DIN 2543 Inconel Flanges are flanges made from Inconel, a group of nickel-chromium superalloys known for their excellent corrosion resistance, high strength, and ability to withstand high temperatures. These flanges are often used in extreme environments where both heat resistance and corrosion resistance are required, such as in aerospace, chemical processing, and power generation industries. Material: Typically made from Inconel alloys, most commonly Inconel 600, Inconel 625, and Inconel 718. Pressure Rating (PN16): Rated for 16 bar (approx. 232 psi) at 20°C (68°F), making them suitable for medium-pressure applications. Key Features of DIN 2543 Inconel Flanges: Corrosion Resistance: Inconel alloys offer excellent resistance to corrosion, particularly in high-temperature environments. High-Temperature Strength: Inconel flanges maintain their strength even at high temperatures (up to around 1000°C/1832°F), which makes them well-suited for use in gas turbines, furnaces, and heat exchangers. Durability: Inconel materials are designed to provide long-lasting durability under high-stress and high-temperature conditions, even in aggressive corrosive environments. Weldability: Inconel alloys are generally weldable, though careful attention must be given to the welding process to avoid any cracking or other issues associated with high-temperature alloys. Types of Inconel Flanges (DIN 2543): Weld Neck Flanges (WN): These flanges have a long neck that provides additional strength by allowing for a strong weld between the flange and the pipe. Ideal for high-pressure and high-temperature systems. Slip-On Flanges (SO): These flanges slide over the pipe and are welded inside and outside. They are easy to install and are commonly used in medium-pressure applications. Blind Flanges (BL): Used to seal the end of a piping system, preventing the flow of fluids. These flanges do not have a hole in the center. Socket Weld Flanges (SW): These flanges have a socket for the pipe to fit into, which is then welded. They are used in small-bore systems where high-pressure conditions are present. Lap Joint Flanges (LJ): These flanges are paired with a lap joint stub end. They allow easy alignment and disassembly, making them ideal for systems that require frequent maintenance. Common Inconel Grades for DIN 2543 Flanges: Inconel 600: Composition: Approximately 72% nickel, 14-17% chromium, and 6-10% iron. Properties: Excellent resistance to oxidation and corrosion at high temperatures, especially in sulfuric acid and chloride environments. Inconel 625: Composition: Approximately 58% nickel, 22% chromium, and 9% molybdenum. Properties: Outstanding resistance to both high temperatures and a wide range of corrosive environments, including seawater, acids, and oxidizing environments. Inconel 718: Composition: Approximately 50-55% nickel, 17-21% chromium, and 4-5% molybdenum. Properties: Known for its high strength and resistance to heat, oxidation, and corrosion, especially in high-temperature environments. Pressure Rating (PN16): PN16 refers to the pressure rating of 16 bar (approx. 232 psi) at 20°C (68°F). #flanges #din2543 #din2543inconelflanges #inconelflanges

DIN 2543 refers to a standard for titanium flanges under the German DIN (Deutsches Institut für Normung) system. Titanium flanges are designed for use in piping systems, connecting pipes, valves, pumps, and other equipment. They provide a secure method of joining pipes while allowing for easy disassembly when needed. These flanges are made from titanium or titanium alloys, which are known for their strength, corrosion resistance, and lightweight properties. Titanium is particularly advantageous in harsh environments such as marine, chemical processing, and high-temperature systems due to its resistance to oxidation and corrosion. Key Features: Material: Titanium or titanium alloys Corrosion Resistance: Excellent resistance to corrosion in various environments, particularly in acidic or saline conditions. Strength-to-weight ratio: Higher strength-to-weight ratio than steel. Temperature Tolerance: Titanium flanges can handle high temperatures and extreme conditions. Lightweight: Titanium is significantly lighter than steel, making transportation and handling easier. Pressure Rating (PN16):The "PN" (Pressure Nominal) value indicates the maximum pressure the flange can withstand at a specific temperature (typically 20°C).PN16 means the flange is rated for a maximum pressure of 16 bar (or 232 psi). Standard Flange Design: DIN 2543 titanium flanges follow a standardized design which includes: Type: Usually weld neck, slip-on, blind, or socket weld. Size: Flanges come in various sizes with different pressure ratings. Bolt Holes: They have drilled holes for bolts to connect to the mating flange. Face Type: Can be raised face, flat face, or RTJ (Ring Type Joint) depending on the application. Types of Titanium Flanges (According to DIN 2543): Weld Neck Flanges (WN): Ideal for high-pressure systems. Slip-on Flanges (SO): Easy to install, used for general applications. Blind Flanges (BL): Used to seal the end of a pipeline. Socket Weld Flanges (SW): Used for small bore applications. Lap Joint Flanges (LJ): Used with a stub end, providing easier alignment and disassembly Grades of Titanium Used for Flanges: Grade 2 (CP-Titanium - Commercially Pure Titanium): Composition: 99.2% pure titanium. Properties: Excellent corrosion resistance, moderate strength, highly ductile, good weldability. Grade 5 (Ti-6Al-4V - Titanium Alloy): Composition: 90% Titanium, 6% Aluminum, 4% Vanadium. Properties: High strength, excellent corrosion resistance, good fatigue strength, and slightly more difficult to weld. Conclusion: Grade 2 is ideal for applications requiring excellent corrosion resistance and ease of fabrication, while Grade 5 provides superior strength and is used in demanding applications like aerospace and high-performance industrial systems. Both grades offer excellent properties for titanium flanges used in a wide variety of industries. we also deal in various material in DIN2543 such at Stainless steel, duplex, super duplex, Inconel, Monel and carbon steel

