Ladhani Metal Corporation manufactures and exports Half Round Shields for LTSH (Low Temperature Superheater) Tubes, Type-IV design, engineered to safeguard boiler tubes from erosion, oxidation, and abrasive damage. LTSH tubes in Type-IV sections operate in the convection pass of the boiler, exposed to high flue gas velocities, dust-laden atmospheres, and ash particles that gradually erode the tube surfaces. Type-IV Half Round Shields provide extended surface coverage and robust protection, making them ideal for demanding boiler environments where long service life is critical. Function of LTSH Tubes • Carry steam through the low-temperature superheater section of the boiler • Operate under moderate-to-high temperatures with flue gas erosion risk • Protected with Half Round Shields to reduce wear, oxidation, and maintenance frequency Ladhani Metal Corporation manufactures, supplies, and exports Half Round Tube Shields for LTSH, Type-IV, in a wide range of sizes and grades to meet diverse power plant and industrial boiler requirements. Available Grades • SS 304 / SS 304L • SS 310 / SS 310S • SS 316 / SS 316L • SS 410 / SS 420 / SS 430 • 1Cr13 • 1Cr18Ni9Ti • 1Cr20Ni14Si2 • 1Cr25Ni20Si2 • Cr23Ni13 • Cr25Ni20 Applications: Suitable for low-temperature superheater sections in thermal power stations, waste heat recovery boilers (WHRBs), and heat recovery steam generators (HRSGs), where durability and erosion resistance are required. Uses • Protects LTSH tubes from erosion caused by flue gases and abrasive particles • Minimizes scaling and damage in soot blower impact zones • Extends tube life and reduces unplanned shutdowns • Widely used in WHRBs, HRSGs, utility boilers, and industrial steam plants Features • High resistance to oxidation and erosive flue gases • Stable mechanical performance at elevated temperatures • Designed for precision fit on Type-IV LTSH tubes • Available in stainless steels and high-performance special alloys Applications • Power generation boilers – Reliable shielding for LTSH tubes under erosive gas flow • Waste heat recovery boilers – Prevents early tube failures from abrasion • Heat recovery steam generators – Ensures long service life in cyclic conditions • Industrial boilers – Provides dependable tube protection in dusty environments Conclusion The Half Round Shield for LTSH, Type-IV, by Ladhani Metal Corporation is a robust and efficient solution for boiler tube erosion protection. Manufactured in stainless steel and alloy grades such as SS 304/304L, SS 310/310S, SS 316/316L, SS 410/420/430, 1Cr13, 1Cr18Ni9Ti, 1Cr20Ni14Si2, 1Cr25Ni20Si2, Cr23Ni13, and Cr25Ni20, these shields are engineered for durability, easy installation, and superior performance. For detailed specifications and supply inquiries, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #HalfRoundReheaterShield #ReheaterTubeShield #BoilerReheaterProtection #PowerPlantTubeShield #BoilerErosionShield #SteamBoilerTubeShield #HighTempTubeShield #BoilerWearProtection

Ladhani Metal Corporation offers SS U-Bend Half-Round Tube Shields engineered to protect U-bend sections of boiler tubes in power plants, waste heat recovery boilers (WHRBs), heat recovery steam generators (HRSGs), and industrial steam systems. U-bend regions are especially vulnerable to erosion, flue gas turbulence, oxidation, and abrasive wear from ash particles. These shields provide a robust protective barrier, reducing tube thinning and extending the operational lifespan of boiler tubes. Function of U-Bend Sections • Carry water or steam through tight-radius bends in boiler heating circuits • Continuously exposed to flue gas turbulence, high temperatures, and particle erosion • Require Half-Round Tube Shields to minimize wear and prevent premature tube failures Ladhani Metal Corporation manufactures, supplies, and exports SS U-Bend Half-Round Tube Shields in various lengths, radii, and thicknesses, ensuring precision fit and durability in demanding operating environments. Available Grades • SS 304 / SS 304L • SS 310 / SS 310S • SS 316 / SS 316L • SS 410 / SS 420 / SS 430 • 1Cr13 • 1Cr18Ni9Ti • 1Cr20Ni14Si2 • 1Cr25Ni20Si2 • Cr23Ni13 • Cr25Ni20 Applications: Suitable for protecting U-bend sections in boilers, reheaters, superheaters, and economizers