Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are robust, precision-fabricated protective sleeves designed to guard the outer surfaces of tubes in boilers, heat exchangers, incinerators, and high-temperature processing equipment. Engineered to extend the service life of tubes exposed to corrosive gases, abrasive particulates, and elevated temperatures, these shields provide a reliable barrier against mechanical and chemical degradation. The half-round design facilitates easy installation while ensuring a secure, form-fitting layer of defense. 1Cr13 Half Round Tube Shield The 1Cr13 Half Round Tube Shield is a semi-cylindrical component manufactured from martensitic stainless steel containing approximately 13% chromium. Classified under the 1Cr13 grade, this alloy delivers good corrosion resistance, excellent wear performance, and moderate strength at elevated temperatures. It is especially suited for thermal environments that are not extremely oxidizing or carburizing but where erosion and mechanical wear are a concern. With a higher hardness potential through heat treatment and moderate thermal resistance, 1Cr13 shields are ideal for applications involving flue gas exposure, soot-laden atmospheres, and temperature cycling. The shield’s half-round configuration is precision-engineered for optimal tube coverage and long-term durability. It offers a balance of strength, corrosion resistance, and cost-effectiveness, making it suitable for a wide range of industrial processes. Chemical Composition of 1Cr13 – Martensitic Stainless Steel • Carbon (C): 0.15 – 0.20% • Silicon (Si): ≤ 1.00% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Chromium (Cr): 12.0 – 14.0% • Nickel (Ni): ≤ 0.60% • Iron (Fe): Balance Uses • Boiler Tube Protection – Shields tube surfaces from flue gas erosion, ash particle abrasion, and soot buildup in economizers and waterwalls. • Heat Exchanger Tubes – Provides an extra layer of wear resistance in zones prone to mechanical stress and fluid turbulence. • Incinerator and Waste Heat Units – Guards tubes exposed to fluctuating temperatures, slag, and particulate deposits. • Cement Plant Piping – Protects tubing and ducts in kiln exhaust systems from abrasive dust and high flow velocity. • Air Preheaters and Recuperators – Enhances the durability of components subjected to temperature variations and corrosive gases. Features • Moderate Oxidation Resistance – Chromium content enables good performance in mildly oxidizing environments and intermittent exposure to high temperatures. • Wear and Abrasion Resistance – Martensitic structure offers high surface hardness and resistance to mechanical wear. • Heat Treatable – Can be hardened to increase durability and resistance to deformation. • Cost-Effective – Provides a lower-cost alternative to austenitic and superalloy shields for moderate service conditions. • High Dimensional Accuracy – Manufactured with tight tolerances to ensure secure fitment and uniform tube coverage. • Convenient Installation – Half-round shape enables quick mounting through welding or clamping techniques. • Versatile Finishing Options – Supplied with pickled or mechanically polished surfaces to improve corrosion resistance and adhesion. Applications • Power Generation – Used in economizer, preheater, and convection sections of boilers to prevent erosion and fouling. • Chemical and Fertilizer Plants – Protects exposed tube surfaces in systems with moderate chemical exposure. • Metallurgical Furnaces – Shields mechanical and flue components exposed to particulate movement and temperature cycling. • Pulp and Paper Industry – Used in recovery boilers and heat exchangers where corrosion resistance and mechanical strength are both required. • Petrochemical Plants – Applied in lower-temperature zones where scaling and erosion are primary concerns. Conclusion The 1Cr13 Half Round Tube Shield by Ladhani Metal Corporation provides an optimal solution for industrial tube protection in moderate temperature and corrosion environments. Its martensitic stainless steel composition ensures excellent wear resistance, good oxidation stability, and structural strength at a competitive cost. Designed for easy installation and reliable performance, these shields are ideal for various applications in power, process, and heat recovery systems. Custom-built to meet specific dimensions, material thicknesses, and finishing preferences, 1Cr13 tube shields offer dependable service life extension for critical heat transfer equipment. For technical specifications, pricing, or customization inquiries, please contact Ladhani Metal Corporation.

