Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered components designed to protect the outer surfaces of boiler tubes, heat exchangers, and industrial piping systems from erosion, scale formation, and thermal fatigue. These shields play a crucial role in minimizing tube failure and improving overall equipment reliability in high-temperature and particulate-laden environments. SS 430 Half Round Tube Shield The SS 430 Half Round Tube Shield is a semi-cylindrical cladding made from ferritic stainless steel grade 430. With good corrosion resistance, excellent oxidation resistance, and superior thermal conductivity, SS 430 is well suited for non-pressurized or moderately corrosive environments. It is particularly effective in flue gas paths and air preheaters where thermal stress and ash erosion can degrade exposed tubes. The half-round geometry ensures easy, secure installation and a consistent protective barrier around the tube's surface, enhancing durability without interfering with system function. Chemical Composition of SS 430 – Ferritic Stainless Steel • Carbon (C): ≤ 0.12% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): ≤ 0.75% • Iron (Fe): Balance Uses • Boiler Tube Surface Protection – Shields tubes in low to moderate temperature zones from flue gas corrosion, ash abrasion, and thermal scaling. • Air Preheater Tubing – Guards against dust erosion in regenerative air preheaters and gas-to-air heat transfer zones. • Economizer Tube Protection – Used in downstream sections of boilers where lower temperatures allow for effective use of ferritic steels. • Steam Line Shields – Protects low-pressure steam tubing and condensate lines in systems not requiring austenitic stainless steel grades. • Heat Exchanger Outer Shells – Provides an extra layer of protection in air-cooled or shell-side applications exposed to mechanical wear. Features • Good Oxidation Resistance – Performs reliably in oxidizing conditions up to 815°C, ideal for flue gas exposure and dry ash environments. • Ferritic Structure – Offers better thermal conductivity and resistance to thermal expansion than austenitic grades, reducing distortion risk. • Corrosion Resistance – Resists corrosion from atmospheric moisture, flue gas condensates, and other mildly aggressive compounds. • Cost-Effective – Offers an economical alternative to higher alloy stainless steels in appropriate thermal zones. • Precision Fit – Half-round design enables quick installation and conforms closely to tube diameters for optimal protection. • Surface Finish Options – Supplied in bright annealed, pickled, or passivated finishes based on operational requirements. • Custom Fabrication – Available in a range of wall thicknesses, diameters, and lengths to meet plant-specific installation demands. Applications • Thermal Power Stations – Shields economizer and air preheater tubes from dust-laden exhaust gas erosion and moderate thermal stress. • Cement and Lime Kilns – Used to protect heat recovery and cooler tubes from dry ash abrasion in hot air ducts. • Food Processing Boilers – Applied in steam systems requiring corrosion resistance and thermal control under hygienic conditions. • HVAC and Utility Boilers – Installed in auxiliary boilers where conditions do not require high-alloy materials but demand durability. • Pulp and Paper Mills – Protects lower furnace zone tubes and stack-side economizers from condensate corrosion and soot accumulation. • Sugar and Distillery Plants – Guards process steam and heat recovery tubes from ash and scale in biomass and bagasse-fired units. Conclusion The SS 430 Half Round Tube Shield by Ladhani Metal Corporation is a durable, cost-efficient solution for protecting tubing systems in environments where moderate corrosion resistance, good oxidation behavior, and thermal stability are essential. It is best suited for dry, low to mid-temperature gas flow areas where the mechanical and thermal loads are not extreme. The ferritic stainless steel structure provides a favorable balance of performance and economy, particularly in large-scale power and process plants. With precision manufacturing, tailored dimensions, and reliable service, Ladhani Metal Corporation delivers proven tube protection technology trusted across multiple industries. For custom orders, sizing assistance, or to request a technical quote, please contact Ladhani Metal Corporation.

DIN 2566 Inconel flanges PN 16 are engineered for high-performance, medium-pressure piping systems exposed to extreme temperatures, corrosive chemicals, and high mechanical stress. Manufactured in compliance with DIN 2566 standards, these threaded flanges provide a secure, weld-free connection ideal for critical applications in challenging industrial environments. Ladhani Metal Corporation is a leading manufacturer and global exporter of Inconel flanges, offering precision-crafted products with superior resistance to heat, oxidation, and corrosive media. DIN 2566 Inconel flanges are trusted across industries such as aerospace, chemical processing, marine, thermal power, and nuclear energy. Flange Types: • Threaded (Screwed) Flanges: Allow for fast assembly and disassembly without welding, ideal for systems requiring frequent maintenance. • Raised Face (RF) Flanges: Enhances sealing performance by concentrating gasket pressure at the sealing surface. • Flat Face (FF) Flanges: Typically used with flat-faced equipment and non-metallic piping systems under moderate pressure. • Forged Threaded Flanges: Forged for improved mechanical properties, dimensional accuracy, and long-term reliability. • Custom-Machined Flanges: Available on request in custom dimensions, pressure classes, and material combinations. Available Inconel Grades and Composition: 1. Inconel 600 (UNS N06600) • Nickel (Ni): ≥ 72% • Chromium (Cr): 14.0 – 17.0% • Iron (Fe): 6.0 – 10.0% • Excellent resistance to oxidation, corrosion, and high temperatures. Applications: Furnace components, heat exchangers, food processing, and chemical vessels. 2. Inconel 625 (UNS N06625) • Nickel (Ni): ≥ 58% • Chromium (Cr): 20.0 – 23.0% • Molybdenum (Mo): 8.0 – 10.0% • Niobium + Tantalum (Nb + Ta): 3.15 – 4.15% • Superior resistance to seawater, acidic environments, and high mechanical stress. Applications: Marine systems, offshore platforms, exhaust systems, and chemical plant components. 3. Inconel 718 (UNS N07718) • Nickel (Ni): 50.0 – 55.0% • Chromium (Cr): 17.0 – 21.0% • Iron (Fe): Balance • Niobium + Tantalum (Nb + Ta): 4.75 – 5.5% • Molybdenum (Mo): 2.8 – 3.3% • Excellent high-temperature strength, creep resistance, and fatigue resistance. Applications: Aerospace turbines, nuclear reactors, high-speed rotating components, and pressure vessels. Applications of DIN 2566 Inconel Flanges: • Aerospace and Jet Engines: High-temperature, high-stress components • Petrochemical and Chemical Processing: Resistant to aggressive acids and solvents • Marine and Subsea Engineering: Excellent in chloride-rich and saltwater environments • Power Generation: Used in nuclear, geothermal, and thermal power systems • High-Performance Exhaust and Heat Systems: Reliable under thermal cycling and oxidation Key Features: • Manufactured to DIN 2566 standard with PN 16 pressure rating • Exceptional resistance to oxidation, pitting, and chemical corrosion • Outstanding performance under thermal stress and cyclic loading • Threaded design allows for easy, weld-free installation • High tensile and creep strength, especially at elevated temperatures • Supplied with complete MTCs, inspection reports, and full traceability Conclusion: DIN 2566 Inconel flanges PN 16 from Ladhani Metal Corporation are built to handle the most demanding operating conditions in high-temperature and corrosive environments. With premium-grade materials like Inconel 600, 625, and 718, these flanges offer unmatched durability, thermal stability, and corrosion resistance. For technical support, custom orders, or large-scale procurement, contact Ladhani Metal Corporation today.

DIN 2527 is a German standard for flanges, and it specifies the design, dimensions, and tolerances for blind flanges made of stainless steel 304. These flanges are commonly used in piping systems to seal the end of a pipe, creating a closed-off section. Here’s a detailed description: DIN 2527 Stainless Steel 304 Blind Flanges Material: Stainless Steel 304: This is an austenitic grade of stainless steel known for its excellent corrosion resistance, particularly against atmospheric, chemical, and other harsh environments. Stainless steel 304 is also known for its good weldability, formability, and strength, making it an ideal material for flanges used in a variety of industries, including chemical, food processing, and construction. Design and Dimensions: Shape: Blind flanges are flat, circular plates with no center hole, designed to seal the end of a pipeline or vessel. Bolt Holes: These flanges are designed to match the corresponding pipe flange with holes to align with the bolts that will attach them to other flanged components. The bolt holes are usually equally spaced around the perimeter. Thickness: The thickness of DIN 2527 blind flanges varies depending on the pressure rating and the size of the flange. This thickness is essential for the flange to withstand internal pressure and provide a secure seal. Pressure Rating: These flanges are rated according to pressure classes such as PN 6, PN 10, PN 16, PN 25, etc. The rating determines the maximum pressure the flange can safely handle without failure. Applications: Pipeline Sealing: Primarily used to seal the open end of a pipeline or system to prevent leaks and maintain pressure in a closed system. System Isolation: Used when isolating a section of the system for maintenance or modification, as they allow for the easy disconnection of parts. Pressure Containment: In applications where maintaining pressure is essential, a DIN 2527 blind flange provides a tight seal that can withstand varying levels of internal pressure. Features: Corrosion Resistance: As the flange is made of stainless steel 304, it offers excellent resistance to corrosion, even in moderately acidic or alkaline environments. Temperature Resistance: Stainless steel 304 can withstand high temperatures, making it suitable for use in elevated temperature environments. Durability: Stainless steel 304 has excellent strength and durability, ensuring a long service life with minimal wear or corrosion. Types of Blind Flanges in DIN 2527: Raised Face: The face of the flange is slightly raised to create a better seal when mated with the gasket. Flat Face: The face is level with the rest of the flange surface and is generally used with softer gaskets to create the seal. Ring Type Joint (RTJ): Some blind flanges may also come with a grooved surface designed for use with metallic gaskets that provide a more secure, high-pressure seal. These DIN 2527 stainless steel 304 blind flanges are essential components in many piping systems, offering a reliable, durable, and efficient way to seal and isolate sections of the pipeline.

