DIN 2627 Carbon Steel flanges PN 400 are high-strength blind flanges designed for use in high-pressure applications across a wide range of industrial systems. Manufactured in accordance with the DIN 2627 standard, these flanges are primarily used to isolate piping systems by sealing off the end of a pipeline or vessel opening. The PN 400 pressure rating (400 bar / 5800 psi) ensures reliable performance under intense pressure and mechanical stress. Carbon steel flanges offer excellent tensile strength, impact resistance, and structural integrity, making them a cost-effective solution for systems where corrosion resistance is not the primary concern. Typically used in applications involving water, steam, oil, and gas, DIN 2627 carbon steel blind flanges are well-suited for power plants, refineries, petrochemical facilities, and general industrial systems. Ladhani Metal Corporation is a trusted global manufacturer and exporter of carbon steel flanges, producing components that meet rigorous international standards for material quality, dimensional accuracy, and pressure containment. Pressure Rating: • PN 400 (400 bar / 5800 psi): Suitable for extremely high-pressure systems in industrial pipelines and mechanical installations. Flange Type: • Blind Flanges Solid, non-bored flanges used to terminate flow or provide system isolation. Commonly used for pressure testing, maintenance access, and future expansion. • Flat Face (FF) Flanges Flat sealing surfaces designed for use with full-face gaskets and flat-faced mating flanges. Promotes even bolt loading and effective sealing under high-pressure conditions. Carbon Steel Grades and Composition: ASTM A105 (Forged Carbon Steel) • Carbon (C): ≤ 0.35% • Manganese (Mn): 0.60 – 1.05% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.040% • Silicon (Si): 0.10 – 0.35% Applications: Commonly used for high-temperature and high-pressure systems. Ideal for oil and gas, steam, and hydraulic systems. ASTM A350 LF2 (Low-Temperature Carbon Steel) • Carbon (C): ≤ 0.30% • Manganese (Mn): 0.60 – 1.35% • Silicon (Si): 0.15 – 0.30% • Nickel (Ni): ≤ 1.0% Applications: Suitable for sub-zero temperature services such as cryogenic systems, LNG processing, and cold-weather pipelines. Applications of DIN 2627 Carbon Steel Flanges PN 400: • Oil and Gas Transmission Lines Used in pipeline systems and refineries handling hydrocarbons under high pressure. • Steam and Power Generation Plants Ideal for high-pressure steam lines, condensate systems, and boiler feedwater applications. • Petrochemical and Chemical Industries Suitable for handling neutral and non-aggressive chemical fluids and process gases. • Water Treatment and Pumping Stations Used in high-pressure water systems, including pumping stations, pressure regulators, and testing units. • Heating, Ventilation, and Air Conditioning (HVAC) Employed in high-pressure chilled water and steam systems for industrial facilities. • General Manufacturing and Engineering Systems Reliable for structural piping systems in factories and mechanical installations. Key Features: • Compliant with DIN 2627 specifications • PN 400 pressure rating for ultra-high-pressure systems • Blind flange design allows for system isolation and pressure containment • Flat face design compatible with full-face gaskets and flat mating surfaces • Manufactured from forged carbon steels like ASTM A105 and A350 LF2 • Excellent strength, ductility, and impact resistance • Economical and durable for non-corrosive environments • Widely used across oil and gas, power, chemical, and water treatment sectors • Custom sizes, pressure classes, surface coatings, and face types available upon request Conclusion: DIN 2627 Carbon Steel Flanges PN 400 from Ladhani Metal Corporation are engineered for high-performance applications requiring strength, pressure retention, and reliability in demanding industrial environments. Whether used in power plants, oil pipelines, or steam systems, these flanges provide durable and cost-effective sealing for critical operations. Contact Ladhani Metal Corporation for product specifications, technical support, or custom solutions tailored to your piping system requirements.