DIN 2627 Carbon Steel flanges PN 400 are high-strength blind flanges designed for use in high-pressure applications across a wide range of industrial systems. Manufactured in accordance with the DIN 2627 standard, these flanges are primarily used to isolate piping systems by sealing off the end of a pipeline or vessel opening. The PN 400 pressure rating (400 bar / 5800 psi) ensures reliable performance under intense pressure and mechanical stress. Carbon steel flanges offer excellent tensile strength, impact resistance, and structural integrity, making them a cost-effective solution for systems where corrosion resistance is not the primary concern. Typically used in applications involving water, steam, oil, and gas, DIN 2627 carbon steel blind flanges are well-suited for power plants, refineries, petrochemical facilities, and general industrial systems. Ladhani Metal Corporation is a trusted global manufacturer and exporter of carbon steel flanges, producing components that meet rigorous international standards for material quality, dimensional accuracy, and pressure containment. Pressure Rating: • PN 400 (400 bar / 5800 psi): Suitable for extremely high-pressure systems in industrial pipelines and mechanical installations. Flange Type: • Blind Flanges Solid, non-bored flanges used to terminate flow or provide system isolation. Commonly used for pressure testing, maintenance access, and future expansion. • Flat Face (FF) Flanges Flat sealing surfaces designed for use with full-face gaskets and flat-faced mating flanges. Promotes even bolt loading and effective sealing under high-pressure conditions. Carbon Steel Grades and Composition: ASTM A105 (Forged Carbon Steel) • Carbon (C): ≤ 0.35% • Manganese (Mn): 0.60 – 1.05% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.040% • Silicon (Si): 0.10 – 0.35% Applications: Commonly used for high-temperature and high-pressure systems. Ideal for oil and gas, steam, and hydraulic systems. ASTM A350 LF2 (Low-Temperature Carbon Steel) • Carbon (C): ≤ 0.30% • Manganese (Mn): 0.60 – 1.35% • Silicon (Si): 0.15 – 0.30% • Nickel (Ni): ≤ 1.0% Applications: Suitable for sub-zero temperature services such as cryogenic systems, LNG processing, and cold-weather pipelines. Applications of DIN 2627 Carbon Steel Flanges PN 400: • Oil and Gas Transmission Lines Used in pipeline systems and refineries handling hydrocarbons under high pressure. • Steam and Power Generation Plants Ideal for high-pressure steam lines, condensate systems, and boiler feedwater applications. • Petrochemical and Chemical Industries Suitable for handling neutral and non-aggressive chemical fluids and process gases. • Water Treatment and Pumping Stations Used in high-pressure water systems, including pumping stations, pressure regulators, and testing units. • Heating, Ventilation, and Air Conditioning (HVAC) Employed in high-pressure chilled water and steam systems for industrial facilities. • General Manufacturing and Engineering Systems Reliable for structural piping systems in factories and mechanical installations. Key Features: • Compliant with DIN 2627 specifications • PN 400 pressure rating for ultra-high-pressure systems • Blind flange design allows for system isolation and pressure containment • Flat face design compatible with full-face gaskets and flat mating surfaces • Manufactured from forged carbon steels like ASTM A105 and A350 LF2 • Excellent strength, ductility, and impact resistance • Economical and durable for non-corrosive environments • Widely used across oil and gas, power, chemical, and water treatment sectors • Custom sizes, pressure classes, surface coatings, and face types available upon request Conclusion: DIN 2627 Carbon Steel Flanges PN 400 from Ladhani Metal Corporation are engineered for high-performance applications requiring strength, pressure retention, and reliability in demanding industrial environments. Whether used in power plants, oil pipelines, or steam systems, these flanges provide durable and cost-effective sealing for critical operations. Contact Ladhani Metal Corporation for product specifications, technical support, or custom solutions tailored to your piping system requirements.

