Half Round Tube Shield Ladhani Metal Corporation manufactures 1Cr13 Half Round Straight Tube Shields to protect boiler and heat exchanger tubes from erosion, corrosion, and high-temperature wear. 1Cr13 is a martensitic stainless steel containing approximately 13% chromium, offering moderate corrosion resistance and high strength at elevated temperatures. It is suitable for service in mildly corrosive environments and where mechanical stress and abrasive flue gas contact are prevalent. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of 1Cr13 Half Round Straight Tube Shields, offering consistent quality and customized solutions for industrial thermal systems. Material Grade 1Cr13 – A martensitic stainless steel known for good mechanical strength and moderate corrosion resistance in dry, oxidizing conditions. Chemical Composition of 1Cr13 • Carbon (C): 0.15 – 0.20% • Silicon (Si): ≤ 0.60% • Manganese (Mn): ≤ 0.60% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Chromium (Cr): 12.0 – 14.0% • Iron (Fe): Balance Applications: Recommended for erosion protection in boiler systems operating in dry flue gas or mildly corrosive service environments. Uses • Straight tube protection in industrial and utility boilers • Economizer and preheater shielding in thermal plants • Flue gas path erosion prevention in WHRBs • Wear-resistant layer in ash-prone ducting systems • Protective shielding in steam air heaters and gas coolers Features • Moderate corrosion and oxidation resistance at elevated temperatures • Good hardness and wear resistance under mechanical stress • Cost-effective solution for general tube protection • Customizable size and thickness to suit specific tube geometries • Compatible with banded, clamped, or welded installation methods • Increases tube durability and reduces operational downtime Applications • power generation – Economizer, LTSH, and convection section tube protection • pulp and paper – Shielding of tubes exposed to process gases • cement industry – Protection in preheater and kiln gas areas • food and textile industries – Used in clean gas heating systems • general boilers – Applied in tube banks subject to gas erosion Conclusion 1Cr13 Half Round Straight Tube Shields from Ladhani Metal Corporation deliver reliable mechanical and thermal protection for tubes in industrial heat systems. Their strength and wear resistance make them a practical choice for reducing maintenance costs and prolonging tube service life. To request a quote or custom configuration, contact Ladhani Metal Corporation. #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #halftubeshield #utypehalftubeshield #tubeshieldexporter #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur

1Cr20Ni14Si2 Half Round Straight Tube Shield The 1Cr20Ni14Si2 Half Round Straight Tube Shield is formed in a semi-cylindrical shape to shield the outer surface of straight tubes from ash erosion, thermal scaling, and high-velocity gas flow. These shields are crucial for preventing tube wall thinning, cracking, and performance deterioration in systems operating under frequent temperature fluctuations or corrosive gas atmospheres. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of 1Cr20Ni14Si2 Half Round Straight Tube Shields, delivering dimensionally accurate and corrosion-resistant solutions for demanding industrial operations. Material Grade 1Cr20Ni14Si2 – A heat-resistant stainless steel alloy with high chromium and nickel content, enhanced with silicon for improved oxidation resistance and thermal strength. Chemical Composition of 1Cr20Ni14Si2 • Carbon (C): ≤ 0.10% • Silicon (Si): 1.50 – 2.50% • Manganese (Mn): ≤ 1.50% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Chromium (Cr): 19.0 – 21.0% • Nickel (Ni): 13.0 – 15.0% • Iron (Fe): Balance Uses • Straight tube shielding in waste heat recovery boilers and reformers • Surface protection in convection zones of fired heaters and steam boilers • Tube erosion control in thermal oxidizers and flue gas paths • High-temperature corrosion resistance in petrochemical reactors • Applied in furnace chambers, radiant coils, and syngas coolers Features • Outstanding oxidation and scaling resistance at elevated temperatures • High strength under thermal cycling and mechanical stress • Protects against ash and gas erosion in boiler and furnace systems • Custom-fit shields available in various lengths and thicknesses • Suitable for banding, welding, or clamping installation methods • Enhances tube life and reduces maintenance frequency Applications • power generation – Boilers, WHRBs, and economizers in thermal plants • chemical and fertilizer industry – Reformers, converters, and synthesis gas lines • metallurgy – Furnace tube protection in steel and heat treatment facilities • refineries – Process heater protection in crude and catalytic reformers • incineration – Combustion tube protection in waste-to-energy plants Conclusion 1Cr20Ni14Si2 Half Round Straight Tube Shields from Ladhani Metal Corporation are engineered to perform under high thermal loads and corrosive conditions. Their robust design and material strength make them ideal for protecting straight tubes in critical heat transfer systems, extending service life and maintaining operational efficiency. For detailed specifications, custom orders, or inquiries, contact Ladhani Metal Corporation. #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #halftubeshield #utypehalftubeshield #tubeshieldexporter #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur

Half Round Tube Shield Ladhani Metal Corporation manufactures 1Cr25Ni20Si2 Half Round Straight Tube Shields to deliver exceptional protection to straight boiler and heat exchanger tubes in aggressive high-temperature environments. 1Cr25Ni20Si2 Half Round Straight Tube Shield The 1Cr25Ni20Si2 Half Round Straight Tube Shield is fabricated in a semi-cylindrical form to protect the outer surface of straight tubes from scaling, tube wall thinning, and structural damage caused by hot combustion gases or ash-laden flows. Its high silicon content improves oxidation resistance and inhibits the formation of brittle scales, while the alloy’s high-temperature stability ensures long service life under cyclic heating and cooling operations. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of 1Cr25Ni20Si2 Half Round Straight Tube Shields, offering precise fit and durable tube protection across thermal and petrochemical industries. Material Grade 1Cr25Ni20Si2 – High-chromium, high-nickel heat-resistant alloy with enhanced silicon for improved oxidation and thermal shock resistance. Chemical Composition of 1Cr25Ni20Si2 • Carbon (C): ≤ 0.10% • Silicon (Si): 1.50 – 2.50% • Manganese (Mn): ≤ 1.50% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Uses • Radiant section protection in waste heat boilers and reformers • Straight tube shielding in high-temperature furnaces • Heat recovery units in ammonia, hydrogen, and methanol plants • Erosion control in fluidized bed combustion systems Features • Excellent oxidation and scaling resistance at high temperatures • High thermal stability under long-term service • Superior resistance to carburization and sulfidation • Durable against erosion from high-velocity gas and ash • Maintains mechanical integrity under thermal shock • Custom-fabricated to match tube size, radius, and operational needs Applications • petrochemical and fertilizer plants – For reformer and convection section protection • power generation – In boilers, WHRBs, and waste incinerators • thermal process systems – For furnace and heat exchanger tube shielding • hydrogen and ammonia production – Suitable for synthesis gas environments • metallurgy – For steel reheating furnaces and heat treatment zones Conclusion 1Cr25Ni20Si2 Half Round Straight Tube Shields from Ladhani Metal Corporation are engineered for performance in the harshest high-temperature environments. Their robust composition and resistance to thermal and chemical degradation make them essential for extending the life of straight tubes exposed to extreme flue gas conditions. For orders, custom fabrication, and technical support, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #halftubeshield #utypehalftubeshield #tubeshieldexporter

Half Round Tube Shield Ladhani Metal Corporation manufactures SS 410 Half Round Straight Tube Shields to offer cost-effective protection for boiler and heat exchanger tubes in moderate temperature and corrosive environments. SS 410 is a martensitic stainless steel that provides good corrosion resistance, mechanical strength, and wear resistance, making it suitable for shielding straight tubes exposed to flue gas erosion, ash deposits, and mild chemical exposure. SS 410 Half Round Straight Tube Shield The SS 410 Half Round Straight Tube Shield is designed to fit over the external surface of straight tubes, acting as a barrier against abrasive particles, high-velocity flue gases, and mechanical wear. It is widely used in power plants, waste heat recovery systems, and steam processing units where cost-effective protection is needed for tubes operating at medium temperatures. The material offers ease of fabrication and reliable resistance to oxidation up to 650°C. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of SS 410 Half Round Straight Tube Shields, delivering durable thermal protection for industrial piping systems. Material Grade SS 410 – Martensitic stainless steel known for its hardness, oxidation resistance, and moderate corrosion protection. Chemical Composition of SS 410 • Carbon (C): 0.08 – 0.15% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 11.5 – 13.5% • Iron (Fe): Balance Applications: Suitable for environments involving dry flue gases, fly ash, and light acidic fumes; commonly used in economizers and low-temperature steam sections. Uses • Straight tube protection in boilers and economizers • Installed in air preheaters and low-temperature superheaters • Applied in WHRBs to guard tubes from ash and erosion • Used in industrial steam systems with