Ladhani Metal Corporation manufactures, supplies, and exports Boiler Tube Protection Shields and Bends, engineered to safeguard boiler tubes at critical sections such as bends, high-velocity flue gas zones, and soot blower impact areas. These shields are precision-formed to match the outer curvature of tubes, providing a sacrificial protective layer that prevents erosion, corrosion, oxidation, and localized tube thinning. By extending the service life of boiler tubes, they reduce unplanned shutdowns and maintenance costs while ensuring efficient operation of boilers, HRSGs, and heat recovery systems. Function of Boiler Tube Protection Shield / Bend • Protects tube bends and exposed surfaces from high-temperature erosion • Minimizes oxidation and corrosion damage in flue gas streams • Guards tubes from abrasive fly ash and soot blower jets • Extends operational reliability in high-stress boiler environments Available Grades Stainless Steel Grades • SS 304 / SS 304L • SS 310 / SS 310S • SS 316 / SS 316L • SS 410 / SS 420 / SS 430 Special Alloy Grades • 1Cr18Ni9Ti • Cr25Ni20 • 1Cr25Ni20Si2 • Cr23Ni13 • 1Cr20Ni14Si2 • 1Cr13 Applications • Power generation boilers – protection of tube bends in superheater and reheater sections • Waste Heat Recovery Boilers (WHRBs) – erosion resistance in high-velocity flue gas regions • Heat Recovery Steam Generators (HRSGs) – protection of critical bends in thermal cycles • Industrial boilers – extended life for tubes in erosive and corrosive service zones • Petrochemical and process heaters – reliable protection in high-temperature tube bends Features • Superior corrosion and oxidation resistance • High mechanical strength and thermal stability • Designed for precise fit on straight tubes and bends • Manufactured in a wide range of stainless steel and alloy grades • Long-lasting, low-maintenance tube protection solution Conclusion Boiler Tube Protection Shields and Bends from Ladhani Metal Corporation deliver robust protection for tubes operating under extreme thermal and erosive conditions. Available in multiple stainless steel and special alloy grades, these shields ensure longer tube life, reduced maintenance costs, and higher boiler efficiency in domestic and international power and industrial applications. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #HalfRoundReheaterShield #ReheaterTubeShield #BoilerReheaterProtection #PowerPlantTubeShield #BoilerErosionShield #SteamBoilerTubeShield #HighTempTubeShield #BoilerWearProtection#BoilerTubeProtection #BoilerTubeShield #BoilerBendShield #HalfRoundTubeShield #BoilerTubeWearProtection #PowerPlantTubeShield #BoilerTubeErosionShield #BoilerTubeProtectionShield #BoilerTubeSafety #BoilerTubeBendShield #IndustrialBoilerShield #SteamBoilerTubeProtection #HeatExchangerTubeShield #BoilerTubeGuard #BoilerTubeShielding

Ladhani Metal Corporation offers SS 316 Half Round Tube Shields designed to provide robust protection for reheater (R/H) tubes in boilers, power plants, and industrial steam systems. Reheater tubes carry steam through the reheater section of the boiler, where the steam is reheated after partial expansion in the high-pressure turbine to enhance efficiency and reduce moisture formation. Manufactured from molybdenum-bearing austenitic stainless steel grade SS 316, these shields deliver superior resistance to pitting, crevice corrosion, and high-temperature oxidation, making them ideal for aggressive and chloride-containing environments. Function of R/H Tubes • Carry steam through the reheater section of the boiler • Exposed to very high temperatures (often > 540°C) and erosion from flue gases • Often protected with Half Round Tube Shields in high-velocity and abrasive gas flow zones Ladhani Metal Corporation manufactures, supplies, and exports SS 316 Half Round Tube Shields in various lengths, diameters, and thicknesses, meeting both domestic and international quality standards. SS 316 Grade Chemical Composition – Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.00 – 18.00% • Nickel (Ni): 10.00 – 14.00% • Molybdenum (Mo): 2.00 – 3.00% • Iron (Fe): Balance Uses • Protects reheater tubes from erosion, oxidation, and chloride-induced corrosion • Shields R/H tubes in high-velocity flue gas and particle-laden zones • Extends service life of steam system components under aggressive operating conditions • Suitable for utility boilers, WHRBs, HRSGs, and process heaters Features • Excellent corrosion resistance – Performs well in chloride-rich and oxidizing environments • High thermal stability – Maintains mechanical strength at elevated temperatures • Molybdenum alloyed – Enhanced resistance to pitting and crevice corrosion • Precision-engineered