Aka CAS No. 13463-67-7, Titanium (VI) oxide, Titania, Rutile, Anatase, Brookite Titanium Dioxide Chemical Titanium Dioxide, also referred to Titania, has a molecular formula of Ti02 and this mineral compound – a white colored, odorless solid – is available in three different forms. Rutile titanium dioxide is the most common naturally occurring form followed by the anatase form but titanium dioxide can also be produced synthetically. Titanium dioxide is produced from either ilmenite, rutile or titanium slag. The titanium pigment is extracted by using either sulphuric acid (sulphate process) or chlorine (chloride route). The sulphate process employs simpler technology while the chloride route produces a purer product. Titanium Dioxide – classified by CAS No. 13463-67-7 – is mined as a mineral in magmatic rocks. It is non-flammable, non-explosive and titanium dioxide is the most widely used pigment because of its brightness and refractive index. Bulk Chemicals Pallate Over 4 million tons of titanium dioxide are used worldwide every year for a wide array of common applications like paint, coatings, plastics, papers, ink, food (it’s often used to whiten skim milk and to enhance the flavor of nuts, seeds, soup and beer), medicine and toothpaste. Titanium Dioxide is also used in cosmetics and skin care products as a pigment, in sunscreen and sunblock as a thickener to protect the skin from ultraviolet light. Titanium Dioxide, believe it or not, is used to mark the white lines on the tennis courts at Wimbledon. Indeed, titanium dioxide accounts for 70% of the total production of pigments worldwide because “titanium white,” as it’s often called, is one of the whitest materials known to exist on Earth. In fact, titanium dioxide is even more reflective than diamonds!

Distributor & High Volume Supplier CP Titanium – Commercially Pure Titanium Titanium CP4 – Grade 1 Commercially Pure Titanium Grade 1 is the softest titanium and has the highest ductility. It has good cold forming characteristics and provides excellent corrosion resistance. It also has excellent welding properties and high impact toughness. Applications Architecture, Automotive Desalination, Dimensional Stable Anodes, Medical, Marine, Processing & Chlorate Manufacturing Standards ASME SB-363, ASME SB-381, ASME SB-337, ASME SB-338, ASME SB-348, ASTM F-67, ASME SB-265, ASME SB-337, ASME SB-338 Forms Available Bar, Flanges, Forgings, Sheet, Welding Wire Titanium CP3 – Grade 2 Commercially Pure Titanium Grade 2 has moderate strength and excellent cold forming properties. It provides excellent welding properties and has excellent resistance to oxidation and corrosion. Applications Aerospace, Automotive, Chemical Processing & Chlorate Manufacturing, Desalination, Architecture, Hydro Carbon Processing, Marine, Medical, Power Generation Standards ASME SB-363, ASME SB-381, ASME SB-337, ASME SB-338, ASME SB-348, ASTM F-67, AMS 4921, ASME SB-265, AMS 4902, ASME SB-337, ASME SB-338, AMS 4942 Forms Available Bar, Fittings, Flanges, Forgings, Pipe, Plate, Sheet, Tube, Welding Wire, Wire Titanium CP2 – Grade 3 Commercially Pure Titanium Grade 3 is stronger and less formable than Titanium Grades 1 and 2. It is used in Aerospace and industrial applications that require moderate strength. Grade 3 titanium has excellent corrosion resistance. Applications Aerospace, Architecture, Automotive, Chemical Processing & Chlorate Manufacturing, Desalination, Hydro Carbon Processing, Marine, Medical, Power Generation, Standards ASME SB-363, ASME SB-381, ASME SB-337, ASME SB-338, ASME SB-348, ASTM F-67, AMS 4921, ASME SB-265, AMS 4902, ASME SB-337, ASME SB-338, AMS 4942 Forms Available Bar, Fittings, Flanges, Forgings, Pipe, Plate, Sheet, Tube, Welding Wire, Wire Titanium CP1 – Grade 4 Commercially Pure Titanium Grade 4 is stronger than CP Grades 2 & 3 – it can be cold formed, but has lower ductility. It has excellent corrosion resistance in a wide variety of environments. Grade 4 titanium is commonly used in Aerospace, Industrial and Medical applications where high strength is needed. Applications Aerospace, Chemical process, Industrial, Marine, Medical Standards ASME SB-363, ASME SB-381, ASME SB-337, ASME SB-348, ASTM F-67, AMS 4921, ASME SB-265, AMS 4901, ASME SB-338 Forms Available Bar, Forgings, Sheet, Welding Wire, Wire Titanium Grade 7 Titanium Grade 7 has physical and mechanical properties equivalent to CP3 titanium or Grade 2. It has excellent welding and fabrication properties and is extremely resistant to corrosion especially from reducing acids. Applications Chemical Processing, Desalination, Power generation Standards ASME SB-363, ASME SB-381, ASME SB-337, ASME SB-338, ASME SB-348, ASME SB-265, ASME SB-337, ASME SB-338, Forms Available Bar, Forgings, Plate, Sheet, Tube, Welding Wire, Wire Titanium Grade 11 – CP Ti-0.15Pd Titanium Grade 11 is highly resistant to corrosion has similar physical and mechanical properties to Titanium CP Grade 2. Applications Chemical processing, Desalination Power generation, Industrial Standards ASME SB-338 Forms Available Tube Titanium Based Alloys Titanium Grade 5 – Titanium 6Al-4V Titanium Grade 5 alloy is the most commercially available of all titanium alloys. It offers an excellent combination of high strength and toughness. Grade 5 titanium has good welding and fabrication characteristics. Applications