Distributor & High Volume Supplier CP Titanium – Commercially Pure Titanium Titanium CP4 – Grade 1 Commercially Pure Titanium Grade 1 is the softest titanium and has the highest ductility. It has good cold forming characteristics and provides excellent corrosion resistance. It also has excellent welding properties and high impact toughness. Applications Architecture, Automotive Desalination, Dimensional Stable Anodes, Medical, Marine, Processing & Chlorate Manufacturing Standards ASME SB-363, ASME SB-381, ASME SB-337, ASME SB-338, ASME SB-348, ASTM F-67, ASME SB-265, ASME SB-337, ASME SB-338 Forms Available Bar, Flanges, Forgings, Sheet, Welding Wire Titanium CP3 – Grade 2 Commercially Pure Titanium Grade 2 has moderate strength and excellent cold forming properties. It provides excellent welding properties and has excellent resistance to oxidation and corrosion. Applications Aerospace, Automotive, Chemical Processing & Chlorate Manufacturing, Desalination, Architecture, Hydro Carbon Processing, Marine, Medical, Power Generation Standards ASME SB-363, ASME SB-381, ASME SB-337, ASME SB-338, ASME SB-348, ASTM F-67, AMS 4921, ASME SB-265, AMS 4902, ASME SB-337, ASME SB-338, AMS 4942 Forms Available Bar, Fittings, Flanges, Forgings, Pipe, Plate, Sheet, Tube, Welding Wire, Wire Titanium CP2 – Grade 3 Commercially Pure Titanium Grade 3 is stronger and less formable than Titanium Grades 1 and 2. It is used in Aerospace and industrial applications that require moderate strength. Grade 3 titanium has excellent corrosion resistance. Applications Aerospace, Architecture, Automotive, Chemical Processing & Chlorate Manufacturing, Desalination, Hydro Carbon Processing, Marine, Medical, Power Generation, Standards ASME SB-363, ASME SB-381, ASME SB-337, ASME SB-338, ASME SB-348, ASTM F-67, AMS 4921, ASME SB-265, AMS 4902, ASME SB-337, ASME SB-338, AMS 4942 Forms Available Bar, Fittings, Flanges, Forgings, Pipe, Plate, Sheet, Tube, Welding Wire, Wire Titanium CP1 – Grade 4 Commercially Pure Titanium Grade 4 is stronger than CP Grades 2 & 3 – it can be cold formed, but has lower ductility. It has excellent corrosion resistance in a wide variety of environments. Grade 4 titanium is commonly used in Aerospace, Industrial and Medical applications where high strength is needed. Applications Aerospace, Chemical process, Industrial, Marine, Medical Standards ASME SB-363, ASME SB-381, ASME SB-337, ASME SB-348, ASTM F-67, AMS 4921, ASME SB-265, AMS 4901, ASME SB-338 Forms Available Bar, Forgings, Sheet, Welding Wire, Wire Titanium Grade 7 Titanium Grade 7 has physical and mechanical properties equivalent to CP3 titanium or Grade 2. It has excellent welding and fabrication properties and is extremely resistant to corrosion especially from reducing acids. Applications Chemical Processing, Desalination, Power generation Standards ASME SB-363, ASME SB-381, ASME SB-337, ASME SB-338, ASME SB-348, ASME SB-265, ASME SB-337, ASME SB-338, Forms Available Bar, Forgings, Plate, Sheet, Tube, Welding Wire, Wire Titanium Grade 11 – CP Ti-0.15Pd Titanium Grade 11 is highly resistant to corrosion has similar physical and mechanical properties to Titanium CP Grade 2. Applications Chemical processing, Desalination Power generation, Industrial Standards ASME SB-338 Forms Available Tube Titanium Based Alloys Titanium Grade 5 – Titanium 6Al-4V Titanium Grade 5 alloy is the most commercially available of all titanium alloys. It offers an excellent combination of high strength and toughness. Grade 5 titanium has good welding and fabrication characteristics. Applications Aerospace, Chemical Processing, Marine, Medical Standards ASME SB-265, AMS 4911, ASME SB-348, AMS 4928, AMS 4965, AMS 4967 Forms Available Titanium Grade 6 – Titanium 5Al-2.5Sn Titanium Grade 6 alloy offers good weldability, stability and strength at elevated temperatures. Applications Aerospace Standards ASME SB-381, AMS 4966, MIL-T-9046, MIL-T-9047, ASME SB-348, AMS 4976, AMS 4956, ASME SB-265, AMS 4910, AMS 4926 Forms Available Bar, Forgings Plate, Sheet, Wire Titanium Grade 9 – Titanium 3Al-2.5V Titanium Grade 9 has medium strength that falls between Grade 4 and Grade 5. It has excellent corrosion resistance and is used in Aerospace and Industrial applications. Grade 9 Titanium can be used at higher temperatures than Grades 1 through 4. Grade 9 titanium has good cold rolling properties. Applications Aerospace, Automotive, Chemical processing, Consumer applications, Marine, Medical, Transportation Standards AMS 4943, AMS 4944, ASME SB-338 Forms Available Bar, Forgings Plate, Sheet, Wire Titanium Grade 12 – Ti-0.3-Mo-0.8Ni This Titanium Grade 12 alloy is similar to Titanium Grades 2 and 3 except that Titanium Grade 12 has 0.3% molybdenum and 0.8% nickel. This offers enhanced corrosion resistance. Applications Chemical processing, Desalination, Power generation, Industrial Standards ASME SB-338 Forms Available Tube Titanium Grade 19 – Titanium Beta C Titanium Grade 19 has very high strength and can be heat treated. It offers good resistance to stress and corrosion. Applications Aerospace Automobile Standards MIL-T-9046, MIL-T-9047, ASME SB-348, AMS 4957, AMS 4958, ASME SB-265 Titanium Grade 23 – Titanium 6Al-4V ELI Titanium Grade 23 is similar to Grade 5 but has lower oxygen, nitrogen and iron. It has better ductility and fracture toughness than Titanium Grade 5. Applications Aerospace, Chemical Processing, Marine, Medical Standards AMS 4911, AMS 4928, AMS 4930, AMS 4931, AMS 4935, AMS 4965, AMS 4967, AMS 4985, AMS 4991, MIL -T-9046, MIL -T-9047, BSTA 10,11,12, BSTA 28,56,59, DIN 