Ladhani Metal Corporation offers SS U-Bend Half-Round Tube Shields engineered to protect U-bend sections of boiler tubes in power plants, waste heat recovery boilers (WHRBs), heat recovery steam generators (HRSGs), and industrial steam systems. U-bend regions are especially vulnerable to erosion, flue gas turbulence, oxidation, and abrasive wear from ash particles. These shields provide a robust protective barrier, reducing tube thinning and extending the operational lifespan of boiler tubes. Function of U-Bend Sections • Carry water or steam through tight-radius bends in boiler heating circuits • Continuously exposed to flue gas turbulence, high temperatures, and particle erosion • Require Half-Round Tube Shields to minimize wear and prevent premature tube failures Ladhani Metal Corporation manufactures, supplies, and exports SS U-Bend Half-Round Tube Shields in various lengths, radii, and thicknesses, ensuring precision fit and durability in demanding operating environments. Available Grades • SS 304 / SS 304L • SS 310 / SS 310S • SS 316 / SS 316L • SS 410 / SS 420 / SS 430 • 1Cr13 • 1Cr18Ni9Ti • 1Cr20Ni14Si2 • 1Cr25Ni20Si2 • Cr23Ni13 • Cr25Ni20 Applications: Suitable for protecting U-bend sections in boilers, reheaters, superheaters, and economizers exposed to high-temperature flue gases and erosion-prone conditions. Uses • Shields U-bend tube areas from high-velocity flue gas erosion and soot blower impact • Prevents thinning, scaling, and tube wall damage in curved tube regions • Improves reliability and service life of critical steam circuits • Applicable in power plants, WHRBs, HRSGs, and industrial boilers Features • Excellent resistance to erosion, scaling, and oxidation • Available in stainless steel and heat-resistant alloy grades for varied service conditions • High mechanical and thermal stability under continuous high temperatures • Precision-formed to match U-bend geometry for secure fit and easy installation Applications • Power plant boilers – Superheater and reheater U-bend protection • Waste heat recovery boilers – Guards tight-radius bends from abrasive gases • Heat recovery steam generators – Prevents erosion in high-velocity gas zones • Industrial boilers – Ensures long-term protection in steam and process plants Conclusion The SS U-Bend Half-Round Tube Shield by Ladhani Metal Corporation ensures dependable protection for boiler U-bend sections against erosion, oxidation, and thermal stress. Available in stainless steels and high-performance alloys including SS 304/304L, 310/310S, 316/316L, 410/420/430, 1Cr13, 1Cr18Ni9Ti, 1Cr20Ni14Si2, 1Cr25Ni20Si2, Cr23Ni13, and Cr25Ni20, these shields are manufactured with precision to meet global quality standards. For technical details and supply inquiries, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #HalfRoundReheaterShield #ReheaterTubeShield #BoilerReheaterProtection #PowerPlantTubeShield #BoilerErosionShield #SteamBoilerTubeShield #HighTempTubeShield #BoilerWearProtection

Half Round Tube Shield Ladhani Metal Corporation manufactures SS 316L Half Round Straight Tube Shields to provide corrosion-resistant protection for straight tubes in boilers, economizers, heat exchangers, and steam systems. SS 316L is a low-carbon version of SS 316, offering excellent resistance to intergranular corrosion, particularly after welding. These shields are suitable for use in chemical plants, marine environments, and flue gas systems with high chloride or acidic content. SS 316L Half Round Straight Tube Shield The SS 316L Half Round Straight Tube Shield is designed to fit securely over the outer surface of straight tubes, shielding them from erosive gas flow, thermal fatigue, and corrosive deposits. Its low carbon content ensures minimal carbide precipitation during welding, making it ideal for systems requiring extensive fabrication or exposure to corrosive condensates. SS 316L shields are used in high-humidity areas and aggressive service conditions to extend the life and performance of pressure tubes. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of SS 316L Half Round Straight Tube Shields, offering precision-engineered solutions for industrial thermal protection. Material Grade SS 316L – Austenitic stainless steel with low carbon for superior corrosion resistance and post-weld performance. Chemical Composition of SS 316L • Carbon (C): ≤ 0.03% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% • Iron (Fe): Balance Applications: Designed for welded and corrosion-sensitive systems such as boilers operating with acidic flue gas or chloride-laden environments. Uses • Protection of straight tubes in superheaters, economizers, and marine boilers • Suitable for chemical processing and desulfurization units • Used in wet flue gas paths of waste heat boilers • Shields steam lines and heat exchangers exposed to brine or acidic residues • Installed in paper, pulp, and food processing equipment with steam applications Features • Superior corrosion resistance – Especially in acidic and chloride-rich environments • Low carbon content – Prevents