mild corrosion risk • Shields tubes in pulp, paper, and food processing units Features • Good oxidation resistance – Up to moderate temperatures (~650°C) • High hardness – Offers resistance against flue gas abrasion and ash impact • Cost-effective – Economical choice for medium-duty service • Easy to fabricate and weld – Suitable for various attachment methods • Customizable – Available in different sizes, lengths, and thicknesses • Enhances tube durability – Reduces wear and minimizes shutdowns Applications • thermal power plants – Used in low-heat sections for erosion protection • steam processing – Protects steam-carrying tubes from scale and impact • waste heat recovery units – Resists abrasive exhaust gases and particulate matter • cement and steel plants – Applied in dust-prone, dry gas environments • food and chemical industries – Suitable for non-aggressive process gas shielding Conclusion The SS 410 Half Round Straight Tube Shield from Ladhani Metal Corporation is a practical and robust solution for extending the life of tubes operating under dry, abrasive, and moderately corrosive service conditions. Its hardness and heat resistance make it ideal for protecting straight tube sections in a wide range of industrial systems. For standard and custom configurations, contact Ladhani Metal Corporation for technical consultation and orders.

SS 310S Half Round Straight Tube Shield Half Round Tube Shield Ladhani Metal Corporation manufactures SS 310S Half Round Straight Tube Shields designed to protect straight boiler and heat exchanger tubes from high-temperature oxidation, corrosion, and mechanical erosion. SS 310S is a low-carbon version of SS 310, offering enhanced weldability and resistance to sensitization during thermal exposure. These shields are especially suited for harsh environments involving continuous or cyclic high heat, making them ideal for industrial boilers, fired heaters, and heat recovery systems. SS 310S Half Round Straight Tube Shield The SS 310S Half Round Straight Tube Shield is fabricated to tightly fit over straight tube surfaces, offering durable protection in thermal processing units. Its resistance to scaling at temperatures up to 1100°C and excellent mechanical strength under elevated temperatures makes it reliable for shielding heat-affected tubes. With easy installation methods such as tack welding, clamping, or banding, these shields minimize downtime and maintenance in critical operations. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of SS 310S Half Round Straight Tube Shields, offering custom solutions to meet the demanding conditions of thermal power plants, petrochemical facilities, and steam reformers. Material Grade SS 310S – Austenitic stainless steel with low carbon content and superior heat and oxidation resistance. Chemical Composition of SS 310S • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.50% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Applications: Recommended for continuous high-temperature service in aggressive gas environments, especially where welding and corrosion resistance are key. Uses • Shielding straight tubes in superheaters, reheaters, and steam coil systems • Protection against flue gas erosion in waste heat boilers • Heat shielding in fired process heaters and refinery furnaces • Lining straight tube segments in chemical and fertilizer heat exchangers • Defending against scaling and surface degradation in steam reformers Features • Low carbon for better weldability – Prevents sensitization and intergranular corrosion • High resistance to scaling – Maintains integrity under continuous exposure to extreme heat • Durable and long-lasting – Withstands mechanical and thermal fatigue • Available in custom sizes – Fabricated to match exact tube diameters and operating conditions • Quick installation – Compatible with standard weld-on, clamp-on, or banded attachment methods • High service life – Reduces tube wear and lowers maintenance frequency Applications • power generation – Installed on straight boiler tubes in areas with high thermal load and flue gas flow • refineries – Protects tubes in process heaters from oxidation and heat-related damage • petrochemical plants – Used in straight sections of heat exchangers and reformer coils • WHRB systems – Improves durability of tubes in gas turbine exhaust recovery units • fertilizer industry – Extends lifespan of tube sections exposed to acidic and high-temperature gas streams Conclusion The SS 310S Half Round Straight Tube Shield from Ladhani Metal Corporation provides superior protection in high-temperature environments, offering excellent oxidation resistance, long-term structural performance, and easy adaptability. Its low carbon content makes it suitable for welded applications where corrosion resistance must be preserved. Engineered for precision and performance, this shield is a reliable choice for heavy-duty thermal systems. For technical assistance, custom orders, or quotes, contact Ladhani Metal Corporation.