3.7165, AMS 4907 ELI, AMS 4930 ELI, AMS 4956 ELI, ASTM F136 ELI, UNS R56407 Forms Available Bar, Forgings, Plate, Sheet, Welding Wire, Wire Titanium 6Al-6V-2Sn – Titanium 6-6-2 Titanium 6-2-4-2 has excellent strength, stability, and creep resistance to temperatures as high as 550 °C. Applications Gas, Turbine Compressor Engine afterburner, Aerospace Standards AMS 4919, AMS 4952, AMS 4975, DIN 3.7164, GE B50 TF22, GE B50TF21, GE B50TF22, GE C50TF7, MIL F-83142, MIL T-9046, MIL T-9047, PWA 1220, UNS R54620 Forms Available Bar, Plate, Sheet Titanium 6Al-2Sn-4Zr-2Mo – Titanium 6-2-4-2 Titanium 6Al-6V-2Sn is a two-phase, Alpha Beta Alloy. It is usually used in the annealed or solution treated and aged conditions. It’s a heat treatable, high strength alloy with lower toughness and ductility than Titanium Grade 5 (6Al-4V) and it’s difficult to weld. Cold forming of Titanium 6Al-6V-2Sn is difficult because of its high strength and the large amount of spring-back that results. This grade can be welded by the inert gas shielded, fusion welding process but the heat effected area will have less ductility and toughness than the parent material. The hardness of Titanium 6-6-2 is approximately Rockwell C 36-38. This grade is primarily used for airframe and jet engine parts, rocket engine cases and ordinance components. Please call us to determine our minimum item quantity. Applications Airframe Components, Jet Engine Parts, Ordinance Components, Rocket Engine Cases Standards AMS 4981, MIL-T-9047, Forms Available Bar, Wire Sheet, Plate, Forgings, Fittings, Flanges, Seamless Pipe, Seamless Tube, Welded Pipe, Welded Tube Titanium 6Al-2Sn-4Zr-6Mo – Titanium 6-2-4-6 Titanium 6Al-2Sn-4Zr-6Mo is an Alpha-Beta Alloy and it’s generally regarded as the workhorse alloy of the titanium industry. The alloy is fully heat-treatable in section sizes up to one inch and is used up to approximately 400°C (750°F). Since it is one of the most commonly used alloys (over 70% of all alloy grades melted are a sub-grade of Ti-6-4,) its uses span many aerospace engine and airframe components. Titanium 6Al-2Sn-4Zr-6Mo is also used in lots of non-aerospace applications such as marine, offshore and power generation industries. This Alpha-Beta Alloy combines good corrosion resistance and strength with weldability and fabricability. The alloy is generally available in bar form and it’s typically used in deep sour well applications. This alloy can be hot or cold formed. Please call us to determine our minimum item quantity. Applications Aerospace Engines, Airframe Components, Marine Applications, Offshore Applications, Power Generation Applications Standards AMS 4981 Forms Available Bar, Plate, Sheet Titanium 8Al-1Mo-1V – Titanium 8-1-1 Titanium 8Al-1Mo-1V is a near Alpha Alloy that was primarily designed for use at elevated temperatures – up to 455 degrees centigrade. It offers the highest modulus and lowest density of all Titanium alloys. It has good creep strength and it’s weldable by the inert gas fusion and resistance-welding processes. Titanium 8Al-1Mo-1V is used in the annealed condition for such applications as airframe and jet engine parts that demand high strength, superior creep resistance and a good stiffness-to-density ratio. The machinability of this grade is similar to that of Titanium 6Al-4V. Please call us to determine our minimum item quantity. Applications Airframe Parts, Jet Engine Parts Standards MIL-T-9046, MIL-T-9047, AMS 4972, AMS 4915, AMS 4973, AMS 4955, AMS 4916 Forms Available Forgings, Bar, Sheet, Plate, Strip, Extrusions, Wire Titanium 10V-2Fe-3Al Titanium 10V-2Fe-3Al is a Titanium Beta Alloy. It is harder and stronger than many titanium alloys. This Titanium is a heat treatable alloy, it’s weldable and it’s easily formed. Titanium 10V-2Fe-3Al is an all Beta Alloy and is more difficult to machine than most titanium alloys. The chief problems include flank wear, spring-back and chip control. Because of these characteristics, positive rake chip grooves in combination with light hones on the cutting edge are advantageous. Please call us to determine our minimum item quantity. Applications Airframe Components, Compressor Blades, Disks, Wheels and Spacers Standards AMS 4983, AMS 4984, AMS 4986, AMS 4987 Forms Available Bar, Forgings, Plate, Sheet, Seamless Pipe, Seamless Tube, Welded Pipe, Welded Tube, Wire Titanium 15V-3Cr-3Sn-3Al This Metastable-Beta Alloy is used primarily in sheet metal form. It is age-hardenable and highly cold-formable. Titanium 15V-3-3-3 is often used to replace hot-formed Titanium Grade 5 (6Al-4V) sheet. It can also be produced as foil and is an excellent alloy for castings. For aerospace applications, this grade is often specified as AMS 4914. Please call to determine the minimum item quantity. Applications Aerospace Tank Applications, Airframe Applications, Castings, Fasteners High Strength Hydraulic Tubing Standards AMS 4914, ASTM B265 Forms Available Sheet, Foil Titanium Alpha Alloys Commercially pure titanium and alpha alloys of titanium are non-heat treatable and have very good welding characteristics. Applications Cryogenic applications, Airplane parts, Chemical processing equipment Standards AMS 4973, AMS 4976, AMS 4924, AMS 4972, MIL-T-9047, AMS 4910, ASTM B265, GR-6 MIL-T9046, AMS 4909, AMS 4915/4916, AMS 4966, AMS 4924, AMS 4973, AMS 4933, MIL-T-81556A A-1, MIL-T-81556A A-2, MIL-T-81556A A-4 Forms Available Bar, Forgings, Plate, Sheet Extrusions Titanium Beta Alloys Titanium Beta or near Beta Alloys are: Fully heat treatable Generally weldable Capable of high strengths Possess good