Material: Gr1, Gr2, Gr5, Gr7, Gr12 etc. OD: 150-2500mm Thickness: 30-250mm Production Methods: Forging,annealing and machining Packing: Plywood box Gr1 Titanium Tubesheet Product Description The precision of titanium tubesheet processing, especially the tube hole spacing and tube diameter tolerance, verticality, and smoothness greatly affect the assembly and use performance of the chemical equipment listed above. With the enlargement of chemical equipment and power stations, titanium tubesheet diameter has become larger and larger, and titanium tubesheets with a diameter of 4m-5m are very common. The characteristics of the large-scale tubesheet are the large number of tube holes, denseness, small diameter, deepness, high precision and smoothness requirements

Porduct name : Gr 1 Titanium Tube Sheet Material: Gr1 Titanium +steel,Gr1 Titanium+stainless steel etc. Size &Standard: As per client drawing Production Method: Forging,annealing and machining Advantage: Excellent corrosion resistance ability Packing: Plywood case Application: Heat Exchanger, chemical equipment, Pressure Vessel, filter devices, etc. Gr 1 Titanium Tube Sheet U-shaped expansion joint is commonly used in fixed tubesheet heat exchanger. It has the advantages of compact and simple structure, good compensation and low price. With the large-scale of chemical equipment and power stations, the diameter of tubesheet is becoming larger and larger. Tubesheet with diameter of 4m-5m is very common. Large tubesheet is characterized by large number of tube holes, dense, small diameter, deep, high precision and finish requirements.

Quality Standard Material No. Old designation DC01 DIN EN 10130 1.0330 ST 12-03 Cold-rolled flat steel DC01, according to the standards DIN EN 10130 and DIN EN 10152 Cold-rolled flat steel DC01 is a widely used material in the industrial sector, which is used for various applications in the cold forming process due to its excellent properties. The standards DIN EN 10130 and DIN EN 10152 are decisive for ensuring the quality and requirements of this material. DC01 according to the DIN EN 10130 standard The DIN EN 10130 standard defines the requirements for cold-rolled flat products made of unalloyed quality steels that are used in the cold forming process. Technical delivery conditions DIN EN 10130 specifies the technical delivery conditions for cold-rolled flat steel. These include the chemical composition, mechanical properties and surface quality. The standard ensures that the products supplied meet the required standards in order to guarantee workability and final quality. Chemical composition The chemical composition of the steel is decisive for its properties and is described in detail in DIN EN 10130. For DC01, the maximum carbon content is 0.12%, while the manganese and phosphorus content is also subject to specific limits. This composition ensures good cold formability and a high surface quality. Mechanical properties DC01 in accordance with DIN EN 10130 has specific mechanical properties that make it ideal for cold forming. These include a minimum tensile strength of 270-410 MPa and a minimum elongation of 28%. These properties allow the steel to be processed into complex shapes without cracking or breaking. Surface quality The surface quality is another aspect of DIN EN 10130. DC01 can be supplied in different surface finishes, such as smooth or matt. These variations allow adaptation to specific requirements of the end application, be it for decorative purposes or further coating processes. DC01+ZE according to the DIN EN 10152 standard The DIN EN 10152 standard extends the requirements of DIN EN 10130 to include specific conditions for electrolytically galvanized products. This standard is crucial for applications in which corrosion protection plays an important role. Technical delivery conditions DIN EN 10152 specifies the technical delivery conditions for electrolytically galvanized, cold-rolled flat products. In addition to the chemical composition and mechanical properties, these conditions also include the specific requirements for the zinc coating. Chemical composition and zinc coating The chemical composition of the base material DC01 generally remains unchanged, but an additional electrolytic zinc coating is applied. This coating is used for corrosion protection and varies in thickness depending on the specific requirements of the application. The standard provides detailed specifications for the thickness and uniformity of the zinc coating to ensure optimum protection. Mechanical properties Even with galvanized products, the mechanical properties of the base material are largely retained. The standard ensures that the cold formability and strength of the steel are not impaired despite the additional coating. Corrosion resistance and surface quality One of the main advantages of products manufactured in accordance with DIN EN 10152 is their improved corrosion resistance. Electrolytic galvanizing protects the steel from rust