Ladhani Metal Corporation manufactures, supplies, and exports a comprehensive range of Erosion Protection Shields designed to safeguard boiler tubes, superheater tubes, and reheater tubes in power plants, industrial boilers, and heat recovery systems. These shields, also known as half round tube shields or boiler tube erosion shields, act as a protective cover over tubes exposed to high-velocity flue gases, abrasive fly ash, and soot blower impact. By reducing direct contact with erosive and corrosive media, they significantly extend the service life of tubes and minimize unplanned shutdowns. Function of Erosion Protection Shields • Provide a wear-resistant barrier for boiler tubes in erosive zones • Reduce damage caused by abrasive ash particles and high-velocity flue gases • Protect against soot blower jet erosion and localized overheating • Extend operational life of tubes, lowering maintenance and replacement costs Available Grades • SS 304 / SS 304L • SS 310 / SS 310S • SS 316 / SS 316L • SS 410 / SS 420 / SS 430 • 1Cr13 • 1Cr18Ni9Ti • Cr25Ni20 • 1Cr25Ni20Si2 • Cr23Ni13 • 1Cr20Ni14Si2 Ladhani Metal Corporation manufactures Erosion Protection Shields in multiple lengths, diameters, and thicknesses, customized to fit various tube sizes and curvature requirements. All shields are precision-engineered for easy installation and secure fitment, ensuring reliable performance even under extreme boiler conditions. Applications • Power generation boilers – protection of superheater, reheater, and economizer tubes • Waste Heat Recovery Boilers (WHRBs) – safeguard against flue gas erosion • Heat Recovery Steam Generators (HRSGs) – protect tubes under continuous high-velocity gas exposure • Petrochemical process heaters and industrial steam systems – long-lasting erosion and oxidation resistance Features • Wide material grade availability to suit varied service conditions • High resistance to oxidation, scaling, and erosion at elevated temperatures • Low maintenance solution that improves tube reliability and lifespan • Export-ready specifications with assured quality and durability Conclusion Erosion Protection Shields from Ladhani Metal Corporation are engineered to deliver long-term protection for boiler tubes operating in highly erosive and corrosive environments. With a wide range of stainless steel and alloy grades available, these shields provide tailored solutions for diverse industrial applications, ensuring maximum efficiency and reduced operational downtime. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #HalfRoundReheaterShield #ReheaterTubeShield #BoilerReheaterProtection #PowerPlantTubeShield #BoilerErosionShield #SteamBoilerTubeShield #HighTempTubeShield #BoilerWearProtection

Ladhani Metal Corporation offers 1Cr25Ni20Si2 Half Round Tube Shields engineered to protect reheater (R/H) tubes in boilers, power plants, and industrial steam systems. Reheater tubes carry steam through the reheater section of the boiler, where steam is reheated after partial expansion in the high-pressure turbine to improve efficiency and prevent condensation. Made from high-alloy stainless steel grade 1Cr25Ni20Si2, these shields deliver excellent resistance to oxidation, carburization, and erosion at elevated temperatures, making them highly reliable for severe flue gas environments. Function of R/H Tubes • Carry steam through the reheater section of the boiler • Exposed to very high temperatures (often > 540°C) and erosion from flue gases • Often protected with Half Round Tube Shields in high-velocity and ash-laden zones Ladhani Metal Corporation manufactures, supplies, and exports 1Cr25Ni20Si2 Half Round Tube Shields in different lengths, diameters, and thicknesses to meet the requirements of domestic and international clients. 1Cr25Ni20Si2 Grade Chemical Composition – High-Alloy Stainless Steel • Carbon (C): ≤ 0.20% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.030% • Sulfur (S): ≤ 0.030% • Silicon (Si): 1.50 – 2.50% • Chromium (Cr): 24.00 – 26.00% • Nickel (Ni): 19.00 – 22.00% • Iron (Fe): Balance Applications: Suitable for reheater sections in thermal power plants, waste heat recovery boilers (WHRBs), and heat recovery steam generators (HRSGs), where oxidation, scaling, and erosion resistance are essential. Uses • Protects reheater tubes from erosion, scaling, and soot blower impact • Extends service life of boiler tubes in high-temperature operations • Shields R/H tubes against ash particle erosion and flue gas corrosion • Widely used in WHRBs, HRSGs, utility boilers, and petrochemical furnaces Features • High-temperature oxidation and scaling resistance • Superior mechanical strength and thermal stability • Enhanced silicon content for improved carburization resistance • Precision-engineered fit for reliable tube protection Applications • Power generation boilers – Protection for reheater tubes in extreme thermal zones • Waste heat recovery boilers – Guards against flue gas and ash erosion • Industrial steam systems – Dependable under thermal cycling conditions • Petrochemical and process heaters – Effective in high-temperature corrosive environments Conclusion The 1Cr25Ni20Si2 Half Round Tube Shield for Reheater (R/H) Tubes by Ladhani Metal Corporation provides long-lasting protection under severe high-temperature and erosive boiler conditions. Designed for durability, precision fit, and export-ready specifications, these shields help extend the service life of reheater tubes while reducing maintenance costs. For technical details and supply inquiries, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #HalfRoundReheaterShield #ReheaterTubeShield #BoilerReheaterProtection #PowerPlantTubeShield #BoilerErosionShield #SteamBoilerTubeShield #HighTempTubeShield #BoilerWearProtection

