QUALITU STANDARD MATERIAL NO. OLD DESIGNATION DC03 DIN EN 10130 1.0347 St 13-03 The deep drawing grade DC03 is specified according to the standard DIN EN 10130, which focuses on cold-rolled flat products made of soft steels for cold forming. This standard defines the technical requirements and test methods for cold-rolled products used in various industrial applications, particularly where high demands are placed on surface quality and mechanical properties. DC03 is a low-carbon steel characterized by excellent cold formability. The chemical composition of DC03 is precisely defined to ensure that the material has the required mechanical properties. Typically, DC03 contains a maximum of 0.10% carbon, a maximum of 0.45% manganese and traces of phosphorus and sulphur. This small amount of alloying elements contributes to the good formability and weldability of the steel. The mechanical properties of DC03 are also clearly defined. The material has a yield strength of at least 140 MPa and a tensile strength of between 270 and 370 MPa. In addition, DC03 has an elongation at break of at least 34%, which underlines its excellent formability. These properties make DC03 particularly suitable for the production of complex components that require high precision and surface quality, such as body parts in the automotive industry or household appliances. The DIN EN 10130 standard also specifies the tolerances for dimensions, shape and surface finish. These tolerances are crucial to ensure consistently high product quality and to meet the requirements of end users. The surface of the cold-rolled flat products can be supplied in various qualities, from matt to glossy, to meet the specific requirements of different applications. The DIN EN 10152 standard specifies electrolytically galvanized, cold-rolled flat steel products for cold forming, including the deep-drawing grade DC03. This standard defines the requirements for the zinc coating and the basic mechanical properties of the base material. DC03, when electrolytically galvanized in accordance with DIN EN 10152, is given an additional corrosion protection layer of zinc. This layer protects the material from oxidative influences and significantly increases the service life of the components made from it. The zinc coating can be applied in various thicknesses, depending on the specific requirements of the application. Typical coating thicknesses range from 5 to 20 µm. The chemical composition and mechanical properties of the base material DC03 remain unchanged after galvanizing and meet the requirements of DIN EN 10130. DC03 therefore retains its excellent cold formability and mechanical performance. The yield strength, tensile strength and elongation at break also remain in the same range as for ungalvanized DC03. In addition to mechanical performance, the quality of the zinc coating is of central importance. The DIN EN 10152 standard specifies the requirements for the uniformity of the coating, the adhesive strength of the zinc and the surface quality. These requirements ensure that the galvanized products offer high corrosion resistance and an aesthetically pleasing surface. The use of DC03 in accordance with DIN EN 10152 is widespread in the automotive industry, in the construction industry and in the manufacture of household appliances, where improved corrosion resistance is required in addition to high formability. Electrolytic galvanizing offers optimum protection here without impairing the excellent mechanical properties of the base material. In summary, it can be said that the deep-drawing grade DC03 offers a wide range of applications in accordance with both DIN EN 10130 and DIN EN 10152. While DIN EN 10130 focuses on high formability and surface quality, DIN EN 10152 supplements these properties with improved corrosion resistance thanks to the zinc coating. Both standards ensure that DC03 is a reliable and high-quality material for numerous industrial applications. Cold-rolled flat steel DC03, produced in accordance with the DIN EN 10130 and DIN EN 10152 standards, offers a number of advantages for applications in the cold forming process. While DIN EN 10130 defines the basic requirements for chemical composition, mechanical properties and surface quality, DIN EN 10152 extends these specifications to include specific conditions for electrolytically galvanized products that offer additional corrosion protection. Both standards together ensure that DC03 is a versatile material with high quality and durability.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are specially designed components used to protect boiler and heat exchanger tubes from erosion, wear, and high-temperature damage. Manufactured with precision and expertise, these shields ensure enhanced tube life, reduced maintenance, and efficient operation in demanding industrial environments. SS 304 Half Round Tube Shield The SS 304 Half Round Tube Shield is a semi-circular protective cover made from high-quality stainless steel grade 304. It is widely used in thermal and mechanical systems where tube surfaces are exposed to harsh operating conditions. The half-round design allows for easy installation over the tubes while providing robust protection against flue gases, abrasives, and thermal stress. Chemical Composition of SS 304 – Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 10.5% • Iron (Fe): Balance Applications: Widely used in boilers, heat exchangers, steam lines, and furnaces due to its excellent