Half Round Tube Shield Ladhani Metal Corporation manufactures SS 430 Half Round Straight Tube Shields to provide cost-effective protection for straight boiler and heat exchanger tubes in mildly corrosive and oxidizing environments. SS 430 is a ferritic stainless steel known for its good resistance to oxidation, thermal fatigue, and moderate corrosion in non-aggressive media. These shields are ideal for shielding tubes exposed to dry flue gases, ash, and scale buildup. SS 430 Half Round Straight Tube Shield The SS 430 Half Round Straight Tube Shield is designed to fit snugly over the exterior surface of straight tubes, forming a physical barrier that resists thermal cycling, soot-blowing erosion, and mechanical wear. With its high chromium content, SS 430 provides enhanced resistance to scaling at elevated temperatures. It is commonly used in power plants, economizers, WHRBs, and industrial boilers where consistent performance and affordability are important. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of SS 430 Half Round Straight Tube Shields, offering practical shielding solutions to extend the life of tubes in thermal and process equipment. Material Grade SS 430 – Ferritic stainless steel with good oxidation resistance and moderate corrosion protection in non-chloride environments. Chemical Composition of SS 430 • Carbon (C): ≤ 0.12% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Iron (Fe): Balance Applications: Suitable for dry, clean flue gas zones and mildly corrosive environments with minimal exposure to chlorides or strong acids. Uses • Straight tube shielding in boiler flue gas paths • Protection in economizers and preheater sections • Used in WHRBs for dry particulate erosion prevention • Ideal for food, paper, and textile industries with clean gas flow • Applied in low-to-moderate temperature furnace and duct systems Features • Good oxidation resistance – Performs well in clean, dry heat environments • Cost-efficient – Affordable solution for basic erosion protection • Magnetic ferritic grade – Offers dimensional stability under temperature cycling • Resistant to scaling – Up to ~815°C in intermittent service • Customizable – Lengths, radius, and thickness tailored to project needs • Easy attachment – Suitable for weld-on, clamp-on, or banded installation Applications • thermal boilers – Low-cost shielding for tubes in flue passages • process heat exchangers – Protects tubes in moderately aggressive environments • industrial dryers and ovens – Used in clean-air heating systems • WHRBs – Economical shield in clean-burning furnaces • general steam systems – Prevents tube wear and extends service life Conclusion SS 430 Half Round Straight Tube Shields by Ladhani Metal Corporation are a durable and economical choice for protecting straight tubes from heat, scale, and dry flue gas abrasion. With its balance of thermal resistance and cost-effectiveness, it serves reliably across a wide range of industrial systems. For custom configurations and bulk orders, contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered components used to protect boiler and heat exchanger tubes from erosion, scaling, and high-temperature corrosion. These shields are widely applied in industrial systems exposed to thermal cycling, aggressive gases, and particulate flow. Their half-round shape allows for simple and secure installation over straight or curved tube surfaces, extending tube life and reducing maintenance needs. 1Cr13 U Type Half Round Tube Shield The 1Cr13 U Type Half Round Tube Shield is fabricated from 1Cr13, a martensitic stainless steel known for its excellent hardness, wear resistance, and moderate corrosion resistance. This U-type shield is ideal for protecting U-bend tube sections in systems where mechanical wear, steam erosion, and intermittent high temperatures are a concern. The U-shaped design offers precise coverage of both the inner and outer arcs of tube bends, especially in boiler coils, superheaters, and heat exchangers where localized wear and thermal impact are concentrated. • Outer U Type Half Round Tube Shield – Shields the outer curvature of the U-bend from gas flow abrasion, impact from slag particles, and heat-induced surface degradation. • Inner U Type Half Round Tube Shield – Protects the inner radius against turbulence-induced erosion, scaling, and mechanical fatigue. Ladhani Metal Corporation supplies 1Cr13 U Type Half Round Tube Shields for industrial applications where strength, hardness, and moderate corrosion protection are required at an economical cost. Chemical Composition of 1Cr13 – Martensitic Stainless Steel • Carbon (C): 0.15 – 0.20% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 