DIN 2633 carbon steel flanges PN 16 are reliable weld neck flanges manufactured in compliance with the DIN 2633 standard. Designed for use in medium-pressure piping systems with a pressure rating of up to 16 bar (232 psi), these flanges are fabricated from high-quality carbon steel, providing dependable mechanical strength and ease of fabrication. They are widely utilized in a range of general industrial and utility applications where corrosion resistance demands are moderate. Ladhani Metal Corporation is a globally trusted manufacturer and supplier of carbon steel flanges, recognized for high-precision production, rigorous quality assurance, and strict adherence to international material and dimensional standards. Every flange is tested to ensure consistent performance, mechanical integrity, and compatibility with a variety of piping systems. Pressure Rating: • PN 16 (16 bar / 232 psi): Suitable for medium-pressure systems requiring strong, cost-effective, and durable connections. Flange Type: • Weld Neck Flanges Featuring an extended tapered hub, weld neck flanges help evenly distribute mechanical stress and ensure secure, vibration-resistant joints, particularly effective in systems subject to bending or thermal expansion. • Flat Face (FF) Flanges Ideal for use with soft gaskets or cast iron components, flat face flanges ensure even gasket compression, reducing the risk of flange warping or over-tightening. Carbon Steel Grades and General Composition: Typical Carbon Steel Grade: ASTM A105 (for forged carbon steel flanges) • Carbon (C): 0.35% max • Manganese (Mn): 0.60 – 1.05% • Phosphorus (P): 0.035% max • Sulfur (S): 0.040% max • Silicon (Si): 0.10 – 0.35% • Iron (Fe): Balance Applications: Carbon steel flanges to DIN 2633 PN 16 are widely applied in environments where corrosion resistance is not the primary concern but where mechanical strength, weldability, and cost-efficiency are essential. Applications of DIN 2633 Carbon Steel Flanges PN 16: • Power Plants Used in steam, water, and air systems for medium-pressure operations. • Water Treatment and Distribution Well-suited for water mains, treatment facilities, and irrigation networks where strength and reliability are critical. • Petrochemical and Refining Industries Employed in non-corrosive process piping, utility lines, and support systems. • HVAC and Fire Protection Systems Ideal for chilled water, fire suppression, and compressed air applications. • General Industrial Manufacturing Used in structural piping systems and mechanical infrastructure with stable temperature and pressure conditions. Key Features: • Manufactured to DIN 2633 specifications • PN 16 pressure rating for medium-duty service • Weld neck configuration provides robust, leak-resistant connections • Cost-effective and easy to fabricate and install • Excellent machinability and weldability • Available in various sizes and configurations • Coating and corrosion protection options available upon request Conclusion: DIN 2633 carbon steel flanges PN 16 from Ladhani Metal Corporation are engineered for dependable performance in standard industrial environments. With proven strength, versatility, and affordability, these flanges are a reliable choice for water, steam, gas, and general utility applications. For detailed technical specifications, custom options, or pricing inquiries, contact Ladhani Metal Corporation today.