DIN 2627 Monel flanges PN 400 are high-performance blind flanges crafted for ultra-high-pressure systems where superior corrosion resistance, durability, and structural integrity are critical. Compliant with the DIN 2627 standard, these flanges are specifically designed to close off the ends of pipelines in extreme service environments, including highly corrosive marine atmospheres, acidic and alkaline chemical processes, and high-temperature applications. With a PN 400 rating (400 bar / 5800 psi), these flanges ensure leak-free operation under intense pressure and challenging conditions. Made from Monel alloys—primarily Monel 400 and Monel K500—these flanges are widely utilized in offshore oil rigs, naval applications, chemical processing, and power generation systems. Ladhani Metal Corporation is a global leader in manufacturing and exporting DIN-standard Monel flanges, ensuring compliance with international requirements for pressure containment, corrosion resistance, and metallurgical consistency. Pressure Rating: • PN 400 (400 bar / 5800 psi): Engineered for extremely high-pressure piping systems in critical and hazardous service environments where reliable sealing is essential. Flange Type: • Blind Flanges Solid, non-bored flanges used to seal piping systems or terminate flow paths. Ideal for pressure testing, system isolation, and future expansion. • Flat Face (FF) Flanges Designed with a flat sealing surface for use with full-face gaskets and flat mating components. Ensures uniform load distribution and optimal sealing performance. Monel Grades and Composition: Monel 400 (UNS N04400) • Nickel (Ni): ≥ 63% • Copper (Cu): 28 – 34% • Iron (Fe): ≤ 2.5% • Manganese (Mn): ≤ 2% • Silicon (Si): ≤ 0.5% • Carbon (C): ≤ 0.3% Applications: Outstanding resistance to seawater, hydrofluoric acid, alkalis, and other corrosive media. Widely used in marine equipment, chemical processing, and heat exchangers. Monel K500 (UNS N05500) • Nickel (Ni): ≥ 63% • Copper (Cu): 27 – 33% • Aluminum (Al): 2.3 – 3.15% • Titanium (Ti): 0.35 – 0.85% • Iron (Fe): ≤ 2% • Carbon (C): ≤ 0.25% Applications: Combines the corrosion resistance of Monel 400 with enhanced strength and hardness. Suitable for high-stress components like shafts, valve parts, and pump systems in corrosive environments. Applications of DIN 2627 Monel Flanges PN 400: • Offshore Oil and Gas Platforms Ideal for subsea systems exposed to high salinity, pressure, and corrosive gases such as hydrogen sulfide. • Marine and Shipbuilding Preferred in piping systems, ballast lines, and propulsion equipment exposed to seawater and biofouling agents. • Chemical and Petrochemical Plants Used in process systems handling caustic solutions, hydrofluoric acid, and strong alkalis at elevated pressures. • Heat Exchangers and Condensers Excellent thermal conductivity and corrosion resistance make Monel suitable for harsh thermal cycling conditions. • Nuclear and Power Generation Resilient in high-radiation and chemical-laden environments found in cooling systems and high-pressure steam lines. • Aerospace and Defense Used in fuel and hydraulic lines where strength and resistance to high-pressure corrosive media are critical. Key Features: • Manufactured according to DIN 2627 standards • Rated for PN 400 high-pressure operations • Blind flange design ensures reliable sealing and flow isolation • Flat face configuration for full-face gasket compatibility • Available in Monel 400 and Monel K500 grades • Exceptional resistance to corrosion by seawater, acids, and alkalis • High strength and durability in extreme service environments • Widely used in marine, chemical, nuclear, oil and gas, and aerospace industries • Custom configurations, sizes, and material options available on request Conclusion: DIN 2627 Monel Flanges PN 400 from Ladhani Metal Corporation are engineered for mission-critical applications where long-term durability, corrosion resistance, and high-pressure performance are mandatory. Whether you need protection against seawater, alkalis, or aggressive process chemicals, these flanges provide robust, leak-free service in the harshest operating environments. Contact Ladhani Metal Corporation for expert guidance, custom engineering, and dependable supply of Monel flange solutions tailored to your specific needs

Ladhani Metal Corporation is a trusted manufacturer and exporter of DIN 2565 super duplex flanges, engineered for high-performance, corrosion-resistant, and high-strength piping connections in low-pressure systems. Manufactured according to DIN 2565 standards and available with a PN 6 pressure rating, these flanges are ideal for threaded piping systems where welding is not required. Made from super duplex stainless steel, these flanges offer a balanced microstructure of austenite and ferrite, delivering superior mechanical strength along with excellent resistance to stress corrosion cracking, pitting, and crevice corrosion. They are widely used in critical environments that demand both durability and longevity. Flange Types: • Threaded (Screwed) Flanges: Enable easy assembly and disassembly without welding; ideal for systems with frequent maintenance needs. • Raised Face (RF) Flanges: Enhances gasket compression for improved leak prevention under low-pressure