creep resistance up to intermediate temperatures In the solution treated condition, excellent formability can be expected from Beta Alloys Titanium Beta Alloys are ideal for sporing applications. Common Titanium Beta Alloys include: Ti3Al8V6Cr4Mo4Zr ASTM Grade 19 Ti-3Al-8V-6Cr-4Mo-4Zr AMS 4983, 4984, 4987 Ti-10V-2Fe-3Al ASTM Grade 21 Ti-15Mo-3Nb-3Al-2Si AMS 4914 Ti-15V-3Cr-3Sn-3Al The Metastable Titanium Beta Alloys are heat treatable by solution treatment and ageing. Fully stable beta alloys can only be annealed. Applications Aerospace, Standards AMS 4914, AMS 4983, AMS 4984, AMS 4987, ASTM Grade 19, ASTM Grade 21 Forms Available Forgings Titanium Alpha-Beta Alloys Titanium Alpha Beta alloys are heat treatable and most of them are also weldable. The typical properties of Titanium Alpha Beta Alloys are: Medium to high strength levels; High temperature creep strength is not as less than most alpha alloys; Limited cold forming but hot forming qualities are normally good; The most commonly used Titanium Alpha Beta Alloy is Ti 6Al-4V. Titanium 6Al-4V has been developed in many variations of the basic formulation for numerous and widely differing applications. Other Titanium Alpha Beta Alloys include: 6Al-4V-ELI 6Al-6V-2Sn 6Al-2Sn-4Zr-2Mo 3Al-2.5V 8Mn Applications Aircraft and aircraft turbine parts, Chemical processing equipment, Marine hardware, Prosthetic devices Standards ASME SB-265, AMS 4911, ASME SB-348, AMS 4928, AMS 4965, AMS 4967, AMS 4981, MIL-T-9047, AMS 4930, AMS 4971, AMS 4907, ASTM F 136, MIL-T-9046, AMS 4918, DMS1879/2237, AMS 4908, AMS 4943, ASTM B348, AMS 4975, MIL-T-9047 G, AMS 4928, BMS 7-348, DMS 1570, AMS 4976, AMS 4920, AMS 4934 Forms Available Bar, Fittings, Flanges, Forgings, Pipe, Plate, Sheet, Tube, Wire Titanium Metals Titanium Specifications Titanium Grades CP4 – Grade 1 CP3- Grade 2 Titanium CP2 – Grade 3 CP1 – Grade 4 Grade 7 Grade 11 – CP Ti-0.15Pd Grade 5 – Titanium 6Al-4V Grade 6 – Titanium 5Al-2.5Sn Grade 9 – Titanium 3Al-2.5V Grade 12 – Ti-0.3-Mo-0.8Ni Grade 19 – Titanium Beta C Grade 23 – Titanium 6Al-4V ELI 6Al-6V-2Sn 6Al-2Sn-4Zr-2Mo 6Al-2Sn-4Zr-6Mo 8Al-1Mo-1V 10V-2Fe-3Al 15V-3Cr-3Sn-3Al Alpha Alloys Beta Alloys Alpha-Beta Alloys Titanium Dioxide TiO2 Titanium Applications Titanium Sheets Titanium Plates Titanium Wire Titanium Tubes & Tubing Titanium Round Bar Titanium Pipe We stock and sell Commercially Pure Titanium and Titanium Alloys in a broad range of forms and sizes. We can deliver production quantities in 90-120 days. close Request A Quote close Home Services Industries Resources About Contact Blog RFQ Sitemap

The Outer Half Round 90 Degree Bend Tube Shield is fabricated to precisely match the outer arc of 90° tube bends. Its semi-cylindrical form conforms tightly to the external curve, forming a protective barrier that resists abrasive flow and corrosive attack. These shields are typically used in superheaters, reheaters, waste heat recovery boilers (WHRBs), and HRSGs where return bends are most vulnerable. The shields are manufactured from corrosion-resistant stainless steels and heat-resistant alloys, selected based on temperature ratings and media conditions. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of Outer Half Round 90 Degree Bend Tube Shields, offering standard and custom-engineered designs for a wide variety of boiler and heat recovery applications. Available Material Grades • Stainless Steels: SS 304, 304L, 310, 310S, 316, 316L, 410, 420, 430 • Heat-Resistant Alloys: 1Cr13, 1Cr18Ni9Ti, Cr25Ni20, 1Cr25Ni20Si2, Cr23Ni13, 1Cr20Ni14Si2, Inconel 600, and more Typical Chemical Composition (example – SS 316) • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% • Iron (Fe): Balance Applications: Used in curved tube regions where the external surface is subjected to thermal wear, ash abrasion, and corrosive gases. Uses • Protection of 90-degree U-bends in boiler and superheater tube banks • Return bend shielding in heat exchangers and WHRBs • Safeguarding curved tubes in process heaters, HRSGs, and refinery systems • Applied in thermal, petrochemical, and chemical plant steam systems • Suitable for power generation and heavy industrial boilers Features • Form-fitting design – Precisely matches outer curvature of U-bends for tight, secure installation • Heat and corrosion resistance – Manufactured from materials designed to withstand extreme thermal and chemical environments • Durable protection – Shields critical bend zones from fly ash erosion, soot-blowing wear, and gas impingement • Reduced maintenance – Prolongs tube life and minimizes unplanned outages due to bend failure • Custom-engineered – Fabricated based on user drawings, coil geometry, and tube specifications • Flexible installation – Can be clamped, welded, or banded with minimal disassembly Applications • steam power boilers – Protects outer bend regions from accelerated erosion and high-velocity flue gases • oil and gas refineries – Used in convection section return bends to enhance tube longevity • WHRB and HRSG installations – Shields bend areas exposed to intense ash loading • fertilizer and chemical processing – Ideal for curved coils in high-temperature, corrosive environments • industrial heaters – Ensures safety and long-term performance of curved tube bundles Conclusion The Outer Half Round 90 Degree Bend Tube Shield by Ladhani Metal Corporation – manufacturer, supplier, and exporter – delivers critical protection to return bends in thermal process systems. Designed for curved tube geometry, these shields reduce erosion risk, extend tube service life, and support the reliability of high-performance boilers, reformers, and heat recovery units. For custom sizing, material selection, or technical specifications, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponent

Half Round Tube Shield Ladhani Metal Corporation manufactures precision-engineered Half Round Tube Shields designed to protect straight sections of boiler and heat exchanger tubes from wear, erosion, scaling, and thermal degradation. These shields are essential in areas where tubes are exposed to high-velocity gas flow, ash impact, or corrosive atmospheres. Their half-round, semi-cylindrical structure allows secure and quick installation on straight tube surfaces without the need for disassembly or major downtime. Half Round Straight Tube Shield The Half Round Straight Tube Shield is designed specifically to protect straight runs of boiler or exchanger tubes in high-temperature, corrosive, and abrasive service environments. These shields act as a barrier between the process medium and the tube surface, reducing the risk of tube thinning, cracking, and premature failure. Fabricated from a variety of stainless steels and heat-resistant alloys, the shields are available in multiple grades to suit varying application demands . Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of Half Round Straight Tube Shields, offering customizable shielding solutions for a wide range of thermal process equipment and conditions. Available Material Grades • Stainless Steels: SS 304, 304L, 310, 310S, 316, 316L, 410, 420, 430 • Heat-Resistant Alloys: 1Cr13, 1Cr18Ni9Ti, Cr25Ni20, 1Cr25Ni20Si2, Cr23Ni13, 1Cr20Ni14Si2, Inconel 600, and others Typical Chemical Composition (example – SS 304) • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 10.5% • Iron (Fe): Balance Applications: Designed for use in systems where straight tube lengths are exposed to hot, corrosive gases, ash particles, or scaling environments. Uses • Protection of straight boiler tubes in high-temperature zones • Shielding of exchanger tubes in oil refineries and chemical plants • Surface protection in economizers, superheaters, and reheaters • Applied in Waste Heat Recovery Boilers (WHRBs) and HRSGs • Suitable for utility boilers in thermal and captive power plants Features • Corrosion-resistant – Manufactured from stainless steels and alloys suited for chemical and high-heat environments • Thermal stability – Capable of withstanding prolonged exposure to high temperatures without deformation • Wear protection – Prevents tube erosion from fly ash, flue gas, and thermal cycling • Precise fitment – Custom-bent and sized to match tube diameter and length requirements • Easy installation – Can be clamped, welded, or banded with minimal downtime • Custom options – Available in various lengths, wall thicknesses, and alloy choices Applications • thermal power plants – Protects straight tubes from scale buildup and gas impingement • petrochemical refineries – Used in process heaters and tube exchangers to combat high-temperature corrosion • WHRB systems – Applied in exhaust zones to preserve tube integrity • chemical processing units – Offers reliable protection in corrosive steam and flue environments • pulp and paper industry – Shields recovery boiler tubes from ash erosion and chemical attack Conclusion The Half Round Straight Tube Shield by Ladhani Metal Corporation – manufacturer, supplier, and exporter – provides robust protection for straight tube sections in boilers, heat exchangers, and process heaters. With a range of alloy options and custom-fit configurations, these shields enhance the durability and efficiency of heat transfer systems operating in corrosive, abrasive, or high-thermal-stress environments. For technical guidance, size customization, or pricing, contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are engineered to provide robust protection for boiler, superheater, and heat exchanger tubes against high-temperature erosion, slag deposition, scaling, and corrosive gas exposure. These shields are essential in power plants, petrochemical systems, and high-heat industrial environments where tubes are vulnerable to rapid degradation due to thermal cycling and particulate flow. The half-round design ensures quick installation over curved or straight tube sections without system disassembly. U Type Inner Half Round Tube Shield The U Type Inner Half Round Tube Shield is specially designed to protect the inner curvature of U-bend tubes, which often experiences high levels of turbulence, localized corrosion, and scaling due to gas redirection and mechanical stress. Inner shields are commonly paired with outer shields for full bend protection and are manufactured in a wide range of stainless steel and high-temperature alloy grades, customized to specific environmental and system requirements. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of U Type Inner Half Round Tube Shields in various material grades, offering tailored protection solutions for high-temperature and corrosive conditions across multiple industries. Available Grades • SS 304 – General-use stainless steel with good corrosion and heat resistance • SS 304L – Low-carbon version for improved weldability and reduced carbide precipitation • SS 316 – Molybdenum-added alloy with excellent resistance to pitting and chlorides • SS 316L – Low-carbon alternative for superior corrosion resistance in welded environments • SS 310 – Austenitic high-temperature steel with excellent oxidation resistance • SS 310S – Low-carbon SS 310 for better thermal fatigue performance • SS 410 – Martensitic stainless steel with good strength and abrasion resistance • SS 420 – High-hardness martensitic grade ideal for erosion-prone zones • SS 430 – Ferritic grade for moderate corrosion and oxidation resistance • 1Cr13 – Martensitic stainless steel offering mechanical protection and heat resistance • 1Cr18Ni9Ti – Titanium-stabilized grade offering resistance to intergranular corrosion • Cr23Ni13 – High-temperature alloy with excellent oxidation and scaling resistance • Cr25Ni20 – High-performance grade for extreme thermal and oxidizing conditions • 1Cr25Ni20Si2 – Heat-resistant alloy with silicon for improved scale resistance • 1Cr20Ni14Si2 – Alloy for thermal fatigue protection and oxidizing environments Applications • Inner arc protection in U-bend tubes of boilers, superheaters, and reheaters • Shielding internal curves of tubes in waste heat recovery boilers (WHRBs) and HRSGs • Corrosion and scale defense for inner tube arcs in petrochemical and steam reforming units • Inner surface protection in furnace coils, reformers, and incinerators • Installed in chemical plants and thermal systems prone to turbulent flue gas exposure Features • Focused inner arc protection – Guards the most corrosion- and scale-prone surface of U-bend tubes • Material flexibility – Available in multiple grades for varied thermal, mechanical, and chemical requirements • Excellent thermal resistance – Withstands extreme temperatures depending on material (up to 1150°C+) • Precise fit – Custom-fabricated to match exact tube dimensions and bend radii • Simple installation – Mounted using clamps, stainless bands, or welding techniques • Dual-shield pairing – Can be combined with outer shields for complete U-bend coverage • Long-lasting performance – Enhances tube reliability and reduces maintenance in high-wear zones Applications • power generation – Protects U-bend inner surfaces in superheaters and economizers from flue gas turbulence • petrochemical plants – Shields inside arcs in reformers and heaters exposed to chlorides and acidic gases • waste heat systems – Installed in HRSGs and WHRBs to prevent slag and oxidation on internal bends • chemical industries – Suitable for reactors and high-temperature exchangers handling corrosive media • cement and metallurgy – Used in systems exposed to flame, dust, and oxidizing atmospheres Conclusion The U Type Inner Half Round Tube Shield by Ladhani Metal Corporation – manufacturer, supplier, and exporter – is a precision-engineered solution for protecting the inner arc of U-bend tubes against corrosion, scale formation, and thermal damage. Available in a wide range of stainless steels and high-temperature alloys, these shields provide durable, customizable, and easy-to-install protection for critical components in power, chemical, and thermal processing systems. For custom sizes, technical assistance, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are essential components engineered to protect boiler, superheater, reheater, and heat exchanger tubes from high-temperature damage, erosion, slag buildup, and corrosion. These shields are commonly used in thermal power plants, petrochemical systems, waste heat recovery units, and high-temperature industrial processes where curved tube sections are frequently exposed to hot flue gases and particulate-laden flow. The half-round shape ensures quick installation and effective protection without dismantling the tube system. U Type Outer Half Round Tube Shield The U type outer half round tube shield is specifically designed to cover and protect the outer arc of U-bend tubes — the area most vulnerable to heat, gas erosion, flame impingement, and slag accumulation. These shields are manufactured in a wide variety of stainless steel and heat-resistant alloy grades to meet specific temperature, corrosion, and wear resistance requirements across various industries. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of U type outer half round tube shields in a full range of grades, offering precise fitment, durability, and reliable protection for curved tubes operating in extreme service environments. Available Grades • SS 304 – General-purpose stainless steel with good resistance to oxidation and moderate corrosion • SS 304L – Low-carbon version of SS 304 for better weldability and intergranular corrosion resistance • SS 316 – Molybdenum-enhanced alloy for superior resistance to chloride pitting and chemical corrosion • SS 316L – Low-carbon variant of SS 316 for enhanced corrosion resistance in welded conditions • SS 310 – High-temperature austenitic stainless steel with excellent oxidation resistance • SS 310S – Low-carbon SS 310 version suitable for thermal cycling and stress-resistance • SS 410 – Martensitic stainless steel with good mechanical strength and wear resistance • SS 420 – High-hardness martensitic steel for erosion-prone environments • SS 430 – Ferritic stainless steel suitable for mild oxidizing conditions and cost-effective applications • 1Cr13 – Martensitic stainless steel ideal for mechanical protection and moderate corrosion resistance • 1Cr18Ni9Ti – Titanium-stabilized alloy resistant to intergranular corrosion and heat stress • Cr23Ni13 – Austenitic heat-resistant alloy with excellent scaling and oxidation resistance • Cr25Ni20 – High-alloy grade for extreme heat and corrosive gas exposure • 1Cr25Ni20Si2 – Silicon-enhanced alloy for high-temperature stability and anti-scaling performance • 1Cr20Ni14Si2 – High-temperature grade with superior thermal fatigue and oxidation resistance Applications • Protection