DIN 2527 Monel Blind Flanges are critical components used in piping systems to seal the open ends of pipes, vessels, or equipment when no further connection is needed. These blind flanges are made from Monel alloys, a group of nickel-copper-based alloys known for their exceptional corrosion resistance, especially in harsh marine and chemical environments. Monel flanges, manufactured to the DIN 2527 standard, ensure superior strength and reliability in demanding applications, making them ideal for industries such as chemical processing, marine, and power generation. Material Composition of Monel Alloys: Monel alloys are primarily composed of Nickel (Ni) and Copper (Cu), along with small amounts of other elements such as iron, manganese, and silicon. Two of the most commonly used Monel alloys in blind flange production are: Monel 400: Nickel (Ni): 63% Copper (Cu): 28-34% Iron (Fe): 2.5% max Manganese (Mn): 2.0% max Silicon (Si): 0.5% max Carbon (C): ≤ 0.30% Sulfur (S): ≤ 0.024% Monel K-500: Nickel (Ni): 63% Copper (Cu): 28% Aluminum (Al): 2.3-3.1% Titanium (Ti): 0.35-0.85% Iron (Fe): 2.5% max Manganese (Mn): 1.0% max Silicon (Si): 0.5% max Carbon (C): ≤ 0.30% Sulfur (S): ≤ 0.015% Key Features of DIN 2527 Monel Blind Flanges: Corrosion Resistance: Monel alloys are highly resistant to a wide variety of corrosive agents, including seawater, sulfuric acid, hydrochloric acid, and alkaline environments. Monel 400, in particular, is known for its excellent resistance to chloride-induced stress corrosion cracking, making it ideal for marine applications. Monel K-500 offers enhanced strength and resistance to corrosion fatigue, commonly used in more challenging environments. Temperature Resistance: Monel 400 can withstand temperatures up to 1000°F (538°C) continuously and up to 1200°F (649°C) intermittently. Monel K-500 offers high strength and resistance to oxidation and scaling in environments up to 1000°F (538°C). Mechanical Strength: Monel 400 is known for its strength and durability, especially in environments that require resistance to both high pressure and corrosion. Monel K-500 exhibits additional strength due to the presence of aluminum and titanium, making it suitable for applications under higher stresses. Dimensional Accuracy and Pressure Class: DIN 2527 Monel Blind Flanges are manufactured to precise dimensions, ensuring a secure seal in the piping system. These flanges are available in various pressure classes, such as PN6, PN10, PN16, and others, providing flexibility for different pressure ratings. Design Options: Standard Blind Flange (Type A): A solid, flat disc used to seal the end of a pipe or vessel. Flat-Faced Blind Flange: Designed with a flat sealing surface, ideal for low-pressure systems. Raised Face Blind Flange: Features a raised surface around the center to improve sealing in high-pressure systems. Ring-Type Joint (RTJ) Blind Flange: Includes a groove for an RTJ gasket, used for high-pressure applications, often in the oil and gas industry. Long Weld Neck Blind Flange: Features an extended neck for welding, offering additional strength and used in high-pressure or stressed systems. Nominal Diameter: DIN 2527 Monel Blind Flanges are available in a wide range of sizes, typically from DN10 (1/2 inch) up to DN600 (24 inches) or more, depending on system requirements.

DIN 2527 SS 321 Blind Flanges are specialized components used in industrial piping systems to close off the ends of pipes or equipment where no further connection is necessary. A blind flange is a solid, flat disc without a central bore, specifically designed to seal the open end of a pipe or a vessel. The DIN 2527 standard, developed by the German Institute for Standardization, defines the specifications for these flanges, ensuring that they meet high standards for dimensional accuracy, pressure tolerance, and mechanical strength. The SS 321 material, used for the production of these blind flanges, is an austenitic stainless steel known for its excellent resistance to high-temperature oxidation, corrosion, and scaling. The addition of titanium to this steel stabilizes its structure, making it suitable for environments where temperatures fluctuate or are consistently high. As a result, SS 321 blind flanges are frequently used in industries where both strength and resistance to harsh environmental conditions are paramount, including the chemical, petrochemical, aerospace, and power generation industries. By utilizing DIN 2527 SS 321 Blind Flanges, companies can ensure secure, long-lasting, and efficient closures for piping systems under challenging operational conditions. These flanges are essential in maintaining the integrity of systems exposed to elevated pressures and corrosive substances, ensuring the safe containment of fluids and gases. key Features of DIN 2527 SS 321 Blind Flanges: Material Composition of SS 321: Carbon (C): ≤ 0.08% Chromium (Cr): 17.0 - 19.0% Nickel (Ni): 9.0 - 12.0% Titanium (Ti): 5 times the carbon content, generally around 0.60% minimum, to prevent carbide precipitation. Manganese (Mn): 2.00% max Silicon (Si): 1.00% max Phosphorus (P): 0.045% max Sulfur (S): 0.030% max Pressure and Temperature Resistance: Operating Temperature: SS 321 can perform well in high-temperature environments, up to 900°C (1650°F) intermittently and up to around 700°C (1292°F) for continuous service. Design and Dimensions of DIN 2527 Blind Flanges: Pressure Ratings: The design of a DIN 2527 blind flange is primarily based on pressure class ratings (such as PN6, PN10, PN16, etc.), which denote the maximum pressure the flange can safely withstand. Bolt Holes: The number and size of bolt holes for DIN 2527 blind flanges are specified according to the flange's pressure class and size. The bolt pattern is designed to ensure a tight seal and accommodate appropriate bolt sizes for a given pressure class. Thickness: The thickness of a blind flange can vary depending on the pressure rating and size, with thicker flanges being required for higher pressure applications. Nominal Diameter: Blind flanges are available in various nominal pipe diameters (DN) ranging from DN10 (1/2 inch) up to DN600 (24 inches) or more. Types of DIN 2527 SS 321 Blind Flanges: Standard Blind Flange (Type A): A solid, circular flange used to seal the end of a pipe or vessel. Common for general applications. Flat-Faced Blind Flange: Has a flat sealing surface, ideal for low-pressure systems and tight sealing. Raised Face Blind Flange: Features a raised surface around the center for better sealing in higher pressure systems. Ring-Type Joint (RTJ) Blind Flange: Has a groove for an RTJ gasket, designed for high-pressure applications, often used in the oil and gas industry. Long Weld Neck Blind Flange: Has an extended neck for welding, providing additional strength and used in high-pressure or stressed systems.

