DIN 2627 Carbon Steel flanges PN 400 are high-strength blind flanges designed for use in high-pressure applications across a wide range of industrial systems. Manufactured in accordance with the DIN 2627 standard, these flanges are primarily used to isolate piping systems by sealing off the end of a pipeline or vessel opening. The PN 400 pressure rating (400 bar / 5800 psi) ensures reliable performance under intense pressure and mechanical stress. Carbon steel flanges offer excellent tensile strength, impact resistance, and structural integrity, making them a cost-effective solution for systems where corrosion resistance is not the primary concern. Typically used in applications involving water, steam, oil, and gas, DIN 2627 carbon steel blind flanges are well-suited for power plants, refineries, petrochemical facilities, and general industrial systems. Ladhani Metal Corporation is a trusted global manufacturer and exporter of carbon steel flanges, producing components that meet rigorous international standards for material quality, dimensional accuracy, and pressure containment. Pressure Rating: • PN 400 (400 bar / 5800 psi): Suitable for extremely high-pressure systems in industrial pipelines and mechanical installations. Flange Type: • Blind Flanges Solid, non-bored flanges used to terminate flow or provide system isolation. Commonly used for pressure testing, maintenance access, and future expansion. • Flat Face (FF) Flanges Flat sealing surfaces designed for use with full-face gaskets and flat-faced mating flanges. Promotes even bolt loading and effective sealing under high-pressure conditions. Carbon Steel Grades and Composition: ASTM A105 (Forged Carbon Steel) • Carbon (C): ≤ 0.35% • Manganese (Mn): 0.60 – 1.05% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.040% • Silicon (Si): 0.10 – 0.35% Applications: Commonly used for high-temperature and high-pressure systems. Ideal for oil and gas, steam, and hydraulic systems. ASTM A350 LF2 (Low-Temperature Carbon Steel) • Carbon (C): ≤ 0.30% • Manganese (Mn): 0.60 – 1.35% • Silicon (Si): 0.15 – 0.30% • Nickel (Ni): ≤ 1.0% Applications: Suitable for sub-zero temperature services such as cryogenic systems, LNG processing, and cold-weather pipelines. Applications of DIN 2627 Carbon Steel Flanges PN 400: • Oil and Gas Transmission Lines Used in pipeline systems and refineries handling hydrocarbons under high pressure. • Steam and Power Generation Plants Ideal for high-pressure steam lines, condensate systems, and boiler feedwater applications. • Petrochemical and Chemical Industries Suitable for handling neutral and non-aggressive chemical fluids and process gases. • Water Treatment and Pumping Stations Used in high-pressure water systems, including pumping stations, pressure regulators, and testing units. • Heating, Ventilation, and Air Conditioning (HVAC) Employed in high-pressure chilled water and steam systems for industrial facilities. • General Manufacturing and Engineering Systems Reliable for structural piping systems in factories and mechanical installations. Key Features: • Compliant with DIN 2627 specifications • PN 400 pressure rating for ultra-high-pressure systems • Blind flange design allows for system isolation and pressure containment • Flat face design compatible with full-face gaskets and flat mating surfaces • Manufactured from forged carbon steels like ASTM A105 and A350 LF2 • Excellent strength, ductility, and impact resistance • Economical and durable for non-corrosive environments • Widely used across oil and gas, power, chemical, and water treatment sectors • Custom sizes, pressure classes, surface coatings, and face types available upon request Conclusion: DIN 2627 Carbon Steel Flanges PN 400 from Ladhani Metal Corporation are engineered for high-performance applications requiring strength, pressure retention, and reliability in demanding industrial environments. Whether used in power plants, oil pipelines, or steam systems, these flanges provide durable and cost-effective sealing for critical operations. Contact Ladhani Metal Corporation for product specifications, technical support, or custom solutions tailored to your piping system requirements.