12.0 – 14.0% • Nickel (Ni): ≤ 0.60% • Iron (Fe): Balance Applications: Well-suited for mildly corrosive and abrasive environments involving steam, flue gases, or mechanical impact at moderate to high temperatures. Uses • Protection of U-bend tubes in superheaters, reheaters, and boiler coils • Shielding curved tubes in industrial furnaces, economizers, and condensers • Coverage for return bends in WHRBs and HRSGs subject to mechanical and thermal wear • Application in process gas heaters and utility boilers in petrochemical and power sectors • Ideal for systems where hardness and erosion resistance are more critical than high corrosion resistance Features • Good oxidation and scaling resistance – Chromium content offers adequate protection in dry, high-temperature environments. • High mechanical strength – Martensitic structure provides superior wear resistance and hardness, reducing erosion damage in turbulent flow areas. • Dual-bend protection – Available in both inner and outer U-type configurations for complete shielding of tube bends. • Custom fitment – Precisely manufactured to match specific tube radii and diameters, ensuring stable and secure installation. • Fast installation – Easily attached using clamps, banding, or tack welding without requiring system disassembly. • Economical solution – Provides effective protection in harsh environments with a cost-efficient stainless steel alloy. Applications • thermal power plants – Used on U-bend tubes in superheaters and reheaters where flue gas erosion and steam wear are present. Enhances system life and performance. • waste heat recovery boilers – Shields tube bends in WHRBs from slag, scale, and high-velocity gas streams, improving long-term reliability. • petrochemical industries – Suitable for curved tubes in heaters, exchangers, and gas furnaces exposed to heat and particulate flow. • general industrial boilers – Applied to return bends in utility boilers and process heaters for erosion and oxidation control. • chemical and refining sectors – Ideal for non-aggressive environments requiring mechanical protection more than extreme corrosion resistance. Conclusion The 1Cr13 U Type Half Round Tube Shield by Ladhani Metal Corporation offers strong mechanical protection and moderate corrosion resistance for U-bend tube sections in boilers, heat exchangers, and industrial heating systems. Its martensitic stainless steel composition provides superior wear resistance, making it well-suited for environments with steam erosion, thermal stress, and mechanical impact. Designed for easy installation and long-term durability, this shield is a practical solution for a wide range of thermal and utility applications. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are robust, precision-fabricated protective sleeves designed to guard the outer surfaces of tubes in boilers, heat exchangers, incinerators, and high-temperature processing equipment. Engineered to extend the service life of tubes exposed to corrosive gases, abrasive particulates, and elevated temperatures, these shields provide a reliable barrier against mechanical and chemical degradation. The half-round design facilitates easy installation while ensuring a secure, form-fitting layer of defense. 1Cr13 Half Round Tube Shield The 1Cr13 Half Round Tube Shield is a semi-cylindrical component manufactured from martensitic stainless steel containing approximately 13% chromium. Classified under the 1Cr13 grade, this alloy delivers good corrosion resistance, excellent wear performance, and moderate strength at elevated temperatures. It is especially suited for thermal environments that are not extremely oxidizing or carburizing but where erosion and mechanical wear are a concern. With a higher hardness potential through heat treatment and moderate thermal resistance, 1Cr13 shields are ideal for applications involving flue gas exposure, soot-laden atmospheres, and temperature cycling. The shield’s half-round configuration is precision-engineered for optimal tube coverage and long-term durability. It offers a balance of strength, corrosion resistance, and cost-effectiveness, making it suitable for a wide range of industrial processes. Chemical Composition of 1Cr13 – Martensitic Stainless Steel • Carbon (C): 0.15 – 0.20% • Silicon (Si): ≤ 1.00% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Chromium (Cr): 12.0 – 14.0% • Nickel (Ni): ≤ 0.60% • Iron (Fe): Balance Uses • Boiler Tube Protection – Shields tube surfaces from flue gas erosion, ash particle abrasion, and soot buildup in economizers and waterwalls. • Heat Exchanger Tubes – Provides an extra layer of wear resistance in zones prone to mechanical stress and fluid