The DIN 2558 Carbon Steel Flange PN 6 is a reliable, high-strength component designed for use in industrial piping systems that operate under moderate pressure conditions. Manufactured in accordance with DIN (Deutsches Institut für Normung) standards, these flanges are crafted from robust carbon steel, offering excellent mechanical performance, structural integrity, and cost-efficiency. Supplied by Ladhani Metal Corporation, these flanges are widely used in applications where strength, weldability, and durability are essential. Carbon steel flanges are suitable for a variety of industries including oil and gas, power generation, water treatment, construction, petrochemical, and HVAC systems. With a PN 6 pressure rating (6 bar or approximately 87 psi), these flanges are ideal for medium-pressure systems requiring a dependable, leak-proof connection. Types: Weld Neck Flange – Offers a strong, welded joint that ensures stability and leak resistance in high-load systems. Slip-On Flange – Slides easily over the pipe and is welded on both sides, making installation straightforward and cost-effective. Blind Flange – Used to seal the end of a pipe or pressure vessel, providing a secure barrier against flow. Threaded Flange – Designed for quick assembly in low-pressure systems without the need for welding. Socket Weld Flange – Ideal for smaller-diameter high-pressure lines, ensuring a smooth bore and strong weld. Common Grades & Chemical Composition: ASTM A105 (Forged Carbon Steel): Carbon (C): ≤ 0.35% Manganese (Mn): 0.60 – 1.05% Phosphorus (P): ≤ 0.035% Sulfur (S): ≤ 0.040% Silicon (Si): 0.10 – 0.35% Key Features: High strength and toughness; suitable for ambient- and high-temperature services; commonly used in forging pressure system components. ASTM A350 LF2 (Low-Temperature Carbon Steel): Carbon (C): ≤ 0.30% Manganese (Mn): 0.60 – 1.35% Silicon (Si): 0.15 – 0.30% Phosphorus (P): ≤ 0.035% Sulfur (S): ≤ 0.040% Key Features: Improved impact resistance at low temperatures; used in cryogenic and sub-zero applications. PN 6 Rating: The PN 6 pressure class corresponds to 6 bar (approximately 87 psi), making these flanges suitable for low- to medium-pressure pipelines and systems in water distribution, oil, gas, and industrial utility applications. Features: High Strength: Carbon steel provides excellent tensile and yield strength for structural stability and performance under pressure. Cost-Effective: Offers a strong balance between performance and affordability, especially for general-purpose piping systems. Good Weldability: Easily joined using standard welding techniques, making them suitable for custom pipeline fabrication. Versatile Application: Used across a wide range of sectors including petrochemical plants, power plants, and water distribution systems. Long Service Life: Durable and resistant to mechanical stress, especially when protected with coatings or galvanizing. Easy Fabrication: Can be machined and modified with ease to meet project-specific requirements. Ladhani Metal Corporation ensures that each DIN 2558 Carbon Steel Flange is manufactured with strict quality control, precision machining, and compliance with global standards. These flanges offer a practical and long-lasting solution for medium-pressure industrial piping systems where reliability, strength, and cost-efficiency are key.

The DIN 2558 Inconel Flange PN 6 is a precision-engineered flange designed to perform under extreme conditions involving high temperatures, corrosive media, and mechanical stress. Manufactured according to DIN (Deutsches Institut für Normung) standards, these flanges are made from advanced Inconel alloys, known for their superior resistance to oxidation, corrosion, and thermal degradation. Types: Weld Neck Flange – Ideal for high-pressure and high-temperature systems; offers maximum strength and stability. Slip-On Flange – Easily fits over the pipe and is welded on both sides for secure, easy installation. Blind Flange – Closes off pipelines or pressure vessels with a leak-proof seal. Threaded Flange – Connects to pipes using threads, eliminating the need for welding. Socket Weld Flange – Best suited for small-bore, high-pressure systems with smooth fluid flow. Grades & Chemical Composition: Inconel 600 (UNS N06600): Nickel (Ni): ≥ 72.0% Chromium (Cr): 14.0 – 17.0% Iron (Fe): 6.0 – 10.0% Carbon (C): ≤ 0.15% Manganese (Mn): ≤ 1.0% Silicon (Si): ≤ 0.5% Key Features: Resistant to oxidation, carburization, and chloride-ion stress-corrosion cracking; ideal for heat exchangers and furnace components. Inconel 625 (UNS N06625): Nickel (Ni): ≥ 58.0% Chromium (Cr): 20.0 – 23.0% Molybdenum (Mo): 8.0 – 10.0% Niobium (Nb): 3.15 – 4.15% Iron (Fe): ≤ 5.0% Carbon (C): ≤ 0.10% Key Features: Excellent resistance to pitting, crevice corrosion, and chemical attacks; widely used in chemical processing and marine environments. Inconel 718 (UNS N07718): Nickel (Ni): 50.0 – 55.0% Chromium (Cr): 17.0 – 21.0% Iron (Fe): Balance Niobium + Tantalum (Nb + Ta): 4.75 – 5.50% Molybdenum (Mo): 2.80 – 3.30% Titanium (Ti): 0.65 – 1.15% Aluminum (Al): 0.20 – 0.80% Carbon (C): ≤ 0.08% Key Features: High strength, creep resistance, and corrosion resistance at elevated temperatures; excellent fatigue and stress rupture performance; commonly used in aerospace, turbines, and high-stress industrial components. PN 6 Rating: The PN 6 designation indicates a nominal pressure class of 6 bar (approximately 87 psi). These flanges are suited for medium-pressure systems where both corrosion resistance and mechanical integrity are critical. Features: High-Temperature Strength: Maintains mechanical integrity and structural stability even under extreme heat. Exceptional Corrosion Resistance: Resistant to acids, seawater, oxidation, and