Thank you for writing to us. One of our executive will reach back to you through your submitted medium. In case there’s an urgency, feel free to connect over WhatsApp for faster response.
Prefer calling? Dial +919029362692 (International callers) or +919029362692 (Indian callers).
Product name: Gr2 titanium tubes 19mm
Standard:ASTM B338
Material:Titanium Gr1, Gr2, Gr5, Gr7, Gr9, Gr11, Gr12, etc.
Diameter:5-914mm
Wall thickness:0.5-10mm
Length:Max 16000mm
Surface:Pickling surface/Polished
Type:Seamless, welded
Application:Heat Exchanger, chemical industry etc.
Technique:Rolled
Gr2 titanium tubes 19mm
Titanium tube has been widely used in chemical industry, petroleum, petrochemical, vacuum salt, preparation, ocean engineering, electric power and other industries. Titanium is widely used in corrosive media due to its good corrosion resistance, such as ionic membrane caustic soda, propylene oxide and so on. Titanium materials have been widely used in equipment and pipelines. Product media are also used in formic acid, methane chloride and other projects to solve the problem of pipeline corrosion.
Product Name
Titanium tube/tubes/pipe/pipes/tubing
Standard
ASTM B338/ASME SB338, ASTM B337/ASME SB337, ASTM B861/ASME SB861, ASTM B862/ASME SB862
Material
Gr1, Gr2, Gr5, Gr7, Gr9, Gr11, Gr12, etc
Size(mm)
Diameter 5-914*Wall thcikness 0.5*10mm*L max 16000mm
Section shape
Round
Certification
ISO9001
Surface Treatment
Pickling, polished, bright finish
Feature
1.Low Density and High Strength 2.Excellent Corrosion Resistance 3.Good resistance to effect of heat 4.Excellent Bearing to cryogenic property 5.Nonmagnetic and Non-toxic
6.Good thermal properties
7.Low Modulus of Elasticity
Corrosion of titanium tubes is a serious destructive factor in industrial development. According to relevant media reports, the annual steel loss caused by corrosion is more than 10,000 tons, and the product transportation has damage and corrosive media, with dangerous factors. Therefore, the higher the requirements for titanium alloy pipe fittings. Titanium has the advantages of high strength, light weight, good heat transfer performance and corrosion resistance, and has been widely used in chemical industry. Titanium of these features make it a solution to the problem of chemical related engineering relative economic method, although the investment cost is higher than the general performance of titanium material, but titanium has been widely used in the field of chemical industry, based on life cycle analysis, can use it by reducing maintenance, shorten downtime, increase product quality and increase the product life to reduce the cost of production.
Chemical Composition
Grade
N
C
H
Fe
O
Al
V
Pa
Mo
Ni
Ti
Gr1
0.03
0.08
0.015
0.2
0.18
/
/
/
/
/
bal
Gr2
0.03
0.08
0.015
0.3
0.25
/
/
/
/
/
bal
Gr3
0.05
0.08
0.015
0.3
0.35
/
/
/
/
/
bal
Gr4
0.05
0.08
0.015
0.5
0.4
/
/
/
/
/
Gr5
0.05
0.08
0.015
0.4
0.2
5.5~6.75
3.5~4.5
/
/
/
bal
Gr7
0.03
0.08
0.015
0.3
0.25
/
/
0.12~0.25
/
/
bal
Gr9
0.03
0.08
0.015
0.25
0.15
2.5~3.5
2.0~3.0
/
/
/
bal
Gr12
0.03
0.08
0.015
0.3
0.25
/
/
/
0.2~0.4
0.6~0.9
bal
Titanium jigs for plating
Any project to anodize requires a reliable hanger/jig/rack, first to prevent it from falling to the bottom of the anodizing tank, and second to allow the current to be safely transferred from the jig to the workpiece. Anodic oxidation clamps are usually made of aluminum or titanium. Aluminum fixtures must of course be anodized and must be chemically stripped. Continuous anodizing and stripping can result in short service life, so there is no need to strip titanium after the anodizing process.
Item Name: titanium jig for coating
Size:Customized size is welcomed
Material: Titanium Gr1, Gr2
Application,Electroplating industry
Surface:Sand Blasting, Acid Washing
Parameter:Current density≤2000A/M2
Temperature:<65°C
PH: 0.1~14
Max content of Fluoride ion is 200PPM
Chemical composition (Wt%)
ASTM No.
Fe max
O max
N max
C max
H max
Pd
Al
Bal
Grade 1
0.2
0.18
0.03
0.1
0.015
-
-
Ti
Grade 2
0.3
0.25
0.03
0.1
0.015
-
-
Ti
Physical Properties (Min)
ASTM Grade
Alloy Composition
Tensile Strength
Yield Strength
Elongation min %
ksi
Mpa
ksi
Mpa
Grade 1
Unalloyed Ti ("Pure") 35A -CP1
35
240
25
170
30
Grade 2
Unalloyed Ti ("Pure") 50A -CP2
58
400
40
275
25
Product name:Gr2 titanium dome dish heads
Standard: ASME VIII-I, DIN28013
Material: GR1, GR2, GR7, GR12
Size: Customized
Gr2 titanium dome dish heads
A dish head is a part of a container that is welded to the cylinder. According to the different geometric shapes, it can be divided into spherical, oval, disc, spherical crown, vertebral shell and cap. The sphere, the ellipse,disc head is also referred to as convex head. In the welding way is divided into butt welding head, socket welding head, used for all kinds of container equipment, such as storage tanks, heat exchanger, tower, reactor, boiler and separation equipment. Materials are carbon steel, stainless steel, alloy steel, aluminum, titanium, copper, nickel and nickel alloy etc
Dish head is an indispensable and important part of pressure vessel equipment in petrochemical, atomic energy and food and pharmaceutical industries.
