DIN 2633 carbon steel flanges PN 16 are reliable weld neck flanges manufactured in compliance with the DIN 2633 standard. Designed for use in medium-pressure piping systems with a pressure rating of up to 16 bar (232 psi), these flanges are fabricated from high-quality carbon steel, providing dependable mechanical strength and ease of fabrication. They are widely utilized in a range of general industrial and utility applications where corrosion resistance demands are moderate. Ladhani Metal Corporation is a globally trusted manufacturer and supplier of carbon steel flanges, recognized for high-precision production, rigorous quality assurance, and strict adherence to international material and dimensional standards. Every flange is tested to ensure consistent performance, mechanical integrity, and compatibility with a variety of piping systems. Pressure Rating: • PN 16 (16 bar / 232 psi): Suitable for medium-pressure systems requiring strong, cost-effective, and durable connections. Flange Type: • Weld Neck Flanges Featuring an extended tapered hub, weld neck flanges help evenly distribute mechanical stress and ensure secure, vibration-resistant joints, particularly effective in systems subject to bending or thermal expansion. • Flat Face (FF) Flanges Ideal for use with soft gaskets or cast iron components, flat face flanges ensure even gasket compression, reducing the risk of flange warping or over-tightening. Carbon Steel Grades and General Composition: Typical Carbon Steel Grade: ASTM A105 (for forged carbon steel flanges) • Carbon (C): 0.35% max • Manganese (Mn): 0.60 – 1.05% • Phosphorus (P): 0.035% max • Sulfur (S): 0.040% max • Silicon (Si): 0.10 – 0.35% • Iron (Fe): Balance Applications: Carbon steel flanges to DIN 2633 PN 16 are widely applied in environments where corrosion resistance is not the primary concern but where mechanical strength, weldability, and cost-efficiency are essential. Applications of DIN 2633 Carbon Steel Flanges PN 16: • Power Plants Used in steam, water, and air systems for medium-pressure operations. • Water Treatment and Distribution Well-suited for water mains, treatment facilities, and irrigation networks where strength and reliability are critical. • Petrochemical and Refining Industries Employed in non-corrosive process piping, utility lines, and support systems. • HVAC and Fire Protection Systems Ideal for chilled water, fire suppression, and compressed air applications. • General Industrial Manufacturing Used in structural piping systems and mechanical infrastructure with stable temperature and pressure conditions. Key Features: • Manufactured to DIN 2633 specifications • PN 16 pressure rating for medium-duty service • Weld neck configuration provides robust, leak-resistant connections • Cost-effective and easy to fabricate and install • Excellent machinability and weldability • Available in various sizes and configurations • Coating and corrosion protection options available upon request Conclusion: DIN 2633 carbon steel flanges PN 16 from Ladhani Metal Corporation are engineered for dependable performance in standard industrial environments. With proven strength, versatility, and affordability, these flanges are a reliable choice for water, steam, gas, and general utility applications. For detailed technical specifications, custom options, or pricing inquiries, contact Ladhani Metal Corporation today.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are specially designed components used to protect boiler and heat exchanger tubes from erosion, wear, and high-temperature damage. Manufactured with precision and expertise, these shields enhance tube life, reduce maintenance requirements, and support efficient operation in high-performance industrial systems. The half-round design enables quick installation and provides effective coverage for vulnerable tube surfaces. SS 304 U Type Half Round Tube Shield The SS 304 U Type Half Round Tube Shield is a specially fabricated, semi-circular tube protection device designed to fit around both the curved (U-bend) and straight sections of heat exchanger and boiler tubes. Constructed from premium-grade stainless steel 304, it offers exceptional resistance to corrosion, oxidation, and mechanical wear. Its U-shaped configuration ensures continuous protection along the bend radius, where erosion, thermal stress, and ash impingement are most intense. This shield is available in both inner and outer configurations to ensure full tube coverage. • Outer U Type Half Round Tube Shield – Shields the external curve of U-bend tubes from flame impingement, heat radiation, and gas flow abrasion. • Inner U Type Half Round Tube Shield – Protects the internal arc of