Ladhani Metal Corporation offers 1Cr18Ni9Ti Outer Half Round 90 Degree Bend Tube Shields designed to protect the outer curvature of U-bends and 90-degree tube turns in boilers, heat exchangers, superheaters, and reheaters. Manufactured from the austenitic stainless steel grade 1Cr18Ni9Ti (equivalent to AISI 321), these shields provide excellent corrosion resistance, high-temperature strength, and resistance to intergranular corrosion. The semi-cylindrical geometry is precision-engineered to conform to the return bends of tubes, offering reliable protection from erosion due to flue gas velocity, soot blower blasts, and ash impingement. 1Cr18Ni9Ti shields are commonly used in high-temperature steam generation systems, including power plants and industrial thermal processing units, where durability under oxidizing and slightly corrosive conditions is critical. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of 1Cr18Ni9Ti Outer Half Round 90 Degree Bend Tube Shields, providing tailored solutions to meet specific plant configurations and thermal requirements. 1Cr18Ni9Ti Grade Chemical Composition – Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 17.0 – 19.0% • Nickel (Ni): 9.0 – 12.0% • Titanium (Ti): ≥ 5 x C content • Iron (Fe): Balance Uses • Protection of 90-degree return bends in superheaters and reheaters • Suitable for HRSG and WHRB applications in gas turbine and industrial waste heat recovery • Shields tube bends from scaling, oxidation, and erosive flue gas flow • Applied in furnaces and process heaters requiring long-term thermal stability Features • Superior corrosion resistance – Performs reliably in oxidizing and mildly corrosive environments • High thermal stability – Maintains structural integrity in elevated temperature conditions • Intergranular corrosion resistance – Titanium stabilization prevents carbide precipitation • Accurate fit – Formed to match specific bend radii and tube sizes for maximum protection • Easy installation – Supports clamping, welding, or banding as per site requirements • Available variants – Offered in multiple lengths, wall thicknesses, and diameters for precise application Applications • Power generation – Protects boiler tube bends in high-temperature steam lines • Petrochemical industries – Ensures thermal integrity in fired heaters and reformers • Industrial boilers – Guards against erosion and scaling in heat recovery systems • Cement and metallurgical plants – Used in tube bends of heat exchangers and gas coolers Conclusion The 1Cr18Ni9Ti Outer Half Round 90 Degree Bend Tube Shield by Ladhani Metal Corporation delivers high-performance protection for boiler and furnace tube bends operating under high heat and oxidizing conditions. With excellent corrosion resistance, thermal reliability, and formability, it is a robust and long-lasting solution for demanding environments. For customized configurations, technical assistance, or material consultation, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #halftubeshield #utypehalftubeshield #tubeshieldexporter

Ladhani Metal Corporation offers SS 430 Outer Half Round 90 Degree Bend Tube Shields designed to protect the outer arc of U-bend and 90-degree curved tubes in boilers, heat exchangers, superheaters, and reheaters. Manufactured from ferritic stainless steel grade SS 430, these shields provide good corrosion resistance, excellent formability, and thermal stability in moderately aggressive service environments. SS 430 is particularly suitable for applications where resistance to oxidation and surface scaling is needed without exposure to highly corrosive agents. The semi-cylindrical profile is precision-formed to match the outer curvature of return tube bends, offering a physical barrier against soot-blower impact, flue gas erosion, and ash particle wear. SS 430 shields are commonly used in utility and industrial boilers operating under dry, mildly corrosive, and thermally demanding conditions. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of SS 430 Outer Half Round 90 Degree Bend Tube Shields, offering custom configurations to suit specific plant layouts and service requirements. SS 430 Grade Chemical Composition – Ferritic Stainless Steel • Carbon (C): ≤ 0.12% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): ≤ 0.75% • Iron (Fe): Balance Applications: Ideal for power plants, WHRBs, HRSGs, and general industrial systems requiring protection for tube bends in dry heat and oxidizing environments. Uses • Shielding outer 90-degree bends in superheaters and reheaters • Applied in WHRBs and HRSG return coils exposed to dry flue gas • Protects against moderate erosion and oxidation in utility boilers • Suitable for curved tubes in industrial furnaces and heat recovery units Features • Cost-effective protection – Combines durability with economical material choice • Oxidation resistance – Performs well in clean flue gas and dry