Thank you for writing to us. One of our executive will reach back to you through your submitted medium. In case there’s an urgency, feel free to connect over WhatsApp for faster response.
Prefer calling? Dial +919029362692 (International callers) or +919029362692 (Indian callers).
Platinum Coated Titanium Mesh Anode is a high-performance insoluble anode designed for electrochemical applications requiring excellent conductivity, superior corrosion resistance, and long service life. Manufactured using a titanium mesh substrate coated with a thin layer of platinum, this anode provides outstanding dimensional stability and consistent electrochemical performance in aggressive environments.
The titanium base material is typically Grade 1 or Grade 2 titanium, offering excellent corrosion resistance and mechanical strength. The platinum coating acts as the active catalytic surface, delivering high efficiency, low overpotential, and excellent resistance to oxidation and chemical attack in acidic and chloride-containing electrolytes.
Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of Platinum Coated Titanium Mesh Anodes, supplied with precise coating thickness control, uniform surface distribution, and strict quality inspection.
Forms of Supply (as per requirement):
Expanded titanium mesh anodes
Welded mesh anodes
Custom fabricated mesh panels
Anode baskets and cylindrical mesh anodes
Hook type mesh anodes
Rectangular and circular mesh plates
Construction Details:
• Substrate – Commercially pure titanium (Grade 1 / Grade 2)
• Coating – Platinum layer (electrodeposited or thermally applied)
• Mesh Type – Expanded mesh or woven mesh
• Coating Thickness – Typically 0.5 to 5 microns (as per application)
• Electrical Connection – Titanium rod or strip welded to mesh
Technical Characteristics:
• Excellent electrical conductivity
• High catalytic activity
• Very low consumption rate
• Superior corrosion resistance in acidic and alkaline media
• Long operational life
• Dimensionally stable under continuous current load
Typical Operating Parameters:
• Current Density: Up to 10,000 A/m² (depending on electrolyte)
• Operating Temperature: Up to 80–90°C (application dependent)
• Electrolytes: Acidic, alkaline, and chloride solutions
• Coating Life: Long service life with minimal degradation
Key Features:
• Uniform platinum coating for consistent performance
• Strong adhesion between platinum and titanium substrate
• High mechanical strength and lightweight structure
• Low maintenance and reduced replacement cost
• Suitable for continuous industrial operation
Material Characteristics:
Platinum Coated Titanium Mesh Anodes combine the corrosion resistance of titanium with the excellent catalytic and conductive properties of platinum. The mesh structure provides increased surface area, improved electrolyte flow, and efficient gas release during electrolysis, ensuring stable and efficient electrochemical reactions.
Applications:
• Electroplating (gold, silver, copper, nickel, chromium)
• Electrochlorination systems
• Cathodic protection systems
• Electrolytic recovery systems
• Water treatment and disinfection
• PCB and electronics manufacturing
Conclusion:
Ladhani Metal Corporation supplies premium quality Platinum Coated Titanium Mesh Anodes manufactured to precise technical standards and customer specifications. With excellent conductivity, superior corrosion resistance, and long operational life, platinum coated titanium mesh anodes are ideal for demanding electrochemical and industrial applications. For customized sizes, coating thickness, or technical specifications, contact Ladhani Metal Corporation.
#PlatinumCoatedTitanium #TitaniumMeshAnode #PlatinumAnode #MMOAnode #ElectrolysisAnode #ElectrochemicalAnode #IndustrialAnodes #TitaniumAnode #PreciousMetalCoating #ElectroplatingAnode #WaterTreatmentAnode #ChlorAlkaliAnode #CathodicProtection #ElectrochemicalEngineering #CorrosionResistance #HighPerformanceAnode #DimensionallyStableAnode #DSAAnode #Electrowinning #Electrorefining #MetalFinishingIndustry #ElectrodesManufacturer #IndustrialElectrodes #TitaniumFabrication #PlatinumPlated #AnodeTechnology #ChemicalProcessing #ElectrolyticCell #ConductiveMaterials #AdvancedMaterials #PowerGenerationComponents #IndustrialMesh #CustomAnodes #ElectrochemicalSolutions #MarineCorrosionProtection #WastewaterTreatment #HydrogenProduction #ElectrolysisSystem #PlatinumCoating #LongLifeAnode #HighDurability #IndustrialApplications #ProcessEngineering #HeavyDutyAnode #AnodeSupplier #AnodeExporter #ElectrodeSolutions #LadhaniMetals
ladhani metal corporation is supplier and exporter of MIL-S-862B 321 sheet , plate , coil , flat bar , circular plate , plate flanges , farma , laser cutting design sheet , waterjet cutting design sheet.MIL-S-862B 321 is the basic austenitic 18/8 steel stabilised by Titanium or additions. These grades are used because they are not sensitive to intergranular corrosion after heating within the carbide precipitation range of 425-850°C.MIL-S-862B 321 is the grade of choice for applications in the temperature range of up to about 900°C, combining high strength, resistance to scaling and phase stability with resistance to subsequent aqueous corrosion.
Cold Bending : It has excellent cold working properties and cold bending can generally be carried out without too much difficulty.
Hot Bending : Hot bending should be performed at 950oC - 1100Oc.