the U-bend from turbulence, corrosion, and localized thermal impact. Ladhani Metal Corporation is a leading manufacturer and exporter of SS 304 U Type Half Round Tube Shields, offering high-quality and custom-engineered solutions to meet the demanding requirements of global industries. Chemical Composition of SS 304 – Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 10.5% • Iron (Fe): Balance Applications: Ideal for use in thermal power systems, steam generation units, and petrochemical processing where tube bends are subject to extreme heat, corrosion, or flow-related erosion. Uses • Protection of U-bend sections in superheaters, reheaters, and economizers • Shielding of return bends in heat exchangers exposed to flue gas or high-velocity media • Enhancement of tube durability in HRSG systems and boilers • Erosion prevention in waste heat recovery boilers and furnace zones • Corrosion mitigation in chemical process plant U-tube bundles Features • Material: Manufactured from high-grade SS 304 for superior heat and corrosion resistance • Configuration: Inner and outer U-type shields available for full bend coverage • Design: Formed precisely to match U-bend tube radius for secure, vibration-free fitment • Finish: Bright annealed, pickled, or passivated finishes available (custom finishes on request) • Durability: High mechanical strength and long service life under thermal cycling • Customization: Available in various lengths, thicknesses, and diameters as per project requirements • Easy Installation: Designed for clamping, welding, or banding with minimal tube interference Applications • Thermal power stations and utility boilers • Waste-to-energy systems and HRSGs • Petrochemical refineries and furnace systems • Chemical processing and ammonia plants • Steam-based heat recovery units • Pulp and paper mills with superheater tube networks Conclusion The SS 304 U Type Half Round Tube Shield by Ladhani Metal Corporation offers a reliable and efficient solution for protecting U-bend tube sections in demanding high-temperature and corrosive environments. As a trusted manufacturer and exporter, Ladhani Metal Corporation delivers products that combine durability, precision, and performance. Designed for longevity and ease of installation, these shields help extend tube life and reduce unplanned maintenance. Custom-built to your specifications, our tube shields are a dependable solution for critical tube protection. For technical specifications, customized sizes, or quotation requests, please contact Ladhani Metal Corporation.

DIN 2634 stainless steel flanges PN 25 are precision-engineered weld neck flanges designed and manufactured in accordance with the DIN 2634 standard. These flanges are suitable for high-pressure pipeline systems operating up to 25 bar (362 psi), providing robust and secure connections for a variety of critical industrial applications. Constructed from high-quality stainless steel grades such as 304, 316, and 321, these flanges offer excellent mechanical properties, enhanced corrosion resistance, and dependable performance in aggressive service conditions. Ladhani Metal Corporation is a globally recognized manufacturer and supplier of stainless steel flanges, known for delivering high-precision products that meet stringent international quality and dimensional standards. Each flange undergoes rigorous testing and quality checks to ensure optimal performance, safety, and longevity under high-pressure conditions. Pressure Rating: • PN 25 (25 bar / 362 psi): Engineered for high-pressure environments requiring reinforced flange connections with reliable resistance to corrosion and mechanical stress. Flange Type: • Weld Neck Flanges Incorporating a long tapered hub, weld neck flanges help maintain pipe alignment, reduce stress concentration at the weld joint, and enable smooth fluid flow with minimal turbulence. • Flat Face (FF) Flanges Ideal for systems utilizing soft gaskets or cast components, flat face flanges promote consistent gasket compression and sealing integrity. Stainless Steel Grades and Typical Composition: Stainless Steel 304 • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 10.5% • Carbon (C): ≤ 0.08% (304), ≤ 0.03% (304L) • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Suitable for general-purpose piping systems in environments with moderate corrosion exposure, including potable water and light-duty process lines. Stainless Steel 316 • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% • Carbon (C): ≤ 0.08% (316), ≤ 0.03% (316L) • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Ideal for systems exposed to chlorides, cleaning agents, or other corrosive substances such as in chemical