DIN 2633 duplex steel flanges PN 16 are precision-manufactured weld neck flanges designed according to the DIN 2633 standard, ideal for medium-pressure piping systems operating up to 16 bar (232 psi). These flanges are crafted from duplex stainless steels that combine the benefits of austenitic and ferritic microstructures, offering excellent mechanical strength, superior resistance to stress corrosion cracking, and enhanced durability in aggressive chemical and chloride-containing environments. They are ideal for applications where both corrosion resistance and high strength are essential. Ladhani Metal Corporation is a leading global manufacturer and supplier of duplex steel flanges, recognized for high-quality production, dimensional accuracy, and strict compliance with international standards. All flanges undergo rigorous inspection and testing to ensure reliable performance in challenging industrial conditions. Pressure Rating: • PN 16 (16 bar / 232 psi): Suitable for medium-pressure pipelines requiring corrosion resistance and increased mechanical integrity. Flange Type: • Weld Neck Flanges These flanges feature a long tapered hub for improved flow characteristics and reduced mechanical stress at the weld area, ensuring stable and secure connections. • Flat Face (FF) Flanges Designed to provide a consistent sealing surface, especially effective when used with soft gaskets or when connecting to cast components. Duplex Steel Grades and Full Composition: Duplex 2205 (UNS S31803/S32205) • Chromium (Cr): 21.0 – 23.0% • Nickel (Ni): 4.5 – 6.5% • Molybdenum (Mo): 2.5 – 3.5% • Nitrogen (N): 0.08 – 0.20% • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Carbon (C): ≤ 0.03% • Phosphorus (P): ≤ 0.03% • Sulfur (S): ≤ 0.02% • Iron (Fe): Balance Applications: Widely used in desalination plants, chemical process vessels, marine environments, and pulp and paper industries due to high strength and resistance to localized corrosion. Super Duplex 2507 (UNS S32750) • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 6.0 – 8.0% • Molybdenum (Mo): 3.0 – 5.0% • Nitrogen (N): 0.24 – 0.32% • Manganese (Mn): ≤ 1.2% • Silicon (Si): ≤ 0.8% • Carbon (C): ≤ 0.03% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.02% • Iron (Fe): Balance Applications: Preferred in highly corrosive offshore, oil and gas, chemical, and high-chloride environments where superior strength and corrosion resistance are essential. Applications of DIN 2633 Duplex Steel Flanges PN 16: • Chemical and Petrochemical Plants Provides strong and corrosion-resistant connections for chemical reactors, storage tanks, and acid-handling systems. • Marine and Offshore Engineering Suitable for submerged systems, seawater cooling, and ballast water piping due to excellent resistance to chloride-induced corrosion. • Pulp and Paper Industry Performs reliably in bleaching and chemical recovery processes where both chemical resistance and strength are required. • Desalination and Water Treatment Ideal for high-salinity water systems and reverse osmosis pipelines requiring durable, corrosion-resistant components. • Oil and Gas Refineries Used in pipelines, pressure vessels, and heat exchangers subjected to sour gas and high-pressure operating environments. Key Features: • Manufactured to DIN 2633 standard • PN 16 pressure class for medium-pressure service • Weld neck configuration supports vibration resistance and proper alignment • Available in Duplex 2205 and Super Duplex 2507 grades • High resistance to stress corrosion cracking, pitting, and crevice corrosion • Excellent mechanical strength and fatigue resistance • Custom sizes, finishes, and specifications available upon request Conclusion: DIN 2633 duplex steel flanges PN 16 from Ladhani Metal Corporation offer an optimal combination of strength, corrosion resistance, and reliability for use in harsh industrial conditions. With high-performance duplex and super duplex materials, these flanges are the preferred choice for applications in chemical processing, offshore platforms, and desalination plants. For detailed technical support, customized configurations, or pricing, contact Ladhani Metal Corporation today.

DIN 2628 Duplex steel flanges PN 250 are high-strength weld neck flanges designed according to the DIN 2628 standard for use in high-pressure systems up to 250 bar (3625 psi). Fabricated from Duplex stainless steels, these flanges offer an ideal balance of strength and corrosion resistance, combining the beneficial properties of both austenitic and ferritic stainless steels. Their robust mechanical performance, excellent resistance to stress corrosion cracking, and superior weldability make them well-suited for critical applications in aggressive service environments. Ladhani Metal Corporation manufactures and exports premium-grade Duplex steel flanges that meet stringent international standards for quality, reliability, and performance. Our DIN 2628 PN 250 Duplex steel weld neck flanges are widely used in sectors such as oil and gas, desalination, petrochemical processing, pulp and paper, and marine industries. With precision engineering and consistent quality, these flanges are designed to withstand high pressure, corrosive media, and mechanical stress. Pressure Rating: • PN 250 (250 bar / 3625 psi): Suitable for high-pressure systems requiring excellent structural integrity, corrosion resistance, and reliable sealing in dynamic conditions. Flange Type: • Weld Neck Flanges These flanges feature a tapered neck, offering high fatigue resistance by reducing stress concentration at the weld area. Ideal for applications with high pressure, high temperature, or repeated thermal cycling. • Flat Face (FF) Flanges Flat face design provides uniform gasket loading, minimizing the risk of flange deformation. Suitable for systems using brittle materials or low-pressure cast components. Duplex Steel Grades and Composition: Duplex 2205 (UNS S32205 / S31803) • Chromium (Cr): 21.0 – 23.0% • Nickel (Ni): 4.5 – 6.5% • Molybdenum (Mo): 2.5 – 3.5% • Nitrogen (N): 0.14 – 0.20% • Iron (Fe): Balance • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Carbon (C): ≤ 0.03% Applications: Offers excellent corrosion resistance, particularly to chloride-induced stress corrosion cracking and pitting. Commonly used in offshore oil rigs, chemical tanks, heat exchangers, and pressure vessels. Applications of DIN 2628 Duplex Steel Flanges PN 250: • Oil and Gas Exploration Resistant to sour gas, chloride attack, and high mechanical loads in subsea and topside environments. • Chemical Processing Plants Used in aggressive chemical systems, reactors, and storage vessels requiring high corrosion resistance. • Marine and Offshore Structures Reliable in saltwater applications, such as ballast systems, risers, and flowlines. • Pulp and Paper Industry Withstands acidic and alkaline process chemicals used in bleaching and pulping operations. • Water Treatment and Desalination Ideal for handling brine and high-chloride content fluids in RO and thermal desalination systems. Key Features: • Conforms to DIN 2628 standards • PN 250 pressure rating for high-pressure, heavy-duty systems • Weld neck configuration for excellent mechanical support and minimal stress concentration • Flat face variant ensures even gasket loading and leak-proof operation • Available in Duplex 2205 and Super Duplex 2507 grades • Excellent resistance to chloride stress corrosion, pitting, and crevice corrosion • High tensile and yield strength for demanding industrial conditions • Custom sizes, pressure ratings, and surface finishes available upon request Conclusion: DIN 2628 Duplex Steel Flanges PN 250 from Ladhani Metal Corporation are the optimal solution for applications requiring superior corrosion resistance, high mechanical strength, and reliable sealing performance under extreme pressure. Available in Duplex 2205 and Super Duplex 2507, these flanges offer outstanding performance across various aggressive industrial environments. For detailed technical specifications or to request a customized quotation, please contact Ladhani Metal Corporation.

DIN 2576 Titanium Flanges PN 10 are premium-quality, slip-on flanges crafted from corrosion-resistant titanium alloys, designed for use in low to medium-pressure piping systems. Produced according to the DIN 2576 standard, these flanges offer exceptional corrosion resistance, lightweight performance, and structural reliability, especially in chemically aggressive and marine environments. The slip-on design allows the flange to slide over the pipe and be welded into place, ensuring proper alignment and mechanical strength across diverse industrial sectors. Ladhani Metal Corporation is a globally recognized manufacturer and exporter of titanium flanges, supplying components that meet stringent international standards for quality, dimension, and performance. DIN 2576 titanium flanges are well-suited for demanding applications where resistance to chlorides, seawater, and strong oxidizers is critical. Pressure Rating: • PN 10 (10 bar / 145 psi): Designed for systems operating under low to moderate pressure, ensuring safe and long-term functionality in fluid, gas, and chemical transport systems. Flange Types: • Slip-On Flanges Designed to slip over the pipe and be welded on both the inside and outside, these flanges provide ease of installation and dependable structural support. • Flat Face (FF) Flanges Used with flat gaskets and flat mating surfaces to ensure proper load distribution and effective sealing, especially when paired with non-metallic or cast components. Titanium Grades and Composition: Titanium Grade 2 (UNS R50400) Composition: • Titanium (Ti): ≥ 98.5% • Iron (Fe), Oxygen (O), Carbon (C), Nitrogen (N), Hydrogen (H): Trace amounts Applications: Commercially pure titanium Grade 2 is known for its excellent corrosion resistance, formability, and weldability. It is widely used in chemical processing, desalination plants, and medical equipment. Titanium Grade 5 (Ti-6Al-4V, UNS R56400) Composition: • Titanium (Ti): Balance • Aluminum (Al): 5.5 – 6.75% • Vanadium (V): 3.5 – 4.5% Applications: Grade 5 titanium offers superior strength and corrosion resistance, making it ideal for high-performance applications such as aerospace systems, offshore platforms, and high-stress piping environments. Applications of DIN 2576 Titanium Flanges: • Chemical and Petrochemical Industries Ideal for systems handling corrosive fluids, acids, and solvents, especially in chlorinated or oxidizing environments. • Desalination and Water Treatment Extensively used in seawater pipelines, brine systems, and high-purity water processing due to titanium’s resistance to chloride attack. • Marine and Offshore Engineering Suitable for shipbuilding, underwater pipelines, and ballast systems where corrosion from saltwater is a major concern. • Aerospace and Defense Used in lightweight, high-strength piping assemblies and fuel systems exposed to extreme environments. • Medical and Pharmaceutical Equipment Preferred for its biocompatibility and corrosion resistance in sterile and hygienic fluid handling systems. • High-Temperature and Reactive Environments Titanium Grade 5 flanges are used in systems exposed to thermal cycling, strong oxidizers, or aggressive chemical media. Key Features: • Manufactured in accordance with DIN 2576 standard • PN 10 pressure rating for moderate pressure systems • Exceptional resistance to corrosion, especially from seawater and chemicals • Available in Titanium Grade 2 and Grade 5 • Slip-on design for easy installation and accurate alignment • Flat face options compatible with specific gaskets and joint types • Lightweight yet mechanically strong • Suitable for marine, aerospace, medical, and chemical processing industries • Custom sizes, face types, and surface finishes available upon request Conclusion: DIN 2576 Titanium Flanges PN 10 from Ladhani Metal Corporation offer an ideal solution for industries requiring high corrosion resistance and durability in low to medium-pressure systems. With options in commercially pure and alloyed titanium, these flanges are engineered to meet the most demanding applications. For technical consultation, custom designs, or ordering information, contact Ladhani Metal Corporation today.

DIN 2573 Carbon Steel Flanges PN 6 are robust, low-pressure plate flanges manufactured from high-quality carbon steel, specifically developed for general-purpose applications in non-corrosive to mildly corrosive environments. These flanges are designed in accordance with the DIN 2573 standard and are widely used in industrial piping systems where moderate strength and affordability are key requirements. Their simple design and ease of installation make them suitable for low-pressure fluid transfer, air, steam, and water systems across various industries. Ladhani Metal Corporation is a reputable manufacturer and exporter of carbon steel flanges, offering products that adhere to strict international quality and dimensional standards. The DIN 2573 plate flange configuration provides a secure, gasket-sealed connection, ensuring reliable performance even in basic utility and mechanical piping systems. Pressure Rating: • PN 6 (6 bar / 87 psi): Suitable for low-pressure applications involving air, water, oil, and non-aggressive fluids in industrial or mechanical systems. Flange Types: • Plate Flanges Flat flanges designed for easy bolting and gasket sealing, offering a reliable connection in low-pressure systems. • Flat Face (FF) Flanges Ideal for systems using cast iron or non-metallic components, these flanges provide uniform gasket compression and reduce the risk of flange distortion. • Slip-On Flanges These flanges slide over the pipe and are welded on both sides, ensuring secure attachment and proper alignment in basic fluid and gas systems. • Custom-Machined Flanges Available in a variety of sizes and finishes, custom carbon steel flanges can be tailored to meet project-specific requirements. Carbon Steel Grades and Composition: Carbon Steel A105 (Forged) Composition: • Carbon (C): 0.35% max • Manganese (Mn): 0.60 – 1.05% • Phosphorus (P): 0.035% max • Sulfur (S): 0.040% max • Silicon (Si): 0.10 – 0.35% • Iron (Fe): Balance Applications: A105 carbon steel is commonly used for flanges in ambient and elevated temperature service, especially in oil and gas, water transmission, and mechanical systems. Its good machinability and weldability make it a cost-effective choice for general