Ladhani Metal Corporation offers SS 430 Outer Half Round 90 Degree Bend Tube Shields designed to protect the outer arc of U-bend and 90-degree curved tubes in boilers, heat exchangers, superheaters, and reheaters. Manufactured from ferritic stainless steel grade SS 430, these shields provide good corrosion resistance, excellent formability, and thermal stability in moderately aggressive service environments. SS 430 is particularly suitable for applications where resistance to oxidation and surface scaling is needed without exposure to highly corrosive agents. The semi-cylindrical profile is precision-formed to match the outer curvature of return tube bends, offering a physical barrier against soot-blower impact, flue gas erosion, and ash particle wear. SS 430 shields are commonly used in utility and industrial boilers operating under dry, mildly corrosive, and thermally demanding conditions. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of SS 430 Outer Half Round 90 Degree Bend Tube Shields, offering custom configurations to suit specific plant layouts and service requirements. SS 430 Grade Chemical Composition – Ferritic Stainless Steel • Carbon (C): ≤ 0.12% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): ≤ 0.75% • Iron (Fe): Balance Applications: Ideal for power plants, WHRBs, HRSGs, and general industrial systems requiring protection for tube bends in dry heat and oxidizing environments. Uses • Shielding outer 90-degree bends in superheaters and reheaters • Applied in WHRBs and HRSG return coils exposed to dry flue gas • Protects against moderate erosion and oxidation in utility boilers • Suitable for curved tubes in industrial furnaces and heat recovery units Features • Cost-effective protection – Combines durability with economical material choice • Oxidation resistance – Performs well in clean flue gas and dry heat exposure • Thermal reliability – Withstands repeated heating cycles without deformation • Custom-fit geometry – Formed to match exact bend radius for tight coverage • Versatile installation – Can be clamped, banded, or tack welded as needed • Multiple sizes – Offered in a variety of thicknesses, lengths, and radii Applications • Thermal power stations – Shields steam lines and return bends from surface scaling • Waste heat boilers – Guards tube bends in clean gas recovery systems • Process heaters – Used in less corrosive gas heating environments • Cement and food processing industries – Protects tube curves from oxidation Conclusion The SS 430 Outer Half Round 90 Degree Bend Tube Shield by Ladhani Metal Corporation provides durable and cost-efficient protection for tube bends exposed to dry heat, oxidation, and moderate wear. With good formability and thermal performance, these shields are ideal for systems where corrosion levels are controlled but mechanical shielding is essential. For custom sizing, material selection, or technical specifications, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #halftubeshield #utypehalftubeshield #tubeshieldexporter

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are designed to protect heat exchanger, boiler, and superheater tubes from erosion, scaling, slag deposition, and corrosion under high-temperature operating conditions. These shields are widely used in industries such as power generation, petrochemical processing, waste heat recovery, and chemical manufacturing. Their half-round structure allows for quick installation over curved or straight tube sections, providing dependable protection and extending equipment lifespan without requiring major disassembly. SS 316L U Type Inner Half Round Tube Shield The SS 316L U Type Inner Half Round Tube Shield is fabricated from low-carbon austenitic stainless steel grade 316L. It offers superior corrosion resistance, particularly in chloride-rich or acidic environments, and improved weldability with reduced risk of intergranular corrosion after welding. The inner U-type configuration is specifically engineered to shield the inner arc of U-bend tubes—an area highly vulnerable to turbulence-induced erosion, scaling, and thermal fatigue. • Inner U Type Half Round Tube Shield – Designed to protect the inner curvature of U-bend tubes from flue gas turbulence, localized corrosion, and heat-induced scaling. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of SS 316L U Type Inner Half Round Tube Shields, providing durable and customizable shielding solutions for demanding thermal and corrosive applications. Chemical Composition of SS 316L – Low Carbon Austenitic Stainless Steel • Carbon (C): ≤ 0.035% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% • Iron (Fe): Balance Applications: Ideal for welded systems and high-temperature environments exposed to chlorides, acidic gases, or steam, where resistance to corrosion and thermal degradation is essential. Uses • Shields inner arcs of U-bend tubes in boilers, superheaters, and reheaters operating in corrosive and high-heat zones • Installed in return bends of waste heat recovery boilers (WHRBs) and HRSGs subjected to scaling and slag formation • Used in curved tube sections of steam reformers, condensers, and marine heat exchangers • Applied in chemical and fertilizer plants with exposure to acidic, chloride-rich, or humid gases • Suitable for welded assemblies where protection against intergranular corrosion is necessary Features • Excellent corrosion resistance – Enhanced performance in acidic, chloride-laden, and high-moisture environments • Low carbon content – Minimizes risk of intergranular corrosion after welding or high-temperature service • Inner bend protection – Shields areas affected by turbulence, localized heat, and erosion • High-temperature durability – Performs reliably in oxidizing environments up to 870°C • Custom fabrication – Tailored to match specific tube diameters and bend radii for a secure, gap-free fit • Easy installation – Suitable for clamp-on, banding, or weld-on mounting without requiring full system disassembly Applications • power generation – Inner U-type shields for protecting boiler and economizer bends in thermal power stations • petrochemical facilities – Guards internal tube bends exposed to chlorides and hot process gases in reformers • waste heat recovery systems – Applied to WHRBs and HRSGs for inner arc protection from flue gas scaling • chemical processing units – Used in reactors and exchanger coils to resist chemical and thermal corrosion • marine and offshore systems – Ensures long-term durability of U-bends exposed to saltwater-laden environments Conclusion The SS 316L U Type Inner Half Round Tube Shield by Ladhani Metal Corporation – manufacturer, supplier, and exporter – is a reliable and corrosion-resistant protective component designed for inner arc shielding in U-bend tubes operating under harsh thermal and chemical conditions. With its superior weldability, resistance to pitting, and high-temperature strength, it is ideal for critical service in energy, chemical, and marine applications. For technical support, custom specifications, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-designed components used to protect boiler, superheater, and heat exchanger tubes from erosion, slag accumulation, scaling, and high-temperature oxidation. These shields are essential for industrial systems exposed to intense thermal cycling, high-velocity flue gases, and corrosive atmospheres. Their half-round form ensures quick and secure installation over curved or straight tube surfaces, significantly enhancing tube durability and reducing downtime. 1Cr20Ni14Si2 U Type Outer Half Round Tube Shield The 1Cr20Ni14Si2 U Type Outer Half Round Tube Shield is made from a high-performance austenitic stainless steel alloy containing 20% chromium, 14% nickel, and approximately 2% silicon. This alloy provides excellent resistance to oxidation, high-temperature corrosion, and thermal fatigue, especially in oxidizing and carburizing environments. The outer U-type design is specifically intended to protect the outer arc of U-bend tubes in boilers, reformers, and heat exchangers, where flame, gas flow, and slag buildup cause the most wear. • Outer U Type Half Round Tube Shield – Shields the outer curvature of U-bend tubes from flame impingement, gas erosion, slag attack, and thermal scaling. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of 1Cr20Ni14Si2 U Type Outer Half Round Tube Shields, offering custom-built shielding solutions for critical high-temperature and industrial systems. Chemical Composition of 1Cr20Ni14Si2 – Austenitic Heat-Resistant Stainless Steel • Carbon (C): ≤ 0.10% • Manganese (Mn): ≤ 1.50% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): 1.50 – 2.50% • Chromium (Cr): 19.0 – 21.0% • Nickel (Ni): 13.0 – 15.0% • Iron (Fe): Balance Applications: Best suited for high-temperature, oxidizing environments in power generation, chemical processing, and furnace systems where excellent thermal and scaling resistance are required. Uses • Outer arc protection for U-bend tubes in superheaters and reheaters in thermal power plants • Shields return bends in heat exchangers and steam reformers exposed to hot gases and flame • Used in waste heat recovery boilers (WHRBs) and HRSGs to prevent surface oxidation and slag damage • Suitable for petrochemical and chemical reactors operating under oxidizing or mildly carburizing conditions • Applied in