processing, pharmaceuticals, and marine environments. Stainless Steel 321 • Chromium (Cr): 17.0 – 19.0% • Nickel (Ni): 9.0 – 12.0% • Titanium (Ti): ≥ 5 × C (typically 0.20 – 0.70%) • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Frequently used in high-temperature services such as thermal processing equipment, exhaust systems, and heat exchangers due to its stability against intergranular corrosion. Applications of DIN 2634 Stainless Steel Flanges PN 25: • Chemical Processing Units Handles higher operating pressures in systems transporting acids, alkalis, and solvents. • Marine and Offshore Installations Resistant to pressure fluctuations and saltwater corrosion in offshore piping networks. • Pharmaceutical and Biotech Plants Used in clean process environments where both pressure integrity and corrosion resistance are critical. • Industrial Steam and Thermal Systems Suitable for steam distribution and thermal expansion pipelines operating under high pressure. • Power Generation Facilities Applied in turbine piping, heat recovery systems, and pressurized cooling water circuits. Key Features: • Manufactured to DIN 2634 dimensional and pressure specifications • PN 25 pressure rating supports high-pressure operation • Weld neck design ensures leak-tight, stress-resistant connections • Available in stainless steel grades 304, 316, 321 and their low-carbon variants • Superior resistance to high-temperature corrosion and chemical attack • Long-term mechanical strength and fatigue resistance • Custom sizes, finishes, and pressure ratings available upon request Conclusion: DIN 2634 stainless steel flanges PN 25 from Ladhani Metal Corporation are engineered for high-performance use in high-pressure industrial environments where safety, corrosion resistance, and durability are paramount. These flanges are ideal for chemical, marine, thermal, and high-purity applications requiring strong, leak-resistant, and corrosion-resistant connections. For technical support, customized solutions, or pricing details, contact Ladhani Metal Corporation today.

DIN 2576 Stainless Steel Flanges PN 10 are high-quality, slip-on flanges manufactured from corrosion-resistant stainless steel, designed for use in low to medium-pressure piping systems. Produced according to the DIN 2576 standard, these flanges offer reliable sealing, ease of installation, and long-term durability in environments involving water, steam, air, oil, and chemical fluids. The slip-on design allows the flange to slide over the pipe and be welded into place, ensuring accurate alignment and structural integrity in a wide range of industrial applications. Ladhani Metal Corporation is a recognized manufacturer and global exporter of stainless steel flanges, delivering products that meet international quality, dimensional, and performance standards. DIN 2576 flanges provide excellent mechanical strength and corrosion resistance, making them ideal for use in chemical plants, water treatment systems, and general process industries. Pressure Rating: • PN 10 (10 bar / 145 psi): Designed for systems operating under low to moderate pressure, offering dependable performance in industrial fluid and gas transport. Flange Types: • Slip-On Flanges Designed to slip over the pipe and be welded on both the inside and outside, these flanges provide easy installation and solid structural support. • Flat Face (FF) Flanges Used with flat gaskets and flat mating surfaces to ensure even gasket compression and proper load distribution, especially when joining with non-metallic components or cast iron. Stainless Steel Grades and Composition: Stainless Steel 304 (UNS S30400) Composition: • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 10.5% • Carbon (C): ≤ 0.08% • Manganese (Mn), Silicon (Si), Phosphorus (P), Sulfur (S): Trace amounts • Iron (Fe): Balance Applications: 304 stainless steel offers good corrosion resistance, formability, and weldability, making it suitable for applications in food processing, water piping, and light chemical handling. Stainless Steel 316 (UNS S31600) Composition: • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% • Carbon (C): ≤ 0.08% • Iron (Fe): Balance Applications: 316 stainless steel is ideal for more aggressive environments, offering superior resistance to chlorides, acids, and marine exposure. Common applications include chemical plants, pharmaceutical systems, and marine piping. Stainless Steel 321 (UNS S32100) Composition: • Chromium (Cr): 17.0 – 19.0% • Nickel (Ni): 9.0 – 12.0% • Titanium (Ti): ≥ 5x(C) minimum • Carbon (C): ≤ 0.08% • Iron (Fe): Balance Applications: 321 stainless steel is stabilized with titanium to resist intergranular corrosion after