Corrosion Resistance : it similar resistance to general corrosion in most media as 304, but not as good as 316.
Stress Corrosion Cracking : it has similar resistance to stress corrosion cracking as 304, but not as good as 316.
Pitting Corrosion / Crevice Corrosion : It has similar resistance to pitting and crevice corrosion as 304, but not as good as 316.
Intergranular Corrosion : it has better resistance to intergranular corrosion than most of the standard 300 grades other than the low carbon types 304L, 316L and 317L due to its titanium content.N.B.
Forging : Heat uniformly to 1150oC - 1200oC
Machining: It is more difficult to machine than most of the standard austenitic stainless steels, due to its titanium addition.
Our Domestic reach is unlimited and we supply to this following cities Ahmedabad, Amritsar, Aurangabad, Bangalore, Bhopal, Chandigarh, Chennai, Coimbatore, Dhanbad, Faridabad, Ghaziabad, Guwahati, Gwalior, Howrah, Hyderabad, Indore, Jabalpur, Jaipur, Jodhpur, Kanpur, Kolkata, Kota, Lucknow, Ludhiana, Madurai, Meerut, Mumbai, Nagpur, Nashik, Navi Mumbai, New Delhi, Patna, Pune, Raipur, Rajkot, Ranchi, Solapur, Srinagar, Surat, Thane, Vadodara, Varanasi, Vijayawada, Visakhapatnam, Hubballi, Tiruchirappalli, Bareilly, Moradabad, Mysore, Gurgaon, Aligarh, Jalandhar, Bhubaneswar
We export to following Countries:
Russia, Canada, United States, China, Brazil, Australia, Argentina, Kazakhstan, Algeria, Denmark, Saudi Arabia, Mexico, Indonesia, Iran, Mongolia, Peru, South Africa, Colombia, Ethiopia, Bolivia, Egypt, Venezuela, Turkey, Chile, Myanmar, France, Ukraine, Madagascar, Botswana, Kenya, Thailand, Spain, Sweden, Uzbekistan, Morocco, Paraguay, Zimbabwe, Norway, Japan, Germany, Republic of the Congo, Finland, Vietnam, Malaysia, Poland, Oman, Italy, Philippines, Ecuador, New Zealand, United Kingdom, Guinea, Uganda, Nepal, Bangladesh
ladhani metal corporation is supplier and exporter of AISI 321 sheet , plate , coil , flat bar , circular plate , plate flanges , farma , laser cutting design sheet , waterjet cutting design sheet.AISI 321 is the basic austenitic 18/8 steel stabilised by Titanium or additions. These grades are used because they are not sensitive to intergranular corrosion after heating within the carbide precipitation range of 425-850°C.AISI 321 is the grade of choice for applications in the temperature range of up to about 900°C, combining high strength, resistance to scaling and phase stability with resistance to subsequent aqueous corrosion.
Cold Bending : It has excellent cold working properties and cold bending can generally be carried out without too much difficulty.
Hot Bending : Hot bending should be performed at 950oC - 1100Oc.
Corrosion Resistance : it similar resistance to general corrosion in most media as 304, but not as good as 316.
Stress Corrosion Cracking : it has similar resistance to stress corrosion cracking as 304, but not as good as 316.
Pitting Corrosion / Crevice Corrosion : It has similar resistance to pitting and crevice corrosion as 304, but not as good as 316.
Intergranular Corrosion : it has better resistance to intergranular corrosion than most of the standard 300 grades other than the low carbon types 304L, 316L and 317L due to its titanium content.N.B.
Forging : Heat uniformly to 1150oC - 1200oC
Machining: It is more difficult to machine than most of the standard austenitic stainless steels, due to its titanium addition.
Our Domestic reach is unlimited and we supply to this following cities Ahmedabad, Amritsar, Aurangabad, Bangalore, Bhopal, Chandigarh, Chennai, Coimbatore, Dhanbad, Faridabad, Ghaziabad, Guwahati, Gwalior, Howrah, Hyderabad, Indore, Jabalpur, Jaipur, Jodhpur, Kanpur, Kolkata, Kota, Lucknow, Ludhiana, Madurai, Meerut, Mumbai, Nagpur, Nashik, Navi Mumbai, New Delhi, Patna, Pune, Raipur, Rajkot, Ranchi, Solapur, Srinagar, Surat, Thane, Vadodara, Varanasi, Vijayawada, Visakhapatnam, Hubballi, Tiruchirappalli, Bareilly, Moradabad, Mysore, Gurgaon, Aligarh, Jalandhar, Bhubaneswar
We export to following Countries:
Russia, Canada, United States, China, Brazil, Australia, Argentina, Kazakhstan, Algeria, Denmark, Saudi Arabia, Mexico, Indonesia, Iran, Mongolia, Peru, South Africa, Colombia, Ethiopia, Bolivia, Egypt, Venezuela, Turkey, Chile, Myanmar, France, Ukraine, Madagascar, Botswana, Kenya, Thailand, Spain, Sweden, Uzbekistan, Morocco, Paraguay, Zimbabwe, Norway, Japan, Germany, Republic of the Congo, Finland, Vietnam, Malaysia, Poland, Oman, Italy, Philippines, Ecuador, New Zealand, United Kingdom, Guinea, Uganda, Nepal, Bangladesh.