exposed to high-temperature flue gases and erosion-prone conditions. Uses • Shields U-bend tube areas from high-velocity flue gas erosion and soot blower impact • Prevents thinning, scaling, and tube wall damage in curved tube regions • Improves reliability and service life of critical steam circuits • Applicable in power plants, WHRBs, HRSGs, and industrial boilers Features • Excellent resistance to erosion, scaling, and oxidation • Available in stainless steel and heat-resistant alloy grades for varied service conditions • High mechanical and thermal stability under continuous high temperatures • Precision-formed to match U-bend geometry for secure fit and easy installation Applications • Power plant boilers – Superheater and reheater U-bend protection • Waste heat recovery boilers – Guards tight-radius bends from abrasive gases • Heat recovery steam generators – Prevents erosion in high-velocity gas zones • Industrial boilers – Ensures long-term protection in steam and process plants Conclusion The SS U-Bend Half-Round Tube Shield by Ladhani Metal Corporation ensures dependable protection for boiler U-bend sections against erosion, oxidation, and thermal stress. Available in stainless steels and high-performance alloys including SS 304/304L, 310/310S, 316/316L, 410/420/430, 1Cr13, 1Cr18Ni9Ti, 1Cr20Ni14Si2, 1Cr25Ni20Si2, Cr23Ni13, and Cr25Ni20, these shields are manufactured with precision to meet global quality standards. For technical details and supply inquiries, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #HalfRoundReheaterShield #ReheaterTubeShield #BoilerReheaterProtection #PowerPlantTubeShield #BoilerErosionShield #SteamBoilerTubeShield #HighTempTubeShield #BoilerWearProtection

Ladhani Metal Corporation offers 1Cr13 Half Round Tube Shields designed to protect boiler tubes from erosion, oxidation, and high-temperature wear in power plants, HRSGs, WHRBs, and industrial steam systems. Boiler tubes in reheater and superheater sections are exposed to high-velocity flue gases, abrasive ash particles, and thermal cycling, which often lead to premature tube thinning and failures. Manufactured from martensitic stainless steel grade 1Cr13, these shields provide good mechanical strength, moderate oxidation resistance, and reliable protection against erosion in demanding boiler environments. Function of Boiler Tubes • Carry water or steam through critical heating sections of the boiler • Exposed to high temperatures (often > 540°C) and erosive flue gases • Protected with Half Round Tube Shields in erosion-prone and soot blower impact zones Ladhani Metal Corporation manufactures, supplies, and exports 1Cr13 Half Round Tube Shields in various lengths, diameters, and thicknesses, meeting domestic and international requirements. 1Cr13 Grade Chemical Composition – Martensitic Stainless Steel • Carbon (C): ≤ 0.15% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 12.00 – 14.00% • Nickel (Ni): ≤ 0.60% • Iron (Fe): Balance Applications: Suitable for superheater and reheater tubes in thermal power plants, waste heat recovery boilers, industrial boilers, and process heaters requiring strong mechanical performance with moderate corrosion resistance. Uses • Shields boiler tubes from erosion and oxidation in flue gas streams • Protects against soot blower wear and abrasive ash particles • Extends tube life in high-temperature and erosive conditions • Widely applied in WHRBs, HRSGs, and utility boilers Features • Strong mechanical strength and durability at high temperatures • Moderate oxidation and corrosion resistance in boiler atmospheres • Cost-effective erosion protection solution • Engineered for precision fit and easy installation Applications • Power generation boilers – Long-term protection for superheater and reheater tubes • Waste heat recovery boilers – Shields tubes in abrasive gas flows • Industrial steam systems – Reliable under medium-to-high temperature service • Process boilers – Provides extended tube service life in erosive environments Conclusion The 1Cr13 Half Round Tube Shield for Boiler Tubes by Ladhani Metal Corporation offers durable and economical protection against erosion and oxidation in high-temperature boiler environments. Designed for precision fit and long service life, these shields are available in multiple export-ready specifications. For technical details and supply inquiries, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #HalfRoundReheaterShield #ReheaterTubeShield #BoilerReheaterProtection #PowerPlantTubeShield #BoilerErosionShield #SteamBoilerTubeShield #HighTempTubeShield #BoilerWearProtection