corrosion resistance, oxidation resistance, and durability in high-temperature environments. Uses Half Round Tube Shields are essential components in a wide range of thermal and mechanical systems. Their primary function is to protect exposed tube surfaces from damage caused by high-temperature operations, abrasive flow, and chemical environments. Common uses include: Boiler tube protection in thermal and power plants, where shields guard against ash erosion, slagging, and flame impingement. Shielding heat exchanger tubes from erosion and corrosion caused by turbulent gas flow and aggressive operating media. Preventing mechanical wear from high-velocity gas flow in furnace and combustion systems, especially in radiant heat zones. Providing long-term protection for high-temperature tubing in petrochemical and refinery systems, helping to reduce downtime and costly tube replacements. These shields serve as a barrier between the harsh environment and the structural tube surface, thereby improving operational safety, minimizing maintenance, and extending the service life of critical equipment. Features Ladhani Metal Corporation designs and manufactures Half Round Tube Shields with features that ensure long-term reliability, precise fit, and consistent performance even in the most challenging environments: Material: Made from high-grade stainless steel 304, offering excellent resistance to corrosion, oxidation, and heat-related stress. Design: Formed into a precise half-round shape to ensure full coverage and a secure fit over the outer curvature of tubes. Finish: Available in bright annealed, pickled & passivated, or other surface finishes as per client requirements for enhanced surface integrity and aesthetic appeal. Durability: Built with strong mechanical properties to withstand erosion, impact, and thermal cycling over prolonged use. Custom Sizes: Manufactured in a variety of thicknesses, lengths, and diameters to match specific tube dimensions and installation needs. Applications: Thermal Power Stations, where boiler tubes are continuously exposed to high heat and fly ash. Refineries and Petrochemical Plants, where process gases and liquids can be corrosive and erosive. Heat Recovery Steam Generators (HRSGs), where shields protect tubes during the waste heat recovery process. Chemical Processing Units, where exposure to reactive media necessitates strong material protection. Pulp and Paper Industry, particularly in recovery boilers and steam-generating systems. Industrial Boilers and Steam Systems that require reliable tube integrity for safe and efficient operation. These shields are critical to maintaining the integrity and efficiency of equipment in heavy-duty industrial systems. Conclusion The SS 304 Half Round Tube Shield by Ladhani Metal Corporation is a trusted solution for protecting vital tube systems in aggressive and high-temperature environments. Engineered for performance and longevity, these shields not only extend the life of your tubing systems but also minimize downtime and maintenance costs. With customizable dimensions, superior raw material, and precision forming, Ladhani Metal Corporation stands as a dependable partner for all your tube protection requirements. For more details, inquiries, or to request a quote, please contact Ladhani Metal Corporation.

DIN 2632 titanium flanges PN 10 are precision-fabricated weld neck flanges produced according to the DIN 2632 standard. These flanges are designed for medium-pressure applications up to 10 bar (145 psi), offering excellent corrosion resistance, strength, and durability in highly demanding industrial environments. Manufactured from high-grade titanium alloys, they provide outstanding performance in aggressive chemical, marine, and high-temperature settings where conventional materials may fail. Ladhani Metal Corporation is a trusted global manufacturer and supplier of titanium flanges, known for its consistent quality and engineering precision. Each flange is rigorously tested to ensure compliance with applicable industrial standards and environmental regulations. Pressure Rating: • PN 10 (10 bar / 145 psi): Suitable for medium-pressure pipeline systems requiring superior corrosion resistance and mechanical integrity. Flange Type: • Weld Neck Flanges Designed with a long tapered hub to ensure strong pipe alignment and reduce stress concentration at the flange base. This design supports smooth flow transitions and enhances joint strength. • Flat Face (FF) Flanges Flat face design promotes even gasket compression and is preferred for use with cast components or soft gasket materials. Titanium Grades and Composition: Grade 2 (Commercially Pure Titanium) • Titanium (Ti): ≥ 99.2% • Oxygen (O): ≤ 0.25% • Carbon (C): ≤ 0.08% • Nitrogen (N): ≤ 0.03% • Iron (Fe): ≤ 0.30% • Hydrogen (H): ≤ 0.015% Applications: Known for excellent corrosion resistance and good mechanical properties, Grade 2 titanium is commonly used in chemical processing, water treatment, and marine applications where corrosion resistance is critical. Grade 5 (Ti-6Al-4V Alloy) • Titanium (Ti): Balance • Aluminum (Al): 5.5 – 6.75% • Vanadium (V): 3.5 – 4.5% • Iron (Fe): ≤ 0.30% • Oxygen (O): ≤ 0.20% • Carbon (C): ≤ 0.08% • Nitrogen (N): ≤ 0.05% Applications: Grade 5 offers superior strength and excellent corrosion resistance, widely used in aerospace, marine, and high-performance chemical environments requiring higher mechanical properties. Applications of DIN 2632 Titanium Flanges PN 10: • Chemical