heat exposure • Thermal reliability – Withstands repeated heating cycles without deformation • Custom-fit geometry – Formed to match exact bend radius for tight coverage • Versatile installation – Can be clamped, banded, or tack welded as needed • Multiple sizes – Offered in a variety of thicknesses, lengths, and radii Applications • Thermal power stations – Shields steam lines and return bends from surface scaling • Waste heat boilers – Guards tube bends in clean gas recovery systems • Process heaters – Used in less corrosive gas heating environments • Cement and food processing industries – Protects tube curves from oxidation Conclusion The SS 430 Outer Half Round 90 Degree Bend Tube Shield by Ladhani Metal Corporation provides durable and cost-efficient protection for tube bends exposed to dry heat, oxidation, and moderate wear. With good formability and thermal performance, these shields are ideal for systems where corrosion levels are controlled but mechanical shielding is essential. For custom sizing, material selection, or technical specifications, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #halftubeshield #utypehalftubeshield #tubeshieldexporter

Half Round Tube Shield Ladhani Metal Corporation manufactures SS 410 Half Round Straight Tube Shields to offer cost-effective protection for boiler and heat exchanger tubes in moderate temperature and corrosive environments. SS 410 is a martensitic stainless steel that provides good corrosion resistance, mechanical strength, and wear resistance, making it suitable for shielding straight tubes exposed to flue gas erosion, ash deposits, and mild chemical exposure. SS 410 Half Round Straight Tube Shield The SS 410 Half Round Straight Tube Shield is designed to fit over the external surface of straight tubes, acting as a barrier against abrasive particles, high-velocity flue gases, and mechanical wear. It is widely used in power plants, waste heat recovery systems, and steam processing units where cost-effective protection is needed for tubes operating at medium temperatures. The material offers ease of fabrication and reliable resistance to oxidation up to 650°C. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of SS 410 Half Round Straight Tube Shields, delivering durable thermal protection for industrial piping systems. Material Grade SS 410 – Martensitic stainless steel known for its hardness, oxidation resistance, and moderate corrosion protection. Chemical Composition of SS 410 • Carbon (C): 0.08 – 0.15% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 11.5 – 13.5% • Iron (Fe): Balance Applications: Suitable for environments involving dry flue gases, fly ash, and light acidic fumes; commonly used in economizers and low-temperature steam sections. Uses • Straight tube protection in boilers and economizers • Installed in air preheaters and low-temperature superheaters • Applied in WHRBs to guard tubes from ash and erosion • Used in industrial steam systems with mild corrosion risk • Shields tubes in pulp, paper, and food processing units Features • Good oxidation resistance – Up to moderate temperatures (~650°C) • High hardness – Offers resistance against flue gas abrasion and ash impact • Cost-effective – Economical choice for medium-duty service • Easy to fabricate and weld – Suitable for various attachment methods • Customizable – Available in different sizes, lengths, and thicknesses • Enhances tube durability – Reduces wear and minimizes shutdowns Applications • thermal power plants – Used in low-heat sections for erosion protection • steam processing – Protects steam-carrying tubes from scale and impact • waste heat recovery units – Resists abrasive exhaust gases and particulate matter • cement and steel plants – Applied in dust-prone, dry gas environments • food and chemical industries – Suitable for non-aggressive process gas shielding Conclusion The SS 410 Half Round Straight Tube Shield from Ladhani Metal Corporation is a practical and robust solution for extending the life of tubes operating under dry, abrasive, and moderately corrosive service conditions. Its hardness and heat resistance make it ideal for protecting straight tube sections in a wide range of industrial systems. For standard and custom configurations, contact Ladhani Metal Corporation for technical consultation and orders.