DIN 2545 carbon steel flanges supplied by Ladhani Metal Corporation are designed for use in a variety of industrial applications requiring strength, durability, and resistance to corrosion under moderate temperatures and pressures. These flanges are made from high-quality carbon steel, offering excellent mechanical properties and weldability, making them suitable for both low- and high-pressure systems. With a pressure rating of PN 40, these flanges are built to withstand pressures up to 40 bar, ensuring secure and leak-free connections in demanding applications across different industries, including chemical processing, power generation, and construction. Types of DIN 2545 Carbon Steel Flanges: Flat Face Flanges (FF) – These flanges have a flat sealing surface and are primarily used in low-pressure applications where uniform distribution of sealing force is required. Raised Face Flanges (RF) – These flanges feature a raised surface around the bolt holes, providing enhanced sealing pressure, making them ideal for high-pressure applications. Ring-Type Joint (RTJ) Flanges – These flanges are designed with a groove to accommodate a metal sealing ring, providing a more secure seal for high-pressure systems or environments involving high temperatures. Grades and Chemical Composition: Carbon Steel A105 Chemical Composition: C: 0.35%, Mn: 0.60-0.90%, P: 0.035% max, S: 0.035% max, Si: 0.10-0.35%, Fe: balance A105 is the most commonly used grade of carbon steel for flanges, offering good strength and impact resistance. It is suitable for low to medium-pressure applications and is widely used in the manufacturing of flanges for piping systems, valves, and fittings. This grade is known for its versatility and ease of welding. Carbon Steel A350 LF2 Chemical Composition: C: 0.30%, Mn: 1.00-1.50%, P: 0.035% max, S: 0.035% max, Si: 0.10-0.35%, Fe: balance A350 LF2 is a low-temperature carbon steel grade designed for use in cryogenic and low-temperature applications. It offers good toughness and is resistant to brittle fracture in environments where temperatures are lower than standard carbon steel materials can withstand. A350 LF2 is commonly used in the oil, gas, and power generation industries. PN 40 Pressure Rating: The "PN" rating defines the flange's pressure capacity. PN 40 indicates that the flange is capable of handling pressures up to 40 bar, making it suitable for high-pressure systems in various industrial applications that require secure and durable connections. Applications: 1. Oil and Gas Industry: Pipelines and Transport Systems: Carbon steel flanges are commonly used in oil and gas pipelines to connect sections of pipe, valves, and other components. They provide a reliable seal and are capable of handling high pressures and extreme temperatures. Refineries and Petrochemical Plants: Carbon steel flanges are used in refining processes and in the transportation of crude oil and natural gas. They withstand the mechanical stresses and corrosion from various chemicals. Offshore Platforms: These flanges are used in offshore oil platforms where they handle high-pressure conditions in subsea pipelines and other critical infrastructure. 2. Chemical and Petrochemical Industry: Chemical Processing Equipment: Carbon steel flanges are used in reactors, heat exchangers, and distillation columns where the materials are exposed to high-pressure chemicals. They are preferred in systems that handle neutral or moderately corrosive chemicals. Pipelines for Chemical Transport: Used in chemical plants to transport fluids that are not highly corrosive, carbon steel flanges are durable and reliable in these settings. 3. Power Generation: Steam and Gas Turbines: Carbon steel flanges are widely used in power plants, especially in steam and gas turbines, where high pressure and temperatures are present. Cooling Systems: These flanges are found in cooling water systems, heat exchangers, and other systems where water or air is circulated to cool equipment. 4. Water Treatment Plants: Water Distribution Systems: Carbon steel flanges are commonly used to connect pipes in water distribution systems, especially in municipal water treatment and sewage treatment plants. Desalination Plants: These flanges are also employed in desalination plants, where seawater is converted into fresh water, due to their strength and ability to handle high-pressure environment. Conclusion: Ladhani Metal Corporation ensures the production of these carbon steel flanges meets the highest standards of quality and precision, ensuring long-term durability and reliable performance in even the most demanding applications. Each flange is manufactured according to strict specifications and undergoes thorough testing to guarantee safe and reliable operation in high-pressure environments. #din2545 #din2545flanges #din2545carbonsteelflanges #flanges #flangessupplier