and thus increases the service life of the end product. The surface quality also plays a decisive role here and can be supplied in various finishes, such as smooth or textured. Conclusion Cold-rolled flat steel DC01, produced in accordance with the DIN EN 10130 and DIN EN 10152 standards, offers a number of advantages for applications in the cold forming process. While DIN EN 10130 defines the basic requirements for chemical composition, mechanical properties and surface quality, DIN EN 10152 extends these specifications to include specific conditions for electrolytically galvanized products that offer additional corrosion protection. Both standards together ensure that DC01 is a versatile material with high quality and durability. FOR EN 10130 DC01 CHEMICAL , MECHANICAL DATA SHEET KINDLY VISIT https://www.ladhanimetal.in/page/en-10130-2006-chemical-and-mechanical-composition/689c322d2e585e299cb43798 https://www.ladhanimetal.in/page/en-10130-cold-rolled-flat-sheet-plate-coil-data-sheet-equivalent-grade-and-chemical-and-mechanical-properties/68a45503fc14472bb274df32

Ladhani Metal Corporation offers 1Cr25Ni20Si2 Boiler Half Round Tube Shields engineered for superior protection of boiler tubes in extremely high-temperature and abrasive service environments. Manufactured from a heat-resistant austenitic stainless steel alloy with high chromium, nickel, and silicon content, 1Cr25Ni20Si2 delivers exceptional resistance to oxidation, carburization, and high-temperature scaling. The added silicon improves anti-oxidation properties and enhances structural stability during prolonged thermal exposure. These shields are precision-formed into a half-round profile to ensure accurate coverage of straight boiler tube sections. They provide a durable physical barrier against flue gas erosion, soot blower impact, and particle-laden gas flow, significantly extending the operational life of boiler tubes. Ladhani Metal Corporation manufactures, supplies, and exports 1Cr25Ni20Si2 Boiler Half Round Tube Shields in a wide range of sizes, thicknesses, and lengths, catering to both domestic and international markets. 1Cr25Ni20Si2 Grade Chemical Composition – Heat Resistant Austenitic Stainless Steel • Carbon (C): ≤ 0.12% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): 1.50 – 2.50% • Chromium (Cr): 24.00 – 26.00% • Nickel (Ni): 19.00 – 22.00% • Iron (Fe): Balance Uses • Shields straight boiler tubes in superheaters, reheaters, and economizers • Protects against oxidation, scaling, and particulate erosion • Suitable for carburizing and high-silicon demanding environments • Extends tube life in power generation and process heating units Features • Enhanced oxidation resistance – Silicon addition boosts scale resistance at extreme temperatures • Superior thermal stability – Maintains mechanical integrity during prolonged heat exposure • Precision-engineered profile – Ensures a secure and accurate fit over boiler tubes • Flexible installation – Can be welded, clamped, or banded based on site requirements • Export-ready – Compliant with international quality and dimensional standards Applications • Thermal power stations – Protects superheater and reheater tubes from oxidation and erosion • Waste heat boilers – Guards tubes in severe heat recovery operations • Petrochemical and refinery heaters – Resists carburization in furnace conditions • Metallurgy and cement industries – Provides reliable tube protection under abrasive, high-heat gas flows Conclusion The 1Cr25Ni20Si2 Boiler Half Round Tube Shield from Ladhani Metal Corporation is designed for extreme service conditions where oxidation, scaling, and high-temperature wear are major concerns. With its silicon-enhanced heat-resistant alloy composition and precise manufacturing, it ensures prolonged boiler tube life and reduced downtime. Available in customized sizes for both domestic and export orders, these shields offer dependable performance in the world’s toughest boiler and furnace environments. For specifications and order inquiries, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield

Ladhani Metal Corporation offers SS 304 Boiler Tube Shields engineered to protect straight boiler and heat exchanger tubes from erosion, oxidation, and impact damage in aggressive thermal environments. Manufactured from austenitic stainless steel grade SS 304, these shields provide excellent corrosion resistance, good mechanical strength, and thermal stability at high operating temperatures. SS 304 is widely used in applications where exposure to flue gases, steam, and particulate matter demands reliable, long-term protection. The half-round design is precision-formed to match the curvature of straight boiler tubes, ensuring a snug and secure fit. This close contact minimizes tube exposure to abrasive particles, high-velocity gases, and soot blower impact. The shields serve as a durable physical barrier, extending tube life and reducing the frequency of costly maintenance and replacements. Ladhani Metal