Aerospace, Chemical Processing, Marine, Medical Standards ASME SB-265, AMS 4911, ASME SB-348, AMS 4928, AMS 4965, AMS 4967 Forms Available Titanium Grade 6 – Titanium 5Al-2.5Sn Titanium Grade 6 alloy offers good weldability, stability and strength at elevated temperatures. Applications Aerospace Standards ASME SB-381, AMS 4966, MIL-T-9046, MIL-T-9047, ASME SB-348, AMS 4976, AMS 4956, ASME SB-265, AMS 4910, AMS 4926 Forms Available Bar, Forgings Plate, Sheet, Wire Titanium Grade 9 – Titanium 3Al-2.5V Titanium Grade 9 has medium strength that falls between Grade 4 and Grade 5. It has excellent corrosion resistance and is used in Aerospace and Industrial applications. Grade 9 Titanium can be used at higher temperatures than Grades 1 through 4. Grade 9 titanium has good cold rolling properties. Applications Aerospace, Automotive, Chemical processing, Consumer applications, Marine, Medical, Transportation Standards AMS 4943, AMS 4944, ASME SB-338 Forms Available Bar, Forgings Plate, Sheet, Wire Titanium Grade 12 – Ti-0.3-Mo-0.8Ni This Titanium Grade 12 alloy is similar to Titanium Grades 2 and 3 except that Titanium Grade 12 has 0.3% molybdenum and 0.8% nickel. This offers enhanced corrosion resistance. Applications Chemical processing, Desalination, Power generation, Industrial Standards ASME SB-338 Forms Available Tube Titanium Grade 19 – Titanium Beta C Titanium Grade 19 has very high strength and can be heat treated. It offers good resistance to stress and corrosion. Applications Aerospace Automobile Standards MIL-T-9046, MIL-T-9047, ASME SB-348, AMS 4957, AMS 4958, ASME SB-265 Titanium Grade 23 – Titanium 6Al-4V ELI Titanium Grade 23 is similar to Grade 5 but has lower oxygen, nitrogen and iron. It has better ductility and fracture toughness than Titanium Grade 5. Applications Aerospace, Chemical Processing, Marine, Medical Standards AMS 4911, AMS 4928, AMS 4930, AMS 4931, AMS 4935, AMS 4965, AMS 4967, AMS 4985, AMS 4991, MIL -T-9046, MIL -T-9047, BSTA 10,11,12, BSTA 28,56,59, DIN 3.7165, AMS 4907 ELI, AMS 4930 ELI, AMS 4956 ELI, ASTM F136 ELI, UNS R56407 Forms Available Bar, Forgings, Plate, Sheet, Welding Wire, Wire Titanium 6Al-6V-2Sn – Titanium 6-6-2 Titanium 6-2-4-2 has excellent strength, stability, and creep resistance to temperatures as high as 550 °C. Applications Gas, Turbine Compressor Engine afterburner, Aerospace Standards AMS 4919, AMS 4952, AMS 4975, DIN 3.7164, GE B50 TF22, GE B50TF21, GE B50TF22, GE C50TF7, MIL F-83142, MIL T-9046, MIL T-9047, PWA 1220, UNS R54620 Forms Available Bar, Plate, Sheet Titanium 6Al-2Sn-4Zr-2Mo – Titanium 6-2-4-2 Titanium 6Al-6V-2Sn is a two-phase, Alpha Beta Alloy. It is usually used in the annealed or solution treated and aged conditions. It’s a heat treatable, high strength alloy with lower toughness and ductility than Titanium Grade 5 (6Al-4V) and it’s difficult to weld. Cold forming of Titanium 6Al-6V-2Sn is difficult because of its high strength and the large amount of spring-back that results. This grade can be welded by the inert gas shielded, fusion welding process but the heat effected area will have less ductility and toughness than the parent material. The hardness of Titanium 6-6-2 is approximately Rockwell C 36-38. This grade is primarily used for airframe and jet engine parts, rocket engine cases and ordinance components. Please call us to determine our minimum item quantity. Applications Airframe Components, Jet Engine Parts, Ordinance Components, Rocket Engine Cases Standards AMS 4981, MIL-T-9047, Forms Available Bar, Wire Sheet, Plate, Forgings, Fittings, Flanges, Seamless Pipe, Seamless Tube, Welded Pipe, Welded Tube Titanium 6Al-2Sn-4Zr-6Mo – Titanium 6-2-4-6 Titanium 6Al-2Sn-4Zr-6Mo is an Alpha-Beta Alloy and it’s generally regarded as the workhorse alloy of the titanium industry. The alloy is fully heat-treatable in section sizes up to one inch and is used up to approximately 400°C (750°F). Since it is one of the most commonly used alloys (over 70% of all alloy grades melted are a sub-grade of Ti-6-4,) its uses span many aerospace engine and airframe components. Titanium 6Al-2Sn-4Zr-6Mo is also used in lots of non-aerospace applications such as marine, offshore and power generation industries. This Alpha-Beta Alloy combines good corrosion resistance and strength with weldability and fabricability. The alloy is generally available in bar form and it’s typically used in deep sour well applications. This alloy can be hot or cold formed. Please call us to determine our minimum item quantity. Applications Aerospace Engines, Airframe Components, Marine Applications, Offshore Applications, Power Generation Applications Standards AMS 4981 Forms Available Bar, Plate, Sheet Titanium 8Al-1Mo-1V – Titanium 8-1-1 Titanium 8Al-1Mo-1V is a near Alpha Alloy that was primarily designed for use at elevated temperatures – up to 455 degrees centigrade. It offers the highest modulus and lowest density of all Titanium alloys. It has good creep strength and it’s weldable by the inert gas fusion and resistance-welding processes. Titanium 8Al-1Mo-1V is used in the annealed condition for such applications as airframe and jet engine parts that demand high strength, superior creep resistance and a good stiffness-to-density ratio. The machinability of this grade is similar to that of Titanium 6Al-4V. Please call us to determine our minimum item