Ladhani Metal Corporation manufactures, supplies, and exports Boiler Tube Erosion Shields and Bends designed to safeguard boiler tubes from severe erosion, abrasion, oxidation, and soot blower damage. Installed mainly on tube bends and high-impact zones, these shields act as sacrificial protective covers that extend tube service life, minimize maintenance costs, and improve operational reliability in power plants, WHRBs, HRSGs, and industrial boilers. Function of Boiler Tube Erosion Shield / Bend • Protects boiler tubes against erosion caused by high-velocity flue gases and abrasive fly ash particles • Shields critical bends and exposed sections from soot blower jet damage • Provides resistance to high-temperature oxidation and corrosion in aggressive boiler environments • Ensures longer service life of boiler components under extreme pressure and temperature conditions Available Grades Stainless Steel Grades: • SS 304 / SS 304L • SS 310 / SS 310S • SS 316 / SS 316L • SS 410 / SS 420 / SS 430 Special Alloy Grades: • 1Cr18Ni9Ti • Cr25Ni20 • 1Cr25Ni20Si2 • Cr23Ni13 • 1Cr20Ni14Si2 • 1Cr13 Applications • Power generation boilers – protection of reheater, superheater, and economizer tube sections • Waste Heat Recovery Boilers (WHRBs) – shielding tubes in high-erosion zones • Heat Recovery Steam Generators (HRSGs) – erosion and oxidation control in tube bends • Petrochemical and process heaters – protection against thermal cycling and erosive particles • Industrial steam plants – ensuring durability in corrosive and abrasive service Features • Excellent resistance to erosion and corrosion at high temperatures • Effective protection from soot blower jet impingement and flue gas particle flow • Manufactured with precision for an accurate fit on bends and exposed tube areas • Available in stainless steel and special alloy grades for diverse service conditions • Export-ready in multiple sizes, diameters, and bend profiles Conclusion Boiler Tube Erosion Shields and Bends from Ladhani Metal Corporation are engineered for superior performance in high-temperature, erosive environments. With a complete range of stainless steel and special alloy grades, these shields provide long-lasting tube protection, reduce maintenance downtime, and enhance boiler efficiency for both domestic and global clients. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #HalfRoundReheaterShield #ReheaterTubeShield #BoilerReheaterProtection #PowerPlantTubeShield #BoilerErosionShield #SteamBoilerTubeShield #HighTempTubeShield #BoilerWearProtection

Ladhani Metal Corporation manufactures, supplies, and exports a comprehensive range of Erosion Protection Shields designed to safeguard boiler tubes, superheater tubes, and reheater tubes in power plants, industrial boilers, and heat recovery systems. These shields, also known as half round tube shields or boiler tube erosion shields, act as a protective cover over tubes exposed to high-velocity flue gases, abrasive fly ash, and soot blower impact. By reducing direct contact with erosive and corrosive media, they significantly extend the service life of tubes and minimize unplanned shutdowns. Function of Erosion Protection Shields • Provide a wear-resistant barrier for boiler tubes in erosive zones • Reduce damage caused by abrasive ash particles and high-velocity flue gases • Protect against soot blower jet erosion and localized overheating • Extend operational life of tubes, lowering maintenance and replacement costs Available Grades • SS 304 / SS 304L • SS 310 / SS 310S • SS 316 / SS 316L • SS 410 / SS 420 / SS 430 • 1Cr13 • 1Cr18Ni9Ti • Cr25Ni20 • 1Cr25Ni20Si2 • Cr23Ni13 • 1Cr20Ni14Si2 Ladhani Metal Corporation manufactures Erosion Protection Shields in multiple lengths, diameters, and thicknesses, customized to fit various tube sizes and curvature requirements. All shields are precision-engineered for easy installation and secure fitment, ensuring reliable performance even under extreme boiler conditions. Applications • Power generation boilers – protection of superheater, reheater, and economizer tubes • Waste Heat Recovery Boilers (WHRBs) – safeguard against flue gas erosion • Heat Recovery Steam Generators (HRSGs) – protect tubes under continuous high-velocity gas exposure • Petrochemical process heaters and industrial steam systems – long-lasting erosion and oxidation resistance Features • Wide material grade availability to suit varied service conditions • High resistance to oxidation, scaling, and erosion at elevated temperatures • Low maintenance solution that improves tube reliability and lifespan • Export-ready specifications with assured quality and durability Conclusion Erosion Protection Shields from Ladhani Metal Corporation are engineered to deliver long-term protection for boiler tubes operating in highly erosive and corrosive environments. With a wide range of stainless steel and alloy grades available, these shields provide tailored solutions for diverse industrial applications, ensuring maximum efficiency and reduced operational downtime. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #HalfRoundReheaterShield #ReheaterTubeShield #BoilerReheaterProtection #PowerPlantTubeShield #BoilerErosionShield #SteamBoilerTubeShield #HighTempTubeShield #BoilerWearProtection

Half Round Tube Shield Ladhani Metal Corporation manufactures 1Cr25Ni20Si2 Half Round Straight Tube Shields to deliver exceptional protection to straight boiler and heat exchanger tubes in aggressive high-temperature environments. 1Cr25Ni20Si2 Half Round Straight Tube Shield The 1Cr25Ni20Si2 Half Round Straight Tube Shield is fabricated in a semi-cylindrical form to protect the outer surface of straight tubes from scaling, tube wall thinning, and structural damage caused by hot combustion gases or ash-laden flows. Its high silicon content improves oxidation resistance and inhibits the formation of brittle scales, while the alloy’s high-temperature stability ensures long service life under cyclic heating and cooling operations. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of 1Cr25Ni20Si2 Half Round Straight Tube Shields, offering precise fit and durable tube protection across thermal and petrochemical industries. Material Grade 1Cr25Ni20Si2 – High-chromium, high-nickel heat-resistant alloy with enhanced silicon for improved oxidation and thermal shock resistance. Chemical Composition of 1Cr25Ni20Si2 • Carbon (C): ≤ 0.10% • Silicon (Si): 1.50 – 2.50% • Manganese (Mn): ≤ 1.50% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Uses • Radiant section protection in waste heat boilers and reformers • Straight tube shielding in high-temperature furnaces • Heat recovery units in ammonia, hydrogen, and methanol plants • Erosion control in fluidized bed combustion systems Features • Excellent oxidation and scaling resistance at high temperatures • High thermal stability under long-term service • Superior resistance to carburization and sulfidation • Durable against erosion from high-velocity gas and ash • Maintains mechanical integrity under thermal shock • Custom-fabricated to match tube size, radius, and operational needs Applications • petrochemical and fertilizer plants – For reformer and convection section protection • power generation – In boilers, WHRBs, and waste incinerators • thermal process systems – For furnace and heat exchanger tube shielding • hydrogen and ammonia production – Suitable for synthesis gas environments • metallurgy – For steel reheating furnaces and heat treatment zones Conclusion 1Cr25Ni20Si2 Half Round Straight Tube Shields from Ladhani Metal Corporation are engineered for performance in the harshest high-temperature environments. Their robust composition and resistance to thermal and chemical degradation make them essential for extending the life of straight tubes exposed to extreme flue gas conditions. For orders, custom fabrication, and technical support, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #halftubeshield #utypehalftubeshield #tubeshieldexporter

Half Round Tube Shield Ladhani Metal Corporation manufactures SS 304L Half Round Straight Tube Shields designed to protect straight sections of boiler and heat exchanger tubes from erosion, thermal fatigue, and corrosion caused by high-temperature gases and particulate matter. These shields are shaped to conform tightly to the outer tube surface, providing a protective barrier in high-wear zones. The SS 304L material offers excellent weldability and enhanced resistance to intergranular corrosion, making it ideal for shielding tubes in critical thermal environments. SS 304L Half Round Straight Tube Shield The SS 304L Half Round Straight Tube Shield is made from low-carbon austenitic stainless steel (304L), which minimizes carbide precipitation during welding and resists intergranular attack. This makes it especially useful for applications where welding is required during installation. The shield is installed over straight tube sections in boilers, superheaters, economizers, and steam processing equipment to extend tube life and reduce maintenance needs. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of SS 304L Half Round Straight Tube Shields, offering reliable tube protection solutions for industrial heating and energy systems. Material Grade SS 304L – Low-carbon variant of austenitic stainless steel with enhanced corrosion resistance and weldability. Chemical Composition of SS 304L • Carbon (C): ≤ 0.03% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 12.0% • Iron (Fe): Balance Applications: Ideal for systems involving welding, elevated temperatures, and corrosive steam or gas exposure. Uses • Shielding straight tubes in boilers and superheaters • Protection of economizer tubes and reheaters • Used in heat recovery steam generators (HRSGs) • Applied in steam reformers and chemical processing units • Effective in pulp and paper recovery boilers and refinery heaters Features • Intergranular corrosion resistance – Low carbon content prevents sensitization and weld decay • High-temperature strength – Maintains integrity under prolonged heat and gas exposure • Extended tube life – Minimizes erosion, slag buildup, and surface damage • Custom sizing – Available in various diameters, thicknesses, and lengths to match tube dimensions • Simple installation – Mounts securely using clamps, welding, or metal banding • Reduced maintenance – Lowers the need for frequent inspection and tube replacement Applications • power generation – Shields straight tube segments in LTSH and superheater zones from flue gas erosion • petrochemical plants – Protects tubes in high-humidity, chloride, and acidic processing environments • industrial boilers – Enhances tube longevity in zones prone to fly ash and slag contact • waste heat recovery systems – Extends operational life under thermal cycling and gas turbulence • marine boilers – Ideal for use in steam systems aboard ships exposed to saline and humid conditions Conclusion The SS 304L Half Round Straight Tube Shield by Ladhani Metal Corporation provides a robust and corrosion-resistant solution for protecting straight tube sections in thermal processing units. With its low carbon content, superior weldability, and durable performance in high-temperature environments, it is an optimal choice for industries focused on efficiency, reliability, and long service life. For custom fabrication, project-specific designs, or technical support, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields from Ladhani Metal Corporation are durable, precisely fabricated components used to protect boiler tubes from erosion, scaling, and corrosion caused by flue gas flow and particulate impact. Their half-round, semi-cylindrical structure is designed to conform closely to tube surfaces, especially in areas subjected to repeated thermal cycling or mechanical wear. These shields are extensively applied in boilers, heat exchangers, and waste heat recovery systems. 1Cr25Ni20Si2 Half Round Tube Shield for LTSH Tube The 1Cr25Ni20Si2 Half Round Tube Shield is manufactured from a high-performance chromium-nickel-silicon alloy designed for elevated-temperature service. With approximately 25% chromium, 20% nickel, and added silicon content, this alloy exhibits superior resistance to oxidation, thermal fatigue, and carburization. Its mechanical stability under high-temperature operation makes it a preferred material for protective applications in Low Temperature Superheater (LTSH) zones. The Low Temperature Superheater (LTSH) is a section in a boiler where saturated steam from the steam drum is superheated to a moderately higher temperature before entering the high-temperature superheater stages. Positioned in areas with relatively lower flue gas temperatures, the LTSH helps improve thermal efficiency and reduces moisture content in steam. Due to constant exposure to abrasive flue gases and ash, LTSH tubes are prone to wear and require protective shielding, such as half round tube shields, to extend service life. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of 1Cr25Ni20Si2 Half Round Tube Shields, offering high-performance shielding solutions tailored for harsh, heat-intensive industrial environments. Chemical Composition of 1Cr25Ni20Si2 – Chromium-Nickel-Silicon Heat-Resistant Steel • Carbon (C): ≤ 0.10% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): 1.5 – 2.5% • Chromium (Cr): 24.0 – 27.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Applications: Suitable for high-temperature steam systems, where resistance to flue gas corrosion, thermal oxidation, and mechanical fatigue is essential. Uses • Protects LTSH tubes in thermal power plants from scaling and soot-induced wear • Shields heat exchanger tubes from low-temperature corrosive gases and ash deposition • Used in boilers and HRSGs exposed to fluctuating temperature and combustion by-products • Suitable for high-wear areas in biomass boilers and incineration systems • Enhances operational life of reheater and superheater coil sections Features • High thermal stability – Withstands temperature fluctuations without structural deformation • Excellent oxidation and carburization resistance – Ideal for extended high-temperature exposure • Custom fit – Designed according to specific tube radii and coil geometries for accurate alignment • Reduced maintenance – Shields tubes from damage, minimizing downtime and repair costs • Versatile installation – Compatible with weld-on, clamp-on, and banding installation techniques • Long service life – Resistant to scaling and degradation in heat-intensive environments Applications • power generation boilers – Provides long-term protection for LTSH coils in flue gas zones • WHRBs and HRSGs – Used in low-temperature convection sections to counteract erosive gas flow • chemical and refining industries – Prevents corrosion in heat exchangers handling acidic media • marine steam systems – Protects low-temperature sections exposed to salt-laden air and gases • waste-to-energy plants – Shields boiler tubing from high-volume particulate streams Conclusion The 1Cr25Ni20Si2 Half Round Tube Shield for LTSH Tube by Ladhani Metal Corporation – manufacturer, supplier, and exporter – is a high-performance component designed for superior protection of boiler tubes in corrosive and thermally aggressive environments. It ensures durability, thermal resistance, and long-term reliability in LTSH and similar service applications. For specifications, custom fabrication, or bulk orders, contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered components designed to protect boiler tubes, superheaters, and heat exchanger coils from erosion, scaling, high-temperature oxidation, and mechanical wear. These shields are widely used in thermal power plants, petrochemical systems, and process industries where tubes are exposed to harsh operating conditions such as high-velocity flue gases, slag, and thermal cycling. Their semi-cylindrical shape allows for easy installation over both straight and curved tube surfaces without system disassembly. SS 410 U Type Inner Half Round Tube Shield The SS 410 U Type Inner Half Round Tube Shield is manufactured from martensitic stainless steel grade 410, which offers good corrosion resistance, excellent wear resistance, and moderate high-temperature strength. The inner U-type design is specifically configured to cover the internal arc of U-bend tubes, an area especially prone to erosion caused by turbulence, thermal gradients, and high-velocity gas impingement. SS 410 provides a hard, durable barrier against mechanical and thermal stress in industrial heat transfer equipment. • Inner U Type Half Round Tube Shield – Protects the internal bend of U-bend tubes from erosion, slag buildup, and high-temperature wear. Ladhani Metal Corporation is a dependable manufacturer, supplier, and exporter of SS 410 U Type Inner Half Round Tube Shields, offering cost-effective and durable protection solutions for critical tube components in high-temperature service environments. Chemical Composition of SS 410 – Martensitic Stainless Steel • Carbon (C): 0.08 – 0.15% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 11.5 – 13.5% • Nickel (Ni): ≤ 0.75% • Iron (Fe): Balance Applications: Best suited for moderate to high-temperature environments where abrasion resistance, mechanical strength, and oxidation resistance are important. Uses • Inner arc shielding of U-bend tubes in power plant boilers and superheaters exposed to flue gas turbulence • Protection of return bends in WHRBs and HRSGs where scaling and erosion are common • Applied in curved tube sections in steam reformers, furnaces, and heat exchangers • Ideal for use in chemical, cement, and metallurgical plants with abrasive flue gas and slag exposure • Suitable for systems requiring enhanced wear resistance under cyclic thermal loading Features • Good high-temperature oxidation resistance – Performs well in oxidizing atmospheres up to 650°C • Inner bend protection – Focused coverage for the area most affected by turbulent gas flow and erosion • Wear resistance – Offers excellent surface hardness and mechanical strength for long-term use • Secure fit – Custom-manufactured to match the tube’s radius and diameter for effective shielding • Quick installation – Can be fixed using clamp-on, banding, or welding techniques depending on system requirements • Cost-effective performance – Provides a durable and affordable solution for erosion and heat protection Applications • thermal power plants – Shields inner U-bends in boiler and superheater sections from erosion and slag impact • waste heat recovery systems – Used in WHRBs and HRSGs to protect internal tube arcs from scale and corrosion • petrochemical facilities – Installed in curved tube coils and return bends exposed to acidic and abrasive gas streams • industrial furnaces and reformers – Suitable for inner arc coverage in high-temperature gas flow zones • cement and chemical plants – Defends against mechanical wear and heat stress in return tube bends Conclusion The SS 410 U Type Inner Half Round Tube Shield by Ladhani Metal Corporation – manufacturer, supplier, and exporter – is a durable and cost-efficient solution for shielding the inner arc of U-bend tubes in thermally and mechanically demanding environments. Its martensitic structure and wear-resistant properties make it a reliable choice for protecting tube surfaces from erosion, scaling, and heat-induced damage in power and process applications. For custom orders, technical support, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-fabricated protective components used to extend the life of boiler, superheater, and heat exchanger tubes exposed to extreme heat, flue gas erosion, scaling, and corrosive environments. These shields are installed on curved or straight sections of tubes, helping to prevent mechanical wear and oxidation damage while ensuring reliable performance in thermal power, petrochemical, and industrial heat recovery systems. The half-round structure offers a secure fit and easy installation, eliminating the need for system disassembly. SS 310 U Type Inner Half Round Tube Shield The SS 310 U Type Inner Half Round Tube Shield is made from high-temperature austenitic stainless steel grade 310, which contains elevated levels of chromium and nickel. This alloy provides excellent resistance to oxidation, scaling, and thermal fatigue at service temperatures up to 1100°C. The inner U-type configuration is specifically designed to shield the inner curvature of U-bend tubes, which are susceptible to accelerated degradation due to turbulence, corrosive combustion gases, and localized heat concentration. • Inner U Type Half Round Tube Shield – Covers the inside arc of U-bend tubes, offering robust protection against turbulent flow erosion, slag buildup, and high-temperature scaling. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of SS 310 U Type Inner Half Round Tube Shields, offering custom-built solutions for high-temperature tube protection in demanding process and energy systems. Chemical Composition of SS 310 – Austenitic High-Temperature Stainless Steel • Carbon (C): ≤ 0.25% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.50% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Applications: Ideal for high-temperature and oxidizing environments such as boilers, reformers, kilns, and heat exchangers where scaling, corrosion, and thermal stress are prevalent. Uses • Installed on inner arcs of U-bend tubes in power plant superheaters and reheaters exposed to extreme temperatures • Applied in return bends of steam reformers and heat exchangers handling oxidizing and acidic gases • Shields inner curves in waste heat recovery boilers (WHRBs) and heat recovery steam generators (HRSGs) • Used in chemical process units, incinerators, and high-temperature furnace systems • Suitable for curved tube coils in metallurgical, cement, and process gas heating applications Features • Excellent oxidation resistance – Performs at temperatures up to 1100°C without significant scaling • Inner arc protection – Guards against erosion and heat damage caused by turbulent flue gas flow • High structural stability – Maintains strength and surface integrity under thermal cycling and load conditions • Precision fit – Custom-engineered to match tube diameter and bend radius for secure, long-lasting placement • Easy installation – Can be attached using stainless bands, clamps, or tack welding methods • Extended service life – Minimizes tube replacement and reduces maintenance frequency in high-heat systems Applications • thermal and power plants – Protects U-bend tubes in superheaters from flame impingement and