and Petrochemical Industry Used in piping systems transporting aggressive acids, alkalis, and oxidizing substances. • Marine and Offshore Ideal for seawater piping, shipbuilding, and offshore platforms requiring corrosion-resistant materials. • Water Treatment and Desalination Applied in high-purity water systems and desalination plants operating at moderate pressures. • Aerospace and Power Generation Used in environments exposed to high temperatures and corrosive atmospheres. Key Features: • Compliant with DIN 2632 standards • PN 10 pressure rating for medium-pressure service • Weld neck design for robust pipe-flange connection • Available in Grade 2 and Grade 5 titanium alloys for tailored performance • Flat face option for even gasket contact • Lightweight with high strength-to-weight ratio • Suitable for harsh chemical and marine environments • Custom sizes, finishes, and titanium grades available upon request Conclusion: DIN 2632 Titanium Flanges PN 10 from Ladhani Metal Corporation offer a reliable and durable solution for medium-pressure applications demanding exceptional corrosion resistance and mechanical performance. Made from premium titanium alloys such as Grade 2 and Grade 5, these flanges are ideal for chemical, marine, desalination, aerospace, and power generation sectors. For custom dimensions, technical consultation, or pricing information, contact Ladhani Metal Corporation today.

DIN 2628 Monel flanges PN 250 are high-performance weld neck flanges engineered in compliance with the DIN 2628 standard. Designed for high-pressure applications up to 250 bar (3625 psi), these flanges are constructed from Monel alloys, known for their exceptional resistance to corrosion, particularly in acidic and saline environments. Monel flanges deliver robust mechanical strength and thermal stability, making them suitable for challenging industrial applications that involve fluctuating temperatures, corrosive substances, and high mechanical stress. Ladhani Metal Corporation is a reliable global manufacturer and exporter of Monel flanges, providing products that meet exacting international standards for quality and performance. Our DIN 2628 PN 250 Monel weld neck flanges are extensively used in chemical processing, marine engineering, desalination systems, and offshore oil and gas installations. Known for superior build quality and long-term durability, these flanges ensure safe and efficient operations in pressure-sensitive systems exposed to harsh service conditions. Pressure Rating: • PN 250 (250 bar / 3625 psi): Suitable for systems requiring high-pressure endurance, secure sealing capabilities, and enhanced structural integrity. Flange Type: • Weld Neck Flanges Characterized by a long tapered hub that minimizes stress at the weld junction. Ideal for high-temperature and high-pressure applications. • Flat Face (FF) Flanges Provides an even surface for gasket compression, ensuring reliable sealing. Well-suited for connections involving cast components or brittle materials. Monel Grades and Composition: Monel 400 (UNS N04400) • Nickel (Ni): ≥ 63.0% • Copper (Cu): 28.0 – 34.0% • Iron (Fe): ≤ 2.5% • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 0.5% • Carbon (C): ≤ 0.3% Applications: Offers excellent resistance to seawater, hydrofluoric acid, and alkalis. Commonly used in marine piping, pump shafts, heat exchangers, and chemical processing equipment. Monel K500 (UNS N05500) • Nickel (Ni): ≥ 63.0% • Copper (Cu): 27.0 – 33.0% • Aluminum (Al): 2.3 – 3.15% • Titanium (Ti): 0.35 – 0.85% • Iron (Fe): ≤ 2.0% • Carbon (C): ≤ 0.25% Applications: Precipitation-hardened alloy providing greater strength and hardness than Monel 400. Suitable for valves, springs, and high-strength fasteners in corrosive environments including marine and chemical processing systems. Applications of DIN 2628 Monel Flanges PN 250: • Marine Engineering Highly resistant to saltwater corrosion, suitable for shipbuilding, subsea pipelines, and desalination plants. • Chemical and Petrochemical Processing Performs well in environments containing strong acids, alkalis, and chlorinated solvents. • Offshore Oil and Gas Used in systems that handle sour gas, brine, and other corrosive fluids. • Power and Energy Ideal for condenser systems and piping exposed to high-pressure steam and corrosive environments. • Pulp and Paper Industry Effective in processes involving sulfur compounds and acidic bleaching agents. Key Features: • Designed in accordance with DIN 2628 specifications • Rated for PN 250 (250 bar / 3625 psi) pressure systems • Weld neck configuration ensures superior mechanical strength and fatigue resistance • Flat face option supports uniform gasket pressure distribution • Available in Monel 400 and Monel K500 grades • Excellent corrosion resistance in marine, chemical, and high-saline environments • High mechanical strength and good thermal performance • Custom dimensions, pressure classes, and surface finishes available on request Conclusion: DIN 2628 Monel Flanges PN 250 from Ladhani Metal Corporation are engineered for high-pressure systems operating in some of the most demanding service environments. With excellent resistance to corrosion, superior mechanical properties, and thermal stability, Monel flanges provide reliable, long-term service in critical applications across marine, chemical, and offshore industries. Contact Ladhani Metal Corporation for detailed product specifications, technical support, or to request a customized quote.