quantity. Applications Airframe Parts, Jet Engine Parts Standards MIL-T-9046, MIL-T-9047, AMS 4972, AMS 4915, AMS 4973, AMS 4955, AMS 4916 Forms Available Forgings, Bar, Sheet, Plate, Strip, Extrusions, Wire Titanium 10V-2Fe-3Al Titanium 10V-2Fe-3Al is a Titanium Beta Alloy. It is harder and stronger than many titanium alloys. This Titanium is a heat treatable alloy, it’s weldable and it’s easily formed. Titanium 10V-2Fe-3Al is an all Beta Alloy and is more difficult to machine than most titanium alloys. The chief problems include flank wear, spring-back and chip control. Because of these characteristics, positive rake chip grooves in combination with light hones on the cutting edge are advantageous. Please call us to determine our minimum item quantity. Applications Airframe Components, Compressor Blades, Disks, Wheels and Spacers Standards AMS 4983, AMS 4984, AMS 4986, AMS 4987 Forms Available Bar, Forgings, Plate, Sheet, Seamless Pipe, Seamless Tube, Welded Pipe, Welded Tube, Wire Titanium 15V-3Cr-3Sn-3Al This Metastable-Beta Alloy is used primarily in sheet metal form. It is age-hardenable and highly cold-formable. Titanium 15V-3-3-3 is often used to replace hot-formed Titanium Grade 5 (6Al-4V) sheet. It can also be produced as foil and is an excellent alloy for castings. For aerospace applications, this grade is often specified as AMS 4914. Please call to determine the minimum item quantity. Applications Aerospace Tank Applications, Airframe Applications, Castings, Fasteners High Strength Hydraulic Tubing Standards AMS 4914, ASTM B265 Forms Available Sheet, Foil Titanium Alpha Alloys Commercially pure titanium and alpha alloys of titanium are non-heat treatable and have very good welding characteristics. Applications Cryogenic applications, Airplane parts, Chemical processing equipment Standards AMS 4973, AMS 4976, AMS 4924, AMS 4972, MIL-T-9047, AMS 4910, ASTM B265, GR-6 MIL-T9046, AMS 4909, AMS 4915/4916, AMS 4966, AMS 4924, AMS 4973, AMS 4933, MIL-T-81556A A-1, MIL-T-81556A A-2, MIL-T-81556A A-4 Forms Available Bar, Forgings, Plate, Sheet Extrusions Titanium Beta Alloys Titanium Beta or near Beta Alloys are: Fully heat treatable Generally weldable Capable of high strengths Possess good creep resistance up to intermediate temperatures In the solution treated condition, excellent formability can be expected from Beta Alloys Titanium Beta Alloys are ideal for sporing applications. Common Titanium Beta Alloys include: Ti3Al8V6Cr4Mo4Zr ASTM Grade 19 Ti-3Al-8V-6Cr-4Mo-4Zr AMS 4983, 4984, 4987 Ti-10V-2Fe-3Al ASTM Grade 21 Ti-15Mo-3Nb-3Al-2Si AMS 4914 Ti-15V-3Cr-3Sn-3Al The Metastable Titanium Beta Alloys are heat treatable by solution treatment and ageing. Fully stable beta alloys can only be annealed. Applications Aerospace, Standards AMS 4914, AMS 4983, AMS 4984, AMS 4987, ASTM Grade 19, ASTM Grade 21 Forms Available Forgings Titanium Alpha-Beta Alloys Titanium Alpha Beta alloys are heat treatable and most of them are also weldable. The typical properties of Titanium Alpha Beta Alloys are: Medium to high strength levels; High temperature creep strength is not as less than most alpha alloys; Limited cold forming but hot forming qualities are normally good; The most commonly used Titanium Alpha Beta Alloy is Ti 6Al-4V. Titanium 6Al-4V has been developed in many variations of the basic formulation for numerous and widely differing applications. Other Titanium Alpha Beta Alloys include: 6Al-4V-ELI 6Al-6V-2Sn 6Al-2Sn-4Zr-2Mo 3Al-2.5V 8Mn Applications Aircraft and aircraft turbine parts, Chemical processing equipment, Marine hardware, Prosthetic devices Standards ASME SB-265, AMS 4911, ASME SB-348, AMS 4928, AMS 4965, AMS 4967, AMS 4981, MIL-T-9047, AMS 4930, AMS 4971, AMS 4907, ASTM F 136, MIL-T-9046, AMS 4918, DMS1879/2237, AMS 4908, AMS 4943, ASTM B348, AMS 4975, MIL-T-9047 G, AMS 4928, BMS 7-348, DMS 1570, AMS 4976, AMS 4920, AMS 4934 Forms Available Bar, Fittings, Flanges, Forgings, Pipe, Plate, Sheet, Tube, Wire Titanium Metals Titanium Specifications Titanium Grades CP4 – Grade 1 CP3- Grade 2 Titanium CP2 – Grade 3 CP1 – Grade 4 Grade 7 Grade 11 – CP Ti-0.15Pd Grade 5 – Titanium 6Al-4V Grade 6 – Titanium 5Al-2.5Sn Grade 9 – Titanium 3Al-2.5V Grade 12 – Ti-0.3-Mo-0.8Ni Grade 19 – Titanium Beta C Grade 23 – Titanium 6Al-4V ELI 6Al-6V-2Sn 6Al-2Sn-4Zr-2Mo 6Al-2Sn-4Zr-6Mo 8Al-1Mo-1V 10V-2Fe-3Al 15V-3Cr-3Sn-3Al Alpha Alloys Beta Alloys Alpha-Beta Alloys Titanium Dioxide TiO2 Titanium Applications Titanium Sheets Titanium Plates Titanium Wire Titanium Tubes & Tubing Titanium Round Bar Titanium Pipe We stock and sell Commercially Pure Titanium and Titanium Alloys in a broad range of forms and sizes. We can deliver production quantities in 90-120 days. close Request A Quote close Home Services Industries Resources About Contact Blog RFQ Sitemap