of U-bend outer arcs in superheaters and reheaters of thermal power plants • Shielding of curved tube sections in waste heat recovery boilers (WHRBs) and HRSGs • Flame-side defense for tube bends in petrochemical heaters, steam reformers, and exchangers • Slag and soot protection in return bends of industrial furnaces, incinerators, and kilns • Coverage for U-bend tubes in chemical and refinery plants exposed to acidic or oxidizing gases Features • Full outer arc coverage – Shields the most heat-exposed and erosion-prone section of U-bend tubes • Grade versatility – Available in multiple material options for specific temperature and corrosion demands • Excellent heat and oxidation resistance – Performance stability in conditions up to 1100°C+ depending on grade • Precision fitment – Custom-manufactured to match tube diameter, radius, and system design • Easy to install – Mountable via stainless steel bands, clamps, or tack welds without disassembly • Long-lasting durability – Reduces frequency of tube failure, improving system efficiency and safety Conclusion The U Type Outer Half Round Tube Shield by Ladhani Metal Corporation—manufacturer, supplier, and exporter—is available in a complete range of stainless steel and heat-resistant alloy grades to suit any industrial application. These shields provide robust, reliable protection for the outer arc of U-bend tubes exposed to high temperatures, corrosive gases, and erosive flows. With grade-specific performance, precision fabrication, and simple installation, they are a proven solution for extending tube service life in critical systems. For technical support, customized dimensions, or quotations, please contact Ladhani Metal Corporation.

DIN 2573 Titanium Flanges PN 6 are lightweight, corrosion-resistant plate flanges manufactured to DIN 2573 standards, specifically designed for low-pressure industrial and chemical applications. Fabricated from premium-grade titanium, these flanges are known for their exceptional strength-to-weight ratio, biocompatibility, and superior corrosion resistance, especially in aggressive environments involving chlorides, seawater, and oxidizing agents. DIN 2573 titanium flanges are ideal for critical applications across industries such as chemical processing, desalination, offshore engineering, medical systems, and aerospace. Ladhani Metal Corporation is a trusted supplier and exporter of precision-engineered titanium flanges, delivering products that meet stringent global quality standards. The DIN 2573 design, combined with the inherent material advantages of titanium, ensures long-lasting performance and ease of integration in low-pressure piping systems. Pressure Rating: • PN 6 (6 bar / 87 psi): Suitable for low-pressure pipelines and systems where outstanding corrosion resistance and long service life are essential, even under chemically aggressive or saline conditions. Flange Types: • Plate Flanges Standard flat flanges designed for bolted connections with gasket sealing, suitable for low-pressure service. • Flat Face (FF) Flanges Ensures full contact with mating flanges or non-metallic components to prevent stress cracking or uneven loading. • Slip-On Flanges Allow for easy alignment and welding, widely used in systems where frequent maintenance or disassembly is required. • Custom-Machined Flanges Available in custom sizes, dimensions, and titanium grades to suit specific project or industry needs. Titanium Grades and Composition: 1. Grade 2 (Commercially Pure Titanium) Composition: • Titanium (Ti): ≥ 99.2% • Iron (Fe): ≤ 0.30% • Oxygen (O): ≤ 0.25% • Carbon (C): ≤ 0.08% • Nitrogen (N): ≤ 0.03% • Hydrogen (H): ≤ 0.015% Applications: Used in desalination plants, chemical handling, marine equipment, and medical fluid systems due to its excellent formability, corrosion resistance, and biocompatibility. 2. Grade 5 (Ti-6Al-4V – Titanium Alloy) Composition: • Titanium (Ti): Balance • Aluminum (Al): 5.5 – 6.75% • Vanadium (V): 3.5 – 4.5% • Iron (Fe): ≤ 0.40% • Oxygen (O): ≤ 0.20% Applications: Preferred in aerospace, high-performance marine, and industrial applications requiring superior mechanical strength, wear resistance, and corrosion protection. Applications of DIN 2573 Titanium Flanges: • Chemical and Petrochemical Plants: Ideal for conveying aggressive acids, chlorides, and alkalis in low-pressure systems. • Desalination and Marine Systems: Exceptional resistance to seawater corrosion makes them suitable for brine, saltwater, and offshore structures. • Medical and Pharmaceutical Equipment: Non-toxic and biocompatible properties support sterile piping systems for fluids and gases. • Aerospace and Defense: Lightweight and high-strength material enhances performance in low-pressure structural and fuel systems. Key Features: • Manufactured according to DIN 2573 specifications • Designed for PN 6 low-pressure applications • Superior corrosion resistance in marine and chemical environments • Lightweight with high structural strength • Suitable for welding, pickling, passivation, and surface customization • Available in Grade 2, Grade 5, and other titanium alloys Conclusion: DIN 2573 Titanium Flanges PN 6 by Ladhani Metal Corporation offer a high-performance, corrosion-resistant solution for low-pressure systems exposed to harsh environments. With excellent mechanical properties and unmatched longevity, these titanium flanges serve critical roles in chemical, marine, medical, and water treatment industries. For detailed specifications, custom sizes, or material selection assistance, contact Ladhani Metal Corporation.