stress-corrosion cracking. Long-Term Durability: Engineered for long service life in harsh environments, minimizing maintenance and replacement needs. High Strength: Withstands high mechanical loads and thermal cycling without deformation or failure. • Industry Versatility: Ideal for use in offshore drilling, nuclear plants, aerospace systems, petrochemical equipment, and high-performance industrial piping. • Precision Manufacturing: Tight dimensional tolerances ensure secure, leak-proof connections and system efficiency. Ladhani Metal Corporation ensures every DIN 2558 Inconel Flange is produced using advanced techniques and thoroughly inspected for quality and compliance. Whether used in extreme heat, corrosive environments, or high-stress systems, these flanges deliver the reliability and performance needed to maintain operational excellence. #din2558 #din2558flanges #din2558inconelflanges #flanges #flangessupplier

The DIN 2558 Super Duplex Flange PN 6 is a high-performance piping component engineered for the most demanding industrial applications. Designed in accordance with DIN (Deutsches Institut für Normung) specifications, these flanges are manufactured from premium-grade super duplex stainless steel, offering outstanding mechanical strength and superior corrosion resistance, particularly in aggressive environments. Supplied by Ladhani Metal Corporation, these flanges are trusted by industries that require durability, safety, and long-lasting performance. Super duplex flanges are widely used in offshore oil and gas, petrochemical, chemical processing, desalination, and marine applications where resistance to stress corrosion cracking, pitting, and erosion is essential. The PN 6 pressure rating (6 bar or approximately 87 psi) makes them suitable for medium-pressure systems requiring robust and corrosion-resistant connections. Types: Weld Neck Flange – Offers a strong welded connection ideal for high-pressure and high-temperature systems. Slip-On Flange – Easy to install and weld, suitable for lower-stress applications. Blind Flange – Used to seal off the end of a pipeline, ensuring zero leakage. Threaded Flange – Provides a screw-type connection where welding isn’t preferred. Socket Weld Flange – Ideal for small-diameter, high-pressure applications requiring a smooth bore and secure weld. Grade & Chemical Composition: Super Duplex 2507 (UNS S32750): Chromium (Cr): 24.0 – 26.0% Nickel (Ni): 6.0 – 8.0% Molybdenum (Mo): 3.0 – 5.0% Nitrogen (N): 0.24 – 0.32% Manganese (Mn): ≤ 1.2% Silicon (Si): ≤ 0.8% Carbon (C): ≤ 0.03% Iron (Fe): Balance Key Properties: Exceptional resistance to chloride-induced stress corrosion cracking, pitting, and crevice corrosion High tensile and yield strength—almost double that of conventional austenitic stainless steels Outstanding performance in seawater and chemically aggressive environments PN 6 Rating: The PN 6 pressure rating corresponds to 6 bar (approximately 87 psi), making this flange ideal for medium-pressure pipelines where superior strength and corrosion resistance are required for safe and long-lasting operation. Features: Corrosion Resistance: Excellent resistance to both uniform and localized corrosion, even in chloride-rich environments such as seawater. High Mechanical Strength: Delivers outstanding load-bearing capacity, enabling the use of thinner wall sections for lighter system design. Long Service Life: Built for durability in extreme conditions, reducing maintenance and replacement costs over time. Stress Corrosion Resistance: Provides safety in high-stress, high-temperature, and aggressive chemical conditions. Industry Versatility: Widely used in offshore platforms, chemical plants, desalination units, marine vessels, and high-performance piping systems. Cost Efficiency: High strength and corrosion resistance allow for optimized system design with reduced material usage. Ladhani Metal Corporation ensures that each DIN 2558 Super Duplex Flange is manufactured using advanced technology and strict quality control processes. These flanges deliver the strength, reliability, and corrosion resistance required in the most challenging industrial applications—offering a dependable, long-term solution for critical infrastructure. #din2558 #din2558flanges #din2558superduplexflanges #flanges

The DIN 2558 Duplex Flange PN 6 is a high-quality, precision-engineered piping component designed to deliver exceptional mechanical strength and corrosion resistance in harsh industrial environments. Manufactured to DIN (Deutsches Institut für Normung) standards, these flanges are produced using premium duplex stainless steels, which combine the benefits of both austenitic and ferritic stainless steels. Ladhani Metal Corporation supplies these flanges with a strong focus on durability, reliability, and performance under challenging operating conditions. Duplex flanges are widely used in industries such as oil and gas, petrochemical, marine, desalination, pulp and paper, and chemical processing—where resistance to stress corrosion cracking, pitting, and crevice corrosion is essential. The PN 6 pressure rating (6 bar or approximately 87 psi) makes these flanges suitable for medium-pressure systems that demand both structural integrity and long service life. Types: Weld Neck Flange – Provides a robust, welded connection ideal for high-stress, high-temperature applications. Slip-On Flange – Offers ease of installation and is welded on both the inner and outer surfaces for a secure fit. Blind Flange – Used to close the end of a pipe system, ensuring leak-tight sealing. Threaded Flange – Allows for easy, non-welded connection to piping systems with threaded ends. Socket Weld Flange – Ideal for smaller-diameter high-pressure lines, offering