A DIN 2527 AISI 4140 blind flange is a specialized type of blind flange made from AISI 4140 alloy steel, adhering to the DIN 2527 German standard. Blind flanges are crucial components in piping systems, used to seal the end of a pipe, vessel, or valve to isolate it or stop the flow of fluids. The AISI 4140 material used for this specific flange is a high-strength alloy steel known for its robustness and excellent mechanical properties, making it ideal for high-stress applications. AISI 4140, a chromium-molybdenum alloy steel, is renowned for its excellent mechanical properties, including high tensile strength, hardness, and resistance to wear. It is often used in heavy-duty applications such as in the automotive, aerospace, and oil & gas industries, where the need for robust materials is crucial. The use of AISI 4140 steel in a DIN 2527 blind flange ensures that the flange can handle high pressures, temperatures, and mechanical stresses without compromising on performance or safety. Material: AISI 4140 Alloy Steel Composition: AISI 4140 is a medium-carbon steel alloy that contains chromium (Cr) and molybdenum (Mo) as its primary alloying elements. These elements improve the steel's hardness, strength, and wear resistance. Key Properties: Strength: High tensile strength and yield strength, making it capable of withstanding high loads and stress in high-pressure applications. Toughness: Offers excellent toughness and impact resistance, making it suitable for challenging environments where forces are dynamic. Hardness: Can be heat-treated to achieve high hardness levels, providing resistance to wear and abrasion. Corrosion Resistance: While AISI 4140 is not as corrosion-resistant as stainless steel, it can still perform well in less corrosive environments with proper surface treatment (e.g., coatings or galvanizing). Design and Dimensions (DIN 2527) Shape: The blind flange is a flat, circular plate with no central hole. Its purpose is to seal the end of a pipe or vessel, effectively "closing" the pipeline or system. Bolt Holes: The flange has evenly spaced bolt holes around the perimeter, allowing it to be bolted securely to the corresponding flange or fitting in the system. These holes align with the bolt pattern of other components. Thickness: The flange thickness varies depending on the size, pressure class, and specific application requirements. It is designed to withstand internal pressure while providing a reliable seal. Pressure Rating: Flanges are typically rated according to pressure classes such as PN 6, PN 10, PN 16, PN 25, etc., indicating the maximum pressure the flange can safely handle without failure. Applications Pipeline Sealing: The primary function of a blind flange is to seal the open end of a pipeline, preventing the passage of fluids, gases, or other materials through the system. System Isolation: Blind flanges are used to isolate a section of the system for maintenance or repairs, allowing for safe disconnection of parts while maintaining system integrity. Pressure Containment: AISI 4140 blind flanges are also used in applications where maintaining pressure within a system is critical. The high strength and durability of AISI 4140 make it suitable for use in high-pressure environments. Types of Blind Flanges in DIN 2527 Raised Face (RF): The flange surface has a small raised area around the bolt circle to improve sealing when mated with a gasket. Flat Face (FF): The flange surface is level with the flange body, typically used with softer gaskets to create a seal. Ring Type Joint (RTJ): The flange may feature a groove to accommodate a metal ring gasket for high-pressure applications, providing a secure, reliable seal.

A DIN 2527 AISI 8630 blind flange is a specialized type of blind flange made from AISI 8630 alloy steel, designed according to the DIN 2527 German standard. Blind flanges are essential components in industrial piping systems, used to seal the end of a pipe, vessel, or valve to isolate it or prevent the flow of fluids. The AISI 8630 material used for this specific flange provides excellent strength, toughness, and wear resistance, making it ideal for applications in high-stress environments. Material: AISI 8630 Alloy Steel AISI 8630 is a low-alloy steel, enriched with nickel, chromium, and molybdenum for enhanced mechanical properties. It is known for its strength, toughness, and resistance to wear, making it suitable for heavy-duty applications, particularly in industries where components are subjected to high stress and pressure. Composition of AISI 8630: Carbon (C): 0.30% – 0.35% Provides strength and hardness. Chromium (Cr): 0.80% – 1.10% Improves hardness, wear resistance, and high-temperature strength. Molybdenum (Mo): 0.15% – 0.25% Enhances hardenability and resistance to wear. Nickel (Ni): 0.80% – 1.20% Adds toughness, especially at lower temperatures. Other elements: Small amounts of manganese (Mn), silicon (Si), and phosphorus (P), which improve the overall material quality and processing properties. Design and Dimensions (DIN 2527) Shape: The blind flange is a flat, circular plate with no central hole, designed to seal the open end of a pipe, valve, or vessel. Bolt Holes: The flange features evenly spaced bolt holes around the perimeter, which allow it to be securely attached to a matching flange or component. These holes align with the bolt pattern of the corresponding system components. Thickness: The thickness of the flange varies depending on the size and pressure rating, ensuring it can withstand internal pressure and provide a reliable seal. Pressure Rating: Pressure ratings are typically defined using classes such as PN 6, PN 10, PN 16, PN 25, etc., which represent the maximum pressure the flange can safely withstand without failure. Applications of DIN 2527 AISI 8630 Blind Flange Pipeline Sealing: The primary function of the blind flange is to seal the end of a pipeline, effectively preventing the passage of fluids, gases, or other materials. System Isolation: It is used to isolate sections of the pipeline for maintenance or repairs, allowing safe disconnection without compromising the integrity of the system. Pressure Containment: The high strength and durability of AISI 8630 make it suitable for applications where maintaining pressure within the system is critical, ensuring the flange can handle high-pressure environments. Types of Blind Flanges in DIN 2527 Blind flanges conforming to DIN 2527 can be found in different face types and sealing methods, including: Raised Face (RF): The flange surface has a slight raised area around the bolt circle, improving the seal when mated with a gasket. Flat Face (FF): The surface is level with the flange body and typically used with softer gaskets to create a seal. Ring Type Joint (RTJ): This type has a groove to accommodate a metal ring gasket, providing a secure seal in high-pressure applications. Conclusion A DIN 2527 AISI 8630 blind flange is a high-strength, durable sealing component designed for high-pressure and high-stress environments. Made from AISI 8630 alloy steel, it offers excellent mechanical properties such as strength, toughness, and wear resistance, making it ideal for use in industrial systems that require reliable seals under heavy loads and elevated temperatures.