Ladhani Metal Corporation offers 1Cr25Ni20Si2 Boiler Half Round Tube Shields engineered for superior protection of boiler tubes in extremely high-temperature and abrasive service environments. Manufactured from a heat-resistant austenitic stainless steel alloy with high chromium, nickel, and silicon content, 1Cr25Ni20Si2 delivers exceptional resistance to oxidation, carburization, and high-temperature scaling. The added silicon improves anti-oxidation properties and enhances structural stability during prolonged thermal exposure. These shields are precision-formed into a half-round profile to ensure accurate coverage of straight boiler tube sections. They provide a durable physical barrier against flue gas erosion, soot blower impact, and particle-laden gas flow, significantly extending the operational life of boiler tubes. Ladhani Metal Corporation manufactures, supplies, and exports 1Cr25Ni20Si2 Boiler Half Round Tube Shields in a wide range of sizes, thicknesses, and lengths, catering to both domestic and international markets. 1Cr25Ni20Si2 Grade Chemical Composition – Heat Resistant Austenitic Stainless Steel • Carbon (C): ≤ 0.12% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): 1.50 – 2.50% • Chromium (Cr): 24.00 – 26.00% • Nickel (Ni): 19.00 – 22.00% • Iron (Fe): Balance Uses • Shields straight boiler tubes in superheaters, reheaters, and economizers • Protects against oxidation, scaling, and particulate erosion • Suitable for carburizing and high-silicon demanding environments • Extends tube life in power generation and process heating units Features • Enhanced oxidation resistance – Silicon addition boosts scale resistance at extreme temperatures • Superior thermal stability – Maintains mechanical integrity during prolonged heat exposure • Precision-engineered profile – Ensures a secure and accurate fit over boiler tubes • Flexible installation – Can be welded, clamped, or banded based on site requirements • Export-ready – Compliant with international quality and dimensional standards Applications • Thermal power stations – Protects superheater and reheater tubes from oxidation and erosion • Waste heat boilers – Guards tubes in severe heat recovery operations • Petrochemical and refinery heaters – Resists carburization in furnace conditions • Metallurgy and cement industries – Provides reliable tube protection under abrasive, high-heat gas flows Conclusion The 1Cr25Ni20Si2 Boiler Half Round Tube Shield from Ladhani Metal Corporation is designed for extreme service conditions where oxidation, scaling, and high-temperature wear are major concerns. With its silicon-enhanced heat-resistant alloy composition and precise manufacturing, it ensures prolonged boiler tube life and reduced downtime. Available in customized sizes for both domestic and export orders, these shields offer dependable performance in the world’s toughest boiler and furnace environments. For specifications and order inquiries, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered components designed to protect boiler tubes, superheaters, and heat exchanger coils from erosion, scaling, high-temperature oxidation, and mechanical wear. These shields are widely used in thermal power plants, petrochemical systems, and process industries where tubes are exposed to harsh operating conditions such as high-velocity flue gases, slag, and thermal cycling. Their semi-cylindrical shape allows for easy installation over both straight and curved tube surfaces without system disassembly. SS 410 U Type Inner Half Round Tube Shield The SS 410 U Type Inner Half Round Tube Shield is manufactured from martensitic stainless steel grade 410, which offers good corrosion resistance, excellent wear resistance, and moderate high-temperature strength. The inner U-type design is specifically configured to cover the internal arc of U-bend tubes, an area especially prone to erosion caused by turbulence, thermal gradients, and high-velocity gas impingement. SS 410 provides a hard, durable barrier against mechanical and thermal stress in industrial heat transfer equipment. • Inner U Type Half Round Tube Shield – Protects the internal bend of U-bend tubes from erosion, slag buildup, and high-temperature wear. Ladhani Metal Corporation is a dependable manufacturer, supplier, and exporter of SS 410 U Type Inner Half Round Tube Shields, offering cost-effective and durable protection solutions for critical tube components in high-temperature service environments. Chemical Composition of SS 410 – Martensitic Stainless Steel • Carbon (C): 0.08 – 0.15% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 11.5 – 13.5% • Nickel (Ni): ≤ 0.75% • Iron (Fe): Balance Applications: Best suited for moderate to high-temperature environments where abrasion resistance, mechanical strength, and oxidation resistance are important. Uses • Inner arc shielding of U-bend tubes in power plant boilers and superheaters exposed to flue gas turbulence • Protection of return bends in WHRBs and HRSGs where scaling and erosion are common • Applied in curved tube sections in steam reformers, furnaces, and heat exchangers • Ideal for use in chemical, cement, and metallurgical plants with abrasive flue gas and slag exposure • Suitable for systems requiring enhanced wear resistance under cyclic thermal loading Features • Good high-temperature oxidation resistance – Performs well in oxidizing atmospheres up to 650°C • Inner bend protection – Focused coverage for the area most affected by turbulent gas flow and erosion • Wear resistance – Offers excellent surface hardness and mechanical strength for long-term use • Secure fit – Custom-manufactured to match the tube’s radius and diameter for effective shielding • Quick installation – Can be fixed using clamp-on, banding, or welding techniques depending on system requirements • Cost-effective performance – Provides a durable and affordable solution for erosion and heat