fit – Designed to match exact tube curvature for maximum coverage Applications • Power generation boilers – Long-term reheater tube protection in severe conditions • Waste heat recovery systems – Guards against erosion from high-velocity particles • Industrial steam plants – Reliable under variable thermal cycles • Petrochemical and marine-based steam systems – Suitable for saline and chloride-heavy atmospheres Conclusion The SS 316 Half Round Tube Shield for Reheater (R/H) Tubes by Ladhani Metal Corporation offers high-performance protection against erosion, oxidation, and corrosive damage in extreme operating environments. Designed for precision fit and durability, these shields reduce maintenance downtime and extend equipment lifespan. Available in a wide range of export-ready specifications, they are trusted by industries worldwide. For technical details and supply inquiries, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #HalfRoundReheaterShield #ReheaterTubeShield #BoilerReheaterProtection #PowerPlantTubeShield #BoilerErosionShield #SteamBoilerTubeShield #HighTempTubeShield #BoilerWearProtection

Ladhani Metal Corporation offers SS 304L Half Round Tube Shields specifically designed to protect reheater (R/H) tubes in boilers, power plants, and industrial steam systems. Reheater tubes carry steam through the reheater section of the boiler, where the steam is reheated after partial expansion in the high-pressure turbine to improve efficiency and prevent moisture formation. Manufactured from low-carbon austenitic stainless steel grade SS 304L, these shields provide excellent corrosion resistance, high-temperature oxidation resistance, and superior weldability, reducing the risk of carbide precipitation during welding. Function of R/H Tubes • Carry steam through the reheater section of the boiler • Exposed to very high temperatures (often > 540°C) and erosion from flue gases • Often protected with Half Round Tube Shields in areas where flue gas velocity and ash particles cause wear Ladhani Metal Corporation manufactures, supplies, and exports SS 304L Half Round Tube Shields in various lengths, diameters, and thicknesses, catering to both domestic and international markets. SS 304L Grade Chemical Composition – Austenitic Stainless Steel • Carbon (C): ≤ 0.03% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 18.00 – 20.00% • Nickel (Ni): 8.00 – 12.00% • Iron (Fe): Balance Applications: Suitable for reheater sections in thermal power plants, waste heat recovery boilers (WHRBs), and heat recovery steam generators (HRSGs) operating in oxidizing and moderately corrosive service environments. Uses • Protects reheater tubes from erosion, oxidation, and soot blower damage • Shields R/H tubes in high-velocity flue gas zones • Extends service life of steam circuit components in high-temperature operations • Applicable in utility boilers, WHRBs, HRSGs, and industrial steam plants Features • Superior corrosion resistance – Ideal for oxidizing boiler atmospheres • High thermal stability – Maintains mechanical integrity at elevated temperatures • Low-carbon content – Minimizes sensitization risk during welding • Precision-engineered fit – Matches exact tube curvature for maximum coverage Applications • Power generation boilers – Protection for reheater tubes under extreme thermal conditions • Waste heat recovery systems – Guards R/H tubes against particle erosion • Industrial steam plants – Reliable in fluctuating temperature cycles • Petrochemical and process heaters – Suitable for high-efficiency reheating sections Conclusion The SS 304L Half Round Tube Shield for Reheater (R/H) Tubes by Ladhani Metal Corporation offers long-lasting, corrosion-resistant protection for tubes operating under extreme temperature and erosive conditions. Designed for precision fit and durability, these shields reduce maintenance needs and extend equipment life, with availability in a wide range of export-ready specifications. For technical details and supply inquiries, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #HalfRoundReheaterShield #ReheaterTubeShield #BoilerReheaterProtection #PowerPlantTubeShield #BoilerErosionShield #SteamBoilerTubeShield #HighTempTubeShield