Product name: Gr2 Titanium Welded pipe Standard:ASTM B338 ASTM B862 Material: GR1 GR2 GR7 GR12 Diameter:10-914mm Wall thickness:0.5-10mm Length:Max 16000mm Surface:Pickling surface/Polished Type:Seamless, welded Application:Heat Exchanger, chemical industry etc. Technique:Rolled Gr2 Titanium welded Tube With the progress of titanium welded pipe welding and heat treatment technology, the titanium thin wall welded pipe widely used single or multiple gun gun TIG/PAW from fusion welding, after welding using on-line heat treatment process, through optimizing welding, annealing process, make the parent metal, weld and heat affected zone microstructure close, basically eliminate the welding stress at the same time, make the weld microstructure of homogenization. By comparison, it is found that the weld composition of the titanium welded pipe is basically the same as that of the base metal, and the mechanical properties and anti-corrosion properties of the weld are the same as those of the base metal. Widely used in petrochemical industry, exhaust pipe industry, machinery industry and so on. Product Name Titanium welded tube/tubes/pipe/pipes/tubing Standard ASTM B338/ASME SB338, ASTM B337/ASME SB337, ASTM B862/ASME SB862 Material Gr1, Gr2, Gr7, Gr12, etc. Length ≤16000mm Size(mm) Diameter 10-914mm Section shape Round Certification ISO9001:2015 Surface Treatment pickling, polished, bright finish etc. Feature 1.Low Density and High Strength 2.Excellent Corrosion Resistance 3.Good resistance to effect of heat 4.Excellent Bearing to cryogenic property 5.Nonmagnetic and Non-toxic 6.Good thermal properties 7.Low Modulus of Elasticity In order to study the application technology of ultra-thin wall titanium welded pipe in the distillation seawater desalination, experts have studied and analyzed the heat exchange performance, mechanical performance, corrosion performance, preventing microbial adhesion and precipitation of non-condensible gas of ultra-thin wall titanium welded pipe, and compared with copper pipe, stainless steel pipe. The results show that the ultra-thin wall titanium welded pipe is the core component of distillation seawater desalination equipment, its wall thickness has been used in batches of 0.4mm, or even thinner, the product has excellent heat exchange performance, mechanical properties, corrosion resistance, is the preferred material of distillation seawater desalination heat exchange tube.

DIN 2634 monel flanges PN 25 are high-performance weld neck flanges manufactured in accordance with the DIN 2634 standard. Specifically engineered for high-pressure applications up to 25 bar (362 psi), these flanges are made from premium Monel alloys, offering excellent corrosion resistance, high strength, and durability in harsh environments. Their robust construction makes them ideal for applications involving aggressive chemical media and seawater where conventional metal flanges may degrade. Ladhani Metal Corporation is a trusted global manufacturer and supplier of Monel flanges, known for advanced manufacturing capabilities, precision machining, and strict adherence to international quality standards. Each flange undergoes thorough inspection and testing to ensure long-term reliability, safety, and resistance to extreme operating conditions. Pressure Rating: • PN 25 (25 bar / 362 psi): Designed for high-pressure systems requiring corrosion-resistant and mechanically robust flange connections. Flange Type: • Weld Neck Flanges Featuring an extended tapered hub, weld neck flanges provide excellent stress distribution at the base, ensuring strong and leak-proof joints in systems exposed to high pressure and thermal cycling. • Flat Face (FF) Flanges Ideal for