smooth flow and strong connections. Grades & Chemical Composition: Duplex 2205 (UNS S31803/S32205): Chromium (Cr): 21.0 – 23.0% Nickel (Ni): 4.5 – 6.5% Molybdenum (Mo): 2.5 – 3.5% Manganese (Mn): ≤ 2.0% Silicon (Si): ≤ 1.0% Nitrogen (N): 0.14 – 0.20% Carbon (C): ≤ 0.03% Iron (Fe): Balance Key Features: Excellent resistance to pitting, crevice corrosion, and chloride-induced stress corrosion cracking. Superior strength compared to standard stainless steels PN 6 Rating: The PN 6 rating signifies a nominal pressure capacity of 6 bar (approximately 87 psi), making these flanges suitable for medium-pressure applications in both industrial and marine systems where enhanced corrosion resistance and mechanical strength are required. Features: Corrosion Resistance: Excellent resistance to a wide range of corrosive environments, especially chlorides and sulfides. High Strength: Duplex steel offers nearly twice the strength of conventional austenitic stainless steel, reducing wall thickness and weight. Stress Corrosion Resistance: Ideal for applications involving aggressive media and fluctuating temperatures. Longevity: Designed to offer extended service life with minimal maintenance in severe environments. Versatile Use: Applicable in offshore platforms, chemical plants, desalination systems, and high-performance piping networks . Cost-Efficient: Combines strength and corrosion resistance, often allowing for reduced material thickness and overall system weight. Ladhani Metal Corporation ensures that each DIN 2558 Duplex Flange is precision-machined and rigorously tested to meet or exceed international standards. These flanges offer a reliable, leak-proof solution for critical piping systems, balancing performance, safety, and long-term value.

The DIN 2558 Stainless Steel Flange PN 6 is a high-performance, precision-engineered component designed to meet the stringent demands of modern industrial piping systems. Manufactured in accordance with the DIN (Deutsches Institut für Normung) standard, this flange is available in a range of high-quality stainless steel grades that provide excellent resistance to corrosion, high temperatures, and mechanical stresses. Ladhani Metal Corporation is a trusted supplier of these flanges, delivering products that are known for their exceptional durability, reliability, and long-lasting performance. These flanges are used in a variety of industries, including chemical, petrochemical, food processing, pharmaceutical, and water treatment. Whether for general-purpose applications or more specialized uses in high-pressure or high-temperature environments, the DIN 2558 SS flange offers versatility and safety. The PN 6 pressure rating makes them ideal for medium-pressure systems, ensuring a reliable and leak-proof connection that will withstand the test of time. Ladhani Metal Corporation ensures that each flange is produced with precision, using advanced manufacturing processes and premium materials to meet the highest industry standards. Types: Weld Neck Flange – Ideal for high-pressure applications, it is welded directly to the pipe, providing a robust, leak-free connection. Slip-On Flange – Slides over the pipe and is welded both inside and outside for easier installation and cost-effectiveness. Blind Flange – Used to seal the end of a piping system, preventing the flow of fluids or gases. Threaded Flange – Features internal threads for easy connection to the pipe without requiring welding. Socket Weld Flange – Typically used for small-diameter high-pressure systems, providing a smooth bore for fluid flow. Grades & Chemical Composition: Grade 304: Carbon (C): ≤ 0.08% Chromium (Cr): 18.0 - 20.0% Nickel (Ni): 8.0 - 10.5% Manganese (Mn): 2.0% max Silicon (Si): 1.0% max Phosphorus (P): 0.045% max Sulfur (S): 0.03% max Offers excellent corrosion resistance and is widely used in food processing, chemical, and petrochemical industries. Grade 316: Carbon (C): ≤ 0.08% Chromium (Cr): 16.0 - 18.0% Nickel (Ni): 10.0 - 14.0% Molybdenum (Mo): 2.0 - 3.0% Manganese (Mn): 2.0% max Silicon (Si): 1.0% max Phosphorus (P): 0.045% max Sulfur (S): 0.03% max Known for its superior resistance to corrosion, especially in chloride-rich environments like seawater. Grade 321: Carbon (C): ≤ 0.08% Chromium (Cr): 17.0 - 19.0% Nickel (Ni): 9.0 - 12.0% Titanium (Ti): 5 times the carbon content, minimum 0.3% Manganese (Mn): 2.0% max Silicon (Si): 1.0% max Phosphorus (P): 0.045% max Sulfur (S): 0.03% max Offers enhanced high-temperature stability and resistance to sensitization, making it suitable for applications involving elevated temperatures, such as heat exchangers, and in chemical industries. PN 6 Rating: The PN 6 rating corresponds to a pressure class of 6 bar (approximately 87 psi), making it suitable for medium-pressure applications in a variety of industrial settings. Features: • Corrosion Resistance: Stainless steel provides excellent protection against rust, corrosion, and staining, ensuring reliability even in harsh environments. • High Strength: These flanges deliver superior tensile strength and durability under both high and low-pressure conditions. • Versatile Applications: Suitable for use in chemical, petrochemical, food, pharmaceutical, and water treatment industries. • Easy Installation: The flanges are designed for straightforward welding and installation, providing secure, leak-proof connections. • Long-Lasting Performance: Ladhani Metal Corporation's SS flanges are engineered to offer a long service life, minimizing the need for maintenance and replacements. Ladhani Metal Corporation ensures that each DIN 2558 SS flange is manufactured to meet the highest quality standards, offering both performance and cost-effectiveness for various industrial piping systems.