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are high-strength protective components used to shield boiler tubes, superheaters, and heat exchanger coils from ash impact, flue gas erosion, scaling, and corrosion. These shields are commonly used in thermal power plants, steam generating systems, and industrial boilers to protect tube surfaces and reduce wear in critical heat transfer zones. Their half-round profile is designed for easy installation and secure fitment over curved or straight tubes exposed to mechanical or thermal stress. SS 420 Half Round Tube Shield for LTSH Tube The SS 420 Half Round Tube Shield is manufactured from martensitic stainless steel grade 420, which is known for its high hardness, good oxidation resistance, and moderate corrosion protection. This material provides excellent wear resistance in abrasive and dry flue gas environments. It is particularly suitable for Low Temperature Superheater (LTSH) applications, where tubes are exposed to fly ash erosion, gas turbulence, and mechanical abrasion at relatively lower temperatures. SS 420 is often used where durability and strength are more critical than corrosion resistance alone. The Low Temperature Superheater (LTSH) is a section in a boiler where saturated steam from the steam drum is superheated to a moderately higher temperature before entering the high-temperature superheater stages. Positioned in areas with relatively lower flue gas temperatures, the LTSH helps improve thermal efficiency and reduces moisture content in steam. Due to constant exposure to abrasive flue gases and ash, LTSH tubes are prone to wear and require protective shielding, such as half round tube shields, to extend service life. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of SS 420 Half Round Tube Shields for LTSH applications, offering reliable protection where mechanical wear and gas erosion are of primary concern. Chemical Composition of SS 420 – Martensitic Stainless Steel • Carbon (C): 0.15 – 0.40% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 12.0 – 14.0% • Iron (Fe): Balance Applications: Best suited for dry ash, solid particulate flow, and mildly oxidizing environments in low-temperature superheater sections of boilers and industrial furnaces. Uses • Installed on LTSH tubes to protect from fly ash abrasion and soot erosion in power boilers • Shields return bends and tube banks in HRSGs and WHRBs exposed to turbulent flue gases • Used in biomass and coal-fired boilers to prevent mechanical wear and scaling on heat transfer tubes • Suitable for zones with high solid particle velocity and moderate corrosion risk • Effective in industrial and utility boilers that operate with abrasive fuels or in dry environments Features • High surface hardness – Excellent resistance to erosion, impact, and abrasion • Moderate oxidation resistance – Performs well in clean, oxidizing gas atmospheres • Precision fitment – Custom-shaped to match tube radius and curvature for secure shielding • Simple installation – Compatible with welding, clamping, or banding methods • Cost-efficient durability – Provides long service life in mechanical wear zones • Offered in varied lengths, thicknesses, and tube diameters based on application needs Applications • thermal power plants – Installed on LTSH tubes to minimize erosion and extend operational life • waste heat recovery units – Protects lower temperature coils from particulate-laden gas streams • coal-fired boilers – Shields convection sections exposed to ash and fly particles • steam generation systems – Guards heat transfer surfaces in dry, abrasive environments • biomass plants – Prevents wear from ash and unburned particulates in combustion zones Conclusion The SS 420 Half Round Tube Shield for LTSH Tube by Ladhani Metal Corporation – manufacturer, supplier, and exporter – offers strong mechanical protection and erosion resistance for superheater and boiler tubes operating in low-temperature, abrasive environments. Designed for durability and precision fit, it enhances tube longevity and system performance in thermal applications where particulate damage is a concern. For product specifications, custom sizes, or technical assistance, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-formed protective components used to shield boiler tubes, superheaters, and heat exchangers from erosion, scaling, ash impact, and corrosion. Commonly applied in power plants, waste heat recovery units, and industrial heating systems, these shields help prolong tube service life and maintain consistent thermal performance. Their half-round design ensures easy installation over exposed tube surfaces and provides dependable coverage in harsh gas flow zones. SS 310 Half Round Tube Shield for LTSH Tube The SS 310 Half Round Tube Shield is fabricated from high-temperature austenitic stainless steel grade 310. Known for its high chromium and nickel content, SS 310 offers excellent oxidation resistance, superior thermal stability, and strength under prolonged heat exposure. This makes it ideal for Low Temperature Superheater (LTSH) applications, where tubes are vulnerable to erosion, ash buildup, and gas-phase corrosion. The shield is precisely shaped to match the outer curvature of LTSH tubes, enabling effective surface protection in relatively low-temperature flue gas environments. The Low Temperature Superheater (LTSH) is a section in a boiler where saturated steam from the steam drum is superheated to a moderately higher temperature before entering the high-temperature superheater stages. Positioned in areas with relatively lower flue gas temperatures, the LTSH helps improve thermal efficiency and reduces moisture content in steam. Due to constant exposure to abrasive flue gases and ash, LTSH tubes are prone to wear and require protective shielding, such as half round tube shields, to extend service life. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of SS 310 Half Round Tube Shields for LTSH tubes, offering high-performance protection in demanding thermal conditions. Chemical Composition of SS 310 – Austenitic Stainless Steel • Carbon (C): ≤ 0.25% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.50% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Applications: Designed for low-temperature superheater zones and other areas with moderate heat and flue gas exposure, where oxidation resistance and strength are required. Uses • Installed on LTSH tubes to protect against soot erosion, scaling, and ash particle wear • Applied in convection zones of power boilers and economizers exposed to moderate heat and flue gases • Suitable for WHRBs and HRSGs where return tube surfaces are vulnerable to thermal degradation • Used in process heaters and chemical boilers operating under oxidizing conditions • Effective in gas-fired and coal-fired systems where moisture and ash corrosion is common Features • Excellent oxidation resistance – Performs well in oxidizing and mildly corrosive gas atmospheres • High-temperature strength – Resists deformation and scaling under continuous heat exposure • Custom-fit design – Precisely fabricated to match specific LTSH tube sizes and geometries • Easy installation – Can be attached using clamp-on, banding, or tack welding methods • Reduces maintenance – Protects high-wear areas from erosion and thermal stress • Available in various lengths, wall thicknesses, and radii per design requirements Applications • thermal power stations – Applied on LTSH tube surfaces to resist flue gas and ash-induced damage • waste heat recovery systems – Used in lower temperature zones of WHRBs to prevent erosion • petrochemical processing – Shields tube surfaces in heaters and exchangers from scaling • utility boilers – Protects steam superheater tubes in moderate heat and corrosive conditions • industrial steam systems – Enhances tube durability in superheaters and economizer banks Conclusion The SS 310 Half Round Tube Shield for LTSH Tube by Ladhani Metal Corporation – manufacturer, supplier, and exporter – is a reliable, heat-resistant solution for protecting superheater tubes in flue gas environments with moderate temperatures. Its superior resistance to scaling, oxidation, and erosion makes it ideal for maintaining the efficiency and longevity of boiler systems operating in low-temperature zones. For custom sizes, specifications, or technical assistance, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are essential components used to protect heat exchanger tubes, boiler coils, and superheater assemblies from erosion, scaling, slag buildup, and high-temperature corrosion. Designed with a semi-cylindrical profile, they offer easy installation over straight or curved tube surfaces. These shields play a vital role in increasing service life, reducing tube maintenance, and ensuring the efficient operation of thermal systems across power generation, chemical processing, and petrochemical industries. 1Cr25Ni20Si2 U Type Inner Half Round Tube Shield The 1Cr25Ni20Si2 U Type Inner Half Round Tube Shield is fabricated from a high-temperature resistant chromium-nickel-silicon alloy steel. This grade offers excellent resistance to oxidation, sulfur corrosion, and thermal fatigue, even under prolonged exposure to temperatures above 1000°C. The inner U-type configuration is specifically designed to shield the internal curvature of U-bend tubes, a zone vulnerable to accelerated wear caused by flue gas turbulence, slag impact, and thermal cycling. • Inner U Type Half Round Tube Shield – Designed to cover the inside arc of U-bend tubes, offering protection from erosion, scale formation, and heat stress. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of 1Cr25Ni20Si2 U Type Inner Half Round Tube Shields, providing high-performance protective solutions for extreme temperature and chemically aggressive environments. Chemical Composition of 1Cr25Ni20Si2 – High Temperature Alloy Steel • Carbon (C): ≤ 0.20% • Manganese (Mn): ≤ 1.50% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): 1.80 – 2.50% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Applications: Suited for high-temperature environments with oxidizing, sulfurizing, or carburizing gases. Especially effective in boiler, furnace, and WHRB systems operating under cyclic thermal conditions. Uses • Installed on the inner arc of U-bend tubes in power plant boilers and superheaters exposed to slag