DIN 2627 Super Duplex Steel flanges PN 400 are robust, high-performance blind flanges engineered for extremely demanding applications requiring exceptional strength, corrosion resistance, and reliability under ultra-high-pressure conditions. Designed according to the DIN 2627 standard, these flanges are primarily used to isolate sections of piping systems, especially in environments that involve aggressive media such as seawater, acidic chemicals, and high-temperature fluids. With a PN 400 pressure rating (400 bar / 5800 psi), these flanges are suitable for critical systems where both mechanical strength and corrosion resistance are vital. Ladhani Metal Corporation is a globally recognized supplier and exporter of Super Duplex DIN flanges, offering products that meet or exceed international quality, safety, and performance standards for extreme-service applications. Pressure Rating: • PN 400 (400 bar / 5800 psi): Designed for high-pressure operations in chemically aggressive and mechanically demanding environments. Flange Type: • Blind Flanges Flat, solid flanges without a bore used to seal the end of piping systems. Ideal for temporary shutdowns, pressure testing, or future system expansion. • Flat Face (FF) Flanges Feature a flat sealing surface, suitable for use with full-face gaskets and flat mating components to ensure consistent and effective sealing under pressure. Super Duplex Steel Grades and Composition: Super Duplex 2507 (UNS S32750) • Chromium (Cr): 24 – 26% • Nickel (Ni): 6 – 8% • Molybdenum (Mo): 3 – 5% • Nitrogen (N): 0.24 – 0.32% • Iron (Fe): Balance Applications: Exceptional corrosion resistance in seawater, brines, and acidic environments. Commonly used in offshore structures, desalination plants, and chemical processing systems. Applications of DIN 2627 Super Duplex Flanges PN 400: • Offshore Oil and Gas Platforms Used in topside and subsea installations exposed to high salinity, pressure, and harsh chemical environments. • Desalination and Water Treatment Plants Resistant to chloride-induced corrosion and fouling in seawater intake and brine discharge systems. • Chemical and Petrochemical Processing Ideal for aggressive process media such as chlorides, sulfur compounds, and acids at high temperatures and pressures. • Marine Engineering and Shipbuilding Excellent corrosion resistance in marine atmospheres, making them suitable for seawater cooling, ballast systems, and structural piping. • Pulp and Paper Industry Deployed in bleaching plants and alkaline recovery lines where strength and corrosion resistance are essential. • Power Generation and Nuclear Facilities Reliable under high-temperature and pressure cycles in superheated steam, feedwater, and condenser systems. Key Features: • Manufactured to DIN 2627 standard • PN 400 pressure class for ultra-high-pressure environments • Blind flange design for secure pipe end sealing or access closure • Flat face type for even gasket compression and leak-free performance • Available in Super Duplex 2507 (UNS S32750) and S32760 • Excellent resistance to pitting, crevice corrosion, and stress corrosion cracking • Twice the strength of conventional stainless steels • Widely used in offshore, marine, petrochemical, and water treatment industries • Custom options available: sizes, pressure ratings, face types, and finishes Conclusion: DIN 2627 Super Duplex Steel Flanges PN 400 by Ladhani Metal Corporation are designed to withstand the harshest industrial environments, providing unmatched corrosion resistance, mechanical strength, and sealing reliability. These flanges are ideal for mission-critical applications in offshore, marine, chemical, and energy industries. For technical assistance, custom fabrication, or detailed product specifications, contact Ladhani Metal Corporation and ensure your systems are protected by industry-leading flange solutions.