high-temperature industrial furnaces, incinerators, and reforming equipment Features • Excellent high-temperature resistance – Withstands service temperatures up to 1100°C with minimal deformation or scaling • Oxidation and corrosion resistance – High Cr-Ni-Si composition forms a stable oxide layer for prolonged exposure protection • Outer bend coverage – Provides critical protection for the most exposed and erosion-prone section of U-bend tubes • Custom fabrication – Manufactured to match exact tube radius and diameter, ensuring a precise and stable fit • Easy installation – Secured with clamps, tack welds, or stainless steel banding without disassembly • Long-lasting performance – Enhances operational life and minimizes costly tube replacements in aggressive environments Applications • thermal and power generation – Protects outer U-bend tube surfaces from slag, soot, and flue gas corrosion • petrochemical and refining – Shields return bends in reformers and heaters exposed to oxidizing and sulfur-rich gases • waste heat recovery – Guards outer tube arcs in WHRBs and HRSGs against scaling and erosion • metallurgy and cement processing – Used in high-temperature pipelines and ducts in furnaces and kilns • process heating systems – Ideal for environments involving intense flame exposure and cyclic thermal loads Conclusion The 1Cr20Ni14Si2 U Type Outer Half Round Tube Shield by Ladhani Metal Corporation—manufacturer, supplier, and exporter—is a highly durable, heat-resistant shielding solution for protecting U-bend tube outer surfaces in extreme industrial environments. With superior resistance to oxidation, scaling, and thermal fatigue, it ensures long-term reliability and efficiency in power plants, reformers, and furnace systems. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered components used to protect heat exchanger and boiler tubes from erosion, scaling, slag buildup, and high-temperature oxidation. These shields are commonly applied in thermal and industrial systems where tubes are exposed to flue gases, particulate flow, and repeated thermal cycling. The half-round design ensures secure and efficient coverage over straight or curved tube sections, reducing maintenance needs and enhancing tube lifespan. SS 430 U Type Outer Half Round Tube Shield The SS 430 U Type Outer Half Round Tube Shield is fabricated from SS 430, a ferritic stainless steel known for its good corrosion resistance, oxidation resistance, and excellent formability. This outer U-type shield is specifically designed to protect the outer arc of U-bend tubes in boilers, heat exchangers, and recovery systems. SS 430 is highly resistant to stress corrosion cracking and scaling in mildly corrosive and high-temperature environments, making it a cost-effective solution for less aggressive service conditions. • Outer U Type Half Round Tube Shield – Shields the outer curvature of U-bend tubes against heat, slag, soot erosion, and surface oxidation from flue gases. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of SS 430 U Type Outer Half Round Tube Shields, offering dependable protection for boiler and exchanger tube bends in moderate-temperature industrial environments. Chemical Composition of SS 430 – Ferritic Stainless Steel • Carbon (C): ≤ 0.12% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): ≤ 0.75% • Iron (Fe): Balance Applications: Ideal for moderate-temperature, mildly corrosive environments where oxidation resistance and mechanical durability are required. Uses • Outer bend protection of U-tubes in reheaters and superheaters in thermal power generation systems • Shielding of external arcs in waste heat recovery units and heat exchangers exposed to dry or clean flue gases • Coverage of U-bend tubes in utility boilers and economizers with low chloride or sulfuric gas exposure • Suitable for food processing and clean air systems requiring stable performance under elevated temperatures • Used in systems where stress corrosion cracking resistance and cost-effective shielding are priorities Features • Good corrosion and oxidation resistance – Chromium-rich alloy resists surface oxidation and rust formation at elevated temperatures • Outer arc coverage – Provides mechanical and thermal shielding for the most exposed curve of U-bend tubes • Thermal stability – Performs reliably in temperatures up to 815°C with good resistance to scaling and heat stress • Easy installation – Can be mounted using clamps, banding, or tack welding without requiring disassembly of the system • Precision fit – Custom-fabricated to fit specific tube diameters and radii, ensuring secure, movement-free installation • Economical solution – Offers dependable performance at a lower cost compared to austenitic stainless steels Applications • thermal and captive power plants – Installed on U-bend outer arcs in superheaters and economizers exposed to moderate flue gases • heat recovery systems – Shields bends in WHRB and HRSG systems operating under low-corrosive and oxidizing conditions • general industrial boilers – Protects tube surfaces from surface scaling and minor gas abrasion • process industries – Suitable for clean air and low-chloride gas systems in the food, paper, or light chemical sectors • HVAC and ventilation systems – Used in exhaust and heating systems requiring corrosion-resistant but cost-effective shielding Conclusion The SS 430 U Type Outer Half Round Tube Shield by Ladhani Metal Corporation—manufacturer, supplier, and exporter—is a cost-effective and reliable protective component for U-bend tube outer surfaces in industrial systems. With good oxidation resistance, structural integrity under moderate heat, and easy installation, it is ideal for power plants, recovery systems, and clean process industries where durable but economical shielding is required. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are high-precision protective elements designed to safeguard boiler and heat exchanger tubes against mechanical wear, erosion, and high-temperature gas attack. These shields are essential in industrial systems where exposure to thermal cycling, high-velocity gases, and abrasive particles can rapidly degrade unprotected tubing. SS 410 Half Round Tube Shield The SS 410 Half Round Tube Shield is a semi-cylindrical tube protector manufactured using stainless steel grade 410. As a martensitic stainless steel, SS 410 offers a unique combination of good corrosion resistance, high mechanical strength, and excellent wear resistance. It is particularly suitable for environments with moderate corrosion exposure and significant mechanical stress. The half-round shape is precisely formed to ensure a tight fit over exposed tubes, providing a durable and reliable barrier that extends tube service life in industrial boilers, heat exchangers, and process equipment. Chemical Composition of SS 410 – Martensitic Stainless Steel • Carbon (C): 0.08 – 0.15% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 11.5 – 13.5% • Nickel (Ni): ≤ 0.75% • Iron (Fe): Balance Uses • Boiler Tube Protection – Provides abrasion and erosion resistance in utility and industrial boilers where tubes face harsh combustion environments. • Heat Exchanger Shielding – Reduces mechanical wear caused by high flow velocities and particulate impact in condensers and evaporators. • Furnace Tube Safeguarding – Protects radiant and convection tubes from scale buildup and flame impingement in high-temperature furnace applications. • Steam and Process Line Protection – Extends the life of piping systems in moderately corrosive environments with mechanical stress. • Air Preheater and Economizer Units – Shields tubes from dust-laden gas erosion in flue gas recovery systems. Features • Excellent Wear Resistance – High hardness and toughness of SS 410 make it ideal for shielding tubes exposed to abrasive flows or soot-blowing operations. • Good Oxidation Resistance – Performs reliably in mildly corrosive and oxidizing environments up to 650°C (1200°F). • High Strength – Provides superior mechanical durability under vibration, pressure, and impact loading conditions. • Easy to Fabricate and Install – Half-round design allows for quick field installation and secure clamping or welding without altering system layout. • Economical Option – Offers a cost-effective tube protection solution where severe corrosion resistance is not critical. • Customization – Available in different thicknesses, diameters, lengths, and surface finishes (pickled or bright annealed). Applications • Thermal Power Plants – Used in boiler and superheater tubes to resist wear from flue gas erosion and thermal fluctuations. • Cement and Steel Industries – Protects tubes in high-wear areas exposed to dust, ash, and scale in kilns, coolers, and furnaces. • Oil Refineries – Applied in areas where high strength is required along with moderate corrosion resistance, such as preheaters or tube bundles. • Chemical Plants – Suitable for process tubes in mildly corrosive environments with strong flow dynamics or steam load cycling. • Pulp and Paper Industry – Shields tubes in recovery and power boilers exposed to high-pressure steam and abrasive residues. • Biomass and Waste-to-Energy Plants – Guards against erosion from fly ash and combustion residues in environmentally demanding systems. Conclusion The SS 410 Half Round Tube Shield from Ladhani Metal Corporation is a robust and reliable solution for protecting critical tube systems subjected to mechanical wear and thermal stress. Its excellent hardness and strength make it especially effective in applications involving high-velocity gas flow, abrasive particles, and fluctuating temperatures. While not suited for highly corrosive environments, SS 410 excels in systems where durability, cost-efficiency, and resistance to erosion are key priorities. With customizable sizing and expert engineering support, Ladhani Metal Corporation ensures dependable, application-specific shielding solutions for a wide range of industries. For technical specifications, fabrication assistance, or pricing inquiries, please contact Ladhani Metal Corporation.