use. Carbon Steel ST37 / S235JR Composition: • Carbon (C): 0.17 – 0.20% • Manganese (Mn): ≤ 1.4% • Phosphorus (P) and Sulfur (S): ≤ 0.045% • Iron (Fe): Balance Applications: Used in structural piping, water distribution, fire protection systems, and low-pressure industrial piping. ST37/S235JR flanges offer reliable performance in applications where corrosion is minimal and pressure requirements are moderate. Applications of DIN 2573 Carbon Steel Flanges: • Water Distribution Systems: Used in water pipelines, treatment plants, and municipal systems where pressure ratings are low and material strength is sufficient. • HVAC and Utility Systems: Ideal for heating, ventilation, and cooling systems that operate under low pressure with non-corrosive fluids. • Oil and Gas (Low Pressure Segments): Applicable in low-pressure oil pipelines, tank farms, and non-critical utility lines. • General Industrial Piping: Widely used in manufacturing facilities for compressed air, inert gas lines, and general fluid handling. • Fire Protection Systems: Carbon steel flanges are commonly used in fire sprinkler systems and standpipe installations. Key Features: • Manufactured according to DIN 2573 specifications • PN 6 pressure rating for low-pressure fluid and utility applications • Excellent strength, machinability, and weldability • Cost-effective solution for non-aggressive environments • Available in A105, ST37, S235JR, and other carbon steel grades • Suitable for mechanical systems, utilities, and water transmission • Custom face finishes, drilling, and dimensions available Conclusion: DIN 2573 Carbon Steel Flanges PN 6 from Ladhani Metal Corporation offer a durable and economical choice for a wide range of low-pressure applications. Combining structural strength with manufacturing precision, these flanges are ideal for utility piping, water distribution, and general industrial use. For detailed technical support, custom dimensions, or pricing inquiries, contact Ladhani Metal Corporation today. 📞 Contact Ladhani Metal Corporation Website: https://www.ladhanimetal.in/ https://www.ladhanimetal.com/ Email: info@ladhanimetals.com Request a Quote: Custom dimensions, materials, and finishes available upon request

DIN 2573 Inconel Flanges PN 6 are precision-manufactured low-pressure plate flanges made from high-performance Inconel alloys, specifically engineered for highly corrosive and thermally challenging environments. Compliant with DIN 2573 standards, these flanges are ideally suited for low-pressure applications that demand exceptional resistance to oxidation, acids, and high-temperature stress. Inconel’s unique properties make these flanges suitable for aggressive processing systems in industries such as chemical manufacturing, petrochemicals, marine, power generation, and aerospace. Ladhani Metal Corporation is a recognized manufacturer and global supplier of Inconel alloy flanges, delivering premium-quality components built to international specifications. The DIN 2573 plate flange design ensures straightforward installation while providing excellent sealing reliability, especially in environments where conventional materials may degrade rapidly. Pressure Rating: • PN 6 (6 bar / 87 psi): Designed for low-pressure systems that operate under harsh chemical, thermal, or oxidative conditions, providing long-term durability and consistent performance. Flange Types: • Plate Flanges Flat-ring type flanges used in systems where welding and bolting are required, with gasket sealing for low-pressure flow lines. • Flat Face (FF) Flanges Used with flat gaskets and mating surfaces, especially in brittle or cast systems where full contact and load distribution are critical. • Slip-On Flanges Ease of installation and alignment with the pipe make these ideal for maintenance-friendly or modular low-pressure piping. • Custom-Machined Flanges Precision-machined to customer-defined sizes, Inconel grades, drilling standards, and flange face finishes. Inconel Grades and Composition: 1. Inconel 600 (UNS N06600) Composition: • Nickel (Ni): ≥ 72% • Chromium (Cr): 14.0 – 17.0% • Iron (Fe): 6.0 – 10.0% • Manganese (Mn), Silicon (Si), Carbon (C): Trace amounts Applications: Commonly used in heat exchangers, furnace components, and food processing equipment exposed to high temperatures and oxidizing chemicals. 2. Inconel 625 (UNS N06625) Composition: • Nickel (Ni): ≥ 58.0% • Chromium (Cr): 20.0 – 23.0% • Molybdenum (Mo): 8.0 – 10.0% • Niobium (Nb): 3.15 – 4.15% Applications: Ideal for seawater equipment, chemical processing plants, aerospace exhaust systems, and nuclear reactors due to excellent resistance to pitting, crevice corrosion, and stress corrosion cracking. 