Super Duplex Stainless Steel (SDSS) is an advanced type of Duplex Stainless Steel that combines the benefits of both austenitic and ferritic structures but with higher levels of chromium, nickel, and molybdenum, along with additional nitrogen content. This makes Super Duplex Stainless Steel (such as Super Duplex 2507) an ideal material for extremely demanding environments, particularly those exposed to harsh corrosive conditions. Material: Super Duplex Stainless Steel Superior Corrosion Resistance: Super Duplex stainless steels (e.g., 2507) offer exceptional resistance to pitting, crevice corrosion, and stress corrosion cracking (SCC), especially in environments with high chloride exposure. This makes them perfect for use in seawater, chemical processing, and offshore oil and gas applications. Strength: Super Duplex steels provide significantly higher tensile strength than standard Duplex and austenitic grades (such as 304 and 316), making them ideal for high-pressure and heavy-duty applications. Super Duplex steel has roughly twice the strength of 304 or 316 stainless steels. Temperature Resistance: Super Duplex stainless steels maintain good performance at moderate to high temperatures, typically performing well up to around 300°C (572°F). They can endure high-temperature environments but are not suitable for extreme high-temperature applications (e.g., above 400°C). Resistance to Chloride Stress Corrosion Cracking (SCC): Super Duplex stainless steels are particularly resistant to chloride-induced stress corrosion cracking, which is a significant advantage in industries that face exposure to seawater, brine, or other chloride-rich environments. Common Types of DIN 2527 Super Duplex Stainless Steel Blind Flanges: 1.4410 (F53): Offers excellent resistance to corrosion, high strength, and toughness, widely used in oil & gas, marine, and chemical industries. 1.4501 (F55): Higher alloy content, offering superior resistance to pitting and stress corrosion cracking, often used in subsea and offshore applications. 1.4412 (F60): Known for resistance to extreme environments like offshore and petrochemical industries. Design and Dimensions Shape: DIN 2527 blind flanges made from Super Duplex Stainless Steel follow the same general design as other flanges: flat, round plates with no central hole, used to seal the ends of pipes or pressure vessels. Bolt Holes: These flanges are equipped with bolt holes for bolting to other flanged components, ensuring a secure connection. The number and size of the bolt holes are determined by the flange's diameter and the pressure class. Thickness: The flange thickness varies depending on the pressure rating (e.g., PN 6, PN 10, PN 16, PN 25). Thicker flanges are designed to handle higher pressures, ensuring a secure seal and reliable performance. Pressure Rating: Super Duplex stainless steel blind flanges are designed for high-pressure environments. Due to their strength and resistance to corrosion, they are typically used in PN 10, PN 16, and PN 25 pressure ratings, although they can be designed for even higher pressure ratings depending on the application. Types of Blind Flanges in DIN 2527 (Super Duplex) Raised Face (RF): The raised face provides a contact area for a gasket, enhancing the sealing performance. This type of flange is commonly used with a gasket to improve sealing, particularly in systems that operate under high pressure. Flat Face (FF): The face of the flange is level with the surface and is often paired with a soft gasket to provide a tight seal. This design is typically used for low-pressure applications where sealing is not as critical. Ring Type Joint (RTJ): This type of flange features a groove for a metallic gasket, providing a secure seal under high pressure and harsh conditions. RTJ flanges are typically used in offshore oil and gas or chemical plants, where extreme conditions require highly durable sealing methods.

Product Name: Anodic titanium racks Material: Gr1, Gr2 Size: Customized Surface: Polished Anodic titanium racks Commercial pure titanium racks are made of hot rolled sheet containing 98.6 to 99.5% titanium, small amounts of iron, and clearance elements such as oxygen, nitrogen, carbon, and hydrogen. High clearance content increases strength and reduces electrical conductivity. High oxygen will produce a hard and brittle surface layer, high hydrogen will lead to embrittlement or failure in use. ASTM class 3 annealed titanium has tensile strength of 65 ksi, yield strength of 55 ksi and strength up to 400F. Elastic modulus is 16 x 106 psi. Pure titanium can bend 125 degrees around the diameter of normal thickness without cracking. 