DIN 2573 Stainless Steel Flanges PN 6 are precision-manufactured flat flanges made from high-grade stainless steel, designed for low-pressure applications across a broad range of industrial sectors. Compliant with DIN 2573 standards, these flanges provide excellent corrosion resistance, mechanical reliability, and compatibility with standard piping systems. They are commonly used in non-critical, low-pressure environments in industries such as water treatment, HVAC, food processing, and general utility piping systems. Ladhani Metal Corporation is a reputable manufacturer and exporter of stainless steel flanges, offering components that adhere to international quality benchmarks. The flat flange design simplifies assembly and disassembly, making these flanges a practical choice for systems requiring easy maintenance and reliable sealing at lower pressure ranges. Pressure Rating: • PN 6 (6 bar / 87 psi): Engineered for low-pressure systems where moderate sealing performance and corrosion resistance are essential. Flange Types: • Plate Flanges Used in low-pressure piping systems for simple bolted connections with gaskets. • Flat Face (FF) Flanges Ideal for use with cast iron equipment or non-metallic gaskets to ensure uniform surface contact. • Slip-On Flanges Designed for ease of installation by sliding over the pipe and welding both sides for moderate sealing. • Custom-Machined Flanges Available in specific dimensions and stainless steel grades as per customer specifications and operational requirements. Stainless Steel Grades and Composition: 1. 304 (Austenitic Stainless Steel) Composition: • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 11.0% Applications: Used in water supply lines, food-grade piping, and low-pressure process lines due to its hygienic properties and corrosion resistance. 2. 316 (Molybdenum-Alloyed Stainless Steel) Composition: • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% Applications: Suited for mildly corrosive environments including water filtration systems and food-grade tanks. 3. 321 (Titanium-Stabilized Stainless Steel) Composition: • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 17.0 – 19.0% • Nickel (Ni): 9.0 – 12.0% • Titanium (Ti): ≥ 5x(C+N) Applications: Applicable in moderately high temperatures or where intergranular corrosion resistance is important, such as thermal pipelines and heating systems. Applications of DIN 2573 Stainless Steel Flanges: • Water Distribution and Treatment Systems: Used in potable and waste water systems, ensuring non-reactive and rust-resistant performance. • HVAC and Building Installations: Employed in air ducts, chilled water lines, and other HVAC components where low-pressure performance is sufficient. • Food and Beverage Processing: Chosen for hygienic piping setups in non-pressurized fluid transfer applications. • Industrial Utility Lines: Integrated into auxiliary piping systems for lubricants, cooling water, and drainage. • Agricultural and Irrigation Systems: Used in low-pressure pumping and irrigation lines due to their corrosion resistance and ease of installation. Key Features: • Manufactured in compliance with DIN 2573 standard • PN 6 pressure rating suitable for non-critical systems • Excellent corrosion resistance with hygienic surface options • Flat and slip-on configurations for simplified assembly • Available in 304, 316, 321, and other stainless steel grades Conclusion: DIN 2573 Stainless Steel Flanges PN 6 by Ladhani Metal Corporation offer a cost-effective and reliable solution for low-pressure applications. Their corrosion-resistant material, ease of installation, and compliance with international standards make them ideal for various general-purpose industrial systems. For tailored configurations, specific material grades, or technical support, contact Ladhani Metal Corporation.

DIN 2568 Monel Flanges PN 64 are high-integrity threaded flanges manufactured from corrosion-resistant Monel alloys, designed to perform reliably under high pressure and in highly corrosive environments. Built in accordance with DIN 2568 standards, these flanges offer outstanding resistance to seawater, acids, and alkalis, while maintaining high mechanical strength and thermal stability. They are ideally suited for use in marine, chemical, oil and gas, and offshore applications where both durability and corrosion performance are critical. Ladhani Metal Corporation is a recognized manufacturer and exporter of Monel flanges, offering components that conform to global industry specifications. The threaded design facilitates easy, weld-free installation and disassembly, making them ideal for systems requiring frequent maintenance or rapid assembly in corrosive environments. Pressure Rating: • PN 64 (64 bar / 928 psi): Specially engineered for high-pressure systems exposed to aggressive chemical environments, ensuring mechanical integrity and long service life. Flange Types: • Threaded (Screwed) Flanges Enable efficient, non-welded installation and maintenance in high-corrosion environments. • Raised Face (RF) Flanges Improve gasket sealing performance in systems with pressure and temperature variations. • Flat Face (FF) Flanges Suited for connections with flat-faced components, ensuring uniform gasket load distribution. • Forged Threaded Flanges Provide enhanced strength, dimensional precision, and resistance to corrosion. • Custom-Machined Flanges Available in a variety of sizes, pressure ratings, and Monel grades to suit specific application needs. Available Monel Grades and Composition: 1. Monel 400 (UNS N04400) Composition: • Nickel (Ni): ≥ 63.0% • Copper (Cu): 28.0 – 34.0% • Iron (Fe): 2.0 – 2.5% • Manganese (Mn): ≤ 2.0% Applications: Commonly used in marine engineering, chemical processing, and hydrocarbon systems for its excellent resistance to saltwater, hydrofluoric acid, and stress corrosion cracking. 