Half Round Tube Shield Ladhani Metal Corporation manufactures SS 310 Half Round Straight Tube Shields to protect boiler and heat exchanger tubes from high-temperature corrosion, oxidation, and erosion. These shields are precisely engineered to conform to straight tube surfaces and serve as a protective barrier in harsh thermal environments. SS 310 is an austenitic stainless steel known for its high chromium and nickel content, offering excellent resistance to oxidation and scaling at elevated temperatures. SS 310 Half Round Straight Tube Shield The SS 310 Half Round Straight Tube Shield is specifically designed for applications involving intense heat and corrosive gas flow. With its superior resistance to oxidation and sulfidation, this shield is ideal for straight tube sections in boilers, superheaters, reformers, and high-temperature process equipment. The half-round shape allows for secure placement while maintaining ease of installation and servicing. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of SS 310 Half Round Straight Tube Shields, delivering high-performance tube protection solutions for power generation, petrochemical, and thermal processing industries. Material Grade SS 310 – High-temperature austenitic stainless steel with enhanced resistance to oxidation and thermal fatigue. Chemical Composition of SS 310 • Carbon (C): ≤ 0.25% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.50% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Applications: Suitable for environments with elevated temperatures, thermal cycling, and aggressive flue gas exposure. Uses • Protecting straight tubes in superheaters and reheaters • Shielding economizer sections in boilers • Used in steam reformers and furnace tube systems • Applied in petrochemical heat recovery and cracking units • Installed in chemical and fertilizer plants handling hot process gases Features • High oxidation resistance – Performs reliably at temperatures up to 1100°C • Excellent scaling resistance – Chromium-nickel alloy composition minimizes metal loss • Structural integrity – Maintains strength under prolonged thermal cycling • Custom design – Fabricated to fit tube diameter, thickness, and required length • Easy to install – Secures in place with clamps, tack welds, or metal straps • Extended durability – Minimizes downtime and maintenance in harsh environments Applications • thermal power stations – Shields straight sections of superheater tubes from fly ash and flue gas erosion • oil and gas refineries – Used in fired heaters and steam reforming units exposed to hot corrosive media • waste heat recovery boilers – Enhances protection in high-velocity gas flow zones • process heating systems – Ideal for straight tubes in sulfur recovery, ammonia cracking, and hydrogen production • industrial boilers – Extends tube service life under continuous high-temperature operation Conclusion The SS 310 Half Round Straight Tube Shield from Ladhani Metal Corporation is a proven solution for tube protection in aggressive thermal environments. Its superior heat resistance, oxidation protection, and durable performance make it a trusted choice in power generation, chemical processing, and industrial boiler systems. Customizable to exact dimensions, these shields are designed for long-term service reliability. For detailed specifications, custom configurations, or orders, please contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier

Half Round Tube Shield Ladhani Metal Corporation manufactures SS 304L Half Round Straight Tube Shields designed to protect straight sections of boiler and heat exchanger tubes from erosion, thermal fatigue, and corrosion caused by high-temperature gases and particulate matter. These shields are shaped to conform tightly to the outer tube surface, providing a protective barrier in high-wear zones. The SS 304L material offers excellent weldability and enhanced resistance to intergranular corrosion, making it ideal for shielding tubes in critical thermal environments. SS 304L Half Round Straight Tube Shield The SS 304L Half Round Straight Tube Shield is made from low-carbon austenitic stainless steel (304L), which minimizes carbide precipitation during welding and resists intergranular attack. This makes it especially useful for applications where welding is required during installation. The shield is installed over straight tube sections in boilers, superheaters, economizers, and steam processing equipment to extend tube life and reduce maintenance needs. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of SS 304L Half Round Straight Tube Shields, offering reliable tube protection solutions for industrial heating and energy systems. Material Grade SS 304L – Low-carbon variant of austenitic stainless steel with enhanced corrosion resistance and weldability. Chemical Composition of SS 304L • Carbon (C): ≤ 0.03% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 12.0% • Iron (Fe): Balance Applications: Ideal for systems involving welding, elevated temperatures, and corrosive steam or gas exposure. Uses • Shielding straight tubes in boilers and superheaters • Protection of economizer tubes and reheaters • Used in heat recovery steam generators (HRSGs) • Applied in steam reformers and chemical processing units • Effective in pulp and paper recovery boilers and refinery heaters Features • Intergranular corrosion resistance – Low carbon content prevents sensitization and weld decay • High-temperature strength – Maintains integrity under prolonged heat and gas exposure • Extended tube life – Minimizes erosion, slag buildup, and surface damage • Custom sizing – Available in various diameters, thicknesses, and lengths to match tube dimensions • Simple installation – Mounts securely using clamps, welding, or metal banding • Reduced maintenance – Lowers the need for frequent inspection and tube replacement Applications • power generation – Shields straight tube segments in LTSH and superheater zones from flue gas erosion • petrochemical plants – Protects tubes in high-humidity, chloride, and acidic processing environments • industrial boilers – Enhances tube longevity in zones prone to fly ash and slag contact • waste heat recovery systems – Extends operational life under thermal cycling and gas turbulence • marine boilers – Ideal for use in steam systems aboard ships exposed to saline and humid conditions Conclusion The SS 304L Half Round Straight Tube Shield by Ladhani Metal Corporation provides a robust and corrosion-resistant solution for protecting straight tube sections in thermal processing units. With its low carbon content, superior weldability, and durable performance in high-temperature environments, it is an optimal choice for industries focused on efficiency, reliability, and long service life. For custom fabrication, project-specific designs, or technical support, please contact Ladhani Metal Corporation.

Half Round Tube Shield Ladhani Metal Corporation offers SS 304 Half Round Straight Tube Shields engineered to protect straight sections of boiler and heat exchanger tubes from erosion, scaling, and high-temperature wear. These shields are installed over exposed tube surfaces to serve as a physical barrier against hot flue gases, fly ash, and other abrasive or corrosive elements present in thermal processing systems. The half-round design ensures close contact with the tube, providing effective protection and extended service life. SS 304 Half Round Straight Tube Shield The SS 304 Half Round Straight Tube Shield is designed for use in environments where straight tubes face constant exposure to high-temperature gases and particulate matter. SS 304 is an austenitic stainless steel with excellent corrosion resistance, high-temperature strength, and formability. These properties make it a preferred material for shielding straight tube sections in boilers, waste heat recovery systems, and steam reformers. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of SS 304 Half Round Straight Tube Shields, offering precision-fabricated shielding components for various industrial thermal systems. Material Grade SS 304 – Austenitic Stainless Steel with high chromium and nickel content for enhanced corrosion resistance. Chemical Composition of SS 304 • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 10.5% • Iron (Fe): Balance Applications: Ideal for environments with exposure to steam, hot gases, and corrosive particles where durability and corrosion resistance are essential. Uses • Protection of straight tube sections in boilers and superheaters • Shielding tubes in economizers and HRSG systems • Applied in chemical heat exchangers and refinery heaters • Used in pulp and paper industry recovery boilers • Suited for marine and coastal power plants facing chloride exposure Features • Corrosion resistance – Excellent protection against oxidation, steam, and flue gas attack • Thermal durability – Withstands continuous exposure to elevated temperatures without deformation • Wear resistance – Shields tube surface from impact, erosion, and ash impingement • Custom fabrication – Tailored to tube size, wall thickness, and system layout • Secure installation – Easily mounted with clamps, welding, or stainless-steel banding • Cost-effective – Reduces maintenance frequency and extends tube life Applications • thermal power stations – Prevents tube thinning and cracking in straight sections exposed to ash-laden gas streams • chemical and petrochemical plants – Provides robust shielding for exchanger tubes in corrosive processing environments • waste heat recovery units – Enhances protection in systems where temperature fluctuation and gas velocity are high • industrial boilers – Ensures system reliability and energy efficiency by maintaining tube wall integrity • marine and offshore boilers – Protects tubes from saline steam and acidic corrosion Conclusion The SS 304 Half Round Straight Tube Shield from Ladhani Metal Corporation is a reliable and durable solution for shielding straight tube sections in demanding thermal applications. Manufactured from corrosion-resistant stainless steel and designed for easy installation, these shields provide lasting protection that enhances boiler performance and reduces maintenance downtime. For detailed specifications, custom sizes, or technical support, please contact Ladhani Metal Corporation.