and thermal stress • Protects curved tube bends in WHRBs, HRSGs, and reformers subjected to flue gas erosion and oxidation • Applied in heat exchangers and reactors operating in high-temperature and chemically active atmospheres • Used in furnace coils, metallurgical plants, and incinerators for protection from sulfur-laden and high-heat gas streams • Suitable for curved tube coils in petrochemical and process industries where scaling and corrosion are common Features • Excellent oxidation resistance – Performs effectively at continuous service temperatures up to 1100°C • Superior inner arc protection – Covers high-wear zones exposed to heat, slag, and turbulent gas flow • Enhanced thermal fatigue resistance – Designed for use in cyclic heating environments without distortion • Corrosion resistance – Withstands acid gases and sulfur-rich flue gases common in industrial combustion systems • Precision fitment – Fabricated to match specific tube sizes and bend radii for optimal protection and stability • Easy installation – Can be fixed using clamping, tack welding, or banding methods depending on system design Applications • power generation – Shields inner U-bend tubes in superheaters and reheaters from high-temperature erosion • waste heat recovery – Used in WHRBs and HRSGs to protect internal arcs against scaling and oxidation • petrochemical processing – Protects U-bend tubes in reformers and exchangers exposed to acidic gas streams • chemical industry – Ensures long-lasting performance in reactors and thermal processing equipment • metallurgical and furnace systems – Applied where high heat and slag exposure are routine Conclusion The 1Cr25Ni20Si2 U Type Inner Half Round Tube Shield by Ladhani Metal Corporation – manufacturer, supplier, and exporter – provides high-strength, heat-resistant shielding for the internal arcs of U-bend tubes operating in severe industrial environments. Its resistance to oxidation, corrosion, and thermal fatigue makes it a dependable solution for extending equipment life and performance under extreme conditions. For custom sizes, technical support, or pricing inquiries, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are engineered to protect heat exchanger, boiler, and superheater tubes from erosion, thermal scaling, and high-temperature corrosion. These shields are widely used in power plants, petrochemical systems, and high-temperature industrial equipment where tubes are exposed to direct flame, turbulent gas flow, and particulate matter. Their half-round shape ensures easy installation over curved or straight tube surfaces, providing an effective layer of protection without the need for equipment disassembly. SS 310S U Type Inner Half Round Tube Shield The SS 310S U Type Inner Half Round Tube Shield is made from stainless steel grade 310S, a low-carbon variant of SS 310. It offers excellent resistance to oxidation and high-temperature corrosion while providing improved weldability and reduced risk of sensitization during thermal cycling. This inner U-type shield is specifically designed to cover the inside arc of U-bend tubes, an area commonly affected by accelerated wear due to turbulence, heat concentration, and gas flow deflection. • Inner U Type Half Round Tube Shield – Designed to protect the inner curvature of U-bend tubes from erosion, slag buildup, and oxidation caused by high-velocity gas flow and thermal cycling. Ladhani Metal Corporation is a recognized manufacturer, supplier, and exporter of SS 310S U Type Inner Half Round Tube Shields, providing tailored solutions for heat-exposed systems in demanding industrial environments. Chemical Composition of SS 310S – Low Carbon Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.50% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Applications: Best suited for oxidizing and high-temperature environments where welded structures are used and resistance to thermal fatigue is critical. Uses • Inner arc shielding for U-bend tubes in high-temperature boilers and superheaters • Installed in the return bends of HRSGs and waste heat recovery boilers (WHRBs) • Used in curved sections of heat exchangers exposed to combustion gases and fluctuating heat • Protects tube bends in petrochemical reactors, reformers, and process furnaces • Ideal for inner arc protection in high-temperature flue gas zones and incinerator coils Features • Excellent high-temperature oxidation resistance – Effective performance in environments up to 1050°C • Low carbon content – Reduces risk of intergranular corrosion after welding or extended service • Focused protection – Shields the inner bend surface most prone to gas turbulence and scaling • Accurate fitment – Custom-fabricated to match specific tube sizes and radii for optimal coverage • Fast installation – Can be securely mounted using stainless steel clamps, bands, or welds • Reliable performance – Enhances the lifespan