3. Inconel 718 (UNS N07718) Composition: • Nickel (Ni): 50.0 – 55.0% • Chromium (Cr): 17.0 – 21.0% • Iron (Fe): Balance • Molybdenum (Mo): 2.8 – 3.3% • Niobium (Nb): 4.75 – 5.5% • Titanium (Ti): 0.65 – 1.15% • Aluminum (Al): 0.2 – 0.8% Applications: Primarily used in aerospace, gas turbines, and cryogenic systems due to its exceptional high-temperature strength, oxidation resistance, and good weldability. It is ideal for use in extreme thermal environments, such as turbine engines and high-pressure systems. Applications of DIN 2573 Inconel Flanges: • Chemical and Acid Processing Plants: Withstand highly corrosive chemicals such as nitric, hydrochloric, and sulfuric acid under thermal cycling. • Power Generation and Heat Exchangers: Resist oxidation and high-temperature fatigue in boiler feed systems, turbine piping, and condensate lines. • Marine and Offshore Installations: Provide excellent resistance to seawater, salt spray, and chloride-induced stress corrosion cracking. • Aerospace and Jet Engine Systems: Used in fuel, exhaust, and cooling systems where heat and corrosion resistance are critical. • Environmental and Waste Treatment Facilities: Endure aggressive chemical waste, thermal gradients, and acidic sludges in scrubbing and exhaust ducting systems. Key Features: • Designed according to DIN 2573 standards • PN 6 rating for low-pressure service with high chemical and thermal loads • Outstanding resistance to acids, chlorides, oxidation, and high temperatures • Available in Inconel 600, 625, 718, and other high-nickel alloys • Low maintenance and long service life in corrosive environments • Machinable for customized face types and bolt hole configurations Conclusion: DIN 2573 Inconel Flanges PN 6 from Ladhani Metal Corporation are engineered for performance in chemically aggressive and thermally intense low-pressure systems. With superior corrosion and heat resistance, these flanges are a critical component in applications where traditional materials fail. For specific alloy recommendations, custom dimensions, or technical support, contact Ladhani Metal Corporation today.

DIN 2573 Stainless Steel Flanges PN 6 are precision-manufactured flat flanges made from high-grade stainless steel, designed for low-pressure applications across a broad range of industrial sectors. Compliant with DIN 2573 standards, these flanges provide excellent corrosion resistance, mechanical reliability, and compatibility with standard piping systems. They are commonly used in non-critical, low-pressure environments in industries such as water treatment, HVAC, food processing, and general utility piping systems. Ladhani Metal Corporation is a reputable manufacturer and exporter of stainless steel flanges, offering components that adhere to international quality benchmarks. The flat flange design simplifies assembly and disassembly, making these flanges a practical choice for systems requiring easy maintenance and reliable sealing at lower pressure ranges. Pressure Rating: • PN 6 (6 bar / 87 psi): Engineered for low-pressure systems where moderate sealing performance and corrosion resistance are essential. Flange Types: • Plate Flanges Used in low-pressure piping systems for simple bolted connections with gaskets. • Flat Face (FF) Flanges Ideal for use with cast iron equipment or non-metallic gaskets to ensure uniform surface contact. • Slip-On Flanges Designed for ease of installation by sliding over the pipe and welding both sides for moderate sealing. • Custom-Machined Flanges Available in specific dimensions and stainless steel grades as per customer specifications and operational requirements. Stainless Steel Grades and Composition: 1. 304 (Austenitic Stainless Steel) Composition: • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 11.0% Applications: Used in water supply lines, food-grade piping, and low-pressure process lines due to its hygienic properties and corrosion resistance. 2. 316 (Molybdenum-Alloyed Stainless Steel) Composition: • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% Applications: Suited for mildly corrosive environments including water filtration systems and food-grade tanks. 3. 321 (Titanium-Stabilized Stainless Steel) Composition: • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 17.0 – 19.0% • Nickel (Ni): 9.0 – 12.0% • Titanium (Ti): ≥ 5x(C+N) Applications: Applicable in moderately high temperatures or where intergranular corrosion resistance is important, such as thermal pipelines and heating systems. Applications of DIN 2573 Stainless Steel Flanges: • Water Distribution and Treatment Systems: Used in potable and waste water systems, ensuring non-reactive and rust-resistant performance. • HVAC and Building Installations: Employed in air ducts, chilled water lines, and other HVAC components where low-pressure performance is sufficient. • Food and Beverage Processing: Chosen for hygienic piping setups in non-pressurized fluid transfer applications. • Industrial Utility Lines: Integrated into auxiliary piping systems for lubricants, cooling water, and drainage. • Agricultural and Irrigation Systems: Used in low-pressure pumping and irrigation lines due to their corrosion resistance and ease of installation. Key Features: • Manufactured in compliance with DIN 2573 standard • PN 6 pressure rating suitable for non-critical systems • Excellent corrosion resistance with hygienic surface options • Flat and slip-on configurations for simplified assembly • Available in 304, 316, 321, and other stainless steel grades Conclusion: DIN 2573 Stainless Steel Flanges PN 6 by Ladhani Metal Corporation offer a cost-effective and reliable solution for low-pressure applications. Their corrosion-resistant material, ease of installation, and compliance with international standards make them ideal for various general-purpose industrial systems. For tailored configurations, specific material grades, or technical support, contact Ladhani Metal Corporation.

DIN 2568 Carbon Steel Flanges PN 64 are robust threaded flanges manufactured from high-strength carbon steel, specifically designed to deliver reliable performance in high-pressure industrial systems. Produced in accordance with DIN 2568 specifications, these flanges offer excellent mechanical strength, thermal conductivity, and impact resistance, making them well-suited for demanding applications in oil and gas, petrochemicals, water treatment, mechanical construction, and power generation. Ladhani Metal Corporation is a trusted manufacturer and exporter of carbon steel flanges, offering products that comply with international quality standards and dimensional tolerances. The threaded design enables quick, weld-free installation and removal, making these flanges ideal for systems requiring ease of maintenance and rapid assembly. Pressure Rating: • PN 64 (64 bar / 928 psi): Engineered to withstand high-pressure environments and thermal variations in critical industrial applications. Flange Types: • Threaded (Screwed) Flanges Enable efficient installation without welding, ideal for systems requiring regular inspection or maintenance. • Raised Face (RF) Flanges Improve gasket sealing by concentrating pressure at the gasket area, ideal for high-pressure applications. • Flat Face (FF) Flanges Used in systems involving flat mating surfaces, particularly with brittle or non-metallic equipment. • Forged Threaded Flanges Provide excellent mechanical properties, dimensional accuracy, and durability under load. • Custom-Machined Flanges Available in various sizes, sealing surfaces, and material grades as per customer requirements. Available Carbon Steel Grades and Composition: 1. ASTM A105 (Forged Carbon Steel) Composition: • Carbon (C): ≤ 0.35% • Manganese (Mn): 0.60 – 1.05% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.040% • Silicon (Si): 0.10 – 0.35% Applications: Widely used in valve, pipe, and fitting assemblies in oil and gas, power, and chemical systems due to its strength, toughness, and weldability. 2. ASTM A350 LF2 (Low-Temperature Carbon Steel) Composition: • Carbon (C): ≤ 0.30% • Manganese (Mn): 0.60 – 1.35% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.040% • Silicon (Si): 0.15 – 0.30% Applications: Ideal for cryogenic and low-temperature pressure systems such as pipelines, storage tanks, and vessel components operating in sub-zero climates. Applications of DIN 2568 Carbon Steel Flanges: • Oil and Gas Industry Utilized in upstream and downstream operations, including high-pressure pipelines, wellheads, and separators. • Power Plants Used in steam, cooling water, and high-pressure boiler systems. • Water and Wastewater Management Suitable for potable water lines, sewage treatment facilities, and utility piping systems. • Petrochemical and Refining Applied in process piping that handles non-aggressive or mildly corrosive fluids. • Mechanical and Structural Installations Common in HVAC systems, pressure vessels, and general mechanical piping networks. Key Features: • Manufactured as per DIN 2568 standard • Rated for PN 64 high-pressure applications • Excellent strength, impact resistance, and thermal conductivity • Threaded connection ensures quick and easy, weld-free assembly • Cost-effective and durable solution for industrial infrastructure • Supplied with test certificates, inspection reports, and full traceability • Compatible with galvanizing, coating, or welding processes as required Conclusion: DIN 2568 Carbon Steel Flanges PN 64 from Ladhani Metal Corporation are engineered for high performance in critical industrial environments. Offering high pressure resistance, mechanical durability, and easy installation, these flanges are an optimal solution for a wide range of piping systems. For custom sizes, material options, or technical consultation, contact Ladhani Metal Corporation today.