Standard: ASME VIII-I, DIN28013
Thickness:5-100mm
Size: Customized
Material: GR1, GR2, GR7, GR12
High temperature resistant:100-1000°℃
Resistance to high pressure:0.25-100kg
Application:Pressure vessel equipment
Grade
Fe max
O max
N max
C max
H max
Pd
Al
V
Mo
Ni
Elong'n
Σb
(Mpa)
σr0.2
(Mpa)
No
wt%
wt%
wt%
wt%
wt%
wt%
wt%
wt%
wt%
wt%
%
MPa
MPa
Grade 1
0.2
0.18
0.03
0.1
0.015
24
240
140
Grade 2
0.3
0.25
0.03
0.1
0.015
20
400
275
Grade 7
0.3
0.25
0.03
0.1
0.015
0,12-0,25
20
400
275
Grade 12
0.3
0.25
0.03
0.1
0.015
0.3
0.8
18
460
300
Product Name: Titanium Anode Basket
Material: Gr1, Gr2
Size: Customized
Application: Anodizing Electroplating Plating
Shape: Rectangular, round and spiral etc
Characteristics
1. Used in the electroplating industry, it can effectively control the ratio of anode to cathode;
2. The anode has good solubility and produces less anode mud;
3. It is convenient to load or supplement anode materials;
4. The anode material is fully used, saving energy consumption;
5. Titanium basket has the characteristics of acid resistance, alkali resistance, corrosion resistance, high temperature resistance and high strength;
6. Titanium basket uses a mesh drawn from industrial pure titanium plates, which has high tensile strength and durability.
Chemical composition (Wt%)
ASTM No.
Fe max
O max
N max
C max
H max
Pd
Al
Bal
Grade 1
0.2
0.18
0.03
0.1
0.015
-
-
Ti
Grade 2
0.3
0.25
0.03
0.1
0.015
-
-
Ti
Physical Properties (Min)
ASTM Grade
Alloy Composition
Tensile Strength
Yield Strength
Elongation min %
ksi
Mpa
ksi
Mpa
Grade 1
Unalloyed Ti ("Pure") 35A -CP1
35
240
25
170
30
Grade 2
Unalloyed Ti ("Pure") 50A -CP2
58
400
40
275
25
Product name: ASTM B338 titanium Seamless Tubes for Condensers
Standard:ASTM B338 ASTM B861 ASTM B862
Material:Titanium Gr7
Diameter:5-914mm
Wall thickness:0.5-50mm
Length:Max 16000mm
Surface:Pickling surface/Polished
Type:Seamless, welded
Application:Heat Exchanger, chemical industry etc.
Technique:Rolled
ASTM B338 titanium Seamless Tubes for Condensers
ASTM B338 Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers
ASTM B338 covers 28 grades of seamless and welded titanium alloy tubes for surface condensers, evaporators, and heat exchangers.
Standard
ASTM B338, ASME SB338
Regular Grade
Grade 1 Grade 2
Outer Diameter
12.7mm 15mm 17mm 19mm 25.4mm 31mm etc.
Wall thickness
0.9mm/1.0mm/1.2mm/1.5mm
Length
3000 - 6000mm or other economical lengths
Finish
Polished, AP (Annealed & Pickled), BA (Bright & Annealed), MF
Form
Straight titanium Pipe, Coiled titanium tube
Type
Seamless, ERW, EFW, Welded, Fabricated
End
Plain End, Beveled End, Treaded
Marking
Standard, Grade, OD, Thickness, Length, Heat No. (Or as per customer's request.)
Application
Oil Tube, Gas Tube, Fluid Tube, Boiler and Heat exchanger
Value Added Service
Draw & Expansion as per required Size & Length, Polish (Electro & Commercial) Annealed & Pickled
Bending, Machining Etc.
Test Certificate
Mill Test Certificate EN 10204/3.1,TPI Report, EN10204/3.2
Precautions for titanium pipe processing:
During the deformation process, titanium pipe will gradually reduce wall and diameter with the rotation and feeding of the rolling mill. The pipe size required by the process can be obtained only after 5 ~ 10 rolling and finishing in one rolling pass. The cold rolling pipe mill can carry out large diameter reduction and wall reduction, but the dimensional accuracy is low after rolling, and the pipe end is prone to cracking, uneven concave convex and other phenomena. The cracking phenomenon can be solved mainly by grinding and leveling before pipe blank processing; For the uneven pipe end, similar to the "fish mouth" phenomenon, flat head treatment is required in the subsequent processing process, otherwise it will cause the plug stuffy accident. Therefore, this paper analyzes from the aspects of process, tooling and equipment, in order to find out the causes of uneven concave convex of pipe end and take effective measures to solve it.
Chemical composition (Wt%)
ASTM No.
Fe max
O max
N max
C max
H max
Pd
Al
Bal
Grade 1
0.2
0.18
0.03
0.1
0.015
-
-
Ti
Grade 2
0.3
0.25
0.03
0.1
0.015
-
-
Ti
Physical Properties (Min)
ASTM Grade
Alloy Composition
Tensile Strength
Yield Strength
Elongation min %
ksi
Mpa
ksi
Mpa
Grade 1
Unalloyed Ti ("Pure") 35A -CP1
35
240
25
170
30
Grade 2
Unalloyed Ti ("Pure") 50A -CP2
58
400
40
275
25