DIN 2627 Duplex Steel flanges PN 400 are high-integrity blind flanges engineered for ultra-high-pressure systems where enhanced corrosion resistance, mechanical strength, and stress corrosion cracking resistance are crucial. These flanges are manufactured in compliance with the DIN 2627 standard and are used to seal the ends of piping systems operating under extreme conditions involving high pressure, temperature fluctuations, and aggressive media such as chlorides or acidic compounds. The PN 400 rating (400 bar / 5800 psi) ensures these flanges are suitable for the most demanding environments. Made from Duplex and Super Duplex stainless steels—such as Duplex 2205 (UNS S31803/S32205) and Super Duplex 2507 (UNS S32750)—they offer a unique combination of austenitic and ferritic microstructures, providing exceptional resistance to pitting, crevice corrosion, and stress corrosion cracking. Pressure Rating: • PN 400 (400 bar / 5800 psi): Designed for use in high-pressure systems where superior strength and corrosion resistance are required. Flange Type: • Blind Flanges Flat, solid flanges without a bore, used to seal off pipeline ends or nozzles for isolation, pressure testing, or future expansion. • Flat Face (FF) Flanges Feature a flat sealing surface suitable for use with full-face gaskets and flat-faced mating components to ensure uniform sealing under high-pressure conditions. Duplex Steel Grades and Composition: Duplex 2205 (UNS S31803 / S32205) • Chromium (Cr): 21 – 23% • Nickel (Ni): 4.5 – 6.5% • Molybdenum (Mo): 2.5 – 3.5% • Nitrogen (N): 0.08 – 0.2% • Iron (Fe): Balance Applications: High strength and excellent resistance to chloride-induced stress corrosion and pitting. Commonly used in chemical tanks, pipelines, and pressure vessels. Applications of DIN 2627 Duplex Steel Flanges PN 400: • Offshore and Subsea Oil & Gas Installations Withstand high pressure, chloride-rich environments, and dynamic loading in risers, manifolds, and subsea pipelines. • Desalination Plants and Seawater Systems Exceptional resistance to chloride-induced corrosion makes them ideal for seawater intake and brine discharge lines. • Chemical and Petrochemical Plants Used in corrosive process lines involving acids, solvents, and high-temperature hydrocarbons. • Pulp and Paper Industry Ideal for chemical recovery systems and chlorine dioxide bleaching where both corrosion and strength are essential. • Heat Exchangers and Pressure Vessels High strength and thermal fatigue resistance under cyclic temperature and pressure changes. • Power Generation and Nuclear Systems Effective in high-pressure steam and cooling systems where corrosion resistance and mechanical integrity are mandatory. Key Features: • Compliant with DIN 2627 specifications • PN 400 pressure rating for ultra-high-pressure applications • Blind flange configuration ensures secure system isolation • Flat face design supports full-face gasket usage for optimal sealing • Available in Duplex 2205 and Super Duplex 2507 • Excellent resistance to pitting, crevice corrosion, and stress corrosion cracking • High mechanical strength with good weldability and fatigue resistance • Used across offshore, petrochemical, desalination, and energy sectors • Custom dimensions, materials, and finishes available upon request Conclusion: DIN 2627 Duplex Steel Flanges PN 400 from Ladhani Metal Corporation deliver unmatched reliability and performance in the harshest operating conditions. Whether used in high-pressure offshore pipelines or corrosive chemical systems, these flanges offer long-term sealing, structural integrity, and corrosion resistance. Reach out to Ladhani Metal Corporation for technical assistance, material selection, or customized Duplex flange solutions tailored to your operational demands.

DIN 2627 Monel flanges PN 400 are high-performance blind flanges crafted for ultra-high-pressure systems where superior corrosion resistance, durability, and structural integrity are critical. Compliant with the DIN 2627 standard, these flanges are specifically designed to close off the ends of pipelines in extreme service environments, including highly corrosive marine atmospheres, acidic and alkaline chemical processes, and high-temperature applications. With a PN 400 rating (400 bar / 5800 psi), these flanges ensure leak-free operation under intense pressure and challenging conditions. Made from Monel alloys—primarily Monel 400 and Monel K500—these flanges are widely utilized in offshore oil rigs, naval applications, chemical processing, and power generation systems. Ladhani Metal Corporation is a global leader in manufacturing and exporting DIN-standard Monel flanges, ensuring compliance with international requirements for pressure containment, corrosion resistance, and metallurgical consistency. Pressure Rating: • PN 400 (400 bar / 5800 psi): Engineered for extremely high-pressure piping systems in critical and hazardous service environments where reliable sealing