Being one of the leading organization in the market, highly involved in offering a broad range of Dished Ends as per DIN 28011 And DIN28013 to our esteemed customers. Our offered products are manufactured suing utmost quality raw material which is obtained from the authentic vendor if the supplier. Moreover, these products are accessible in different sizes and dimensions to suit the varied demands and needs of our customers.We Manufacture and Export Types Of Dishends / Endcaps / Heads ELLIPSOIDAL HEAD HEMISPHERICAL HEAD. TORISPHERICAL HEAD KLÖPPER HEAD KORBBOGEN HEAD Semi ellipsoidal head DIN28013 Flat dished heads Standard Flat dished heads Flat heads Convex Discs Plate Type Heads Diffuser Heads Cone , Bulk & Tank Vehicle Heads Weld Counstriction Special Pressed part Experienced In Making Grades Like Carbon steel,P265-GH, 16Mo3,15NiCuMoNb5, CrMo(V), Alloy steel, 10CrMo9-10,13CrMo4-5,ASME SA 387 Gr.11,Gr12,ASME SA 387 Gr.91,P355-Gh,-NH,-NL1,-NL2,ASME SA 516 Gr.60 , Gr.70,Stainless steel 1.4301,1.4307,1.4404,1.4541,1.4571,1.4539,1.4501,Stainless steel ASME SA240 304,304L,316,316l,321,321H,316Ti,904L,2205,Super Duplex 1.4462 , cr25,Nickel alloys Alloy 20,59,200,MONEL 400,INCONEL 600,601,625,INCOLOY 800,825, 825,Copper,Titanium Grade 2,Grade 5, Aluminium Test method: Impact -Test acc. to DIN EN 10045-2 Tensile test acc to DIN EN 10002-1 , ISO 6892-1 , ASTM A 370 Hot tensile test acc to DIN EN 10002-5 until 900°C Hardness Test acc. to Brinell and DIN EN ISO 6506-1 Testing of intercrystalline corrosion acc to ISO 3651-2 (A) , ASTM A 262 Pract. E X – Ray -Examination acc. to EN 1435 , ISO 5817 , ASME V Art.2 , VIII Div.1 § UW -51 UT - Ultrasonic testing acc. to EN 10160 , EN 10307 , ASME SA-578 , ASME SA-435 PT - Penetrant testing acc. to EN 571 , ASME V Art.6 , ASME VIII Div.1 App.8 MT- Magnetic particle testing acc. to EN 1291 , ASME V Art.7 , ASMEVIII Div.1 App.6 Certificate: Certificate acc. to EN 10204 - 3.1 and 3.2 from independent organization

Distributor & High Volume Supplier CP Titanium – Commercially Pure Titanium Titanium CP4 – Grade 1 Commercially Pure Titanium Grade 1 is the softest titanium and has the highest ductility. It has good cold forming characteristics and provides excellent corrosion resistance. It also has excellent welding properties and high impact toughness. Applications Architecture, Automotive Desalination, Dimensional Stable Anodes, Medical, Marine, Processing & Chlorate Manufacturing Standards ASME SB-363, ASME SB-381, ASME SB-337, ASME SB-338, ASME SB-348, ASTM F-67, ASME SB-265, ASME SB-337, ASME SB-338 Forms Available Bar, Flanges, Forgings, Sheet, Welding Wire Titanium CP3 – Grade 2 Commercially Pure Titanium Grade 2 has moderate strength and excellent cold forming properties. It provides excellent welding properties and has excellent resistance to oxidation and corrosion. Applications Aerospace, Automotive, Chemical Processing & Chlorate Manufacturing, Desalination, Architecture, Hydro Carbon Processing, Marine, Medical, Power Generation Standards ASME SB-363, ASME SB-381, ASME SB-337, ASME SB-338, ASME SB-348, ASTM F-67, AMS 4921, ASME SB-265, AMS 4902, ASME SB-337, ASME SB-338, AMS 4942 Forms Available Bar, Fittings, Flanges, Forgings, Pipe, Plate, Sheet, Tube, Welding Wire, Wire Titanium CP2 – Grade 3 Commercially Pure Titanium Grade 3 is stronger and less formable than Titanium Grades 1 and 2. It is used in Aerospace and industrial applications that require moderate strength. Grade 3 titanium has excellent corrosion resistance. Applications Aerospace, Architecture, Automotive, Chemical Processing & Chlorate Manufacturing, Desalination, Hydro Carbon Processing, Marine, Medical, Power Generation, Standards ASME SB-363, ASME SB-381, ASME SB-337, ASME SB-338, ASME SB-348, ASTM F-67, AMS 4921, ASME SB-265, AMS 4902, ASME SB-337, ASME SB-338, AMS 4942 Forms Available Bar, Fittings, Flanges, Forgings, Pipe, Plate, Sheet, Tube, Welding Wire, Wire Titanium CP1 – Grade 4 Commercially Pure Titanium Grade 4 is stronger than CP Grades 2 & 3 – it can be cold formed, but has lower ductility. It has excellent corrosion resistance in a wide variety of environments. Grade 4 titanium is commonly used in Aerospace, Industrial and Medical applications where high strength is needed. Applications Aerospace, Chemical process, Industrial, Marine, Medical Standards ASME SB-363, ASME SB-381, ASME SB-337, ASME SB-348, ASTM F-67, AMS 4921, ASME SB-265, AMS 4901, ASME SB-338 Forms Available Bar, Forgings, Sheet, Welding Wire, Wire Titanium Grade 7 Titanium Grade 7 has physical and mechanical properties equivalent to CP3 titanium or Grade 2. It has excellent welding and fabrication properties and is extremely resistant to corrosion especially from reducing acids. Applications Chemical Processing, Desalination, Power generation Standards ASME SB-363, ASME SB-381, ASME SB-337, ASME SB-338, ASME SB-348, ASME SB-265, ASME SB-337, ASME SB-338, Forms Available Bar, Forgings, Plate, Sheet, Tube, Welding Wire, Wire Titanium Grade 11 – CP