Half Round Tube Shield Ladhani Metal Corporation manufactures high-quality Half Round Tube Shields designed to protect boiler and heat exchanger tubes from erosion, scaling, and thermal fatigue. These shields are especially suited for systems where tubes are exposed to turbulent gas flow, particulate-laden environments, and fluctuating thermal cycles. The semi-cylindrical shape of the shield allows easy installation and reliable surface protection, extending the operational life of the tubes. 1Cr13 Half Round Tube Shield for LTSH Tube The 1Cr13 Half Round Tube Shield is fabricated from martensitic stainless steel containing approximately 13% chromium. Known for its good corrosion resistance, moderate heat resistance, and excellent wear strength, 1Cr13 is suitable for medium-temperature applications, especially in mildly corrosive or oxidizing environments. This makes it an ideal material for shielding LTSH (Low Temperature Superheater) tubes from flue gas erosion and ash abrasion. The Low Temperature Superheater (LTSH) is a section in a boiler where saturated steam from the steam drum is superheated to a moderately higher temperature before entering the high-temperature superheater stages. Positioned in areas with relatively lower flue gas temperatures, the LTSH helps improve thermal efficiency and reduces moisture content in steam. Due to constant exposure to abrasive flue gases and ash, LTSH tubes are prone to wear and require protective shielding, such as half round tube shields, to extend service life. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of 1Cr13 Half Round Tube Shields, delivering durable and cost-effective solutions for various thermal power and heat exchanger applications. Chemical Composition of 1Cr13 – Martensitic Stainless Steel • Carbon (C): 0.15 – 0.20% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 12.0 – 14.0% • Iron (Fe): Balance Applications: Suitable for moderately corrosive and abrasive environments, especially in boiler systems, where mechanical strength and oxidation resistance are required at elevated but controlled temperatures. Uses • Protection of LTSH tubes in thermal power plant boilers • Surface shielding in steam generators and utility boilers • Coverage of superheater coils in flue gas-exposed zones • Suitable for coal-fired and biomass-fired boiler applications • Used in refinery and petrochemical boilers with moderate gas exposure Features • Good corrosion and oxidation resistance – Provides reliable performance in mildly corrosive environments • Wear and erosion resistance – Withstands mechanical wear from ash and soot-laden gas streams • Precise custom fitting – Fabricated to match specific tube diameters and bend radii • Enhanced tube protection – Minimizes wear on LTSH tubes, increasing overall system lifespan • Easy installation – Supports clamp-on, weld-on, and banding installation options • Wide availability – Offered in various lengths, thicknesses, and profiles Applications • power generation – Used in LTSH zones to protect from flue gas erosion and slagging • WHRBs – Shields exposed surfaces of tube bends in waste heat recovery systems • chemical and fertilizer plants – Applied in steam systems requiring moderate temperature durability • cement industry – Suitable for boilers dealing with particulate exhaust gas environments • industrial utility boilers – Enhances tube life in fluctuating thermal load zones Conclusion The 1Cr13 Half Round Tube Shield for LTSH Tube by Ladhani Metal Corporation – manufacturer, supplier, and exporter – is a dependable solution for protecting tube surfaces in moderately corrosive, abrasive, and thermally active environments. Its martensitic stainless composition and mechanical durability make it ideal for power plants and process boilers requiring extended service life with lower maintenance needs. For customized dimensions, technical support, or quotation, contact Ladhani Metal Corporation.