Ladhani Metal Corporation offers 1Cr25Ni20Si2 Half Round Tube Shields designed for the protection of boiler tubes in reheater, superheater, and waste heat recovery sections. Manufactured from high-performance heat-resistant alloy grade 1Cr25Ni20Si2, these shields offer superior high-temperature strength, excellent oxidation resistance, and enhanced service life in extreme boiler environments. The addition of silicon improves oxidation resistance and thermal stability, making them suitable for long-term use in aggressive furnace conditions. Function of Boiler Tubes • Carry water or steam through critical heating sections of the boiler • Continuously exposed to scaling, erosion, and oxidation from hot flue gases • Protected with Half Round Tube Shields in erosion-prone and soot blower impact zones Ladhani Metal Corporation manufactures, supplies, and exports 1Cr25Ni20Si2 Half Round Tube Shields in multiple lengths, diameters, and thicknesses, tailored to domestic and international requirements. 1Cr25Ni20Si2 Grade Chemical Composition – Heat Resistant Alloy Steel • Carbon (C): ≤ 0.20% • Manganese (Mn): ≤ 1.50% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): 1.00 – 2.00% • Chromium (Cr): 24.00 – 26.00% • Nickel (Ni): 19.00 – 22.00% • Iron (Fe): Balance Applications: Ideally suited for reheater and superheater sections of thermal power plants, waste heat recovery boilers, HRSGs, petrochemical heaters, and other industrial furnaces operating at high temperatures under oxidizing and erosive conditions. Uses • Shields boiler tubes from high-temperature oxidation, erosion, and scaling • Protects reheater and superheater tubes against soot blower wear • Extends service life of critical boiler tube components in thermal plants • Commonly applied in WHRBs, HRSGs, and petrochemical processing units Features • Excellent oxidation and scaling resistance at elevated temperatures • High thermal stability due to silicon addition in the alloy • Strong creep resistance for long-term boiler service • Accurate fit and easy installation to cover high-wear tube surfaces Applications • Power generation boilers – Protection for tubes in reheater and superheater zones • Waste heat recovery boilers – Guards against erosive and high-temperature gases • Industrial steam plants – Ensures extended tube life under severe thermal cycling • Petrochemical heaters – Reliable in corrosive and oxidizing service environments Conclusion The 1Cr25Ni20Si2 Half Round Tube Shield for Boiler Tubes by Ladhani Metal Corporation delivers durable, high-temperature protection against erosion, oxidation, and scaling in the harshest boiler conditions. With superior thermal stability and long service life, these shields reduce downtime and extend equipment reliability. Available in export-ready sizes and specifications, they are trusted worldwide for demanding boiler and furnace applications. For supply and technical inquiries, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #HalfRoundReheaterShield #ReheaterTubeShield #BoilerReheaterProtection #PowerPlantTubeShield #BoilerErosionShield #SteamBoilerTubeShield #HighTempTubeShield #BoilerWearProtection

Ladhani Metal Corporation offers Cr23Ni13 Half Round Tube Shields designed to protect boiler tubes from erosion, oxidation, and high-temperature wear in boilers, HRSGs, WHRBs, and industrial steam systems. Boiler tubes in reheater and superheater sections are continuously exposed to extreme heat, flue gases, and abrasive ash particles, which can cause severe damage and shorten their service life. Manufactured from heat-resistant stainless steel grade Cr23Ni13, these shields provide excellent high-temperature strength, oxidation resistance, and long-term stability in thermal power and industrial boilers. Function of Boiler Tubes • Carry water or steam through critical heating sections of the boiler • Exposed to scaling, erosion, and oxidation from