use with softer gasket materials or in systems connecting to cast components, flat face flanges offer consistent and uniform gasket compression. Monel Grades and Typical Composition: Monel 400 (UNS N04400) – Nickel-Copper Alloy • Nickel (Ni): 63% minimum • Copper (Cu): 28-34% • Iron (Fe): 2.5% maximum • Manganese (Mn): 2.0% maximum • Carbon (C): 0.30% maximum Applications: Preferred in seawater and saltwater service, chemical processing, and marine equipment where excellent corrosion resistance in oxidizing and reducing environments is required. Monel K500 (UNS N05500) – Nickel-Copper Alloy with Additional Strengthening Elements • Nickel (Ni): 63% minimum • Copper (Cu): 28-34% • Iron (Fe): 2.5% maximum • Manganese (Mn): 2.0% maximum • Aluminum (Al) and Titanium (Ti): Added for age hardening Applications: Used in high-strength marine and chemical environments requiring enhanced mechanical properties and corrosion resistance. Applications of DIN 2634 Monel Flanges PN 25: • Offshore and Marine Systems Resists corrosion from seawater, brine, and marine atmospheres while maintaining strength under pressure. • Chemical and Petrochemical Processing Ideal for transporting corrosive media such as acids, alkalis, and chloride solutions at elevated pressures. • Desalination Plants Performs reliably in saltwater treatment and high-pressure water processing systems. • Power Generation Used in systems requiring resistance to erosion and corrosion in high-temperature steam and cooling circuits. • Pharmaceutical and Food Processing Applied in hygienic environments requiring corrosion resistance and chemical inertness. Key Features: • Manufactured in accordance with DIN 2634 dimensional and pressure requirements • PN 25 pressure rating supports high-pressure applications • Excellent resistance to corrosion, erosion, and stress corrosion cracking • Weld neck configuration ensures strong, vibration-resistant joints • Available in Monel 400 and Monel K500 alloys • Custom sizes, pressure classes, and surface finishes available upon request Conclusion: DIN 2634 monel flanges PN 25 from Ladhani Metal Corporation are engineered for demanding conditions where corrosion resistance, mechanical strength, and pressure integrity are essential. These Monel flanges provide long-term durability and reliable performance for advanced applications in marine, chemical, power generation, and industrial systems. For technical consultations, specialized requirements, or pricing information, contact Ladhani Metal Corporation today.

DIN 2634 titanium flanges PN 25 are high-performance weld neck flanges manufactured in accordance with the DIN 2634 standard. Specifically engineered for high-pressure applications up to 25 bar (362 psi), these flanges are made from premium titanium grades, offering exceptional corrosion resistance, low density, and outstanding mechanical strength even in the most demanding environments. Their lightweight yet highly durable nature makes them ideal for aggressive service conditions where conventional metal flanges may fail. Ladhani Metal Corporation is a trusted global manufacturer and supplier of titanium flanges, known for advanced manufacturing capabilities, precision machining, and strict adherence to international quality standards. Each flange undergoes thorough inspection and testing to ensure long-term reliability, safety, and resistance to extreme operating conditions. Pressure Rating: • PN 25 (25 bar / 362 psi): Designed for high-pressure systems requiring corrosion-resistant and mechanically robust flange connections. Flange Type: • Weld Neck Flanges Featuring an extended tapered hub, weld neck flanges provide excellent stress distribution at the base, ensuring strong and leak-proof joints in systems exposed to high pressure and thermal cycling. • Flat Face (FF) Flanges Ideal for use with softer gasket materials or in systems connecting to cast components, flat face flanges offer consistent and uniform gasket compression. Titanium Grades and Typical Composition: Titanium Grade 2 (UNS R50400) – Commercially Pure Titanium • Titanium (Ti): ≥ 98.9% • Iron (Fe): ≤ 0.30% • Oxygen (O): ≤ 0.25% • Carbon (C): ≤ 0.08% • Nitrogen (N): ≤ 0.03% • Hydrogen (H): ≤ 0.015% Applications: Preferred in seawater service, chemical processing, and marine