DIN 2632 duplex steel flanges PN 10 are robust weld neck flanges manufactured in accordance with the DIN 2632 standard, designed for medium-pressure applications up to 10 bar (145 psi). These flanges are made from duplex stainless steel, a material that combines the high strength of ferritic steel with the corrosion resistance of austenitic stainless steel. This dual-phase microstructure provides excellent resistance to stress corrosion cracking, pitting, and crevice corrosion in aggressive environments. Ladhani Metal Corporation is a reputable global manufacturer and supplier of duplex steel flanges, offering products with precise dimensions, superior mechanical integrity, and full compliance with international industry standards. All flanges are rigorously inspected and tested to ensure reliability in demanding applications. Pressure Rating: • PN 10 (10 bar / 145 psi): Ideal for medium-pressure piping systems requiring a balance of strength, corrosion resistance, and cost efficiency. Flange Type: • Weld Neck Flanges Engineered with a long tapered hub for secure and stress-reducing pipe-to-flange connections. Supports smooth fluid transition and minimizes turbulence. • Flat Face (FF) Flanges Flat face construction ensures even gasket compression, suitable for use with soft gasket materials and cast equipment. Duplex Steel Grades and Composition: Duplex 2205 (UNS S32205 / S31803) • Chromium (Cr): 21–23% • Nickel (Ni): 4.5–6.5% • Molybdenum (Mo): 2.5–3.5% • Nitrogen (N): 0.14–0.20% • Manganese (Mn): ≤ 2.0% • Carbon (C): ≤ 0.03% • Iron (Fe): Balance Applications: Duplex 2205 offers outstanding resistance to pitting, crevice corrosion, and chloride stress corrosion cracking. It is widely used in offshore platforms, chemical processing, marine environments, and desalination plants. Applications of DIN 2632 Duplex Steel Flanges PN 10: • Oil and Gas Industry Used in offshore and onshore systems handling sour gas, saltwater, and corrosive media. • Chemical and Petrochemical Ideal for reactors, heat exchangers, and piping exposed to acids, chlorides, and oxidizing substances. • Marine and Shipbuilding Provides excellent performance in seawater systems, ballast water treatment, and ship hull piping. • Desalination and Water Treatment Ensures long-term performance in high-salinity and high-chloride environments. • Pulp and Paper Applied in bleach plants and other areas exposed to aggressive chemical agents. Key Features: • Manufactured to DIN 2632 specifications • PN 10 pressure rating suitable for medium-pressure applications • Weld neck design for high-integrity, low-stress connections • Available in Duplex 2205 and Super Duplex 2507 for tailored corrosion resistance and strength • Flat face option for optimal gasket compression • Excellent resistance to stress corrosion cracking and pitting • High strength-to-weight ratio • Custom sizes, pressure classes, and finishes available upon request Conclusion: DIN 2632 duplex steel flanges PN 10 from Ladhani Metal Corporation provide a highly reliable, corrosion-resistant, and mechanically strong solution for demanding industrial applications. With advanced material options such as Duplex 2205 and Super Duplex 2507, these flanges are well-suited for marine, chemical, oil and gas, and water treatment sectors. For customized solutions, technical support, or pricing details, contact Ladhani Metal Corporation today