2. Monel K500 (UNS N05500) Composition: • Nickel (Ni): ≥ 63.0% • Copper (Cu): 27.0 – 33.0% • Aluminum (Al): 2.3 – 3.15% • Titanium (Ti): 0.35 – 0.85% Applications: Ideal for high-strength applications such as pump shafts, marine fasteners, and heat exchangers, combining the corrosion resistance of Monel 400 with increased hardness and tensile strength. Applications of DIN 2568 Monel Flanges: • Marine and Offshore Systems Used in seawater piping, ballast systems, and marine heat exchangers. • Chemical and Petrochemical Plants Resistant to acidic and alkaline media in processing plants and reactors. • Oil and Gas Industry Applied in sour gas service, separators, and wellhead systems. • Power Generation Installed in condensers, boilers, and cooling systems exposed to aggressive fluids. • Aerospace and Heat Treatment Suitable for exhaust systems, fixtures, and salt bath environments. Key Features: • Conforms to DIN 2568 standard • Rated for PN 64 high-pressure service • Exceptional resistance to seawater, acids, and alkalis • High strength, ductility, and fatigue resistance • Threaded design allows for fast, weld-free installation and disassembly • Supplied with test certificates, material traceability, and quality documentation • Available with custom machining, finishing, and dimensional options Conclusion: DIN 2568 Monel Flanges PN 64 from Ladhani Metal Corporation offer an optimal solution for high-pressure systems operating in chemically aggressive or marine environments. With superior mechanical performance and corrosion resistance, Monel 400 and K500 flanges provide long-lasting service life in demanding applications. For technical support, grade selection, or custom orders, contact Ladhani Metal Corporation today

DIN 2568 Inconel Flanges PN 64 are precision-engineered threaded flanges made from high-strength Inconel alloys, designed for reliable operation in high-pressure, high-temperature, and corrosive environments. Manufactured in accordance with DIN 2568 standards, these flanges are ideal for use in critical industries such as aerospace, chemical processing, marine, nuclear, and high-temperature power generation, where resistance to oxidation, corrosion, and thermal fatigue is essential. Ladhani Metal Corporation is a trusted manufacturer and exporter of Inconel flanges, offering components that adhere to the highest international quality and dimensional standards. The threaded design allows for quick, weld-free installation and removal, making these flanges highly suitable for systems requiring regular maintenance or disassembly. Pressure Rating: • PN 64 (64 bar / 928 psi): Engineered for high-pressure applications where material performance under extreme conditions is crucial. Flange Types: • Threaded (Screwed) Flanges Provide efficient, weld-free assembly, ideal for pressure systems requiring ease of maintenance. • Raised Face (RF) Flanges Enhance sealing under high pressure and temperature using focused gasket compression. • Flat Face (FF) Flanges Used for even surface contact with flat-faced components, particularly when working with brittle or non-metallic materials. • Forged Threaded Flanges Offer improved mechanical strength, resistance to thermal fatigue, and precise dimensional control. • Custom-Machined Flanges Available in various Inconel grades, dimensions, and configurations as per project requirements. Available Inconel Grades and Composition: 1. Inconel 600 (UNS N06600) • Nickel (Ni): ≥ 72.0% • Chromium (Cr): 14.0 – 17.0% • Iron (Fe): 6.0 – 10.0% Applications: Used in chemical processing, heat-treating equipment, and nuclear reactors due to its excellent resistance to oxidation and carburization at elevated temperatures. 2. Inconel 625 (UNS N06625) • Nickel (Ni): ≥ 58.0% • Chromium (Cr): 20.0 – 23.0% • Molybdenum (Mo): 8.0 – 10.0% • Niobium (Nb): 3.15 – 4.15% Applications: Suitable for marine, aerospace, and chemical environments where superior strength, fatigue resistance, and protection from pitting and chloride-induced corrosion are required. 3. Inconel 718 (UNS N07718) • Nickel (Ni): 50.0 – 55.0% • Chromium (Cr): 17.0 – 21.0% • Iron (Fe): Balance • Niobium (Nb) + Tantalum (Ta): 4.75 – 5.50% • Molybdenum (Mo): 2.80 – 3.30% Applications: Preferred for aerospace, high-speed turbines, and cryogenic systems due to its high tensile strength, creep resistance, and performance across a wide temperature range from cryogenic to over 700°C. Applications of DIN 2568 Inconel Flanges: • Aerospace and Jet Engine Components Used in high-temperature exhaust, combustion, and structural parts. • Chemical and Petrochemical Processing Ideal for vessels, piping, and heat exchangers handling aggressive acids and solvents. • Marine and Offshore Environments Resistant to seawater corrosion and mechanical wear in subsea and shipboard systems. • Nuclear and Power Generation Suitable for steam generators, fuel handling systems, and reactor components. • High-Temperature Industrial Systems Used in furnace systems, heat-treatment fixtures, and thermal reactors. Key Features: • Conforms to DIN 2568 standard • Rated for PN 64 high-pressure service • Excellent resistance to corrosion, oxidation, and thermal fatigue • High mechanical strength and performance across wide temperature ranges • Threaded design enables non-welded, fast installation and disassembly • Available with test certificates, MTCs, and full traceability • Custom machining, surface treatment, and heat-resistance options available Conclusion: DIN 2568 Inconel Flanges PN 64 from Ladhani Metal Corporation are engineered for durability and precision in high-stress, high-temperature, and corrosive environments. Available in Inconel 600, 625, and 718, these flanges provide industry-leading strength, corrosion resistance, and reliability for the most critical applications. For tailored specifications, technical support, or consultation, contact Ladhani Metal Corporation today.