conditions. • Flat Face (FF) Flanges: Preferred in systems with non-metallic gaskets and where mating with cast iron components is common. • Forged Threaded Flanges: Forged construction provides superior mechanical properties and structural integrity. • Custom-Machined Flanges: Available in special dimensions and configurations to meet project-specific requirements. Super Duplex Steel Grade and Chemical Composition: Super Duplex 2507 (UNS S32750) Chromium (Cr): 24.0 – 26.0% Nickel (Ni): 6.0 – 8.0% Molybdenum (Mo): 3.0 – 5.0% Nitrogen (N): 0.24 – 0.32% Iron (Fe): Balance Applications: Designed for use in extremely corrosive conditions including offshore oil rigs, chemical processing plants, and desalination systems. Offers outstanding resistance to chloride-induced corrosion and exceptional mechanical strength. Applications of DIN 2565 Super Duplex Flanges: • Offshore Oil & Gas Platforms: High corrosion resistance against seawater and chloride stress. • Desalination and Water Treatment: Superior performance in brine and high-salinity environments. • Chemical and Petrochemical Plants: Suitable for aggressive chemicals and high-pressure systems. • Power Generation: Used in condensers, cooling systems, and high-pressure steam systems. • Marine Engineering: Ideal for underwater and shipboard piping systems. Key Features: • Manufactured to DIN 2565 specifications with PN 6 pressure rating • Exceptional strength and corrosion resistance in chloride-rich and acidic environments • Excellent resistance to stress corrosion cracking, pitting, and crevice corrosion • Non-magnetic and highly durable in extreme conditions • Available with full traceability, test reports, and third-party inspection certificates Conclusion: DIN 2565 super duplex flanges from Ladhani Metal Corporation provide a reliable, high-strength solution for critical applications in corrosive and demanding environments. Combining advanced metallurgical properties with precision manufacturing, these flanges are the ideal choice for industries where performance, durability, and safety are non-negotiable. For more information, technical support, pricing, or to place a bulk order, contact Ladhani Metal Corporation today.

DIN 2545 Inconel flanges are engineered for superior strength, excellent resistance to high temperatures, and remarkable corrosion resistance in extreme environments. Ladhani Metal Corporation provides these high-quality flanges made from Inconel alloys, known for their ability to endure elevated temperatures, oxidation, and corrosive conditions. These flanges are ideal for industries where performance under high-temperature stress and resistance to harsh environments are essential, such as aerospace, chemical processing, power generation, and marine. Types of DIN 2545 Inconel Flanges: Flat Face Flanges (FF) – These flanges have a flat surface that facilitates uniform distribution of the sealing force, making them ideal for low-pressure systems or when a secure seal is required. Raised Face Flanges (RF) – Raised face flanges feature a raised area around the bolt holes, providing enhanced sealing pressure, making them suitable for high-pressure environments. Ring-Type Joint (RTJ) Flanges – Designed with a groove for a metal sealing ring, these flanges are ideal for applications requiring resistance to high pressure and high temperatures. Grades and Chemical Composition: Inconel 600 (UNS N06600) Chemical Composition: Ni: 72%, Cr: 14-17%, Fe: balance, Mn: 1%, Si: 0.5%, C: 0.15% Inconel 600 is known for its excellent resistance to oxidation and corrosion at elevated temperatures. It is widely used in applications like furnace components, chemical processing, and nuclear reactors, offering high strength and good workability. Inconel 625 (UNS N06625) Chemical Composition: Ni: 58%, Cr: 20-23%, Mo: 8-10%, Fe: 5%, Nb: 3.15-4.15%, Ti: 0.4-1% Inconel 625 is a nickel-based alloy that offers superior resistance to high-temperature oxidation and corrosion. It provides exceptional resistance to pitting and crevice corrosion, making it ideal for applications in aerospace, marine, and chemical industries, where high temperatures and corrosive environments are common. Inconel 718 (UNS N07718) Chemical Composition: Ni: 50-55%, Cr: 17-21%, Fe: 0-5%, Mo: 2.8-3.3%, Nb+Ta: 4.75-5.5%, Ti: 0.65-1.15%, Al: 0.2-0.8% Inconel 718 is a high-strength, corrosion-resistant alloy widely used in high-temperature applications. It is designed for use in extreme conditions, offering excellent resistance to oxidation, sulfidation, and high-temperature environments. PN 40 Pressure Rating: The "PN" rating indicates the flange's pressure capacity. PN 40 refers to flanges that are designed to withstand pressures up to 40 bar, making them suitable for high-pressure systems where secure, leak-free connections are essential. Applications: Aerospace Industry: Jet Engines and Turbomachinery: Inconel flanges are commonly used in aerospace applications, including jet engines and turbine systems, where components are exposed to extremely high temperatures and pressures. They provide excellent resistance to heat and corrosion in high-stress environments. Exhaust Systems: Inconel's ability to withstand high temperatures makes it ideal for use in exhaust systems of aircraft engines. 2. Power Generation Industry: Gas Turbines: Inconel flanges are used in gas turbines in power plants, particularly in components that operate at high temperatures, such as turbine blades, combustors, and other critical parts. Nuclear Power Plants: Inconel is used in the construction of components for nuclear reactors, where heat and radiation resistance are crucial. It is used in piping, valves, and other systems exposed to high-temperature nuclear environments. 3. Chemical Processing and Petrochemical Industries: High-Temperature Reactors: Inconel flanges are used in reactors, heat exchangers, and other equipment in the chemical industry that handle aggressive, high-temperature chemical reactions, including those with sulfuric acid, chlorine, and other corrosive substances. Petrochemical Refineries: Inconel is used in systems where high temperatures and reactive chemicals are present, offering superior performance in handling corrosive materials such as acids and hydrocarbons. 4. Oil and Gas Industry: Offshore Platforms: Inconel flanges are widely used in offshore oil and gas platforms, particularly in subsea pipelines, risers, and pressure vessels, where high resistance to both high pressure and corrosion (especially from seawater) is necessary. Wellhead Equipment: Inconel flanges are also used in downhole equipment and wellhead connections that need to resist high-pressure environments and exposure to extreme temperatures. Ladhani Metal Corporation ensures that each Inconel flange is produced to the highest standards of quality and precision, adhering to international specifications. Every flange undergoes thorough testing to meet the required durability and performance standards, providing reliable solutions for critical applications in the most challenging environments. #din2545 #din2545flanges #din2545inconelflanges #flanges #flangessupplier

DIN 2544 Inconel flanges are flanges manufactured according to the DIN 2544 standard, specifically designed for use with Inconel alloys. Inconel is a family of high-performance nickel-chromium-based superalloys that are known for their exceptional strength and resistance to high temperatures and corrosion. These flanges are primarily used in industries that involve extreme conditions such as aerospace, chemical processing, and high-temperature applications. Ladhani Metal Corporation is a prominent supplier and distributor of high-quality industrial products, including DIN 2544 Inconel flanges. The company specializes in offering a wide range of flanges, fittings, and pipes made from high-performance materials such as Inconel, duplex stainless steel, and other super alloys. Key Features: Material: Inconel alloys (typically Inconel 600, 625, or 718). Pressure Rating (PN 25): These flanges are rated for pressure class PN 25, meaning they can handle pressures up to 25 bar (2500 kPa). High Temperature Resistance: Inconel alloys are well-suited for high-temperature environments, maintaining strength and stability even at temperatures above 1000°C (1832°F). Corrosion Resistance: Inconel offers superior resistance to oxidation, corrosion, and carburization, particularly in high-temperature environments, making them ideal for harsh industrial conditions. Strength: Known for excellent mechanical properties, Inconel alloys retain high tensile and creep-rupture strength even under extreme temperatures. Types of DIN 2544 Inconel Flanges: Weld Neck Flange (WN): Used for high-pressure and high-temperature applications, where a strong, leak-proof joint is essential. Slip-On Flange (SO): Easy to install, these flanges slide over the pipe and are welded both inside and outside. Blind Flange (BL): Used to seal the ends of pipes, vessels, or openings. Threaded Flange (TH): These are screwed onto the pipe without welding, making them easier to remove. Socket Weld Flange (SW): Designed for smaller pipe sizes, where the pipe is inserted into the socket and welded in place. Grades of Inconel: Inconel 600: Contains 72% nickel, 14-17% chromium, and 6-10% iron. It offers excellent resistance to oxidation and carburization at high temperatures, making it ideal for applications in furnace components, heat exchangers, and chemical processing. Inconel 625: A nickel-chromium alloy with added molybdenum and niobium for increased strength and corrosion resistance in marine and chemical environments. It is highly resistant to both oxidation and carburization. Inconel 718: A precipitation-hardenable superalloy with high yield, tensile, and creep-rupture properties at temperatures up to 700°C (1292°F). It is widely used in aerospace, gas turbines, and high-performance engines. Pressure Rating (PN 25): PN 25 means the flange is rated for pressure up to 25 bar (2500 kPa), making it suitable for moderate to high-pressure applications. Summary: DIN 2544 Inconel flanges are robust, high-performance components made from Inconel alloys, designed for use in extremely high-temperature and corrosive environments. They come in various types, These flanges offer excellent resistance to oxidation, corrosion, and high temperatures, making them ideal for demanding applications in aerospace, chemical processing, and high-temperature industries. PN 25 flanges are rated for pressures up to 25 bar.