Ladhani Metal Corporation offers SS 430 Boiler Half Round Tube Shields designed to protect straight boiler and heat exchanger tubes from erosion, oxidation, and high-temperature wear. Manufactured from ferritic stainless steel grade SS 430, these shields provide good corrosion resistance, excellent formability, and reliable thermal stability in moderately aggressive service environments. The shields are precision-formed into a half-round profile to match the curvature of standard boiler tubes, ensuring a secure fit and effective coverage. This design provides a physical barrier against soot blower impact, abrasive flue gas, and particulate erosion, extending the operational life of tubes and reducing maintenance costs. Ladhani Metal Corporation manufactures, supplies, and exports SS 430 Boiler Half Round Tube Shields in a wide range of lengths, diameters, and thicknesses, catering to both domestic and international markets. SS 430 Grade Chemical Composition – Ferritic Stainless Steel • Carbon (C): ≤ 0.12% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): ≤ 0.75% • Iron (Fe): Balance Applications: Ideal for power plants, WHRBs, HRSGs, and industrial boiler systems requiring protection in dry heat and oxidizing environments. Uses • Shields straight tubes in utility boilers and superheaters • Protects against flue gas erosion and surface scaling • Applied in WHRBs and HRSGs operating with clean or mildly corrosive gases • Suitable for industrial furnaces and heat recovery systems Features • Cost-effective protection – Combines durability with economic material choice • Oxidation resistance – Performs well in clean flue gas and dry heat conditions • Thermal reliability – Withstands repeated heating cycles without deformation • Precision fit – Formed to match tube diameter for secure installation • Flexible mounting – Can be clamped, banded, or tack welded • Export quality – Manufactured to meet international standards Applications • Thermal power stations – Guards steam and boiler tubes from scaling • Waste heat recovery boilers – Shields tubes in clean gas environments • Process heaters – Effective in less corrosive gas heating systems • Food and cement industries – Protects tubes from oxidation and moderate wear Conclusion The SS 430 Boiler Half Round Tube Shield from Ladhani Metal Corporation delivers cost-efficient and reliable protection for boiler tubes in dry heat and oxidizing service conditions. With good formability, corrosion resistance, and thermal performance, these shields are a practical solution for extending tube life and reducing operational downtime. Available in custom dimensions and export-ready specifications, they serve a wide range of industrial boiler applications worldwide. For detailed sizing, technical support, or export inquiries, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield

Half Round Tube Shield Ladhani Metal Corporation manufactures high-quality Half Round Tube Shields designed to protect boiler and heat exchanger tubes from erosion, scaling, and thermal fatigue. These shields are especially suited for systems where tubes are exposed to turbulent gas flow, particulate-laden environments, and fluctuating thermal cycles. The semi-cylindrical shape of the shield allows easy installation and reliable surface protection, extending the operational life of the tubes. 1Cr13 Half Round Tube Shield for LTSH Tube The 1Cr13 Half Round Tube Shield is fabricated from martensitic stainless steel containing approximately 13% chromium. Known for its good corrosion resistance, moderate heat resistance, and excellent wear strength, 1Cr13 is suitable for medium-temperature applications, especially in mildly corrosive or oxidizing environments. This makes it an ideal material for shielding LTSH (Low Temperature Superheater) tubes from flue gas erosion and ash abrasion. The Low Temperature Superheater (LTSH) is a section in a boiler where saturated steam from the steam drum is superheated to a moderately higher temperature before entering the high-temperature superheater stages. Positioned in areas with relatively lower flue gas temperatures, the LTSH helps improve thermal efficiency and reduces moisture content in steam. Due to constant exposure to abrasive flue gases and ash, LTSH tubes are prone to wear and require protective shielding, such as half round tube shields, to extend service life. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of 1Cr13 Half Round Tube Shields, delivering durable and cost-effective solutions for various thermal power and heat exchanger applications. Chemical Composition of 1Cr13 – Martensitic Stainless Steel • Carbon (C): 0.15 – 0.20% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 12.0 – 14.0% • Iron (Fe): Balance Applications: Suitable for moderately corrosive and abrasive environments, especially in boiler systems, where mechanical strength and oxidation resistance are required at elevated but controlled temperatures. Uses • Protection of LTSH tubes in thermal power plant boilers • Surface shielding in steam generators and utility boilers • Coverage of superheater coils in flue gas-exposed zones • Suitable for coal-fired and biomass-fired boiler