DIN 2568 Monel Flanges PN 64 are high-integrity threaded flanges manufactured from corrosion-resistant Monel alloys, designed to perform reliably under high pressure and in highly corrosive environments. Built in accordance with DIN 2568 standards, these flanges offer outstanding resistance to seawater, acids, and alkalis, while maintaining high mechanical strength and thermal stability. They are ideally suited for use in marine, chemical, oil and gas, and offshore applications where both durability and corrosion performance are critical. Ladhani Metal Corporation is a recognized manufacturer and exporter of Monel flanges, offering components that conform to global industry specifications. The threaded design facilitates easy, weld-free installation and disassembly, making them ideal for systems requiring frequent maintenance or rapid assembly in corrosive environments. Pressure Rating: • PN 64 (64 bar / 928 psi): Specially engineered for high-pressure systems exposed to aggressive chemical environments, ensuring mechanical integrity and long service life. Flange Types: • Threaded (Screwed) Flanges Enable efficient, non-welded installation and maintenance in high-corrosion environments. • Raised Face (RF) Flanges Improve gasket sealing performance in systems with pressure and temperature variations. • Flat Face (FF) Flanges Suited for connections with flat-faced components, ensuring uniform gasket load distribution. • Forged Threaded Flanges Provide enhanced strength, dimensional precision, and resistance to corrosion. • Custom-Machined Flanges Available in a variety of sizes, pressure ratings, and Monel grades to suit specific application needs. Available Monel Grades and Composition: 1. Monel 400 (UNS N04400) Composition: • Nickel (Ni): ≥ 63.0% • Copper (Cu): 28.0 – 34.0% • Iron (Fe): 2.0 – 2.5% • Manganese (Mn): ≤ 2.0% Applications: Commonly used in marine engineering, chemical processing, and hydrocarbon systems for its excellent resistance to saltwater, hydrofluoric acid, and stress corrosion cracking. 2. Monel K500 (UNS N05500) Composition: • Nickel (Ni): ≥ 63.0% • Copper (Cu): 27.0 – 33.0% • Aluminum (Al): 2.3 – 3.15% • Titanium (Ti): 0.35 – 0.85% Applications: Ideal for high-strength applications such as pump shafts, marine fasteners, and heat exchangers, combining the corrosion resistance of Monel 400 with increased hardness and tensile strength. Applications of DIN 2568 Monel Flanges: • Marine and Offshore Systems Used in seawater piping, ballast systems, and marine heat exchangers. • Chemical and Petrochemical Plants Resistant to acidic and alkaline media in processing plants and reactors. • Oil and Gas Industry Applied in sour gas service, separators, and wellhead systems. • Power Generation Installed in condensers, boilers, and cooling systems exposed to aggressive fluids. • Aerospace and Heat Treatment Suitable for exhaust systems, fixtures, and salt bath environments. Key Features: • Conforms to DIN 2568 standard • Rated for PN 64 high-pressure service • Exceptional resistance to seawater, acids, and alkalis • High strength, ductility, and fatigue resistance • Threaded design allows for fast, weld-free installation and disassembly • Supplied with test certificates, material traceability, and quality documentation • Available with custom machining, finishing, and dimensional options Conclusion: DIN 2568 Monel Flanges PN 64 from Ladhani Metal Corporation offer an optimal solution for high-pressure systems operating in chemically aggressive or marine environments. With superior mechanical performance and corrosion resistance, Monel 400 and K500 flanges provide long-lasting service life in demanding applications. For technical support, grade selection, or custom orders, contact Ladhani Metal Corporation today