DIN 2576 Carbon Steel Flanges PN 10 are slip-on type flanges manufactured in accordance with the DIN 2576 standard, suitable for piping systems operating under low to moderate pressures. Made from high-quality carbon steel, these flanges offer good mechanical strength and are cost-effective solutions for a wide range of industrial applications where corrosion resistance is not the primary concern. The slip-on design allows easy fitting over the pipe and facilitates welding on both the inner and outer edges, ensuring reliable and leak-proof connections. Ladhani Metal Corporation is a reputed manufacturer and global supplier of carbon steel flanges, delivering components that comply with international quality and dimensional standards. DIN 2576 carbon steel flanges are widely used in general-purpose piping systems across industries such as oil and gas, power generation, HVAC, water treatment, and process industries. Pressure Rating: • PN 10 (10 bar / 145 psi): Suitable for use in low to medium pressure systems with stable operational demands. Flange Types: • Slip-On Flanges These flanges slide over the pipe end and are welded on both sides, allowing for simple installation and strong mechanical joints. • Flat Face (FF) Flanges Designed to mate with flat gaskets and flat surfaces, suitable for systems involving cast iron or non-metallic components. Carbon Steel Grades and Composition: Common Grades: • ASTM A105 (Forged Carbon Steel) • ASTM A516 Grade 70 (Pressure Vessel Quality Steel) • IS 2062 (Structural Carbon Steel) Typical Composition (ASTM A105): • Carbon (C): 0.35% max • Manganese (Mn): 0.60 – 1.05% • Phosphorus (P): 0.035% max • Sulfur (S): 0.040% max • Silicon (Si): 0.10 – 0.35% Applications: DIN 2576 carbon steel flanges are preferred in systems where high strength is required and the risk of corrosion is minimal or controlled through external protection (e.g., coatings or linings). Common applications include: • Oil and Gas Transmission Used in pipelines and flowlines where moderate pressures are involved. • Power Plants Suitable for steam, water, and air systems in thermal and hydroelectric power stations. • Water Treatment and Distribution Employed in clean water and wastewater systems, including pumping stations and storage tanks. • HVAC Systems Utilized in heating, ventilation, and air conditioning ducting and piping. • Chemical and Petrochemical Applied in non-corrosive fluid handling and auxiliary systems. • Structural and Fabrication Works Used in non-pressure retaining structural supports and frames. Key Features: • Manufactured to DIN 2576 standards • PN 10 pressure rating for medium-duty applications • Cost-effective and mechanically strong • Available in a variety of carbon steel grades • Slip-on design offers ease of installation and alignment • Flat face design compatible with flat gaskets and soft materials • Ideal for industrial sectors with controlled or minimal corrosion environments • Custom drilling, dimensions, and surface treatments available Conclusion: DIN 2576 Carbon Steel Flanges PN 10 by Ladhani Metal Corporation offer a practical and economical solution for low to moderate pressure piping systems. With reliable performance, ease of installation, and availability in various carbon steel grades, these flanges are suited for a broad range of applications in power, water, oil and gas, and infrastructure industries. For detailed specifications, material compatibility, or project-based orders, contact Ladhani Metal Corporation today.

DIN 2573 Stainless Steel Flanges PN 6 are precision-manufactured flat flanges made from high-grade stainless steel, designed for low-pressure applications across a broad range of industrial sectors. Compliant with DIN 2573 standards, these flanges provide excellent corrosion resistance, mechanical reliability, and compatibility with standard piping systems. They are commonly used in non-critical, low-pressure environments in industries such as water treatment, HVAC, food processing, and general utility piping systems. Ladhani Metal Corporation is a reputable manufacturer and exporter of stainless steel flanges, offering components that adhere to international quality benchmarks. The flat flange design simplifies assembly and disassembly, making these flanges a practical choice for systems requiring easy maintenance and reliable sealing at lower pressure ranges. Pressure Rating: • PN 6 (6 bar / 87 psi): Engineered for low-pressure systems where moderate sealing performance and corrosion resistance are essential. Flange Types: • Plate Flanges Used in low-pressure piping systems for simple bolted connections with gaskets. • Flat Face (FF) Flanges Ideal for use with cast iron equipment or non-metallic gaskets to ensure uniform surface contact. • Slip-On Flanges Designed for ease of installation by sliding over the pipe and welding both sides for moderate sealing. • Custom-Machined Flanges Available in specific dimensions and stainless steel grades as per customer specifications and operational requirements. Stainless Steel Grades and Composition: 1. 304 (Austenitic Stainless Steel) Composition: • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 11.0% Applications: Used in water supply lines, food-grade piping, and low-pressure process lines due to its hygienic properties and corrosion resistance. 2. 316 (Molybdenum-Alloyed Stainless Steel) Composition: • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% Applications: Suited for mildly corrosive environments including water filtration systems and food-grade tanks. 3. 321 (Titanium-Stabilized Stainless Steel) Composition: • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 17.0 – 19.0% • Nickel (Ni): 9.0 – 12.0% • Titanium (Ti): ≥ 5x(C+N) Applications: Applicable in moderately high temperatures or where intergranular corrosion resistance is important, such as thermal pipelines and heating systems. Applications of DIN 2573 Stainless Steel Flanges: • Water Distribution and Treatment Systems: Used in potable and waste water systems, ensuring non-reactive and rust-resistant performance. • HVAC and Building Installations: Employed in air ducts, chilled water lines, and other HVAC components where low-pressure performance is sufficient. • Food and Beverage Processing: Chosen for hygienic piping setups in non-pressurized fluid transfer applications. • Industrial Utility Lines: Integrated into auxiliary piping systems for lubricants, cooling water, and drainage. • Agricultural and Irrigation Systems: Used in low-pressure pumping and irrigation lines due to their corrosion resistance and ease of installation. Key Features: • Manufactured in compliance with DIN 2573 standard • PN 6 pressure rating suitable for non-critical systems • Excellent corrosion resistance with hygienic surface options • Flat and slip-on configurations for simplified assembly • Available in 304, 316, 321, and other stainless steel grades Conclusion: DIN 2573 Stainless Steel Flanges PN 6 by Ladhani Metal Corporation offer a cost-effective and reliable solution for low-pressure applications. Their corrosion-resistant material, ease of installation, and compliance with international standards make them ideal for various general-purpose industrial systems. For tailored configurations, specific material grades, or technical support, contact Ladhani Metal Corporation.