applications • Used in refinery and petrochemical boilers with moderate gas exposure Features • Good corrosion and oxidation resistance – Provides reliable performance in mildly corrosive environments • Wear and erosion resistance – Withstands mechanical wear from ash and soot-laden gas streams • Precise custom fitting – Fabricated to match specific tube diameters and bend radii • Enhanced tube protection – Minimizes wear on LTSH tubes, increasing overall system lifespan • Easy installation – Supports clamp-on, weld-on, and banding installation options • Wide availability – Offered in various lengths, thicknesses, and profiles Applications • power generation – Used in LTSH zones to protect from flue gas erosion and slagging • WHRBs – Shields exposed surfaces of tube bends in waste heat recovery systems • chemical and fertilizer plants – Applied in steam systems requiring moderate temperature durability • cement industry – Suitable for boilers dealing with particulate exhaust gas environments • industrial utility boilers – Enhances tube life in fluctuating thermal load zones Conclusion The 1Cr13 Half Round Tube Shield for LTSH Tube by Ladhani Metal Corporation – manufacturer, supplier, and exporter – is a dependable solution for protecting tube surfaces in moderately corrosive, abrasive, and thermally active environments. Its martensitic stainless composition and mechanical durability make it ideal for power plants and process boilers requiring extended service life with lower maintenance needs. For customized dimensions, technical support, or quotation, contact Ladhani Metal Corporation.

Half Round Tube Shield Ladhani Metal Corporation manufactures precision-engineered Half Round Tube Shields to protect boiler and heat exchanger tubes from corrosion, erosion, and surface degradation. Designed for durability in aggressive environments, these shields are especially suited for thermal equipment where tubes are subjected to high flow velocities, abrasive particles, and flue gas turbulence. Their half-round shape allows easy installation while offering long-term protection and reduced maintenance. 1Cr20Ni14Si2 Half Round Tube Shield for LTSH Tube The 1Cr20Ni14Si2 Half Round Tube Shield is manufactured from a high-temperature-resistant chromium-nickel-silicon alloy. With approximately 20% chromium, 14% nickel, and added silicon, this material offers outstanding oxidation resistance, excellent strength at elevated temperatures, and superior resistance to high-temperature corrosion. It is an ideal choice for shielding Low Temperature Superheater (LTSH) tubes, which are frequently exposed to flue gases carrying ash and particulate matter that can cause rapid wear. The Low Temperature Superheater (LTSH) is a section in a boiler where saturated steam from the steam drum is superheated to a moderately higher temperature before entering the high-temperature superheater stages. Positioned in areas with relatively lower flue gas temperatures, the LTSH helps improve thermal efficiency and reduces moisture content in steam. Due to constant exposure to abrasive flue gases and ash, LTSH tubes are prone to wear and require protective shielding, such as half round tube shields, to extend service life. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of 1Cr20Ni14Si2 Half Round Tube Shields, providing high-performance shielding solutions for challenging industrial heat transfer applications. Chemical Composition of 1Cr20Ni14Si2 – Heat-Resistant Alloy Steel • Carbon (C): ≤ 0.15% • Manganese (Mn): ≤ 1.50% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): 1.00 – 2.50% • Chromium (Cr): 19.0 – 22.0% • Nickel (Ni): 13.0 – 15.0% • Iron (Fe): Balance Applications: Best suited for components exposed to oxidizing environments, fluctuating temperatures, and particulate flow where metal surface protection is critical. Uses • Protection of LTSH tubes in thermal power plant boilers • Coverage of heat exchanger tubes in waste heat recovery boilers • Shielding superheater coils from ash erosion and thermal stress • Ideal for utility boilers, steam generators, and flue gas-exposed piping • Applied in industrial boilers within cement, pulp & paper, and refining sectors Features • High-temperature resistance – Performs well in continuous service at elevated temperatures • Oxidation protection – Excellent resistance to flue gas scaling and surface degradation • Precise fitment – Custom curved for exact tube geometry for secure and uniform coverage • Enhanced durability – Reduces erosion, thermal fatigue, and mechanical damage • Versatile installation – Compatible with clamp-on, weld-on, or banding attachment methods • Custom dimensions – Available in multiple sizes