equipment where high corrosion resistance in oxidizing environments is required. Titanium Grade 5 (Ti-6Al-4V / UNS R56400) – Alloyed Titanium • Titanium (Ti): Balance • Aluminum (Al): 5.5 – 6.75% • Vanadium (V): 3.5 – 4.5% • Iron (Fe): ≤ 0.40% • Oxygen (O): ≤ 0.20% Applications: Used in high-strength and high-temperature applications, including aerospace systems, pressure vessels, and heat exchangers due to its superior strength-to-weight ratio and fatigue resistance. Applications of DIN 2634 Titanium Flanges PN 25: • Offshore and Marine Systems Resists corrosion from seawater and brine solutions while maintaining strength under pressure. • Chemical and Petrochemical Processing Ideal for transporting corrosive media such as chlorine, acids, and alkalis at elevated pressures. • Desalination Plants Performs exceptionally in salt-laden and high-pressure water processing systems. • Aerospace and Defense Equipment Used in high-performance fluid systems requiring lightweight and high-strength components. • Pharmaceutical and Medical Systems Applied in ultra-clean and sterile environments where corrosion-free operation is essential. Key Features: • Manufactured in accordance with DIN 2634 dimensional and pressure requirements • PN 25 pressure rating supports high-pressure applications • Lightweight construction reduces system weight without compromising strength • Exceptional resistance to corrosion, erosion, and high-temperature oxidation • Weld neck configuration ensures strong, vibration-resistant joints • Available in commercially pure and alloyed titanium grades • Custom sizes, pressure classes, and surface finishes available upon request Conclusion: DIN 2634 titanium flanges PN 25 from Ladhani Metal Corporation are engineered to perform in extreme conditions where high pressure, aggressive media, and corrosion resistance are critical. With superior mechanical strength and long-term durability, these titanium flanges are ideal for advanced applications in marine, chemical, aerospace, and industrial systems. For technical consultations, specialized requirements, or pricing information, contact Ladhani Metal Corporation today.

DIN 2633 super duplex steel flanges PN 16 are high-performance weld neck flanges manufactured in accordance with the DIN 2633 standard. Engineered for medium-pressure piping systems with a pressure rating of up to 16 bar (232 psi), these flanges are made from super duplex stainless steels, which offer a superior combination of high mechanical strength and outstanding corrosion resistance. They are specifically designed for critical applications in aggressive environments where standard stainless or duplex steels may not provide sufficient durability. Ladhani Metal Corporation is a globally recognized manufacturer and supplier of super duplex steel flanges, known for precision manufacturing, strict quality control, and compliance with international material and dimensional standards. Each flange is tested for performance, safety, and resistance to harsh operating conditions. Pressure Rating: • PN 16 (16 bar / 232 psi): Suitable for systems requiring secure, corrosion-resistant, and high-strength connections under moderate pressure. Flange Type: • Weld Neck Flanges Featuring a long tapered hub, these flanges offer optimal stress distribution, reduce turbulence at the joint, and ensure reliable pipe alignment in high-stress environments. • Flat Face (FF) Flanges Designed for uniform gasket compression, particularly effective when used with soft gaskets or cast iron mating components. Super Duplex Steel Grades and Full Composition: Super Duplex 2507 (UNS S32750) • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 6.0 – 8.0% • Molybdenum (Mo): 3.0 – 5.0% • Nitrogen (N): 0.24 – 0.32% • Manganese (Mn): ≤ 1.2% • Silicon (Si): ≤ 0.8% • Carbon (C): ≤ 0.03% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.02% • Iron (Fe): Balance Applications: Ideal for offshore platforms, subsea systems, desalination plants, chemical process systems, and high-chloride environments requiring superior corrosion and pitting resistance. Super Duplex S32760 • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 6.0 – 8.0% • Molybdenum (Mo): 3.0 – 4.0% • Tungsten (W): 0.5 – 1.0% • Copper (Cu): 0.5 – 1.0% • Nitrogen (N): 0.2 – 