is essential. Flange Type: • Blind Flanges Solid, non-bored flanges used to seal piping systems or terminate flow paths. Ideal for pressure testing, system isolation, and future expansion. • Flat Face (FF) Flanges Designed with a flat sealing surface for use with full-face gaskets and flat mating components. Ensures uniform load distribution and optimal sealing performance. Monel Grades and Composition: Monel 400 (UNS N04400) • Nickel (Ni): ≥ 63% • Copper (Cu): 28 – 34% • Iron (Fe): ≤ 2.5% • Manganese (Mn): ≤ 2% • Silicon (Si): ≤ 0.5% • Carbon (C): ≤ 0.3% Applications: Outstanding resistance to seawater, hydrofluoric acid, alkalis, and other corrosive media. Widely used in marine equipment, chemical processing, and heat exchangers. Monel K500 (UNS N05500) • Nickel (Ni): ≥ 63% • Copper (Cu): 27 – 33% • Aluminum (Al): 2.3 – 3.15% • Titanium (Ti): 0.35 – 0.85% • Iron (Fe): ≤ 2% • Carbon (C): ≤ 0.25% Applications: Combines the corrosion resistance of Monel 400 with enhanced strength and hardness. Suitable for high-stress components like shafts, valve parts, and pump systems in corrosive environments. Applications of DIN 2627 Monel Flanges PN 400: • Offshore Oil and Gas Platforms Ideal for subsea systems exposed to high salinity, pressure, and corrosive gases such as hydrogen sulfide. • Marine and Shipbuilding Preferred in piping systems, ballast lines, and propulsion equipment exposed to seawater and biofouling agents. • Chemical and Petrochemical Plants Used in process systems handling caustic solutions, hydrofluoric acid, and strong alkalis at elevated pressures. • Heat Exchangers and Condensers Excellent thermal conductivity and corrosion resistance make Monel suitable for harsh thermal cycling conditions. • Nuclear and Power Generation Resilient in high-radiation and chemical-laden environments found in cooling systems and high-pressure steam lines. • Aerospace and Defense Used in fuel and hydraulic lines where strength and resistance to high-pressure corrosive media are critical. Key Features: • Manufactured according to DIN 2627 standards • Rated for PN 400 high-pressure operations • Blind flange design ensures reliable sealing and flow isolation • Flat face configuration for full-face gasket compatibility • Available in Monel 400 and Monel K500 grades • Exceptional resistance to corrosion by seawater, acids, and alkalis • High strength and durability in extreme service environments • Widely used in marine, chemical, nuclear, oil and gas, and aerospace industries • Custom configurations, sizes, and material options available on request Conclusion: DIN 2627 Monel Flanges PN 400 from Ladhani Metal Corporation are engineered for mission-critical applications where long-term durability, corrosion resistance, and high-pressure performance are mandatory. Whether you need protection against seawater, alkalis, or aggressive process chemicals, these flanges provide robust, leak-free service in the harshest operating environments. Contact Ladhani Metal Corporation for expert guidance, custom engineering, and dependable supply of Monel flange solutions tailored to your specific needs

DIN 2627 Inconel flanges PN 400 are premium-grade blind flanges engineered for ultra-high-pressure applications requiring exceptional corrosion resistance, heat resistance, and mechanical strength. Manufactured in accordance with the DIN 2627 standard, these flanges are designed to seal off the ends of piping systems, especially in extreme environments involving high temperatures, aggressive chemicals, or seawater exposure. The PN 400 rating (400 bar / 5800 psi) ensures performance under intense pressure conditions. Produced using high-performance nickel-based alloys such as Inconel 600, Inconel 625, and Inconel 718, these flanges are used extensively in aerospace, chemical processing, offshore oil and gas, marine, and power generation industries. Ladhani Metal Corporation is a leading global manufacturer and exporter of Inconel flanges, supplying components that conform to international standards for material integrity, pressure containment, and corrosion resistance. Pressure Rating: • PN 400 (400 bar / 5800 psi): Suitable for high-pressure piping systems in critical applications where maximum sealing and durability are essential. Flange Type: • Blind Flanges Solid, non-bored flanges used to isolate piping systems or terminate flow. Ideal for pressure testing, maintenance, and future pipeline expansions. • Flat Face (FF) Flanges Designed with a flat sealing surface for use with full-face gaskets and flat mating components, ensuring even load distribution and effective sealing. Inconel Grades and Composition: Inconel 600 (UNS N06600) • Nickel (Ni): ≥ 72% • Chromium (Cr): 14 – 17% • Iron (Fe): 6 – 10% • Manganese (Mn): ≤ 1% • Silicon (Si): ≤ 0.5% • Carbon (C): ≤ 0.15% • Sulfur (S): ≤ 0.015% Applications: Excellent resistance to oxidation, carburization, and chloride-ion stress corrosion cracking. Used in furnace components, heat