DIN 2576 Monel Flanges PN 10 are high-integrity, slip-on flanges manufactured from corrosion-resistant nickel-copper alloys, specifically designed for demanding low to medium-pressure applications. Compliant with the DIN 2576 standard, these flanges provide exceptional resistance to seawater, acids, alkalis, and corrosive chemicals, making them ideal for highly corrosive industrial environments. The slip-on design allows the flange to be positioned over the pipe and welded in place, ensuring precise alignment and long-term mechanical stability. Ladhani Metal Corporation is a trusted manufacturer and international supplier of Monel flanges, producing components that meet rigorous dimensional, metallurgical, and quality standards. DIN 2576 Monel flanges are widely used in marine, chemical, and oil and gas industries, where material durability and corrosion resistance are critical. Pressure Rating: • PN 10 (10 bar / 145 psi): Designed for systems requiring stable operation under moderate pressures in fluid and gas transport environments. Flange Types: • Slip-On Flanges Facilitate easy assembly by slipping over the pipe and welding on both sides to ensure a leak-proof and secure joint. • Flat Face (FF) Flanges Designed for use with flat gaskets and mating surfaces, offering even pressure distribution and sealing performance, particularly with brittle or non-metallic materials. Monel Grades and Composition: Monel 400 (UNS N04400) Composition: • Nickel (Ni): ≥ 63.0% • Copper (Cu): 28.0 – 34.0% • Iron (Fe), Manganese (Mn), Silicon (Si), Carbon (C): Trace amounts Applications: Monel 400 is well-known for its outstanding resistance to seawater, hydrofluoric acid, sulfuric acid, and alkalis. It is widely used in marine engineering, chemical processing, and heat exchangers. Monel K500 (UNS N05500) Composition: • Nickel (Ni): ≥ 63.0% • Copper (Cu): ~30.0% • Aluminum (Al): 2.3 – 3.15% • Titanium (Ti): 0.35 – 0.85% Applications: Monel K500 offers the same corrosion resistance as Monel 400 but with significantly higher strength and hardness due to age-hardening. It is ideal for high-stress applications such as pump shafts, valve components, and marine fasteners. Applications of DIN 2576 Monel Flanges: • Marine and Offshore Engineering Ideal for seawater exposure, ballast systems, and structural applications in shipbuilding and offshore platforms. • Chemical and Petrochemical Processing Used in piping systems exposed to strong acids, caustics, and other corrosive agents. • Oil and Gas Industry Suitable for sour gas (H₂S) environments, offshore drilling equipment, and refining systems. • Heat Exchangers and Condensers Monel's thermal conductivity and corrosion resistance make it suitable for tube sheets and connecting flanges. • Power Generation Applied in cooling systems, boiler feedwater lines, and other aggressive service environments. • Aerospace and Defense Used in fuel and hydraulic systems where resistance to corrosion and stress cracking is required. Key Features: • Manufactured according to DIN 2576 specification • PN 10 pressure rating for low to medium-pressure fluid systems • Exceptional resistance to seawater, acids, alkalis, and chlorides • Available in Monel 400 and Monel K500 grades • Slip-on design enables easy installation and welding • Flat face versions for compatibility with flat gaskets and brittle materials • Excellent mechanical properties and corrosion resistance • Custom dimensions, finishes, and face types available upon request Conclusion: DIN 2576 Monel Flanges PN 10 from Ladhani Metal Corporation deliver high corrosion resistance and mechanical strength for aggressive environments where conventional materials fail. With availability in Monel 400 and K500 grades, these flanges are suitable for marine, oil & gas, and chemical applications. For technical support, project consultation, or custom orders, contact Ladhani Metal Corporation today.