0.3% • Carbon (C): ≤ 0.03% • Iron (Fe): Balance Applications: Commonly used in seawater systems, heat exchangers, fire-fighting systems, and oil & gas equipment due to excellent resistance to erosion, stress corrosion cracking, and fatigue. Applications of DIN 2633 Super Duplex Steel Flanges PN 16: • Offshore Oil and Gas Platforms Resists chloride-induced corrosion and high mechanical loads in topside and subsea installations. • Desalination and Marine Systems Performs well in high-salinity environments where other alloys may suffer from pitting or crevice corrosion. • Chemical and Petrochemical Plants Suitable for handling strong acids, caustic solutions, and oxidizing environments at elevated temperatures and pressures. • Fire Protection and Water Injection Systems Ensures reliability and corrosion resistance in safety-critical and high-pressure fluid delivery systems. • Pulp and Paper Industry Used in bleach plant systems and recovery boilers where exposure to corrosive agents is routine. Key Features: • Manufactured in compliance with DIN 2633 standards • PN 16 pressure rating for medium-pressure service • Weld neck design ensures secure, vibration-resistant connections • Available in high-strength super duplex grades S32750 and S32760 • Excellent resistance to pitting, crevice corrosion, and stress corrosion cracking • High mechanical strength and fatigue resistance • Custom sizes, coatings, and pressure classes available upon request Conclusion: DIN 2633 super duplex steel flanges PN 16 from Ladhani Metal Corporation are designed to meet the most demanding operational requirements in highly corrosive and high-pressure environments. With unmatched strength and corrosion resistance, these flanges are ideal for offshore, marine, chemical, and industrial applications. For technical specifications, custom designs, or pricing information, contact Ladhani Metal Corporation today.

DIN 2633 titanium flanges PN 16 are precision-engineered weld neck flanges manufactured in accordance with the DIN 2633 standard. These flanges are designed for medium to high-pressure applications up to 16 bar (232 psi), delivering strong, lightweight, and corrosion-resistant connections in highly demanding pipeline environments. Constructed from premium-grade titanium alloys such as Grade 2 and Grade 5, they offer unmatched corrosion resistance, low density, and excellent mechanical properties, making them ideal for aggressive and weight-sensitive industrial applications. Ladhani Metal Corporation is a globally recognized manufacturer and supplier of titanium flanges, known for its technical expertise, product reliability, and adherence to stringent international specifications. Each flange undergoes meticulous quality checks to meet all applicable safety and performance standards. Pressure Rating: • PN 16 (16 bar / 232 psi): Designed for pipeline systems requiring secure, leak-free connections and outstanding corrosion protection under moderate pressure conditions. Flange Type: • Weld Neck Flanges Designed with an extended tapered hub to ensure superior structural support and reduce localized stress. Ideal for critical piping systems where fatigue resistance is essential. • Flat Face (FF) Flanges Provides an even sealing surface for use with softer gaskets or systems involving cast components, ensuring leak-proof performance and consistent compression. Titanium Grades and Full Composition: Titanium Grade 2 • Titanium (Ti): ≥ 98.8% • Iron (Fe): ≤ 0.30% • Oxygen (O): ≤ 0.25% • Carbon (C): ≤ 0.08% • Nitrogen (N): ≤ 0.03% • Hydrogen (H): ≤ 0.015% Applications: Preferred in desalination, chemical processing, marine, and medical applications due to its excellent corrosion resistance and biocompatibility. Titanium Grade 5 (Ti-6Al-4V) • Titanium (Ti): Balance • Aluminum (Al): 5.5 – 6.75% • Vanadium (V): 3.5 – 4.5% • Iron (Fe): ≤ 0.40% • Oxygen (O): ≤ 0.20% • Carbon (C): ≤ 0.08% • Nitrogen (N): ≤ 0.05% • Hydrogen (H): ≤ 0.015% Applications: Commonly used in aerospace, offshore, automotive, and industrial systems requiring high strength-to-weight ratio, fatigue resistance, and temperature stability. Applications of DIN 2633 Titanium Flanges PN 16: • Desalination Plants Highly resistant to seawater and chlorides, suitable for intake and discharge piping. • Chemical and Pharmaceutical Industries Used in handling reactive or highly corrosive media where stainless steel may fail. • Aerospace and Defense Ideal for weight-sensitive applications requiring structural integrity and resistance to atmospheric conditions. • Oil and Gas Reliable in offshore platforms and downhole equipment exposed to saltwater and high pressures. • Medical Equipment Manufacturing Biocompatible properties allow safe usage in hygienic and sterile processing systems. Key Features: • Precision manufactured to DIN 2633 specifications • PN 16 pressure rating for medium to high-pressure performance • Weld neck flange design ensures enhanced mechanical stability • Available in corrosion-resistant titanium grades 2 and 5 • Lightweight construction reduces overall system load • High resistance to acids, chlorides, and extreme environments • Custom dimensions, pressure classes, and finishes available on request Conclusion: DIN 2633 Titanium Flanges PN 16 from Ladhani Metal Corporation provide a high-performance solution for systems that require excellent corrosion resistance, mechanical strength, and reduced weight. With superior manufacturing precision and quality assurance, these flanges are suited for challenging environments in marine, aerospace, chemical, and medical sectors. For custom specifications, detailed technical assistance, or pricing inquiries, contact Ladhani Metal Corporation today.

DIN 2632 duplex steel flanges PN 10 are robust weld neck flanges manufactured in accordance with the DIN 2632 standard, designed for medium-pressure applications up to 10 bar (145 psi). These flanges are made from duplex stainless steel, a material that combines the high strength of ferritic steel with the corrosion resistance of austenitic stainless steel. This dual-phase microstructure provides excellent resistance to stress corrosion cracking, pitting, and crevice corrosion in aggressive environments. Ladhani Metal Corporation is a reputable global manufacturer and supplier of duplex steel flanges, offering products with precise dimensions, superior mechanical integrity, and full compliance with international industry standards. All flanges are rigorously inspected and tested to ensure reliability in demanding applications. Pressure Rating: • PN 10 (10 bar / 145 psi): Ideal for medium-pressure piping systems requiring a balance of strength, corrosion resistance, and cost efficiency. Flange Type: • Weld Neck Flanges Engineered with a long tapered hub for secure and stress-reducing pipe-to-flange connections. Supports smooth fluid transition and minimizes turbulence. • Flat Face (FF) Flanges Flat face construction ensures even gasket compression, suitable for use with soft gasket materials and cast equipment. Duplex Steel Grades and Composition: Duplex 2205 (UNS S32205 / S31803) • Chromium (Cr): 21–23% • Nickel (Ni): 4.5–6.5% • Molybdenum (Mo): 2.5–3.5% • Nitrogen (N): 0.14–0.20% • Manganese (Mn): ≤ 2.0% • Carbon (C): ≤ 0.03% • Iron (Fe): Balance Applications: Duplex 2205 offers outstanding resistance to pitting, crevice corrosion, and chloride stress corrosion cracking. It is widely used in offshore platforms, chemical processing, marine environments, and desalination plants. Applications of DIN 2632 Duplex Steel Flanges PN 10: • Oil and Gas Industry Used in offshore and onshore systems handling sour gas, saltwater, and corrosive media. • Chemical and Petrochemical Ideal for reactors, heat exchangers, and piping exposed to acids, chlorides, and oxidizing substances. • Marine and Shipbuilding Provides excellent performance in seawater systems, ballast water treatment, and ship hull piping. • Desalination and Water Treatment Ensures long-term performance in high-salinity and high-chloride environments. • Pulp and Paper Applied in bleach plants and other areas exposed to aggressive chemical agents. Key Features: • Manufactured to DIN 2632 specifications • PN 10 pressure rating suitable for medium-pressure applications • Weld neck design for high-integrity, low-stress connections • Available in Duplex 2205 and Super Duplex 2507 for tailored corrosion resistance and strength • Flat face option for optimal gasket compression • Excellent resistance to stress corrosion cracking and pitting • High strength-to-weight ratio • Custom sizes, pressure classes, and finishes available upon request Conclusion: DIN 2632 duplex steel flanges PN 10 from Ladhani Metal Corporation provide a highly reliable, corrosion-resistant, and mechanically strong solution for demanding industrial applications. With advanced material options such as Duplex 2205 and Super Duplex 2507, these flanges are well-suited for marine, chemical, oil and gas, and water treatment sectors. For customized solutions, technical support, or pricing details, contact Ladhani Metal Corporation today

DIN 2632 Monel flanges PN 10 are high-performance weld neck flanges manufactured to meet the DIN 2632 standard, specifically designed for medium-pressure applications up to 10 bar (145 psi). These flanges are made from Monel, a nickel-copper alloy known for its outstanding corrosion resistance, particularly in marine and chemical environments. With excellent mechanical strength and superior durability in highly aggressive conditions, DIN 2632 Monel flanges provide a reliable solution where standard materials may fail. Ladhani Metal Corporation is a leading global manufacturer and supplier of Monel flanges, delivering consistent quality, dimensional accuracy, and full compliance with international standards. Each flange is meticulously tested to ensure optimum performance under demanding industrial conditions. Pressure Rating: • PN 10 (10 bar / 145 psi): Suitable for medium-pressure piping systems requiring high corrosion resistance and mechanical stability. Flange Type: • Weld Neck Flanges Designed with a long tapered hub that ensures precise pipe alignment and reduces localized stress at the flange connection. Ideal for high-integrity, high-strength joints. • Flat Face (FF) Flanges Flat face configuration ensures uniform gasket compression, making them ideal for systems using soft gaskets or connecting to cast components. Monel Grades and Composition: Monel 400 • Nickel (Ni): Minimum 63% • Copper (Cu): 28–34% • Iron (Fe): 2.0–2.5% • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 0.5% • Carbon (C): ≤ 0.3% Applications: Monel 400 is widely used in chemical and marine environments due to its excellent resistance to seawater, acids, and alkalis. It is commonly used in heat exchangers, seawater piping, pumps, and valves handling corrosive media. Monel K500 • Nickel (Ni): 63% minimum • Copper (Cu): 27–33% • Aluminum (Al): 2.3–3.15% • Titanium (Ti): 0.35–0.85% • Iron (Fe): ≤ 2.0% • Carbon (C): ≤ 0.25% Applications: Monel K500 combines the corrosion resistance of Monel 400 with greater strength and hardness due to age-hardening. It is used in marine shafts, chemical processing equipment, oil and gas tools, and high-strength fasteners. Applications of DIN 2632 Monel Flanges PN 10: • Marine and Offshore Ideal for seawater handling systems, shipbuilding, desalination units, and offshore platforms exposed to highly corrosive saltwater environments. • Chemical and Petrochemical Industry Used in pipelines and vessels transporting sulfuric acid, hydrofluoric acid, alkalis, and other aggressive substances. • Oil and Gas Industry Suitable for sour gas environments, offshore rigs, and subsea applications where corrosion and stress resistance are critical. • Power Generation Applied in cooling systems, condensers, and process equipment subjected to brine, steam, and corrosive gases. Key Features: • Fabricated to DIN 2632 specifications • PN 10 pressure rating for medium-pressure service • Weld neck and flat face designs available • Manufactured using Monel 400 and Monel K500 for corrosion-intensive applications • Exceptional resistance to seawater, acids, and alkalis • High strength and toughness even at elevated temperatures • Ideal for marine, chemical, and oil & gas industries • Custom dimensions, finishes, and alloy compositions available upon request Conclusion: DIN 2632 Monel Flanges PN 10 from Ladhani Metal Corporation are engineered to provide superior corrosion resistance, mechanical strength, and long-term reliability in medium-pressure industrial systems. With Monel grades 400 and K500, these flanges are well-suited for harsh environments in the marine, chemical, petrochemical, and offshore sectors. For detailed specifications, custom requirements, or pricing information, contact Ladhani Metal Corporation today.