protection Applications • thermal power plants – Shields inner U-bends in boiler and superheater sections from erosion and slag impact • waste heat recovery systems – Used in WHRBs and HRSGs to protect internal tube arcs from scale and corrosion • petrochemical facilities – Installed in curved tube coils and return bends exposed to acidic and abrasive gas streams • industrial furnaces and reformers – Suitable for inner arc coverage in high-temperature gas flow zones • cement and chemical plants – Defends against mechanical wear and heat stress in return tube bends Conclusion The SS 410 U Type Inner Half Round Tube Shield by Ladhani Metal Corporation – manufacturer, supplier, and exporter – is a durable and cost-efficient solution for shielding the inner arc of U-bend tubes in thermally and mechanically demanding environments. Its martensitic structure and wear-resistant properties make it a reliable choice for protecting tube surfaces from erosion, scaling, and heat-induced damage in power and process applications. For custom orders, technical support, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are specially designed components used to protect boiler and heat exchanger tubes from erosion, wear, and high-temperature damage. Manufactured with precision and expertise, these shields ensure enhanced tube life, reduced maintenance, and efficient operation in demanding industrial environments. SS 304 Half Round Tube Shield The SS 304 Half Round Tube Shield is a semi-circular protective cover made from high-quality stainless steel grade 304. It is widely used in thermal and mechanical systems where tube surfaces are exposed to harsh operating conditions. The half-round design allows for easy installation over the tubes while providing robust protection against flue gases, abrasives, and thermal stress. Chemical Composition of SS 304 – Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 10.5% • Iron (Fe): Balance Applications: Widely used in boilers, heat exchangers, steam lines, and furnaces due to its excellent corrosion resistance, oxidation resistance, and durability in high-temperature environments. Uses Half Round Tube Shields are essential components in a wide range of thermal and mechanical systems. Their primary function is to protect exposed tube surfaces from damage caused by high-temperature operations, abrasive flow, and chemical environments. Common uses include: Boiler tube protection in thermal and power plants, where shields guard against ash erosion, slagging, and flame impingement. Shielding heat exchanger tubes from erosion and corrosion caused by turbulent gas flow and aggressive operating media. Preventing mechanical wear from high-velocity gas flow in furnace and combustion systems, especially in radiant heat zones. Providing long-term protection for high-temperature tubing in petrochemical and refinery systems, helping to reduce downtime and costly tube replacements. These shields serve as a barrier between the harsh environment and the structural tube surface, thereby improving operational safety, minimizing maintenance, and extending the service life of critical equipment. Features Ladhani Metal Corporation designs and manufactures Half Round Tube Shields with features that ensure long-term reliability, precise fit, and consistent performance even in the most challenging environments: Material: Made from high-grade stainless steel 304, offering excellent resistance to corrosion, oxidation, and heat-related stress. Design: Formed into a precise half-round shape to ensure full coverage and a secure fit over the outer curvature of tubes. Finish: Available in bright annealed, pickled & passivated, or other surface finishes as per client requirements for enhanced surface integrity and aesthetic appeal. Durability: Built with strong mechanical properties to withstand erosion, impact, and thermal cycling over prolonged use. Custom Sizes: Manufactured in a variety of thicknesses, lengths, and diameters to match specific tube dimensions and installation needs. Applications: Thermal Power Stations, where boiler tubes are continuously exposed to high heat and fly ash. Refineries and Petrochemical Plants, where process gases and liquids can be corrosive and erosive. Heat Recovery Steam Generators (HRSGs), where shields protect tubes during the waste heat recovery process. Chemical Processing Units, where exposure to reactive media necessitates strong material protection. Pulp and Paper Industry, particularly in recovery boilers and steam-generating systems. Industrial Boilers and Steam Systems that require reliable tube integrity for safe and efficient operation. These shields are critical to maintaining the integrity and efficiency of equipment in heavy-duty industrial systems. Conclusion The SS 304 Half Round Tube Shield by Ladhani Metal Corporation is a trusted solution for protecting vital tube systems in aggressive and high-temperature environments. Engineered for performance and longevity, these shields not only extend the life of your tubing systems but also minimize downtime and maintenance costs. With customizable dimensions, superior raw material, and precision forming, Ladhani Metal Corporation stands as a dependable partner for all your tube protection requirements. For more details, inquiries, or to request a quote, please contact Ladhani Metal Corporation.