welding. It is commonly used in high-temperature applications such as exhaust systems, heat exchangers, furnace parts, and thermal fluid piping in the chemical and petrochemical industries. Applications of DIN 2576 Stainless Steel Flanges: • Chemical and Petrochemical Industries Used in piping systems that handle corrosive chemicals, acids, and solvents, ensuring safe and long-lasting operation. • Water Treatment and Distribution Widely used in pipelines for potable water, wastewater, and desalination plants due to their corrosion resistance and hygienic properties. • Food and Beverage Processing Ideal for sanitary fluid handling systems, where stainless steel ensures contamination-free and easy-to-clean connections. • Marine and Offshore Applications Suitable for piping exposed to seawater and atmospheric corrosion, especially in deck and ballast systems. • General Industrial Use Used in heating systems, compressed air lines, fire protection networks, and process piping. • High-Temperature Services Grade 321 stainless steel is preferred in applications involving thermal cycling and continuous elevated temperatures, such as refinery piping and power plant components. Key Features: • Manufactured according to DIN 2576 standard • PN 10 pressure rating for low to medium-pressure systems • Excellent corrosion resistance and mechanical strength • Available in stainless steel 304, 316, 321, and other grades • Slip-on design ensures easy welding and alignment • Flat face options available for specific gasket and joint requirements • Suitable for chemical, marine, thermal, and general industrial applications • Available in customized sizes, face types, and surface finishes Conclusion: DIN 2576 Stainless Steel Flanges PN 10 from Ladhani Metal Corporation provide reliable, corrosion-resistant performance for a wide range of industrial systems operating under moderate pressure. For technical support, material selection, or custom orders, contact Ladhani Metal Corporation today. 📞 Contact Ladhani Metal Corporation Website: https://www.ladhanimetal.in/ https://www.ladhanimetal.com/ Email: info@ladhanimetals.com Request a Quote: Custom dimensions, materials, and finishes available upon request.

DIN 2573 Stainless Steel Flanges PN 6 are precision-manufactured flat flanges made from high-grade stainless steel, designed for low-pressure applications across a broad range of industrial sectors. Compliant with DIN 2573 standards, these flanges provide excellent corrosion resistance, mechanical reliability, and compatibility with standard piping systems. They are commonly used in non-critical, low-pressure environments in industries such as water treatment, HVAC, food processing, and general utility piping systems. Ladhani Metal Corporation is a reputable manufacturer and exporter of stainless steel flanges, offering components that adhere to international quality benchmarks. The flat flange design simplifies assembly and disassembly, making these flanges a practical choice for systems requiring easy maintenance and reliable sealing at lower pressure ranges. Pressure Rating: • PN 6 (6 bar / 87 psi): Engineered for low-pressure systems where moderate sealing performance and corrosion resistance are essential. Flange Types: • Plate Flanges Used in low-pressure piping systems for simple bolted connections with gaskets. • Flat Face (FF) Flanges Ideal for use with cast iron equipment or non-metallic gaskets to ensure uniform surface contact. • Slip-On Flanges Designed for ease of installation by sliding over the pipe and welding both sides for moderate sealing. • Custom-Machined Flanges Available in specific dimensions and stainless steel grades as per customer specifications and operational requirements. Stainless Steel Grades and Composition: 1. 304 (Austenitic Stainless Steel) Composition: • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 11.0% Applications: Used in water supply lines, food-grade piping, and low-pressure process lines due to its hygienic properties and corrosion resistance. 2. 316 (Molybdenum-Alloyed Stainless Steel) Composition: • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% Applications: Suited for mildly corrosive environments including water filtration systems and food-grade tanks. 3. 