DIN 2576 Stainless Steel Flanges PN 10 are high-quality, slip-on flanges manufactured from corrosion-resistant stainless steel, designed for use in low to medium-pressure piping systems. Produced according to the DIN 2576 standard, these flanges offer reliable sealing, ease of installation, and long-term durability in environments involving water, steam, air, oil, and chemical fluids. The slip-on design allows the flange to slide over the pipe and be welded into place, ensuring accurate alignment and structural integrity in a wide range of industrial applications. Ladhani Metal Corporation is a recognized manufacturer and global exporter of stainless steel flanges, delivering products that meet international quality, dimensional, and performance standards. DIN 2576 flanges provide excellent mechanical strength and corrosion resistance, making them ideal for use in chemical plants, water treatment systems, and general process industries. Pressure Rating: • PN 10 (10 bar / 145 psi): Designed for systems operating under low to moderate pressure, offering dependable performance in industrial fluid and gas transport. Flange Types: • Slip-On Flanges Designed to slip over the pipe and be welded on both the inside and outside, these flanges provide easy installation and solid structural support. • Flat Face (FF) Flanges Used with flat gaskets and flat mating surfaces to ensure even gasket compression and proper load distribution, especially when joining with non-metallic components or cast iron. Stainless Steel Grades and Composition: Stainless Steel 304 (UNS S30400) Composition: • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 10.5% • Carbon (C): ≤ 0.08% • Manganese (Mn), Silicon (Si), Phosphorus (P), Sulfur (S): Trace amounts • Iron (Fe): Balance Applications: 304 stainless steel offers good corrosion resistance, formability, and weldability, making it suitable for applications in food processing, water piping, and light chemical handling. Stainless Steel 316 (UNS S31600) Composition: • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% • Carbon (C): ≤ 0.08% • Iron (Fe): Balance Applications: 316 stainless steel is ideal for more aggressive environments, offering superior resistance to chlorides, acids, and marine exposure. Common applications include chemical plants, pharmaceutical systems, and marine piping. Stainless Steel 321 (UNS S32100) Composition: • Chromium (Cr): 17.0 – 19.0% • Nickel (Ni): 9.0 – 12.0% • Titanium (Ti): ≥ 5x(C) minimum • Carbon (C): ≤ 0.08% • Iron (Fe): Balance Applications: 321 stainless steel is stabilized with titanium to resist intergranular corrosion after welding. It is commonly used in high-temperature applications such as exhaust systems, heat exchangers, furnace parts, and thermal fluid piping in the chemical and petrochemical industries. Applications of DIN 2576 Stainless Steel Flanges: • Chemical and Petrochemical Industries Used in piping systems that handle corrosive chemicals, acids, and solvents, ensuring safe and long-lasting operation. • Water Treatment and Distribution Widely used in pipelines for potable water, wastewater, and desalination plants due to their corrosion resistance and hygienic properties. • Food and Beverage Processing Ideal for sanitary fluid handling systems, where stainless steel ensures contamination-free and easy-to-clean connections. • Marine and Offshore Applications Suitable for piping exposed to seawater and atmospheric corrosion, especially in deck and ballast systems. • General Industrial Use Used in heating systems, compressed air lines, fire protection networks, and process piping. • High-Temperature Services Grade 321 stainless steel is preferred in applications involving thermal cycling and continuous elevated temperatures, such as refinery piping and power plant components. Key Features: • Manufactured according to DIN 2576 standard • PN 10 pressure rating for low to medium-pressure systems • Excellent corrosion resistance and mechanical strength • Available in stainless steel 304, 316, 321, and other grades • Slip-on design ensures easy welding and alignment • Flat face options available for specific gasket and joint requirements • Suitable for chemical, marine, thermal, and general industrial applications • Available in customized sizes, face types, and surface finishes Conclusion: DIN 2576 Stainless Steel Flanges PN 10 from Ladhani Metal Corporation provide reliable, corrosion-resistant performance for a wide range of industrial systems operating under moderate pressure. For technical support, material selection, or custom orders, contact Ladhani Metal Corporation today. 📞 Contact Ladhani Metal Corporation Website: https://www.ladhanimetal.in/ https://www.ladhanimetal.com/ Email: info@ladhanimetals.com Request a Quote: Custom dimensions, materials, and finishes available upon request.