A DIN 2527 AISI 8630 blind flange is a specialized type of blind flange made from AISI 8630 alloy steel, designed according to the DIN 2527 German standard. Blind flanges are essential components in industrial piping systems, used to seal the end of a pipe, vessel, or valve to isolate it or prevent the flow of fluids. The AISI 8630 material used for this specific flange provides excellent strength, toughness, and wear resistance, making it ideal for applications in high-stress environments. Material: AISI 8630 Alloy Steel AISI 8630 is a low-alloy steel, enriched with nickel, chromium, and molybdenum for enhanced mechanical properties. It is known for its strength, toughness, and resistance to wear, making it suitable for heavy-duty applications, particularly in industries where components are subjected to high stress and pressure. Composition of AISI 8630: Carbon (C): 0.30% – 0.35% Provides strength and hardness. Chromium (Cr): 0.80% – 1.10% Improves hardness, wear resistance, and high-temperature strength. Molybdenum (Mo): 0.15% – 0.25% Enhances hardenability and resistance to wear. Nickel (Ni): 0.80% – 1.20% Adds toughness, especially at lower temperatures. Other elements: Small amounts of manganese (Mn), silicon (Si), and phosphorus (P), which improve the overall material quality and processing properties. Design and Dimensions (DIN 2527) Shape: The blind flange is a flat, circular plate with no central hole, designed to seal the open end of a pipe, valve, or vessel. Bolt Holes: The flange features evenly spaced bolt holes around the perimeter, which allow it to be securely attached to a matching flange or component. These holes align with the bolt pattern of the corresponding system components. Thickness: The thickness of the flange varies depending on the size and pressure rating, ensuring it can withstand internal pressure and provide a reliable seal. Pressure Rating: Pressure ratings are typically defined using classes such as PN 6, PN 10, PN 16, PN 25, etc., which represent the maximum pressure the flange can safely withstand without failure. Applications of DIN 2527 AISI 8630 Blind Flange Pipeline Sealing: The primary function of the blind flange is to seal the end of a pipeline, effectively preventing the passage of fluids, gases, or other materials. System Isolation: It is used to isolate sections of the pipeline for maintenance or repairs, allowing safe disconnection without compromising the integrity of the system. Pressure Containment: The high strength and durability of AISI 8630 make it suitable for applications where maintaining pressure within the system is critical, ensuring the flange can handle high-pressure environments. Types of Blind Flanges in DIN 2527 Blind flanges conforming to DIN 2527 can be found in different face types and sealing methods, including: Raised Face (RF): The flange surface has a slight raised area around the bolt circle, improving the seal when mated with a gasket. Flat Face (FF): The surface is level with the flange body and typically used with softer gaskets to create a seal. Ring Type Joint (RTJ): This type has a groove to accommodate a metal ring gasket, providing a secure seal in high-pressure applications. Conclusion A DIN 2527 AISI 8630 blind flange is a high-strength, durable sealing component designed for high-pressure and high-stress environments. Made from AISI 8630 alloy steel, it offers excellent mechanical properties such as strength, toughness, and wear resistance, making it ideal for use in industrial systems that require reliable seals under heavy loads and elevated temperatures.