321 (Titanium-Stabilized Stainless Steel) Composition: • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 17.0 – 19.0% • Nickel (Ni): 9.0 – 12.0% • Titanium (Ti): ≥ 5x(C+N) Applications: Applicable in moderately high temperatures or where intergranular corrosion resistance is important, such as thermal pipelines and heating systems. Applications of DIN 2573 Stainless Steel Flanges: • Water Distribution and Treatment Systems: Used in potable and waste water systems, ensuring non-reactive and rust-resistant performance. • HVAC and Building Installations: Employed in air ducts, chilled water lines, and other HVAC components where low-pressure performance is sufficient. • Food and Beverage Processing: Chosen for hygienic piping setups in non-pressurized fluid transfer applications. • Industrial Utility Lines: Integrated into auxiliary piping systems for lubricants, cooling water, and drainage. • Agricultural and Irrigation Systems: Used in low-pressure pumping and irrigation lines due to their corrosion resistance and ease of installation. Key Features: • Manufactured in compliance with DIN 2573 standard • PN 6 pressure rating suitable for non-critical systems • Excellent corrosion resistance with hygienic surface options • Flat and slip-on configurations for simplified assembly • Available in 304, 316, 321, and other stainless steel grades Conclusion: DIN 2573 Stainless Steel Flanges PN 6 by Ladhani Metal Corporation offer a cost-effective and reliable solution for low-pressure applications. Their corrosion-resistant material, ease of installation, and compliance with international standards make them ideal for various general-purpose industrial systems. For tailored configurations, specific material grades, or technical support, contact Ladhani Metal Corporation.

DIN 2569 Carbon Steel Flanges PN 100 are precision-engineered welding neck flanges manufactured from high-strength carbon steel, designed to perform reliably in high-pressure and high-temperature industrial environments. Built to DIN 2569 standards, these flanges offer excellent mechanical strength, structural integrity, and thermal performance, making them ideal for use in industries such as oil and gas, power generation, petrochemical, construction, and general engineering. Ladhani Metal Corporation is a reputable manufacturer and exporter of carbon steel flanges, providing products that conform to stringent global standards. The welding neck design allows for permanent and high-integrity pipe connections, making these flanges particularly suitable for applications subject to pressure fluctuations, vibration, and thermal cycling. Pressure Rating: • PN 100 (100 bar / 1450 psi): Specifically designed for high-pressure systems that require reliable sealing, robust mechanical strength, and thermal endurance in demanding industrial conditions. Flange Types: • Welding Neck Flanges Provide a tapered hub for stress distribution, ideal for high-pressure piping systems. • Raised Face (RF) Flanges Facilitates efficient gasket compression and sealing under elevated pressure and temperature. • Flat Face (FF) Flanges Used for connections with flat-faced components or non-metallic sealing materials. • Forged Welding Neck Flanges Offer enhanced strength, dimensional accuracy, and pressure resistance. • Custom-Machined Flanges Available in a wide range of sizes, pressure classes, and carbon steel grades to meet specific project needs. Carbon Steel Grades and Composition: 1. ASTM A105 (Forged Carbon Steel) Composition: • Carbon (C): 0.35% max • Manganese (Mn): 0.60–1.05% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.040% • Silicon (Si): 0.10–0.35% Applications: Commonly used in pressure systems, valves, and flanges for oil and gas and general-purpose industrial applications where temperature and pressure are moderate to high. 2. ASTM A350 LF2 (Low Temperature Carbon Steel) Composition: • Carbon (C): ≤ 0.30% • Manganese (Mn): 0.60–1.35% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.040% • Silicon (Si): 0.15–0.30% Applications: Ideal for low-temperature service, particularly in cryogenic or arctic environments in oil refineries, LNG plants, and chemical processing. 3. ASTM A516 Grade 70 (Pressure Vessel Quality Carbon Steel) Composition: • Carbon (C): ≤ 0.30% • Manganese (Mn): 0.85–1.20% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.035% Applications: Used in boilers, pressure vessels, and heat exchangers where toughness and resistance to high-pressure and high-temperature conditions are essential. Applications of DIN 2569 Carbon Steel Flanges: • Oil and Gas Pipelines: Used for transporting crude oil, natural gas, and petroleum products under pressure. • Power Plants: Installed in steam lines, turbines, and heat recovery systems due to their thermal and mechanical reliability. • Petrochemical and Refinery Units: Applied in high-pressure processing systems and reactors. • Construction and Infrastructure: Used in water supply systems, fire protection networks, and structural piping. • HVAC and Mechanical Engineering: Employed in heating, ventilation, and air conditioning networks. Key Features: • Manufactured to DIN 2569 standard • Available in PN 100 pressure rating • High mechanical strength and impact resistance • Excellent weldability and structural integrity • Designed for permanent, high-pressure pipe connections • Supplied with test certificates, quality assurance documents, and traceability • Can be surface-treated with anti-corrosion coatings, galvanizing, or black painting Conclusion: DIN 2569 Carbon Steel Flanges PN 100 from Ladhani Metal Corporation are engineered to meet the demands of high-pressure industrial systems with strength, reliability, and cost-efficiency. Suitable for a wide range of applications across various sectors, these flanges are available in customizable sizes and material grades. For detailed specifications, bulk inquiries, or technical assistance, contact Ladhani Metal Corporation today

DIN 2568 Carbon Steel Flanges PN 64 are robust threaded flanges manufactured from high-strength carbon steel, specifically designed to deliver reliable performance in high-pressure industrial systems. Produced in accordance with DIN 2568 specifications, these flanges offer excellent mechanical strength, thermal conductivity, and impact resistance, making them well-suited for demanding applications in oil and gas, petrochemicals, water treatment, mechanical construction, and power generation. Ladhani Metal Corporation is a trusted manufacturer and exporter of carbon steel flanges, offering products that comply with international quality standards and dimensional tolerances. The threaded design enables quick, weld-free installation and removal, making these flanges ideal for systems requiring ease of maintenance and rapid assembly. Pressure Rating: • PN 64 (64 bar / 928 psi): Engineered to withstand high-pressure environments and thermal variations in critical industrial applications. Flange Types: • Threaded (Screwed) Flanges Enable efficient installation without welding, ideal for systems requiring regular inspection or maintenance. • Raised Face (RF) Flanges Improve gasket sealing by concentrating pressure at the gasket area, ideal for high-pressure applications. • Flat Face (FF) Flanges Used in systems involving flat mating surfaces, particularly with brittle or non-metallic equipment. • Forged Threaded Flanges Provide excellent mechanical properties, dimensional accuracy, and durability under load. • Custom-Machined Flanges Available in various sizes, sealing surfaces, and material grades as per customer requirements. Available Carbon Steel Grades and Composition: 1. ASTM A105 (Forged Carbon Steel) Composition: • Carbon (C): ≤ 0.35% • Manganese (Mn): 0.60 – 1.05% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.040% • Silicon (Si): 0.10 – 0.35% Applications: Widely used in valve, pipe, and fitting assemblies in oil and gas, power, and chemical systems due to its strength, toughness, and weldability. 2. ASTM A350 LF2 (Low-Temperature Carbon Steel) Composition: • Carbon (C): ≤ 0.30% • Manganese (Mn): 0.60 – 1.35% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.040% • Silicon (Si): 0.15 – 0.30% Applications: Ideal for cryogenic and low-temperature pressure systems such as pipelines, storage tanks, and vessel components operating in sub-zero climates. Applications of DIN 2568 Carbon Steel Flanges: • Oil and Gas Industry Utilized in upstream and downstream operations, including high-pressure pipelines, wellheads, and separators. • Power Plants Used in steam, cooling water, and high-pressure boiler systems. • Water and Wastewater Management Suitable for potable water lines, sewage treatment facilities, and utility piping systems. • Petrochemical and Refining Applied in process piping that handles non-aggressive or mildly corrosive fluids. • Mechanical and Structural Installations Common in HVAC systems, pressure vessels, and general mechanical piping networks. Key Features: • Manufactured as per DIN 2568 standard • Rated for PN 64 high-pressure applications • Excellent strength, impact resistance, and thermal conductivity • Threaded connection ensures quick and easy, weld-free assembly • Cost-effective and durable solution for industrial infrastructure • Supplied with test certificates, inspection reports, and full traceability • Compatible with galvanizing, coating, or welding processes as required Conclusion: DIN 2568 Carbon Steel Flanges PN 64 from Ladhani Metal Corporation are engineered for high performance in critical industrial environments. Offering high pressure resistance, mechanical durability, and easy installation, these flanges are an optimal solution for a wide range of piping systems. For custom sizes, material options, or technical consultation, contact Ladhani Metal Corporation today.