exchangers, and food processing equipment. Inconel 625 (UNS N06625) • Nickel (Ni): ≥ 58% • Chromium (Cr): 20 – 23% • Molybdenum (Mo): 8 – 10% • Niobium + Tantalum (Nb + Ta): 3.15 – 4.15% • Iron (Fe): ≤ 5% • Carbon (C): ≤ 0.10% • Manganese (Mn): ≤ 0.5% • Silicon (Si): ≤ 0.5% Applications: Outstanding corrosion and fatigue resistance in seawater and chemical environments. Common in marine, aerospace, and offshore industries. Inconel 718 (UNS N07718) • Nickel (Ni): 50 – 55% • Chromium (Cr): 17 – 21% • Iron (Fe): Balance • Niobium + Tantalum (Nb + Ta): 4.75 – 5.5% • Molybdenum (Mo): 2.8 – 3.3% • Titanium (Ti): 0.65 – 1.15% • Aluminum (Al): 0.2 – 0.8% Applications: High strength and oxidation resistance up to 700°C. Used in jet engines, gas turbines, and high-pressure valves. Applications of DIN 2627 Inconel Flanges PN 400: • Offshore Oil and Gas Platforms Withstands high-pressure, high-salinity, and corrosive environments in subsea pipelines and risers. • Chemical Processing Plants Ideal for systems handling oxidizers, acids, solvents, and reactive compounds at high temperatures and pressures. • Aerospace and Jet Propulsion Used in fuel systems, hydraulic lines, and turbine enclosures where extreme heat and stress are common. • Nuclear and Power Generation Suited for high-pressure reactor lines and heat exchanger systems exposed to radiation, heat, and corrosive media. • Desalination and Seawater Systems Highly resistant to chloride-induced pitting and crevice corrosion. • High-Temperature and Reactive Media Systems Perfect for isolating systems exposed to thermal cycling and chemical attack. Key Features: • Manufactured to DIN 2627 standards • Rated for PN 400 ultra-high-pressure systems • Blind flange design for sealing pipe ends or testing access • Flat face design for even gasket compression and sealing • Available in Inconel 600, 625, and 718 • Excellent resistance to oxidation, acids, chlorides, and high heat • High mechanical strength and fatigue resistance • Used in critical industries including aerospace, marine, oil and gas, and chemical processing • Custom sizes, alloys, pressure ratings, and surface finishes available on request Conclusion: DIN 2627 Inconel Flanges PN 400 from Ladhani Metal Corporation offer exceptional performance and reliability in the most demanding service conditions. Whether your system involves corrosive chemicals, high-pressure steam, or marine exposure, these blind flanges deliver secure sealing, longevity, and safety. Contact Ladhani Metal Corporation for material selection, technical support, or custom solutions tailored to your high-performance application.

DIN 2627 stainless steel flanges PN 400 are precision-engineered blind flanges manufactured according to the DIN 2627 standard. Designed to withstand ultra-high-pressure conditions up to 400 bar (5800 psi), these flanges are used to terminate or isolate piping systems safely and effectively. Fabricated from high-grade stainless steels, including 304, 316, and 321, these blind flanges provide superior mechanical strength, corrosion resistance, and long service life in aggressive industrial environments. Ladhani Metal Corporation is a globally recognized manufacturer and exporter of stainless steel flanges. Our DIN 2627 PN 400 blind flanges are widely trusted in sectors such as oil and gas, chemical processing, marine, energy, and high-pressure utility systems for their durability, quality, and performance under extreme conditions. Pressure Rating: • PN 400 (400 bar / 5800 psi): Suitable for high-pressure pipelines and critical systems where absolute sealing and structural integrity are required. Flange Type: • Blind Flanges Solid, non-bored flanges used to block pipeline ends or vessel nozzles. These flanges are essential for system isolation during maintenance, testing, or future expansions. • Flat Face (FF) Flanges Flat face flanges are designed to mate with flat gaskets and flat-faced components. They provide even gasket compression and are ideal when used with cast iron or brittle materials to avoid flange distortion. Stainless Steel Grades and Full Composition: Stainless Steel 304 • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 10.5% • Carbon (C): ≤ 0.08% (304), ≤ 0.03% (304L) • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Excellent general corrosion resistance. Commonly used in food processing, water systems, and chemical equipment. Stainless Steel 316 • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% • Carbon (C): ≤ 0.08% (316), ≤ 0.03% (316L) • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Enhanced resistance to chlorides and acidic environments. Ideal for marine, pharmaceutical, and chemical processing. Stainless Steel 321 • Chromium (Cr): 17.0 – 19.0% • Nickel (Ni): 9.0 – 12.0% • Titanium (Ti): ≥ 5 × C (typically 0.20 – 0.70%) • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: 321 stainless steel is stabilized with titanium, providing excellent resistance to