1. Titanium is a precious metal with an electrode potential of 0 to 0.5 V (reference standard electrode). It is resistant to sulfuric acid baths and was chosen as a shelf material for its good corrosion resistance and strength. Because aluminum is an active metal, the contact area between the titanium scaffold and aluminum may lead to galvanic corrosion and local defects during anodic oxidation. Titanium frames are best used for anodizing tubular products or products with holes. Material:pure titanium gr1,gr2 Dimension and type: as customized Shape:rectangular,round,square LADHANI METAL CORPORATION, MUMBAI, INDIA Company Information Ladhani Metal Corporation. We are committed to integrate engineering steel resources in India and serve the global engineering steel market. Our company has more than 32 years of experience in steel researching, production, managing and sales. In the aspect of resources and information, we have established cooperative and stronger relationship with nearly hundred enterprises, either state-owned or private owned in India. What’s more, we have built long, deep and close business relationship with dozens of steel company, Sharing and holding equities with several steel enterprises. Because of the close cooperation with steel companies and our pioneering spirit, which can ensure us stay at the top competition, and ensure our customers get what they really want! FOR MORE DETAIL CONTACT US AT :- ladhanimetal@gmail.com ladhanimetals@gmail.com www.ladhanimetal.in www.ladhanimetal.com LADHANI METAL CORPORATION, MUMABAI, INDIA, AVAILABLE AT FOLLOWING LOCATION:- Adilabad, Agartala, Agra, Ahmedabad, Ahmednagar, Ajmer, Akola , Aligarh , Alipore , Allahabad , Alleppey , Almora , Alwar , Alwaye , Amalapuram , Amaravati , Ambala , Amreli , Amritsar , Anakapalle , Anand , Anantapur , Andhra Pradesh , Anna Road , Arakkonam , Arunachal Pradesh , Asansol , Aska , Assam , Aurangabad , Azamgarh , Bagalkot , Bahraich , Balaghat , Balangir , Balasore , Ballia , Banasanktha , Banda , Bangalore , Bankura , Barabanki , Barabazaar , Baramulla , Barasat , Bardoli , Bareilly , Barmer , Bastar , Basti , Beawar , Beed , Begusarai , Belgaum , Bellary , Berhampur , Bhadrak , Bhagalpur , Bharatpur , Bharuch , Bhatinda , Bhavnagar , Bhilwara , Bhimavaram , Bhiwani , Bhojpur , Bhopal , Bhubaneswar , Bhusaval , Bidar , Bihar , Bijapur , Bijnor , Bikaner , Bilaspur , Birbhum , Budaun , Bulandshahar , Buldana , Burdwan , Cachar , Calcutta , Calicut , Cannanore , Chamba , Chamoli , Chandigarh , Chandrapur , Changanacherry , Channapatna , Chattisgarh , Chengalpattu , Chennai , Chhatarpur , Chhindwara , Chikmagalur , Chikodi , Chitradurga , Chittoor , Chittorgarh , Churu , Coimbatore , Contai , Cooch Behar , Cuddalore , Cuddapah , Cuttack , Darbhanga , Darjeeling , Darrang , Dehra Gopipur , Dehradun , Delhi , Delhi , Deoria , Dhanbad , Dharamsala , Dharmanagar , Dharmapuri , Dharwad , Dhenkanal , Dholpur , Dhule , Dibrugarh , Dinajpur , Dindigul , divisionname , Dungarpur , Durg , Eluru , Ernakulam , Erode , Etah , Etawah , Faizabad , Faridabad , Faridkot , Fatehgarh , Fatehpur , Ferozpur , Gadag , Gandhinagar , Gaya , Ghaziabad , Ghazipur , Giridih , Goa , Goalpara , Gokak , Gonda , Gondal , Gorakhpur , Gudivada , Gudur , Gujarat , Gulbarga , Guna , Guntur , Gurdaspur , Gurgaon , Guwahati , Gwalior , Hamirpur , Hanamkonda , Hardoi , Haryana , Hassan , Haveri , Hazaribagh , Himachal Pradesh , Hindupur , Hissar , Hooghly , Hoshangabad , Hoshiarpur , Howrah , Hyderabad , Idukki , Indore , Irinjalakuda , Jabalpur , Jaipur , Jalandhar , Jalgaon , Jalpaiguri , Jammu , Jammu kashmir , Jamnagar , Jaunpur , Jhansi , Jharkhand , Jhunjhunu , Jodhpur , Junagadh , Kakinada , Kalahandi , Kanchipuram , Kanniyakumari , Kanpur , Kapurthala , Karaikudi , Karimnagar , Karnal , Karnataka , Karur , Karwar , Kasaragod , Keonjhar , Kerala , Khammam , Khandwa , Kheda , Kheri , Kodagu , Kolar , Kolhapur , Kolkata , Koraput , Kota , Kottayam , Kovilpatti , Krishnagiri , Kumbakonam , Kurnool , Kurukshetra , Kutch , Lakshadweep , Leh , Lucknow , Ludhiana , Machilipatnam , Madhubani , Madhya Pradesh , Madurai , Mahabubnagar , Maharashtra , Mahesana , Mainpuri , Malda , Malegaon , Mandi , Mandsaur , Mandya , Mangalore , Manipur , Manjeri , Mathura , Mavelikara , Mayiladuthurai , Mayurbhanj , Medak , Meerut , Meghalaya , Midnapore , Mirzapur , Mizoram , Monghyr , Moradabad , Morena , Mumbai , Murshidabad , Muzaffarnagar , Muzaffarpur , Mysore , Nadia , Nagaland , Nagaon , Nagapattinam , Nagaur , Nagpur , Nainital , Nalanda , Nalbari , Nalgonda , Namakkal , Nanded , Nandyal , Nanjangud , Narasaraopet , Nasik , Navsari , Nawadha , Nellore , New Delhi , New Mumbai , Nilgiris , Nizamabad , North Eastern , Odisha , Osmanabad , Ottapalam , Palamau , Palghat , Pali , Panchmahals , Pandharpur , Parvathipuram , Patan , Pathanamthitta , Patiala , Patna , Pattukottai , Pauri , Peddapalli , Pharbhani , Phulbani , Pithoragarh , Pollachi , Pondicherry , Porbandar , Prakasam , Pratapgarh , Proddatur , Pudukkottai , Pune , Punjab , Puri , Purnea , Purulia , Puttur , Quilon , Rae Bareilly , Raichur , Raigad , Raigarh , Raipur , Rajahmundry , Rajasthan , Rajkot , Rajouri , Ramanathapuram , Rampur Bushahr , Ranchi , Ratlam , Ratnagiri , Rewa , Rohtak , Rohtas , Sabarkantha , Sagar , Saharanpur , Saharsa , Salem , Samastipur , Sambalpur , Sangareddy , Sangli , Sangrur , Santhal Parganas , Saran , Satara , Sawaimadhopur , Secunderabad , Sehore , Shahdol , Shahjahanpur , Shimla , Shimoga , Shrirampur , Sibsagar , Sikar , Sikkim , Sindhudurg , Singhbhum , Sirohi , Sirsi , Sitamarhi , Sitapur , Sivaganga , Siwan , Solan , Solapur , Sonepat , Sriganganagar , Srikakulam , Srinagar , Srirangam , Sultanpur , Sundargarh , Surat , Surendranagar , Suryapet , Tadepalligudem , Tambaram , Tamilnadu , Tamluk , Tehri , Tenali , Thalassery , Thane , Thanjavur , Theni , Tinsukia , Tiruchirapalli , Tirunelveli , Tirupati , Tirupattur , Tirupur , Tirur , Tiruvalla , Tiruvannamalai , Tonk , Trichur , Trivandrum , Tumkur , Tuticorin , Udaipur , Udhampur , Udupi , Ujjain , Una , Uttar Pradesh , Uttarakhand , Vadakara , Vadodara , Vaishali , Valsad , Varanasi , Vellore , Vidisha , Vijayawada , Virudhunagar , Visakhapatnam , Vizianagaram , Vriddhachalam , Wanaparthy , Warangal , Wardha , West Bengal , Yeotmal , Bangalore , Hyderabad , Chennai , Kolkata , Jaipur , Indore , Thane , Pimpri-Chinchwad , Nashik , Kalyan-Dombivli , Vasai-Virar , Varanasi , Navi Mumbai , Hubli–Dharwad , Tiruchirappalli , Tiruppur , Salem , Mira-Bhayandar , Bhiwandi , Amravati , Noida , Jamshedpur , Bhilai , Cuttack , Firozabad , Kochi , Durgapur , Rourkela , Loni , Siliguri , Ulhasnagar , Sangli-Miraj & Kupwad , Ambattur , Thiruvananthapuram , Davanagere , Kozhikode , Maheshtala , Rajpur Sonarpur , Bokaro , South Dumdum , Gopalpur , Bhatpara , Panihati , Latur , Korba , Kollam , Avadi , Kadapa , Kamarhati , Rampur , Thrissur , Bardhaman , Kulti , Parbhani , Ozhukarai , Bihar Sharif , Panipat , Bally , Aizawl , Dewas , Ichalkaranji , Bathinda , Jalna , Kirari Suleman Nagar , Purnia , Satna , Mau , Sonipat , Farrukhabad , Imphal , Hapur , Arrah , Ambarnath , North Dumdum , New Delhi , Gandhidham , Baranagar , Tiruvottiyur , Thoothukudi , Ramagundam , Silchar , Haridwar , Vijayanagaram , Nagercoil , Sri Ganganagar , Karawal Nagar , Mango , Bulandshahr , Uluberia , Katni , Sambhal , Singrauli , Nadiad , Naihati , Yamunanagar , Bidhannagar , Pallavaram , Munger , Panchkula , Burhanpur , Raurkela Industrial Township , Kharagpur , Hospet , Nangloi Jat , Ongole , Deoghar , Chapra , Haldia , Amroha , Bhind , Bhalswa Jahangir Pur , Madhyamgram , Berhampore , Morbi , Raebareli , Khora, Ghaziabad , Bhusawal , Orai , Phusro , Mehsana , Raiganj , Sirsa , Danapur , Serampore , Sultan Pur Majra , Panvel , Shivpuri , Surendranagar Dudhrej , Unnao , Chinsurah , Alappuzha , Adoni , Katihar , Mahbubnagar , Jorhat , Sasaram , Hajipur , Bongaigaon , Dehri , Madanapalle , Bettiah , Ramgarh , Guntakal , Motihari , Dharmavaram , Medininagar , Phagwara , Hosur , Miryalaguda , Tadipatri , Kishanganj , Jamalpur , Kavali , Buxar , Tezpur , Jehanabad , Gangtok , Assam , Bihar , Chattisgarh , Delhi , Gujarat , Haryana , Himachal Pradesh , Jammu kashmir , Jharkhand , Karnataka , Kerala , Madhya Pradesh , Maharashtra , Odisha , Punjab , Rajasthan , Tamilnadu , Uttar Pradesh , Uttarakhand , west Bengal WE EXPORT TO FOLLOWING COUTRIES Switzerland , Afghanistan , Albania , Algeria , Angola , AntiguaandBarbuda , Argentina , Armenia , Aruba , Australia , Austria , Azerbaijan , Bahrain , Bangladesh , Barbados , Belarus , Belgium , Belize , Benin , Bhutan , Bolivia , BosniaandHerzegovina , Botswana , Brazil , Brunei , Bulgaria , BurkinaFaso , Burundi , CaboVerde , Cambodia , Cameroon , Canada , CentralAfricanRepublic , Chad , Chile , China , Colombia , Comoros , Congo , CostaRica , Côted'Ivoire , Croatia , Cyprus , CzechRepublic , Denmark , Djibouti , Dominica , DominicanRepublic , Ecuador , Egypt , ElSalvador , EquatorialGuinea , Eritrea , Eswatini , Ethiopia , Fiji , Finland , France , Gabon , Georgia , Germany , Ghana , Greece , Grenada , Guatemala , Guinea , Guinea-Bissau , Guyana , Haiti , Honduras , HongKong , Hungary , Iceland , Indonesia , Iran , Iraq , Ireland , Israel , Italy , Jamaica , Japan , Jordan , Kazakhstan , Kenya , Kiribati , Kosovo , Kuwait , Kyrgyzstan , Laos , Latvia , Lebanon , Lesotho , Liberia , Libya , Lithuania , Luxembourg , Macau , Madagascar , Malawi , Malaysia , Maldives , Mali , Malta , MarshallIslands , Mauritania , Mauritius , Mexico , Micronesia,FederatedStatesof , Moldova , Mongolia , Montenegro , Morocco , Mozambique , Myanmar , Namibia , Nauru , Netherlands , NewZealand , Nicaragua , Niger , Nigeria , NorthMacedonia , Norway , Oman , Palau , Panama , PapuaNewGuinea , Paraguay , Peru , Philippines , Poland , Portugal , PuertoRico , Qatar , Romania , Russia , Rwanda , SaintKittsandNevis , SaintLucia , SaintVincentandtheGrenadines , Samoa , SanMarino , SãoToméandPríncipe , SaudiArabia , Senegal , Serbia , Seychelles , SierraLeone , Singapore , Slovakia , Slovenia , SolomonIslands , SouthAfrica , SouthKorea , SouthSudan , Spain , SriLanka , Sudan , Suriname , Sweden , Taiwan , Tajikistan , Tanzania , Thailand , TheBahamas , TheGambia , Timor-Leste , Togo , Tonga , TrinidadandTobago , Tunisia , Turkey , Turkmenistan , Tuvalu , Uganda , Ukraine , UnitedArabEmirates , UnitedKingdom , UnitedStates , Uruguay , Uzbekistan , Vanuatu , Venezuela , Vietnam , Yemen , Zambia , Zimbabwe , Estonia , Nepal