DIN 2568 Stainless Steel Flanges PN 64 are precision-engineered threaded flanges manufactured from high-quality stainless steel, designed for reliable performance in high-pressure industrial applications. Built to DIN 2568 standards, these flanges offer superior corrosion resistance, mechanical strength, and thermal stability, making them suitable for use in critical systems across industries such as chemical processing, pharmaceuticals, marine engineering, food and beverage, and water treatment. Ladhani Metal Corporation is a trusted manufacturer and exporter of stainless steel flanges, providing products that meet rigorous international standards. The threaded design allows for fast, weld-free assembly and disassembly, making these flanges particularly valuable in systems requiring frequent maintenance or installation flexibility. Pressure Rating: • PN 64 (64 bar / 928 psi): Specifically designed for high-pressure systems requiring excellent sealing performance, mechanical reliability, and corrosion resistance in aggressive or demanding environments. Flange Types: • Threaded (Screwed) Flanges Allows convenient assembly and disassembly, ideal for systems requiring regular access. • Raised Face (RF) Flanges Enhances sealing capability in elevated pressure and temperature conditions. • Flat Face (FF) Flanges Used in systems with flat mating surfaces, particularly where non-metallic or brittle materials are involved. • Forged Threaded Flanges Provide enhanced strength, impact resistance, and dimensional precision. • Custom-Machined Flanges Available in a range of sizes, pressure classes, and stainless steel grades tailored to customer requirements. Stainless Steel Grades and Composition: 1. ASTM A182 F304 (Austenitic Stainless Steel) Composition: • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 11.0% Applications: Commonly used in food processing, water treatment, and mild chemical applications due to its excellent corrosion resistance and weldability. 2. ASTM A182 F316 (Molybdenum-Alloyed Stainless Steel) Composition: • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% Applications: Ideal for corrosive environments such as marine, chemical, and offshore industries due to its enhanced resistance to chlorides and acids. 3. ASTM A182 F321 (Titanium-Stabilized Stainless Steel) Composition: • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 17.0 – 19.0% • Nickel (Ni): 9.0 – 12.0% • Titanium (Ti): ≥ 5x(C+N) Applications: Suitable for high-temperature applications, including exhaust systems and thermal processing equipment, offering improved resistance to intergranular corrosion. Applications of DIN 2568 Stainless Steel Flanges: • Chemical and Petrochemical Plants: Used in corrosive process environments where stainless steel’s durability is essential. • Marine and Offshore Engineering: Ideal for saltwater exposure and harsh weather conditions. • Pharmaceutical and Food Processing: Used in hygienic systems that require corrosion resistance and easy cleaning. • Water and Wastewater Systems: Employed in potable and industrial water lines, offering rust-free performance. • HVAC and Mechanical Systems: Integrated in industrial air, heating, and cooling networks requiring long-lasting service. Key Features: • Manufactured to DIN 2568 standard • Available in PN 64 pressure rating • Superior corrosion resistance and mechanical integrity • Weld-free, threaded design for easy installation and disassembly • Compatible with various sealing surfaces and pipe connections • Available with test certifications, quality documentation, and traceability • Suitable for polishing, pickling, passivation, and custom surface treatments Conclusion: DIN 2568 Stainless Steel Flanges PN 64 from Ladhani Metal Corporation are engineered for high-pressure performance, long-term durability, and ease of installation. Designed for a variety of demanding industrial and mechanical applications, these flanges offer reliable service and are available in customizable specifications. For custom sizes, material grades, or technical consultations, contact Ladhani Metal Corporation today.