DIN 2634 super duplex steel flanges PN 25 are high-performance weld neck flanges designed in accordance with the DIN 2634 standard. These flanges are engineered for high-pressure systems operating up to 25 bar (362 psi) and are manufactured from premium super duplex stainless steel grades. Known for their superior strength, excellent corrosion resistance, and enhanced resistance to stress corrosion cracking and pitting, super duplex flanges are ideally suited for demanding industrial environments. Their robust mechanical properties make them a reliable choice for aggressive service conditions and high-pressure applications. Ladhani Metal Corporation is a global leader in the manufacturing and supply of super duplex steel flanges. With advanced production facilities, precision engineering capabilities, and rigorous quality assurance practices, the company ensures that each flange meets the highest standards of safety, durability, and performance under extreme conditions. Pressure Rating: • PN 25 (25 bar / 362 psi): Designed for systems requiring high strength and exceptional corrosion resistance under elevated pressure conditions. Flange Type: • Weld Neck Flanges Featuring a tapered hub design, weld neck flanges deliver optimal stress distribution and secure, leak-free connections in systems exposed to thermal and mechanical loading. • Flat Face (FF) Flanges Recommended for use with softer gasket materials or systems incorporating cast iron components, flat face flanges provide uniform gasket compression and reliable sealing. Super Duplex Steel Grades and Typical Composition: Super Duplex Steel (UNS S32750 / S32760) – Ferritic-Austenitic Stainless Steel • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 6.0 – 8.0% • Molybdenum (Mo): 3.0 – 5.0% • Nitrogen (N): 0.2 – 0.3% • Iron (Fe): Balance Applications: Widely used in environments where high strength, corrosion resistance, and resistance to chloride-induced stress corrosion cracking are essential, such as offshore platforms, chemical plants, and desalination facilities. Applications of DIN 2634 Super Duplex Steel Flanges PN 25: • Offshore and Subsea Installations Withstand chloride-rich marine environments, offering long-term durability and resistance to seawater corrosion. • Chemical and Petrochemical Processing Suitable for handling aggressive chemicals, acids, and solvents under high pressure and temperature conditions. • Desalination and Water Treatment Plants Perform reliably in saline and brine-rich environments with superior resistance to pitting and crevice corrosion. • Power Generation and Heat Exchangers Offer excellent performance in high-temperature, high-pressure applications requiring strength and corrosion protection. • Pulp and Paper Industry Operate effectively in harsh chemical environments including bleach and acidic processing streams. Key Features: • Manufactured to DIN 2634 specifications for dimensional accuracy and pressure handling • PN 25 pressure class supports high-performance applications • Superior resistance to localized corrosion including pitting and stress corrosion cracking • High strength-to-weight ratio and excellent mechanical properties • Weld neck design ensures structural integrity and resistance to fatigue • Available in both UNS S32750 and S32760 super duplex grades • Customizable in size, pressure class, and surface finish upon request Conclusion: DIN 2634 super duplex steel flanges PN 25 from Ladhani Metal Corporation are engineered to deliver top-tier performance in environments where mechanical strength and corrosion resistance are non-negotiable. Their robust construction and excellent durability make them ideal for marine, chemical, and industrial applications operating under high pressure. For detailed specifications, project consultations, or a custom quote, contact Ladhani Metal Corporation today.