sensitization and supports post-weld integrity • High durability – Withstands thermal cycling, oxidation, and chemical attack • Precise fit – Manufactured to match specific tube diameters and wall clearances • Quick installation – Clamp-on, weld-on, and banding options available • Improves tube longevity – Reduces wear and the need for premature replacement Applications • power generation – Protects straight tubes in low-temperature and high-moisture flue zones • marine and offshore – Ideal for steam systems exposed to saltwater vapor • petrochemical and fertilizer plants – Prevents corrosion in chemical-laden environments • WHRBs and gas turbines – Shields tube surfaces from acidic or condensate-rich exhaust gases • food and pharmaceutical – Used where corrosion resistance and cleanliness are critical Conclusion The SS 316L Half Round Straight Tube Shield from Ladhani Metal Corporation provides enhanced resistance to corrosion, particularly in welded or moisture-prone areas. Its low carbon chemistry and molybdenum-enhanced durability make it a dependable choice for long-term tube protection in harsh thermal and chemical conditions. For tailored dimensions, technical support, or bulk supply inquiries, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered components used to protect boiler and heat exchanger tubes from erosion, scaling, and high-temperature corrosion. These shields are widely applied in industrial systems exposed to thermal cycling, aggressive gases, and particulate flow. Their half-round shape allows for simple and secure installation over straight or curved tube surfaces, extending tube life and reducing maintenance needs. 1Cr18Ni9Ti U Type Half Round Tube Shield The 1Cr18Ni9Ti U Type Half Round Tube Shield is specifically designed for protection of U-bend tube sections in high-temperature heat exchangers, boilers, and superheaters. Manufactured from 1Cr18Ni9Ti, a titanium-stabilized austenitic stainless steel equivalent to AISI 321, this shield delivers excellent resistance to intergranular corrosion, high-temperature oxidation, and thermal fatigue. The titanium addition prevents chromium carbide precipitation during welding or long-term heat exposure, making it ideal for use in welded structures subjected to continuous heating cycles. • Outer U Type Half Round Tube Shield – Provides robust protection to the outer curve of U-bends against hot gas erosion, flame impingement, and scaling. • Inner U Type Half Round Tube Shield – Safeguards the inner arc of the bend from localized wear, slag buildup, and thermal degradation. Ladhani Metal Corporation manufactures and exports 1Cr18Ni9Ti U Type Half Round Tube Shields to industries requiring high-performance shielding in aggressive thermal and chemical service environments, particularly where welding is involved. Chemical Composition of 1Cr18Ni9Ti – Titanium-Stabilized Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 17.0 – 19.0% • Nickel (Ni): 8.0 – 11.0% • Titanium (Ti): ≥ 5 × C content • Iron (Fe): Balance Applications: Suitable for high-temperature environments where welded tube systems are exposed to flue gases, thermal cycling, and corrosive atmospheres. Uses • Protection of U-bend tubes in reheaters and superheaters in thermal power plants • Shielding tube bends in waste heat recovery boilers and steam reformers • Coverage for curved tubes in high-temperature chemical process equipment • Guarding return bends in condensers and evaporators subject to scaling and oxidation • Ideal for systems requiring welded tube shields with resistance to intergranular corrosion Features • Titanium stabilization – Prevents sensitization and intergranular corrosion in welded or heat-affected zones, ensuring long-term structural reliability. • Excellent high-temperature resistance – Performs reliably under continuous thermal exposure, resisting scaling and surface degradation. • Complete bend protection – Available in both inner and outer U-type configurations for full shielding of curved tube areas. • Tight fit and customization – Manufactured to precise dimensions matching tube radius and diameter for secure, stable installation. • Easy to mount – Designed for hassle-free installation using clamps, tack welding, or banding without requiring tube removal. • Versatile performance – Suitable for oxidizing and mildly corrosive environments involving high heat and mechanical stress. Applications • thermal power stations – Protects U-bend tubes in critical heat transfer sections against heat-induced wear and gas corrosion. Enhances operational lifespan and safety. • petrochemical and refinery plants – Used in process heaters, reformers, and exchangers exposed to flue gases and thermal cycling. Maintains performance under continuous operation. • waste heat recovery systems – Shields curved tubes from erosion and scaling in gas recovery units and economizers. Improves durability in high-velocity environments. • chemical industries – Applied to tube bends in reactors, steam heaters, and evaporators where corrosion and temperature resistance are essential. • boiler systems and HRSGs – Provides reliable protection against fatigue, oxidation, and slag accumulation in high-temperature return bends. Conclusion The 1Cr18Ni9Ti U Type Half Round Tube Shield from Ladhani Metal Corporation is an advanced solution for protecting U-bend tube sections in thermally aggressive and welded environments. Its titanium-stabilized composition offers superior resistance to intergranular corrosion, oxidation, and thermal stress. Custom-engineered for precision fit and available in dual-sided configurations, this tube shield enhances system reliability and reduces maintenance needs in power, chemical, and industrial heating systems. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered components used to protect boiler and heat exchanger tubes from erosion, scaling, and high-temperature corrosion. These shields are widely applied in industrial systems exposed to thermal cycling, aggressive gases, and particulate flow. Their half-round shape allows for simple and secure installation over straight or curved tube surfaces, extending tube life and reducing maintenance needs. SS 410 U Type Half Round Tube Shield The SS 410 U Type Half Round Tube Shield is engineered for protective coverage of U-bend sections in heat exchanger coils, superheaters, and boiler return bends. Manufactured from SS 410, a hardenable martensitic stainless steel, this shield provides excellent resistance to abrasion, oxidation, and moderate corrosion. The U-type design offers tailored protection to both inner and outer arcs of tube bends—critical areas vulnerable to erosion, thermal stress, and slag buildup in high-temperature environments. • Outer U Type Half Round Tube Shield – Shields the outer curvature of the bend against high-temperature oxidation, impact wear, and flue gas turbulence. • Inner U Type Half Round Tube Shield – Protects the inner radius from scaling, corrosive gas attack, and localized erosion caused by gas flow irregularities. Ladhani Metal Corporation supplies SS 410 U Type Half Round Tube Shields designed for durability and cost-effectiveness in applications where wear resistance and thermal stability are key performance requirements. Chemical Composition of SS 410 – Martensitic Stainless Steel • Carbon (C): 0.08 – 0.15% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 11.5 – 13.5% • Nickel (Ni): ≤ 0.75% • Iron (Fe): Balance Applications: Ideal for moderate corrosion environments and high-temperature zones where mechanical strength, scaling resistance, and surface hardness are essential. Uses • Shielding U-bend tube sections in power plant superheaters and reheaters • Protection of tube bends in industrial boilers and HRSG return loops • Coverage for high-wear tube areas in WHRBs and economizers • Safeguarding of steam reformer and heat exchanger return curves in refineries • Suitable for dry, high-temperature service conditions with limited corrosive exposure Features • High surface hardness – SS 410 can be heat-treated to improve abrasion and erosion resistance, suitable for high-wear areas. • Oxidation resistance – Performs well in dry air at elevated temperatures, offering effective scaling resistance during continuous heating cycles. • Inner and outer coverage – Available in both configurations for complete U-bend protection, reducing risk of localized tube failure. • Precision fit – Fabricated to exact bend radius and tube diameter for a stable and secure installation. • Easy to install – Can be mounted using clamps, banding, or welding methods without major system modifications. • Economical option – Offers a cost-effective solution for environments where chemical corrosion is minimal but mechanical wear is high. Applications • thermal power plants – Protects U-bend tubes in reheaters and superheaters from oxidation, slag deposits, and particulate erosion. Improves thermal zone durability. • chemical and fertilizer industries – Installed in systems where temperature resistance is more critical than corrosion protection. Helps extend tube service life under cyclic heat conditions. • waste heat recovery units – Shields return bends in WHRBs and economizers exposed to hot gas streams and turbulent flow. • refinery and process heaters – Used in units with limited corrosive exposure where surface scaling and impact wear are primary concerns. • cement and metallurgical plants – Ideal for steam and gas heating lines where wear resistance at elevated temperatures is essential. Conclusion The SS 410 U Type Half Round Tube Shield from Ladhani Metal Corporation provides reliable and economical protection for U-bend tubes in heat-intensive, erosion-prone environments. With its martensitic structure and good thermal resistance, SS 410 is well-suited for applications where mechanical wear, oxidation, and surface degradation are key operational challenges. Customizable in size and bend radius, these shields deliver cost-efficient, high-performance solutions for extending tube life and reducing unplanned maintenance. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation.