high-temperature flue gases • Protected with Half Round Tube Shields in zones of high wear and soot blower impact Ladhani Metal Corporation manufactures, supplies, and exports Cr23Ni13 Half Round Tube Shields in various lengths, diameters, and thicknesses, meeting domestic and international requirements. Cr23Ni13 Grade Chemical Composition – Heat Resistant Stainless Steel • Carbon (C): ≤ 0.20% • Manganese (Mn): ≤ 1.50% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.50% • Chromium (Cr): 22.00 – 25.00% • Nickel (Ni): 11.00 – 14.00% • Iron (Fe): Balance Applications: Suitable for use in superheater and reheater sections of thermal power plants, waste heat recovery boilers, HRSGs, and petrochemical furnaces where high creep strength and oxidation resistance are critical. Uses • Protects boiler tubes from erosion, oxidation, and soot blower impact • Shields reheater and superheater tubes in high-temperature, high-velocity gas zones • Extends service life of critical steam circuit components • Commonly used in HRSGs, WHRBs, industrial boilers, and petrochemical heaters Features • Superior resistance to oxidation and scaling at elevated temperatures • High creep strength for long-term boiler service • Stable performance under fluctuating thermal cycles • Precision-engineered design for accurate tube coverage and easy installation Applications • Power generation boilers – Reliable protection for reheater and superheater tubes • Waste heat recovery boilers – Guards tubes in abrasive flue gas zones • Industrial steam plants – Ensures extended service life in high-temperature operations • Petrochemical heaters – Suitable for corrosive and oxidizing boiler environments Conclusion The Cr23Ni13 Half Round Tube Shield for Boiler Tubes by Ladhani Metal Corporation provides long-lasting, high-temperature protection against erosion and oxidation in the most demanding boiler conditions. Engineered for precision fit and durability, these shields significantly extend tube service life while reducing maintenance downtime. Available in a wide range of export-ready specifications, they are trusted worldwide for consistent performance. For supply and technical inquiries, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #HalfRoundReheaterShield #ReheaterTubeShield #BoilerReheaterProtection #PowerPlantTubeShield #BoilerErosionShield #SteamBoilerTubeShield #HighTempTubeShield #BoilerWearProtection

Ladhani Metal Corporation offers 1Cr18Ni9Ti Half Round Tube Shields designed to protect boiler tubes in power plants, HRSGs, WHRBs, and industrial steam systems. Boiler tubes are frequently exposed to high-temperature flue gases, ash particles, soot blower erosion, and oxidation, which can reduce their service life. Manufactured from stabilized austenitic stainless steel grade 1Cr18Ni9Ti, these shields provide excellent corrosion resistance, high-temperature oxidation resistance, and added stabilization against intergranular corrosion due to titanium, ensuring durability and long-term reliability in demanding boiler applications. Function of Boiler Tubes • Carry water or steam through heating sections of the boiler • Continuously exposed to oxidation, erosion, and abrasive flue gas particles • Require Half Round Tube Shields in soot blower and high-wear zones Ladhani Metal Corporation manufactures, supplies, and exports 1Cr18Ni9Ti Half Round Tube Shields in various lengths, diameters, and thicknesses to meet global industry requirements. 1Cr18Ni9Ti Grade Chemical Composition – Austenitic Stainless Steel • Carbon (C): ≤ 0.12% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 17.00 – 19.00% • Nickel (Ni): 8.00 – 11.00% • Titanium (Ti): ≥ 5 × C% • Iron (Fe): Balance Applications: Suitable for reheater and superheater tubes in thermal power plants, HRSGs, waste heat recovery boilers, petrochemical heaters, and industrial steam systems operating under corrosive and high-temperature conditions. Uses • Protects boiler tubes from oxidation, scaling, and erosion damage • Shields tubes against soot blower impact and abrasive flue gas particles • Extends service life of superheater and reheater components • Widely used in utility boilers, WHRBs, HRSGs, and chemical process heaters Features • Excellent corrosion and oxidation resistance at