DIN 2634 monel flanges PN 25 are high-performance weld neck flanges manufactured in accordance with the DIN 2634 standard. Specifically engineered for high-pressure applications up to 25 bar (362 psi), these flanges are made from premium Monel alloys, offering excellent corrosion resistance, high strength, and durability in harsh environments. Their robust construction makes them ideal for applications involving aggressive chemical media and seawater where conventional metal flanges may degrade. Ladhani Metal Corporation is a trusted global manufacturer and supplier of Monel flanges, known for advanced manufacturing capabilities, precision machining, and strict adherence to international quality standards. Each flange undergoes thorough inspection and testing to ensure long-term reliability, safety, and resistance to extreme operating conditions. Pressure Rating: • PN 25 (25 bar / 362 psi): Designed for high-pressure systems requiring corrosion-resistant and mechanically robust flange connections. Flange Type: • Weld Neck Flanges Featuring an extended tapered hub, weld neck flanges provide excellent stress distribution at the base, ensuring strong and leak-proof joints in systems exposed to high pressure and thermal cycling. • Flat Face (FF) Flanges Ideal for use with softer gasket materials or in systems connecting to cast components, flat face flanges offer consistent and uniform gasket compression. Monel Grades and Typical Composition: Monel 400 (UNS N04400) – Nickel-Copper Alloy • Nickel (Ni): 63% minimum • Copper (Cu): 28-34% • Iron (Fe): 2.5% maximum • Manganese (Mn): 2.0% maximum • Carbon (C): 0.30% maximum Applications: Preferred in seawater and saltwater service, chemical processing, and marine equipment where excellent corrosion resistance in oxidizing and reducing environments is required. Monel K500 (UNS N05500) – Nickel-Copper Alloy with Additional Strengthening Elements • Nickel (Ni): 63% minimum • Copper (Cu): 28-34% • Iron (Fe): 2.5% maximum • Manganese (Mn): 2.0% maximum • Aluminum (Al) and Titanium (Ti): Added for age hardening Applications: Used in high-strength marine and chemical environments requiring enhanced mechanical properties and corrosion resistance. Applications of DIN 2634 Monel Flanges PN 25: • Offshore and Marine Systems Resists corrosion from seawater, brine, and marine atmospheres while maintaining strength under pressure. • Chemical and Petrochemical Processing Ideal for transporting corrosive media such as acids, alkalis, and chloride solutions at elevated pressures. • Desalination Plants Performs reliably in saltwater treatment and high-pressure water processing systems. • Power Generation Used in systems requiring resistance to erosion and corrosion in high-temperature steam and cooling circuits. • Pharmaceutical and Food Processing Applied in hygienic environments requiring corrosion resistance and chemical inertness. Key Features: • Manufactured in accordance with DIN 2634 dimensional and pressure requirements • PN 25 pressure rating supports high-pressure applications • Excellent resistance to corrosion, erosion, and stress corrosion cracking • Weld neck configuration ensures strong, vibration-resistant joints • Available in Monel 400 and Monel K500 alloys • Custom sizes, pressure classes, and surface finishes available upon request Conclusion: DIN 2634 monel flanges PN 25 from Ladhani Metal Corporation are engineered for demanding conditions where corrosion resistance, mechanical strength, and pressure integrity are essential. These Monel flanges provide long-term durability and reliable performance for advanced applications in marine, chemical, power generation, and industrial systems. For technical consultations, specialized requirements, or pricing information, contact Ladhani Metal Corporation today.

DIN 2634 stainless steel flanges PN 25 are precision-engineered weld neck flanges designed and manufactured in accordance with the DIN 2634 standard. These flanges are suitable for high-pressure pipeline systems operating up to 25 bar (362 psi), providing robust and secure connections for a variety of critical industrial applications. Constructed from high-quality stainless steel grades such as 304, 316, and 321, these flanges offer excellent mechanical properties, enhanced corrosion resistance, and dependable performance in aggressive service conditions. Ladhani Metal Corporation is a globally recognized manufacturer and supplier of stainless steel flanges, known for delivering high-precision products that meet stringent international quality and dimensional standards. Each flange undergoes rigorous testing and quality checks to ensure optimal performance, safety, and longevity under high-pressure conditions. Pressure Rating: • PN 25 (25 bar / 362 psi): Engineered for high-pressure environments requiring reinforced flange connections with reliable resistance to corrosion and mechanical stress. Flange Type: • Weld Neck Flanges Incorporating a long tapered hub, weld neck flanges help maintain pipe alignment, reduce stress concentration at the weld joint, and enable smooth fluid flow with minimal turbulence. • Flat Face (FF) Flanges Ideal for systems utilizing soft gaskets or cast components, flat face flanges promote consistent gasket compression and sealing integrity. Stainless Steel Grades and Typical Composition: Stainless Steel 304 • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 10.5% • Carbon (C): ≤ 0.08% (304), ≤ 0.03% (304L) • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Suitable for general-purpose piping systems in environments with moderate corrosion exposure, including potable water and light-duty process lines. Stainless Steel 316 • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% • Carbon (C): ≤ 0.08% (316), ≤ 0.03% (316L) • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Ideal for systems exposed to chlorides, cleaning agents, or other corrosive substances such as in chemical processing, pharmaceuticals, and marine environments. Stainless Steel 321 • Chromium (Cr): 17.0 – 19.0% • Nickel (Ni): 9.0 – 12.0% • Titanium (Ti): ≥ 5 × C (typically 0.20 – 0.70%) • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Frequently used in high-temperature services such as thermal processing equipment, exhaust systems, and heat exchangers due to its stability against intergranular corrosion. Applications of DIN 2634 Stainless Steel Flanges PN 25: • Chemical Processing Units Handles higher operating pressures in systems transporting acids, alkalis, and solvents. • Marine and Offshore Installations Resistant to pressure fluctuations and saltwater corrosion in offshore piping networks. • Pharmaceutical and Biotech Plants Used in clean process environments where both pressure integrity and corrosion resistance are critical. • Industrial Steam and Thermal Systems Suitable for steam distribution and thermal expansion pipelines operating under high pressure. • Power Generation Facilities Applied in turbine piping, heat recovery systems, and pressurized cooling water circuits. Key Features: • Manufactured to DIN 2634 dimensional and pressure specifications • PN 25 pressure rating supports high-pressure operation • Weld neck design ensures leak-tight, stress-resistant connections • Available in stainless steel grades 304, 316, 321 and their low-carbon variants • Superior resistance to high-temperature corrosion and chemical attack • Long-term mechanical strength and fatigue resistance • Custom sizes, finishes, and pressure ratings available upon request Conclusion: DIN 2634 stainless steel flanges PN 25 from Ladhani Metal Corporation are engineered for high-performance use in high-pressure industrial environments where safety, corrosion resistance, and durability are paramount. These flanges are ideal for chemical, marine, thermal, and high-purity applications requiring strong, leak-resistant, and corrosion-resistant connections. For technical support, customized solutions, or pricing details, contact Ladhani Metal Corporation today.

DIN 2633 titanium flanges PN 16 are precision-engineered weld neck flanges manufactured in accordance with the DIN 2633 standard. These flanges are designed for medium to high-pressure applications up to 16 bar (232 psi), delivering strong, lightweight, and corrosion-resistant connections in highly demanding pipeline environments. Constructed from premium-grade titanium alloys such as Grade 2 and Grade 5, they offer unmatched corrosion resistance, low density, and excellent mechanical properties, making them ideal for aggressive and weight-sensitive industrial applications. Ladhani Metal Corporation is a globally recognized manufacturer and supplier of titanium flanges, known for its technical expertise, product reliability, and adherence to stringent international specifications. Each flange undergoes meticulous quality checks to meet all applicable safety and performance standards. Pressure Rating: • PN 16 (16 bar / 232 psi): Designed for pipeline systems requiring secure, leak-free connections and outstanding corrosion protection under moderate pressure conditions. Flange Type: • Weld Neck Flanges Designed with an extended tapered hub to ensure superior structural support and reduce localized stress. Ideal for critical piping systems where fatigue resistance is essential. • Flat Face (FF) Flanges Provides an even sealing surface for use with softer gaskets or systems involving cast components, ensuring leak-proof performance and consistent compression. Titanium Grades and Full Composition: Titanium Grade 2 • Titanium (Ti): ≥ 98.8% • Iron (Fe): ≤ 0.30% • Oxygen (O): ≤ 0.25% • Carbon (C): ≤ 0.08% • Nitrogen (N): ≤ 0.03% • Hydrogen (H): ≤ 0.015% Applications: Preferred in desalination, chemical processing, marine, and medical applications due to its excellent corrosion resistance and biocompatibility. Titanium Grade 5 (Ti-6Al-4V) • Titanium (Ti): Balance • Aluminum (Al): 5.5 – 6.75% • Vanadium (V): 3.5 – 4.5% • Iron (Fe): ≤ 0.40% • Oxygen (O): ≤ 0.20% • Carbon (C): ≤ 0.08% • Nitrogen (N): ≤ 0.05% • Hydrogen (H): ≤ 0.015% Applications: Commonly used in aerospace, offshore, automotive, and industrial systems requiring high strength-to-weight ratio, fatigue resistance, and temperature stability. Applications of DIN 2633 Titanium Flanges PN 16: • Desalination Plants Highly resistant to seawater and chlorides, suitable for intake and discharge piping. • Chemical and Pharmaceutical Industries Used in handling reactive or highly corrosive media where stainless steel may fail. • Aerospace and Defense Ideal for weight-sensitive applications requiring structural integrity and resistance to atmospheric conditions. • Oil and Gas Reliable in offshore platforms and downhole equipment exposed to saltwater and high pressures. • Medical Equipment Manufacturing Biocompatible properties allow safe usage in hygienic and sterile processing systems. Key Features: • Precision manufactured to DIN 2633 specifications • PN 16 pressure rating for medium to high-pressure performance • Weld neck flange design ensures enhanced mechanical stability • Available in corrosion-resistant titanium grades 2 and 5 • Lightweight construction reduces overall system load • High resistance to acids, chlorides, and extreme environments • Custom dimensions, pressure classes, and finishes available on request Conclusion: DIN 2633 Titanium Flanges PN 16 from Ladhani Metal Corporation provide a high-performance solution for systems that require excellent corrosion resistance, mechanical strength, and reduced weight. With superior manufacturing precision and quality assurance, these flanges are suited for challenging environments in marine, aerospace, chemical, and medical sectors. For custom specifications, detailed technical assistance, or pricing inquiries, contact Ladhani Metal Corporation today.