DIN 2630 Duplex flanges PN 2.5 are high-performance weld neck flanges manufactured to DIN 2630 standards, specifically designed for low-pressure applications up to 2.5 bar (36.25 psi). These flanges are made from Duplex stainless steels such as Duplex 2205 and Super Duplex 2507, which offer a balanced combination of high strength and excellent resistance to corrosion, stress corrosion cracking, and pitting. Engineered for demanding environments, these flanges provide long-lasting reliability in low-pressure systems exposed to aggressive chemicals and high temperatures. Ladhani Metal Corporation is a trusted global supplier and manufacturer of Duplex flanges, known for consistent quality and technical expertise. Our DIN 2630 PN 2.5 Duplex weld neck flanges are widely used in offshore, chemical, petrochemical, and marine industries where both mechanical performance and corrosion resistance are essential. Each flange undergoes rigorous quality control to ensure conformance with international standards and application-specific requirements. Pressure Rating: • PN 2.5 (2.5 bar / 36.25 psi): Designed for low-pressure operations requiring enhanced strength and superior corrosion resistance. Flange Type: • Weld Neck Flanges Designed with a tapered hub to evenly distribute stress and minimize erosion and turbulence in the flow path, making them suitable for high-integrity piping connections. • Flat Face (FF) Flanges Flat face flanges ensure even gasket compression and are ideal for use with cast equipment or non-metallic gasket materials in low-pressure systems. Duplex Grades and Full Composition: Duplex 2205 (UNS S32205 / S31803) • Chromium (Cr): 21.0 – 23.0% • Nickel (Ni): 4.5 – 6.5% • Molybdenum (Mo): 2.5 – 3.5% • Nitrogen (N): 0.08 – 0.20% • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Carbon (C): ≤ 0.03% • Iron (Fe): Balance Applications: Combines high strength with excellent resistance to pitting and crevice corrosion. Common in chemical process plants, desalination systems, and marine structures. Applications of DIN 2630 Duplex Flanges PN 2.5: • Offshore and Marine Engineering Used in piping systems exposed to seawater and harsh marine environments where strength and corrosion resistance are vital. • Chemical and Petrochemical Industry Ideal for handling corrosive process fluids, acids, and chloride-rich environments at low pressure. • Desalination Plants Used in brine systems and piping exposed to high chloride levels and fluctuating temperatures. • Oil and Gas Industry Applied in low-pressure sections of oil rigs, refineries, and gas processing systems where reliability and resistance to sulfide stress cracking are critical. Key Features: • Compliant with DIN 2630 specifications • PN 2.5 rating suitable for low-pressure service • Weld neck design provides high-integrity and stress-distributed connections • Flat face option for soft gasket compatibility and uniform sealing • Manufactured from Duplex and Super Duplex stainless steels for enhanced performance • High strength-to-weight ratio and excellent corrosion resistance • Custom sizes, pressure classes, and surface finishes available upon request Conclusion: DIN 2630 Duplex Flanges PN 2.5 from Ladhani Metal Corporation are engineered for performance in corrosive, high-stress environments where low-pressure service demands superior materials. Combining the strength and corrosion resistance of Duplex and Super Duplex alloys, these flanges ensure long-term durability and safety across a variety of critical applications. Contact Ladhani Metal Corporation for detailed specifications, customization options, or pricing information.