Product Name:Titanium jigs and racks Material: Gr1, Gr2 Application: Electroplating, anodizing etc. Size: Customized Surface: Polished Titanium jigs and racks Universal jig and racks are suitable for a variety of parts and processes. The form and structure of general electroplating jigs shall be determined according to the geometry of plated parts, technical requirements of plating, process and size of equipment. Product Name:Titanium jigs and racks Material: Gr1, Gr2 Application: Electroplating, anodizing etc. Size: Customized Surface: Polished Precautions for use of titanium jigs and racks: 1. The distance from the bottom of titanium hanger to the groove bottom is 150-200mm; The concentration of working immersed electric part liquid is about 40-60mm away from the liquid level of the part. 2. The distance between titanium hanger and hanger surface is 20-40mm; And groove wall shall be greater than 50mm 3. When the titanium tools that can be used are operated manually, the loading weight is generally about 1-3kg; The position of titanium hanging rod shall be more than 80mm away from the liquid level and shall bear the whole load The features of our titanium jigs and racks: ✦Accurate size ✦High corrosion resistance ✦Cost-effective ✦Easy to load and unload ✦Improve electrical conductivity LADHANI METAL CORPORATION, MUMBAI, INDIA Company Information Ladhani Metal Corporation. We are committed to integrate engineering steel resources in India and serve the global engineering steel market. Our company has more than 32 years of experience in steel researching, production, managing and sales. In the aspect of resources and information, we have established cooperative and stronger relationship with nearly hundred enterprises, either state-owned or private owned in India. What’s more, we have built long, deep and close business relationship with dozens of steel company, Sharing and holding equities with several steel enterprises. Because of the close cooperation with steel companies and our pioneering spirit, which can ensure us stay at the top competition, and ensure our customers get what they really want! FOR MORE DETAIL CONTACT US AT :- ladhanimetal@gmail.com ladhanimetals@gmail.com www.ladhanimetal.in www.ladhanimetal.com LADHANI METAL CORPORATION, MUMABAI, INDIA, AVAILABLE AT FOLLOWING LOCATION:- Adilabad, Agartala, Agra, Ahmedabad, Ahmednagar, Ajmer, Akola , Aligarh , Alipore , Allahabad , Alleppey , Almora , Alwar , Alwaye , Amalapuram , Amaravati , Ambala , Amreli , Amritsar , Anakapalle , Anand , Anantapur , Andhra Pradesh , Anna Road , Arakkonam , Arunachal Pradesh , Asansol , Aska , Assam , Aurangabad , Azamgarh , Bagalkot , Bahraich , Balaghat , Balangir , Balasore , Ballia , Banasanktha , Banda , Bangalore , Bankura , Barabanki , Barabazaar , Baramulla , Barasat , Bardoli , Bareilly , Barmer , Bastar , Basti , Beawar , Beed , Begusarai , Belgaum , Bellary , Berhampur , Bhadrak , Bhagalpur , Bharatpur , Bharuch , Bhatinda , Bhavnagar , Bhilwara , Bhimavaram , Bhiwani , Bhojpur , Bhopal , Bhubaneswar , Bhusaval , Bidar , Bihar , Bijapur , Bijnor , Bikaner , Bilaspur , Birbhum , Budaun , Bulandshahar , Buldana , Burdwan , Cachar , Calcutta , Calicut , Cannanore , Chamba , Chamoli , Chandigarh , Chandrapur , Changanacherry , Channapatna , Chattisgarh , Chengalpattu , Chennai , Chhatarpur , Chhindwara , Chikmagalur , Chikodi , Chitradurga , Chittoor , Chittorgarh , Churu , Coimbatore , Contai , Cooch Behar , Cuddalore , Cuddapah , Cuttack , Darbhanga , Darjeeling , Darrang , Dehra Gopipur , Dehradun , Delhi , Delhi , Deoria , Dhanbad , Dharamsala , Dharmanagar , Dharmapuri , Dharwad , Dhenkanal , Dholpur , Dhule , Dibrugarh , Dinajpur , Dindigul , divisionname , Dungarpur , Durg , Eluru , Ernakulam , Erode , Etah , Etawah , Faizabad , Faridabad , Faridkot , Fatehgarh , Fatehpur , Ferozpur , Gadag , Gandhinagar , Gaya , Ghaziabad , Ghazipur , Giridih , Goa , Goalpara , Gokak , Gonda , Gondal , Gorakhpur , Gudivada , Gudur , Gujarat , Gulbarga , Guna , Guntur , Gurdaspur , Gurgaon , Guwahati , Gwalior , Hamirpur , Hanamkonda , Hardoi , Haryana , Hassan , Haveri , Hazaribagh , Himachal Pradesh , Hindupur , Hissar , Hooghly , Hoshangabad , Hoshiarpur , Howrah , Hyderabad , Idukki , Indore , Irinjalakuda , Jabalpur , Jaipur , Jalandhar , Jalgaon , Jalpaiguri , Jammu , Jammu kashmir , Jamnagar , Jaunpur , Jhansi , Jharkhand , Jhunjhunu , Jodhpur , Junagadh , Kakinada , Kalahandi , Kanchipuram , Kanniyakumari , Kanpur , Kapurthala , Karaikudi , Karimnagar , Karnal , Karnataka , Karur , Karwar , Kasaragod , Keonjhar , Kerala , Khammam , Khandwa , Kheda , Kheri , Kodagu , Kolar , Kolhapur , Kolkata , Koraput , Kota , Kottayam , Kovilpatti , Krishnagiri , Kumbakonam , Kurnool , Kurukshetra , Kutch , Lakshadweep , Leh , Lucknow , Ludhiana , Machilipatnam , Madhubani , Madhya Pradesh , Madurai , Mahabubnagar , Maharashtra , Mahesana , Mainpuri , Malda , Malegaon , Mandi , Mandsaur , Mandya , Mangalore , Manipur , Manjeri , Mathura , Mavelikara , Mayiladuthurai , Mayurbhanj , Medak , Meerut , Meghalaya , Midnapore , Mirzapur , Mizoram , Monghyr , Moradabad , Morena , Mumbai , Murshidabad , Muzaffarnagar , Muzaffarpur , Mysore , Nadia , Nagaland , Nagaon , Nagapattinam , Nagaur , Nagpur , Nainital , Nalanda , Nalbari , Nalgonda , Namakkal , Nanded , Nandyal , Nanjangud , Narasaraopet , Nasik , Navsari , Nawadha , Nellore , New Delhi , New Mumbai , Nilgiris , Nizamabad , North Eastern , Odisha , Osmanabad , Ottapalam , Palamau , Palghat , Pali , Panchmahals , Pandharpur , Parvathipuram , Patan , Pathanamthitta , Patiala , Patna , Pattukottai , Pauri , Peddapalli , Pharbhani , Phulbani , Pithoragarh , Pollachi , Pondicherry , Porbandar , Prakasam , Pratapgarh , Proddatur , Pudukkottai , Pune , Punjab , Puri , Purnea , Purulia , Puttur , Quilon , Rae Bareilly , Raichur , Raigad , Raigarh , Raipur , Rajahmundry , Rajasthan , Rajkot , Rajouri , Ramanathapuram , Rampur Bushahr , Ranchi , Ratlam , Ratnagiri , Rewa , Rohtak , Rohtas , Sabarkantha , Sagar , Saharanpur , Saharsa , Salem , Samastipur , Sambalpur , Sangareddy , Sangli , Sangrur , Santhal Parganas , Saran , Satara , Sawaimadhopur , Secunderabad , Sehore , Shahdol , Shahjahanpur , Shimla , Shimoga , Shrirampur , Sibsagar , Sikar , Sikkim , Sindhudurg , Singhbhum , Sirohi , Sirsi , Sitamarhi , Sitapur , Sivaganga , Siwan , Solan , Solapur , Sonepat , Sriganganagar , Srikakulam , Srinagar , Srirangam , Sultanpur , Sundargarh , Surat , Surendranagar , Suryapet , Tadepalligudem , Tambaram , Tamilnadu , Tamluk , Tehri , Tenali , Thalassery , Thane , Thanjavur , Theni , Tinsukia , Tiruchirapalli , Tirunelveli , Tirupati , Tirupattur , Tirupur , Tirur , Tiruvalla , Tiruvannamalai , Tonk , Trichur , Trivandrum , Tumkur , Tuticorin , Udaipur , Udhampur , Udupi , Ujjain , Una , Uttar Pradesh , Uttarakhand , Vadakara , Vadodara , Vaishali , Valsad , Varanasi , Vellore , Vidisha , Vijayawada , Virudhunagar , Visakhapatnam , Vizianagaram , Vriddhachalam , Wanaparthy , Warangal , Wardha , West Bengal , Yeotmal , Bangalore , Hyderabad , Chennai , Kolkata , Jaipur , Indore , Thane , Pimpri-Chinchwad , Nashik , Kalyan-Dombivli , Vasai-Virar , Varanasi , Navi Mumbai , Hubli–Dharwad , Tiruchirappalli , Tiruppur , Salem , Mira-Bhayandar , Bhiwandi , Amravati , Noida , Jamshedpur , Bhilai , Cuttack , Firozabad , Kochi , Durgapur , Rourkela , Loni , Siliguri , Ulhasnagar , Sangli-Miraj & Kupwad , Ambattur , Thiruvananthapuram , Davanagere , Kozhikode , Maheshtala , Rajpur Sonarpur , Bokaro , South Dumdum , Gopalpur , Bhatpara , Panihati , Latur , Korba , Kollam , Avadi , Kadapa , Kamarhati , Rampur , Thrissur , Bardhaman , Kulti , Parbhani , Ozhukarai , Bihar Sharif , Panipat , Bally , Aizawl , Dewas , Ichalkaranji , Bathinda , Jalna , Kirari Suleman Nagar , Purnia , Satna , Mau , Sonipat , Farrukhabad , Imphal , Hapur , Arrah , Ambarnath , North Dumdum , New Delhi , Gandhidham , Baranagar , Tiruvottiyur , Thoothukudi , Ramagundam , Silchar , Haridwar , Vijayanagaram , Nagercoil , Sri Ganganagar , Karawal Nagar , Mango , Bulandshahr , Uluberia , Katni , Sambhal , Singrauli , Nadiad , Naihati , Yamunanagar , Bidhannagar , Pallavaram , Munger , Panchkula , Burhanpur , Raurkela Industrial Township , Kharagpur , Hospet , Nangloi Jat , Ongole , Deoghar , Chapra , Haldia , Amroha , Bhind , Bhalswa Jahangir Pur , Madhyamgram , Berhampore , Morbi , Raebareli , Khora, Ghaziabad , Bhusawal , Orai , Phusro , Mehsana , Raiganj , Sirsa , Danapur , Serampore , Sultan Pur Majra , Panvel , Shivpuri , Surendranagar Dudhrej , Unnao , Chinsurah , Alappuzha , Adoni , Katihar , Mahbubnagar , Jorhat , Sasaram , Hajipur , Bongaigaon , Dehri , Madanapalle , Bettiah , Ramgarh , Guntakal , Motihari , Dharmavaram , Medininagar , Phagwara , Hosur , Miryalaguda , Tadipatri , Kishanganj , Jamalpur , Kavali , Buxar , Tezpur , Jehanabad , Gangtok , Assam , Bihar , Chattisgarh , Delhi , Gujarat , Haryana , Himachal Pradesh , Jammu kashmir , Jharkhand , Karnataka , Kerala , Madhya Pradesh , Maharashtra , Odisha , Punjab , Rajasthan , Tamilnadu , Uttar Pradesh , Uttarakhand , west Bengal WE EXPORT TO FOLLOWING COUTRIES Switzerland , Afghanistan , Albania , Algeria , Angola , AntiguaandBarbuda , Argentina , Armenia , Aruba , Australia , Austria , Azerbaijan , Bahrain , Bangladesh , Barbados , Belarus , Belgium , Belize , Benin , Bhutan , Bolivia , BosniaandHerzegovina , Botswana , Brazil , Brunei , Bulgaria , BurkinaFaso , Burundi , CaboVerde , Cambodia , Cameroon , Canada , CentralAfricanRepublic , Chad , Chile , China , Colombia , Comoros , Congo , CostaRica , Côted'Ivoire , Croatia , Cyprus , CzechRepublic , Denmark , Djibouti , Dominica , DominicanRepublic , Ecuador , Egypt , ElSalvador , EquatorialGuinea , Eritrea , Eswatini , Ethiopia , Fiji , Finland , France , Gabon , Georgia , Germany , Ghana , Greece , Grenada , Guatemala , Guinea , Guinea-Bissau , Guyana , Haiti , Honduras , HongKong , Hungary , Iceland , Indonesia , Iran , Iraq , Ireland , Israel , Italy , Jamaica , Japan , Jordan , Kazakhstan , Kenya , Kiribati , Kosovo , Kuwait , Kyrgyzstan , Laos , Latvia , Lebanon , Lesotho , Liberia , Libya , Lithuania , Luxembourg , Macau , Madagascar , Malawi , Malaysia , Maldives , Mali , Malta , MarshallIslands , Mauritania , Mauritius , Mexico , Micronesia,FederatedStatesof , Moldova , Mongolia , Montenegro , Morocco , Mozambique , Myanmar , Namibia , Nauru , Netherlands , NewZealand , Nicaragua , Niger , Nigeria , NorthMacedonia , Norway , Oman , Palau , Panama , PapuaNewGuinea , Paraguay , Peru , Philippines , Poland , Portugal , PuertoRico , Qatar , Romania , Russia , Rwanda , SaintKittsandNevis , SaintLucia , SaintVincentandtheGrenadines , Samoa , SanMarino , SãoToméandPríncipe , SaudiArabia , Senegal , Serbia , Seychelles , SierraLeone , Singapore , Slovakia , Slovenia , SolomonIslands , SouthAfrica , SouthKorea , SouthSudan , Spain , SriLanka , Sudan , Suriname , Sweden , Taiwan , Tajikistan , Tanzania , Thailand , TheBahamas , TheGambia , Timor-Leste , Togo , Tonga , TrinidadandTobago , Tunisia , Turkey , Turkmenistan , Tuvalu , Uganda , Ukraine , UnitedArabEmirates , UnitedKingdom , UnitedStates , Uruguay , Uzbekistan , Vanuatu , Venezuela , Vietnam , Yemen , Zambia , Zimbabwe , Estonia , Nepal