Corporation manufactures, supplies, and exports SS 304 Boiler Tube Shields in a variety of lengths, diameters, and thicknesses to suit specific application requirements across domestic and international markets. SS 304 Grade Chemical Composition – Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 10.5% • Iron (Fe): Balance Applications: Suitable for thermal power stations, process heaters, WHRBs, HRSGs, and chemical industries operating under corrosive and high-heat environments. Uses • Protection of straight boiler tubes from erosion and oxidation • Installed in radiant and convection zones of boilers • Shields against soot blower damage in utility boilers • Used in HRSG and WHRB systems exposed to flue gases • Ideal for chemical, food, and textile processing boilers Features • Excellent corrosion resistance – Performs in oxidizing and mildly acidic environments • High thermal durability – Maintains strength at elevated temperatures • Long service life – Minimizes wear and reduces maintenance intervals • Easy to install – Can be clamped, tack welded, or banded • Custom-built – Available in varied lengths, thicknesses, and diameters • Export-ready – Manufactured to meet international standards Applications • Power plants – Steam generator tube protection from scale and erosion • Refineries and petrochemical units – For tube shielding in process heaters • Waste heat recovery systems – In cement, steel, and glass industries • Industrial boilers – Where high temperature and flue gas exposure are present Conclusion The SS 304 Boiler Tube Shield from Ladhani Metal Corporation delivers robust and corrosion-resistant protection for straight tubes exposed to harsh thermal and gaseous environments. With high-grade austenitic stainless steel construction, precise fit, and customizable dimensions, these shields are ideal for domestic and global boiler systems. For technical consultation, material selection, or custom orders, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #halftubeshield #utypehalftubeshield #tubeshieldexporter

Ladhani Metal Corporation offers 1Cr20Ni14Si2 Outer Half Round 90 Degree Bend Tube Shields designed to protect the outer curvature of U-bends and 90-degree tube turns in high-temperature and moderately corrosive service environments. The half-round shields are precision-formed to fit the external radius of return bends, offering direct protection against erosion, scaling, and impact from soot blowing and ash-laden gas flow. 1Cr20Ni14Si2 shields are suitable for use in thermal power stations, waste heat recovery boilers, incinerators, and petrochemical plants operating at elevated temperatures. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of 1Cr20Ni14Si2 Outer Half Round 90 Degree Bend Tube Shields, offering customizable sizes and configurations to meet the demands of varied industrial applications. 1Cr20Ni14Si2 Grade Chemical Composition – Austenitic Heat-Resistant Steel • Carbon (C): ≤ 0.15% • Manganese (Mn): ≤ 1.50% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): 1.50 – 2.50% • Chromium (Cr): 19.0 – 21.0% • Nickel (Ni): 13.0 – 15.0% • Iron (Fe): Balance Uses • Protects 90-degree bends in superheater and reheater tubes in power generation systems • Used in WHRBs and HRSGs exposed to oxidizing and dry gas flow • Shields heat exchanger and furnace tubing from scale formation and high-velocity gas erosion • Suitable for return bends in chemical and thermal processing units requiring heat durability Features • High oxidation resistance – Enhanced by silicon for long-term performance at elevated temperatures • Excellent heat stability – Resists deformation, fatigue, and creep during prolonged thermal cycling • Mechanical durability – Maintains structural integrity in harsh operating conditions • Precision-formed fit – Matches tube curvature for optimal surface coverage and protection • Adaptable installation – Can be welded, banded, or clamped to suit on-site assembly methods • Broad availability – Offered in a range of diameters, wall thicknesses, and arc lengths Applications • Thermal power plants – Shields superheater and reheater bends from erosion and surface scaling • Petrochemical and chemical processing – Protects tubing in high-temperature reaction and heating zones • Waste incineration and heat recovery – Guards bends in units subjected to corrosive and abrasive gas streams • Cement and metallurgy industries – Applied in tube shields for high-heat rotary kilns and preheater units Conclusion The 1Cr20Ni14Si2 Outer Half Round 90 Degree Bend Tube Shield by Ladhani Metal Corporation offers dependable protection for tube bends in high-temperature and oxidizing environments. With enhanced thermal and oxidation resistance, these shields extend the life of heat-exposed tubing while maintaining mechanical reliability. For product customization, material selection, or technical specifications, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #halftubeshield #utypehalftubeshield #tubeshieldexporter