of U-bend tubes and minimizes maintenance in heat-affected areas Applications • power plants – Used on U-bend inner surfaces in superheaters and reheaters to resist scale and corrosion • petrochemical industry – Shields inside tube arcs in reformers and exchangers exposed to hot process gases • waste heat systems – Protects internal tube bends in WHRBs and HRSGs from slag and thermal fatigue • chemical plants – Provides corrosion protection for return bends in reactors and condensers • high-temperature industrial units – Installed in curved tube coils subjected to flame exposure and oxidizing gases Conclusion The SS 310S U Type Inner Half Round Tube Shield by Ladhani Metal Corporation – manufacturer, supplier, and exporter – is a dependable, high-temperature protective solution for shielding the inner arc of U-bend tubes. With its excellent oxidation resistance, low carbon content, and suitability for welded environments, this shield is ideal for critical systems operating under thermal stress and corrosive gas flow. For technical consultation, custom fabrication, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are engineered protective components designed to safeguard heat exchanger, boiler, and superheater tubes from erosion, scaling, thermal stress, and corrosion. These shields are commonly applied in power generation, petrochemical, and high-temperature industrial systems where tube surfaces are subjected to flue gas turbulence, slag buildup, and elevated temperatures. Their half-round configuration ensures secure installation and reliable performance over curved or straight tube sections, extending equipment life and reducing maintenance costs. SS 304L U Type Inner Half Round Tube Shield The SS 304L U Type Inner Half Round Tube Shield is manufactured from stainless steel grade 304L, a low-carbon version of SS 304. It offers improved weldability and resistance to intergranular corrosion without sacrificing strength or oxidation resistance. The inner U-type design is specifically tailored to protect the inner arc of U-bend tubes, an area frequently exposed to turbulent flow, localized scaling, and corrosive gases that accelerate material degradation. • Inner U Type Half Round Tube Shield – Covers the inner curvature of U-bend tubes, shielding against erosion, scaling, and corrosion caused by turbulent gas flow and heat concentration. Ladhani Metal Corporation is a well-known manufacturer, supplier, and exporter of SS 304L U Type Inner Half Round Tube Shields, offering high-quality and custom-built protection for thermal and chemical process applications. Chemical Composition of SS 304L – Low Carbon Austenitic Stainless Steel • Carbon (C): ≤ 0.035% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 13.0% • Iron (Fe): Balance Applications: Best suited for environments requiring corrosion resistance and thermal stability, especially where welding is involved or where intergranular corrosion must be minimized. Uses • Inner bend protection in superheaters, reheaters, and economizer tubes exposed to flue gas turbulence • Installed in the return bends of waste heat recovery boilers (WHRBs) and HRSGs • Applied in curved tube sections of steam reformers and heat exchangers handling moderately corrosive gases • Used in condensers and evaporators in power and process plants • Ideal for environments where welded tube components are at risk of intergranular corrosion Features • Superior corrosion resistance – Excellent protection against oxidation and scaling in high-temperature service • Low carbon content – Reduces carbide precipitation during welding, minimizing risk of corrosion at weld zones • Inner arc shielding – Specifically designed to protect the internal arc of U-bends from erosion and thermal fatigue • Precision fabrication – Manufactured to fit the exact radius and diameter of the tube bend • Quick and easy installation – Mountable using clamps, stainless steel bands, or tack welding • Enhanced durability – Extends the life of tubes in cyclic and corrosive operating environments Applications • power plants – Protects inner U-bend surfaces in superheaters and heat recovery sections from slag and heat exposure • petrochemical industries – Shields internal arcs in process heaters and reactors operating with acidic gases • waste heat recovery – Prevents inner arc degradation in WHRBs and HRSGs under variable temperature loads • chemical plants – Installed in corrosive media systems where steam and acidic vapors cause wear • industrial heaters – Used in return bends subjected to thermal cycling and corrosive combustion products Conclusion The SS 304L U Type Inner Half Round Tube Shield by Ladhani Metal Corporation – manufacturer, supplier, and exporter – is a reliable and corrosion-resistant solution for protecting the inner curvature of U-bend tubes in moderate to high-temperature environments. With its low-carbon composition and