DIN 2567 Carbon Steel flanges PN 25 and PN 40 are robust threaded flanges manufactured from high-strength carbon steel, engineered to perform reliably in moderate to high-pressure applications. Built to DIN 2567 standards, these flanges offer excellent mechanical strength, durability, and thermal conductivity, making them suitable for general-purpose industrial systems such as oil and gas, water pipelines, power plants, and mechanical construction. Ladhani Metal Corporation is a trusted manufacturer and exporter of carbon steel flanges, delivering components that meet stringent international standards. The threaded design ensures quick, weld-free assembly, making these flanges ideal for systems requiring ease of installation and periodic disassembly. Pressure Ratings: • PN 25 (25 bar / 362 psi): Designed for industrial systems requiring strong mechanical performance and resistance to moderate pressure and temperature variations. • PN 40 (40 bar / 580 psi): Suitable for high-pressure piping systems and fluid-handling applications in power, oil & gas, and manufacturing sectors. Flange Types: • Threaded (Screwed) Flanges Allows easy installation and removal, especially in systems requiring regular maintenance. • Raised Face (RF) Flanges Enhances sealing performance under elevated pressure and temperature conditions. • Flat Face (FF) Flanges Used in systems with flat mating surfaces, especially when brittle or non-metallic components are involved. • Forged Threaded Flanges Provide superior strength, resistance to impact, and tight dimensional tolerances. • Custom-Machined Flanges Available in various sizes, pressure classes, and carbon steel grades as per customer specifications. Available Carbon Steel Grades and Composition: 1. ASTM A105 (Forged Carbon Steel) o Composition: • Carbon (C): ≤ 0.35% • Manganese (Mn): 0.60 – 1.05% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.040% • Silicon (Si): 0.10 – 0.35% o Applications: Widely used in oil and gas piping, power generation, valves, and fittings due to its high strength and ease of fabrication. 2. ASTM A350 LF2 (Low-Temperature Carbon Steel) o Composition: • Carbon (C): ≤ 0.30% • Manganese (Mn): 0.60 – 1.35% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.040% • Silicon (Si): 0.15 – 0.30% o Applications: Ideal for low-temperature service in pressure vessels and pipelines, especially in cryogenic environments and cold climates. Applications of DIN 2567 Carbon Steel Flanges: • Oil & Gas Industry: Used in upstream and downstream operations, including pipelines, pressure vessels, and refineries. • Power Plants: Installed in high-pressure steam lines, water supply networks, and heat exchangers. • Water and Wastewater Systems: Suitable for potable water lines, sewage treatment, and distribution systems. • Chemical and Petrochemical Plants: Used in process piping systems carrying non-aggressive or mildly corrosive fluids. • Mechanical and HVAC Systems: Common in industrial construction for heating, ventilation, and air conditioning systems. Key Features: • Conforms to DIN 2567 standard • Available in PN 25 and PN 40 pressure ratings • High tensile strength and impact resistance • Cost-effective solution for industrial and utility systems • Threaded design enables non-welded, easy assembly and maintenance • Suitable for welding, galvanizing, or surface coating • Supplied with test certificates, quality documentation, and full traceability Conclusion: DIN 2567 Carbon Steel flanges PN 25 and PN 40 from Ladhani Metal Corporation are engineered for strength, affordability, and versatile performance. Ideal for use in industrial piping, mechanical assemblies, and infrastructure projects, these flanges deliver long-lasting service and simple installation. For custom dimensions, material grades, or technical inquiries, contact Ladhani Metal Corporation today.