Ti-0.15Pd Titanium Grade 11 is highly resistant to corrosion has similar physical and mechanical properties to Titanium CP Grade 2. Applications Chemical processing, Desalination Power generation, Industrial Standards ASME SB-338 Forms Available Tube Titanium Based Alloys Titanium Grade 5 – Titanium 6Al-4V Titanium Grade 5 alloy is the most commercially available of all titanium alloys. It offers an excellent combination of high strength and toughness. Grade 5 titanium has good welding and fabrication characteristics. Applications Aerospace, Chemical Processing, Marine, Medical Standards ASME SB-265, AMS 4911, ASME SB-348, AMS 4928, AMS 4965, AMS 4967 Forms Available Titanium Grade 6 – Titanium 5Al-2.5Sn Titanium Grade 6 alloy offers good weldability, stability and strength at elevated temperatures. Applications Aerospace Standards ASME SB-381, AMS 4966, MIL-T-9046, MIL-T-9047, ASME SB-348, AMS 4976, AMS 4956, ASME SB-265, AMS 4910, AMS 4926 Forms Available Bar, Forgings Plate, Sheet, Wire Titanium Grade 9 – Titanium 3Al-2.5V Titanium Grade 9 has medium strength that falls between Grade 4 and Grade 5. It has excellent corrosion resistance and is used in Aerospace and Industrial applications. Grade 9 Titanium can be used at higher temperatures than Grades 1 through 4. Grade 9 titanium has good cold rolling properties. Applications Aerospace, Automotive, Chemical processing, Consumer applications, Marine, Medical, Transportation Standards AMS 4943, AMS 4944, ASME SB-338 Forms Available Bar, Forgings Plate, Sheet, Wire Titanium Grade 12 – Ti-0.3-Mo-0.8Ni This Titanium Grade 12 alloy is similar to Titanium Grades 2 and 3 except that Titanium Grade 12 has 0.3% molybdenum and 0.8% nickel. This offers enhanced corrosion resistance. Applications Chemical processing, Desalination, Power generation, Industrial Standards ASME SB-338 Forms Available Tube Titanium Grade 19 – Titanium Beta C Titanium Grade 19 has very high strength and can be heat treated. It offers good resistance to stress and corrosion. Applications Aerospace Automobile Standards MIL-T-9046, MIL-T-9047, ASME SB-348, AMS 4957, AMS 4958, ASME SB-265 Titanium Grade 23 – Titanium 6Al-4V ELI Titanium Grade 23 is similar to Grade 5 but has lower oxygen, nitrogen and iron. It has better ductility and fracture toughness than Titanium Grade 5. Applications Aerospace, Chemical Processing, Marine, Medical Standards AMS 4911, AMS 4928, AMS 4930, AMS 4931, AMS 4935, AMS 4965, AMS 4967, AMS 4985, AMS 4991, MIL -T-9046, MIL -T-9047, BSTA 10,11,12, BSTA 28,56,59, DIN 3.7165, AMS 4907 ELI, AMS 4930 ELI, AMS 4956 ELI, ASTM F136 ELI, UNS R56407 Forms Available Bar, Forgings, Plate, Sheet, Welding Wire, Wire Titanium 6Al-6V-2Sn – Titanium 6-6-2 Titanium 6-2-4-2 has excellent strength, stability, and creep resistance to temperatures as high as 550 °C. Applications Gas, Turbine Compressor Engine afterburner, Aerospace Standards AMS 4919, AMS 4952, AMS 4975, DIN 3.7164, GE B50 TF22, GE B50TF21, GE B50TF22, GE C50TF7, MIL F-83142, MIL T-9046, MIL T-9047, PWA 1220, UNS R54620 Forms Available Bar, Plate, Sheet Titanium 6Al-2Sn-4Zr-2Mo – Titanium 6-2-4-2 Titanium 6Al-6V-2Sn is a two-phase, Alpha Beta Alloy. It is usually used in the annealed or solution treated and aged conditions. It’s a heat treatable, high strength alloy with lower toughness and ductility than Titanium Grade 5 (6Al-4V) and it’s difficult to weld. Cold forming of Titanium 6Al-6V-2Sn is difficult because of its high strength and the large amount of spring-back that results. This grade can be welded by the inert gas shielded, fusion welding process but the heat effected area will have less ductility and toughness than the parent material. The hardness of Titanium 6-6-2 is approximately Rockwell C 36-38. This grade is primarily used for airframe and jet engine parts, rocket engine cases and ordinance components. Please call us to determine our minimum item quantity. Applications Airframe Components, Jet Engine Parts, Ordinance Components, Rocket Engine Cases Standards AMS 4981, MIL-T-9047, Forms Available Bar, Wire Sheet, Plate, Forgings, Fittings, Flanges, Seamless Pipe, Seamless Tube, Welded Pipe, Welded Tube Titanium 6Al-2Sn-4Zr-6Mo – Titanium 6-2-4-6 Titanium 6Al-2Sn-4Zr-6Mo is an Alpha-Beta Alloy and it’s generally regarded as the workhorse alloy of the titanium industry. The alloy is fully heat-treatable in section sizes up to one inch and is used up to approximately 400°C (750°F). Since it is one of the most commonly used alloys (over 70% of all alloy grades melted are a sub-grade of Ti-6-4,) its uses span many aerospace engine and airframe components. Titanium 6Al-2Sn-4Zr-6Mo is also used in lots of non-aerospace applications such as marine, offshore and power generation industries. This Alpha-Beta Alloy combines good corrosion resistance and strength with weldability and fabricability. The alloy is generally available in bar form and it’s typically used in deep sour well applications. This alloy can be hot or cold formed. Please call us to determine our minimum item quantity. Applications Aerospace Engines, Airframe Components, Marine Applications, Offshore Applications, Power Generation Applications Standards AMS 4981 Forms Available Bar, Plate, Sheet Titanium 8Al-1Mo-1V – Titanium 8-1-1 Titanium 8Al-1Mo-1V is a near Alpha Alloy that was primarily designed for use at elevated temperatures – up to 455 degrees centigrade. It offers the highest modulus and lowest density of all Titanium alloys. It has good creep strength and it’s weldable by the inert gas fusion and resistance-welding processes. Titanium 8Al-1Mo-1V is used in the annealed condition for such applications as airframe and jet engine parts that demand high strength, superior creep resistance and a good stiffness-to-density ratio. The machinability of this grade is similar to that of Titanium 6Al-4V. Please call us to determine our minimum item quantity. Applications Airframe Parts, Jet Engine Parts Standards MIL-T-9046, MIL-T-9047, AMS 4972, AMS 4915, AMS 4973, AMS 4955, AMS 4916 Forms Available Forgings, Bar, Sheet, Plate, Strip, Extrusions, Wire Titanium 10V-2Fe-3Al Titanium 10V-2Fe-3Al is a Titanium Beta Alloy. It is harder and stronger than many titanium alloys. This Titanium is a heat treatable alloy, it’s weldable and it’s easily formed. Titanium 10V-2Fe-3Al is an all Beta Alloy and is more difficult to machine than most titanium alloys. The chief problems include flank wear, spring-back and chip control. Because of these characteristics, positive rake chip grooves in combination with light hones on the cutting edge are advantageous. Please call us to determine our minimum item quantity. Applications Airframe Components, Compressor Blades, Disks, Wheels and Spacers Standards AMS 4983, AMS 4984, AMS 4986, AMS 4987 Forms Available Bar, Forgings, Plate, Sheet, Seamless Pipe, Seamless Tube, Welded Pipe, Welded Tube, Wire Titanium 15V-3Cr-3Sn-3Al This Metastable-Beta Alloy is used primarily in sheet metal form. It is age-hardenable and highly cold-formable. Titanium 15V-3-3-3 is often used to replace hot-formed Titanium Grade 5 (6Al-4V) sheet. It can also be produced as foil and is an excellent alloy for castings. For aerospace applications, this grade is often specified as AMS 4914. Please call to determine the minimum item quantity. Applications Aerospace Tank Applications, Airframe Applications, Castings, Fasteners High Strength Hydraulic Tubing Standards AMS 4914, ASTM B265 Forms Available Sheet, Foil Titanium Alpha Alloys Commercially pure titanium and alpha alloys of titanium are non-heat treatable and have very good welding characteristics. Applications Cryogenic applications, Airplane parts, Chemical processing equipment Standards AMS 4973, AMS 4976, AMS 4924, AMS 4972, MIL-T-9047, AMS 4910, ASTM B265, GR-6 MIL-T9046, AMS 4909, AMS 4915/4916, AMS 4966, AMS 4924, AMS 4973, AMS 4933, MIL-T-81556A A-1, MIL-T-81556A A-2, MIL-T-81556A A-4 Forms Available Bar, Forgings, Plate, Sheet Extrusions Titanium Beta Alloys Titanium Beta or near Beta Alloys are: Fully heat treatable Generally weldable Capable of high strengths Possess good creep resistance up to intermediate temperatures In the solution treated condition, excellent formability can be expected from Beta Alloys Titanium Beta Alloys are ideal for sporing applications. Common Titanium Beta Alloys include: Ti3Al8V6Cr4Mo4Zr ASTM Grade 19 Ti-3Al-8V-6Cr-4Mo-4Zr AMS 4983, 4984, 4987 Ti-10V-2Fe-3Al ASTM Grade 21 Ti-15Mo-3Nb-3Al-2Si AMS 4914 Ti-15V-3Cr-3Sn-3Al The Metastable Titanium Beta Alloys are heat treatable by solution treatment and ageing. Fully stable beta alloys can only be annealed. Applications Aerospace, Standards AMS 4914, AMS 4983, AMS 4984, AMS 4987, ASTM Grade 19, ASTM Grade 21 Forms Available Forgings Titanium Alpha-Beta Alloys Titanium Alpha Beta alloys are heat treatable and most of them are also weldable. The typical properties of Titanium Alpha Beta Alloys are: Medium to high strength levels; High temperature creep strength is not as less than most alpha alloys; Limited cold forming but hot forming qualities are normally good; The most commonly used Titanium Alpha Beta Alloy is Ti 6Al-4V. Titanium 6Al-4V has been developed in many variations of the basic formulation for numerous and widely differing applications. Other Titanium Alpha Beta Alloys include: 6Al-4V-ELI 6Al-6V-2Sn 6Al-2Sn-4Zr-2Mo 3Al-2.5V 8Mn Applications Aircraft and aircraft turbine parts, Chemical processing equipment, Marine hardware, Prosthetic devices Standards ASME SB-265, AMS 4911, ASME SB-348, AMS 4928, AMS 4965, AMS 4967, AMS 4981, MIL-T-9047, AMS 4930, AMS 4971, AMS 4907, ASTM F 136, MIL-T-9046, AMS 4918, DMS1879/2237, AMS 4908, AMS 4943, ASTM B348, AMS 4975, MIL-T-9047 G, AMS 4928, BMS 7-348, DMS 1570, AMS 4976, AMS 4920, AMS 4934 Forms Available Bar, Fittings, Flanges, Forgings, Pipe, Plate, Sheet, Tube, Wire Titanium Metals Titanium Specifications Titanium Grades CP4 – Grade 1 CP3- Grade 2 Titanium CP2 – Grade 3 CP1 – Grade 4 Grade 7 Grade 11 – CP Ti-0.15Pd Grade 5 – Titanium 6Al-4V Grade 6 – Titanium 5Al-2.5Sn Grade 9 – Titanium 3Al-2.5V Grade 12 – Ti-0.3-Mo-0.8Ni Grade 19 – Titanium Beta C Grade 23 – Titanium 6Al-4V ELI 6Al-6V-2Sn 6Al-2Sn-4Zr-2Mo 6Al-2Sn-4Zr-6Mo 8Al-1Mo-1V 10V-2Fe-3Al 15V-3Cr-3Sn-3Al Alpha Alloys Beta Alloys Alpha-Beta Alloys Titanium Dioxide TiO2 Titanium Applications Titanium Sheets Titanium Plates Titanium Wire Titanium Tubes & Tubing Titanium Round Bar Titanium Pipe We stock and sell Commercially Pure Titanium and Titanium Alloys in a broad range of forms and sizes. We can deliver production quantities in 90-120 days. close Request A Quote close Home Services Industries Resources About Contact Blog RFQ Sitemap

DIN 2573 Carbon Steel Flanges PN 6 are robust, low-pressure plate flanges manufactured from high-quality carbon steel, specifically developed for general-purpose applications in non-corrosive to mildly corrosive environments. These flanges are designed in accordance with the DIN 2573 standard and are widely used in industrial piping systems where moderate strength and affordability are key requirements. Their simple design and ease of installation make them suitable for low-pressure fluid transfer, air, steam, and water systems across various industries. Ladhani Metal Corporation is a reputable manufacturer and exporter of carbon steel flanges, offering products that adhere to strict international quality and dimensional standards. The DIN 2573 plate flange configuration provides a secure, gasket-sealed connection, ensuring reliable performance even in basic utility and mechanical piping systems. Pressure Rating: • PN 6 (6 bar / 87 psi): Suitable for low-pressure applications involving air, water, oil, and non-aggressive fluids in industrial or mechanical systems. Flange Types: • Plate Flanges Flat flanges designed for easy bolting and gasket sealing, offering a reliable connection in low-pressure systems. • Flat Face (FF) Flanges Ideal for systems using cast iron or non-metallic components, these flanges provide uniform gasket compression and reduce the risk of flange distortion. • Slip-On Flanges These flanges slide over the pipe and are welded on both sides, ensuring secure attachment and proper alignment in basic fluid and gas systems. • Custom-Machined Flanges Available in a variety of sizes and finishes, custom carbon steel flanges can be tailored to meet project-specific requirements. Carbon Steel Grades and Composition: Carbon Steel A105 (Forged) Composition: • Carbon (C): 0.35% max • Manganese (Mn): 0.60 – 1.05% • Phosphorus (P): 0.035% max • Sulfur (S): 0.040% max • Silicon (Si): 0.10 – 0.35% • Iron (Fe): Balance Applications: A105 carbon steel is commonly used for flanges in ambient and elevated temperature service, especially in oil and gas, water transmission, and mechanical systems. Its good machinability and weldability make it a cost-effective choice for general use. Carbon Steel ST37 / S235JR Composition: • Carbon (C): 0.17 – 0.20% • Manganese (Mn): ≤ 1.4% • Phosphorus (P) and Sulfur (S): ≤ 0.045% • Iron (Fe): Balance Applications: Used in structural piping, water distribution, fire protection systems, and low-pressure industrial piping. ST37/S235JR flanges offer reliable performance in applications where corrosion is minimal and pressure requirements are moderate. Applications of DIN 2573 Carbon Steel Flanges: • Water Distribution Systems: Used in water pipelines, treatment plants, and municipal systems where pressure ratings are low and material strength is sufficient. • HVAC and Utility Systems: Ideal for heating, ventilation, and cooling systems that operate under low pressure with non-corrosive fluids. • Oil and Gas (Low Pressure Segments): Applicable in low-pressure oil pipelines, tank farms, and non-critical utility lines. • General Industrial Piping: Widely used in manufacturing facilities for compressed air, inert gas lines, and general fluid handling. • Fire Protection Systems: Carbon steel flanges are commonly used in fire sprinkler systems and standpipe installations. Key Features: • Manufactured according to DIN 2573 specifications • PN 6 pressure rating for low-pressure fluid and utility applications • Excellent strength, machinability, and weldability • Cost-effective solution for non-aggressive environments • Available in A105, ST37, S235JR, and other carbon steel grades • Suitable for mechanical systems, utilities, and water transmission • Custom face finishes, drilling, and dimensions available Conclusion: DIN 2573 Carbon Steel Flanges PN 6 from Ladhani Metal Corporation offer a durable and economical choice for a wide range of low-pressure applications. Combining structural strength with manufacturing precision, these flanges are ideal for utility piping, water distribution, and general industrial use. For detailed technical support, custom dimensions, or pricing inquiries, contact Ladhani Metal Corporation today. 📞 Contact Ladhani Metal Corporation Website: https://www.ladhanimetal.in/ https://www.ladhanimetal.com/ Email: info@ladhanimetals.com Request a Quote: Custom dimensions, materials, and finishes available upon request

DIN 2573 Super Duplex Flanges PN 6 are high-performance, low-pressure flanges engineered from Super Duplex stainless steels, specifically designed for highly corrosive and mechanically demanding environments. These flanges conform to DIN 2573 standards and offer a superior combination of corrosion resistance and tensile strength, making them suitable for critical applications exposed to aggressive chemicals, seawater, and high-pressure fluids. With enhanced resistance to pitting, crevice corrosion, and stress corrosion cracking, Super Duplex flanges are the material of choice for industries requiring durability under extreme service conditions. Ladhani Metal Corporation is a dependable manufacturer and global supplier of Super Duplex flanges, delivering components that meet international quality and performance standards. The DIN 2573 flat flange design ensures ease of installation and reliable sealing in low-pressure systems, even when operating in harsh chemical or marine environments. Pressure Rating: • PN 6 (6 bar / 87 psi): Designed for low-pressure systems where both exceptional corrosion resistance and superior mechanical strength are critical for long-term reliability and safety. Flange Types: • Plate Flanges Flat disc-type flanges used to join piping systems with bolted connections and gasket seals, ensuring tight, leak-free joints in low-pressure operations. • Flat Face (FF) Flanges Provide even load distribution across the sealing surface, ideal for applications involving non-metallic or cast components where flat gaskets are used. • Slip-On Flanges These flanges slip over the pipe and are welded on both the inside and outside, offering simple alignment and reduced fabrication cost for moderate-stress systems. • Custom-Machined Flanges Engineered to specific client requirements, available in a range of Super Duplex grades, with optional face types, dimensions, and surface finishes. Super Duplex Grades and Composition: Super Duplex 2507 (UNS S32750) Composition: • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 6.0 – 8.0% • Molybdenum (Mo): 3.0 – 5.0% • Nitrogen (N): 0.24 – 0.32% • Iron (Fe): Balance Applications: Super Duplex 2507 is used in highly corrosive applications requiring high strength and fatigue resistance. Common industries include offshore oil and gas, marine systems, desalination plants, and chemical processing where exposure to chloride-rich and high-pressure environments is prevalent. Super Duplex 32760 (UNS S32760) Composition: • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 6.0 – 8.0% • Molybdenum (Mo): 3.0 – 4.0% • Tungsten (W): 0.5 – 1.0% • Copper (Cu): 0.5 – 1.0% • Nitrogen (N): 0.2 – 0.3% • Iron (Fe): Balance Applications: This grade is widely used in oil and gas platforms, subsea pipelines, pressure vessels, and pump components, offering excellent corrosion resistance under fluctuating pressures and temperatures, particularly in seawater and acidic environments. Applications of DIN 2573 Super Duplex Flanges: • Offshore and Subsea Engineering: Ideal for pipelines, risers, and manifolds exposed to saltwater, high pressure, and dynamic stresses. • Chemical Processing Plants: Used in systems handling aggressive chemical media like chlorides, sulfides, and acids, where high corrosion resistance is required. • Oil and Gas Industry: Common in wellhead systems, separators, and refinery units where high mechanical strength and resistance to sulfide stress corrosion are essential. • Power Generation: Used in high-pressure steam systems, flue gas scrubbers, and cooling water systems for their strength and corrosion resistance at elevated temperatures. Key Features: • Compliant with DIN 2573 standard for low-pressure flange systems • Superior resistance to pitting, crevice corrosion, and chloride stress corrosion cracking • Excellent mechanical strength, fatigue resistance, and weldability • Available in Super Duplex 2507, 32760, and other high-alloy grades • Long-lasting performance in aggressive and marine service conditions • Custom sizes, face types, and surface finishes available upon request • Ideal for offshore, oil and gas, power, and chemical process industries Conclusion: DIN 2573 Super Duplex Flanges PN 6 from Ladhani Metal Corporation combine superior corrosion resistance with high mechanical integrity, providing a dependable solution for critical systems operating in aggressive and corrosive environments. Designed in accordance with international standards and backed by expert manufacturing, these flanges offer long-term, leak-free performance in demanding industrial sectors. For customized flange solutions, material selection, or technical assistance, reach out to Ladhani Metal Corporation today. 📞 Contact Ladhani Metal Corporation Website: https://www.ladhanimetal.in/ https://www.ladhanimetal.com/ Email: info@ladhanimetals.com Request a Quote: Custom dimensions, materials, and finishes available upon request.