excellent thermal performance, it is ideal for systems requiring welded components and long-term durability in corrosive service conditions. For technical consultation, custom sizes, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are engineered to provide robust protection for boiler, superheater, and heat exchanger tubes against high-temperature erosion, slag deposition, scaling, and corrosive gas exposure. These shields are essential in power plants, petrochemical systems, and high-heat industrial environments where tubes are vulnerable to rapid degradation due to thermal cycling and particulate flow. The half-round design ensures quick installation over curved or straight tube sections without system disassembly. U Type Inner Half Round Tube Shield The U Type Inner Half Round Tube Shield is specially designed to protect the inner curvature of U-bend tubes, which often experiences high levels of turbulence, localized corrosion, and scaling due to gas redirection and mechanical stress. Inner shields are commonly paired with outer shields for full bend protection and are manufactured in a wide range of stainless steel and high-temperature alloy grades, customized to specific environmental and system requirements. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of U Type Inner Half Round Tube Shields in various material grades, offering tailored protection solutions for high-temperature and corrosive conditions across multiple industries. Available Grades • SS 304 – General-use stainless steel with good corrosion and heat resistance • SS 304L – Low-carbon version for improved weldability and reduced carbide precipitation • SS 316 – Molybdenum-added alloy with excellent resistance to pitting and chlorides • SS 316L – Low-carbon alternative for superior corrosion resistance in welded environments • SS 310 – Austenitic high-temperature steel with excellent oxidation resistance • SS 310S – Low-carbon SS 310 for better thermal fatigue performance • SS 410 – Martensitic stainless steel with good strength and abrasion resistance • SS 420 – High-hardness martensitic grade ideal for erosion-prone zones • SS 430 – Ferritic grade for moderate corrosion and oxidation resistance • 1Cr13 – Martensitic stainless steel offering mechanical protection and heat resistance • 1Cr18Ni9Ti – Titanium-stabilized grade offering resistance to intergranular corrosion • Cr23Ni13 – High-temperature alloy with excellent oxidation and scaling resistance • Cr25Ni20 – High-performance grade for extreme thermal and oxidizing conditions • 1Cr25Ni20Si2 – Heat-resistant alloy with silicon for improved scale resistance • 1Cr20Ni14Si2 – Alloy for thermal fatigue protection and oxidizing environments Applications • Inner arc protection in U-bend tubes of boilers, superheaters, and reheaters • Shielding internal curves of tubes in waste heat recovery boilers (WHRBs) and HRSGs • Corrosion and scale defense for inner tube arcs in petrochemical and steam reforming units • Inner surface protection in furnace coils, reformers, and incinerators • Installed in chemical plants and thermal systems prone to turbulent flue gas exposure Features • Focused inner arc protection – Guards the most corrosion- and scale-prone surface of U-bend tubes • Material flexibility – Available in multiple grades for varied thermal, mechanical, and chemical requirements • Excellent thermal resistance – Withstands extreme temperatures depending on material (up to 1150°C+) • Precise fit – Custom-fabricated to match exact tube dimensions and bend radii • Simple installation – Mounted using clamps, stainless bands, or welding techniques • Dual-shield pairing – Can be combined with outer shields for complete U-bend coverage • Long-lasting performance – Enhances tube reliability and reduces maintenance in high-wear zones Applications • power generation – Protects U-bend inner surfaces in superheaters and economizers from flue gas turbulence • petrochemical plants – Shields inside arcs in reformers and heaters exposed to chlorides and acidic gases • waste heat systems – Installed in HRSGs and WHRBs to prevent slag and oxidation on internal bends • chemical industries – Suitable for reactors and high-temperature exchangers handling corrosive media • cement and metallurgy – Used in systems exposed to flame, dust, and oxidizing atmospheres Conclusion The U Type Inner Half Round Tube Shield by Ladhani Metal Corporation – manufacturer, supplier, and exporter – is a precision-engineered solution for protecting the inner arc of U-bend tubes against corrosion, scale formation, and thermal damage. Available in a wide range of stainless steels and high-temperature alloys, these shields provide durable, customizable, and easy-to-install protection for critical components in power, chemical, and thermal processing systems. For custom sizes, technical assistance, or quotations, please contact Ladhani Metal Corporation.