DIN 2573 Monel Flanges PN 6 are premium-quality, low-pressure plate flanges crafted from Monel alloys, specifically engineered for systems that operate in highly corrosive and aggressive environments. Manufactured in accordance with DIN 2573 standards, these flanges offer excellent resistance to seawater, acids, and high-temperature conditions, making them an ideal choice for industries such as marine engineering, chemical processing, oil and gas, and power generation. The exceptional properties of Monel alloys ensure durability and reliability in applications requiring strong resistance to pitting, crevice corrosion, and stress corrosion cracking. Ladhani Metal Corporation is a trusted manufacturer and global supplier of Monel alloy flanges, delivering high-quality products that meet rigorous international standards. The DIN 2573 flange design ensures easy installation and provides a secure, leak-free connection, even in low-pressure, harsh environments. Pressure Rating: • PN 6 (6 bar / 87 psi): Designed for low-pressure applications in corrosive and high-temperature environments where Monel’s strength and resistance to corrosion are critical for long-term performance. Flange Types: • Plate Flanges Flat flanges ideal for bolted connections in piping systems where gasket sealing is required, providing secure, leak-free operation in low-pressure systems. • Flat Face (FF) Flanges Used with flat gaskets and mating surfaces, ensuring uniform contact and load distribution, particularly when joining with non-metallic components or cast iron systems. • Slip-On Flanges These flanges slip over the pipe, providing easy alignment and easy-to-weld connections, ideal for low-pressure applications with moderate pressure fluctuations. • Custom-Machined Flanges Tailored to meet specific dimensional and material requirements, available in various sizes, grades, and face finishes to suit the needs of custom applications. Monel Grades and Composition: Monel 400 (UNS N04400) Composition: • Nickel (Ni): 63.0 – 70.0% • Copper (Cu): 28.0 – 34.0% • Iron (Fe): ≤ 2.5% • Manganese (Mn), Silicon (Si), Carbon (C): Trace amounts Applications: Monel 400 is widely used in marine environments, chemical processing, and heat exchangers, where it is subjected to both high temperatures and exposure to saltwater or acids. Its superior resistance to corrosion and oxidation makes it a preferred material in demanding applications like pumps, valves, and marine piping systems. Monel K-500 (UNS N05500) Composition: • Nickel (Ni): 63.0 – 70.0% • Copper (Cu): 27.0 – 33.0% • Aluminum (Al): 2.3 – 3.2% • Titanium (Ti): 0.35 – 0.85% • Iron (Fe): ≤ 2.5% Applications: Monel K-500 offers higher strength and hardness compared to Monel 400, making it suitable for applications in oil and gas extraction, marine industries, and aerospace systems, where both corrosion resistance and high mechanical properties are required. Applications of DIN 2573 Monel Flanges: • Chemical and Petrochemical Plants: Monel flanges are ideal for use in chemical reactors, exchangers, and pipelines handling aggressive chemicals like sulfuric acid, hydrochloric acid, and caustics. • Marine and Offshore Engineering: Highly resistant to seawater corrosion, Monel flanges are used extensively in marine piping systems, offshore oil rigs, and shipbuilding applications where exposure to saltwater and harsh weather conditions is frequent. • Oil and Gas Industry: Monel flanges are often used in production platforms, refineries, and pipelines exposed to brine and acidic substances, offering both strength and resistance to corrosion under high-stress conditions. • Power Generation: Used in systems handling high-temperature steam and corrosive environments, Monel flanges provide reliable service for high-performance power plant components. • Desalination and Water Treatment: With their corrosion resistance to saline environments, Monel flanges are also ideal for seawater desalination plants and water treatment facilities. Key Features: • Manufactured according to DIN 2573 standards • Rated for PN 6 low-pressure systems, with exceptional resistance to corrosion • Outstanding performance in highly corrosive, high-temperature environments • Available in Monel 400, Monel K-500, and other Monel alloys • High strength-to-weight ratio for reliable long-term performance • Suitable for marine, offshore, chemical, and power generation applications • Available with custom drilling, surface finishes, and flange faces Conclusion: DIN 2573 Monel Flanges PN 6 from Ladhani Metal Corporation provide unmatched durability, corrosion resistance, and performance in low-pressure applications exposed to challenging chemical, thermal, and environmental conditions. For custom dimensions, material selections, or technical support, contact Ladhani Metal Corporation today.