turbulence. • Incinerator and Waste Heat Units – Guards tubes exposed to fluctuating temperatures, slag, and particulate deposits. • Cement Plant Piping – Protects tubing and ducts in kiln exhaust systems from abrasive dust and high flow velocity. • Air Preheaters and Recuperators – Enhances the durability of components subjected to temperature variations and corrosive gases. Features • Moderate Oxidation Resistance – Chromium content enables good performance in mildly oxidizing environments and intermittent exposure to high temperatures. • Wear and Abrasion Resistance – Martensitic structure offers high surface hardness and resistance to mechanical wear. • Heat Treatable – Can be hardened to increase durability and resistance to deformation. • Cost-Effective – Provides a lower-cost alternative to austenitic and superalloy shields for moderate service conditions. • High Dimensional Accuracy – Manufactured with tight tolerances to ensure secure fitment and uniform tube coverage. • Convenient Installation – Half-round shape enables quick mounting through welding or clamping techniques. • Versatile Finishing Options – Supplied with pickled or mechanically polished surfaces to improve corrosion resistance and adhesion. Applications • Power Generation – Used in economizer, preheater, and convection sections of boilers to prevent erosion and fouling. • Chemical and Fertilizer Plants – Protects exposed tube surfaces in systems with moderate chemical exposure. • Metallurgical Furnaces – Shields mechanical and flue components exposed to particulate movement and temperature cycling. • Pulp and Paper Industry – Used in recovery boilers and heat exchangers where corrosion resistance and mechanical strength are both required. • Petrochemical Plants – Applied in lower-temperature zones where scaling and erosion are primary concerns. Conclusion The 1Cr13 Half Round Tube Shield by Ladhani Metal Corporation provides an optimal solution for industrial tube protection in moderate temperature and corrosion environments. Its martensitic stainless steel composition ensures excellent wear resistance, good oxidation stability, and structural strength at a competitive cost. Designed for easy installation and reliable performance, these shields are ideal for various applications in power, process, and heat recovery systems. Custom-built to meet specific dimensions, material thicknesses, and finishing preferences, 1Cr13 tube shields offer dependable service life extension for critical heat transfer equipment. For technical specifications, pricing, or customization inquiries, please contact Ladhani Metal Corporation.

DIN 2527 SS P.H. (Precipitation Hardening) Blind Flanges are designed for use in high-performance piping systems that require robust sealing solutions. Made from precipitation-hardening stainless steel alloys, these flanges combine high strength, excellent corrosion resistance, and the ability to withstand elevated temperatures. Manufactured to meet the DIN 2527 standard, these flanges ensure dimensional accuracy, high pressure tolerance, and superior mechanical performance, making them ideal for demanding applications in industries such as chemical processing, aerospace, and power generation. Material Composition of Precipitation Hardening Stainless Steel (SS P.H.): Precipitation-hardening stainless steels are a family of alloys known for their ability to achieve high strength through heat treatment. Grade 17-4 PH: Chromium (Cr): 15.0% - 17.5% Nickel (Ni): 3.0% - 5.0% Copper (Cu): 3.0% - 5.0% Iron (Fe): Balance Manganese (Mn): 1.0% max Silicon (Si): 1.0% max Carbon (C): ≤ 0.07% Phosphorus (P): ≤ 0.04% Sulfur (S): ≤ 0.03% Grade 15-5 PH: Chromium (Cr): 14.0% - 15.5% Nickel (Ni): 3.5% - 5.5% Copper (Cu): 2.5% - 4.5% Iron (Fe): Balance Manganese (Mn): 1.0% max Silicon (Si): 1.0% max Carbon (C): ≤ 0.07% Phosphorus (P): ≤ 0.04% Sulfur (S): ≤ 0.03% Key Features of DIN 2527 SS P.H. Blind Flanges: High Strength: Precipitation-hardened stainless steels, such as 17-4 PH and 15-5 PH, are known for their high tensile strength and hardness. Corrosion Resistance: Stainless steel, especially in the precipitation-hardened grades, offers excellent resistance to corrosion, including resistance to pitting, crevice corrosion, and stress corrosion cracking in both aqueous and high-temperature environments High-Temperature Performance: SS P.H. Blind Flanges can withstand high temperatures, making them suitable for use in applications that involve elevated temperatures (up to 600°C or 1100°F), such as chemical reactors, power plants, and aerospace systems. Dimensional Accuracy & Pressure Ratings: These flanges are manufactured to precise DIN 2527 standards to