elevated temperatures • Titanium stabilization prevents intergranular corrosion during welding • Good mechanical properties under thermal cycling conditions • Precision-engineered for accurate tube fit and easy installation Applications • Power generation boilers – Protection for reheater and superheater tube sections • Waste heat recovery boilers – Guards against erosive flue gas conditions • Industrial steam systems – Reliable in fluctuating temperature cycles • Petrochemical and refinery heaters – Effective in corrosive, oxidizing environments Conclusion The 1Cr18Ni9Ti Half Round Tube Shield for Boiler Tubes by Ladhani Metal Corporation ensures reliable, long-lasting protection against erosion, oxidation, and corrosive damage in high-temperature boiler environments. With titanium stabilization, these shields resist intergranular corrosion and extend tube service life, making them an excellent choice for critical boiler systems. Available in a wide range of export-ready specifications, they are trusted by industries worldwide. For technical support and supply inquiries, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #HalfRoundReheaterShield #ReheaterTubeShield #BoilerReheaterProtection #PowerPlantTubeShield #BoilerErosionShield #SteamBoilerTubeShield

Ladhani Metal Corporation offers SS 316L Half Round Tube Shields designed to protect boiler tubes in thermal power plants, HRSGs, WHRBs, and industrial steam systems. Boiler tubes face severe service conditions such as high-temperature flue gas erosion, oxidation, and soot blower impact, which significantly reduce operational life. Manufactured from low-carbon molybdenum-bearing austenitic stainless steel grade SS 316L, these shields provide excellent corrosion resistance, superior scaling resistance, and improved weldability by minimizing the risk of carbide precipitation during welding. Function of Boiler Tubes • Carry water or steam through heating sections of the boiler • Continuously exposed to high-temperature flue gases, ash, and corrosive particles • Require Half Round Tube Shields in high-erosion, corrosive, and soot blower zones Ladhani Metal Corporation manufactures, supplies, and exports SS 316L Half Round Tube Shields in various lengths, diameters, and thicknesses to cater to both domestic and international requirements. SS 316L Grade Chemical Composition – Austenitic Stainless Steel • Carbon (C): ≤ 0.03% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.00 – 18.00% • Nickel (Ni): 10.00 – 14.00% • Molybdenum (Mo): 2.00 – 3.00% • Iron (Fe): Balance Applications: Suitable for superheater and reheater tubes in power generation boilers, petrochemical heaters, HRSGs, and waste heat recovery boilers operating in corrosive and high-temperature conditions. Uses • Protects boiler tubes from erosion, oxidation, and flue gas corrosion • Shields tubes against soot blower impact and abrasive ash particles • Extends service life of superheater and reheater components in steam circuits • Applicable in WHRBs, HRSGs, utility boilers, and process steam plants Features • Superior corrosion resistance in oxidizing and chloride-rich atmospheres • Low carbon content reduces sensitization and enhances weldability • Excellent resistance to pitting and crevice corrosion due to molybdenum content • Precision-engineered for exact tube curvature and easy installation Applications • Power generation boilers – Long-lasting protection for reheater and superheater tubes • Waste heat recovery boilers – Reliable against particle erosion and scaling • Industrial steam plants – Performs well under fluctuating high-temperature cycles • Petrochemical and chemical heaters – Ensures durability in corrosive environments Conclusion The SS 316L Half Round Tube Shield for Boiler Tubes by Ladhani Metal Corporation provides long-term, corrosion-resistant protection under demanding boiler conditions. With enhanced weldability, excellent pitting resistance, and reliable high-temperature stability, these shields extend tube service life and reduce maintenance needs. Available in a wide range of export-ready specifications, they are trusted solutions for global power, petrochemical, and industrial sectors. For supply and technical inquiries, contact Ladhani Metal Corporation.