Ladhani Metal Corporation manufactures and exports Half-Round Tube Shield Bends designed to protect boiler tube bends from erosion, oxidation, and abrasive flue gas impacts. Tube bends in boilers are critical zones where high-velocity gases, ash particles, and soot blower jets directly strike the tube surface, leading to premature wear, thinning, and possible tube failures. Half-Round Tube Shield Bends act as sacrificial barriers that absorb this wear, thereby extending the operational life of boiler tubes and reducing maintenance downtime. Function of Tube Shield Bends • Protect boiler tube bends from erosive flue gases and ash particle wear • Provide oxidation and scaling resistance in high-temperature service conditions • Extend tube life and minimize unplanned shutdowns • Ensure reliable performance in superheaters, reheaters, and economizers Ladhani Metal Corporation manufactures, supplies, and exports Half-Round Tube Shield Bends in multiple lengths, diameters, thicknesses, and bend radii to suit diverse boiler configurations in domestic and international markets. Available Grades • SS 304 / SS 304L • SS 310 / SS 310S • SS 316 / SS 316L • SS 410 / SS 420 / SS 430 • 1Cr13 • 1Cr18Ni9Ti • 1Cr20Ni14Si2 • 1Cr25Ni20Si2 • Cr23Ni13 • Cr25Ni20 Applications: Widely used in thermal power plants, WHRBs (Waste Heat Recovery Boilers), HRSGs (Heat Recovery Steam Generators), and industrial boilers for tube bend protection. Uses • Shields superheater and reheater tube bends from flue gas erosion • Protects against soot blower jet damage and abrasive particle wear • Extends boiler tube service life in high-temperature zones • Ideal for economizers and heat recovery sections in utility and industrial boilers Features • High resistance to erosion, scaling, and oxidation • Precision-formed for accurate fit on tube bends • Superior mechanical strength at elevated temperatures • Available in stainless steel and special heat-resistant alloy grades Applications • Power generation boilers – Superheater and reheater bend protection • Waste heat recovery boilers – Shields tube bends from particle-laden gas streams • Heat recovery steam generators – Ensures durability in cyclic operations • Industrial boilers – Long-lasting erosion resistance in flue gas paths Conclusion Half-Round Tube Shield Bends by Ladhani Metal Corporation provide reliable and durable protection for critical boiler tube bends exposed to erosion, oxidation, and abrasive wear. Available in stainless steels such as SS 304/304L, SS 310/310S, SS 316/316L, SS 410/420/430, and special alloys including 1Cr13, 1Cr18Ni9Ti, 1Cr20Ni14Si2, 1Cr25Ni20Si2, Cr23Ni13, and Cr25Ni20, these shields are engineered to extend tube life and minimize maintenance in demanding power and industrial applications. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #HalfRoundReheaterShield #ReheaterTubeShield #BoilerReheaterProtection #PowerPlantTubeShield #BoilerErosionShield #SteamBoilerTubeShield #HighTempTubeShield #BoilerWearProtection

Ladhani Metal Corporation offers SS Half Round Protection Shields for boiler tubes, designed to provide superior erosion and oxidation resistance in boilers, thermal power plants, waste heat recovery systems, and industrial steam generators. Boiler tubes in superheaters, reheaters, economizers, and water wall sections face high-velocity flue gases, abrasive ash particles, and soot blower impacts, which lead to erosion, thinning, and premature tube failure. SS Half Round Protection Shields act as a covering in these high-wear zones, ensuring longer service life and stable boiler efficiency. Function of Boiler Tubes • Carry water or steam through critical heating sections of the boiler • Exposed to erosion, oxidation, and scaling from hot flue gases and ash • Protected with Half Round Shields in high-impact and erosion-prone zones Ladhani Metal Corporation manufactures, supplies, and exports SS Half Round Protection Shields in various lengths, diameters, and thicknesses, tailored to client and project-specific requirements across domestic and international markets. Available Grades • SS 304 / SS 304L • SS 310 / SS 310S • SS 316 / SS 316L • SS 410 / SS 420 / SS 430 Applications: Used extensively in power plant boilers, WHRBs, HRSGs, and industrial steam systems where durability, corrosion resistance, and high-temperature stability are critical. Uses • Shields boiler tubes in superheater, reheater, and economizer sections • Protects against soot blower erosion and abrasive ash particle damage • Minimizes oxidation and scaling in high-temperature flue gas conditions • Extends service life of steam circuit components in thermal systems Features • High corrosion and oxidation resistance • Reliable mechanical strength at elevated temperatures • Wide grade availability to suit diverse operating atmospheres • Precision-engineered for accurate tube fit and easy installation Applications • Thermal power plant boilers – Reheater and superheater tube