ensure tight seals and correct fitment in piping systems. They are available in multiple pressure classes such as PN6, PN10, and PN16, which denote the maximum pressure the flange can safely withstand. Design Options: Standard Blind Flange (Type A): A solid, circular flange used to seal the end of a pipe or vessel, suitable for general applications. Flat-Faced Blind Flange: Features a flat sealing surface for low-pressure applications, ideal for ensuring a tight seal in systems with low pressure. Raised Face Blind Flange: Has a raised area around the center, providing enhanced sealing for higher-pressure applications. Ring-Type Joint (RTJ) Blind Flange: Designed with a groove for a ring-type joint gasket, used in high-pressure systems such as oil and gas pipelines. Long Weld Neck Blind Flange: Equipped with an extended neck for welding, offering additional strength and support in high-pressure or stressed systems. Nominal Diameter: DIN 2527 SS P.H. Blind Flanges are available in various nominal diameters (DN), ranging from DN10 (1/2 inch) up to DN600 (24 inches) or larger, ensuring compatibility with a wide range of piping systems and applications.

DIN 2527 Titanium Grade 2 Blind Flanges are specialized sealing components designed to close the open ends of pipes, vessels, or equipment in systems where no further connections are required. Made from Titanium Grade 2, these flanges are renowned for their excellent corrosion resistance, high strength, and light weight. Titanium Grade 2 is the most commonly used commercially pure titanium, offering a great combination of strength and durability for a wide range of industrial applications. The DIN 2527 standard ensures that these flanges meet precise dimensional, pressure, and mechanical requirements. Material Composition of Titanium Grade 2: Titanium Grade 2 (commercially pure titanium) is primarily composed of the following elements: Titanium (Ti): 99.2% min Iron (Fe): 0.30% max Oxygen (O): 0.25% max Carbon (C): 0.08% max Nitrogen (N): 0.03% max Hydrogen (H): 0.015% max Titanium Grade 2 is known for its outstanding combination of strength, ductility, and resistance to corrosion, making it suitable for a wide variety of industrial uses, especially in environments where high corrosion resistance is critical. Key Features of DIN 2527 Titanium Grade 2 Blind Flanges: Corrosion Resistance: Titanium Grade 2 is highly resistant to corrosion, particularly in environments that are exposed to chloride ions, seawater, and acidic conditions. It offers exceptional protection against pitting, crevice corrosion, and stress corrosion cracking. These flanges are ideal for use in applications involving harsh chemicals, acids, and marine environments, including seawater pipelines, desalination plants, and chemical processing systems. Strength and Durability: While Titanium Grade 2 is not as strong as titanium alloys with added elements like aluminum and vanadium (e.g., Grade 5), it still offers excellent strength-to-weight ratio, especially in terms of tensile strength and resistance to deformation under stress. It retains its strength even at elevated temperatures, making it reliable in systems exposed to thermal cycling and fluctuating temperatures. Temperature Resistance: Titanium Grade 2 maintains its performance at temperatures up to 400°C (752°F), providing stability and durability in environments with moderate to high temperatures. This makes it suitable for a wide range of industrial applications. Dimensional Accuracy and Pressure Ratings: DIN 2527 Titanium Grade 2 Blind Flanges are produced to precise specifications, ensuring accurate dimensions for a secure and reliable seal. These flanges are available in various pressure classes such as PN6, PN10, and PN16, depending on the requirements of the piping system. Design Variations: Standard Blind Flange (Type A): A solid, circular flange used to completely seal the end of a pipe or vessel. Flat-Faced Blind Flange: Designed with a flat sealing surface, ideal for low-pressure systems where a tight seal is required. Raised Face Blind Flange: Features a raised center portion to improve sealing capabilities in higher pressure systems. Ring-Type Joint (RTJ) Blind Flange: Incorporates a groove for a ring-type joint gasket, typically used in high-pressure and critical applications such as oil and gas pipelines. Long Weld Neck Blind Flange: Has an extended neck, offering additional strength, particularly useful in high-stress or high-pressure environments. Nominal Diameter: DIN 2527 Titanium Grade 2 Blind Flanges come in various nominal diameters (DN), ranging from DN10 (1/2 inch) up to DN600 (24 inches) or larger, depending on the system requirements.

