 0.35% Applications: DIN 2576 carbon steel flanges are preferred in systems where high strength is required and the risk of corrosion is minimal or controlled through external protection (e.g., coatings or linings). Common applications include: • Oil and Gas Transmission Used in pipelines and flowlines where moderate pressures are involved. • Power Plants Suitable for steam, water, and air systems in thermal and hydroelectric power stations. • Water Treatment and Distribution Employed in clean water and wastewater systems, including pumping stations and storage tanks. • HVAC Systems Utilized in heating, ventilation, and air conditioning ducting and piping. • Chemical and Petrochemical Applied in non-corrosive fluid handling and auxiliary systems. • Structural and Fabrication Works Used in non-pressure retaining structural supports and frames. Key Features: • Manufactured to DIN 2576 standards • PN 10 pressure rating for medium-duty applications • Cost-effective and mechanically strong • Available in a variety of carbon steel grades • Slip-on design offers ease of installation and alignment • Flat face design compatible with flat gaskets and soft materials • Ideal for industrial sectors with controlled or minimal corrosion environments • Custom drilling, dimensions, and surface treatments available Conclusion: DIN 2576 Carbon Steel Flanges PN 10 by Ladhani Metal Corporation offer a practical and economical solution for low to moderate pressure piping systems. With reliable performance, ease of installation, and availability in various carbon steel grades, these flanges are suited for a broad range of applications in power, water, oil and gas, and infrastructure industries. For detailed specifications, material compatibility, or project-based orders, contact Ladhani Metal Corporation today.

DIN 2576 Titanium Flanges PN 10 are premium-quality, slip-on flanges crafted from corrosion-resistant titanium alloys, designed for use in low to medium-pressure piping systems. Produced according to the DIN 2576 standard, these flanges offer exceptional corrosion resistance, lightweight performance, and structural reliability, especially in chemically aggressive and marine environments. The slip-on design allows the flange to slide over the pipe and be welded into place, ensuring proper alignment and mechanical strength across diverse industrial sectors. Ladhani Metal Corporation is a globally recognized manufacturer and exporter of titanium flanges, supplying components that meet stringent international standards for quality, dimension, and performance. DIN 2576 titanium flanges are well-suited for demanding applications where resistance to chlorides, seawater, and strong oxidizers is critical. Pressure Rating: • PN 10 (10 bar / 145 psi): Designed for systems operating under low to moderate pressure, ensuring safe and long-term functionality in fluid, gas, and chemical transport systems. Flange Types: • Slip-On Flanges Designed to slip over the pipe and be welded on both the inside and outside, these flanges provide ease of installation and dependable structural support. • Flat Face (FF) Flanges Used with flat gaskets and flat mating surfaces to ensure proper load distribution and effective sealing, especially when paired with non-metallic or cast components. Titanium Grades and Composition: Titanium Grade 2 (UNS R50400) Composition: • Titanium (Ti): ≥ 98.5% • Iron (Fe), Oxygen (O), Carbon (C), Nitrogen (N), Hydrogen (H): Trace amounts Applications: Commercially pure titanium Grade 2 is known for its excellent corrosion resistance, formability, and weldability. It is widely used in chemical processing, desalination plants, and medical equipment. Titanium Grade 5 (Ti-6Al-4V, UNS R56400) Composition: • Titanium (Ti): Balance • Aluminum (Al): 5.5 – 6.75% • Vanadium (V): 3.5 – 4.5% Applications: Grade 5 titanium offers superior strength and corrosion resistance, making it ideal for high-performance applications such as aerospace systems, offshore platforms, and high-stress piping environments. Applications of DIN 2576 Titanium Flanges: • Chemical and Petrochemical Industries Ideal for systems handling corrosive fluids, acids, and solvents, especially in chlorinated or oxidizing environments. • Desalination and Water Treatment Extensively used in seawater pipelines, brine systems, and high-purity water processing due to titanium’s resistance to chloride attack. • Marine and Offshore Engineering Suitable for shipbuilding, underwater pipelines, and ballast systems where corrosion from saltwater is a major concern. • Aerospace and Defense Used in lightweight, high-strength piping assemblies and fuel systems exposed to extreme environments. • Medical and Pharmaceutical Equipment Preferred for its biocompatibility and corrosion resistance in sterile and hygienic fluid handling systems. • High-Temperature and Reactive Environments Titanium Grade 5 flanges are used in systems exposed to thermal cycling, strong oxidizers, or aggressive chemical media. Key Features: • Manufactured in accordance with DIN 2576 standard • PN 10 pressure rating for moderate pressure systems • Exceptional resistance to corrosion, especially from seawater and chemicals • Available in Titanium Grade 2 and Grade 5 • Slip-on design for easy installation and accurate alignment • Flat face options compatible with specific gaskets and joint types • Lightweight yet mechanically strong • Suitable for marine, aerospace, medical, and chemical processing industries • Custom sizes, face types, and surface finishes available upon request Conclusion: DIN 2576 Titanium Flanges PN 10 from Ladhani Metal Corporation offer an ideal solution for industries requiring high corrosion resistance and durability in low to medium-pressure systems. With options in commercially pure and alloyed titanium, these flanges are engineered to meet the most demanding applications. For technical consultation, custom designs, or ordering information, contact Ladhani Metal Corporation today.