DIN 2634 titanium flanges PN 25 are high-performance weld neck flanges manufactured in accordance with the DIN 2634 standard. Specifically engineered for high-pressure applications up to 25 bar (362 psi), these flanges are made from premium titanium grades, offering exceptional corrosion resistance, low density, and outstanding mechanical strength even in the most demanding environments. Their lightweight yet highly durable nature makes them ideal for aggressive service conditions where conventional metal flanges may fail. Ladhani Metal Corporation is a trusted global manufacturer and supplier of titanium flanges, known for advanced manufacturing capabilities, precision machining, and strict adherence to international quality standards. Each flange undergoes thorough inspection and testing to ensure long-term reliability, safety, and resistance to extreme operating conditions. Pressure Rating: • PN 25 (25 bar / 362 psi): Designed for high-pressure systems requiring corrosion-resistant and mechanically robust flange connections. Flange Type: • Weld Neck Flanges Featuring an extended tapered hub, weld neck flanges provide excellent stress distribution at the base, ensuring strong and leak-proof joints in systems exposed to high pressure and thermal cycling. • Flat Face (FF) Flanges Ideal for use with softer gasket materials or in systems connecting to cast components, flat face flanges offer consistent and uniform gasket compression. Titanium Grades and Typical Composition: Titanium Grade 2 (UNS R50400) – Commercially Pure Titanium • Titanium (Ti): ≥ 98.9% • Iron (Fe): ≤ 0.30% • Oxygen (O): ≤ 0.25% • Carbon (C): ≤ 0.08% • Nitrogen (N): ≤ 0.03% • Hydrogen (H): ≤ 0.015% Applications: Preferred in seawater service, chemical processing, and marine equipment where high corrosion resistance in oxidizing environments is required. Titanium Grade 5 (Ti-6Al-4V / UNS R56400) – Alloyed Titanium • Titanium (Ti): Balance • Aluminum (Al): 5.5 – 6.75% • Vanadium (V): 3.5 – 4.5% • Iron (Fe): ≤ 0.40% • Oxygen (O): ≤ 0.20% Applications: Used in high-strength and high-temperature applications, including aerospace systems, pressure vessels, and heat exchangers due to its superior strength-to-weight ratio and fatigue resistance. Applications of DIN 2634 Titanium Flanges PN 25: • Offshore and Marine Systems Resists corrosion from seawater and brine solutions while maintaining strength under pressure. • Chemical and Petrochemical Processing Ideal for transporting corrosive media such as chlorine, acids, and alkalis at elevated pressures. • Desalination Plants Performs exceptionally in salt-laden and high-pressure water processing systems. • Aerospace and Defense Equipment Used in high-performance fluid systems requiring lightweight and high-strength components. • Pharmaceutical and Medical Systems Applied in ultra-clean and sterile environments where corrosion-free operation is essential. Key Features: • Manufactured in accordance with DIN 2634 dimensional and pressure requirements • PN 25 pressure rating supports high-pressure applications • Lightweight construction reduces system weight without compromising strength • Exceptional resistance to corrosion, erosion, and high-temperature oxidation • Weld neck configuration ensures strong, vibration-resistant joints • Available in commercially pure and alloyed titanium grades • Custom sizes, pressure classes, and surface finishes available upon request Conclusion: DIN 2634 titanium flanges PN 25 from Ladhani Metal Corporation are engineered to perform in extreme conditions where high pressure, aggressive media, and corrosion resistance are critical. With superior mechanical strength and long-term durability, these titanium flanges are ideal for advanced applications in marine, chemical, aerospace, and industrial systems. For technical consultations, specialized requirements, or pricing information, contact Ladhani Metal Corporation today.