intergranular corrosion after welding and high-temperature exposure. Commonly used in thermal processing, aerospace, and exhaust systems. Applications of DIN 2627 Stainless Steel Flanges PN 400: • Oil and Gas Industry Used in upstream and downstream systems, where high pressure and harsh chemicals are common. • Chemical and Petrochemical Plants Ideal for isolating high-pressure lines carrying corrosive or reactive chemicals. • Marine and Offshore Engineering Suitable for saltwater-exposed piping, ballast systems, and underwater applications requiring corrosion resistance. • Power Generation Applied in steam, nuclear, and thermal plants for sealing pressurized piping and vessel systems. • Aerospace and High-Temperature Systems 321-grade blind flanges are used in systems exposed to elevated temperatures and thermal cycling. • Water Treatment and Desalination Withstands chloride-induced corrosion in high-pressure brine and filtration lines. Key Features: • Manufactured to DIN 2627 specifications • PN 400 pressure rating for extreme pressure performance • Blind flange design ideal for system isolation and termination • Available in stainless steel grades 304, 304L, 316, 316L, and 321 • Flat face type for even gasket compression and sealing integrity • Superior corrosion resistance and mechanical strength • Suitable for aggressive chemical, marine, and high-temperature environments • Custom sizes, surface finishes, and pressure classes available upon request Conclusion: DIN 2627 Stainless Steel Flanges PN 400 by Ladhani Metal Corporation are designed for maximum performance in high-pressure, corrosive, and high-temperature environments. With material options including 304, 316, and titanium-stabilized 321 stainless steel, these blind flanges offer flexibility, reliability, and long-term service life across critical industries. Contact Ladhani Metal Corporation today for technical assistance, specifications, or custom flange solutions.

DIN 2627 Titanium Flanges PN 400 are high-integrity blind flanges manufactured from corrosion-resistant titanium alloys, engineered for extreme pressure applications. These flanges conform to the DIN 2627 standard and are specifically designed to close the end of a piping system, providing a reliable, leak-tight seal. With a pressure rating of PN 400 (400 bar / 5800 psi), these titanium blind flanges are ideal for high-pressure systems operating in chemically aggressive or high-temperature environments. Ladhani Metal Corporation is a globally recognized manufacturer and exporter of titanium flanges, offering top-quality components that comply with stringent international specifications. The DIN 2627 PN 400 titanium flanges are especially suited for high-demand sectors where superior material performance is essential under extreme mechanical and corrosive conditions. Pressure Rating: • PN 400 (400 bar / 5800 psi): Designed for ultra-high-pressure systems requiring secure isolation and sealing. These flanges ensure operational safety and long-term durability in critical gas, fluid, or chemical applications. Flange Type: • Blind Flanges These solid disk flanges are used to terminate the flow in a pipeline or vessel and can be easily removed for inspection or system modification. They are essential in high-pressure systems for ensuring tight sealing without any flow path. • Flat Face (FF) Flanges Utilized with full-face gaskets and flat mating surfaces, flat face blind flanges distribute bolt load evenly to prevent flange deformation, particularly when paired with brittle or non-metallic components. Titanium Grades and Composition: Titanium Grade 2 (UNS R50400) Composition: • Titanium (Ti): ≥ 98.5% • Trace Elements: Iron (Fe), Oxygen (O), Carbon (C), Nitrogen (N), Hydrogen (H) Applications: Grade 2 titanium offers excellent corrosion resistance, good ductility, and weldability, making it suitable for high-pressure chemical processing, marine systems, and water treatment environments. Titanium Grade 5 (Ti-6Al-4V, UNS R56400) Composition: • Titanium (Ti): Balance • Aluminum (Al): 5.5 – 6.75% • Vanadium (V): 3.5 – 4.5% Applications: Grade 5 titanium delivers superior tensile strength and resistance to fatigue, high temperatures, and corrosion. It is the preferred material for aerospace, defense, offshore drilling, and pressurized chemical applications requiring durability under extreme conditions. Applications of DIN 2627 Titanium Flanges PN 400: • High-Pressure Chemical and Petrochemical Systems Used to terminate pipelines in systems transporting reactive or corrosive chemicals under high pressure. • Offshore Oil and Gas Platforms Ideal for sealing high-pressure flowlines and isolation points exposed to seawater and mechanical stress. • Aerospace Hydraulic and Fuel Systems Applied in high-performance systems requiring lightweight, pressure-resistant sealing. • Marine Engineering and Subsea Installations Deployed in subsea structures and marine piping where both high pressure