Ladhani Metal Corporation offers SS 316 Half Round Tube Shields designed to protect boiler tubes in power plants, HRSGs, WHRBs, and industrial steam systems. Boiler tubes often face high-temperature flue gas erosion, oxidation, and soot blower impact, which can reduce their operational life. Manufactured from molybdenum-bearing austenitic stainless steel grade SS 316, these shields provide excellent resistance to pitting, crevice corrosion, and scaling in chloride-rich and corrosive boiler atmospheres, making them highly reliable for demanding service conditions. Function of Boiler Tubes • Carry water or steam through heating sections of the boiler • Continuously exposed to high-temperature flue gases, ash, and corrosive deposits • Require Half Round Tube Shields in high-erosion, soot blower, and corrosive zones Ladhani Metal Corporation manufactures, supplies, and exports SS 316 Half Round Tube Shields in customized lengths, diameters, and thicknesses to meet diverse industrial requirements worldwide. SS 316 Grade Chemical Composition – Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.00 – 18.00% • Nickel (Ni): 10.00 – 14.00% • Molybdenum (Mo): 2.00 – 3.00% • Iron (Fe): Balance Applications: Suitable for superheater and reheater tubes in thermal power stations, waste heat recovery boilers, HRSGs, petrochemical heaters, and steam plants exposed to corrosive flue gases and high operating temperatures. Uses • Protects boiler tubes against high-temperature corrosion and erosion • Shields tubes from soot blower and abrasive particle damage • Extends service life of boiler heating components in corrosive atmospheres • Widely used in WHRBs, HRSGs, and utility boilers requiring extra corrosion resistance Features • Superior resistance to corrosion and scaling in chloride-laden boiler environments • Enhanced pitting and crevice corrosion resistance due to molybdenum content • Excellent mechanical strength and stability at elevated temperatures • Manufactured for precise fit and easy installation Applications • Power generation boilers – Reliable protection for reheater and superheater tubes • Waste heat recovery boilers – Guards tubes against erosion and flue gas deposits • Industrial steam plants – Ensures longer life in corrosive and erosive atmospheres • Petrochemical process heaters – Ideal for chloride-rich and corrosive flue gas conditions Conclusion The SS 316 Half Round Tube Shield for Boiler Tubes by Ladhani Metal Corporation delivers reliable protection against erosion, scaling, and corrosive damage in harsh boiler environments. Designed with molybdenum-enhanced stainless steel, these shields ensure long service life, reduced maintenance, and superior resistance under severe operating conditions. Available in export-ready specifications, they are a trusted solution for global power, petrochemical, and industrial sectors. For supply and technical support, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #HalfRoundReheaterShield #ReheaterTubeShield #BoilerReheaterProtection #PowerPlantTubeShield #BoilerErosionShield

Ladhani Metal Corporation offers SS 304L Half Round Tube Shields designed to protect boiler tubes in power plants, HRSGs, WHRBs, and industrial steam systems. Boiler tubes are exposed to high-velocity flue gases, abrasive ash particles, and soot blower erosion that lead to thinning, oxidation, and tube wear. Manufactured from low-carbon austenitic stainless steel grade SS 304L, these shields provide superior corrosion resistance, excellent high-temperature oxidation resistance, and improved weldability by minimizing carbide precipitation during welding. Function of Boiler Tubes • Carry water or steam through different heating sections of the boiler • Continuously exposed to flue gases, soot, and erosive ash particles • Often protected with Half Round Tube Shields in erosion-prone and soot blower impact zones Ladhani Metal Corporation manufactures, supplies, and exports SS 304L Half Round Tube Shields in various lengths, diameters, and thicknesses, catering to both domestic and international industries. SS 304L Grade Chemical Composition – Austenitic Stainless Steel • Carbon (C): ≤ 0.03% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 18.00 – 20.00% • Nickel (Ni): 8.00 – 12.00% • Iron (Fe): Balance Applications: Suitable for boiler tubes in thermal power plants, WHRBs, HRSGs, and industrial steam plants requiring excellent corrosion resistance and long service life under high-temperature operation. Uses • Shields boiler tubes from erosion, oxidation, and soot blower impact • Protects tubes in high-velocity gas flow and ash-laden environments • Extends service life of steam circuit components in boilers • Applied in HRSGs, WHRBs, and industrial process plants Features • Low-carbon content – prevents sensitization and carbide precipitation • Excellent corrosion and oxidation resistance at high temperatures • High strength and durability in demanding boiler atmospheres • Precision fit for quick installation and maximum protection Applications • Power generation boilers – Protection for tubes in high-temperature reheater and superheater sections • Waste heat recovery boilers – Guards against erosive gas and ash flows • Industrial steam systems – Reliable under fluctuating operational cycles • Petrochemical and process boilers – Long service life in corrosive and erosive environments Conclusion The SS 304L Half Round Tube Shield for Boiler Tubes by Ladhani Metal Corporation delivers reliable, long-lasting protection against erosion, oxidation, and soot blower damage. With excellent weldability, corrosion resistance, and durability, these shields extend tube service life and reduce maintenance costs. Available in export-ready specifications, they are an ideal choice for global boiler and power plant applications. For technical details and supply inquiries, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #HalfRoundReheaterShield #ReheaterTubeShield #BoilerReheaterProtection #PowerPlantTubeShield #BoilerErosionShield #SteamBoilerTubeShield #HighTempTubeShield #BoilerWearProtection