DIN 2632 Monel flanges PN 10 are high-performance weld neck flanges manufactured to meet the DIN 2632 standard, specifically designed for medium-pressure applications up to 10 bar (145 psi). These flanges are made from Monel, a nickel-copper alloy known for its outstanding corrosion resistance, particularly in marine and chemical environments. With excellent mechanical strength and superior durability in highly aggressive conditions, DIN 2632 Monel flanges provide a reliable solution where standard materials may fail. Ladhani Metal Corporation is a leading global manufacturer and supplier of Monel flanges, delivering consistent quality, dimensional accuracy, and full compliance with international standards. Each flange is meticulously tested to ensure optimum performance under demanding industrial conditions. Pressure Rating: • PN 10 (10 bar / 145 psi): Suitable for medium-pressure piping systems requiring high corrosion resistance and mechanical stability. Flange Type: • Weld Neck Flanges Designed with a long tapered hub that ensures precise pipe alignment and reduces localized stress at the flange connection. Ideal for high-integrity, high-strength joints. • Flat Face (FF) Flanges Flat face configuration ensures uniform gasket compression, making them ideal for systems using soft gaskets or connecting to cast components. Monel Grades and Composition: Monel 400 • Nickel (Ni): Minimum 63% • Copper (Cu): 28–34% • Iron (Fe): 2.0–2.5% • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 0.5% • Carbon (C): ≤ 0.3% Applications: Monel 400 is widely used in chemical and marine environments due to its excellent resistance to seawater, acids, and alkalis. It is commonly used in heat exchangers, seawater piping, pumps, and valves handling corrosive media. Monel K500 • Nickel (Ni): 63% minimum • Copper (Cu): 27–33% • Aluminum (Al): 2.3–3.15% • Titanium (Ti): 0.35–0.85% • Iron (Fe): ≤ 2.0% • Carbon (C): ≤ 0.25% Applications: Monel K500 combines the corrosion resistance of Monel 400 with greater strength and hardness due to age-hardening. It is used in marine shafts, chemical processing equipment, oil and gas tools, and high-strength fasteners. Applications of DIN 2632 Monel Flanges PN 10: • Marine and Offshore Ideal for seawater handling systems, shipbuilding, desalination units, and offshore platforms exposed to highly corrosive saltwater environments. • Chemical and Petrochemical Industry Used in pipelines and vessels transporting sulfuric acid, hydrofluoric acid, alkalis, and other aggressive substances. • Oil and Gas Industry Suitable for sour gas environments, offshore rigs, and subsea applications where corrosion and stress resistance are critical. • Power Generation Applied in cooling systems, condensers, and process equipment subjected to brine, steam, and corrosive gases. Key Features: • Fabricated to DIN 2632 specifications • PN 10 pressure rating for medium-pressure service • Weld neck and flat face designs available • Manufactured using Monel 400 and Monel K500 for corrosion-intensive applications • Exceptional resistance to seawater, acids, and alkalis • High strength and toughness even at elevated temperatures • Ideal for marine, chemical, and oil & gas industries • Custom dimensions, finishes, and alloy compositions available upon request Conclusion: DIN 2632 Monel Flanges PN 10 from Ladhani Metal Corporation are engineered to provide superior corrosion resistance, mechanical strength, and long-term reliability in medium-pressure industrial systems. With Monel grades 400 and K500, these flanges are well-suited for harsh environments in the marine, chemical, petrochemical, and offshore sectors. For detailed specifications, custom requirements, or pricing information, contact Ladhani Metal Corporation today.

DIN 2632 titanium flanges PN 10 are precision-fabricated weld neck flanges produced according to the DIN 2632 standard. These flanges are designed for medium-pressure applications up to 10 bar (145 psi), offering excellent corrosion resistance, strength, and durability in highly demanding industrial environments. Manufactured from high-grade titanium alloys, they provide outstanding performance in aggressive chemical, marine, and high-temperature settings where conventional materials may fail. Ladhani Metal Corporation is a trusted global manufacturer and supplier of titanium flanges, known for its consistent quality and engineering precision. Each flange is rigorously tested to ensure compliance with applicable industrial standards and environmental regulations. Pressure Rating: • PN 10 (10 bar / 145 psi): Suitable for medium-pressure pipeline systems requiring superior corrosion resistance and mechanical integrity. Flange Type: • Weld Neck Flanges Designed with a long tapered hub to ensure strong pipe alignment and reduce stress concentration at the flange base. This design supports smooth flow transitions and enhances joint strength. • Flat Face (FF) Flanges Flat face design promotes even gasket compression and is preferred for use with cast components or soft gasket materials. Titanium Grades and Composition: Grade 2 (Commercially Pure Titanium) • Titanium (Ti): ≥ 99.2% • Oxygen (O): ≤ 0.25% • Carbon (C): ≤ 0.08% • Nitrogen (N): ≤ 0.03% • Iron (Fe): ≤ 0.30% • Hydrogen (H): ≤ 0.015% Applications: Known for excellent corrosion resistance and good mechanical properties, Grade 2 titanium is commonly used in chemical processing, water treatment, and marine applications where corrosion resistance is critical. Grade 5 (Ti-6Al-4V Alloy) • Titanium (Ti): Balance • Aluminum (Al): 5.5 – 6.75% • Vanadium (V): 3.5 – 4.5% • Iron (Fe): ≤ 0.30% • Oxygen (O): ≤ 0.20% • Carbon (C): ≤ 0.08% • Nitrogen (N): ≤ 0.05% Applications: Grade 5 offers superior strength and excellent corrosion resistance, widely used in aerospace, marine, and high-performance chemical environments requiring higher mechanical properties. Applications of DIN 2632 Titanium Flanges PN 10: • Chemical and Petrochemical Industry Used in piping systems transporting aggressive acids, alkalis, and oxidizing substances. • Marine and Offshore Ideal for seawater piping, shipbuilding, and offshore platforms requiring corrosion-resistant materials. • Water Treatment and Desalination Applied in high-purity water systems and desalination plants operating at moderate pressures. • Aerospace and Power Generation Used in environments exposed to high temperatures and corrosive atmospheres. Key Features: • Compliant with DIN 2632 standards • PN 10 pressure rating for medium-pressure service • Weld neck design for robust pipe-flange connection • Available in Grade 2 and Grade 5 titanium alloys for tailored performance • Flat face option for even gasket contact • Lightweight with high strength-to-weight ratio • Suitable for harsh chemical and marine environments • Custom sizes, finishes, and titanium grades available upon request Conclusion: DIN 2632 Titanium Flanges PN 10 from Ladhani Metal Corporation offer a reliable and durable solution for medium-pressure applications demanding exceptional corrosion resistance and mechanical performance. Made from premium titanium alloys such as Grade 2 and Grade 5, these flanges are ideal for chemical, marine, desalination, aerospace, and power generation sectors. For custom dimensions, technical consultation, or pricing information, contact Ladhani Metal Corporation today.

DIN 2628 Monel flanges PN 250 are high-performance weld neck flanges engineered in compliance with the DIN 2628 standard. Designed for high-pressure applications up to 250 bar (3625 psi), these flanges are constructed from Monel alloys, known for their exceptional resistance to corrosion, particularly in acidic and saline environments. Monel flanges deliver robust mechanical strength and thermal stability, making them suitable for challenging industrial applications that involve fluctuating temperatures, corrosive substances, and high mechanical stress. Ladhani Metal Corporation is a reliable global manufacturer and exporter of Monel flanges, providing products that meet exacting international standards for quality and performance. Our DIN 2628 PN 250 Monel weld neck flanges are extensively used in chemical processing, marine engineering, desalination systems, and offshore oil and gas installations. Known for superior build quality and long-term durability, these flanges ensure safe and efficient operations in pressure-sensitive systems exposed to harsh service conditions. Pressure Rating: • PN 250 (250 bar / 3625 psi): Suitable for systems requiring high-pressure endurance, secure sealing capabilities, and enhanced structural integrity. Flange Type: • Weld Neck Flanges Characterized by a long tapered hub that minimizes stress at the weld junction. Ideal for high-temperature and high-pressure applications. • Flat Face (FF) Flanges Provides an even surface for gasket compression, ensuring reliable sealing. Well-suited for connections involving cast components or brittle materials. Monel Grades and Composition: Monel 400 (UNS N04400) • Nickel (Ni): ≥ 63.0% • Copper (Cu): 28.0 – 34.0% • Iron (Fe): ≤ 2.5% • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 0.5% • Carbon (C): ≤ 0.3% Applications: Offers excellent resistance to seawater, hydrofluoric acid, and alkalis. Commonly used in marine piping, pump shafts, heat exchangers, and chemical processing equipment. Monel K500 (UNS N05500) • Nickel (Ni): ≥ 63.0% • Copper (Cu): 27.0 – 33.0% • Aluminum (Al): 2.3 – 3.15% • Titanium (Ti): 0.35 – 0.85% • Iron (Fe): ≤ 2.0% • Carbon (C): ≤ 0.25% Applications: Precipitation-hardened alloy providing greater strength and hardness than Monel 400. Suitable for valves, springs, and high-strength fasteners in corrosive environments including marine and chemical processing systems. Applications of DIN 2628 Monel Flanges PN 250: • Marine Engineering Highly resistant to saltwater corrosion, suitable for shipbuilding, subsea pipelines, and desalination plants. • Chemical and Petrochemical Processing Performs well in environments containing strong acids, alkalis, and chlorinated solvents. • Offshore Oil and Gas Used in systems that handle sour gas, brine, and other corrosive fluids. • Power and Energy Ideal for condenser systems and piping exposed to high-pressure steam and corrosive environments. • Pulp and Paper Industry Effective in processes involving sulfur compounds and acidic bleaching agents. Key Features: • Designed in accordance with DIN 2628 specifications • Rated for PN 250 (250 bar / 3625 psi) pressure systems • Weld neck configuration ensures superior mechanical strength and fatigue resistance • Flat face option supports uniform gasket pressure distribution • Available in Monel 400 and Monel K500 grades • Excellent corrosion resistance in marine, chemical, and high-saline environments • High mechanical strength and good thermal performance • Custom dimensions, pressure classes, and surface finishes available on request Conclusion: DIN 2628 Monel Flanges PN 250 from Ladhani Metal Corporation are engineered for high-pressure systems operating in some of the most demanding service environments. With excellent resistance to corrosion, superior mechanical properties, and thermal stability, Monel flanges provide reliable, long-term service in critical applications across marine, chemical, and offshore industries. Contact Ladhani Metal Corporation for detailed product specifications, technical support, or to request a customized quote.

DIN 2576 Monel Flanges PN 10 are high-integrity, slip-on flanges manufactured from corrosion-resistant nickel-copper alloys, specifically designed for demanding low to medium-pressure applications. Compliant with the DIN 2576 standard, these flanges provide exceptional resistance to seawater, acids, alkalis, and corrosive chemicals, making them ideal for highly corrosive industrial environments. The slip-on design allows the flange to be positioned over the pipe and welded in place, ensuring precise alignment and long-term mechanical stability. Ladhani Metal Corporation is a trusted manufacturer and international supplier of Monel flanges, producing components that meet rigorous dimensional, metallurgical, and quality standards. DIN 2576 Monel flanges are widely used in marine, chemical, and oil and gas industries, where material durability and corrosion resistance are critical. Pressure Rating: • PN 10 (10 bar / 145 psi): Designed for systems requiring stable operation under moderate pressures in fluid and gas transport environments. Flange Types: • Slip-On Flanges Facilitate easy assembly by slipping over the pipe and welding on both sides to ensure a leak-proof and secure joint. • Flat Face (FF) Flanges Designed for use with flat gaskets and mating surfaces, offering even pressure distribution and sealing performance, particularly with brittle or non-metallic materials. Monel Grades and Composition: Monel 400 (UNS N04400) Composition: • Nickel (Ni): ≥ 63.0% • Copper (Cu): 28.0 – 34.0% • Iron (Fe), Manganese (Mn), Silicon (Si), Carbon (C): Trace amounts Applications: Monel 400 is well-known for its outstanding resistance to seawater, hydrofluoric acid, sulfuric acid, and alkalis. It is widely used in marine engineering, chemical processing, and heat exchangers. Monel K500 (UNS N05500) Composition: • Nickel (Ni): ≥ 63.0% • Copper (Cu): ~30.0% • Aluminum (Al): 2.3 – 3.15% • Titanium (Ti): 0.35 – 0.85% Applications: Monel K500 offers the same corrosion resistance as Monel 400 but with significantly higher strength and hardness due to age-hardening. It is ideal for high-stress applications such as pump shafts, valve components, and marine fasteners. Applications of DIN 2576 Monel Flanges: • Marine and Offshore Engineering Ideal for seawater exposure, ballast systems, and structural applications in shipbuilding and offshore platforms. • Chemical and Petrochemical Processing Used in piping systems exposed to strong acids, caustics, and other corrosive agents. • Oil and Gas Industry Suitable for sour gas (H₂S) environments, offshore drilling equipment, and refining systems. • Heat Exchangers and Condensers Monel's thermal conductivity and corrosion resistance make it suitable for tube sheets and connecting flanges. • Power Generation Applied in cooling systems, boiler feedwater lines, and other aggressive service environments. • Aerospace and Defense Used in fuel and hydraulic systems where resistance to corrosion and stress cracking is required. Key Features: • Manufactured according to DIN 2576 specification • PN 10 pressure rating for low to medium-pressure fluid systems • Exceptional resistance to seawater, acids, alkalis, and chlorides • Available in Monel 400 and Monel K500 grades • Slip-on design enables easy installation and welding • Flat face versions for compatibility with flat gaskets and brittle materials • Excellent mechanical properties and corrosion resistance • Custom dimensions, finishes, and face types available upon request Conclusion: DIN 2576 Monel Flanges PN 10 from Ladhani Metal Corporation deliver high corrosion resistance and mechanical strength for aggressive environments where conventional materials fail. With availability in Monel 400 and K500 grades, these flanges are suitable for marine, oil & gas, and chemical applications. For technical support, project consultation, or custom orders, contact Ladhani Metal Corporation today.

DIN 2569 Inconel Flanges PN 100 are precision-engineered welding neck flanges manufactured from high-performance Inconel alloys, designed for superior performance in extreme high-temperature, high-pressure, and corrosive industrial applications. Built to DIN 2569 standards, these flanges offer exceptional resistance to oxidation, corrosion, and high-stress environments, making them suitable for critical systems in industries such as aerospace, chemical processing, power generation, marine, and petrochemical. Ladhani Metal Corporation is a trusted manufacturer and exporter of Inconel flanges, providing products that meet rigorous international standards. The welding neck design ensures reliable, leak-proof connections, ideal for systems that require high strength, thermal stability, and resistance to thermal cycling. Pressure Rating: • PN 100 (100 bar / 1450 psi): Specifically designed for high-pressure systems that require outstanding sealing performance, mechanical reliability, and resistance to extreme temperatures and corrosive conditions. Flange Types: • Welding Neck Flanges Ensure high-strength, welded connections ideal for systems with continuous pressure, temperature cycles, and mechanical stress. • Raised Face (RF) Flanges Enhances sealing capability under high-pressure and elevated-temperature conditions. • Flat Face (FF) Flanges Used in systems with flat mating surfaces, especially where non-metallic or brittle materials are involved. • Forged Welding Neck Flanges Provide enhanced strength, impact resistance, and dimensional precision. • Custom-Machined Flanges Available in various sizes, pressure classes, and Inconel grades tailored to customer specifications. Inconel Grades and Composition: 1. Inconel 600 (Nickel-Chromium Alloy) Composition: • Nickel (Ni): Balance • Chromium (Cr): 14.0 – 17.0% • Iron (Fe): ≤ 6.0% • Carbon (C): ≤ 0.15% • Manganese (Mn): ≤ 1.0% • Silicon (Si): ≤ 0.50% Applications: Commonly used in chemical processing, heat exchangers, and systems exposed to high-temperature oxidation and carburization, as it provides excellent resistance to both oxidation and carburization. 2. Inconel 625 (Nickel-Chromium-Molybdenum Alloy) Composition: • Nickel (Ni): Balance • Chromium (Cr): 20.0 – 23.0% • Molybdenum (Mo): 8.0 – 10.0% • Iron (Fe): ≤ 5.0% Applications: Ideal for high-stress, high-temperature applications, such as jet engines, rocket motors, and heat exchangers, due to its outstanding fatigue and thermal-fatigue strength. 3. Inconel 718 (Nickel-Chromium Alloy) Composition: • Nickel (Ni): Balance • Chromium (Cr): 17.0 – 21.0% • Iron (Fe): ≤ 18.0% • Molybdenum (Mo): 2.8 – 3.3% • Niobium (Nb): 4.75 – 5.5% Applications: Used in highly demanding industries like aerospace and nuclear power generation, Inconel 718 is designed for applications requiring resistance to high-temperature and corrosion environments, along with high strength at elevated temperatures. Applications of DIN 2569 Inconel Flanges: • Aerospace and Aviation: Used in turbine engines, combustion chambers, and exhaust systems due to its ability to withstand high temperatures and oxidative environments. • Chemical and Petrochemical Plants: Ideal for processing plants handling aggressive chemicals, where Inconel’s resistance to oxidation and corrosion at high temperatures is critical. • Power Generation: Employed in steam turbines, gas turbines, and nuclear reactors where high strength and resistance to thermal expansion are necessary. • Marine Engineering: Perfect for seawater exposure and other harsh conditions, making it ideal for shipbuilding and offshore applications. • Heat Exchangers and Furnace Components: Used in applications requiring high thermal conductivity and resistance to heat-induced degradation. Key Features: • Manufactured to DIN 2569 standard • Available in PN 100 pressure rating • Excellent oxidation and corrosion resistance, particularly at high temperatures • High strength and fatigue resistance, ideal for demanding industrial environments • Welding neck design ensures permanent, high-integrity connections • Available with test certificates, quality documentation, and traceability • Suitable for polishing, pickling, passivation, and custom surface treatments Conclusion: DIN 2569 Inconel Flanges PN 100 from Ladhani Metal Corporation are designed for high-performance applications where superior strength, corrosion resistance, and high-temperature stability are required. Whether used in aerospace, petrochemical, power generation, or marine industries, these flanges provide long-lasting and reliable service. Customizable sizes and material grades are available for specific project needs. For further technical consultations or to place an order, contact Ladhani Metal Corporation today.

The DIN 2558 Monel Flange PN 6 is a precision-engineered piping component manufactured to meet DIN (Deutsches Institut für Normung) specifications. Made from high-performance Monel alloys—nickel-copper-based materials known for their outstanding resistance to corrosion, particularly in marine and chemical environments—these flanges offer exceptional durability and reliability in some of the most demanding industrial applications. Supplied by Ladhani Metal Corporation, these flanges are designed to provide a leak-free, long-lasting solution in medium-pressure systems. Monel flanges are widely used in industries such as marine engineering, chemical processing, hydrocarbon refining, heat exchangers, and offshore oil and gas production. Types: Weld Neck Flange – Offers a high-strength welded connection ideal for high-pressure and high-temperature systems. Slip-On Flange – Easy to install and align, welded on both sides for secure sealing. Blind Flange – Closes off the end of a pipeline or vessel, ensuring no fluid passes through. Threaded Flange – Allows for non-welded assembly, suitable for low-pressure piping systems. Socket Weld Flange – Designed for small-diameter, high-pressure applications requiring a smooth bore and strong weld. Grades & Chemical Composition: Monel 400 (UNS N04400): Nickel (Ni): ≥ 63.0% Copper (Cu): 28.0 – 34.0% Iron (Fe): ≤ 2.5% Manganese (Mn): ≤ 2.0% Carbon (C): ≤ 0.30% Silicon (Si): ≤ 0.50% Key Features: Excellent resistance to seawater, steam, salt, and caustic solutions; strong mechanical properties across a wide temperature range. Monel K500 (UNS N05500): Nickel (Ni): ≥ 63.0% Copper (Cu): 27.0 – 33.0% Aluminum (Al): 2.3 – 3.15% Titanium (Ti): 0.35 – 0.85% Iron (Fe): ≤ 2.0% Key Features: Combines the corrosion resistance of Monel 400 with higher strength and hardness due to age hardening; excellent resistance to sour gas and seawater environments. PN 6 Rating: The PN 6 rating signifies a nominal pressure class of 6 bar (87 psi), making these flanges ideal for medium-pressure systems where corrosion resistance is paramount, particularly in chloride-rich or alkaline environments. Features: Outstanding Corrosion Resistance: Especially effective in marine, saltwater, and chemical processing environments. High Strength and Toughness: Maintains structural integrity under mechanical stress and thermal fluctuations. Long Service Life: Designed for durability in aggressive media, reducing maintenance and replacement costs. Excellent Weldability: Compatible with standard welding techniques, allowing easy integration into piping systems. Versatile Industrial Use: Suitable for offshore platforms, shipbuilding, desalination, chemical plants, and heat exchangers. Leak-Proof Sealing: Precision manufacturing ensures tight connections that prevent leaks and system inefficiencies. Ladhani Metal Corporation ensures each DIN 2558 Monel Flange is manufactured with stringent quality control and tested for compliance with international standards. These flanges offer a reliable, corrosion-resistant solution for medium-pressure industrial systems operating in highly aggressive environments. #din2558 #din2558flanges #din2558monelflanges #monelflanges #flanges

DIN 2545 duplex flanges are designed to provide exceptional strength and corrosion resistance in demanding industrial applications. Ladhani Metal Corporation offers these high-quality flanges made from duplex stainless steel, which combines the best features of both austenitic and ferritic structures. This unique material provides superior resistance to pitting, crevice corrosion, and stress corrosion cracking, making it ideal for use in harsh environments. With a pressure rating of PN 40, these flanges are capable of handling pressures up to 40 bar, ensuring safe and reliable performance in industries such as chemical processing, oil and gas, marine, and offshore platforms. Types of DIN 2545 Duplex Flanges: Flat Face Flanges (FF) – These flanges have a flat surface that facilitates a uniform distribution of the sealing force, making them ideal for low-pressure applications or systems where a secure seal is essential. Raised Face Flanges (RF) – Featuring a raised face around the bolt holes, these flanges provide a higher sealing pressure, ensuring a more reliable seal, especially in higher-pressure environments. Ring-Type Joint (RTJ) Flanges – Designed with a groove for a metal sealing ring, these flanges are suitable for use in applications requiring high pressure and high temperature resistance. Grades and Chemical Composition: -Duplex 2205 (UNS S32205) Chemical Composition: Cr: 22%, Ni: 5-6%, Mo: 3%, N: 0.14-0.2%, Fe: balance Duplex 2205 is the most common duplex stainless steel grade. It offers excellent corrosion resistance in chloride environments, making it suitable for applications like seawater, chemical, and petrochemical processing. The combination of austenitic and ferritic phases gives Duplex 2205 higher strength compared to austenitic stainless steels, along with improved resistance to pitting and stress corrosion cracking. Super Duplex 2507 (UNS S32750) Chemical Composition: Cr: 25%, Ni: 7%, Mo: 4%, N: 0.27%, Fe: balance Super Duplex 2507 is a higher alloy version of Duplex 2205, offering superior resistance to chloride stress corrosion cracking, pitting, and crevice corrosion. It is used in more aggressive environments, such as offshore oil and gas applications, where the material must withstand high pressures and corrosive conditions. Its higher molybdenum and nitrogen content enhances its performance in severe environments. PN 40 Pressure Rating: The "PN" in DIN 2545 refers to the pressure rating, and PN 40 indicates that the flange is designed to handle pressures up to 40 bar. This ensures that the flange is robust and reliable under high-pressure conditions, maintaining secure and leak-proof connections in critical applications. Applications: Oil and Gas Industry: These flanges are widely used in offshore and onshore pipelines, pressure vessels, and other critical infrastructure in oil and gas exploration, extraction, and transportation. Chemical and Petrochemical Industry: Due to their excellent resistance to corrosion, especially in acidic or chloride-rich environments, they are ideal for use in reactors, heat exchangers, and pipelines handling chemicals and petrochemicals. Marine and Offshore Applications: Duplex flanges are highly resistant to seawater corrosion, making them ideal for use in marine environments, such as shipbuilding, offshore rigs, and seawater cooling systems. Water Treatment Plants: These flanges are used in systems that handle aggressive water environments, ensuring durability and long service life in water and wastewater treatment applications. Power Generation: In power plants, these flanges are used in steam lines, cooling systems, and heat exchangers, where strength, corrosion resistance, and high-pressure capabilities are critical. Pharmaceutical Industry: These flanges are used in systems requiring sanitary conditions and resistance to aggressive cleaning solutions, such as in the transportation of chemicals or in reaction vessels. Key Benefits of Duplex Flanges (PN 40): Exceptional strength and corrosion resistance. Resistance to pitting and crevice corrosion. Excellent performance in harsh environments. Cost-effective compared to higher-grade materials for similar applications. DIN 2545 Duplex Flanges (PN 40) are a reliable choice for high-pressure applications in industries that demand both high performance and durability. #din2545 #din2545flanges #din2545duplexflanges #flanges

Product name:Titanium sheet metal Unit price:$14-$36.9/kg Material: Titanium grade 1 grade 2 grade 3 grade 4 Grade 5 (Ti6al4v),grade 7,grade 12 etc. Standard: ASTM/ASME B265 AMS 4911 ASTM F136 ASTM F67 etc. Demension: Thickness*1000*2000mm Thickness*3000*6000mm (Standard size); Thickness: 0.5mm; 0.8mm; 1.0mm; 1.2mm; 1.5mm; 2.0mm; 3.0mm; 4.0mm ......40mm etc br>Technique : Rolled Status: Annealed(M) Titanium has many obviously superior characteristics: small density (4.5kg/m3), high melting point (1660℃), strong corrosion resistance, high specific strength, good plasticity, but also through alloying and heat treatment methods to produce a variety of alloys with high mechanical properties, is an ideal aerospace engineering structural materials. Titanium sheet metal are commonly used in today's manufacturing industry, and the most commonly used grades are 2 and 5. Grade 2 titanium Grade 2 is commercial pure titanium used in most chemical processing plants and can be cold formed. Ultimate tensile strength of grade 2 plates and sheets up to 40,000 psi and above. Grade 5 titanium Class 5 is an aerospace class that does not allow cold molding and is therefore used more often when molding is not required. Grade 5 aerospace alloys have ultimate tensile strength of 120,000 psi and above. Usually the purpose of using Titanium sheet metal is to really approximate the final size of the part being manufactured. The material is processed to the nearest size of the required parts and the grain structure of the finished product is more uniform. Titanium plates are often used as insulation because titanium prevents heat from being transferred to the rest of the assembly. The titanium plate and titanium plate are bulletproof and provide good protection for the driver during the race. Application example: in addition to the use of industrial pure titanium manufacturing parts, a large number of titanium alloy is used. It is increasingly widely used in aerospace, aerospace, chemical, shipbuilding and other industrial sectors, manufacturing gas turbine components, the production of prosthetic devices and other biological materials