DIN 2573 Inconel Flanges PN 6 are precision-manufactured low-pressure plate flanges made from high-performance Inconel alloys, specifically engineered for highly corrosive and thermally challenging environments. Compliant with DIN 2573 standards, these flanges are ideally suited for low-pressure applications that demand exceptional resistance to oxidation, acids, and high-temperature stress. Inconel’s unique properties make these flanges suitable for aggressive processing systems in industries such as chemical manufacturing, petrochemicals, marine, power generation, and aerospace. Ladhani Metal Corporation is a recognized manufacturer and global supplier of Inconel alloy flanges, delivering premium-quality components built to international specifications. The DIN 2573 plate flange design ensures straightforward installation while providing excellent sealing reliability, especially in environments where conventional materials may degrade rapidly. Pressure Rating: • PN 6 (6 bar / 87 psi): Designed for low-pressure systems that operate under harsh chemical, thermal, or oxidative conditions, providing long-term durability and consistent performance. Flange Types: • Plate Flanges Flat-ring type flanges used in systems where welding and bolting are required, with gasket sealing for low-pressure flow lines. • Flat Face (FF) Flanges Used with flat gaskets and mating surfaces, especially in brittle or cast systems where full contact and load distribution are critical. • Slip-On Flanges Ease of installation and alignment with the pipe make these ideal for maintenance-friendly or modular low-pressure piping. • Custom-Machined Flanges Precision-machined to customer-defined sizes, Inconel grades, drilling standards, and flange face finishes. Inconel Grades and Composition: 1. Inconel 600 (UNS N06600) Composition: • Nickel (Ni): ≥ 72% • Chromium (Cr): 14.0 – 17.0% • Iron (Fe): 6.0 – 10.0% • Manganese (Mn), Silicon (Si), Carbon (C): Trace amounts Applications: Commonly used in heat exchangers, furnace components, and food processing equipment exposed to high temperatures and oxidizing chemicals. 2. Inconel 625 (UNS N06625) Composition: • Nickel (Ni): ≥ 58.0% • Chromium (Cr): 20.0 – 23.0% • Molybdenum (Mo): 8.0 – 10.0% • Niobium (Nb): 3.15 – 4.15% Applications: Ideal for seawater equipment, chemical processing plants, aerospace exhaust systems, and nuclear reactors due to excellent resistance to pitting, crevice corrosion, and stress corrosion cracking. 3. Inconel 718 (UNS N07718) Composition: • Nickel (Ni): 50.0 – 55.0% • Chromium (Cr): 17.0 – 21.0% • Iron (Fe): Balance • Molybdenum (Mo): 2.8 – 3.3% • Niobium (Nb): 4.75 – 5.5% • Titanium (Ti): 0.65 – 1.15% • Aluminum (Al): 0.2 – 0.8% Applications: Primarily used in aerospace, gas turbines, and cryogenic systems due to its exceptional high-temperature strength, oxidation resistance, and good weldability. It is ideal for use in extreme thermal environments, such as turbine engines and high-pressure systems. Applications of DIN 2573 Inconel Flanges: • Chemical and Acid Processing Plants: Withstand highly corrosive chemicals such as nitric, hydrochloric, and sulfuric acid under thermal cycling. • Power Generation and Heat Exchangers: Resist oxidation and high-temperature fatigue in boiler feed systems, turbine piping, and condensate lines. • Marine and Offshore Installations: Provide excellent resistance to seawater, salt spray, and chloride-induced stress corrosion cracking. • Aerospace and Jet Engine Systems: Used in fuel, exhaust, and cooling systems where heat and corrosion resistance are critical. • Environmental and Waste Treatment Facilities: Endure aggressive chemical waste, thermal gradients, and acidic sludges in scrubbing and exhaust ducting systems. Key Features: • Designed according to DIN 2573 standards • PN 6 rating for low-pressure service with high chemical and thermal loads • Outstanding resistance to acids, chlorides, oxidation, and high temperatures • Available in Inconel 600, 625, 718, and other high-nickel alloys • Low maintenance and long service life in corrosive environments • Machinable for customized face types and bolt hole configurations Conclusion: DIN 2573 Inconel Flanges PN 6 from Ladhani Metal Corporation are engineered for performance in chemically aggressive and thermally intense low-pressure systems. With superior corrosion and heat resistance, these flanges are a critical component in applications where traditional materials fail. For specific alloy recommendations, custom dimensions, or technical support, contact Ladhani Metal Corporation today.