and chloride-induced corrosion are concerns. • Nuclear and Power Generation Suited for extreme environments involving radioactive, corrosive, or high-temperature media. • Industrial Process Systems Used in closed-loop systems, autoclaves, reactors, and high-pressure vessels. Key Features: • Manufactured according to DIN 2627 specifications • PN 400 pressure rating for ultra-high-pressure environments • Exceptional corrosion resistance in seawater and chemical exposure • Titanium Grade 2 and Grade 5 options for specific strength and application needs • Blind flange design for secure system termination • Flat face flanges ensure optimal gasket compatibility and load balance • High strength-to-weight ratio and long service life • Suitable for offshore, aerospace, chemical, and power industries • Custom configurations, sizes, and finishes available upon request Conclusion: DIN 2627 Titanium Flanges PN 400 by Ladhani Metal Corporation are engineered to meet the highest standards of performance in ultra-high-pressure systems. Whether in offshore drilling, aerospace, or advanced chemical processes, these flanges offer unmatched reliability, corrosion resistance, and structural integrity. Contact Ladhani Metal Corporation for technical guidance, material selection, or customized solutions for your specific project needs.

DIN 2634 carbon steel flanges PN 25 are high-strength weld neck flanges manufactured according to the DIN 2634 standard. Specifically designed for use in high-pressure piping systems operating up to 25 bar (362 psi), these flanges offer excellent mechanical performance and are suitable for a wide range of industrial applications. Manufactured from quality carbon steel, they provide strong, durable, and cost-effective solutions for systems where corrosion resistance requirements are moderate but structural integrity is critical. Ladhani Metal Corporation is a recognized manufacturer and global supplier of carbon steel flanges, known for precision engineering, strict adherence to international standards, and advanced production capabilities. Each flange is subject to comprehensive testing and inspection to ensure reliability and consistent performance under demanding operating conditions. Pressure Rating: • PN 25 (25 bar / 362 psi): Suitable for medium to high-pressure applications where strength and impact resistance are essential. Flange Type: • Weld Neck Flanges Designed with a tapered hub to ensure smooth transition from flange to pipe, weld neck flanges are ideal for systems experiencing frequent thermal cycling, pressure fluctuations, and mechanical stress. • Flat Face (FF) Flanges Recommended for use with gaskets made from soft materials or when connecting to cast iron components, flat face flanges ensure even gasket compression and reliable sealing performance. Carbon Steel Grades and Typical Composition: Carbon Steel (ASTM A105 / C22.8 equivalent) – Forged Carbon Steel • Carbon (C): ≤ 0.35% • Manganese (Mn): 0.60 – 1.05% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.040% • Silicon (Si): 0.10 – 0.35% • Iron (Fe): Balance Applications: Commonly used in oil and gas, petrochemical, water transmission, and power generation industries, especially in applications where high mechanical strength and pressure handling are more critical than corrosion resistance. Applications of DIN 2634 Carbon Steel Flanges PN 25: • Oil and Gas Pipelines Widely used in upstream and downstream systems for fluid transport under high pressure. • Petrochemical and Refining Plants Efficiently handles high-pressure flow systems involving hydrocarbons and steam. • Power Plants and Boiler Systems Suited for high-pressure steam and water lines, offering excellent tensile strength and fatigue resistance. • Water and Wastewater Infrastructure Used in municipal and industrial pipelines requiring cost-effective, robust flange connections. • General Industrial Systems Applicable in a wide range of mechanical systems and processing plants handling non-corrosive or mildly corrosive media. Key Features: • Compliant with DIN 2634 pressure and dimensional standards • PN 25 rating ensures compatibility with high-pressure pipelines • High tensile and yield strength for demanding structural requirements • Weld neck design enhances resistance to vibration and thermal expansion • Cost-effective solution for pressure-bearing connections • Available in standard and custom sizes, surface finishes, and pressure ratings • Heat treatment and coating options available upon request Conclusion: DIN 2634 carbon steel flanges PN 25 from Ladhani Metal Corporation provide a robust and economical solution for high-pressure systems where mechanical performance is essential. Their strength, reliability, and adaptability make them a preferred choice across industries such as oil and gas, power generation, and water infrastructure. For technical specifications, custom configurations, or pricing, contact Ladhani Metal Corporation today.