Ladhani Metal Corporation manufactures, supplies, and exports Boiler Tube Erosion Shields and Bends designed to safeguard boiler tubes from severe erosion, abrasion, oxidation, and soot blower damage. Installed mainly on tube bends and high-impact zones, these shields act as sacrificial protective covers that extend tube service life, minimize maintenance costs, and improve operational reliability in power plants, WHRBs, HRSGs, and industrial boilers. Function of Boiler Tube Erosion Shield / Bend • Protects boiler tubes against erosion caused by high-velocity flue gases and abrasive fly ash particles • Shields critical bends and exposed sections from soot blower jet damage • Provides resistance to high-temperature oxidation and corrosion in aggressive boiler environments • Ensures longer service life of boiler components under extreme pressure and temperature conditions Available Grades Stainless Steel Grades: • SS 304 / SS 304L • SS 310 / SS 310S • SS 316 / SS 316L • SS 410 / SS 420 / SS 430 Special Alloy Grades: • 1Cr18Ni9Ti • Cr25Ni20 • 1Cr25Ni20Si2 • Cr23Ni13 • 1Cr20Ni14Si2 • 1Cr13 Applications • Power generation boilers – protection of reheater, superheater, and economizer tube sections • Waste Heat Recovery Boilers (WHRBs) – shielding tubes in high-erosion zones • Heat Recovery Steam Generators (HRSGs) – erosion and oxidation control in tube bends • Petrochemical and process heaters – protection against thermal cycling and erosive particles • Industrial steam plants – ensuring durability in corrosive and abrasive service Features • Excellent resistance to erosion and corrosion at high temperatures • Effective protection from soot blower jet impingement and flue gas particle flow • Manufactured with precision for an accurate fit on bends and exposed tube areas • Available in stainless steel and special alloy grades for diverse service conditions • Export-ready in multiple sizes, diameters, and bend profiles Conclusion Boiler Tube Erosion Shields and Bends from Ladhani Metal Corporation are engineered for superior performance in high-temperature, erosive environments. With a complete range of stainless steel and special alloy grades, these shields provide long-lasting tube protection, reduce maintenance downtime, and enhance boiler efficiency for both domestic and global clients. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #HalfRoundReheaterShield #ReheaterTubeShield #BoilerReheaterProtection #PowerPlantTubeShield #BoilerErosionShield #SteamBoilerTubeShield #HighTempTubeShield #BoilerWearProtection

Ladhani Metal Corporation manufactures, supplies, and exports Boiler Tube Protection Shields and Bends in Stainless Steel and Special Alloy grades. These shields are engineered to protect boiler tubes, especially at bends and high-impact zones, from erosion, corrosion, oxidation, and soot blower damage. Designed as a sacrificial barrier, they extend tube life, minimize maintenance downtime, and ensure reliable performance in power plants, industrial boilers, WHRBs, and HRSGs. Function of Boiler Tube Protection Shield / Bend • Shields boiler tubes at bends and exposed areas against high-velocity flue gas erosion • Reduces damage from abrasive fly ash and soot blower jets • Provides resistance to high-temperature oxidation and corrosion • Extends service life of boiler components under extreme thermal and mechanical stress Available Grades Stainless Steel Grades: • SS 304 / SS 304L • SS 310 / SS 310S • SS 316 / SS 316L • SS 410 / SS 420 / SS 430 Special Alloy Grades: • 1Cr18Ni9Ti • Cr25Ni20 • 1Cr25Ni20Si2 • Cr23Ni13 • 1Cr20Ni14Si2 • 1Cr13 Applications • Power generation boilers – reheater, superheater, and economizer tube protection • Waste Heat Recovery Boilers (WHRBs) – erosion and oxidation resistance in flue gas zones • Heat Recovery Steam Generators (HRSGs) – shielding of critical bends and exposed sections • Petrochemical and process heaters – protection under aggressive thermal cycling • Industrial steam plants – durability in corrosive and erosive service Features • High corrosion and oxidation resistance at elevated temperatures • Effective barrier against erosive flue gas streams and ash particles • Precision-engineered design ensures accurate fit on tube bends • Manufactured in stainless steels and special alloys for diverse service conditions • Export-ready in a wide range of sizes, thicknesses, and bend profiles Conclusion Boiler Tube Protection Shields and Bends from Ladhani Metal Corporation are available in a comprehensive range of stainless steel and special alloy grades to suit demanding operating environments. Offering superior erosion and corrosion resistance, these shields ensure long-term boiler efficiency, reduced downtime, and extended tube life in both domestic and international markets. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #HalfRoundReheaterShield #ReheaterTubeShield #BoilerReheaterProtection #PowerPlantTubeShield #BoilerErosionShield #SteamBoilerTubeShield #HighTempTubeShield #BoilerWearProtection#BoilerTubeProtection #BoilerTubeShield #BoilerBendShield #HalfRoundTubeShield #BoilerTubeWearProtection #PowerPlantTubeShield #BoilerTubeErosionShield #BoilerTubeProtectionShield #BoilerTubeSafety #BoilerTubeBendShield #IndustrialBoilerShield #SteamBoilerTubeProtection #HeatExchangerTubeShield #BoilerTubeGuard #BoilerTubeShielding