DIN 2527 Inconel Blind Flanges are specialized components designed to close off the ends of pipes or vessels in industrial piping systems, where no further connection is required. These blind flanges are made from Inconel alloys, a family of high-performance superalloys, known for their outstanding strength, resistance to high temperatures, and corrosion resistance in aggressive environments. The DIN 2527 standard ensures that these flanges meet the highest specifications for dimensional accuracy, pressure tolerance, and mechanical strength. Material Composition of Inconel Alloys: The primary materials used in the production of DIN 2527 Inconel Blind Flanges include Inconel 600, Inconel 625, and Inconel 718, each offering specific advantages depending on the application: Inconel 600 (Ni 72%, Cr 15%): Known for excellent resistance to oxidation and corrosion in high-temperature environments. Inconel 625 (Ni 58%, Cr 21%, Mo 9%): Offers superior resistance to pitting, stress corrosion cracking, and oxidation. Inconel 718 (Ni 50%, Cr 19%, Mo 3%, Nb 5%): Known for high strength and excellent fatigue and thermal-fatigue strength. These alloys provide superior resistance to a wide range of harsh environments, such as high-temperature oxidation, sulfuric and phosphoric acid corrosion, and chloride-induced stress corrosion cracking. Key Features of DIN 2527 Inconel Blind Flanges: Temperature and Pressure Resistance: Operating Temperature: Inconel alloys can withstand extremely high temperatures, with Inconel 600 handling temperatures up to 1093°C (2000°F), Inconel 625 up to 982°C (1800°F), and Inconel 718 capable of continuous operation at temperatures of up to 700°C (1292°F). Pressure Tolerance: Designed to endure elevated pressures, with pressure ratings available in PN6, PN10, PN16, and other standard pressure classes, ensuring safety under extreme operating conditions. Corrosion Resistance: Exceptional resistance to oxidation, scaling, and various forms of corrosion, particularly in high-temperature environments. Inconel 625 is particularly effective in marine and chemical processing environments due to its resistance to pitting and crevice corrosion. Strength and Durability: Inconel alloys exhibit outstanding mechanical strength, even at high temperatures, ensuring the structural integrity of piping systems under stress. The DIN 2527 standard defines the dimensions and design to accommodate high-stress conditions, making these flanges essential in demanding industries. Dimensional Accuracy and Pressure Class: DIN 2527 ensures precise dimensional accuracy, allowing for effective sealing and easy installation in piping systems. Available in various sizes and thicknesses, with flanges designed to meet specific pressure classes like PN6, PN10, and PN16, depending on the application. Design and Types: Standard Blind Flange (Type A): A solid, circular flange ideal for general applications. Flat-Faced Blind Flange: Features a flat sealing surface, suitable for low-pressure systems. Raised Face Blind Flange: Has a raised surface for improved sealing in higher pressure applications. Ring-Type Joint (RTJ) Blind Flange: Designed for high-pressure applications, with a groove for an RTJ gasket. Long Weld Neck Blind Flange: Offers added strength with an extended neck for welding, often used in high-pressure or stressed systems. Nominal Diameter: Available in a wide range of nominal diameters, typically from DN10 (1/2 inch) up to DN600 (24 inches) or more, to accommodate different pipe sizes and system requirements.