DIN 2633 super duplex steel flanges PN 16 are high-performance weld neck flanges manufactured in accordance with the DIN 2633 standard. Engineered for medium-pressure piping systems with a pressure rating of up to 16 bar (232 psi), these flanges are made from super duplex stainless steels, which offer a superior combination of high mechanical strength and outstanding corrosion resistance. They are specifically designed for critical applications in aggressive environments where standard stainless or duplex steels may not provide sufficient durability. Ladhani Metal Corporation is a globally recognized manufacturer and supplier of super duplex steel flanges, known for precision manufacturing, strict quality control, and compliance with international material and dimensional standards. Each flange is tested for performance, safety, and resistance to harsh operating conditions. Pressure Rating: • PN 16 (16 bar / 232 psi): Suitable for systems requiring secure, corrosion-resistant, and high-strength connections under moderate pressure. Flange Type: • Weld Neck Flanges Featuring a long tapered hub, these flanges offer optimal stress distribution, reduce turbulence at the joint, and ensure reliable pipe alignment in high-stress environments. • Flat Face (FF) Flanges Designed for uniform gasket compression, particularly effective when used with soft gaskets or cast iron mating components. Super Duplex Steel Grades and Full Composition: Super Duplex 2507 (UNS S32750) • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 6.0 – 8.0% • Molybdenum (Mo): 3.0 – 5.0% • Nitrogen (N): 0.24 – 0.32% • Manganese (Mn): ≤ 1.2% • Silicon (Si): ≤ 0.8% • Carbon (C): ≤ 0.03% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.02% • Iron (Fe): Balance Applications: Ideal for offshore platforms, subsea systems, desalination plants, chemical process systems, and high-chloride environments requiring superior corrosion and pitting resistance. Super Duplex S32760 • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 6.0 – 8.0% • Molybdenum (Mo): 3.0 – 4.0% • Tungsten (W): 0.5 – 1.0% • Copper (Cu): 0.5 – 1.0% • Nitrogen (N): 0.2 – 0.3% • Carbon (C): ≤ 0.03% • Iron (Fe): Balance Applications: Commonly used in seawater systems, heat exchangers, fire-fighting systems, and oil & gas equipment due to excellent resistance to erosion, stress corrosion cracking, and fatigue. Applications of DIN 2633 Super Duplex Steel Flanges PN 16: • Offshore Oil and Gas Platforms Resists chloride-induced corrosion and high mechanical loads in topside and subsea installations. • Desalination and Marine Systems Performs well in high-salinity environments where other alloys may suffer from pitting or crevice corrosion. • Chemical and Petrochemical Plants Suitable for handling strong acids, caustic solutions, and oxidizing environments at elevated temperatures and pressures. • Fire Protection and Water Injection Systems Ensures reliability and corrosion resistance in safety-critical and high-pressure fluid delivery systems. • Pulp and Paper Industry Used in bleach plant systems and recovery boilers where exposure to corrosive agents is routine. Key Features: • Manufactured in compliance with DIN 2633 standards • PN 16 pressure rating for medium-pressure service • Weld neck design ensures secure, vibration-resistant connections • Available in high-strength super duplex grades S32750 and S32760 • Excellent resistance to pitting, crevice corrosion, and stress corrosion cracking • High mechanical strength and fatigue resistance • Custom sizes, coatings, and pressure classes available upon request Conclusion: DIN 2633 super duplex steel flanges PN 16 from Ladhani Metal Corporation are designed to meet the most demanding operational requirements in highly corrosive and high-pressure environments. With unmatched strength and corrosion resistance, these flanges are ideal for offshore, marine, chemical, and industrial applications. For technical specifications, custom designs, or pricing information, contact Ladhani Metal Corporation today.