protection • Waste heat recovery boilers – Shields economizer tubes from erosion • HRSGs – Prevents damage to tubes under flue gas flow • Industrial steam plants and petrochemical heaters – Durable in high-temperature service Conclusion SS Half Round Protection Shields for Boiler Tubes by Ladhani Metal Corporation deliver long-lasting protection in the most demanding boiler environments. Manufactured from high-grade stainless steels, they ensure erosion resistance, thermal stability, and reduced maintenance downtime. Available in multiple SS grades and export-ready specifications, these shields are a trusted solution for power, petrochemical, and industrial boiler systems. For inquiries and technical assistance, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #HalfRoundReheaterShield #ReheaterTubeShield #BoilerReheaterProtection #PowerPlantTubeShield #BoilerErosionShield #SteamBoilerTubeShield #HighTempTubeShield #BoilerWearProtection

Product Name: Titanium racks for aluminum anodizing Material: Gr1, Gr2 Application: Electroplating, anodizing etc. Size: Customized Surface: Polished Type : Titanium racks / Titanium Jigs Dimenstion and shape : Customized, as customer's drawings Finishing : Polished Material : Pure Titanium(gr1 gr2) Condition : New Application : Electroplating, anodizing etc Color : Sliver.Grey Features : Anti-corrosion, good elasticity, smooth surface, dustproof, strong structure, good quality, fine surface We provide various titanium plating rack jigs. These ranges of jigs are available in different sizes to maximize customer satisfaction. Also, these jigs are provided at very affordable prices. Our technique can adapt jigs to the most suitable parts and materials, so that the product has higher durability and strength. Our production system reduces the entrainment of impurities and liquids between tanks and improves the passage of current, as well as its uniform distribution throughout the whole rack. The continuous availability of raw materials, laser cutting machines, folding and automatic welding machines makes our products the most competitive in the market and able to complete tasks within very tight deadlines. Chemical composition (Wt%) ASTM No. Fe max O max N max C max H max Pd Al Bal Grade 1 0.2 0.18 0.03 0.1 0.015 - - Ti Grade 2 0.3 0.25 0.03 0.1 0.015 - - Ti Physical Properties (Min) ASTM Grade Alloy Composition Tensile Strength Yield Strength Elongation min % ksi Mpa ksi Mpa Grade 1 Unalloyed Ti ("Pure") 35A -CP1 35 240 25 170 30 Grade 2 Unalloyed Ti ("Pure") 50A -CP2 58 400 40 275 25

LADHANI METAL CORPORATION 316/316L is the most commonly used austenitic stainless steel in the chemical process industry. The addition of molybdenum increases general corrosion resistance, improves chloride pitting resistance and strengthens the alloy in high temperature service. Through the controlled addition of nitrogen it is common for 316/316L to meet the mechanical properties of 316 straight grade, while maintaining a low carbon content. Since our establishment, we have become the well-known manufacturer, exporter and supplier of a high quality array of SS 316L Fittings. The offered range is manufactured by utilizing high grade raw material and advance technology by our skilled professionals. Apart from this, our range is tested on various parameters in order to ensure its durability and quality. Clients can avail these products from us in different specifications and at affordable prices. Features: Durability Finally finished Anti-corrosive RANGE : 15NB-1200NB. SCH:5, 10, 20, 30, 40, 60, 80, 100, 120, 140, 160, XXS. TYPE : Elbow: 45, 90 & 180Deg. Radius. Tee: Equal & UnEqual. Bend: Short & Long Radius. 1.5D, 2.5D, 3D, 5D, 6D, 10D. Stubend: Short & Long Neck Nipples, Caps & Triclover clamp,

LADHANI METAL CORPORATION 316/316L is the most commonly used austenitic stainless steel in the chemical process industry. The addition of molybdenum increases general corrosion resistance, improves chloride pitting resistance and strengthens the alloy in high temperature service. Through the controlled addition of nitrogen it is common for 316/316L to meet the mechanical properties of 316 straight grade, while maintaining a low carbon content. Since our establishment, we have become the well-known manufacturer, exporter and supplier of a high quality array of SS 316L Fittings. The offered range is manufactured by utilizing high grade raw material and advance technology by our skilled professionals. Apart from this, our range is tested on various parameters in order to ensure its durability and quality. Clients can avail these products from us in different specifications and at affordable prices. Features: Durability Finally finished Anti-corrosive RANGE : 15NB-1200NB. SCH:5, 10, 20, 30, 40, 60, 80, 100, 120, 140, 160, XXS. TYPE : Elbow: 45, 90 & 180Deg. Radius. Tee: Equal & UnEqual. Bend: Short & Long Radius. 1.5D, 2.5D, 3D, 5D, 6D, 10D. Stubend: Short & Long Neck Nipples, Caps & Triclover clamp,