DIN 2527 Monel Blind Flanges are critical components used in piping systems to seal the open ends of pipes, vessels, or equipment when no further connection is needed. These blind flanges are made from Monel alloys, a group of nickel-copper-based alloys known for their exceptional corrosion resistance, especially in harsh marine and chemical environments. Monel flanges, manufactured to the DIN 2527 standard, ensure superior strength and reliability in demanding applications, making them ideal for industries such as chemical processing, marine, and power generation. Material Composition of Monel Alloys: Monel alloys are primarily composed of Nickel (Ni) and Copper (Cu), along with small amounts of other elements such as iron, manganese, and silicon. Two of the most commonly used Monel alloys in blind flange production are: Monel 400: Nickel (Ni): 63% Copper (Cu): 28-34% Iron (Fe): 2.5% max Manganese (Mn): 2.0% max Silicon (Si): 0.5% max Carbon (C): ≤ 0.30% Sulfur (S): ≤ 0.024% Monel K-500: Nickel (Ni): 63% Copper (Cu): 28% Aluminum (Al): 2.3-3.1% Titanium (Ti): 0.35-0.85% Iron (Fe): 2.5% max Manganese (Mn): 1.0% max Silicon (Si): 0.5% max Carbon (C): ≤ 0.30% Sulfur (S): ≤ 0.015% Key Features of DIN 2527 Monel Blind Flanges: Corrosion Resistance: Monel alloys are highly resistant to a wide variety of corrosive agents, including seawater, sulfuric acid, hydrochloric acid, and alkaline environments. Monel 400, in particular, is known for its excellent resistance to chloride-induced stress corrosion cracking, making it ideal for marine applications. Monel K-500 offers enhanced strength and resistance to corrosion fatigue, commonly used in more challenging environments. Temperature Resistance: Monel 400 can withstand temperatures up to 1000°F (538°C) continuously and up to 1200°F (649°C) intermittently. Monel K-500 offers high strength and resistance to oxidation and scaling in environments up to 1000°F (538°C). Mechanical Strength: Monel 400 is known for its strength and durability, especially in environments that require resistance to both high pressure and corrosion. Monel K-500 exhibits additional strength due to the presence of aluminum and titanium, making it suitable for applications under higher stresses. Dimensional Accuracy and Pressure Class: DIN 2527 Monel Blind Flanges are manufactured to precise dimensions, ensuring a secure seal in the piping system. These flanges are available in various pressure classes, such as PN6, PN10, PN16, and others, providing flexibility for different pressure ratings. Design Options: Standard Blind Flange (Type A): A solid, flat disc used to seal the end of a pipe or vessel. Flat-Faced Blind Flange: Designed with a flat sealing surface, ideal for low-pressure systems. Raised Face Blind Flange: Features a raised surface around the center to improve sealing in high-pressure systems. Ring-Type Joint (RTJ) Blind Flange: Includes a groove for an RTJ gasket, used for high-pressure applications, often in the oil and gas industry. Long Weld Neck Blind Flange: Features an extended neck for welding, offering additional strength and used in high-pressure or stressed systems. Nominal Diameter: DIN 2527 Monel Blind Flanges are available in a wide range of sizes, typically from DN10 (1/2 inch) up to DN600 (24 inches) or more, depending on system requirements.

Ladhani Metal Corporation manufactures, supplies, and exports Boiler Tube Erosion Shields and Bends designed to safeguard boiler tubes from severe erosion, abrasion, oxidation, and soot blower damage. Installed mainly on tube bends and high-impact zones, these shields act as sacrificial protective covers that extend tube service life, minimize maintenance costs, and improve operational reliability in power plants, WHRBs, HRSGs, and industrial boilers. Function of Boiler Tube Erosion Shield / Bend • Protects boiler tubes against erosion caused by high-velocity flue gases and abrasive fly ash particles • Shields critical bends and exposed sections from soot blower jet damage • Provides resistance to high-temperature oxidation and corrosion in aggressive boiler environments • Ensures longer service life of boiler components under extreme pressure and temperature conditions Available Grades Stainless Steel Grades: • SS 304 / SS 304L • SS 310 / SS 310S • SS 316 / SS 316L • SS 410 / SS 420 / SS 430 Special Alloy Grades: • 1Cr18Ni9Ti • Cr25Ni20 • 1Cr25Ni20Si2 • Cr23Ni13 • 1Cr20Ni14Si2 • 1Cr13 Applications • Power generation boilers – protection of reheater, superheater, and economizer tube sections • Waste Heat Recovery Boilers (WHRBs) – shielding tubes in high-erosion zones • Heat Recovery Steam Generators (HRSGs) – erosion and oxidation control in tube bends • Petrochemical and process heaters – protection against thermal cycling and erosive particles • Industrial steam plants – ensuring durability in corrosive and abrasive service Features • Excellent resistance to erosion and corrosion at high temperatures • Effective protection from soot blower jet impingement and flue gas particle flow • Manufactured with precision for an accurate fit on bends and exposed tube areas • Available in stainless steel and special alloy grades for diverse service conditions • Export-ready in multiple sizes, diameters, and bend profiles Conclusion Boiler Tube Erosion Shields and Bends from Ladhani Metal Corporation are engineered for superior performance in high-temperature, erosive environments. With a complete range of stainless steel and special alloy grades, these shields provide long-lasting tube protection, reduce maintenance downtime, and enhance boiler efficiency for both domestic and global clients. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #HalfRoundReheaterShield #ReheaterTubeShield #BoilerReheaterProtection #PowerPlantTubeShield #BoilerErosionShield #SteamBoilerTubeShield #HighTempTubeShield #BoilerWearProtection

Ladhani Metal Corporation manufactures, supplies, and exports Boiler Tube Protection Shields and Bends in Stainless Steel and Special Alloy grades. These shields are engineered to protect boiler tubes, especially at bends and high-impact zones, from erosion, corrosion, oxidation, and soot blower damage. Designed as a sacrificial barrier, they extend tube life, minimize maintenance downtime, and ensure reliable performance in power plants, industrial boilers, WHRBs, and HRSGs. Function of Boiler Tube Protection Shield / Bend • Shields boiler tubes at bends and exposed areas against high-velocity flue gas erosion • Reduces damage from abrasive fly ash and soot blower jets • Provides resistance to high-temperature oxidation and corrosion • Extends service life of boiler components under extreme thermal and mechanical stress Available Grades Stainless Steel Grades: • SS 304 / SS 304L • SS 310 / SS 310S • SS 316 / SS 316L • SS 410 / SS 420 / SS 430 Special Alloy Grades: • 1Cr18Ni9Ti • Cr25Ni20 • 1Cr25Ni20Si2 • Cr23Ni13 • 1Cr20Ni14Si2 • 1Cr13 Applications • Power generation boilers – reheater, superheater, and economizer tube protection • Waste Heat Recovery Boilers (WHRBs) – erosion and oxidation resistance in flue gas zones • Heat Recovery Steam Generators (HRSGs) – shielding of critical bends and exposed sections • Petrochemical and process heaters – protection under aggressive thermal cycling • Industrial steam plants – durability in corrosive and erosive service Features • High corrosion and oxidation resistance at elevated temperatures • Effective barrier against erosive flue gas streams and ash particles • Precision-engineered design ensures accurate fit on tube bends • Manufactured in stainless steels and special alloys for diverse service conditions • Export-ready in a wide range of sizes, thicknesses, and bend profiles Conclusion Boiler Tube Protection Shields and Bends from Ladhani Metal Corporation are available in a comprehensive range of stainless steel and special alloy grades to suit demanding operating environments. Offering superior erosion and corrosion resistance, these shields ensure long-term boiler efficiency, reduced downtime, and extended tube life in both domestic and international markets. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #HalfRoundReheaterShield #ReheaterTubeShield #BoilerReheaterProtection #PowerPlantTubeShield #BoilerErosionShield #SteamBoilerTubeShield #HighTempTubeShield #BoilerWearProtection#BoilerTubeProtection #BoilerTubeShield #BoilerBendShield #HalfRoundTubeShield #BoilerTubeWearProtection #PowerPlantTubeShield #BoilerTubeErosionShield #BoilerTubeProtectionShield #BoilerTubeSafety #BoilerTubeBendShield #IndustrialBoilerShield #SteamBoilerTubeProtection #HeatExchangerTubeShield #BoilerTubeGuard #BoilerTubeShielding