DIN 2568 Super Duplex Steel Flanges PN 64 are premium-grade threaded flanges manufactured from high-performance super duplex stainless steel, designed to withstand extreme mechanical loads and highly corrosive environments. In compliance with DIN 2568 standards, these flanges offer exceptional strength, superior resistance to pitting and crevice corrosion, and excellent performance under high pressure and temperature variations, making them ideal for demanding applications in offshore, petrochemical, marine, and desalination industries. Ladhani Metal Corporation is a renowned manufacturer and exporter of super duplex flanges, supplying components that meet stringent global standards for quality, precision, and reliability. The threaded design ensures weld-free, easy installation and removal, making these flanges highly suitable for systems requiring quick assembly and periodic maintenance. Pressure Rating: • PN 64 (64 bar / 928 psi): Engineered for high-pressure and aggressive service conditions where material integrity and corrosion resistance are critical. Flange Types: • Threaded (Screwed) Flanges Facilitates rapid, weld-free assembly and disassembly, particularly in maintenance-intensive systems. • Raised Face (RF) Flanges Improves sealing effectiveness in high-pressure applications by concentrating gasket compression. • Flat Face (FF) Flanges Ideal for systems with flat mating surfaces, especially where non-metallic or brittle materials are used. • Forged Threaded Flanges Manufactured for enhanced strength, dimensional accuracy, and resilience in corrosive environments. • Custom-Machined Flanges Available in various sizes, sealing types, and super duplex grades, tailored to meet specific project requirements. Available Super Duplex Grades and Composition: 1. Super Duplex Steel Composition: • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 6.0 – 8.0% • Molybdenum (Mo): 3.0 – 4.0% • Tungsten (W): 0.5 – 1.0% • Nitrogen (N): 0.20 – 0.30% • Carbon (C): ≤ 0.030% Applications: Used in highly corrosive environments such as seawater systems, desalination plants, and chemical reactors where maximum corrosion protection and mechanical strength are required. Applications of DIN 2568 Super Duplex Flanges: • Offshore and Subsea Engineering: Designed for long-term performance in saltwater, high-pressure, and submerged environments. • Oil and Gas Sector: Used in sour service, high-pressure pipelines, separators, and riser systems. • Chemical and Petrochemical Plants: Resistant to aggressive media such as chlorides, acids, and organic solvents. • Desalination and Water Treatment: Ideal for use in reverse osmosis systems, brine handling, and filtration modules. • Power Generation and Marine Infrastructure: Installed in heat exchangers, cooling systems, and seawater intake structures. Key Features: • Manufactured according to DIN 2568 specifications • Rated for PN 64 high-pressure service • Outstanding resistance to corrosion, pitting, and chloride-induced stress cracking • High yield strength and fatigue resistance • Threaded connection allows for easy, non-permanent assembly • Supplied with test certificates, MTCs, and full material traceability • Surface finish and machining available as per customer requirement Conclusion: DIN 2568 Super Duplex Flanges PN 64 from Ladhani Metal Corporation represent the ideal solution for high-pressure, highly corrosive, and mechanically challenging environments. With exceptional durability, corrosion protection, and installation efficiency, these flanges are engineered for performance and reliability. For custom dimensions, technical support, or grade selection, contact Ladhani Metal Corporation today

Product Name:Titanium anodizing jigs Material: Gr1, Gr2 Application: Electroplating, anodizing etc. Size: Customized Surface: Polished Material Gr2 Titanium Industries served- SPECIAL PROCESSING, Defense Types of Surfaces- Metal Surfaces Metal Finishing- Anodizing Types of Surface Treatment- Anodizing Design- Customized