slag attack • petrochemical industries – Shields return bends in reformers and exchangers from high-temperature gas streams • waste heat recovery – Used in WHRBs and HRSGs to defend tube bends from scaling and erosion • high-temperature process plants – Provides inner arc coverage in systems handling oxidizing combustion byproducts • furnace systems – Installed in curved tube coils subjected to high radiant heat and thermal cycling Conclusion The SS 310 U Type Inner Half Round Tube Shield by Ladhani Metal Corporation – manufacturer, supplier, and exporter – is a high-performance shielding solution for protecting the inner bend of tubes operating under intense heat and oxidation stress. Designed for precise fitment and long-term durability, this shield is ideal for boilers, reformers, and heat exchangers in power generation, petrochemical, and industrial heating systems. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered solutions designed to protect boiler, superheater, and heat exchanger tubes from erosion, scaling, slag buildup, and high-temperature corrosion. These shields are widely used in systems that operate under extreme thermal and mechanical stress, particularly in industries such as power generation, petrochemical processing, and waste heat recovery. The half-round design ensures easy and secure installation over straight or curved tube surfaces, helping to extend service life and reduce operational downtime. SS 304 U Type Inner Half Round Tube Shield The SS 304 U Type Inner Half Round Tube Shield is manufactured from austenitic stainless steel grade 304, which contains chromium and nickel as its primary alloying elements. This grade offers a combination of good corrosion resistance, oxidation resistance, and mechanical strength. The inner U-type configuration is specifically designed to cover the inner arc of U-bend tubes in boilers and heat exchangers, an area that typically experiences accelerated wear due to flue gas turbulence, scaling, and heat stress. • Inner U Type Half Round Tube Shield – Shields the internal curvature of U-bend tubes from corrosion, turbulent flow-induced erosion, and thermal scaling. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of SS 304 U Type Inner Half Round Tube Shields, delivering durable and cost-effective shielding for critical industrial applications. Chemical Composition of SS 304 – Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 11.0% • Iron (Fe): Balance Applications: Ideally suited for clean to mildly corrosive environments, including thermal and chemical plants where moderate oxidation and corrosion resistance is needed under elevated temperatures. Uses • Inner surface protection for U-bend tubes in superheaters and reheaters exposed to turbulent gas flow • Applied in return bends of waste heat recovery boilers (WHRBs) and HRSGs • Installed in curved sections of heat exchangers, steam reformers, and process heaters • Suitable for flue gas ducts, evaporators, and condensers with moderate thermal cycling • Used in chemical and refining systems where steam and mildly acidic gases are present Features • Good corrosion and oxidation resistance – Suitable for a broad range of service conditions • Inner arc coverage – Protects the inner bend area from scaling and erosion caused by turbulent flue gases • Durable performance – Offers dependable protection at temperatures up to 870°C • Precise fit – Fabricated to match the exact bend radius and tube dimensions for a secure installation • Easy mounting – Can be installed using clamps, stainless steel banding, or tack welding • Cost-effective solution – Provides a balance of performance, longevity, and affordability for standard industrial applications Applications • thermal power plants – Used in inner U-bends of superheaters and economizers to minimize scaling and erosion • petrochemical industries – Shields inside tube curves exposed to combustion gases and steam • waste heat systems – Protects internal arcs of curved tubes in WHRBs and HRSGs from slag and heat damage • chemical and refinery plants – Provides resistance against moderate levels of corrosion in return bends • industrial heating systems – Ensures extended tube life in furnaces, heat exchangers, and flue gas systems Conclusion The SS 304 U Type Inner Half Round Tube Shield by Ladhani Metal Corporation – manufacturer, supplier, and exporter – is a practical and reliable solution for protecting the inner arc of U-bend tubes in moderate to high-temperature industrial environments. With its balance of corrosion resistance, mechanical durability, and ease of installation, this shield is ideal for a wide range of power and process industry applications. For technical consultation, custom sizes, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered components used to protect boiler and heat exchanger tubes from erosion, scaling, and high-temperature corrosion. These shields are widely applied in industrial systems exposed to thermal cycling, aggressive gases, and particulate flow. Their half-round shape allows for simple and secure installation over straight or curved tube surfaces, extending tube life and reducing maintenance needs. SS 304L U Type Outer Half Round Tube Shield The SS 304L U Type Outer Half Round Tube Shield is manufactured from low-carbon austenitic stainless steel, SS 304L, offering enhanced weldability and resistance to intergranular corrosion. This shield is specifically designed to protect the outer curvature of U-bend tubes in high-temperature and moderately corrosive environments such as boilers, superheaters, and heat exchangers. The outer U-type configuration focuses on shielding the most exposed area of return bends from flue gas erosion, slag impact, and thermal oxidation. • Outer U Type Half Round Tube Shield – Provides targeted protection to the external arc of U-bend tubes, reducing surface degradation caused by hot gas streams and mechanical wear. Ladhani Metal Corporation supplies SS 304L U Type Outer Half Round Tube Shields with precision-engineered profiles to ensure long-term performance and durability in harsh industrial conditions. Chemical Composition of SS 304L – Low-Carbon Austenitic Stainless Steel • Carbon (C): ≤ 0.035% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 12.0% • Iron (Fe): Balance Applications: Well-suited for moderately corrosive, high-temperature environments where resistance to weld decay and oxidation is required. Uses • Protection of outer U-bend surfaces in superheaters and reheaters in thermal power generation systems • Shielding external arcs in heat exchangers and condensers in the chemical and petrochemical industries • Outer bend coverage in waste heat recovery boilers (WHRBs) and HRSGs exposed to flue gases and particulate flow • Used in marine, food-grade, and process steam systems where chloride resistance and cleanliness are important • Ideal for systems requiring excellent weldability and post-fabrication corrosion resistance Features • Excellent corrosion resistance – Low carbon content improves resistance to intergranular corrosion after welding or high-heat exposure. • Outer U-bend protection – Specifically shaped to guard the outer surface of U-bend tubes from high-temperature gas flow and slag contact. • High-temperature performance – Performs reliably in temperatures up to 870°C, resisting scale formation and oxidation. • Custom fit – Engineered to precisely match tube diameters and bend radii for a snug and stable fit without displacement. • Easy to install – Can be quickly mounted using clamps, stainless banding, or tack welds without requiring system downtime or disassembly. • Long service life – Withstands thermal cycling and corrosive gas exposure to minimize tube damage and maintenance intervals. Applications • power plants – Used in superheaters and reheaters for protecting the outer arcs of return bends from flue gas and heat-related scaling. • chemical processing – Shields tube surfaces in exchangers and preheaters that experience moderate chemical attack and thermal fatigue. • WHRBs and HRSGs – Installed on outer curves of U-bend tubes to prevent erosion and reduce downtime in heat recovery systems. • marine and coastal facilities – Suitable for salt-laden environments where chloride resistance is essential for sustained performance. • food, beverage, and clean process industries – Provides hygienic protection for tube bends in steam and thermal processing systems. Conclusion The SS 304L U Type Outer Half Round Tube Shield by Ladhani Metal Corporation offers dependable protection for the most vulnerable outer surfaces of U-bend tubes in high-temperature and moderately corrosive applications. With its low-carbon alloy composition, it combines superior corrosion resistance with excellent weldability, making it ideal for power generation, petrochemical, marine, and process industries. Customizable to your system’s specifications, this shield ensures long-lasting performance, reduced maintenance, and improved system reliability. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation.