Thank you for writing to us. One of our executive will reach back to you through your submitted medium. In case there’s an urgency, feel free to connect over WhatsApp for faster response.
Prefer calling? Dial +919029362692 (International callers) or +919029362692 (Indian callers).
Product name: Gr2 titanium tubes 19mm
Standard:ASTM B338
Material:Titanium Gr1, Gr2, Gr5, Gr7, Gr9, Gr11, Gr12, etc.
Diameter:5-914mm
Wall thickness:0.5-10mm
Length:Max 16000mm
Surface:Pickling surface/Polished
Type:Seamless, welded
Application:Heat Exchanger, chemical industry etc.
Technique:Rolled
Gr2 titanium tubes 19mm
Titanium tube has been widely used in chemical industry, petroleum, petrochemical, vacuum salt, preparation, ocean engineering, electric power and other industries. Titanium is widely used in corrosive media due to its good corrosion resistance, such as ionic membrane caustic soda, propylene oxide and so on. Titanium materials have been widely used in equipment and pipelines. Product media are also used in formic acid, methane chloride and other projects to solve the problem of pipeline corrosion.
Product Name
Titanium tube/tubes/pipe/pipes/tubing
Standard
ASTM B338/ASME SB338, ASTM B337/ASME SB337, ASTM B861/ASME SB861, ASTM B862/ASME SB862
Material
Gr1, Gr2, Gr5, Gr7, Gr9, Gr11, Gr12, etc
Size(mm)
Diameter 5-914*Wall thcikness 0.5*10mm*L max 16000mm
Section shape
Round
Certification
ISO9001
Surface Treatment
Pickling, polished, bright finish
Feature
1.Low Density and High Strength 2.Excellent Corrosion Resistance 3.Good resistance to effect of heat 4.Excellent Bearing to cryogenic property 5.Nonmagnetic and Non-toxic
6.Good thermal properties
7.Low Modulus of Elasticity
Corrosion of titanium tubes is a serious destructive factor in industrial development. According to relevant media reports, the annual steel loss caused by corrosion is more than 10,000 tons, and the product transportation has damage and corrosive media, with dangerous factors. Therefore, the higher the requirements for titanium alloy pipe fittings. Titanium has the advantages of high strength, light weight, good heat transfer performance and corrosion resistance, and has been widely used in chemical industry. Titanium of these features make it a solution to the problem of chemical related engineering relative economic method, although the investment cost is higher than the general performance of titanium material, but titanium has been widely used in the field of chemical industry, based on life cycle analysis, can use it by reducing maintenance, shorten downtime, increase product quality and increase the product life to reduce the cost of production.
Chemical Composition
Grade
N
C
H
Fe
O
Al
V
Pa
Mo
Ni
Ti
Gr1
0.03
0.08
0.015
0.2
0.18
/
/
/
/
/
bal
Gr2
0.03
0.08
0.015
0.3
0.25
/
/
/
/
/
bal
Gr3
0.05
0.08
0.015
0.3
0.35
/
/
/
/
/
bal
Gr4
0.05
0.08
0.015
0.5
0.4
/
/
/
/
/
Gr5
0.05
0.08
0.015
0.4
0.2
5.5~6.75
3.5~4.5
/
/
/
bal
Gr7
0.03
0.08
0.015
0.3
0.25
/
/
0.12~0.25
/
/
bal
Gr9
0.03
0.08
0.015
0.25
0.15
2.5~3.5
2.0~3.0
/
/
/
bal
Gr12
0.03
0.08
0.015
0.3
0.25
/
/
/
0.2~0.4
0.6~0.9
bal
Product name:Gr2 titanium dome dish heads
Standard: ASME VIII-I, DIN28013
Material: GR1, GR2, GR7, GR12
Size: Customized
Gr2 titanium dome dish heads
A dish head is a part of a container that is welded to the cylinder. According to the different geometric shapes, it can be divided into spherical, oval, disc, spherical crown, vertebral shell and cap. The sphere, the ellipse,disc head is also referred to as convex head. In the welding way is divided into butt welding head, socket welding head, used for all kinds of container equipment, such as storage tanks, heat exchanger, tower, reactor, boiler and separation equipment. Materials are carbon steel, stainless steel, alloy steel, aluminum, titanium, copper, nickel and nickel alloy etc
Dish head is an indispensable and important part of pressure vessel equipment in petrochemical, atomic energy and food and pharmaceutical industries.
Standard: ASME VIII-I, DIN28013
Thickness:5-100mm
Size: Customized
Material: GR1, GR2, GR7, GR12
High temperature resistant:100-1000°℃
Resistance to high pressure:0.25-100kg
Application:Pressure vessel equipment
Grade
Fe max
O max
N max
C max
H max
Pd
Al
V
Mo
Ni
Elong'n
Σb
(Mpa)
σr0.2
(Mpa)
No
wt%
wt%
wt%
wt%
wt%
wt%
wt%
wt%
wt%
wt%
%
MPa
MPa
Grade 1
0.2
0.18
0.03
0.1
0.015
24
240
140
Grade 2
0.3
0.25
0.03
0.1
0.015
20
400
275
Grade 7
0.3
0.25
0.03
0.1
0.015
0,12-0,25
20
400
275
Grade 12
0.3
0.25
0.03
0.1
0.015
0.3
0.8
18
460
300
Product Name: Titanium Anode Basket
Material: Gr1, Gr2
Size: Customized
Application: Anodizing Electroplating Plating
Shape: Rectangular, round and spiral etc
Characteristics
1. Used in the electroplating industry, it can effectively control the ratio of anode to cathode;
2. The anode has good solubility and produces less anode mud;
3. It is convenient to load or supplement anode materials;
4. The anode material is fully used, saving energy consumption;
5. Titanium basket has the characteristics of acid resistance, alkali resistance, corrosion resistance, high temperature resistance and high strength;
6. Titanium basket uses a mesh drawn from industrial pure titanium plates, which has high tensile strength and durability.
Chemical composition (Wt%)
ASTM No.
Fe max
O max
N max
C max
H max
Pd
Al
Bal
Grade 1
0.2
0.18
0.03
0.1
0.015
-
-
Ti
Grade 2
0.3
0.25
0.03
0.1
0.015
-
-
Ti
Physical Properties (Min)
ASTM Grade
Alloy Composition
Tensile Strength
Yield Strength
Elongation min %
ksi
Mpa
ksi
Mpa
Grade 1
Unalloyed Ti ("Pure") 35A -CP1
35
240
25
170
30
Grade 2
Unalloyed Ti ("Pure") 50A -CP2
58
400
40
275
25
Product name: Gr2 Titanium Welded pipe
Standard:ASTM B338 ASTM B862
Material: GR1 GR2 GR7 GR12
Diameter:10-914mm
Wall thickness:0.5-10mm
Length:Max 16000mm
Surface:Pickling surface/Polished
Type:Seamless, welded
Application:Heat Exchanger, chemical industry etc.
Technique:Rolled
Gr2 Titanium welded Tube
With the progress of titanium welded pipe welding and heat treatment technology, the titanium thin wall welded pipe widely used single or multiple gun gun TIG/PAW from fusion welding, after welding using on-line heat treatment process, through optimizing welding, annealing process, make the parent metal, weld and heat affected zone microstructure close, basically eliminate the welding stress at the same time, make the weld microstructure of homogenization. By comparison, it is found that the weld composition of the titanium welded pipe is basically the same as that of the base metal, and the mechanical properties and anti-corrosion properties of the weld are the same as those of the base metal. Widely used in petrochemical industry, exhaust pipe industry, machinery industry and so on.
Product Name
Titanium welded tube/tubes/pipe/pipes/tubing
Standard
ASTM B338/ASME SB338, ASTM B337/ASME SB337, ASTM B862/ASME SB862
Material
Gr1, Gr2, Gr7, Gr12, etc.
Length
≤16000mm
Size(mm)
Diameter 10-914mm
Section shape
Round
Certification
ISO9001:2015
Surface Treatment
pickling, polished, bright finish etc.
Feature
1.Low Density and High Strength 2.Excellent Corrosion Resistance 3.Good resistance to effect of heat 4.Excellent Bearing to cryogenic property 5.Nonmagnetic and Non-toxic
6.Good thermal properties
7.Low Modulus of Elasticity
In order to study the application technology of ultra-thin wall titanium welded pipe in the distillation seawater desalination, experts have studied and analyzed the heat exchange performance, mechanical performance, corrosion performance, preventing microbial adhesion and precipitation of non-condensible gas of ultra-thin wall titanium welded pipe, and compared with copper pipe, stainless steel pipe. The results show that the ultra-thin wall titanium welded pipe is the core component of distillation seawater desalination equipment, its wall thickness has been used in batches of 0.4mm, or even thinner, the product has excellent heat exchange performance, mechanical properties, corrosion resistance, is the preferred material of distillation seawater desalination heat exchange tube.
Product name: Gr2 titanium tubes 19mm
Standard:ASTM B338
Material:Titanium Gr1, Gr2, Gr5, Gr7, Gr9, Gr11, Gr12, etc.
Diameter:5-914mm
Wall thickness:0.5-10mm
Length:Max 16000mm
Surface:Pickling surface/Polished
Type:Seamless, welded
Application:Heat Exchanger, chemical industry etc.
Technique:Rolled
Gr2 titanium tubes 19mm
Titanium tube has been widely used in chemical industry, petroleum, petrochemical, vacuum salt, preparation, ocean engineering, electric power and other industries. Titanium is widely used in corrosive media due to its good corrosion resistance, such as ionic membrane caustic soda, propylene oxide and so on. Titanium materials have been widely used in equipment and pipelines. Product media are also used in formic acid, methane chloride and other projects to solve the problem of pipeline corrosion.
Product Name
Titanium tube/tubes/pipe/pipes/tubing
Standard
ASTM B338/ASME SB338, ASTM B337/ASME SB337, ASTM B861/ASME SB861, ASTM B862/ASME SB862
Material
Gr1, Gr2, Gr5, Gr7, Gr9, Gr11, Gr12, etc
Size(mm)
Diameter 5-914*Wall thcikness 0.5*10mm*L max 16000mm
Section shape
Round
Certification
ISO9001
Surface Treatment
Pickling, polished, bright finish
Feature
1.Low Density and High Strength 2.Excellent Corrosion Resistance 3.Good resistance to effect of heat 4.Excellent Bearing to cryogenic property 5.Nonmagnetic and Non-toxic
6.Good thermal properties
7.Low Modulus of Elasticity
Corrosion of titanium tubes is a serious destructive factor in industrial development. According to relevant media reports, the annual steel loss caused by corrosion is more than 10,000 tons, and the product transportation has damage and corrosive media, with dangerous factors. Therefore, the higher the requirements for titanium alloy pipe fittings. Titanium has the advantages of high strength, light weight, good heat transfer performance and corrosion resistance, and has been widely used in chemical industry. Titanium of these features make it a solution to the problem of chemical related engineering relative economic method, although the investment cost is higher than the general performance of titanium material, but titanium has been widely used in the field of chemical industry, based on life cycle analysis, can use it by reducing maintenance, shorten downtime, increase product quality and increase the product life to reduce the cost of production.
Chemical Composition
Grade
N
C
H
Fe
O
Al
V
Pa
Mo
Ni
Ti
Gr1
0.03
0.08
0.015
0.2
0.18
/
/
/
/
/
bal
Gr2
0.03
0.08
0.015
0.3
0.25
/
/
/
/
/
bal
Gr3
0.05
0.08
0.015
0.3
0.35
/
/
/
/
/
bal
Gr4
0.05
0.08
0.015
0.5
0.4
/
/
/
/
/
Gr5
0.05
0.08
0.015
0.4
0.2
5.5~6.75
3.5~4.5
/
/
/
bal
Gr7
0.03
0.08
0.015
0.3
0.25
/
/
0.12~0.25
/
/
bal
Gr9
0.03
0.08
0.015
0.25
0.15
2.5~3.5
2.0~3.0
/
/
/
bal
Gr12
0.03
0.08
0.015
0.3
0.25
/
/
/
0.2~0.4
0.6~0.9
bal