DIN 2634 super duplex steel flanges PN 25 are high-performance weld neck flanges designed in accordance with the DIN 2634 standard. These flanges are engineered for high-pressure systems operating up to 25 bar (362 psi) and are manufactured from premium super duplex stainless steel grades. Known for their superior strength, excellent corrosion resistance, and enhanced resistance to stress corrosion cracking and pitting, super duplex flanges are ideally suited for demanding industrial environments. Their robust mechanical properties make them a reliable choice for aggressive service conditions and high-pressure applications. Ladhani Metal Corporation is a global leader in the manufacturing and supply of super duplex steel flanges. With advanced production facilities, precision engineering capabilities, and rigorous quality assurance practices, the company ensures that each flange meets the highest standards of safety, durability, and performance under extreme conditions. Pressure Rating: • PN 25 (25 bar / 362 psi): Designed for systems requiring high strength and exceptional corrosion resistance under elevated pressure conditions. Flange Type: • Weld Neck Flanges Featuring a tapered hub design, weld neck flanges deliver optimal stress distribution and secure, leak-free connections in systems exposed to thermal and mechanical loading. • Flat Face (FF) Flanges Recommended for use with softer gasket materials or systems incorporating cast iron components, flat face flanges provide uniform gasket compression and reliable sealing. Super Duplex Steel Grades and Typical Composition: Super Duplex Steel (UNS S32750 / S32760) – Ferritic-Austenitic Stainless Steel • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 6.0 – 8.0% • Molybdenum (Mo): 3.0 – 5.0% • Nitrogen (N): 0.2 – 0.3% • Iron (Fe): Balance Applications: Widely used in environments where high strength, corrosion resistance, and resistance to chloride-induced stress corrosion cracking are essential, such as offshore platforms, chemical plants, and desalination facilities. Applications of DIN 2634 Super Duplex Steel Flanges PN 25: • Offshore and Subsea Installations Withstand chloride-rich marine environments, offering long-term durability and resistance to seawater corrosion. • Chemical and Petrochemical Processing Suitable for handling aggressive chemicals, acids, and solvents under high pressure and temperature conditions. • Desalination and Water Treatment Plants Perform reliably in saline and brine-rich environments with superior resistance to pitting and crevice corrosion. • Power Generation and Heat Exchangers Offer excellent performance in high-temperature, high-pressure applications requiring strength and corrosion protection. • Pulp and Paper Industry Operate effectively in harsh chemical environments including bleach and acidic processing streams. Key Features: • Manufactured to DIN 2634 specifications for dimensional accuracy and pressure handling • PN 25 pressure class supports high-performance applications • Superior resistance to localized corrosion including pitting and stress corrosion cracking • High strength-to-weight ratio and excellent mechanical properties • Weld neck design ensures structural integrity and resistance to fatigue • Available in both UNS S32750 and S32760 super duplex grades • Customizable in size, pressure class, and surface finish upon request Conclusion: DIN 2634 super duplex steel flanges PN 25 from Ladhani Metal Corporation are engineered to deliver top-tier performance in environments where mechanical strength and corrosion resistance are non-negotiable. Their robust construction and excellent durability make them ideal for marine, chemical, and industrial applications operating under high pressure. For detailed specifications, project consultations, or a custom quote, contact Ladhani Metal Corporation today.