DIN 2573 Titanium Flanges PN 6 are lightweight, corrosion-resistant plate flanges manufactured to DIN 2573 standards, specifically designed for low-pressure industrial and chemical applications. Fabricated from premium-grade titanium, these flanges are known for their exceptional strength-to-weight ratio, biocompatibility, and superior corrosion resistance, especially in aggressive environments involving chlorides, seawater, and oxidizing agents. DIN 2573 titanium flanges are ideal for critical applications across industries such as chemical processing, desalination, offshore engineering, medical systems, and aerospace. Ladhani Metal Corporation is a trusted supplier and exporter of precision-engineered titanium flanges, delivering products that meet stringent global quality standards. The DIN 2573 design, combined with the inherent material advantages of titanium, ensures long-lasting performance and ease of integration in low-pressure piping systems. Pressure Rating: • PN 6 (6 bar / 87 psi): Suitable for low-pressure pipelines and systems where outstanding corrosion resistance and long service life are essential, even under chemically aggressive or saline conditions. Flange Types: • Plate Flanges Standard flat flanges designed for bolted connections with gasket sealing, suitable for low-pressure service. • Flat Face (FF) Flanges Ensures full contact with mating flanges or non-metallic components to prevent stress cracking or uneven loading. • Slip-On Flanges Allow for easy alignment and welding, widely used in systems where frequent maintenance or disassembly is required. • Custom-Machined Flanges Available in custom sizes, dimensions, and titanium grades to suit specific project or industry needs. Titanium Grades and Composition: 1. Grade 2 (Commercially Pure Titanium) Composition: • Titanium (Ti): ≥ 99.2% • Iron (Fe): ≤ 0.30% • Oxygen (O): ≤ 0.25% • Carbon (C): ≤ 0.08% • Nitrogen (N): ≤ 0.03% • Hydrogen (H): ≤ 0.015% Applications: Used in desalination plants, chemical handling, marine equipment, and medical fluid systems due to its excellent formability, corrosion resistance, and biocompatibility. 2. Grade 5 (Ti-6Al-4V – Titanium Alloy) Composition: • Titanium (Ti): Balance • Aluminum (Al): 5.5 – 6.75% • Vanadium (V): 3.5 – 4.5% • Iron (Fe): ≤ 0.40% • Oxygen (O): ≤ 0.20% Applications: Preferred in aerospace, high-performance marine, and industrial applications requiring superior mechanical strength, wear resistance, and corrosion protection. Applications of DIN 2573 Titanium Flanges: • Chemical and Petrochemical Plants: Ideal for conveying aggressive acids, chlorides, and alkalis in low-pressure systems. • Desalination and Marine Systems: Exceptional resistance to seawater corrosion makes them suitable for brine, saltwater, and offshore structures. • Medical and Pharmaceutical Equipment: Non-toxic and biocompatible properties support sterile piping systems for fluids and gases. • Aerospace and Defense: Lightweight and high-strength material enhances performance in low-pressure structural and fuel systems. Key Features: • Manufactured according to DIN 2573 specifications • Designed for PN 6 low-pressure applications • Superior corrosion resistance in marine and chemical environments • Lightweight with high structural strength • Suitable for welding, pickling, passivation, and surface customization • Available in Grade 2, Grade 5, and other titanium alloys Conclusion: DIN 2573 Titanium Flanges PN 6 by Ladhani Metal Corporation offer a high-performance, corrosion-resistant solution for low-pressure systems exposed to harsh environments. With excellent mechanical properties and unmatched longevity, these titanium flanges serve critical roles in chemical, marine, medical, and water treatment industries. For detailed specifications, custom sizes, or material selection assistance, contact Ladhani Metal Corporation.