and thicknesses per system requirement Applications • thermal power stations – Protects superheater coils and economizer tube bends from low-temperature gas wear • WHRBs – Shields curved tubes in exhaust heat recovery systems • chemical and petrochemical plants – Ensures protection for process steam lines exposed to flue gases • HRSGs – Increases the durability of LTSH coil tubes in combined-cycle systems • boiler and furnace systems – Ideal for superheater areas prone to wear from ash and soot deposition Conclusion The 1Cr20Ni14Si2 Half Round Tube Shield for LTSH Tube by Ladhani Metal Corporation – manufacturer, supplier, and exporter – offers excellent resistance to oxidation, scaling, and thermal damage in low-temperature superheater zones. Its heat-resistant composition and long service life make it a dependable choice for demanding boiler and heat exchanger applications across multiple industries. For custom requirements or technical inquiries, contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-crafted protective components used to shield boiler and heat exchanger tubes from high-temperature oxidation, slag accumulation, erosion, and thermal fatigue. These shields are essential in industrial systems where tubes are exposed to flue gases, particulate flow, and repeated heating cycles. Their half-round design enables efficient and secure installation over straight or curved tube sections, significantly extending tube life and reducing maintenance frequency. 1Cr25Ni20Si2 U Type Outer Half Round Tube Shield The 1Cr25Ni20Si2 U Type Outer Half Round Tube Shield is manufactured from a high-temperature resistant austenitic alloy containing 25% chromium, 20% nickel, and 2% silicon. This combination offers excellent oxidation resistance, strong thermal stability, and enhanced anti-scaling performance at elevated temperatures. Designed specifically to cover the outer arc of U-bend tubes, this shield protects surfaces most exposed to hot gases, flame impingement, and corrosive particles in demanding thermal environments. • Outer U Type Half Round Tube Shield – Protects the external arc of U-bend tubes from direct exposure to slag, high-velocity flue gas, and oxidizing atmospheres. Ladhani Metal Corporation is a reputed manufacturer, supplier, and exporter of 1Cr25Ni20Si2 U Type Outer Half Round Tube Shields, offering durable and heat-resistant solutions for thermal, petrochemical, and metallurgical applications. Chemical Composition of 1Cr25Ni20Si2 – Austenitic Heat-Resistant Alloy • Carbon (C): ≤ 0.10% • Manganese (Mn): ≤ 1.50% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): 1.50 – 2.50% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Applications: Best suited for environments requiring resistance to oxidation, thermal cycling, and high-temperature corrosion, especially in furnaces and exhaust systems. Uses • Outer arc protection of U-bend tubes in reheaters and superheaters exposed to slag, flame, and flue gas in power plants • Shielding external curves of return bends in waste heat recovery units (WHRBs) and HRSGs • Applied in radiant coils and heat exchanger bends operating in high-temperature industrial furnaces • Suitable for petrochemical processing units, steam reformers, and chemical heaters handling oxidizing or carburizing gases • Ideal for high-heat metallurgical and cement kiln systems requiring thermal fatigue and scale resistance Features • Excellent high-temperature oxidation resistance – High chromium and silicon content forms a stable protective scale layer • Enhanced anti-scaling performance – Withstands prolonged exposure to oxidizing environments up to 1150°C • Outer bend protection – Shields the most exposed section of U-bend tubes from erosion, slag, and thermal impact • Precision fitment – Custom-made to match tube radius and diameter for secure, rattle-free installation • Easy to install – Secured by clamps, stainless steel bands, or tack welding without disassembling the system • Long operational lifespan – Reduces tube wear and replacement frequency in aggressive thermal service conditions Applications • power generation – Used on U-bend outer arcs in superheaters and reheaters for oxidation and slag protection • petrochemical plants – Shields tube bends in reformers and high-temperature heaters exposed to process gas erosion • waste heat recovery boilers – Installed in WHRBs and HRSGs operating under fluctuating temperatures and gas flow • cement and metallurgy industries – Protects curved tubes and heat exchanger bends exposed to high-temperature dust and gas streams • furnace and incineration systems – Applied to outer arcs in radiant coils subjected to direct flame and extreme heat Conclusion The 1Cr25Ni20Si2 U Type Outer Half Round Tube Shield by Ladhani Metal Corporation—manufacturer, supplier, and exporter—is a high-performance shielding component designed for the most demanding high-temperature industrial environments. With its superior oxidation resistance, scale protection, and thermal fatigue strength, it provides lasting protection to U-bend tubes in boilers, furnaces, and heat exchangers across the power, petrochemical, and metallurgical sectors. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered components used to protect boiler and heat exchanger tubes from erosion, scaling, and high-temperature corrosion. These shields are widely applied in industrial systems exposed to thermal cycling, aggressive gases, and particulate flow. Their half-round shape allows for simple and secure installation over straight or curved tube surfaces, extending tube life and reducing maintenance needs. 1Cr18Ni9Ti U Type Half Round Tube Shield The 1Cr18Ni9Ti U Type Half Round Tube Shield is specifically designed for protection of U-bend tube sections in high-temperature heat exchangers, boilers, and superheaters. Manufactured from 1Cr18Ni9Ti, a titanium-stabilized austenitic stainless steel equivalent to AISI 321, this shield delivers excellent resistance to intergranular corrosion, high-temperature oxidation, and thermal fatigue. The titanium addition prevents chromium carbide precipitation during welding or long-term heat exposure, making it ideal for use in welded structures subjected to continuous heating cycles. • Outer U Type Half Round Tube Shield – Provides robust protection to the outer curve of U-bends against hot gas erosion, flame impingement, and scaling. • Inner U Type Half Round Tube Shield – Safeguards the inner arc of the bend from localized wear, slag buildup, and thermal degradation. Ladhani Metal Corporation manufactures and exports 1Cr18Ni9Ti U Type Half Round Tube Shields to industries requiring high-performance shielding in aggressive thermal and chemical service environments, particularly where welding is involved. Chemical Composition of 1Cr18Ni9Ti – Titanium-Stabilized Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 17.0 – 19.0% • Nickel (Ni): 8.0 – 11.0% • Titanium (Ti): ≥ 5 × C content • Iron (Fe): Balance Applications: Suitable for high-temperature environments where welded tube systems are exposed to flue gases, thermal cycling, and corrosive atmospheres. Uses • Protection of U-bend tubes in reheaters and superheaters in thermal power plants • Shielding tube bends in waste heat recovery boilers and steam reformers • Coverage for curved tubes in high-temperature chemical process equipment • Guarding return bends in condensers and evaporators subject to scaling and oxidation • Ideal for systems requiring welded tube shields with resistance to intergranular corrosion Features • Titanium stabilization – Prevents sensitization and intergranular corrosion in welded or heat-affected zones, ensuring long-term structural reliability. • Excellent high-temperature resistance – Performs reliably under continuous thermal exposure, resisting scaling and surface degradation. • Complete bend protection – Available in both inner and outer U-type configurations for full shielding of curved tube areas. • Tight fit and customization – Manufactured to precise dimensions matching tube radius and diameter for secure, stable installation. • Easy to mount – Designed for hassle-free installation using clamps, tack welding, or banding without requiring tube removal. • Versatile performance – Suitable for oxidizing and mildly corrosive environments involving high heat and mechanical stress. Applications • thermal power stations – Protects U-bend tubes in critical heat transfer sections against heat-induced wear and gas corrosion. Enhances operational lifespan and safety. • petrochemical and refinery plants – Used in process heaters, reformers, and exchangers exposed to flue gases and thermal cycling. Maintains performance under continuous operation. • waste heat recovery systems – Shields curved tubes from erosion and scaling in gas recovery units and economizers. Improves durability in high-velocity environments. • chemical industries – Applied to tube bends in reactors, steam heaters, and evaporators where corrosion and temperature resistance are essential. • boiler systems and HRSGs – Provides reliable protection against fatigue, oxidation, and slag accumulation in high-temperature return bends. Conclusion The 1Cr18Ni9Ti U Type Half Round Tube Shield from Ladhani Metal Corporation is an advanced solution for protecting U-bend tube sections in thermally aggressive and welded environments. Its titanium-stabilized composition offers superior resistance to intergranular corrosion, oxidation, and thermal stress. Custom-engineered for precision fit and available in dual-sided configurations, this tube shield enhances system reliability and reduces maintenance needs in power, chemical, and industrial heating systems. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered components used to protect boiler and heat exchanger tubes from erosion, scaling, and high-temperature corrosion. These shields are widely applied in industrial systems exposed to thermal cycling, aggressive gases, and particulate flow. Their half-round shape allows for simple and secure installation over straight or curved tube surfaces, extending tube life and reducing maintenance needs. SS 410 U Type Half Round Tube Shield The SS 410 U Type Half Round Tube Shield is engineered for protective coverage of U-bend sections in heat exchanger coils, superheaters, and boiler return bends. Manufactured from SS 410, a hardenable martensitic stainless steel, this shield provides excellent resistance to abrasion, oxidation, and moderate corrosion. The U-type design offers tailored protection to both inner and outer arcs of tube bends—critical areas vulnerable to erosion, thermal stress, and slag buildup in high-temperature environments. • Outer U Type Half Round Tube Shield – Shields the outer curvature of the bend against high-temperature oxidation, impact wear, and flue gas turbulence. • Inner U Type Half Round Tube Shield – Protects the inner radius from scaling, corrosive gas attack, and localized erosion caused by gas flow irregularities. Ladhani Metal Corporation supplies SS 410 U Type Half Round Tube Shields designed for durability and cost-effectiveness in applications where wear resistance and thermal stability are key performance requirements. Chemical Composition of SS 410 – Martensitic Stainless Steel • Carbon (C): 0.08 – 0.15% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 11.5 – 13.5% • Nickel (Ni): ≤ 0.75% • Iron (Fe): Balance Applications: Ideal for moderate corrosion environments and high-temperature zones where mechanical strength, scaling resistance, and surface hardness are essential. Uses • Shielding U-bend tube sections in power plant superheaters and reheaters • Protection of tube bends in industrial boilers and HRSG return loops • Coverage for high-wear tube areas in WHRBs and economizers • Safeguarding of steam reformer and heat exchanger return curves in refineries • Suitable for dry, high-temperature service conditions with limited corrosive exposure Features • High surface hardness – SS 410 can be heat-treated to improve abrasion and erosion resistance, suitable for high-wear areas. • Oxidation resistance – Performs well in dry air at elevated temperatures, offering effective scaling resistance during continuous heating cycles. • Inner and outer coverage – Available in both configurations for complete U-bend protection, reducing risk of localized tube failure. • Precision fit – Fabricated to exact bend radius and tube diameter for a stable and secure installation. • Easy to install – Can be mounted using clamps, banding, or welding methods without major system modifications. • Economical option – Offers a cost-effective solution for environments where chemical corrosion is minimal but mechanical wear is high. Applications • thermal power plants – Protects U-bend tubes in reheaters and superheaters from oxidation, slag deposits, and particulate erosion. Improves thermal zone durability. • chemical and fertilizer industries – Installed in systems where temperature resistance is more critical than corrosion protection. Helps extend tube service life under cyclic heat conditions. • waste heat recovery units – Shields return bends in WHRBs and economizers exposed to hot gas streams and turbulent flow. • refinery and process heaters – Used in units with limited corrosive exposure where surface scaling and impact wear are primary concerns. • cement and metallurgical plants – Ideal for steam and gas heating lines where wear resistance at elevated temperatures is essential. Conclusion The SS 410 U Type Half Round Tube Shield from Ladhani Metal Corporation provides reliable and economical protection for U-bend tubes in heat-intensive, erosion-prone environments. With its martensitic structure and good thermal resistance, SS 410 is well-suited for applications where mechanical wear, oxidation, and surface degradation are key operational challenges. Customizable in size and bend radius, these shields deliver cost-efficient, high-performance solutions for extending tube life and reducing unplanned maintenance. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation.